FALLING WEIGHT DEFLECTOMETER BOWL PARAMETERS AS ANALYSIS TOOL FOR PAVEMENT STRUCTURAL EVALUATIONS
2021 Catalog Kendalls - Pavement Tool
30
P AVEMENT T OOL M ANUFACTURING, I NC. Manufactured with pride in the U.S.A. Visit our website at www.pavementtool.com Phone: 1-800-345-7969 Fax: 903-734-7531 E-mail: [email protected] Catalog 30 Years of Quality service Over
Transcript of 2021 Catalog Kendalls - Pavement Tool
PAVEMENT TOOL
MANUFACTURING, INC.
Manufactured with pride in the U.S.A.
Visit our website at www.pavementtool.com
Phone: 1-800-345-7969 Fax: 903-734-7531 E-mail: [email protected] Catalog
30 Years of Quality service Over
Pour Pot- Hand Held 1
Pour Pot on Wheels 1
Banding Machine 1
Crack Squeegees, “V” Style 2
Crack Squeegees, “U” Style 2
Crack Squeegees, Heavy Duty, “V”&”U” 3
Crack Hoe 3
Foam Bedding Applicator 3
Asphalt Hand Tampers 4
Pavement Scrapers 4
Asphalt Lute/Rakes 5
Asphalt Lute/Screed 6
Steel Asphalt Rake 4
AS-Series Squeegees 7
MS-Series Squeegees 8
AS & MS Squeegee Replacement Parts 9
Parking Lot Squeegees 8
Brushcoaters 10
Tool Contents
Poly Street Broom 10
Wire Street Broom 10
Oil Spot Broom 10
Aluminum Handles 11
Aluminum Handle Assemblies, for brooms & brushes
11
Hardwood Handles & Brace Kits 11
Parking Lot Protractor 12
Asphalt Tools
Sealcoating Tools
Street Brooms
Handles & Handle Kits
Miscellaneous Tools
Replacement Parts
Barricade Tapes 12
Brace Kits 14
Mounting Kits 14
Hardware Kits 14
Handles 14
Aluminum Handle Conversion Kit 14
Stencil Contents
Stencil Kits 16
Handicap Symbols 16
Arrows Kits 16
Railroad 17
Pedestrian/Crosswalk Stencils 17
Symbol & Kits
Environmental Health Stencils
Stencil Information 15
Pavement Tool Plastic Stencil Material -Plastic Sheets
Recycling Stencils 17
18
Floor Warning Stencils 18
Cars - Bikes - Miscellaneous Stencils 18
Athletic Stencils
Wording Stencils, Number & Alphabet Kits & Individual Characters
2” 19 18” 20
3” 19 24” 21
4” 19 36” 22
6” 19 42” 22
8” 19 48” 23
10” 19 72” 23
12” 20 96” 23
Description PageDescription Page
24-27
POUR POTS—HAND HELD
2.6 gallon capacity
7/8” ball -to-taper seat valve
Nozzle reduced to 3/8” NPT
Product #
CP-3
Description
POUR POT WITH LEGS
2.6 gallon capacity
7/8” ball -to-taper seat valve
Nozzle reduced to 3/8” NPT
Product #
CP-3A
Description
POUR POT WITHOUT LEGS
Pour Pot on Wheels
2.6 gallon capacity
7/8” ball -to-taper seat valve
Nozzle reduced to 3/8” NPT
2 1/2” diameter silicone squeegee
6” diameter steel disc wheels
Product #
CP-3W
Description
Replacement Parts
1
Product # CP-SS
1/4” thick x 1-14” tall x 2 1/2” I.D. replacement blade
Description
Silicone Squeegee Squeegee Nozzle Kit
(1) 2 1/2” diameter steel sleeve with a 3/8” NPT adapter
(1) 2 1/2” I.D. silicone squeegee
(1) hose clamp
Product # CP-SN3
Wheel Set (2) 6” diameter steel disk wheels
CP-W6-3 Axel Set (1) 13” axle
(2) hitch pins
(4) 1/2” washers
CP-AK-3
Description
BANDING MACHINE
4 gallon capacity 3” wide x 1/8” adjustable screed 6” diameter steel disc wheel
Product # CP-4D
Description
Replacement Parts
Product # CP-W6-4
Description
(2) 6” diameter steel disk wheels with 1/2” I.D. x 2” hub
Wheel Set Axle Set (1) 11 1/2” axle
(4) 1/2” washers
(2) hitch pins
Description Product # CP-AK-4
CP-SP (1) 1/4” x 2” x 3” wide steel plate
Screed Plate
CRACK SQUEEGEES
Crack squeegee, 180º Gum rubber
Product # RV-GUM
Description
“V” Style, Crack Squeegee
REVERSIBLE, push/pull style “V” shaped with a 7” throat Uses CSRH-4, 4’ ferruled wood handle
Crack squeegee, 220º Buna rubber HTRV -BUNA
Crack squeegee, 450º Silicone rubber HTRV -SIL
Replacement Parts
Product # RV-R
180°
1/4” x 2” x 12”
Tan
Description Gum
replacement blade
Product # HTRV -BK
220°
1/4” x 2” x 12”
Black
Description Buna
replacement blade
HTRV -RD 450°
1/4” x 2” x 12”
Red
Silicone replacement
blade
2
Crack squeegee, 180º Neoprene rubber
Product # US-NEO
Description
“U” Style, Crack Squeegee
REVERSIBLE, push/pull style “U” shaped with a 3” throat Uses CSRH-4, 4’ ferruled wood handle
Crack squeegee, 450º Silicone rubber US-SIL
Replacement Parts
Product # US-R
1/4” x 2” x 18”
180°
Description Neoprene
replacement blade
Silicone replacement
blade 1/4” x 2” x 18”
450°
Description Product # US-RD
Handle 4 ft., fits both “V”
& “U” squeegees CSRH-4
Handle 4 ft., fits both “V”
& “U” squeegees CSRH-4
“V” style Crack squeegee, 220° Buna rubber
Product # HDRV-BUNA
Description
REVERSIBLE, push/pull style
“U” style Crack squeegee, 220° Buna rubber HDUS-BUNA
Replacement Parts
Product # CSAH-6
Mounts both style crack squeegees heads to all AL-6H, 7H, or 9H
Description
Mounting Kit Buna “V”
V Style replacement blade
1/4” x 3” x 12”
220°
Product # HDRV-BK
Buna “U” U Style replacement
blade
1/4” x3” x 18”
220°
HDUS-BK
Heavy Duty
6 ft. Aluminum Handle
1 1/4” O.D.,
Powder coated yellow AL-6H
3
“V” OR “U” STYLE, CRACK SQUEEGEES
Description
Product # CH-4
Heavy Duty
CRACK HOE
FOAM BEDDING APPLICATOR
Product # BMA-4
1 1/4” x 4” diameter polyethylene disc wheel
1/2” deep flexible disc pushing under surface
42” aluminum handle
Description
V-Shape Routing Tool
4’ ferruled hoe handle
“V” style Crack squeegee, 450° Silicone rubber HDRV-SIL 1/4” x 2” x 12”
All Steel Construction
8” square x 1/4” Steel Plate Base, 13 lbs.
