2015 10-08 - additive manufacturing software 1
-
Upload
biofabrication-group-at-university-of-pisa -
Category
Engineering
-
view
424 -
download
1
Transcript of 2015 10-08 - additive manufacturing software 1
![Page 2: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/2.jpg)
+ Question #1 07/10/2015
![Page 3: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/3.jpg)
+ Question #2 07/10/2015
![Page 4: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/4.jpg)
MEDICAL APPLICATION OF RAPID PROTOTYPING
![Page 5: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/5.jpg)
+ Invisalign Orthodontic Aligners
• An aligner for orthodontic use manufactured using a combination of rapid tooling and thermoforming.
Manufacturing, Engineering & Technology, Fifth Edition, by Serope Kalpakjian and Steven R. Schmid. ISBN 0-13-148965-8. © 2006 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved.
![Page 6: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/6.jpg)
+ Surgery
![Page 7: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/7.jpg)
+ Surgery
![Page 8: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/8.jpg)
+ Surgery
![Page 9: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/9.jpg)
+ Surgery
![Page 10: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/10.jpg)
+ Tissue Engineering - Biofabrication
• Living cells are extracted from patients and seeded onto a carrier (scaffold) which accomodates and guides the growth of new cells in 3D within laboratory environment.
![Page 11: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/11.jpg)
+ Tissue Engineering - Biofabrication
• STL Data produced from Micro-CT scan data
• Multiple specimens of identical structure can be made, reducing samples variations.
![Page 12: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/12.jpg)
OPEN QUESTION
![Page 13: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/13.jpg)
+ Open questions
• WHICH ARE THE INTELLECTUAL PROPERTY
IMPLICATIONS OF LOW-COST 3D PRINTING?
• IS THE OPEN SOURCE 3-D PRINTING AN ENABLING TECHNOLOGY FOR SELF-DIRECTED SUSTAINABLE DEVELOPMENT?
• CAN A 3D PRINTED ORGAN BE PATENTED?
![Page 15: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/15.jpg)
+ Additive manufacturing Process Flow
• Solid Modelling
• Tesselation/Generation of STL file
• Support Generation
• “Slicing” of the Model
• Model Physical Buildup
• Cleanup and Post Curing
• Surface Finishing
![Page 16: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/16.jpg)
+ from idea to design
![Page 17: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/17.jpg)
+ from idea to design
![Page 18: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/18.jpg)
+ from design to object
![Page 19: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/19.jpg)
+ from design to object
![Page 20: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/20.jpg)
+ from design to object
![Page 21: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/21.jpg)
+
CAD FILE STL FILE GCODE
3D object Triangle
and vertex Toolpath
FreeCAD FreeCAD
(MeshLab) Slic3r
(CURA) Printrun to 3DP
File
Description
Software
Additive manufacturing Process Flow
![Page 22: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/22.jpg)
+ Additive manufacturing Process Flow
CAD/CAMsystem
Imageacquisi on
Inkjetbased
Directwri ng
![Page 23: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/23.jpg)
DATA SOURCE
![Page 24: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/24.jpg)
+ Data source
• Representation of a volume
– CAD model
– Instruments output
• CT
• RM
![Page 25: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/25.jpg)
+ CAD model
Dimensions of CAD Elements
Elements Type of CAD Model
0D Point Corner Model
1D Line Edge Model
2D Surface Surface Model
3D Solid/Volume Solid or Volume Model
![Page 26: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/26.jpg)
FROM MEDICAL IMAGES TO STL Example 1
![Page 27: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/27.jpg)
+ Segmentation
• Segmentation subdivides an image into its constituent regiorns or objects.
• The level to whhc the subdivision is carried out depends on the problem being solved
![Page 28: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/28.jpg)
+ Software per l’analisi delle bioimmagini • OsiriX (www.osirix-viewer.com)
• 3DSlicer (www.slicer.org)
• ImageJ (rsb.info.nih.gov/ij)
• MIPAV (mipav.cit.nih.gov)
• itk-SNAP (www.itksnap.org)
![Page 29: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/29.jpg)
+ Image Analysis: OxiriX imaging software • Advanced open-source
DICOM PACS workstation
• Image processing
• Better communication with surgeons
![Page 30: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/30.jpg)
+ Geometry extraction
• From original CT DICOM image to final volume
• Semi-automatic procedure
• Positive results in 95% of cases
![Page 31: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/31.jpg)
+ Osirix Plugins: edge preserving smoothing
![Page 32: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/32.jpg)
+ Osirix Plugins: Level-Set segmentation • Two algorithm
– Shape detection
– Geodesic Active Contours
• Evolution based on – Propagation
– Curvature
– Advection
• Programming principles
d
dty = -aA(x) ×Ñy - bP(x) Ñy +gZ(x)k Ñy
R Malladi et al. Pattern Analysis and Machine Intelligence, IEEE Transactions on, 17(2):158 – 175, Feb 1995. V Caselles et al. International Journal of Computer Vision, 22(1):61–79, 1997.
