LAP-2G - Squarespaceutopialighting1.squarespace.com/s/LAP-2G.pdf · LED LAP-2G LED AREA / PARKING /...
Transcript of LAP-2G - Squarespaceutopialighting1.squarespace.com/s/LAP-2G.pdf · LED LAP-2G LED AREA / PARKING /...
For all applications in site, area, and general lighting requiring high uniformity, excellent vertical light distribution, reduced offsite visibility, reduced on-site glare and effective security light levels.The LAP luminaire delivers exceptional performance in a low-profile design.
LAP-2GAPPLICATION
FEATURES:• Die-cast aluminium construction body on which
electrical components. • Die-cast integral heat sink to provide thermal
management.
MOUNTING:• PMS: Pole mount arm available for 3”, 4” and
5” square pole.• PMR: Pole mount arm available for 3”(PMR3),
4”(PMR4) and 5”(PMR5) dia. round pole.• SF: Adjustable slip fitter mount available for
pipe installation (1-21/32”O.D to 2-3/8”O.D)• WM: Wall mount plate.• Mounting arm bolts are 304 stainless steel and
zinc-plated steel.
LED:• Color Temperature: 3000 / 4000 / 5000K• Color Rendering Index: 70+ CRI.• Nichia LED.• Lifetime: over 50,000 hours.
ELECTRICAL:• Power Efficiency: > 90%• Fixture for ambient minimum operating
temperatures from -40°C to 40°C (110W can reach +50°C).
• Input Voltage: 100V-277V, 50/60Hz.• THD < 20%• Provided with integrated surge protective
device.• Over Voltage Protect : Hiccup mode. The
power supply shall return to normal operation only after the power is turn-on again.
• Short Circuit Protect : No damage shall occur when any output operating in a short circuit condition. The power supply shall be self- recovery when the fault condition is removed.
• Over Temperature Protect : 110°C• Meets ANSI/IEEE C62.41 Category C (out-
doors) High.
OPTIC:• UV stabilized polycarbonate lens.
LISTING:• UL listed.• DLC listed. 2
• Suitable for wet location.• Tested to IESNA LM80 standards. • LM79, LM80.• 5 years limited warranty.• IP66 Rating.• Certified to ANSI C136.31-2010, 3.0G Level 2
for Bridge/Overpass Applications.
LED AREA / PARKING / STREET LIGHT
1 UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.www.utopialightingus.com
MODEL LED COLOR TEMP. DISTRIBUTION VOLTAGE
LAP-2G 72LED108LED141LED
72W108W141W
/50/30/40
5000K (Std.)3000K4000K
T3 Type III UNV 120-277V (Std.)
EXAMPLE: LAP-2G-108LED/50-T3-UNV-DM-BZ-WMORDERING INFORMATION
DIMMING FINISH MOUNTING OPTIONS
DM 0-10V Dimming. (Std.)
BZ Dark Bronze(Std.)
SFWM
PMSPMR3PMR4PMR5
MA
Slip FitterWall MountSquare Pole Mount Arm3” Round Pole Mount Arm4” Round Pole Mount Arm5” Round Pole Mount ArmHorizontal Tenon Mount(Mounts to 2” IP, 2.375” O.D)
TLPC1
TLPC2
TLPC3
FSP-211
RS
Twist Lock Receptacle Photocell 120VTwist Lock Receptacle Photocell 277VTwist Lock Receptacle Photocell 120V - 277V0-10V Dimming Control Occupancy Sensor 1
Remote handheld config-uration tool for FSP-211
LED
Mounting for Round Pole
Mounting for Square Pole
* Optional TLPC shown
Mounting for Slip Fitter
* Weight and Effective Projected Area (EPA) with Square Pole Mounting.
Horizontal Tenon MountWall Mount
Available custom color (RAL)Please provide us withthe RAL number.
Input Rating Lumen Output(lm/w)
Total LumenOutput Drive Current Weight (lbs/kg) EPA Rating
(sq ft max.)
