27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON...

17
PROCEEDINGS ICTACEM 2007 FOURTH INTERNATIONAL CONFERENCE ON THEORETICAL, APPLIED, COMPUTATIONAL AND EXPERIMENTAL MECHANICS DECEMBER 27-29, 2007 Edited by Prof. S. K. Bhattacharyya Department of Civil Engineering Indian Institute of Technology, Kharagpur, India Dr. D. K. Maiti and Dr. B. N. Singh Associate Professors Department of Aerospace Engineering Indian Institute of Technology, Kharagpur, India DEPARTMENT OF AEROSPACE ENGINEERING INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR 721 302, INDIA

Transcript of 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON...

Page 1: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

PROCEEDINGS

ICTACEM 2007

FOURTH

INTERNATIONAL CONFERENCE

ON

THEORETICAL, APPLIED, COMPUTATIONAL AND

EXPERIMENTAL MECHANICS

DECEMBER 27-29, 2007

Edited byProf. S. K. Bhattacharyya

Department of Civil EngineeringIndian Institute of Technology, Kharagpur, India

Dr. D. K. Maiti and Dr. B. N. SinghAssociate Professors

Department of Aerospace EngineeringIndian Institute of Technology, Kharagpur, India

DEPARTMENT OF AEROSPACE ENGINEERING

INDIAN INSTITUTE OF TECHNOLOGY

KHARAGPUR - 721 302, INDIA

Page 2: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

CONTENTS

KEYNOTE PAPER

PaperNo.

Paper Title Author Pg. No

1 My Life Aboard The International SpaceStation

,America's Vision to Explore The

Moon,Extend Human Presence Across The

Solar System

Mr. Mike Fincke 1

2 Student -Based Development of Space BoomFor A 50kg-Class Micro Satellite

Prof. Y. Sugiyama 2

3 Studies of Turbulent Vortices,Free Surface

Deformation Using Les

Prof. V. C. Patel 3

4 Elevator To Space, Space Slingshot,, Mach 17

Pick-Up

Dr. Surendar K. Gupta 4

5 Uncertainty Quantification in Aircraft

Structural Design

Prof. Ramana V. Grandhi 7

6 Nal's Contributions to Theoretical, Applied,Computational, Experimental Mechanics

Dr. A. R. Upadhyay 10

7 Characterization, Modeling of Mechanical

Properties Of Thermoplastic Nanocomposites

Prof. Samit Roy 11

8 Fluid Mechanics Problems Related to The

Electric Power Industry

Prof. M. S. Sastry 12

9 High Order Methods, High Performance

Computing In Multidisciplinary Technologies

Dr. Vijaya Shanker 13

10 Importance Of Mesh-Free Modeling For

Ultrasonic Nondestructive Evaluation Of

Structures

Prof. T. Kundu 14

11 Combined Path Dependent Elasto-Plastic

Constitutive Model For Geomaterials

Prof. MartaDolezalova 15

12 Current Korean Activities On Research,

Development Of Air-Breathing PropulsionSystems

Prof. Chankduk Kong 16

13 Orbital Mechanics,Attitude Dynamics Of

Satellites Orbiting An Asteroid

Prof. Arun Mishra 17

14 Structure Moving Grid Manipulation In Time

Dependent Flow Field Computations

Dr. Sarat C. Praharaj 19

15 Trends In Non-Invasive Flow Diagnostics - 3d

Measurements

Dr. Rajan Menon 20

16 High-Lift Cfd At Boeing - Innovation

Opportunities

Dr. Anutosh Moitra 23

xiii

Page 3: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

17 Behaviour Of Reinforced Concrete Beam-

Column Joints Under Cyclic Excitation

Prof. Abhijit Mukherjee 24

18 Believing Is Seeing ... The New Paradigm In

Product Design

Mr. Damodar Padhi 25

19 A Hybrid Approach To Structural Health

Management, Prognosis Of Mettalic AerospaceComponents

Prof. Aditi

Chattopadhyay

26

INVITED PAPER LIST

1 Nonlinear Free Flexural Vibration of Oval

Cylindrical ShellsIbrahim S. M.,

Patel B. P., Nath Y

27

2 Effect Of Inhomogeneous Wave Speed OnMode-3 Spontaneous Crack Propagation In

Functionally Graded Materials

Sandip Haldar,

Dhirendra Kubair

30

3 Investigations Into The Optimum Choices Of

Cohesive-Zone Parameters Describing The

Initiation, Propagation Of Cracks

Kingshuk Bose 33

4 Three Dimensional Homogenisation Based

Study Of Effect Of Damage In Unidirectional

Composites

Prabu S, Murari V (C). C.

S. Upadhyay

35

CONTRIBUTORY

2 Finite Element Simulation Of Material

Removal Rate In Electro-Discharge MachiningProcess

Audhesh Narayan. Vinod

Yadava

39

4 Dynamic Stability Of Stiffened Plates With

Cutout

A. K. L. Srivastava, P. K.

Datta, A.H. Sheikh

42

7 Aerodynamic ,Structural Analysis Of

Wind Turbine Blade

Saravanan P.,

Gomathinayagam S.,

Thanigaiarasu S.