1” x 50” Black Iron Pipe handle
Description
Product #
AT-5208S
PAVEMENT SCRAPERS
10” Stainless Steel blade with knife edge 1 1/8” x 5 ft. steel tube handle
Product # ASC-510
Description
14” flexible Spring Steel blade 1 1/8” x 5 ft. steel tube handle
Description Product # ASC-514
ASPHALT HAND TAMPERS
4
STEEL ASPHALT RAKE 14 teeth x 16” wide design with a 78” overall length with a long hardwood Ferruled Handle make this tool ideal for those tough jobs, particularly working under infrared
pavement heating machines
14 teeth 60” Hardwood handle
Description Product # HAR-14
5
ASPHALT LUTE/RAKES Extruded Aluminum Design
NT Lute/Rake with No Teeth
30” Lute/Rake, 6 ft handle, AL-Brac brace kit
Description Product # AL-630
36” Lute/Rake, 6 ft handle, AL-Brac brace kit AL-636
42” Lute/Rake, 6 ft handle, AL-Brac brace kit AL-642
48” Lute/Rake, 6 ft handle, AL-Brac brace kit AL-648
30” Lute/Rake, 7 ft handle, AL-Brac brace kit AL-730
36” Lute/Rake, 7 ft handle, AL-Brac brace kit
AL-742 42” Lute/Rake, 7 ft handle, AL-Brac brace kit
AL-736
AL-748 48” Lute/Rake, 7 ft handle, AL-Brac brace kit
2PC Bracket Design using AL- BRAK bracket kit
30” Lute/Rake, 6 ft handle, AL-Brak, 2 pc bracket kit
Description Product # AL-630B
36” Lute/Rake, 6 ft handle, AL-Brak, 2 pc bracket kit AL-636B
42” Lute/Rake, 6 ft handle, AL-Brak, 2 pc bracket kit AL-642B
48” Lute/Rake, 6 ft handle, AL-Brak, 2 pc bracket kit AL-648B
30” Lute/Rake, 7 ft handle, AL-Brak, 2 pc bracket kit AL-730B
36” Lute/Rake, 7 ft handle, AL-Brak, 2 pc bracket kit
AL-742B 42” Lute/Rake, 7 ft handle, AL-Brak, 2 pc bracket kit
AL-736B
AL-748B 48” Lute/Rake, 7 ft handle, AL-Brak, 2 pc bracket kit
Big Boy Lute/rakes With 1 3/8” O.D. x 7 ft. handles
Uses AL -BRAK 2 pc. Bracket kit ONLY
30” Lute/Rake, 7 ft. Big Boy handle, AL - Brak kit
Description Product # BAL-730B
36” Lute/Rake, 7 ft. Big Boy handle, AL - Brak kit BAL-736B
42” Lute/Rake, 7 ft. Big Boy handle, AL - Brak kit BAL-742B
48” Lute/Rake, 7 ft. Big Boy handle, AL - Brak kit BAL-748B
Replacement parts to Asphalt Lute/Rakes on page 6
Without Teeth Product #
AL-630NT
AL-636NT
AL-642NT
AL-648NT
AL-730NT
AL-742NT
AL-736NT
AL-748NT
Without Teeth Product #
AL-630BNT
AL-636BNT
AL-642BNT
AL-648BNT
AL-730BNT
AL-742BNT
AL-736BNT
AL-748BNT
Without TeethProduct #
BAL-730BNT
BAL-736BNT
BAL-742BNT
BAL-748BNT
4PC Brace ket Design using AL-BRAC kit
AL-6H 1 1/4” O.D.,
Powder coated yellow
6 ft. Aluminum Handle
7 ft. Aluminum Handle
1 1/4” O.D.,
Powder coated yellow AL-7H
7 ft. Big Boy Handle
1 3/8” O.D.,
Powder coated yellow BAL-7H
AL-BRAC Braces, clamps, inserts, & hardware
Brace Kit
Bracket Kit
2-Brackets & hardware
AL-BRAK
Replacement Parts
Aluminum Handles, Brace & Bracket Kits, Extruded Lute/Rake Blades
ASPHALT LUTE/SCREED
Extruded Aluminum Blade with Wood Handle
30” 6 ft. hardwood handle
Description Product # WL-630
3 1/2” X 1/2” angle
Description Product # WL-B30
Replacement Parts
Product # WL-6H
30” Lute/Screed Blade
6 ft. Handle 1 1/4” O.D.,
Hardwood Handle
Description
WL-HWD Mounting Brackets Hardware Kit
WL-BRAK
36” Lute/Rake Blade
with teeth AL-B36
42” Lute/Rake Blade
with teeth AL-B42
48” Lute/Rake Blade
with teeth AL-B48
30” Lute/Rake Blade
Without teeth
Product # AL-B30NT
36” Lute/Rake Blade
Without teeth
AL-B36NT
42” Lute/Rake Blade
Without teeth AL-B42NT
48” Lute/Rake Blade
Without teeth
AL-B48NT
30” Lute/Rake Blade
with teeth Product # AL-B30
Description Description
6
Nuts & Bolts
SEALCOATING APPLICATORS AS-Series, Extruded Aluminum & Rubber
24” Squeegee, 6 ft handle, AL - Brac brace kit
Description Product # AS -624
30” Squeegee, 6 ft handle, AL - Brac brace kit AS -630
36” Squeegee, 6 ft handle, AL - Brac brace kit AS -636
48” Squeegee, 6 ft handle, AL - Brac brace kit AS -648
60” Squeegee, 6 ft handle, AL - Brac brace kit AS -660
72” Squeegee, 6 ft handle, AL - Brac brace kit
AS -724 24” Squeegee, 7 ft handle, AL - Brac brace kit
AS -672
AS -730 30” Squeegee, 7 ft handle, AL - Brac brace kit
AS -736 36” Squeegee, 7 ft handle, AL - Brac brace kit
AS -748 48” Squeegee, 7 ft handle, AL - Brac brace kit
AS -760 60” Squeegee, 7 ft handle, AL - Brac brace kit
