2013 NAVIGATION SYSTEM - Nissan USA S MANUAL N13E LC2UX1 NISSAN NAVIGATION SYSTEM HELP-DESK CONTACT...

®

For your safety, read carefully and keep in this vehicle.

20

13

NIS

SA

N N

AV

IGATIO

N S

YS

TE

MLC

2

Printing : December 2012 (04)

Publication No.:

Printed in U.S.A. LC2

2013 NAVIGATIONSYSTEM

OWNER’S MANUAL

N13E LC2UX1

NISSAN NAVIGATION SYSTEM HELP-DESK CONTACT INFORMATION

For assistance or inquiries about the NIS-

SAN Navigation System, or to order updated

map data, contact the NISSAN NAVIGATION

SYSTEM HELPDESK at:

• ADDRESS: P.O. Box 1588,

Orem, UT 84059-992

• E-MAIL: [email protected]

• WEB SITE: www.navigation.com or

www.nissan.ca

• PHONE: 1-888-661-9995

• HOURS: 6:00 AM to 5:00 PM

(Pacifi c Time)

NISSAN CONSUMER AFFAIRS DE-PARTMENT

For assistance or inquiries about the NISSAN

warranty, service or general questions, contact

the NISSAN Consumer Affairs Department at:

For U.S. customers

Nissan North America, Inc.

Consumer Affairs Department

P.O. Box 685003

Franklin, TN 37068-5003

1-800-NISSAN-1

(1-800-647-7261)

For Canadian customers

Nissan Canada Inc.

5290 Orbitor Drive

Mississauga, Ontario L4W 4Z5

1-800-387-0122

Thank you for purchasing a NISSAN vehicle

This user’s manual is for the navigation system

only. This manual contains operating instruc-

tions for the NISSAN Navigation System of-

fered in your NISSAN vehicle.

Please read this manual carefully to ensure safe

operation of the navigation system.

• Because of possible specifi cation changes

and optional equipment, sections of this

manual may not apply to your vehicle.

• All information, specifi cations and illustra-

tions in this manual are those in effect

at the time of printing. NISSAN reserves

the right to change specifi cations or

design at any time without notice.

• Do not remove this manual from the vehicle

when selling this vehicle. The next user of

this navigation system may need the manual.

FOREWORD

Table ofContents

Introduction

Getting started

Map settings

Navigation

Other settings

General system information

Troubleshooting guide

Index

1

2

3

4

5

6

7

8

1 Introduction

How to use this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2For safe operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2Reference symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2Laser product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

This manual uses special words, symbols andicons that are organized by function.

Please refer to the following items to understandhow to use this manual properly.

FOR SAFE OPERATION

m WARNINGIndicates the presence of a hazard thatcould cause death or serious personalinjury. To avoid or reduce the risk, theprocedures must be followed precisely.

CAUTIONIndicates the presence of a hazard thatcould cause minor or moderate per-sonal injury or damage to your vehicle.To avoid or reduce the risk, the proce-dures must be followed carefully.

NOTE:

Indicates items that help you understandand maximize the performance of yourvehicle. If ignored, they may lead to a mal-function or poor performance.

REFERENCE SYMBOLS

INFO:

Indicates information that is necessary for effi-cient use of your vehicle or accessories.

Reference page:

Indicates the title and page that you should referto.

NAV:

This is an example of how a button on the controlpanel will be shown.

“Route”:

This is an example of a key/item displayed on thescreen.

This system is primarily designed to help youreach your destination, and it also performs otherfunctions as outlined in this manual. However,you, the driver, must use the system safely andproperly. Information concerning roadconditions, traffic signs and the availability ofservices may not always be up-to-date. The sys-tem is not a substitute for safe, proper and legaldriving.

Before using the navigation system, please readthe following safety information. Always use thesystem as outlined in this manual.

m WARNING● To operate the navigation system,

first park the vehicle in a safe loca-tion and set the parking brake. Oper-ating the system while driving candistract the driver and may result in aserious accident.

● Do not rely on route guidance alone.Always be sure that all driving ma-neuvers are legal and safe in order toavoid accidents.

● Do not disassemble or modify thissystem. If you do, it may result inaccidents, fire or electrical shock.

HOW TO USE THIS MANUAL SAFETY INFORMATION

1-2 Introduction

● If you notice any foreign objects inthe system hardware, spill liquid onthe system or notice smoke or asmell coming from it, stop using thesystem immediately and contact aNISSAN dealer. Ignoring such condi-tions may lead to accidents, fire orelectrical shock.

CAUTION● Do not use this system if you notice

any malfunctions such as a frozenscreen or the lack of sound. Contin-ued use of the system may result inaccidents, fire or electrical shock.

● Some states/provinces may havelaws limiting the use of videoscreens while driving. Use this sys-tem only where it is legal to do so.

● Extreme temperature conditions [be-low -4 °F (-20 °C) and above 158 °F(70 °C)] could affect the performanceof the system.

NOTE:

Do not keep the navigation system runningwith the engine stopped. Doing so maydischarge the vehicle battery. When youuse the navigation system, always keepthe engine running.

m WARNING● Do not disassemble or modify this

system. There are no user service-able parts in this navigation system.

● If maintenance, adjustments and op-erations other than those specifiedin this manual are attempted, injurydue to laser radiation and exposurecould occur.

Required XM SatelliteRadio, NavTraffic andNavWeatherXMmonthly subscriptionssold separately. Notavailable in Alaska,Hawaii or Guam.

LASER PRODUCT

Introduction 1-3

NavTraffic andNavWeatherXM onlyavailable in selectmarkets. For moreinformation, visitwww.siriusxm.com/navtrafficandwww.siriusxm.com/navweather.

1-4 Introduction

2 Getting started

Control buttons and functions. . . . . . . . . . . . . . . . . . . . . . . 2-2Control panel (Type A) . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Control panel (Type B) . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3Steering wheel switch (Type A) . . . . . . . . . . . . . . . . . . 2-4Steering wheel switch (Type B) . . . . . . . . . . . . . . . . . . 2-4Steering wheel switch (Type C) . . . . . . . . . . . . . . . . . . 2-5

Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6Functions disabled while driving. . . . . . . . . . . . . . . . . . 2-6Touch screen operation . . . . . . . . . . . . . . . . . . . . . . . . . 2-6Menu screen operation. . . . . . . . . . . . . . . . . . . . . . . . . . 2-7How to input characters . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

CONTROL PANEL (Type A)

�1 VOL (volume) control knob/PWR (power)button:

Rotate clockwise to increase the volume orcounterclockwise to lower the volume.

Press to turn the audio system on or off.

�2 Touch screen display

�3 TUNE-SCROLL dial / ENTER/AUDIO button:

Turn to scroll through the items in a list.Press to select a menu item. When thescreen is not displaying a list or menu, theknob is used to control the audio system.