45

8 Application Of Second Law Of

Thermodynamics To Solve Convective Heat

Transfer Problems Through Channels,Ducts

M.K. Banerjeel .R.

Banerjee

48

10 SCC With Fly Ash M.B.Varma,

D.K.Bhandare

51

12 Large Deflection Behavior, Dynamic Stability

Of Thin Square Plate Under Periodic

Transverse,In-Plane Loads: An Experimental

Study

R. K. Mitra.K. N. Saha 54

15 Scattering Of Flexural Gravity Waves ByHeterogeneity In Floating Ice Sheets

J. Bhattacharjee,T. Sahoo

57

16 Dynamic Stability OfTwisted Laminated

Composite Cross-Ply Panels

S.K.Sahu, A.V.Asha,

S. Bhutada

60

xiv

Page 4: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

17 Comparative Study Of Airfoil 2312 With,

Without Surface CorrugationsRamprasadh.C, Alfin

Leo.A, S.KJayakrishna

63

21 A Dragonfly Inspired Micro Scale FlappingWing For Insect Like Micro Air Vehicle

Afroz Akhtar, RanjanGanguli

66

22 Construct The Equations Of Coorbital Motion

When The Earth is A Centre Body

W. A. Rahoma, F. A. Abd

El-Salam, M. K. Ahmed

69

25 Transient Response Of Simply SupportedMagneto-Electro-Elastic Beam Using Finite

Element

Atul Daga, N.Ganesan,K. Shankar

72

26Study On Preliminary Structural Design ,

Analysis Of 20 Seats Composite Wig Craft

Changduk Kong,Hyunbum Park,

Jaehuy Yoon

75

27 A Study On The Mrr Of Alumina -

Aluminium Interpenetrating Phase CompositeUsing Electrochemical Grinding (Ecg) Process

G. K. Bose, S. Mitra 77

29 A Note On Constant Pressure Turbulent

Boundary Layers.

A. C. Mandal, J. Dey 80

30 Divergence ,Flutter Of Swept Wings

Subjected To Rolling ManeuverS. A. Fazelzadeh,

E. Rashidi, A. Mazidi

83

32 Static, Cyclic Behaviour Of Steel-Concrete

Composite Girders

C.K. Madheswaran,K. Natarajan, Amar

Prakash, N.Anandavalli

86

34Analysis Of Fgm Structure Using Modified

Differential Quadrature Method

T. Murmu. S.C. Pradhanl 89

35 In-Plane Spontaneous Crack Propagation In

Functionally Graded Materials

Sandip Haldar,

D. V. Kubair

92

36 E-Drive "Automated Vehicles For Physically,Visually Challenged"

L.Srinivasavaradhan,

G.Chandramouli

95

37 Modified Delta Method For LongitudinalParameter Estimation From Flight Data Of

Unstable Aircraft

SinghS. .GhoshA.K 97

38 An Algorithm For Liquid Metal Mhd

Flows

Vetcha Naveen,

Vinayak Eswaran

101

41 Two Dimensional Contaminant TransportModelling Using Meshless Method

Praveen Kumar

Rachakonda,G. R. Dodagoudar

104

42 Numerical Evaluation Of Fracture Parameters

In Functionally Graded Piezoelectric Materials

K. Purushotham Reddy,B.N.Rao

107

XV

Page 5: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

43 Site Specific Modulus Reduction, Damping

Ratio Curves

V. Jaya, G. R.

Dodagoudar, A.

Boominathan

110

44 Study On Damping Behavior Of Er/Mr,

Composite/Viscoelastic S,wich Conical Shell

Using Semi-Analytical Method

Sharnappa, N. Ganesan,

Raju Sethuraman1

113

46 The Optimize Design Of A Square Simply

Supported Isotropic Plate With Central Circular

Hole For Reduction Of Stress Concentration

Subjected To Transverse Static Loading

N.D. Mittal, N.K. Jain 116

47 Fatigue Life Prediction Methodology For

Automotive Spot-Welded Joints

Manikandan R 119

48 A Computational Approach To AnalyzeThe Secondary Motions In A Twin Intake Duct

A N Mullick,B Majumder

121

49 Fatigue Life Of Autofrettaged Pressurised

Cylinders

Hari Krishna Thotakura,

Nageswara Rao B

124

50 Response Of A Projectile To Acoustic,

Entropic Excitation At Hypersonic MachNumber

T. K. Sengupta,A. Dipankar,G. Kumaravel,

Naresh Kumar

126

51 Free Vibration Of Functionally Graded

Cylindrical Shells

Rohit Saha, P. R. Maiti 129

52 Three Dimensional Finite Element Web

Buckling Analysis Of Castellated Beam

N.D.Mittal,

Priyanka Dhurvey

132

53 Static Studies On Laminate Composite BeamOf Piezoelectric

, Magnetostrictive Materials

R. Surya Pratap.N.Ganesan,

S.Swarnamani

135

54 Reliability Analysis Of Flip Chip Electronic

Packages

M. S. Manjunath,B. N. Rao

138

56 Identifying Critical Buckling Temperature Of

Isotropic Beams Using Sound Radiation

P. Jeyaraj, Chandramouli

Padmanabhan,

N. Ganesan

140

57 Relative Comparison Of Cfd Simulation For

Converging Diverging Nozzle By RegulatingExtra Added Pressure Diffusion.