AS -772 72” Squeegee, 7 ft handle, AL - Brac brace kit
2 PC Bracket Design using AL-BRAK
24” Squeegee, 6 ft handle,
Description Product # AS-624B
30” Squeegee, 6 ft handle, AS-630B
36” Squeegee, 6 ft handle, AS-636B
AS-648B
60” Squeegee, 6 ft handle, AS-660B
72” Squeegee, 6 ft handle,
AS-724B 24” Squeegee, 7 ft handle,
AS-672B
AS-730B 30” Squeegee, 7 ft handle,
AS-736B 36” Squeegee, 7 ft handle,
AS-748B 48” Squeegee, 7 ft handle,
AS-760B 60” Squeegee, 7 ft handle,
AS-772B 72” Squeegee, 7 ft handle,
Big Boy squeegees With 1 3/8” O.D. x 7 ft. handles
Uses AL -BRAK 2 pc. Bracket kit ONLY
24” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit
Description Product # BAS-724B
30” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BAS-730B
36” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BAS-736B
48” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BAS-748B
30” Squeegee, 6 ft handle,
AL-Brak, 2PC bracket kit
48” Squeegee, 6 ft handle,
60” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BAS-760B
72” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BAS-772B
AS -Series Replacement Parts on page 10 7
AL-Brak, 2PC bracket kit
AL-Brak, 2PC bracket kit
AL-Brak, 2PC bracket kit
AL-Brak, 2PC bracket kit
AL-Brak, 2PC bracket kit
AL-Brak, 2PC bracket kit
AL-Brak, 2PC bracket kit
AL-Brak, 2PC bracket kit
AL-Brak, 2PC bracket kit
AL-Brak, 2PC bracket kit
4PC Brace ket Design using AL-BRAC kit
AL-Brak, 2PC bracket kit
SEALCOATING APPLICATORS MS-Series, Extruded Aluminum & Rubber
24” Squeegee, 6 ft handle, AL-Brac brace kit
Description Product # MS-624
30” Squeegee, 6 ft handle, MS-630
36” Squeegee, 6 ft handle, MS-636
48” Squeegee, 6 ft handle, MS-648
60” Squeegee, 6 ft handle, MS-660
72” Squeegee, 6 ft handle,
MS-724 24” Squeegee, 7 ft handle,
MS-672
MS-730 30” Squeegee, 7 ft handle,
MS-736 36” Squeegee, 7 ft handle,
MS-748 48” Squeegee, 7 ft handle,
MS-760 60” Squeegee, 7 ft handle,
MS-772 72” Squeegee, 7 ft handle,
2 PC Bracket Design using AL-BRAK
24” Squeegee, 6 ft handle, AL -Brak, 2 PC bracket kit
Description Product # MS-624B
30” Squeegee, 6 ft handle, AL -Brak, 2 PC bracket kit MS-630B
36” Squeegee, 6 ft handle, AL -Brak, 2 PC bracket kit MS-636B
48” Squeegee, 6 ft handle, AL -Brak, 2 PC bracket kit MS-648B
60” Squeegee, 6 ft handle, AL -Brak, 2 PC bracket kit MS-660B
72” Squeegee, 6 ft handle, AL -Brak, 2 PC bracket kit
MS-724B 24” Squeegee, 7 ft handle, AL -Brak, 2 PC bracket kit
MS-672B
MS-730B 30” Squeegee, 7 ft handle, AL -Brak, 2 PC bracket kit
MS-736B 36” Squeegee, 7 ft handle, AL -Brak, 2 PC bracket kit
MS-748B 48” Squeegee, 7 ft handle, AL -Brak, 2 PC bracket kit
MS-760B 60” Squeegee, 7 ft handle, AL -Brak, 2 PC bracket kit
MS-772B 72” Squeegee, 7 ft handle, AL -Brak, 2 PC bracket kit
Big Boy Squeegees With 1 3/8” O.D. x 7 ft. handles
*Uses AL-BRAK 2 PC. Bracket kit ONLY
24” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit
Description Product # BMS-724B
30” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BMS-730B
36” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BMS-736B
48” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BMS-748B
60” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BMS-760B
72” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BMS-772B
**MS -Series Replacement Parts on page 10** 8
AL-Brac brace kit
AL-Brac brace kit
AL-Brac brace kit
AL-Brac brace kit
AL-Brac brace kit
AL-Brac brace kit
AL-Brac brace kit
AL-Brac brace kit
AL-Brac brace kit
AL-Brac brace kit
AL-Brac brace kit
4PC Brace ket Design using AL-BRAC kit
Parking Lot Squeegees Uses MS -style, 3” x 1/4” blades with holes
24” Parking Lot Squeegee, handle not included
Description Product #
PL-24
30” Parking Lot Squeegee, handle not included PL-30
36” Parking Lot Squeegee, handle not included PL-36
Replacement Parts Product #
PL-R24 24” Neoprene Replacement Blade
30” Neoprene Replacement Blade PL-R30 36” Neoprene Replacement Blade PL-R36
Handle 6 ft. x 1 1/8” Hardwood, tapered end WB-6
Product #
AL-6H
1 1/4” O.D.,
Powder coated yellow
Description
6 ft. Aluminum
Handle
7 ft. Aluminum
Handle
1 1/4” O.D.,
Powder coated yellow
Description
Product #