72 72W 123.3 lm 8980 lm 1.4 A 10.57 lbs / 4.7 kg 1.39
108 108W 111.8 lm 11756 lm 2.1 A 12.56 lbs / 5.7 kg 1.56
141 141W 116.7 lm 16877 lm 2.8 A 14.55 lbs / 6.6 kg 1.73
* Contact Factory for more options
NOTES:1. Using in 25ft or above mounting height is not recommended.2. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
LAP-2G
18.22(462.8)
17.74(450.8)
19.01(482.9)
19.49(495.2)
8.7(220.9)
9.7(246.6)
10.4(262.9)
8.7(220.9)
8(200.8)
6.6(168)
1(25.4)
0.39(10.0)
3.5(90)
10.22(259.7)
0.4(10)
2.2(55.4)
2.2(55.4)
2.2(55.4)
2.2(55.4)
2(50.8)
50.0
15.46(392.8)
15.46(392.8)
15.46(392.8)
15.46(392.8)
2(50.8)
0.47(12.0)
72W
Mounting for Round Pole
Mounting for Square Pole Mounting for Slip Fitter
Wall Mount
* Optional FSP-211 shown* Optional TLPC shown
5.7(144.8)
5.7(144.8)
LED AREA / PARKING / STREET LIGHT
2 UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.www.utopialightingus.com
LED
Horizontal Tenon Mount
21.25(539.8)
10.25(259.7)
2.625(66.8)
2.5(63.3)
2.125(55.4)
6(151.5)
15.5(394.8)
LED
LAP-2G
LED AREA / PARKING / STREET LIGHT
UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. 3www.utopialightingus.com
20(513.8)
19.7(500.8)
21(533.8)
21.5(545.2)
8.7(220.9)
9.7(246.6)
10.4(262.9)
8.7(220.9)
8(200.8)
6.6(168)
1(25.4)
0.39(10.0)
3.5(90)
10.22(259.7)
0.4(10)
2.2(55.4)
2.2(55.4)
2.2(55.4)
2.2(55.4)
2(50.8)
50.0
17.47(443.8)
17.47(443.8)
17.47(443.8)
17.47(443.8)
2(50.8)
0.47(12.0)
108W
Mounting for Round Pole
Mounting for Square Pole Mounting for Slip Fitter
Wall Mount
* Optional FSP-211 shown* Optional TLPC shown
5.7(144.8)
5.7(144.8)
UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.
Horizontal Tenon Mount
23.2(588.8)
10.22(259.7)
2.4(62.0)2.5
(64.5)
2.2(55.4)
1.9(49.8)
7.3(184)
8.3(210.0)
5.7(145.0)
5.9(151.5)
17.5(443.8)
LAP-2G
LED AREA / PARKING / STREET LIGHT
4 UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.www.utopialightingus.com
LED
21.7(551.8)
19.5(594.8)22.2
(564.8)
23.5(596.2)
9.7(246.6)
8.7(220.9)
8.7(220.9)
8(200.8)
6.6(168)
1(25.4)
0.39(10.0)
10.22(259.7)
3.5(90)
10.22(259.7)
10.22(259.7)
10.22(259.7)
2.2(55.4)
2.2(55.4)
2.2(55.4)
2.2(55.4)
19.5(494.8)
19.5(494.8)19.5
(494.8)
19.5(494.8)
2(50.8)
0.47(12.0)
2(50.8)
0.47(12.0)
141W
Mounting for Round PoleMounting for Square Pole
Mounting for Slip FitterWall Mount
* Optional FSP-211 shown* Optional TLPC shown
5.7(144.8) 5.7
(144.8)
25.2(639.8)
10.22(259.7)
2.4(62.0)2.5
(64.5)
2.2(55.4)
1.9(49.8)
9.3(235)
8.3(210.0)
5.7(145.0)
5.9(151.5)
19.5(494.8)
Horizontal Tenon Mount
UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.
FSP-211
Description:• The FSP-211 mounts in an outdoor lighting fixture and provides
multi-level control based on motion. The sensor also includes a photocell to measure the ambient light level. It controls 0-10 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, is rated for wet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles.
Wireless Handheld Configuration Tool:• Initial setup and subsequent sensor adjustments are made using
a handheld configuration tool (FSIR-100). This tool enables ad-justment of parameters including high and low modes, sensitivity, time delay, cut off and more. The FSIR-100 is also used to initiate automatic calibration of the FSP-211 ambient light level setpoint. The setpoint is used to hold the controlled lighting off or at low level when there is sufficient daylight. The wireless tool stores up to five sensor parameter profiles to speed configuration of multiple sensors.
