22 System - Introduction
Transcript of 22 System - Introduction
©22system 22 System by BOCCI. All rights reserved. Any inquiries should be directed to: [email protected] 22system.com
22.3.6Keypad control
22.3.5Cable F connector
22.3.10USB-A
22.3.2Single pole on/off
22.3.7Outlet - 15A
22.3.8Outlet - 20A
22.3.9Data RJ45 CAT6A
22.3.12HDMI
22.3.3Telephone
The 22 System is a minimal suite of flush-mounted electrical and data components that can be mudded into drywall or set into a variety of rigid finish materials. Trimless and flush mounted, the 22 propels a necessity to a luxury.
A marriage of technology and design, the 22 operates in conjunction with standard junction boxes with kits suitable for installation into any material.
Electrical accessories can now match the care applied elsewhere in the design/build process, a solution to minimize visual noise and create a cohesive experience right down to the details.
The 22 offers a range of components: from tamper resistant outlets to data and communication components, as well as single pole and momentary switches for home automation systems — all UL approved.
22 System - Introduction
Componentsscale 1:1
©22system 22 System by BOCCI. All rights reserved. Any inquiries should be directed to: [email protected] 22system.com
ColoursTo integrate with a variety of finishes, the 22 System components are available in three colours: white, black and almond.
Custom colours and finish options are also available for larger orders, please contact us to discuss your bespoke request
Drywall Only Mounting PlatesDesigned for drywall only applications, these mounting plates mud-in directly over drywall with a skim coat of plaster feathered outwards from the mounting plate. Available in three configurations: single, double linear and double diagonal.
Alternate Material Mounting PlatesThe alternate mounting plate is designed to be used with rigid surfaces such as stone, millwork, glass, tile, etc. and will accommodate a range of finish material thicknesses. Refer to our “Barrel Depth Selection Guide” (hyperlink) to specify the appropriate component depth for your installation. Available in three configurations: single, double linear and double diagonal.
Installation Tool Required for all 22 System installations. white
RAL 9016blackRAL 9017
almondRAL 1013
131 (5”)
94 (3.7”)
117 (4.6”)
126 (4.9”)
126 (4.96”)
117 (4.6”)
131 (5”)
131 (5”)
131 (5”)
94 (3.7”) 140 (5.5”) 140 (5.5”)
single22.2.1
double linear22.2.2
double diagonal22.2.3
single22.2.5
double linear22.2.4
double diagonal22.2.6
22 System - Introduction