AL-7H
9 ft. Aluminum
Handle
1 1/4” O.D.,
Powder coated yellow
AL-9H
7 ft. Big Boy
Handle
1 3/8” O.D.,
Powder coated yellow
BAL-7H
AL-BRAC
Braces, clamps,
inserts, & hardware
Brace Kit
Bracket
Kit
2-Brackets
& hardware
AL-BRAK
Big Boy
Bracket Kit
2-Brackets
& hardware
AL -BRAK
24” Neoprene Squeegee Blade
MS-R24
30” Neoprene Squeegee Blade
MS-R30
36” Neoprene Squeegee Blade
MS-R36
48” Neoprene Squeegee Blade
MS-R48
60” Neoprene Squeegee Blade
MS-R60
72” Neoprene Squeegee Blade
MS-R72
Replacement Parts
Aluminum Handles, Brace & Bracket Kits,
MS-Series Extruded Neoprene Replacement Blades
Product #
AL-6H 1 1/4” O.D.,
Powder coated yellow
Description 6 ft. Aluminum
Handle 7 ft. Aluminum
Handle
1 1/4” O.D.,
Powder coated yellow
Description Product #
AL-7H
7 ft. Big Boy
Handle
1 3/8” O.D.,
Powder coated yellow
BAL-7H AL-BRAC
Braces, clamps,
inserts, & hardware
Brace Kit
Bracket
Kit
2-Brackets
& hardware AL-BRAK
Big Boy
Bracket Kit
2-Brackets
& hardware
AL -BRAK
24” Neoprene Squeegee Blade
AS-R24P 30” Neoprene Squeegee Blade
AS-R30P
36” Neoprene Squeegee Blade
AS-R36P
48” Neoprene Squeegee Blade
AS- R48P
60” Neoprene Squeegee Blade
AS-R60P
72” Neoprene Squeegee Blade
AS-R72P
Replacement Parts
Aluminum Handles, Brace & Bracket Kits,
AS-Series Extruded Neoprene Replacement Blades
9
SEALCOATING APPLICATORS
Brushcoaters (alternative brush applicators) *2” long Polypropylene fibers (210 degree)
*2” x 1” hardwood block base
18” Brushcoater, handle not included
Description Product # BSB - 18
24” Brushcoater, handle not included BSB - 24
36” Brushcoater, handle not included BSB - 36
Replacement Parts Product # SB-B Brace Kit
Description
Aluminum Handle Assembly BH-6
Handle 6 ft. handle x 15/16”
Hardwood, threaded end
Product # SB-6
Description
Optional, not included
For SB-6 Handle
STREET BROOMS Poly Street Brooms
*5” long polypropylene bristles *16” x 3 1/2” x 1 1/4” hardwood block
16” Poly Street Broom HANDLE NOT INCLUDED
Product # SB -16
Description
Wire Street Brooms *3 3/4” long coated steel bristles
*16” x 3 5/16” x 1 1/8” hardwood block
16” Wire Street Broom HANDLE NOT INCLUDED
Product # WSB-16
Description
Oil Spot Brooms *5” long x 1/16” wide, flat steel bristles
*12 1/4” x 2 1/2” x 1 3/4” hardwood block
12” Oil Spot Broom HANDLE NOT INCLUDED
Product # OSB-12
Description
Product # WB-6
Handle 6 ft. x 1 1/8”
Hardwood, tapered end
PARTS SOLD SEPERATLY
Aluminum Handle Assembly
AH-6 Uses AL-6h handle with AL-BRAK
& 1pc mounting tee
Complete with handle,AL-Brak,1pc mounting base & hardware
10
Handle,AL-Brak and 2pc clamp
HANDLES & HANDLE KITS
Product #
AL-6H 1 1/4” O.D.
.062 Wall thickness
Description 6 ft. Aluminum
Handle 7 ft. Aluminum
Handle 1 1/4” O.D.,
.062 Wall thickness
Description Product #
AL-7H
7 ft. Big Boy
Handle
1 3/8” O.D.,
.062 Wall thickness
BAL-7H
Aluminum Handles
Powder coated yellow
Aluminum Handles Assemblies
Aluminum Handle
Assembly
Product #
Brushcoaters
Aluminum Handle
Assembly Product #
AH-6
Street Broom
Hardwood Handles & Brace Kits
*Mounts to STREET BROOMS & BRUSHCOATERS
*Uses AL-6H handle with AL- BRAK mounting
*Complete with handle, mounting base, & hardware
*Fits SB, WSB, OSB, BSB, & CS brooms, brushes, and squeegees
Product #
SB-B
Brace Kit
Description
Handle
6 ft. handle x 15/16”
Hardwood, threaded end
Product #
SB-6
Description
sold separately
Handle
6 ft. x 1 1/8”
Hardwood, tapered end
WB-6
Brace Kit
WB-BRAC
Hoe Handle
4 ft.
fits “V” & “U” Squeegee
CSRH-4
11
BH-6
sold separately
Barricade Tape
*High Visibility, yellow opaque poly material
*Scratch-proof and weather resistant
Barricade Tape, Economy, 200 ft. x 3” (2 mil)
Description
Product # BT-210
Barricade Tape, Heavy Duty, 1000 ft. x 3” (3mil)
BT-1000
Barricade Tape, Economy, 1000 ft. x 3” (2mil) BT-1210
12
PARKING LOT PROTRACTOR
*Fast and Accurate Layouts
*Quick and Easy angles ( in increments of 10° )
7’ -
5” open length
Product #
PP-180-4
Description
1)
Open Parking Lot Protractor to desired angle from curb, wall, etc. With finger nut, tighten
protractor in place.
2)
Lay Parking Lot Protractor on the parking lot (at your first stripe mark) with one side against the
curb, etc.