Operation:• The sensor ramps lighting On to the selected High mode level
when motion is first detected and the ambient light level is below the hold off setpoint. After the sensor stops detecting movement and the time delay elapses, lights fade to the Low mode level. If there is no motion during the subsequent cut off time delay, the lights will turn Off. If the sensor detects motion before the lights turn Off, it ramps the light level back to High, unless the daylight contribution is sufficient to hold lighting at Low.
Applications:• The slim, low-profile FSP-211 is designed for installation inside the
bottom of a light fixture body. When fully assembled and installed in an IP66-rated fixture, the sensor and FSP-Lx lenses are IP66 outdoor rated. The sensor is ideal for areas such as parking facili-ties, gas stations, pedestrian pathways and warehouses. A choice of four lenses ensures complete coverage for mounting heights up to 40’.
• Provides line voltage On/Off switching and 0-10 VDC dimming control
• Works with ballasts or LED drivers• High and low modes fully adjustable from 0 to 10V• Time delay from 5 to 30 minutes• Optional cut off delay• Adjustable ramp up and fade down times• Optional daylighting setpoint features automatic calibration, or
permits manual adjustment• Configuration tool stores five sensor profiles for quick setup
and adjustment of multiple sensors• Polycarbonate construction; flame retardant, UV resistant,
impact resistant, recyclable• UL244A and UL508; IP66 rated (when fully assembled and
installed) for use in wet locations
• 120/277 VAC, 50/60Hz - Load @120 VAC 0-800W ballast or incandescent - Load @277 VAC 0-1200W ballast
• 230 VAC, 50Hz; Load 0-300W ballast• Relay life rating: 200,000 cycles (120/277 VAC); 50,000
cycles (230 VAC)• High mode: 0-10 V; default 10 V• Low mode: Off, 0-9.8 V; default 1 V• Time delay: 30 sec., 5-30 min.; default 5 min.• Cut off delay: none, 1-60 min. 1-5 hrs.; default 1 hr.• Sensitivity: none, low, med, max; default max• Setpoint: none, 1-250 fc, auto; default 4 fc• Ramp up time: none, 1-60 sec.; default none• Fade down time: none, 1-60 sec.; default none• Operating temperature: -40-167°F (-40-75°C)• Operating Humidity: 20-90%• Weight: 2.8 oz (80 grams)• IP66, CE compliant• TUV, UL and cUL listed• Five year warranty
• Fully adjustable high and low dimmed light levels• Designed for LED fixtures; rated for extreme temperatures and up to 200,000 on/off cycles• Hold off setpoint with automatic calibration option for convenience and added energy savings• Adjustable via handheld wireless configuration tool• IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8’ to 40’• Adjustable time delay and cut off delay
Digital High/Low Passive Infrared Fixture Integrated Outdoor Sensor by Wattstopper
Product Overview
Features Specifications
LED
LED AREA / PARKING / STREET LIGHT
UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. 5www.utopialightingus.com
LED
LED AREA / PARKING / STREET LIGHT
UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice. 6www.utopialightingus.com
Dimming Wiring Diagram
LIN
EG
RN
DLO
AD
FSP-211High/Low PIROccupancy Sensor230 VAC, 50 HZ1200W max ballast
14-18 AWG Solid CU Wire Only
Cla
ss 2
Wiri
ng O
nly
18-2
0 AW
G S
olid
CU
Wire
Onl
y
5E4
1519
5r1
DIM
- (g
rey)
LIN
ED
IM+
(vio
let)
NE
UT
NEUTRAL NEUTRAL
LOAD
GRAY (-)
VIOLET (+)
GROUND *GROUND
* The FSP-211 must be properly grounded.
LOAD
LIN
E
NE
UTR
AL
DimmingDriver
Non-DimmingDriver
NE
UTR
AL
Non-Dimming Wiring Diagram
GR
ND
LOA
D
FSP-211High/Low PIROccupancy Sensor230 VAC, 50 HZ1200W max ballast
14-18 AWG Solid CU Wire Only
Cla
ss 2
Wiri
ng O
nly
18-2
0 AW
G S
olid
CU
Wire
Onl
y
5E4
1519
5r1
DIM
- (g
rey)
LIN
ED
IM+
(vio
let)
NE
UT