2017 - Polytechnique Montréal · 2017 UNIVERSITÉ MCGILL AUDITORIUM DU PAVILLON TROTTIER ......
Transcript of 2017 - Polytechnique Montréal · 2017 UNIVERSITÉ MCGILL AUDITORIUM DU PAVILLON TROTTIER ......
2017
UNIVERSITÉ MCGILL
AUDITORIUM DU
PAVILLON TROTTIER
Le développement durable des matériaux polymères et composites
Sustainability in polymer and composite materials
MERCREDI LE 7 JUIN 2017
9H À 18H
Le programme long est disponible via
l’application QR Reader
Marie-Josée POTVIN, ing., PhD
Agence Spatiale Canadienne / CSA
Les défis de l’utilisation des composites
dans le domaine spatial
Karen STOEFFLER, PhD
CNRC — NRC
Sustainable polymer products for
automotive applications
Prof. Adam DUONG
Université du Québec à Trois-Rivières
From single molecule to materials for
development in nanotechnology and
energy applications.
CONFÉRENCIERS
HORAIRE CONFÉRENCIERS
8h45 à 9h20 Inscription
9h20 à 9h30 Mot de bienvenue
9h30 à 10h15 Session 1
10h30 à 11h00 Pause café - Affiches scientifiques
11h15 à 12h00 Session 2
12h00 à 13h15 Dîner
13h15 à 14:30 Session 3
14h30 à 15h00 Pause café - Affiches scientifiques
15h00 à 16h30 Session 4
16h30 à 18h00 Cocktail & Remise des prix
Prof. Vladimir BRAILOVSKI
École de Technologie Supérieure
Fabrication additive de composants à
haute valeur ajoutée.
Prof. Eric LORANGER
Université du Québec à Trois-Rivières
TEMPO oxidized wood nanocelluloses
composites and their potential
applications
Claire BRAMMA, LCol.
National Defence,
Royal Canadian Engineers
Leading in the military engineering
domain
Marine KERARON, M.Sc.
ROBIC
Un pas de plus dans la jungle
des brevets
CONFÉRENCIERS
Dr Karen STOEFFLER, Ph.D.
National Research Council Canada
There is currently an increasing trend towards finding environmentally
friendly material alternatives to replace petroleum-based plastics in in-
dustrial applications. This is particularly true for the automotive industry,
which is considering lightweight and bio-based polymer products as effi-
cient strategies to reduce their environmental footprint.
This presentation will cover the basic concepts in the design of sustai-
nable polymers and composites. The focus will be put on the incorpora-
tion of biomass issued from non-edible resources into industrial polymer
products, with emphasis on automotive applications. Technological and
scientific challenges related to the formulation, processing and proper-
ties of those materials will be discussed.
Still think that polymers cannot be green? Come and attend this semi-
nar!
PRÉSENTATIONS ÉTUDIANTES
Keroles RIAD, étudiant PhD
Concordia
Processing Study of Composite Bonded
Repairs in Service Environment
9:30 à 9:45
Cédric PUPIN, étudiant PhD
École Polytechnique, LAVA
Mise en évidence du phénomène de
formation de porosités d’origine chimique
11:15 à 11:30
Laurent CORMIER, étudiant PhD
ÉTS
Titre à venir
13:45 à 14:00
Nury ARDILA, étudiante PhD
École Polytechnique
Titre à venir
16:00 à 16:30
CONFÉRENCIERS CONFÉRENCIERS
Marine KERARON, Agente de brevets
ROBIC, L.L.P. | Lawyers, patent and trademark agents
Je serai votre guide du jour pour vous frayer un chemin parmi les mul-
tiples concepts entourant la propriété intellectuelle et particulièrement
les brevets. Après cette présentation, l’inventeur et l’entrepreneur qui
sommeille en vous, en saura plus sur les concepts de brevetabilité et de
libre-fabrication au moyen d’exemples concrets.
Prof. Eric LORANGER
Université du Québec à Trois-Rivières
Production of cellulose nanofibers from native cellulose has been the
subject of intensive investigation during the past decade. As clearly es-
tablished in literature, cellulose nanofibers can be successfully produced
using a TEMPO-Sodium bromide Sodium hypochlorite oxidation on Kraft
pulp, a renewable source, followed by mechanical treatment. At a semi-
pilot scale, our research group as shown that this system can be further
optimized with the use of low-frequency ultrasound during oxidation. In
order to justify such TEMPO Oxidized Cellulose Nanofibers (TOCN) pro-
duction, new applications have been studied, notably in polymer
science. The talk will be articulated in new applications development by
our research team. Conventional composite with modified TOCN, the
use of pyrrole to produce a flexible organic conductive film and a po-
lymer with food packaging properties rarely seen for such biobased
composite, the use of TOCN for humidity or temperature detection by
radio-frequency (RF) system, the addition of TOCN in the polyvinylbuty-
ral (PVB) polymer matrix in protective or bullet-proof glazing will be co-
vered. All those applications are very promising uses of nanocellulose
fibres.