Aditya Agrawal, Nikhil

Mittal, Anoop K. Das

143

58 A Combined Meshless,Two-Level Finite

Element Method For Fracture Analysis

K. N. Rajesha, B. N.

Raob

146

59 Resource-Based Optimal Design Of Truss

Structure Taking Account Of Global, Local

Buckling

Kazuyuki Hanahara,

Yukio Tada

149

60 Pressure Drop Caused By Two-Phase Flow Of

Oil/Water Emulsions Through Sudden

Expansions

Manmatha K. Roul,P. Anil Kishan,

Sukanta K. Dash

152

xvi

Page 6: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

61 Recurrent Neuro Modeling Of Ph

Neutralization Process

Devi. S,Srinivasan. K 156

62 Study On Average Stagnation Pressure,

Effectiveness Of A Sudden Expansion WithFence

Samrat Rao, Somnath

Chakrabarti

159

63 Computation OfDerivatives Of Stress IntensityFactors Using Fractal Finite Element Method

R. M. Reddy, ,B.N. Rao 162

65 Interaction Between A Spanwise ConvertingVortex, An Airfoil

Sharanappa V. Sajjan ,

Tapan. K. Sengupta165

66 Finite Element, Fatigue Analysis Of Riveted

Lap JointKrishna Lok Singh 168

68 One-Dimensional Approach To Ballistic ImpactProblems Using Discrete Finite ElementMethod

Rajesh P Nair,C.Lakshmana Rao

,

B.N.Rao

170

69 Study Of A Wake Induced Instability In A 2d

Incompressible Channel FlowPramodkivmar Bagade,Tapan K. Sengupta

172

70 Bending Of Laminated S,wich Plate Using An

Improved Higher Order Zigzag Theory

M. K. Pandit, A. H.

Sheikh, B.N. Singh175

71 Static, Dynamic Analysis Of Centrifugal Fan

Impeller AssemblySenthil Nathan 178

72 Effect Of Back Pressure On Impact BehaviorOf Composites

Mandar D. Kulkarni,Rahul Goel, N. K. Naik

181

73 Reliability Analysis Of Building Frame Due ToBlast Induced Vibration

Kaushik Dewan,Subrata

Chakraborty

184

76 Analysis Of Thermodynamic Irreversibilities In

Flame Impingement Heat Transfer

G. K. Agrawaf, S. K.

Som, S. Chakraborty

187

78 Identification Of Aerodynamic Model Of

Lattice Fin For Parameter Estimation From The

Flight Data

Misra A., UmaP.,

Singhal A.,Ghosh A.K.,Ghosh K.

190

80 Adhesion Strength Evaluation Of Al AlloyS,wich Composite With Surface Treatement

Kyoungwon Oh, SangjinLee, Hyunbum Park,

Youngkwang Kim ,

Changduk Kong

193

82 Analysis Of 3d Nanopores Using A NearlyExact Bern Solver

Supratik Mukhopadhyay,Nayana Majumdar

195

84 Development Of Damage Indices In Concrete

Beams Under Fatigue

Trisha Sain,J. M.

Chandra Kishen

198

85 Soil Structure Interaction Effects On Corner

Supported Plate Due To Uniformly DistributedLoad

Haider B.,

Chakravorty D.

200

86 Prediction Of Surface Roughness In TurningUsing Artificial Neural Network

Sunil Rajpal 203

xvii

Page 7: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

87 A Continuum Damage Mechanics Model For

Simulation Of Ductile Fracture In Steel

Sachin S. Gautam,

P. M. Dixit

205

88 Estimation Of Damping In Rigid-FlexibleRobotic Systems

Ashish Mohan, S. K.

Saha, S. P. Singh

208

89 Coupled Hdmr-Fft For Failure ProbabilityEstimation

Rajib Chowdhury,B.N. Rao,

A. Meher Prasad

211

90 Superconvergence Of Hl-Galerkin Mixed

Finite Element Methods For Poission Equations

Madhusmita Tripathy ,

Rajen K. Sinha

214

91 Transient Analysis Of Electroosmotic Effects

On The Liquid Flow In A Circular

Nanochannel

A. K. Nayak,S. Bhattacharyya

217

92 Investigation Of Slipping Behavior Of A Rail

Wheelset By Using Bond Graph ModelNilotpal Banerjee, RanjitKarmakar

220

93 Aerodynamic Forces Acting On A Uniform

Flow Past Two Finite Length Circular

Cylinders At Various Staggered Configurations

K.S.V.Reddy ,Kamal

Poddar

223

94 Numerical Solutions Of 2-D SteadyIncompressible Flow In A Driven Square

Cavity

Dalai B. &LahaM. K. 226

96 Avionics Simulation: As Research Platform A.S.Rathore,

R. Thogaivani, Binesh

Kumar, A.P.Kannan

229

97 Role Of Axis-Switching On The Breakup Of

Elliptical Liquid Jets

T.V. Kasyap, D.

Sivakumar, B.N.