Press the ENTER/AUDIO button to select ahighlighted item on the screen.

�4 BACK button:

Press to return to the previous screen or todelete the last inputted letter if a touch key-board is displayed on the screen.

�5 MAP button:

Press to display the current location mapscreen.

�6 NAV button:

Press to access the functions of the Navi-gation system.

�7 MENU button:

Press to access the system settings.

�8 button:

Press to change the display brightness be-tween day and night modes. While themode is being displayed, the brightness canbe adjusted using the TUNE/SCROLL dial.

Press and hold for more than two secondsto switch the display to a larger display ofthe digital clock.

“DISPLAY SETTINGS”(page 5-3)

LNV2017

CONTROL BUTTONS AND FUNC-TIONS

2-2 Getting started

CONTROL PANEL (Type B)

�1 Touch screen display

�2 MAP button:

Press to display the current location mapscreen.

�3 NAV button:

Press to access the functions of the Navi-gation system.

�4 MENU button:

Press to access the system settings.

�5 BACK button:

Press to return to the previous screen or todelete the last inputted letter if a touch key-board is displayed on the screen.

�6 TUNE dial/AUDIO button:

Turn to scroll through the items in a list.Press to select a menu item. When thescreen is not displaying a list or menu, theknob is used to control the audio system.

Press the dial to select a highlighted item onthe screen.

�7 button:

Press to change the display brightness be-tween day and night modes. While themode is being displayed, the brightness canbe adjusted using the TUNE dial.

Press and hold for more than two secondsto switch the display to a larger display ofthe digital clock.


�8 VOL (volume) control knob/ON-OFF button:

Rotate clockwise to increase the volume orcounterclockwise to lower the volume.

Press to turn the audio system on or off.LNV2396

Getting started 2-3

STEERING WHEEL SWITCH(Type A)

�1 ENTER button / tuning switchScrolls up and down through lists and se-lects the highlighted item on the screen.

�2 (back) buttonReturns to the previous screen or deletesthe last inputted letter if a touch keyboard isdisplayed on the screen.

�3 Volume increase buttonIncreases the volume of the voice guidancegiven by the Navigation System if pressedwhile the voice guidance is speaking. If thevolume increase button is pressed at anyother time, only the volume of the activescreen (phone, SMS playback, Voice Rec-ognition system [if so equipped], audio sys-tem) will be increased.

�4 Volume decrease buttonDecreases the volume of the voice guidancegiven by the Navigation System if pressedwhile the voice guidance is speaking. If thevolume decrease button is pressed at anyother time, only the volume of the activescreen (phone, SMS playback, Voice Rec-ognition system [if so equipped], audio sys-tem) will be decreased.

For more information about the audio system,Bluetooth® Hands-Free Phone System andVoice Recognition system (if so equipped), seethe vehicle’s Owner’s Manual.

STEERING WHEEL SWITCH(Type B)

�1 Tuning switchScrolls up and down through lists and se-lects the highlighted item on the screen.

�2 Volume control buttonIncreases or decreases the volume of thevoice guidance given by the Navigation Sys-tem if pressed while the voice guidance isspeaking. If the volume button is pressed atany other time, only the volume of the activescreen (phone, SMS playback, Voice Rec-ognition system [if so equipped], audio sys-tem) will be adjusted.

Altima LNV2018 Titan LNV2391

2-4 Getting started


STEERING WHEEL SWITCH(Type C)

�1 Volume control buttonIncreases or decreases the volume of thevoice guidance given by the Navigation Sys-tem if pressed while the voice guidance isspeaking. If the volume button is pressed atany other time, only the volume of the activescreen (phone, SMS playback, Voice Rec-ognition system [if so equipped], audio sys-tem) will be adjusted.


Sentra LNV2395 Xterra and Frontier LNV2399 NV200 LNV2002

Getting started 2-5

FUNCTIONS DISABLED WHILEDRIVINGTo ensure safe driving, some functions cannot beoperated or have limited operation when the ve-hicle is moving. The on-screen text and keys forthese restricted functions will be “grayed out” ormuted and cannot be selected while driving.

All text input screens are grayed out while thevehicle is moving. Other functions are locked outdepending on vehicle speed, the function andthe number of times a feature is selected.

When a menu selection is grayed out, the fea-ture is locked out until the system operating con-ditions are met to allow the selection.

TOUCH SCREEN OPERATIONThe same operations described for the scrollingdial are possible using touch screen operation.

Examples of touch screen operationSelecting an item:

When any item is touched, the next screen isdisplayed.

LNV2266 LNV2267 LNV2370

BASIC OPERATION

2-6 Getting started

Adjusting:

Touch the “+”, “-”, “>” or “<” key to adjust asetting.

Scrolling through a message or list:

Touch the (up) or (down) keys onthe screen repeatedly to scroll through a mes-sage or a list. When scrolling a lengthy list, youcan also touch the screen and slide your fingeralong the scroll bar where shown to scroll morequickly.

MENU SCREEN OPERATION

LNV2238 LNV0921(Type A) LNV2019

Getting started 2-7

Menu screens and their purposePress one of the application buttons to activatethe corresponding menu screen:

● NAV (Navigation)

● MENU

How to select a menu item1. As an alternative to using the touch screen,

turn the scrolling dial clockwise or counter-clockwise to scroll through the menu itemsuntil the preferred item is highlighted.

2. To select the preferred item, press thescrolling dial.

3. Press the BACK or BACK button.The previous screen will be displayed andthe changes will be saved.

HOW TO INPUT CHARACTERSCharacter (letter and number) inputscreenAlphanumeric characters are used when settinga destination, searching for an address, editingstored locations, etc.

1. Touch characters on the touch keyboardand they will appear in the field at the top ofthe screen. When the entry is complete,touch the “OK” key.

Alternatively, use the scrolling dial to high-light a character and press the dial to selectthat character.

NOTE:

● Press the BACK or BACK button todelete the last inputted character or to returnto the previous screen if no characters havebeen inputted.

● On every character entry screen, the touchkeyboard will display only the letters that arepossible to enter after the current letter.

● Symbol and number keys are available whenthe “123/ABC” key is touched.

(Type B) LNV2397 LNV2205

2-8 Getting started

● Touch the “123/ABC” key to toggle the dis-play between the touch keyboard for lettersand the touch keyboard for numbers andsymbols.

2. To delete the last entry, touch the “Delete”key or hold it to delete all entries at once.

3. After finalizing the entries, touch the “OK”key or touch the “List” key for the completedlist screen.

NOTE:

● If a phrase is being entered that has been pre-viously entered into the system, the matchedtext may appear in light gray. Touch “OK” tosearch for the matched text. Touch “List” tosearch for both the matched text and enteredtext.

