2g Classmark Change
5
[email protected] - 1st October 2015 (10:30 GMT) where you seen this parameters? As i am using the TEMS release 5, the information of repeated SACCH(ACCH capability) is not indicated there. So, can u suggest the tool, where i see these parameters. Pix - 20th July 2011 (08:36 GMT) Hi, I don't know. It's part of the standard procedure, you'd have to check 3GPP on that one... N.Selvakumar - 18th July 2011 (11:04 GMT) When at all it needs to change the classmark. Why it needs to change Band info and addition of power amplification Selvakumar N - 18th July 2011 (11:00 GMT) Hi Mr.PIX, I know what is classmark. But sometimes classmark change is come under the picture, when at all MS change its capabilities (like Band info, addition of power amplification). How come it changes band info and add the power amplification. That is what i thought to ask. Can you any practical scenario, why it is doing addition of power amplification Regards, Selva N pix - 18th July 2011 (07:53 GMT)
description
2g Classmark Change
Transcript of 2g Classmark Change
[email protected] - 1st October 2015 (10:30 GMT)
where you seen this parameters?As i am using the TEMS release 5,the information of repeated SACCH(ACCH capability) is not indicated there.So, can u suggest the tool, where i see these parameters.
Pix - 20th July 2011 (08:36 GMT)
Hi,
I don't know. It's part of the standard procedure, you'd have to check 3GPP on that one...
N.Selvakumar - 18th July 2011 (11:04 GMT)
When at all it needs to change the classmark. Why it needs to change Band info and addition of power amplification
Selvakumar N - 18th July 2011 (11:00 GMT)
Hi Mr.PIX,
I know what is classmark. But sometimes classmark change is come under the picture, when at all MS change its capabilities (like Band info, addition of power amplification). How come it changes band info and add the power amplification. That is what i thought to ask. Can you any practical scenario, why it is doing addition of power amplification
Regards,Selva N
pix - 18th July 2011 (07:53 GMT)
hi,
The MS sends this message to the network, to list all its capabilities. The network is then aware of what the MS can or cannot do.
Regardspix
N.Selvakumar - 18th July 2011 (06:39 GMT)
Hi,..
Can anyone tell in which practical scenario classmark change comes under the picture.
I know what is the use of classmark. But why classmark change procedure required while location update or CM procedure is ongoing.
Regardsselva n
Pawel - 21st December 2009 (15:52 GMT)
Dear Bijoy,
please let me know where I can find description of below parameters.
BR,Pawel
Bijoy - 21st December 2009 (05:24 GMT)
Oh!!!Pawel,many of the parameters are self explainatory,like es_ind,rf_power_cap etc etc.Name only those which bothers you the most
Br\\Bijoy
Pawel - 18th December 2009 (15:06 GMT)
I know, Bijoy, that there are a lot of parameters.If could encode part of them it would be fine for me:
CLASSMARK_CHANGEmob_station_classrev_level = 2 (0x2)es_ind = 1 (0x1)a5_1_alg_sup = 0 (0x0)
rf_power_cap = 3 (0x3)pseudo_sync_cap = 1 (0x1)ss_screen_ind = 1 (0x1)sm_cap = 1 (0x1)vbs = 0 (0x0)vgcs = 0 (0x0)freq_cap = 1 (0x1)class_3_avail = 1 (0x1)lcsva_cap = 0 (0x0)ucs2 = 0 (0x0)solsa = 0 (0x0)cmsp = 1 (0x1)a5_3_alg_sup = 0 (0x0)a5_2_alg_sup = 0 (0x0)add_mob_station_class_incl = 1 (0x1)add_mob_station_classspare_bit0 = 0 (0x0)const_110 = 6 (0x6)A5 bits structA5/7 = 0 (0x0)A5/6 = 0 (0x0)A5/5 = 0 (0x0)A5/4 = 0 (0x0)Associated Radio Capability 2 = 1 (0x1)Associated Radio Capability 1 = 4 (0x4)r_support_present = 0 (0x0)hscsd_multi_slot_capability_present = 0 (0x0)UCS2 treatment = 0 (0x0)Extended Measurement Capability = 0 (0x0)ms_measurement_capability_present = 0 (0x0)ms_positioning_method_capability_present = 0 (0x0)ecsd_multi_slot_capability_present = 0 (0x0)gsm_8_psk_struct_present = 1 (0x1)gsm 8-PSK StructModulation Capability = 1 (0x1)gsm_8_psk_rf_power_capability_1_present = 1 (0x1)gsm 8-PSK RF Power Capability 1 = 2 (0x2)gsm_8_psk_rf_power_capability_2_present = 1 (0x1)gsm 8-PSK RF Power Capability 2 = 2 (0x2)gsm_400_bands_supported_present = 0 (0x0)gsm_850_associated_radio_capability_present = 1 (0x1)GSM 850 Associated Radio Capability = 4 (0x4)gsm_1900_associated_radio_capability_present = 1 (0x1)GSM 1900 Associated Radio Capability = 1 (0x1)UMTS FDD Radio Access Technology Capability = 1 (0x1)UMTS 3.84 Mcps TDD Radio Access Technology Capability = 0 (0x0)CDMA 2000 Radio Access Technology Capability = 0 (0x0)dtm_gprs_multi_slot_class_present = 1 (0x1)DTM GPRS Multi Slot Class = 3 (0x3)Single Slot DTM = 0 (0x0)dtm_egprs_multi_slot_class_present = 1 (0x1)DTM EGPRS Multi Slot Class = 3 (0x3)single_band_support_present = 0 (0x0)gsm_750_associated_radio_capability_present = 0 (0x0)UMTS 1.28 Mcps TDD Radio Access Technology Capability = 0 (0x0)
GERAN Feature Package 1 = 1 (0x1)extended_dtm_gprs_multi_slot_class_present = 0 (0x0)high_multislot_capability_present = 0 (0x0)geran_iu_mode_capabilities_present = 0 (0x0)GERAN Feature Package 2 = 0 (0x0)GMSK Multislot Power Profile = 0 (0x0)gsm 8-PSK Multislot Power Profile = 0 (0x0)t_gsm_400_bands_supported_present = 0 (0x0)t_gsm_900_associated_radio_capability_present = 0 (0x0)Downlink Advanced Receiver Performance = 0 (0x0)DTM Enhancements Capability = 0 (0x0)dtm_gprs_high_multi_slot_class_present = 0 (0x0)Repeated ACCH Capability = 0 (0x0)spare_bits0_count = 1 (0x1)spare_bits0 = 0 (0x0)
Bijoy - 18th December 2009 (08:50 GMT)
HiLet me know the parameters,I'll try my best to provide the detail
Br\\BijoyThere are just names of parameters with their values. There is no explanation in tools collecting logs which I am using.
BR,Pawel
Bijoy - 18th December 2009 (06:39 GMT)
PawelYou can refer Drive test logs for message details
Br\\Bijoy
Pawel - 17th December 2009 (16:16 GMT)
ps. more detailed description than is TS 44.018
Pawel - 17th December 2009 (16:15 GMT)
Dear all,
do you know where can I find description of Classmark Change message sent by MS to the network?