Raghunandan

232

98 Optimal Control Of Rotating Cantilever Beam

Using Mfc Actuators,Sensors

Vadiraja D.N, A.D.

Sahasrabudhe

235

101 A Geometrically Consistent IntegrationAlgorithm For Rotation

S. Ghosh,D. Roy 238

102 A New Material Discontinuity Treatment In

Element Free Galerkin Method

C. O. Arun, B.N. Rao,,

M. S. Sivakumar

240

103 Uplift Response Of Plate Anchor Embedded In

Geogrid Reinforced Submerged S, BedIlamparuthi K,

Ravichandran P.T,

Mohammed Toufeeq M.

243

104 Crack Arrest Model For Internally Cracked

Piezoelectric Strip By Variable Load

Distribution On Slide Zones

R. R. Bhargava,Amit Setia

246 '

107 Sound Radiation From A Baffled CompositeRectangular Panel Under A Line Constraint

B. Pattabhi Ramaiah,

B. Rammohan, D. Satish

Babu, G.V. Srinivas,

R. Sundara Murthy

249

xviii

Page 8: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

109 Electroosmotic Flow In Microchannels:

A ReviewAbhishek Sarkar,S. S. Mondal

252

111 Simulation Studies of Auto Navigation ModeFor Mig-27 on Mig-27 Aptt

Yashpal Bhatia. Parvathi

Um, Anil Kulhare

255

113 Response Of Smart Composite Laminate With

R,om Material Properties To R,om LoadingUsing Finite Element Method

D. Nagendra Kumarl,C.S. Upadhyay, D.

Yadav, Gajbir Singh

258

115 Free Vibration Response Statistics Of

Laminated Composite Plates Under Thermal

Loading , Resting On Elastic Foundation With

Uncertain Material Properties

Achchhe Lai, B.N.Singh 261

116 Stochastic Finite Element Analysis of A

Cantilever Bar

Sajna Sayed 264

117 Low Velocity Impact Response OfDelaminated Composite Shells

Amit Karmakar,

Somnath Bhattacharya

267

118 Simulation Of Ballistic Impact On Steel Plate

Using Johnson Cook Material Model

Shimjith.M,C.Lakshmana Rao,

B. N.Rao

269

119 Applicability Of Plastic Kinematic HardeningModel For The Simulation Of Ballistic Impacts

N.Vijayabaskar,C.Lakshmana Rao,

B.Nageswara Rao

271

120 Minimum Weight Design Of Domes UsingBack Propagation Neural Networks

Vesmawala G. R., Desai

C. K„ Desai J. A. &

Patil H. S.

273

121 Opposed Flow Flow Flame Spread Over Thin

Solid Fuels With Free Edge Burning

Chenthil Kumar, Amit

Kumar

275

122 Wrinkling Prediction In Circular Cup DeepDrawing Process Using Bifurcation Criterion

Ravindra Kumar Saxena,

P.M. Dixit

278

123 Element Formulation For 3-D Elasto-PlasticStress Analysis

Ravindra Kumar Saxena,

Prasad Babu, P. M. Dixit

280

124 Experimental, Numerical Stress Analysis OfMulti Axle Heavy Truck Frame Assembly

Chinnaraj K.,

Dr.Sathyaprasad M.,

Dr.Lakshmanarao C.

281

125 Finite Element Analysis Of K-Dominance

Region For Functionally Graded Materials

Aftab Alam, Abhishek

Kumar

284

126 Second Order Statistics Of Nonlinear

Fundamental Frequency OfLaminated

Composite Plates Resting On Elastic

Foundation With Uncertain Foundation

Stiffness Parameters

Achchhe Lai B.N.Singh, 287

127 Modeling ,Simulation Of Environmental

Disturbances For Unmanned Aerial Vehicles

(Uavs)

Jitesh Sachdeva 290

xix

Page 9: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

128 Data Compatibility Check ,Estimation Of

Longitudinal Parameters From Flight DataSingh S., Ghosh A.K. 293

129 Mathematical Modeling Of Tractor-Semi

Trailer Cab Suspension To Study StationaryR,om Response With The Help Of Parametric

Study

Vinayak Pawar. Mahesh

Pardeshi, SanjayBahulikar

296

130 Optimum Design ,Wind Tunnel Testing Of

Tailor Made Airfoils For Endurance Uavs

A. Lurdharaj, S.

Rajagopal, G. Sankar

298

131 Determination Of Optimal Pulse Metal Inert

Gas Welding Parameters Using Neuro-Ga

Technique

Sukhomay Pal. Surjya K.

Pal, Arun K. Samantaray

301

132 Finite Element Bending Characteristics Of

Damaged Composite Clamped CylindricalShell Roofs

Anjan Kumar Acharyya,

Dipankar Chakravorty,Amit Karmakar

304

134 Numerical Solutions To Coupled WavenumbersIn An Infinite Fluid-Filled Elliptic CylindricalShell

Abhijit Sarkar, Venkata

R. Sonti

307

136 Free Vibration Response OfA Plucked StringImpacting Against A Spatial Obstacle

Chandrika P.