Getting started 2-9

2-10 Getting started

MEMO

3 Map settings

Map types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22-Dimensional (2D) view . . . . . . . . . . . . . . . . . . . . . . . . 3-23-Dimensional (3D) view . . . . . . . . . . . . . . . . . . . . . . . . 3-2Screen information (2D or 3D) . . . . . . . . . . . . . . . . . . . 3-3

Moving a map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4Returning to the current vehicle location. . . . . . . . . . . 3-4

Map options menu screen . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Changing the map scale . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Map scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6Looking at information on the map . . . . . . . . . . . . . . . . . . . 3-6

Map symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6Map settings for the map screen . . . . . . . . . . . . . . . . . . . . 3-8Lane information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Map SD-card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

How to handle the SD-card. . . . . . . . . . . . . . . . . . . . . 3-12SD-card replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12How to order map data updates. . . . . . . . . . . . . . . . . 3-12About the map data. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12End-user terms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

2-DIMENSIONAL (2D) VIEWThe 2D map is a two-dimensional (flat) repre-sentation of the map data, similar to a road map,focused on the vehicle’s position (vehicle icon).

“SCREEN INFORMATION (2D or3D)” (page 3-3)

“MAP SETTINGS FOR THE MAPSCREEN” (page 3-8)

3-DIMENSIONAL (3D) VIEWThe 3D map displays the map from an elevatedperspective, providing a panoramic view over along distance.

The map in 3D view always appears with the cur-rent forward direction facing up (heading up).

“SCREEN INFORMATION (2D or3D)” (page 3-3)

“MAP SETTINGS FOR THE MAPSCREEN” (page 3-8)

2D

LNV2025

3D

LNV2026

MAP TYPES

3-2 Map settings

SCREEN INFORMATION (2D or 3D)

�1 “Voice” key

Touch to repeat the voice guidance while aroute is active. Touch and hold for two sec-onds to toggle the voice guidance on or off(button will be grayed out when voice guid-ance is turned off). This option is availableonly when a route is set.

�2 Audio information

Indicates the radio station, CD track numberor other audio information currently playing.

�3 Next maneuver road name

Indicates the name of the next road in theroute guidance. This is only shown if routeguidance is active.

�4 Clock

Indicates the current time.

�5 Direction indicator and distance to next ma-neuver on the routeWhen route guidance is active but you havedeviated from the route, this area displays acompass icon with an arrow indicating thedestination direction.

When route guidance is active and you areon the route, this area indicates the dis-tance (in miles or kilometers) to the nextpoint and the turning direction at that point.

When the “Voice” key is not shown on thescreen (such as when an audio screen isdisplayed on the screen), touch the direc-tion indicator to repeat the voice guidancewhile a route is active. Touch and hold fortwo seconds to toggle the voice guidanceon or off.

�6 Estimated time of arrival and distance todestination or remaining time of travel anddistance to destination.

Touch this button to switch the indicator be-tween estimated arrival time and remainingtravel time. This indicator only appears oncethe destination is set and the route guid-ance is initiated. The estimated arrival timemay not switch to the estimated arrival timefor the destination’s time zone if a time zoneline is crossed as part of the route.

�7 Current road indicator

The location of where the car is positioned.

�8 Vehicle icon

Indicates the current location and directionof the vehicle.

LNV2206

Map settings 3-3

�9 Suggested route

Appears as a bold blue line during routeguidance.

�10 Scale indicator

Indicates the scale of the map.

�11 Compass icon

Indicates the direction of the map. Touchthis icon to switch the map view betweenthe North Up, Heading Up (or actual direc-tion) and 3D modes.

�12 “Presets” key

This option toggles on and off with the“Menu” key and displays a touch menu ofthe radio presets on the screen. For moreinformation about the audio system, see thevehicle Owner’s Manual.

�13 Zoom in and zoom out keys

Touch to zoom the map in or out.

�14 “Options” key

Touch this key to access the map optionsmenu screen.

“ MAP OPTIONS MENUSCREEN” (page 3-5)

To scroll the map in either direction:

1. Touch and release the screen anywhere onthe map.

2. Touch the screen again and move your fin-ger along the screen in the direction youwish to scroll.

After releasing and touching the map again, amarker will be displayed at the point touchedand, if possible, the position determined.

NOTE:

● If the map is in 3D view, touching the map toscroll will automatically switch the map to the2D view and will automatically orientate themap North Up.

● If the map is in 2D view, the map will be ori-ented North Up.

● When the current location of the vehicle isrecognized, the street name will be displayedat the bottom of the screen. When scrolling amap and an area that is not a road, city or POIis touched, coordinates corresponding to themarker’s position are displayed at the bottomof the screen.

RETURNING TO THE CURRENT VE-HICLE LOCATIONThe basic map screen displays the current loca-tion of the vehicle. The current location can bedisplayed again even after the map is moved, orafter the menu screen is displayed.

Press the MAP button or the BACK orBACK button and the current location will bedisplayed on the map.

LNV2207

MOVING A MAP

3-4 Map settings

The Map Options menu allows you to quicklystore the current position, show position infor-mation or destination information, and adjust themap settings.

1. Touch the “Options” key while the routeguidance map is displayed.

2. The following options are available for se-lection:

● Places Along RouteSelect to choose the types of places todisplay along the active route. Availableoptions are gas stations, restaurants,ATMs, parking, rest areas, hotels, dealer-ships and airports.

NOTE:

Some places of interest on divided high-ways may show the equivalent place of in-terest on the opposite side of the road (suchas a rest area) as being closer than the placein your traveling direction. Confirm locationof the place before following the route.

● Show Entire Route Along MapSelect to display the entire route on thescreen. The view will zoom to the neces-sary level in order to show both the start-ing point and destination on the screen.

● Show Destination InformationSelect to show Information such as theaddress and phone number (if available)for the destination. If waypoints are alsopart of the route, a list will display withthe destination and all waypoints. Touchan item to see information for that desti-nation or waypoint.

● Store Current PositionSelect to store the current position. Akeyboard is displayed to allow for a newname for the location to be entered ifdesired.

● Show Position InformationSelect to display the latitude, longitudeand altitude for the current position of thevehicle.

● Map Setup

“ MAP SETTINGS FOR THEMAP SCREEN” (page 3-8)

LNV2031

MAP OPTIONS MENU SCREEN

Map settings 3-5

When zooming in or out, the scale on the bottomleft side of the screen changes to indicate thenew scale level.

MAP SCALE

The following scales are available depending onthe map view:

2D view 3D view

Per approximately 1/2 inch(1 cm)

Per approximately 1/2 inch(1 cm)

150 ft (50 m) 150 ft (50 m)

300 ft (100 m) 300 ft (100 m)

600 ft (200 m) 600 ft (200 m)

1/4 mile (500 m) 1/4 mile (500 m)

1/2 mile (1 km) 1/2 mile (1 km)

1 mile (2 km) 1 mile (2 km)

2D view 3D view

2.5 mi (5 km) —

5 mi (10 km) —

10 mi (20 km) —

25 mi (50 km) —

50 mi (100 km) —

100 mi (200 km) —

250 mi (500 km) —

Icons of various categories of locations can bedisplayed on the map.