![Page 33: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/33.jpg)
+ Osirix Plugins: Level-Set segmentation
![Page 34: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/34.jpg)
FROM 3D SCAN TO STL Use of 123DCatch
![Page 35: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/35.jpg)
+
![Page 36: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/36.jpg)
+
![Page 37: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/37.jpg)
+
![Page 38: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/38.jpg)
+
![Page 39: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/39.jpg)
+
![Page 40: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/40.jpg)
+
![Page 41: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/41.jpg)
+
![Page 42: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/42.jpg)
+
![Page 43: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/43.jpg)
+
![Page 44: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/44.jpg)
+
![Page 45: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/45.jpg)
+
![Page 46: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/46.jpg)
+
![Page 47: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/47.jpg)
+
![Page 48: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/48.jpg)
![Page 49: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/49.jpg)
![Page 50: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/50.jpg)
EXCHANGE FORMATS
![Page 51: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/51.jpg)
+ Stereolithograpy Interface
• Stereolithograpy was first commercial Solid Freeform Manufacturing (SFM) process, released in 80’s by 3-D Systems
• 3-D Systems developed interface between CAD systems and their machine
• STL files (*.stl) allow CAD systems to interface with 3-D system machines
• Virtually all subsequent SFM processes can use this same format (SFM industry standard)
• Many CAD programs now can export the *.stl file for easy conversion from CAD to part
![Page 52: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/52.jpg)
+ STL Files (*.stl)
• STL files were based on a program called Silverscreen CAD
• Silverscreen CAD represent boundary with all surfaces being approximated by polygons or groups of polygons
• *.stl files use triangles or groups of triangles to approximate surfaces
• Accuracy depends on the triangle sizes (Smaller facets produce a higher quality surface)
• Triangles assigned normal vectors for outward surface normal
• Parts are defined by representing all their bounding surfaces as faceted surfaces, using the triangular patches
![Page 53: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/53.jpg)
+ STL Files (*.stl)
• STL files describe only the surface geometry of a three dimensional object without any representation of color, texture or other common CAD model attributes.
• An STL file describes a raw unstructured triangulated surface by the unit normal and vertices (ordered by the right-hand rule) of the triangles using a three-dimensional Cartesian coordinate system.
![Page 54: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/54.jpg)
+ Example of *.stl Representation
Representing a sphere
![Page 55: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/55.jpg)
+ Example of *.stl Representation
![Page 56: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/56.jpg)
+ Existing Formats (1/2)
• 3D PDF – Proprietary, closed
• ISO 14649 (STEP-NC) – Mostly for NC control, G-Code
• STEP / IGES, SAT, Parasolid – Too complex, missing features e.g. no
mesostructure
• X3D VRML – Mesh, color, texture, lighting
All: no provision for AM, e.g. materials, internal structure
![Page 57: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/57.jpg)
+ Existing Formats (2/2)
• PLY
– 3D Scanner data
• 3DS
– Limited mesh size
• SLC
– Limited information
All: no provision for AM, e.g. materials, internal structure
![Page 58: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/58.jpg)
+ New format needed
• Tailor to AM community needs
– No content constraints
• Retain Community Control
– Not Proprietary
• Neutral
– Avoids association with existing companies
![Page 59: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/59.jpg)
+ Desired features
• simple
• ISO 9000-ish features like product tracking
• Interoperability within different manufacturers
• Compatible with FEA applications
• Identification of parent CAD program
• Restricted number of printings
• Support multiple shells
• Editable ASCII/Text format
![Page 60: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/60.jpg)
+ Desired features
• Information about build orientation
• Stability/robustness
• No redundancy
• Volume validity
• Lock or encrypt the file with a password
• Ability to put a permanent ‘watermark’
• Supporting geometry in native way
• Keep triangle mesh / No triangle mesh
![Page 61: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/61.jpg)
+ Reaching consensus, adoption
• Non proprietary / open source
• Endorsement by major CAD / Manufacturers
• Use ASTM / Voting
• Backwards compatible (STL)
• Expandable, XML
• Publish for comments / discussion
• Open source software
• Conversion tools