Vyasarayani, StephenBirkett, John Mcphee

310

138 Effect Of Floor Modification On The Acoustics

Of Rectangular Cavity In A Confined

Supersonic Flow

Jobin Philip ,Job Kurian 313

139 Time-Domain Finite Element Solution For

Optimal Earth-Moon-Earth Flight Trajectories

S. A. Fazelzadeh,Gh.Ali

Varzandian

316

140 Thermo-Hydraulic Performance Of Solar Air

Heater Having Chamfered Rib-Groove

Roughness On Absorber Plates

Apurba Layek 319

141 Elasticity Solutions For Radialy Polarized

Piezoelectric Infinitely Long Circular Cylinders

Tarun Kant, Payal Desai 321

143 Augmentation Of Heat Transfer From A Solid

Cylinder Wrapped With A Porous Layer

S. Bhattacharyya &A.

Singh

324

144 Crashworthiness Of Glass/Polyester CompositeCylindrical Structures

S.Solaimurugan ,

R.Velmurugan

327

145 Bayesian Framework For Calibration Of Gas

Turbine Simulator Under UncertaintyPiyush Tagade, K.

Sudhakar, S.K. Sane

330

146 Modelling ,Simulation Of Humanoid Robot J.K. Rai, Avinash Kumar,

R.P.Tewari

333

148 Liquid Sloshing In Rectangular Tanks With A

Submerged Block Using Mlpg Approach

P. Pal, S. K.

Bhattacharyya

336

149 Vibration Control Of Typical Nose L,ing Gear

With Torsional Mr Fluid Based Damper

B. Sateesh,D.K.Maiti 339

XX

Page 10: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

150 An Experimental Study On Ultrasonic DrillingOf Commercially Pure Titanium UsingDesigned Experiments

Jatinder Kumar, J.S.

Khamba, S.K. Mohapatra

342

151 Development Of Ann Based Structural Health

Monitoring Scheme For Composite Structures

Bamadev Sahoo, D.K

Maiti

345

152 Numerical Simulation On Concrete Fracture,

Size Effect Using Cohesive Crack Model

Shailendra Kumar,

S. V. Barai

348

156 Finite Element Analysis Of Smart Laminated

Composite Structures Under HygrothermalEnvironment

P. K. Mahato.

D. K. Maiti

351

157 Numerical Investigation Of Path Independent

Integral For A Circular Arc Crack Under

Thermo-Elastic Loading

Debashis Khan,

K. Biswas

354

159 Finite Element Modelling Of Viscoelastic

Composite Rotors

H.Roy, J.K.Dutt,

P.K.DattaH.Roy,J.K.Dutt. P.K.Datta

360

160 Material Modeling Of Shape MemoryAlloys(Sma) In Ansys

Saswati Roy, D.K.Maiti 363

162 Nonlinear Free Vibration Analysis Of

Laminated Composite Plates In Green

Lagrange Sense

Padmanav Dash.

B. N. Singh

366

163 Dynamic Analysis Of Turbine Blades Himanshu Kumar, R. K.

Saxena Vikas Rastogi

369

164 A Neuro-Fuzzy Logic Based Pulse Width

Modulated Three Phase Bridge Vsi For

Interfacing Offshore Wind Farms To Ac Grid

Systems

Lata Gidwani, RajeshKumar

372

166 A Slipline Field Solution To OrthogonalMachining With A Step-Type Chip-BreakerWith Coulomb Friction

Kalipada Maity 375

167 Effect Of Lateral Cyclic Load On Axial

Capacity Of Pile Group In Layered Soil

Sudip Basak 378

169 Pylon Based Injection Into Supersonic Flows Binu Moonjanattu,J. Kurian

381

170 Nonlinear Dynamic Analysis Of Smart

Laminated Composite Plates

J. Sbivakumar,M. C. Ray

384

171 Structured Design Methodology Of Three Loop

Autopilot

Suparna Biswas 387

172 Aeroelastic Analysis Of A Helicopter Rotor

Blade Including Dynamic Stall, DynamicWake Effects

V. Laxman,

C. Venkatesan

390

xxi

Page 11: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

173 Flight Dynamic Modeling , Analysis OfAutonomous Mini Helicopter

B. Seenu, C. Venkatesan 393

174 Structural Damage Detection By SpatialResponse Analysis

Sabyasachi Chandra,

S. V. Barai

396

175 Design, Fabrication, Calibration, Application

Of Single-Hole Probe For Three-Dimensional

Turbomachinery Flow Measurements

N. Sitaram. Varun Singh,S. Anish

399

176 Non Linear Response Of Laminated CompositePlates Under Hygromechanical Loading

Ramesh Pandey, A.K.

Upadhyay, K.K.Shukla,

Anuj Jain

402

177 A Nonlinear Stochastic Buckling Analysis OfLaminated Plates In The Presence Of Static

Damage

A. K. Onkar, C. S.

Upadhyay, D. Yadav

405

178 Free Vibration Analysis Of Laminated

Composite Shell Panel Using Higher Order

Shear Deformation Theory

S. K. Panda-B.N. Singh 408

179 Gear Fault Diagnosis By Wavelet Packet

Decomposition Of Motor Current Signature

Lt.Cdr. R K Sharma, C.