MAP SYMBOLSThis navigation system uses symbols to displayvarious types of facilities. The following icons areused on the map screen:

LNV2208

CHANGING THE MAP SCALE LOOKING AT INFORMATION ON THEMAP

3-6 Map settings

LNV2204

Map settings 3-7

Other settings are available for the map screen,such as switching the map view or changing themap direction.

1. Press the MENU button.

2. Touch the “Settings” key.

3. Touch the “Navigation” key. 4. Touch the “Map Settings” key.

When selected, the system will offer the fol-lowing map setting options:

LNV2371 LNV2210 LNV2211

MAP SETTINGS FOR THE MAPSCREEN

3-8 Map settings

● Map View

Touch the “Map View” key to toggle be-tween the 2D or 3D map view.

● 2D North / Heading Up

Touch the “2D North / Heading Up” key totoggle the display between “Head” and“North” for the 2D mode. When “Head” isselected, the screen shows the map in thedriving direction. When “North” is selected,the top of the map is always orientatednorth. This option can only be selectedwhen the “Map View” is set to 3D.

● Auto Zoom

Touch the “Auto Zoom” key to choose a set-ting for automatic zooming. Available set-tings are “Never”, “Always” and “Only with aRoute”

● Guidance Settings

Touch the “Guidance Settings” key to dis-play a list of features that can be enabled ordisabled on the map screen:

● Split Map for Freeway ExitSelect to toggle on or off the split viewmap when approaching a freeway exit.

● Show Lane InformationSelect to toggle on or off lane informationwhen available.

● Show Speed LimitSelect to toggle on or off the display ofspeed limit information when available.

● My Places AlertSelect to control the My Places alert.Choose “Off” to disable the alert.Choose “Show Only” to have the alertdisplayed on the screen. Choose “Show& Beep” to have an audible beep in addi-tion to the alert displayed on the screen.

● Speed Limit WarningSelect to control the speed limit alert thatactivates when the vehicle speed isgreater than the speed limit informationfor the current location. Choose “Off” todisable the alert. Choose “Show Only” tohave the alert displayed on the screen.Choose “Show & Beep” to have an au-dible beep in addition to the alert dis-played on the screen.

● Speed Limit SensitivitySelect the sensitivity level for the speedlimit warning. Choose a value betweenzero and 30.

● Speed Warning for CurvesSelect to control the alert that activatesdepending on vehicle speed and a curvein the road ahead. Choose “Off” to dis-able the alert. Choose “Show Only” tohave the alert displayed on the screen.Choose “Show & Beep” to have an au-dible beep in addition to the alert dis-played on the screen.

LNV2074 LNV2075

Map settings 3-9

● Show Places on Map

Touch the “Show Places on Map” key to ac-tivate or deactivate the display of placesicons on the map. Available places are gasstations, parking, hotels, airports,restaurants, local train stations, hospitals,banks and auto repair.

Certain place icons will appear as the brandlogo for that place. However, places repre-sented by a brand logo on the map may notnecessarily be named the same as thebrand of the logo.

● Map Data Information

Touch the “Map Data Information” key andthe follow-up screen will display the versionof the current installed map.

“MAP SD-CARD” (page 3-11)

NOTE:

A message may be displayed when newmap data is available (if so equipped). Ifsuch a message is shown, contact aNISSAN dealer for more information.

When the vehicle is approaching a junction orinterchange, the screen switches to a split view.Lane information is graphically displayed on theleft side of the split screen and icons showingthe proper lanes for upcoming maneuvers areshown in the upper right corner below the clock.

The highlighted lanes are those from which thenext maneuver on the route will be made. Lanesdisplayed in gray are those that do not follow theroute at the upcoming junction or interchange.The icons in the upper right corner also indicatedirection and may change as the junction or in-terchange approaches (for example, straightahead, to straight and then right).

Once the vehicle passes through the junction orinterchange, the screen returns to the previousview.

LNV2077 LNV2076 LNV2247

LANE INFORMATION

3-10 Map settings

NOTE:

Lane information is not available for allareas. It will only be displayed in areaswhere the necessary map data is available.

NOTE:

The number of lane icons in the upper rightcorner may change as the junction or inter-change approaches due to a difference inthe number of available lanes.

The SD-card slot is located on the front of theunit. When you purchase this system, an SD-card with map data is provided.

NOTE:

● Before inserting the map SD-card confirmthat there is no SD-card already in the slot.

● The SD-card slot can only read the SD-cardwith map data provided specifically for usewith the vehicle’s navigation system. The sys-tem will not read other SD-cards.

● If an SD-card with something other than mapdata (such as music, pictures or movies) is in-serted into the slot, the Navigation System willnot function. A message will appear prompt-ing for the map SD-card to be reinserted. Thismessage will not appear if the SD-card is re-moved while in audio mode. The audio modeis not affected by the SD-card.

LNV2248Type A LNV2180 Type B LNV2388

MAP SD-CARD

Map settings 3-11

HOW TO HANDLE THE SD-CARD

When handling the SD-card, please be carefuland adhere to the following instructions:

CAUTION● Handle the SD-card with care. Never

touch the metal contacts.

● Do not use any conventional cleaner,benzine, thinner, or antistatic spray.

● If you need to clean the SD-card usea soft cloth.

● Never attempt to use an SD-card thathas been cracked, deformed or re-paired using adhesive. Doing so maydamage the equipment.

● Do not try to bend the SD-card. Donot use any SD-card that is bent orcracked.

● Do not put on any sticker or writeanything on the SD card.

● Handle the SD-card carefully toavoid contamination or flaws.Otherwise, the data may not be readproperly.

● Do not store the SD-card in locationsexposed to direct sunlight, or in hightemperatures or humidity.

● Always place the SD-card in its stor-age case when not in use.

SD-CARD REPLACEMENTFor additional SD-cards with map data, contactthe NISSAN Navigation Helpdesk.

HOW TO ORDER MAP DATA UP-DATESTo order updated map data, contact the NISSANNavigation Helpdesk. See the contact informa-tion on the inside front cover of this manual.

ABOUT THE MAP DATA● Bosch has compiled the digitized map data

into a usable format. © 2011 Robert BoschGmbH all rights in compilation softwarereserved. Due to the production timing of themap data, some new roads may not beincluded, or some names and roads may bedifferent from those in use at the time this mapdata is used.

● Traffic control and regulation data used in thismap data may be different from those in use atthe time this map data is used. When driving,follow the actual traffic control signs and no-tices on the roads.