3)
With a piece of chalk, make two marks along the exposed edge of the protractor on the surface to
be striped
4) With a chalk line, pop a line over the two marks giving your desired angle
Instructions for use:
Replacement Parts Brace Kits
Mounting Kits
Hardware Kit
Product # WL-HWD
Description Hardware for WL-BRAK
Used For:
Lute/Screed mounting bracket
WL-BRAK Hardware sold separately Lute/Screed
Product # CSAH-6
Description Mounts to both style Crack
Squeegees
Used For: Heavy Duty “V” & “U” Squeegees
Product # AL-BRAC
WB-BRAC
SB-B
AL-BRAK
Description Braces, clamps, inserts, &
hardware
Used For: Lute/Rake AS Series Squeegee MS Series Squeegees
Braces, clamps, & hardware
Optional for WB- 6 handle used for * PSB,WSB, & OSB
* Parking Lot, Car Stop, & Driveway Squeegees
Braces, clamps, & hardware Optional for SB-6 handle used
for * Brushcoaters
2 - Brackets & hardware
Lute/Rakes AS Series Squeegees MS Series Squeegees
13
Handles
Product #
AL-6H
AL-7H
Description
6’ Aluminum Handle 1 1/4” dia. X .062 wall
thickness Powder coated yellow
Used For:
AS-Series Squeegees MS-Series Squeegees Lute/Rakes Heavy Duty “V” or “U”
* Brushcoaters
WB-6 6ft x 1 1/8” Hardwood tapered end
PSB, WSB, & OSB Parking Lot, Car Stop, &
Driveway Squeegees
SB-6 6ft x 15/16” Hardwood, threaded end
Brushcoaters
BAL-7H AS-Series Squeegees MS-Series Squeegees Lute/Rakes
7’ Aluminum Handle 1 3/8” dia. X .062
wall thickness
CSRH-4 4ft handle with ferrule “V” Style Squeegee “U” Style Squeegee
WL-6H 6ft x 1 1/4 O.D. hardwood
Lute/Screed
7’ Aluminum Handle 1 1/4” dia. X .062 wall
thickness Powder coated yellow
AS-Series Squeegees MS-Series Squeegees Lute/Rakes
Aluminum Handle Conversion Kit
Product # AH-6
BH-6
Description
Handle (AL-6H) with AL-BRAK
and
1pc mounting
Used For:
PSB, WSB, & OSB
base, & hardware Street brooms
Handle (AL-6H) with AL-BRAK
and
2 pc mounting
Brushcoaters
Replacement Parts
14
SB-6MT Metal, threaded end
base, & hardware
STENCIL INFORMATION
There are many grades of plastic in our industry. Our stock stencils are produced from the best grade of polyethylene plastic you can use for a stencil. Other products not manufactured with this superior grade of polyethylene plastic will not give you the same lasting service as ours. Polyethylene plastic is made for easy maintenance. The non-porous, slick surface allows the dried paint build-up to simply flake off after drying when properly taken care of. Stencils are best stored flat and in moderate temperature when not in use.
*All of our stencils are designed around D.O.T. specifications whenever applicable. We can comply with variations in Municipal, State, or Private specifications when provided with details. We also have the ability to produce stencils in:
Aluminum .063
*We have more variety of stencils that are not shown in the catalog. To find out more call us!
S-0001 D/M 4’ X 8’ LDPE Plastic Sheet
S-0002 D/M 4’ X 10’ LDPE Plastic Sheet
PAVEMENT TOOL PLASTIC STENCIL MATERIAL
Our 2 types of plastic are:
15
D/M MAXILAST:
1/8” (.125” ) thickDUROLAST: 1/16” (.060” ) thick
Call for quotes!!
SYMBOLS & KITS S-1010 D/M Standard Stencil Kit
Includes one each of the following - 21 1/2” Handicap Symbol - 4” “No Parking” - 42” Standard Arrow Kit, 2 pc. - 4” “Fire Lane” - 12” “No Parking” - 4” “Visitors” - 12” “Fire Lane” - 4” “Reserved” - 12” Standard Number Kit, 12 pc.
S-1020 D/M Large Stencil Kit Includes one each of the following
- 39” Handicap Symbol - 4” “No Parking” - 90” Large Arrow Kit, 3 pc. - 4” “Fire Lane” - 24” “No Parking” - 4” “Visitors” - 24” “Fire Lane” - 4” “Reserved” - 12” Standard Number Kit, 12 pc.
S-3015 D/M Handicap Symbol
15 1/2” Tall x 13 3/4” Wide To D.O.T. specs
S-3030 D/M Handicap D.O.T. KIT, 2 PC.
(1) 30” Handicap Symbol with a outside Border of 42” sq. x 3” wide bar
(1) Blue background stencil
S-3021 D/M Handicap Symbol
21 1/2” Tall x 19” Wide To D.O.T. specs
S-3039 D/M Handicap Symbol
39” Tall x 34” Wide x 4” Bar To D.O.T. specs
S-3048 D/M Handicap Symbol
48” Tall x 43 1/2” Wide x 3” Bar To California D.O.T. specs
S-3148 D/M Handicap Symbol
48” Tall x 41 1/4” Wide x 4” Bar To Texas D.O.T. specs
S-3072 D/M Handicap Symbol 2 PC. 72” Tall x 63” Wide x 5” Bar
To D.O.T. specs
S-4042 D/M Standard Arrow Kit 2 pc.
(1) Straight & (1) Curved
42” O.A.L. 20” Wide Head, 9” Wide Tail
S-4060 D/M Straight Arrow
60” O.A.L. 36” Wide Head 12” Wide Tail
S-4065 D/M Curved Tail 12” Wide Tail Fits S-4060
S-4090 D/M Large Arrow Kit 3 pc.
(1) Head, 42” Tall x 36” Wide
(1) Straight Tail 42” x 12”
(1) Curved Tail 42” x 24”
S-5000 D/M Straight Arrow Kit 2 pc. Highway/ Intersection
10’ O.A.L. to D.O.T. spec.