Sujatha, A. S. Sekhar

411

180 Simulation Of 3-D Fatigue Crack PropagationIn A Spur Gear, Calculation Of MeshingStiffness

Maryam Gh. Saryazdi ,

Mohammad Durali

414

181 Design, Fabrication, Calibration, Application

Of Four-Hole Probe For Three-Dimensional

Thin Shear Layer Measurements

N. Sitaram S. UdayaKumar

417

182 A Comparison Of Rk-Fourth Orders Variety OfMeans For Connected Component Detector

Senthilkumar Sukumar 420

183 Flow Field Measurements In The Passages OfDifferent Types Of Diffusers Of A CentrifugalCompressor At Off Design Conditions

N. Sitaram, J. M. Issac M.

Govardhan

423

184 Effect Of Double Row Diffuser On

Performance OfA Centrifugal Compressor

P. M. Banugade ,N.

Sitaram

427

186 Soil Failure By Tillage: A Review Subrata Mandal, A.

Maity

431

187 Inertial Characterization Of Unmanned

Aerial Vehicle Ax-1

Vikas Agarwal, Abhishek

Haider, Rohit Garhwal,

Ashay Gupta, SayanGhosh, Shalabh Saxena,

Dr. Manoranjan Sinha

434

188 Reynolds Number Effects On Five Hole Probe

Measurements

N. Sitaram,Sasi Bhusan 437

189 Pzt Based Impulse Hammer For Modal

AnalysisS B Kandagal 440

xxii

Page 12: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

191 Transient Simulation Of A Hydropower Plant S.S.Lai, J.D.Sharma,

M.K.Singha443

193 Optimal Location Of Piezoelectric Sensors,

Actuators For Vibration Control Of BeamsK. Ramesh Kumar, S.

Narayanan446

194 Analysis , Optimization Of MagnetorheologicalDamper Using Genetic Algorithm

M. Vahedi, F.

Daneshmand

449

195 Unsteady Wake Interferemce Between T,emCylinders In Close Proximity Of A Plane Wall

S. Bhattacharyya & S.

Dhinakaran

452

196 Studies On Metallic Thermal Protection System B.Anandagopal,R.Palaninathan

455

197 Damping Of Vortex Shedding With The

Increase In Angular Velocity For A RotatingCircular Cylinder At Low Reynolds Numbers

Shalabh Saxena, SayanGhosh, Dr. Arnab Roy

458

198 Subsonic Aeroelastic Discrete Gust ResponseAnalysis Of Aircraft Structures In Time

Domain Using Newmark's Method

B.S. Sathish,M. Manjuprasad

461

199 Nonlinear Thermo-Mechanical CylindricalBending Of Functionally Graded Plates

Fallah R, Nosier A. 463

201 Active Flutter Suppression ,Gust Alleviation

Of Piezoelectric Panel By Using OptimalFeedforward, Integral Controller

S. A. Fazelzadeh,S.M.

Jafari

467

203 Pressure Drop Through Diesel Particulate Filter

(DPF): Comparison Between 1- D Correlation,

CFD Simulation

Mohd Mudassir,

D.B.Zodpe470

204 Propagation Of Small Disturbance WavesAcross Rigid-Porous Panels In Plane Channel

Flow

Paul A. R, Sen P. K.,

Hegde S.

473

206 Artificial Neural Network Based Tool

Condition Monitoring In Drilling UsingVibration Signal Analysis

Karali Patra, Surjya K.

Pal, KingshookBhattacharyya

476

207 Bending Of Single Walled Carbon Nanotubes

(Swcnt)Sarosh Quraishi 479

208 Finite Element Analysis Of Micro Extrusion

ProcessT. Jagadeesh ,

P. M. Dixit 482

209 An Investigation Of Transonic Limit CycleOscillations Of Airfoils

Somenath Mukherjee,Ralph Voss,Jens Nitzsche

485

210 Analytical Investigation Of Supersonic Panel

Flutter Under Thermal Environment With

Arbitrary Flow Direction

Avinash R, Deepa N ,

Somenath Mukherjee

489

xxiii

Page 13: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

211 Response Of Multilayered Stiffened Plates

With A Refined C° Higher-Order Shear

Deformation Theory

Bhar A, Phoenix S. S.,

Satsangi S. K.

492

212 Seismic Behaviour Of Soft Storey, Its

Improving Remidies

MahavirVanna,

Mohammad Zuhair

Mohammad Zubair

495

214 Effects Of Twin-Bladed Deflector On Flow

Through S-Duct Diffuser

Akshoy Ranjan Paul, K.

Kalyanb, Navanshu

Tripathi ,B. Majumdar

498

215 Simulation Of Surface Pitting/Peeling Due ToContact Fatigue Loading On Porous Steels

N.Govindarajan,R.Gnanamoorthy

501

216 Damage Prediction In Steel Using Continuum

Damage Mechanics

Shrihari Upadhyaya 503

217 ANew Cohesive Law To Simulate The

Fracture Of Tensile Tests

R. Manivasagam, A.

Banerjee

506

218 Assimilating Life Estimation Techniques In

The Cae Based Design Process Of TypicalCivil Aircraft Components

P. Ravindranadha Reddy,D.V.T.G. Pavan Kumar,

509

219 Crack Detection In A Smart Beam Using Its

Vibrational ResponseS. C. Jain;', Bhanu K

Mishrab ,HimanshuKumarc

512

220 Active Vibration Control Of A Beam Using Pzt

Ceramics Patches

J.*R. Mevada, S. C. Jain,

B.K.Mishra

515

221 Tangential Contact Stresses OfA Str,ed Cable D. Gopinath, B. K.

Gnanavel, N. S.