● Reproducing or copying this map software isstrictly prohibited by law.

m WARNING● This navigation system should not be

used to replace your own judgement.No itinerary suggested by this navi-gation system should ever overrideany freeway regulations, your ownjudgement, or a knowledge of safedriving practices. Do not follow thenavigation system’s suggested itin-erary if it would cause you to performa dangerous or illegal act, place youin a dangerous situation, or take youinto an area you consider unsafe.

3-12 Map settings

● The advice provided by the naviga-tion system is to be regarded as asuggestion only. There may be timeswhen the navigation system displaysthe vehicle’s location incorrectly,fails to suggest the shortest route, orfails to direct you to your desireddestination. In such instances, relyon your own judgement taking intoaccount the driving conditions at thetime.

● Do not use the navigation system tolocate emergency services. The data-base does not contain a completelisting of emergency services such aspolice stations, fire stations, hospi-tals and walk-in clinics. Please showdiscretion and ask for directions insuch instances.

● As the driver, you alone are respon-sible for your driving safety.

– In order to avoid a traffic accident,do not operate the system whiledriving.

– In order to avoid a traffic accident,operate the system only when thevehicle is stopped at a safe placeand the parking brake is on.

– In order to avoid a traffic accidentor traffic offence, remember thatactual road conditions and trafficregulations take precedence overthe information contained on thenavigation system.

– The software may contain inaccu-rate or incomplete informationdue to the passage of time,changing circumstances, and thesources of information used.Please respect current traffic con-ditions and regulations at alltimes while driving.

– Where actual road conditions andhighway regulations differ fromthe information contained on thenavigation system, abide by thehighway regulations.

– Keep the amount of time spentviewing the screen while drivingto a strict minimum.

The navigation system does not provide, nor rep-resent in any way information on: traffic andhighway regulations; technical aspects of the ve-hicle including weight, height, width, load andspeed limits; road conditions including grade,percentage of incline and surface conditions;obstacles such as the height and width ofbridges and tunnels; and other current driving orroad conditions. Always rely on your own judge-ment when driving a car, taking into account cur-rent driving conditions.

The company trademarks used in this product toidentify locations and business offices are thetrademarks of their respective owners. Their usedoes not represent sponsorship, approval orrecommendation of this product by thesecompanies.

END-USER TERMSThe data (“Data”) is provided for your personal,internal use only and not for resale. It is pro-tected by copyright, and is subject to the follow-ing terms and conditions which are agreed to byyou, on the one hand, and NISSAN and its licen-sors (including their licensors and suppliers) onthe other hand.

© 2011 NAVTEQ. All rights reserved.

Map settings 3-13

The Data for areas of Canada includes informa-tion taken with permission from Canadianauthorities, including: © Her Majesty the Queenin Right of Canada, © Queen’s Printer forOntario, © Canada Post Corporation,GeoBase®, © Department of Natural Re-sources Canada.

NAVTEQ holds a non-exclusive license from theUnited States Postal Service® to publish andsell ZIP+4® information.

©United States Postal Service® 2009. Pricesare not established, controlled or approved bythe United States Postal Service®. The follow-ing trademarks and registrations are owned bythe USPS: United States Postal Service, USPS,and ZIP+4.

The Data may include or reflect data of licensors,including Her Majesty the Queen in the Right ofCanada (“Her Majesty”), Canada PostCorporation (“Canada Post”) and the Depart-ment of Natural Resources Canada (“NRCan”).Such data is licensed on an “as is” basis. Thelicensors, including Her Majesty, Canada Postand NRCan, make no guarantees, representa-tions or warranties respecting such data, eitherexpress or implied, arising by law or otherwise,including but not limited to, effectiveness,completeness, accuracy or fitness for a particu-lar purpose.

The licensors, including Her Majesty, CanadaPost and NRCan, shall not be liable in respect ofany claim, demand or action, irrespective of thenature of the cause of the claim, demand or ac-tion alleging any loss, injury or damages, director indirect, which may result from the use or pos-session of the data or the Data. The licensors, in-cluding Her Majesty, Canada Post and NRCan,shall not be liable in any way for loss of revenuesor contracts, or any other consequential loss ofany kind resulting from any defect in the data orthe Data.

End User shall indemnify and save harmless thelicensors, including Her Majesty, Canada Postand NRCan, and their officers, employees andagents from and against any claim, demand oraction, irrespective of the nature of the cause ofthe claim, demand or action, alleging loss, costs,expenses, damages or injuries (including injuriesresulting in death) arising out of the use or pos-session of the data or the Data.

Terms and conditionsPersonal Use Only:

You agree to use this Data together withNISSAN Automotive Products for the solelypersonal, non-commercial purposes for whichyou were licensed, and not for service bureau,timesharing or other similar purposes.Accordingly, but subject to the restrictions set

forth in the following paragraphs, you may copythis Data only as necessary for your personal useto view it, and save it, provided that you do notremove any copyright notices that appear and donot modify the Data in any way. You agree not tootherwise reproduce, copy, modify, decompile,disassemble or reverse engineer any portion ofthis Data, and may not transfer or distribute it inany form, for any purpose, except to the extentsuch restrictions are expressly prohibited or lim-ited by applicable law.

Restrictions:

Except where you have been specifically li-censed to do so by NISSAN and without limitingthe preceding paragraph, you may not:

a. use this Data with any products, systems, orapplications installed or otherwise connectedto or in communication with vehicles, capableof vehicle navigation positioning, dispatch,real time route guidance, fleet managementor similar applications;

b. use this Data with or in communication withany positioning devices or any mobile orwireless-connected electronic or computerdevices, including without limitation mobilephones, palmtop and handheld computers,pagers, and personal digital assistants orPDAs.

3-14 Map settings

Warnings:

The Data may contain inaccurate or incompleteinformation due to the passage of time, changingcircumstances, sources used and the nature ofcollecting comprehensive geographic data, anyof which may lead to incorrect results.

No Warranty:

This Data is provided to you “as is,” and youagree to use it at your own risk. NISSAN and itslicensors (and their licensors and suppliers)make no guarantees, representations or warran-ties of any kind, express or implied, arising by lawor otherwise, including but not limited to,content, quality, accuracy, completeness,effectiveness, reliability, fitness for a particularpurpose, usefulness, use or results to be ob-tained from this Data, or that the Data or serverwill be uninterrupted or error-free.

Disclaimer of Warranty:

NISSAN AND ITS LICENSORS (INCLUDINGTHEIR LICENSORS AND SUPPLIERS) DIS-CLAIM ANY WARRANTIES, EXPRESS ORIMPLIED, OF QUALITY, PERFORMANCE, MER-CHANTABILITY FITNESS FOR A PARTICULARPURPOSE OR NON-INFRINGEMENT.

Some countries, local laws and territories do notallow certain warranty exclusions, so to that ex-tent the above exclusion may not apply to you.