• Limit the scope: Not a CAD model
![Page 62: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/62.jpg)
+ Current STL
![Page 63: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/63.jpg)
+ The new proposed format
• AMF
– Additive Manufacturing Format
– Additive Manufacturing File
![Page 64: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/64.jpg)
+ XML
• Meta-format: Format of formats – Text based
– Easy to read/write/parse
– Existing editing tools
– Extensible
– Highly compressible
• Mentioned by a number of constituents – E.g. Materialise
– Based on work by J. Hiller (Cornell)
Addresses needs: Editable / Extensible /
Readable / Open / Non proprietary
![Page 65: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/65.jpg)
+ General Concept
• Part (objects) defined by regions and materials – Regions defined by triangular mesh
– Materials defined by properties/names
• Mesh properties can be specified – Color
– Tolerance
– Texture
• Materials can be combined – Graded materials
– Microstructure
![Page 66: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/66.jpg)
+ Basic Structure
Addresses needs: Simple / Watertight / Backward Compatible
(STL)
![Page 67: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/67.jpg)
+ Compressibility
Addresses needs: Small / Compressible
Need to look at dependency on # of digits
![Page 68: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/68.jpg)
+ Multiple Materials
Addresses needs: Multiple Materials, No leaks between regions
(shared vertices)
![Page 69: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/69.jpg)
+ Graded Materials
![Page 70: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/70.jpg)
+ Microstructure
Addresses needs: Periodic
meso/microstructure
![Page 71: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/71.jpg)
+ Material properties
• By manufacturer’s name – <Name> ABS </Name>
– <Name>Tango Black </Name>
– <Name>Nylon 1234 </Name>
• By physical property – </Property Type=“Elastic Modulus”
Value=“4E9”>
– </Property Type=“Poisson Ratio” Value=“1.2”>
• External reference (URL)
Addresses needs: Material
specifications/libraries
![Page 72: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/72.jpg)
+ Color and Graphics
• By volumetric region
– Solid color
• By vertex
– Specify Vertex color
– Specify Vertex coordinate in a bitmap
Addresses needs: Color graphics
![Page 73: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/73.jpg)
+ Color and Graphics
![Page 74: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/74.jpg)
+ Tolerances
• By volumetric region
– Nominal tolerance
– Allowed variation from original volume
• By vertex
– Specify point tolerance (?)
– Point to point
Addresses needs: Tolerance
![Page 75: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/75.jpg)
+ Non-meshed geometry?
• Other representations are not mutually exclusive
• Voxel maps
– For digital/inkjet microstructure
• NURBS
– Add slope vectors to some triangle mesh edges
– Other STEP types?
• Functional Representations
– implicit equations
NURBS PATCH
PLANNAR PATCH
![Page 76: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/76.jpg)
+
NURBS PATCH
PLANNAR PATCH
Nurbs patch
• Optionally add slope vectors to some triangle mesh edges to allow for very accurate geometry.
– Perfect sphere can be made with ~20 patches
![Page 77: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/77.jpg)
+ Print Constellation
• Print orientation
• Duplicated objects
• Sets of different objects
• Efficient nesting
• Hierarchical
![Page 78: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/78.jpg)
+ Metadata
<Metadata> <Datum ID=“Author” Data=“John Doe”></Datum> <Datum ID=“Company” Data=“…”></Datum> <Datum ID=“Description” Data=“…”></Datum> <Datum ID=“Originating CAD System” Data=“…”></Datum> <Datum ID=“Originating CAD File” Data=“…”></Datum> <Datum ID=“Comment” Data=“…”></Datum> </Metadata>
![Page 79: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/79.jpg)
+ Encryption
<Metadata> <Datum ID=“Author” Data=“John Doe”></Datum> <Datum ID=“Company” Data=“…”></Datum> <Datum ID=“Description” Data=“…”></Datum> <Datum ID=“Comment” Data=“…”></Datum> <Datum ID=“Encryption” Data=“Prompt”></Datum> </Metadata>
![Page 80: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/80.jpg)
+ Watermark / Copyright
<Metadata> <Datum ID=“Author” Data=“John Doe”></Datum> <Datum ID=“Company” Data=“…”></Datum> <Datum ID=“Description” Data=“…”></Datum> <Datum ID=“Comment” Data=“…”></Datum> <Datum ID=“Copyright” Data=“Owner”></Datum> </Metadata>
![Page 81: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/81.jpg)
+ Other features
• URL can be used in lieu of material data to allow for external libraries
• Validation checksums – E.g. Original vs. actual part/region volumes
• Automatic error checking – Readers/writers must check for intact topology,
e.g. • All nodes referenced by at least 3 triangles
• All edges referenced exactly twice per region
![Page 82: 2015 10-08 - additive manufacturing software 1](https://reader031.fdocuments.in/reader031/viewer/2022020203/58f008591a28ab8a238b4585/html5/thumbnails/82.jpg)
+ ISO STANDARD