Prof. Adam DUONG
Université du Québec à Trois-Rivières
Attempts to construct valuable materials for catalysis, electronic, op-
toelectronic, energy conversion and energy storage by design must
overcome two main challenges: (1) The starting components must be
selected to have suitable individual properties; and (2) the topology and
functionality of the components must allow controlling the organization
of each single atom of material. Despite intense effort in recent years,
no general strategy for meeting these challenges has emerged. Howe-
ver, valuable guidelines have been provided by research in the field of
crystal engineering. Three main strategies have been particularly effi-
cient to create ordered materials in predictable ways: (1) The use of po-
lar groups that participate reliably in strong directional intermolecular
interactions such as hydrogen bonds, (2) The combination of both orga-
nic and inorganic components and (3) The linkage of complementary
molecules by covalent bonds to build well-ordered structures.
Subsequent strategies are valuable tools to determine how to fabricate
new materials that can be useful in nanotechnology and energy storage.
In this talk, I will review strategies used to build materials from the
widest range of molecular components, held together by a full spectrum
of interactions that meet basic criteria of strength and reliability.
LCol. Claire BRAMMA
National Defence, Royal Canadian Engineers
Commanding Officer Mapping and Charting
Establishment — Ottawa
Through her 19 years of military engineering experience, four keys to
successful leadership will be explained: assemble technical experts,
motivate the team, demonstrate mental agility, and foster communica-
tion.
CONFÉRENCIERS CONFÉRENCIERS
Keroles RIAD, étudiant PhD
Concordia
Cédric PUPIN, étudiant PhD
Polytechnique Montréal
Le RTM est un procédé de fabrication qui consiste à injecter de la résine
liquide dans un renfort fibreux placé à l’intérieur d’un moule rigide et
fermé. Un des inconvénients majeurs de la fabrication avec le procédé
RTM est la présence de porosités dans les pièces finales. Ces porosités
sont d’origine mécanique (emprisonnement d’air lors de l’imprégnation
du renfort) ou d’origine chimique (volatilisation d’espèces chimiques).
Les travaux présentés ici mettent en évidence la formation de porosités
d’origine chimique, en phase liquide ou solide, à l’aide d’un moule RTM
de laboratoire instrumenté et équipé d’une vitre. Cet outil a permis de
mettre en évidence des mécanismes de formation, entre autres par le
biais d’analyse d’images, ainsi que l’influence des paramètres de fabri-
cation. Ces résultats ont permis de développer deux outils de prédiction
de la porosité.
Laurent CORMIER, étudiant PhD
ÉTS
Nury Ardila, étudiante PhD
École Polytechnique
Prof. Vladimir BRAILOVSKI
École de Technologie Supérieure
Cette présentation a pour but de donner un aperçu des activités de la
Chaire de recherche ÉTS sur l'ingénierie des procédés, des matériaux
et des structures pour la fabrication additive (FA). Après une brève intro-
duction portant sur les avantages et limitations de la FA métallique et
plastique, un accent particulier sera porté sur les applications aéronau-
tiques et médicales de cette technologie.
S’ensuivra la présentation des projets qui se situent à la frontière des
domaines de la conception mécanique, des sciences des matériaux et
de la fabrication, menant à la réalisation de pièces aux fonctionnalités
uniques. Finalement, les activités d'enseignement liées à la FA et me-
nées dans le cadre de la formation universitaire et de la formation conti-
nue à l’ÉTS seront également introduites.
Dr Marie-Josée POTVIN, ing., Ph.D.
Agence Spatiale Canadienne, Canadian Space Agency
Les composites ont intégré le domaine spatial depuis quelques décen-
nies. Cependant, leur utilisation reste confinée à quelques matériaux
bien précis, présentant de bonnes propriétés pour résister à l’environne-
ment spatial caractérisé par un vide menant à un dégazage et des tem-
pératures extrêmes en cycles répétés, entre autres. Les travaux faits à
l’Agence spatiale canadienne, en collaboration avec nos partenaires
universitaires et industriels, visent à explorer les modalités d’utilisation
pour des applications lunaires et, dans une optique de développement
durable, les réparations in situ pour les thermoplastiques.