Parthasarathy

518

222 Effects Of Wake Structure On A SeparatingBoudary Layer Along A Low-Pressure Turbine

Blade

S. Sarkar 521

223 Effect Of Friction On Mixed Contact In A

Twisted Wire Cable

B. K. Gnanavel, D.

Gopinath, N. S.

Parthasarathy

524

224 Inverse Micromechanics For The Prediction Of

Thermo- Mechanical Properties Of

3DOrthotropic Composites

A. S. Junankar, R. V.

Kulkarni, Y. M. Desai,N. K. Naik

526

227 Relative Assesment Of Different Turbulence

Models In Prediction Of Airfoil CharacteristicsFor A Wide Range Of Angle Of Attack

D. S. Kulkarni, S. Sarkar,Sekhar Majumdar

529

228 Influence Of Soil Structure Intreaction On

Dynamic Response Of BridgesA.S.Jalgaonkar&.

R.N.Dubey

532

229 CFD Simulation Of Flow Over Onera M6 Wing Vaibhav B. Munde, N. V.

Deshpande, S.B.

Thombre

535

xxiv

Page 14: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

230 CFD Simulation Of Hydrogen Combustion Samir S. Dhembare,Dinesh D. Adgulkar, N.

V.Deshpande, S.B.Thombre

538

231 Reverse Slip In Remote Stress Dominated

Cylindrical ContactsN. Hamza, H. Murthy 541

232 Ptfe Based Composite For Journal BearingApplications

V.Jayaraj, K.Srinivasan 544

233 A Micromechanical Model For Ferroelectric

Single Crystal Incorporating Friction Effects

K Jayabal, A

Arockiarajan, S M

Sivakumar

546

235 Optimal Design Of Backbone Topology For A

Communication Network Layout Using Genetic

Algorithms

Rajesh Mishra,S K

Chaturvedi

549

236 A Multibody Dynamic Model OfA FlexiblePiano Action Mechanism Impacting A FlexibleString

Chandrika P.

Vyasarayani, StephenBirkett, John Mcphee

553

240 Modal Based Delamination Detection In

Honeycomb S,wich Structures

K.R Pradeep, B

Nageswara Rao, S.M

Sivakumar, K.

Balasubramanium

557

241 Dynamic Scheduling In Multi-ProductEnvironment

Hemant Sharma,P. K.

Jain

560

245 Flexural Analysis Of Thick Isotropic Plate

Using A New Shear Deformation TheoryYuwaraj M. Ghugal,Eshwar G. Pawar

563

246 Vibration Control Of Honeycomb S,wichBeams Conventional, Smart Approaches

S.Venkita Rajagopal,Y,V.Ksadhasiva Rao, S

Narayanan, AK Rath

566

250 Signal Processing, Wavelet Analysis OfStructural Response Due To Soft Body (Bird)Impact On Aircraft Structures

Karthikeyan K, Satish

Chandra

569

254 Effect Of Tip Clearance On The PerformanceOf Swept, Unswept Axial Flow CompressorRotors

Ramakrishna P. V.,Govardhan M

572

255 Identification Of Two Cracks In A Rotor-

Bearing SystemRamesh. B. Thimmaraya,A.S. Sekhar

575

256 Shape Otimization Of 3-D Curved,Twisted

BeamS.K. Singh ,

C.S.

Upadhyay

578

262 Effect Of Pasternak Foundation, Varying In-

Plane Stresses On Vibration OfOrthotropicRectangular Plates By Dq Method

Roshan Lai, Dhanpati,Yajuvindra

581

XXV

Page 15: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

269 Study Of Materia] Damage Using Mesh-

Independent Nonlocal Damage Models

M.K. Samal,

M. Seidenfuss, E. Roos,

B.K. Dutta,

H.S. Kushwaha

584

270 Three Dimensional Store SeparationTrajectory Prediction

Rakesh Kumar, A. K.

Kasyap, A. Lurdhraj

587

271 Effect Of Struts On Seismic Performance Of

Open Ground Storey Frame Buildings

Gaurav Vijay 590

272 Reactor Channel Disassembly Criterion For

Indian Phwr (220 Mwe)

Ravi. K, Ritu.J.Singh,,

Gupta, S.K.

591

281 Relations Among Axisymmetric Solutions Of

Annular Isotropic Plates With Linearly VaryingThickness For Levinson

, Kirchhoff Theories

Ashis Mallick 593

299 Nonlinear Dynamics Of A Cantilevered

Column Subjected To A NonconservativeRocket Thrust: A Numerical Simulation Study

Mikael A. Langthjem ,

Yoshihiko Sugiyama

596

300 Bulls Eye -A Precisionized Pac Missile

SystemRArun 599

301 Flutter Analysis Of Functionally GradedMaterial Panels Subjected To DifferentThermal Conditions In Supersonic Flow

S.A.Fazelzadeh.