Disclaimer of Liability:

NISSAN AND ITS LICENSORS (INCLUDINGTHEIR LICENSORS AND SUPPLIERS) SHALLNOT BE LIABLE TO YOU: IN RESPECT OFANY CLAIM, DEMAND OR ACTION, IRRE-SPECTIVE OF THE NATURE OF THE CAUSEOF THE CLAIM, DEMAND OR ACTION AL-LEGING ANY LOSS, INJURY OR DAMAGES,DIRECT OR INDIRECT, WHICH MAY RESULTFROM THE USE OR POSSESSION OF THEINFORMATION; OR FOR ANY LOSS OFPROFIT, REVENUE, CONTRACTS ORSAVINGS, OR ANY OTHER DIRECT,INDIRECT, INCIDENTAL, SPECIAL OR CON-SEQUENTIAL DAMAGES ARISING OUT OFYOUR USE OF OR INABILITY TO USE THISINFORMATION, ANY DEFECT IN THEINFORMATION, OR THE BREACH OF THESETERMS OR CONDITIONS, WHETHER IN ANACTION IN CONTRACT OR TORT OR BASEDON A WARRANTY, EVEN IF NISSAN OR ITSLICENSORS (OR THEIR LICENSORS ORSUPPLIERS) HAVE BEEN ADVISED OF THEPOSSIBILITY OF SUCH DAMAGES.

Some countries or local laws do not allow cer-tain liability exclusions or damages limitations, soto that extent the above may not apply to you.

Export control:

You agree not to export from anywhere any partof the Data provided to you or any direct productthereof except in compliance with, and with all li-censes and approvals required under, applicableexport laws, rules and regulations.

Entire Agreement:

These terms and conditions constitute the entireagreement between NISSAN (and its licensors,including their licensors and suppliers) and youpertaining to the subject matter hereof, and su-persedes in their entirety any and all written ororal agreements previously existing between uswith respect to such subject matter.

Map settings 3-15

3-16 Map settings

MEMO

4 Navigation

About route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2Voice guidance during route guidance . . . . . . . . . . . . 4-2

Navigation screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Available setting items . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Routing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Setting a destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6Available destination setting methods . . . . . . . . . . . . . 4-7

Setting a destination from a street address . . . . . . . . . . . 4-7Setting a destination from places . . . . . . . . . . . . . . . . . . . 4-11

Searching for nearby restaurants or gasstations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12Searching for places near current location. . . . . . . . 4-13Searching for places in another city. . . . . . . . . . . . . . 4-15Searching for places using VoiceRecognition (if so equipped) . . . . . . . . . . . . . . . . . . . . 4-17My Places/User-defined points of interest(POIs). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Setting a destination from the address book . . . . . . . . . 4-24Setting a new entry to the address book . . . . . . . . . 4-24

Setting an entry as a destination. . . . . . . . . . . . . . . . . 4-27Setting a destination from the address bookusing Voice Recognition (if so equipped) . . . . . . . . . 4-28

Setting a destination from POIs Powered byGoogle™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28Setting an intersection as a destination . . . . . . . . . . . . . 4-30Setting a city center as a destination. . . . . . . . . . . . . . . . 4-33Setting destination by map . . . . . . . . . . . . . . . . . . . . . . . . 4-34Traffic feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35

Displaying traffic events along route . . . . . . . . . . . . . 4-35Traffic icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37Traffic flow feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37Traffic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37

Weather feature (Type A) (United States only) . . . . . . . 4-39Displaying weather information on thescreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39

Weather feature (Type B) (Canada only). . . . . . . . . . . . . 4-41Displaying weather information on thescreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41

Flight information (if so equipped) (Canada only) . . . . . 4-43Fuel prices (if so equipped) (Canada only). . . . . . . . . . . 4-44

After setting the destination, select “Start” to be-gin route guidance.

During route guidance, the system navigates youthrough the guide points using visual and voiceguidance.

CAUTION● The navigation system visual and

voice guidance is for reference pur-poses only. The contents of the guid-ance may be inappropriate depend-ing on the situation.

● When driving along the suggestedroute, follow all traffic regulations(for example, one-way traffic).

“Route guidance”(page 6-2)

VOICE GUIDANCE DURING ROUTEGUIDANCE

When approaching a guide point (intersection orcorner), destination, etc., during route guidance,voice guidance announces the remaining dis-tance and/or turning direction.

Touch “Voice” on the upper left of the screen torepeat the voice guidance.

Example of voice guidance:

�1 “In about one quarter mile (400 meters), right(or left) turn.” “Right (or left) turn ahead.”

�2 “In about one quarter mile (400 meters)freeway entrance on your right onto (roadnumber and direction).” “Freeway entranceon your right onto (road number anddirection).”

�3 “In about one mile (1.6 kilometers), exit onyour right.” “Take the second exit on yourright.”

�4 “You have reached your destination. Endingroute guidance.”

LNV0943

ABOUT ROUTE GUIDANCE

4-2 Navigation

Several methods are available to set yourdestination.

BASIC OPERATION1. Press the NAV button.

2. Select the appropriate destination settingmethod by touching the screen or scrollingwith the scrolling dial.

AVAILABLE SETTING ITEMS● Destination:

Set and/or save a destination.

Several methods are available to set yourdestination.

“SETTING A DESTINATION”(page 4-6)

● Previous Destinations:

Searches for a destination from the previ-ous destinations in the destination memory.

Up to 50 previous destinations will be auto-matically stored. If the number of previousdestinations exceeds 50, the oldest one willbe removed from the list and the newestone will be added.

To manually delete a previous destinationentry, select an entry from the list and thentouch the “Delete” key. Touch “Delete All” todelete all previous destinations on the list.

Touch the “Save” key to add a previous des-tination to the address book.

Previous destinations can also be selectedusing the NISSAN Voice Recognition Sys-tem (if so equipped):

1. Press the or button on thesteering wheel. The system providesprompts and waits for voice commands.

2. Say “Navigation”.

3. Say “Previous”.

4. Speak the number of an entry on the dis-played list to choose that destination or say“Next Page” to view more entries (ifavailable).

LNV2047

NAVIGATION SCREEN

Navigation 4-3

If no route is set, route guidance is calcu-lated automatically. If a route is set, say “Re-place Destination” to use the chosen previ-ous destination in Step 4 as the newdestination. Say “Set as Waypoint” to addthe chosen previous destination as a way-point on the current route. Say “Show onMap” to show the chosen previous destina-tion on the map.

For more information about the NISSANVoice Recognition System, see the vehicleOwner’s Manual.

NOTE:

It is not possible to retrieve deleted previ-ous destination entries.

● Home:

Your home address can be entered as adestination.

Home can also be set as a destination using theNISSAN Voice Recognition System (if soequipped):



3. Say “Home”.

If a home location is set, route guidance to thehome location is calculated automatically.

For more information about the NISSAN VoiceRecognition System, see the vehicle Owner’sManual.

● Routing Options:

Changes the settings the system uses tocalculate the route.