S-5010 D/M Curved Arrow Kit 2 pc. Highway/ Intersection
8’- 4” O.A.L. to Texas D.O.T. spec. (Details vary per state)
S-5015 D/M Arrow Combo Kit 3 pc. Highway/ Intersection
13’- 4” O.A.L. to Texas D.O.T. spec.(Details vary per state)
42” 60”
12”
42”
16
40”
120”
64”
12”
36”
32”
20” 76”
32”
76” 12”
160”
64”
40”
12” 76”
32”
76”
32”
20”
36”
D/M
MAXILAST: 1/8” (.125” ) thick DUROLAST: 1/16” (.060” ) thick
(Details vary per state)
S-5020 D/M Railroad “R”
78” Tall x 12 1/2” Wide To Texas D.O.T. Specs (Details vary per state)
S-5021 D/M Railroad “X”, 10 pc.
20’ Tall x 8’ Wide “R’s” are not included
S-5035 D/M Pedestrian Crossing Symbol
4’ 6” Tall x 3’ 8” Wide To D.O.T specs
S-5040 D/M Intersection Crosswalk Stop Bar
Your choice in width up to 24” x 7’6” longinside dimensions with a 3” bar on all sides
SYMBOLS & KITS
S-5070 D/M Line Loop Stencil
For double lines, any width and size
S-5060 D/MLine Stencil, 2 pc.
4” wide x 14’ long stripe
with rivets long 15’ x 12” material On
S-5050 D/M Wheel Stop Overspray Kit, 2 pc.
“L” Shaped 8” x 78” I.D.
S-5080 D/M Traffic Cone I.D. Stencil
Fits 18” Cones, 1” character size
S-5082 D/M Traffic Cone I.D. Stencil
Fits 28” Cones, 1” character size
S-5605 D/M Recyclable Logo
2” wording, 16” wide symbol, 20” sq. plastic
78”
12 1/2”
8 ft.
20 ft.
17
FLOOR WARNING STENCILS
S-5502 DStencil Size: 17” x 17”Plastic Size: 24” x 24”
S-5509 DStencil Size: 17” x 17”Plastic Size: 24” x 24”
S-5513 DStencil Size: 17” x 17”Plastic Size: 24” x 24”
S-5511 DStencil Size: 17” x 17”Plastic Size: 24” x 24”
ENVIRONMENTAL HEALTH STENCILS
S-5651 D2” Characters
Plastic Size: 24” sq.
S-5652 D2” Characters
Plastic Size: 24” sq.
S-5653 D2” Characters
Plastic Size: 24” sq.
S-5654 D2” Characters
Plastic Size: 24” sq.
S-5655 D2” Characters
Plastic Size: 30” x 16”
S-5030 D/M
Bicycle Lane Symbol
6’ 6” Tall x 3’ 8” Wide
S-5032 D/M
Bicycle Lane Symbol
5’ 6” Tall x 44” Wide
S-5033 D/M
Bicycle Lane Symbol
9’ 3” Tall x 44” Wide
S-5036 D/M
Motorcycle Symbol
44” Tall x 60” Wide
S-4242 D/M
Electric Car Symbol
42” Tall x 42” Wide
Option: with people 48” x 48” Size: Plastic
20 1/8”
19 3/4”
18 1/8”
18 1/8”
15 5/8”
18 1/8”
15 3/8”
18 1/8”
25 1/2”
10 1
/4”
S-4225 D/M EV Pump Car Chargeing Symbol
42” Tall x 25” Wide
46” x 34” Size: Plastic
2pc stencil
18
S-3924 D/M
Racing Handicap Symbol
39” Tall x 24” Wide
Plastic Size: 33” x 48”
Miscellaneous Stencils
WalMart
McDonalds
Yield Triangle
18” Tall x 12” Wide
WORDING & INDIVIDUAL CHARACTER STENCILS All of our Characters are a standard BLOCK style/font, but we are also capable of producing letters, numbers, or words in over 500 different styles or fonts and in other languages if needed. All Styles and fonts are generated and stored on computer files for futurerecall and production. All wording stencils from 24” to 96” in height are designed around D.O.T. specifications and are designed to beread at a 22 degree angle. Please note these are our stock sizes listed. Anything not listed is considered custom.
NUMBERS AND ALPHABET KITS
Standard Number Kit: Includes 12 pc.; 1 2 3 4 5 6 7 8 9 0 and 2 blanks. Standard Alphabet Kit: Includes 28 pc.; A B C D E F G H I J K L M N O P Q R S T U V W X Y Z and 2 blanks. Mega Kit: Includes 63 pc; AA B C D EEE F G H II J K LL M NN OO P Q RR SSS TT U V W X Y Z 11 22 33 4 5 6 7 8 9 11 22 33 4 5 6 7 8 9 00& # / ( ) - , . and 4 blanks
Wording: 3/8” between letters, 2 1/4” between words Character: 2” T. x 1 1/2” W., 3/8” bar width Plastic: 6” x 2 1/2”
S-7021 D/M 2” Wording (Up to 10 letters) S-8020 D/M 2” Standard Number Kit, 12 pc. S-8025 D/M 2” Standard Alphabet Kit, 28 pc. S-8028 D/M 2” Mega Kit, 63 pc. S-9020 D/M 2” Individual Characters
S-7031 D/M 3” Wording (Up to 10 letters) S-8030 D/M 3” Standard Number Kit, 12 pc. S-8035 D/M 3” Standard Alphabet Kit, 28 pc. S-8038 D/M 3” Mega Kit, 63 pc. S-9030 D/M 3” Individual Characters
S-7041 D/M 4” Wording (Up to 10 letters) S-8040 D/M 4” Standard Number Kit, 12 pc. S-8045 D/M 4” Standard Alphabet Kit, 28 pc. S-8048 D/M 4” Mega Kit, 63 pc. S-9040 D/M 4” Individual Characters
S-7061 D/M 6” Wording (Up to 10 letters) S-8060 D/M 6” Standard Number Kit, 12 pc. S-8065 D/M 6” Standard Alphabet Kit, 28 pc. S-8068 D/M 6” Mega Kit, 63 pc. S-9060 D/M 6” Individual Characters