K.Jafarpur, M.H.

Eslampanah

601

305 Agent Based Simulation With Rule-Based

ReasoningPuja Gupta,Michael S. Anderson

604

310

Static,Free Vibration Analysis Of Hybrid

Angle-Ply Plates With Segmented Piezoelectric

Actuators,Sensors Using An Efficient

Quadrilateral ElementWith Electric Node

Kulkarni S. D.,

Kapuria S.

606

311 Effect Of Velocity ,Soil Modulus On Pavement

ResponseV. A. Patil, V. A. Sawant 609

316 Theoretical Estimation Of Suction Rate Due To

High Velocity JetDipti Prasad Mishra,Sukanta K. Dash

611

317 Large Amplitude Vibrations Of Laminated

Composite Shells With Initial Geometric

Imperefection

Namita Nanda,J. N.

Bandyopadhyay

614

319 Numerical, Digital Photoelastic Assessment Of

Bimaterial Interfaces In Electronic Packages

Benolina Neethi Simon,

K. Ramesh

616

320 Displacement Methods For Evaluation Of

Stress Intensity Factors For Bi-MaterialInterfacial

Crack Problems

R. Raghu Rajan,B.N.Rao, K. Ramesh

618

321 Design, Fabrication, Experimental,Mathematical Characterization Of

Magnetorheological (Mr) Damper For

Vehicular Applications

Prabakar R, S., SujathaC, Narayanan S

621

xxvi

Page 16: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

322 Flutter Instability Analysis Of Plate With

Damage Subjected To Follower Forces

L. Ravi Kumar. P. K.

Datta, D.L. Prabhakara,,

G. Saravanakumar

624

323 Vibration Based Study Of Concrete Beams In

Damaged, Repaired StatesRajesh Edala. S.

Talukdar, A. Borsaikia

627

324 A Numerical Study For Point SupportedFerrocement Plates On Free Vibration

Response

A. Ahmed,M. Arif.

K. Moin

630

325 Experiemental Evaluation Of Mode I Stress

Intensity Factors

S. Swamy ,M.V.

Srikanth, B. Kaushik,

K.S.R.K. Murthy.P.S. Robi

633

326 Modeling ,Simulation Of A Salt Gradient Solar

PondRaghavendra R. D.

,

Jilani G.

635

327 Modeling ,Simulation Of Nuclear Fuel Rod

Cooled By A Surrounding Fluid Medium

Labeeb A. B., Shameem

U., Jilani G.

638

328 Lqg Based Vibration Control Of Curved Smart

Frp Composite Structures

Tarapada Roy .

Debabrata

Chakraborty

641

329 Free Vibration Of Bimodulus Laminated

Angle-Ply Cylindrical Panels

Khan KalloL Patel B. P.,Nath Y.

644

330 Dynamic Analysis Of A Single Link

Manipulator With Offset Payload Subjected ToTwo Frequency Parametric Excitations

B. Pratiher, B. Sankar,

C. S.Gnanamurugan. G.

K.George,S. Kasbekar,

S.K. Dwivedy

647

331 Modelling ,Simulation Of Flexible

Aircraft DynamicsNiranjan K Sura, ShyamChetty

650

332 Modelling , Analysis Of Gust Response OfFlexible Aircraft With Various Model

Approximations

Niranjan K Sura,

Suryanarayan S

653

333 Modelling Of Piezoelectric Composites To Be

Actuated In Extension,Shear Actuation Modes

Dwarakanathan D, V

Venkata Subba Rao,S

Raja

656

334 A Logical Approach To Overcome The End

Cell Closure Problem Of 15-Cell Ram Air

Parachute

Swadesh Kumar, VipinKumar, S.P.Singh

659

335 Dynamic Chracterisation Of Liquid TankagesBy Elastic Analogy Method

R. Marimuthir

Mohammed Ishaquddin,S Balakiishnan

662

336 Dynamic Instability Of Functionally Graded

Cylindrical Panels

S. Pradyumna, J. N.

Bandyopadhyay

665

xxvii

Page 17: 27-29, by Engineering Technology,PROCEEDINGS ICTACEM2007 FOURTH INTERNATIONALCONFERENCE ON THEORETICAL,APPLIED,COMPUTATIONALAND EXPERIMENTALMECHANICS DECEMBER27-29,2007 Edited by Prof.

337 Influence Of Membrane Force On The Elastic-

Plastic Response Of Clamped Beams SubjectedTo Low Velocity Impact

Rajendrakumar Harsoor,

L.S. Ramachandra

668

338 Buckling, Postbuckling Behaviour Of Cross-

Ply Composite Plate Subjected To Non-

Uniform Inplane Loads.

Sarat Kumar Panda,L. S.

Ramachandra

671

339 Statistical Health Monitoring Of Structure

Using Noisy Dynamic Responses

Debasish

Bandyopadhyay, S. K.

Bhattacharyya

674

340 Shear Performance Of Rc T-Beams

Strengthened With Externally Bonded GfrpComposites

K. C. Panda, S. K.

Bhattacharyya,.S. K. Barai

677

xxviii