“ROUTING OPTIONS”(page 4-5) ● Turn List:

Touch “Turn List” to display a list of all turnson the active route. Touch an entry to seemore detailed information about that entry.

LNV0945

4-4 Navigation

● Cancel Route:

Touch “Cancel Route” to cancel the routeguidance.

NOTE:

If route guidance is not active, both “Rout-ing Options” and “Cancel Route” cannotbe operated.

ROUTING OPTIONSThe settings the system uses to calculate theroute to a destination can be adjusted to suityour needs.

1. Press NAV.

2. Touch “Routing Options”.

3. Adjust the settings to the desired level.

● Dynamic Guidance:

Set to “OFF” to disable traffic info. Set to“Automatic” for traffic alerts to be controlledautomatically. Set to “Prompt” for trafficalerts to be displayed when prompted.

● Route Type:

Set to “Fastest” to calculate the fastestroute. Set to “Eco” to calculate the mosteconomical route. Set to “Shortest” to cal-culate the route of shortest distance.

● Minimize Freeways:

Toggle on or off to minimize the use of free-ways on a calculated route.

● Minimize Toll Roads:

Toggle on or off to minimize the use of tollroads on a calculated route.

● Minimize Ferries:

Toggle on or off to minimize the use of fer-ries on a calculated route.

LNV0946 LNV2059

Navigation 4-5

● Minimize Seasonal Roads:

Set to control the use of seasonal roads ona calculated route. Set to “Always”, “Never”or “When Closed”.

Several methods are available to set your desti-nation:

1. Press the NAV button.

2. Touch “Destination”.

The methods for setting a destination are shown.LNV2060 LNV2212 LNV2372

SETTING A DESTINATION

4-6 Navigation

If route guidance is active, you can choose howto use the new destination. Select “Add as Way-point” to keep the current destination and to addthe current destination as a waypoint along theroute. Select “Replace” to cancel the currentroute and replace the current destination withthe new destination.

AVAILABLE DESTINATION SETTINGMETHODS

● “Street Address”

“SETTING A DESTINATIONFROM A STREET ADDRESS”(page 4-7)

● “Places”

“SETTING A DESTINATIONFROM PLACES” (page 4-11)

● “My Places”

“MY PLACES/USER-DEFINEDPLACES” (page 4-18)

● “Address Book”

“SETTING A DESTINATIONFROM THE ADDRESS BOOK”(page 4-24)

● “POIs Powered by Google™”

“SETTING A DESTINATIONFROM POIs POWERED BYGOOGLE™” (page 4-28)

● “Intersection”

“SETTING AN INTERSECTIONAS A DESTINATION”(page 4-30)

● “City Center”

“SETTING A CITY CENTER ASA DESTINATION” (page 4-33)

● “Map”

“SETTING DESTINATION BYMAP” (page 4-34)



3. Touch “Street Address”.

4. If the state or province shown on the screenis correct, proceed to step 6. If the state orprovince shown on the screen is notcorrect, touch “Change State/Province”.

LNV2039 LNV2213

SETTING A DESTINATION FROM ASTREET ADDRESS

Navigation 4-7

5. Enter the name of the state or province. Thedisplay shows the touch keyboard.

“HOW TO INPUT CHARAC-TERS” (page 2-8)

The keyboard has an intelligent spellingsetting, so it excludes non-existingcombinations. On the top right of thescreen, the number of matches is shown.

6. Touch “Street”

NOTE:

It is possible to choose “City” at this step ifyou want to manually enter the city name.However, the system can automaticallynarrow down the city in most cases whenyou enter the street name first. Entering bystreet can also be useful if you are unsureof the city’s correct spelling.

7. The display shows a touch keyboard to en-ter the house number of the destination. Ifthe house number is not known, touch“Skip” and a default location on the streetwill be used.

“HOW TO INPUT CHARACTERS”(page 2-8)

NOTE:

If you choose “Skip”, a default location ischosen by the system and you will have achance to change the position once themap is displayed. See step 12 for more in-structions on changing the defaultlocation.

LNV2066 LNV2214 LNV2063

4-8 Navigation

8. The display shows a touch keyboard to en-ter the street name. Enter the name of thestreet. At any time, touch the “List” key todisplay a list of possible street names basedon the letters currently entered. When thenumber of matches is reduced to six or less,the street list will be shown automatically.


9. Touch the street name on the list. 10. If the street name you choose is found inonly one city in the state, the system will au-tomatically proceed to step 11. However, ifthe street name you choose is found in mul-tiple cities throughout the state (forexample, a common name such as MainStreet), you will need to choose the name ofthe city by touching it on the screen.

LNV2067 LNV0955 LNV0953

Navigation 4-9

If the list of cities is too large, you may be askedto spell the city name to narrow down the num-ber of matches.


11. If the house number entered in step 7 doesnot exist on the street in the chosen city,“The house number is not available” will bedisplayed. Select “Show Map” or “ChangeNumber”.

NOTE:

You will have a chance to change the posi-tion from the default location once themap is displayed. See step 12 for more in-structions on changing the defaultlocation.

12. A map of the destination is displayed on thescreen. Touch “Start” to calculate the route.

The map of the destination is always displayed in2D North Up. Once the “Start” key is touched,the system returns to the current map settings.

NOTE:

If you did not enter an exact street addressearlier in the process, the system will havechosen a default location, either along thestreet or within a range of addresses onthat street. To move the map from that de-fault position, touch the “Options” key. Amessage will be displayed asking if youwant to move or store the location.

Touch “Move” to display a map screen that al-lows you to touch a new location for thedestination. Touch “OK” when complete.

LNV2062 LNV0957 LNV2098

4-10 Navigation

Touch “Store” to store the location in the ad-dress book.

“SETTING A NEW ENTRY TO THEADDRESS BOOK” (page 4-24)

A destination can also be set from a street ad-dress using the NISSAN Voice Recognition Sys-tem (if so equipped):



3. Say “Street Address”.

4. When prompted, say the name of the stateor province. If the system cannot clearly in-terpret the name of the state or province, alist is provided with possible matches.Speak the number of the state or provincedisplayed on the screen or say “Spell State”to spell the name of the state.

5. When prompted, say the name of the city. Ifthe system cannot clearly interpret the nameof the city, a list is provided with possiblematches. Speak the number of the city dis-played on the screen or say “Spell City” tospell the name of the city.

6. When prompted, say the name of the street.If the system cannot clearly interpret thename of the street, a list is provided withpossible matches. Speak the number of thestreet displayed on the screen or say “SpellStreet” to spell the name of the street.

7. When prompted, say the house number orsay “No House Number” to display a defaultlocation on the chosen street within thechosen city. If the house number spoken isnot on the chosen street, the system will no-tify you that the number is out of range andto restate the number or say “No HouseNumber”.

If a route is active, say “Replace Destination” toreplace the current destination with the newstreet address or say “Set as Waypoint” to setthe new street address as a waypoint on the cur-rent route.