S-7080 D/M 8” Wording (Up to 5 letters) S-7081 D/M 8” Wording (Up to 10 letters) S-8080 D/M 8” Standard Number Kit, 12 pc. S-8085 D/M 8” Standard Alphabet Kit, 28 pc. S-8088 D/M 8” Mega Kit, 63 pc. S-9080 D/M 8” Individual Characters
Wording : 3/8” between letters, 2 3/4” between words Character: 3” T. x 2” W., 3/8” bar width Plastic : 7” x 3”
Wording: 1/2” between letters, 3 1/4” between words Character: 4” T. x 2 1/4” W., 1/2” bar width Plastic : 8” x 4”
Wording : 7/8” between letters, 5 3/4” between words Character: 6” T. x 4” W., 7/8” bar width Plastic : 10” x 6”
Wording : 1 1/2” between letters, 9” between words Character: 8” T. x 6” W., 1 1/2” bar width Plastic : 12” x 9”
Wording: 1 3/4” between letters, 11” between words Character : 10” T. x 7 1/2” W., 1 3/4” bar width Plastic: 14” x 11”
S-7100 D/M 10” Wording (Up to 5 letters) S-7101 D/M 10” Wording (Up to 10 letters) S-8100 D/M 10” Standard Number Kit, 12 pc. S-8105 D/M 10” Standard Alphabet Kit, 28 pc. S-8108 D/M 10” Mega Kit, 63 pc. S-9100 D/M 10” Individual Characters
2”
3”
4”
6”
8”
10”
19 note
D/M MAXILAST: 1/8” (.125” ) thickDUROLAST: 1/16” (.060” ) thick
Wording: 2” between letters, 13” between words
Plastic : 16” x 12”
S-7120 D/M 12” Wording (Up to 5 letters) S-7121 D/M 12” Wording (Up to 10 letters) S-8120 D/M 12” Standard Number Kit, 12 pc. S-8125 D/M 12” Standard Alphabet Kit, 28 pc. S-8128 D/M 12” Mega Kit, 63 pc. S-9120 D/M 12” Individual Characters
12”
18”
Wording : 2” between letters, 13” between words
Plastic : 22” x 12”
S-7180 D/M 18” Wording (Up to 5 letters) S-7181 D/M 18” Wording (Up to 10 letters) S-8180 D/M 18” Standard Number Kit, 12 pc. S-8185 D/M 18” Standard Alphabet Kit, 28 pc. S-9180 D/M 18” Individual Characters
Character: 12” T. x 9” W., 2” Bar Width
Character : 2” Bar Width
20
24” x 9”
Wording : 2” between letters, 13” between words Character : 24” T. x 9” W., 2” Vertical x 3 1/2” Horizontal Bar WidthPlastic : 28” x 12”
S-7240 D/M 24” Wording (Up to 5 letters) S-7241 D/M 24” Wording (Up to 10 letters) S-8240 D/M 24” Standard Number Kit, 12 pc. S-8245 D/M 24” Standard Alphabet Kit, 28 pc. S-9240 D/M 24” Individual Characters
24” x 16” Wide Body
Wording : 4” between letters, 24” between wordsCharacter : 24” T. x 16” W., 4” Vertical x 4” Horizontal Bar WidthPlastic : 28” x 22”
S-7240W D/M 24” Wording (Up to 5 letters) S-7241W D/M 24” Wording (Up to 10 letters) S-8240W D/M 24” Standard Number Kit, 12 pc. S-8245W D/M 24” Standard Alphabet Kit, 28 pc. S-9240W D/M 24” Individual Characters
21
note
D/M MAXILAST: 1/8” (.125” ) thickDUROLAST: 1/16” (.060” ) thick
36”
Wording : 2 1/2” between letters, 14” between words Character : 36” T. x 9” W., 2 1/2” Vertical x 6” Horizontal Bar Width Plastic : 48” x 13”
S- 7360 D/M 36” Wording (Up to 5 letters) S- 7361 D/M 36” Wording (Up to 10 letters) S- 8360 D/M 36” Standard Number Kit, 12 pc. S- 8365 D/M 36” Standard Alphabet Kit, 28 pc. S- 9360 D/M 36” Individual Characters
42”
Wording : 2 1/2” between letters, 17” between wordsCharacter : 42” T. x 12” W., 2 1/2” Vertical x 7 1/2” Horizontal Bar WidthPlastic : 48” x 16”
S-7420W D/M 42” Wording (Up to 5 letters) S-7421W D/M 42” Wording (Up to 10 letters) S-8420W D/M 42” Standard Number Kit, 12 pc. S-8425W D/M 42” Standard Alphabet Kit, 28 pc. S-9420W D/M 42” Individual Characters
22
48”
Character : 48” T. x 12” W., 3” Vertical x 12” Horizontal Bar WidthPlastic : 60” x 18”
S-8480 D/M 48” Standard Number Kit, 12 pc. S-8485 D/M 48” Standard Alphabet Kit, 28 pc. S-9480 D/M 48” Individual Characters
72”
Character: 72” T. x 16” W., 3” Vertical x 12” Horizontal Bar WidthPlastic : 84” x 24”
S-9720 D/M 72” Individual Characters
Character: 96” T. x 16” W., 4” Vertical x 16” Horizontal Bar WidthPlastic : 108” x 24”
S-9960 D/M 96” Individual Characters
96”
23
note
D/M MAXILAST: 1/8” (.125” ) thickDUROLAST: 1/16” (.060” ) thick
ATHLETIC STENCIL KITS
Stencil Kits specially designed for athletic track and field markings, logos, and advertisings
S-6030 D/M Football Field Numbering Kit
8 pc. Roman Style, 3’ T. x 2’ W.
S-6060P D/M Football Field Numbering Kit 8 pc., Roman Style, 6’ T. x 4’ W.
S-6070-18 D/M S-6070-24 D/M Football Field Dash Mark Kits
Marks 4 dashes & 1 inbound line, 5 yards 2 pc Kit with rivets
S-6100 D/M Track Lane Marking Kit
14 pc. Roman Style, 3’ T. x 2’ W. (1,2,3,4,5,6,7,8, Start Line, Hurtle, Exchanges,
& Acceleration Markers)
S-6303 D/M School Lettering
3’ T. x 2’ W. Stamp Stencil Style
S-6310 D School Lettering 10’ T. x 6’ 6” W.
Block Style
S-6312 D School Lettering
12’ T. x 8’ W. Block Style
S-6315 D School Lettering 15’ T. x 10’ W.
Block Style
S-6320 D School Lettering 20’ T. x 14’ 6” W.Gothic Block Style
S-6060 D/M Football Field Numbering Kit 8 pc., Roman Style, 6’ T. x 42” W.
24
S-6200 D/M Helmet Stencil Kit
9 pc., 15’ 6” T. x 19’ x 6” W. Will hold a 9’ T. x 14’ W. logo inside
S-6200P D/M Pro-Style Helmet Stencil Kit
20 pc., 15’ 6” T. x 14’ W. Will hold a 7’ T. x 10’ W. logo inside
S-6202 D/M Helmet Stencil Kit
21 pc., 20’ T. x 25” W. Will hold a 12’ T. x 17’ W. logo inside
18”
24”
ATHLETIC STENCIL KITS
S-6400 D/M Shuffleboard Kit
3 pc. 10’ T. x 6’ W. Built to official National Standards
Court Specifications
S-6420 D/M Hopscotch 11pc Kit 7’ 6” T. x 2’ W.
S-6425 D/M Hopscotch 1 pc Kit 9’ T. x 40” W.
S-6475 D Complete Basketball 13 pc Kit
S-6480 D Basketball Court Circle Kit
7’ T. x 4’ W. Foul Line
25
BUSINESS/HOME IMPROVEMENT AND DECORATION KITS
**Business/Home Improvement & Decorative Stencil Kits are designed to be used with most skid resistant and
concrete stain products. They will produce beautiful and lasting imitation Brick, Tile, Cobble, or Natural Stone designs on unattractive surfaces (driveways, sidewalks, decks, steps, etc.). These can be used at a place of business, home, health, club, sports facility, retirement center, swimming pool, or anywhere cosmetics, resurfacing, and safety may be a problem. Most skid resistant products used in this process can be sprayed using a commercial grade hopper gun. **Kits are engineered to butt together or overlap forming continuous patterns. Kits include: (4) 4’ x 8’ sheets, exception: S-5725 and S-5760. +/- 128 sq. ft. coverage. All patterns have an average 1/2” grout.
S-5710 D/M Traditional Brick
Regular brick size: 3 1/2” x 7 1/2” (sq. ft. 128)
S-5711 D/M Basket weave Brick
Regular brick size: 3 1/2” x 7 1/2” (sq. ft. 128)
S-5712 D/M Diagonal Herringbone Brick
Regular brick size: 3 1/2” x 7 1/2” (sq. ft. 99.62)(overlaps)
S-5713 D/M Diagonal Brick
Brick size: 3 1/2” x 7 1/2” & 3 1/2” sq. (sq. ft. 113.76)(overlaps)
S-5714 D/M Serpentine Brick
Average brick size: 4” x 6” (sq. ft. 106.39)
S-5720 D/M Square Tile
6” Square (sq. ft. 128)
S-5721 D/M Square Tile Offset
Brick Size: 7 1/2” sq. & 3 1/2 sq. (sq. ft. 114.34)
S-5722 D/M Cross Tile
Brick Size: 3 1/2” sq. & 6” sq. (sq. ft. 115.01)
S-5723 D/M Random Brick
Brick Size: 3 1/2” sq., 7 1/2” sq., 3 1/2” x 7 1/2”
(sq. ft. 128)
26
note
D/M MAXILAST: 1/8” (.125” ) thickDUROLAST: 1/16” (.060” ) thick
S-5725 D/M Spanish Tile/ Hexagon 7 1/2” hexagon, (8-pack)
(sq. ft. 83.16)
S-5730 D/M Key Stone/ Octagon Square Tile Size: 3 1/2” sq., 5 1/2” sq.
(sq. ft. 100)
S-5740 D/M European Fan Cobble
48” radius, +/- 6” square cobble (sq. ft. 54.29)
S-5741 D/M European Circle Cobble
42” radius, +/- 3 1/2” x 7 1/2” cobble (sq. ft. 85.57)
S-5742 D/M European Straight Cobble
+/- 3 1/2” to 7 1/2” (sq. ft. 120.67)
S-5750 D/M Natural Stone
Varies from 4” to 18” (sq. ft. 128)
S-5755 D/M Basket Swirl
Brick Size: 3 1/2” x 7 1/2” (sq. ft. 128)
S- 5756 D/M Diamond Swirl
Brick Size: 7 1/2” x 3 1/2” & 3 1/2” sq. (sq. ft. 126.01)
S-5760 D/M Soldier Border Brick
Brick Size: 3 1/2” x 7 1/2” (20-pack) (sq. ft. 108.61) (overlaps)
27
Cop
yrig
ht P
TM
20
18
Made w
ith P
ride in
the U
.S.A
.
6339
Scr
ub P
ine R
d. B
ig S
andy,
TX
75755
1-8
00-3
45-7
969
![PERMEABLE INTERLOCKING CONCRETE PAVEMENT (PICP) … · ILID INTEGRATED WITH PICP ] Permeable Interlocking Concrete Pavement: A Low Impact Development Tool PICP Meets LID Goals •](https://static.fdocuments.in/doc/165x107/604f6c43a317d40fb379e0ba/permeable-interlocking-concrete-pavement-picp-ilid-integrated-with-picp-permeable.jpg)
![PERMEABLE INTERLOCKING CONCRETE PAVEMENT (PICP) … · 2019. 6. 10. · ILID INTEGRATED WITH PICP ] Permeable Interlocking Concrete Pavement: A Low Impact Development Tool PICP Meets](https://static.fdocuments.in/doc/165x107/6046a3a7630ba6411f40aec3/permeable-interlocking-concrete-pavement-picp-2019-6-10-ilid-integrated-with.jpg)