If a route is not set, say “Set as Destination” toset the new street address as the destinationand begin route guidance.

Say “Show on Map” to display the new street ad-dress on the map.


The system features a database of places suchas restaurants, hotels, banks and more to assistyou in navigation. These places can be set asdestinations and the system can then calculate aroute.

“MY PLACES/USER-DEFINEDPOINTS OF INTEREST (POIs)”(page 4-18)

SETTING A DESTINATION FROMPLACES

Navigation 4-11

SEARCHING FOR NEARBY RES-TAURANTS OR GAS STATIONSWhile a wide variety of places can be searchedin the system, shortcut buttons are available forrestaurants and gas stations.



3. Touch “Places”. 4. Touch “Nearby Restaurants” or “NearbyGas Stations”.

5. The system searches for destinations within50 miles (80 km) of the current position.

LNV2212 LNV2373 LNV2216

4-12 Navigation

6. Places are shown based on the straight linedistance to the current position. The arrowon the right shows the direction of thedestination. Touch the desired destinationon the list.

NOTE:

A maximum of 200 destinations will belisted when searching with this method.

7. A detailed description of the destination isprovided.

● Press the BACK or BACK button to goback and pick another destination.

● Touch “Store” to store the destination in theaddress book.

● Touch “Call” to call the destination (if a phonenumber is available) using the Bluetooth®Hands-Free Phone System. See the vehicleOwner’s Manual for more information aboutthe Bluetooth® Hands-Free Phone System.

● Touch “Map” to show a map of thedestination.

● Touch “Start” to calculate the route to thedestination.

SEARCHING FOR PLACES NEARCURRENT LOCATION



3. Touch “Places”.

4. Touch “Search by Category”.

LNV2052 LNV2050 LNV2053

Navigation 4-13

5. Touch “Places Near Current Location”.

6. Touch “By Category” or “By Name”.

7. If you choose “By Category”, you canbrowse destinations from a variety of cat-egories and subcategories, including:

● Automotive

● Banking & Business

● Emergency

● Hotel/Motel

● Leisure

● Public Places

● Restaurant

● Shopping

● Travel

If you choose “By Name”, you can search forplaces using a specific name. The touch key-board is shown.


NOTE:

● When searching “By Category”, the systemwill search for up to 200 matches within50 miles (80 km) of the current position.

● When searching “By Name”, the system willsearch for up to 30 matches within 50 miles(80 km) of the current position.

● If the destination is not found within the50 mile (80 km) search radius, you can searchfor places around a specific city name.

“SEARCHING FOR PLACES IN AN-OTHER CITY” (page 4-15)

8. Destinations are shown based on the dis-tance to the selected position. The arrow onthe right shows the direction of thedestination. The distance shown is astraight line distance.

Touch the desired destination from the list.

LNV2217 LNV2052

4-14 Navigation


Press the BACK or BACK button togo back and pick another destination ortouch “Start” to have the system calculatethe route to the destination.

SEARCHING FOR PLACES IN AN-OTHER CITY



3. Touch “Places”.

4. Touch “Search by Category” or “Search byName”.

5. Touch “Places in Another City”.

6. Touch “Change State/Province” if the stateor province shown is not correct.

LNV2050 LNV2053 LNV2213

Navigation 4-15

7. If necessary, enter the name of the state orprovince.

The display shows the touch keyboard.



8. Touch “City”.

9. A touch keyboard is displayed. Enter thename of the desired city.

Press “List” at any time to display a list of remain-ing cities. Touch the desired city.

10. If you chose “Search by Category” inStep 4, you can browse destinations from avariety of categories and subcategories, in-cluding:

● Automotive

● Banking & Business

● Emergency

● Hotel/Motel

● Leisure

● Public Places

● Restaurant

● Shopping

● Travel

LNV2066 LNV2062 LNV0953

4-16 Navigation

If you choose “Search by Name” in Step 4, youcan search for places using a specific name. Thetouch keyboard is shown.


NOTE:

● When searching “By Category”, the systemwill search for up to 200 matches within50 miles (80 km) of the chosen city.

● When searching “By Name”, the system willsearch for up to 30 matches within 50 miles(80 km) of the chosen city. If no matches arefound, touch “Change Name” to search foranother name or touch “Google®” to searchusing the Google® Places function.

“SETTING A GOOGLE® PLACESDESTINATION” (page 4-28)

11. Destinations are shown based on the dis-tance from the selected position. The arrowon the right shows the direction of thedestination. The distance shown is astraight line distance from the city center.

Touch the desired destination from the list.


Press the BACK or BACK button togo back and pick another destination ortouch “Start” to have the system calculatethe route to the destination.

SEARCHING FOR PLACES USINGVOICE RECOGNITION (if soequipped)

Places can be set as destinations using theNISSAN Voice Recognition System:



3. Say “Places”.

LNV2052 LNV2050

Navigation 4-17

4. Say the name of the type of place from theavailable list on the screen:

● Gas Stations

● Restaurants

● ATMs

● Parking

● Rest Areas

● Hotels

● Dealerships

● Airports

5. Say “Along Route” to search for the desiredplaces along the current route. Say“Nearby” to search for the desired placesclose to the vehicle’s current location. Say“Near Destination” to search for the desiredplaces near the route’s destination.

6. The system displays a list of results fittingthe search criteria. Say the number of thedesired entry on the list.





MY PLACES/USER-DEFINEDPOINTS OF INTEREST (POIs)A point of interest (POI) in the My Places data-base is a specific location of interest such as agas station or bank. The POI consists of a longi-tude value, a latitude value and a name.

Additional POIs can be added to the system us-ing the vehicle’s USB port. For more informationabout using the USB port, see your vehicle’sowner’s manual.

The POIs can be set as a destination or be setupto activate POI warnings that display a pop-upmessage when the vehicle approaches certainareas such as hazard spot warnings.

NOTE:

● In order to save the user-defined points of in-terest data, a USB mass storage device isrequired. The user-defined points of interestdata cannot be saved on the SD-card whichcontains the navigation data.

● User-defined points of interest are not shownin the map representation.

● The system recognizes the user-definedpoints of interest (POI) data and then asks theuser via a pop-up message if the data needsto be downloaded into the system.

● If you confirm the download, the available userPlaces in the system internal memory will bedeleted and the new ones in the USB massstorage device will be downloaded into the in-ternal memory of the system.

● The progress of the download is shown by aprogress-bar. When the download is finished,the user is notified that the USB mass storagedevice can be removed.

4-18 Navigation

Creating user-defined points of inter-est (POIs)

�1 Longitude

�2 Latitude

�3 Name

�4 Location/Folder to save

�5 File name

POI data can be downloaded from the Internetor created in a simple text editor in CSV (CommaSeparated Values) file format.

There are two kinds of POI data supported bythe system:

● User POIs – user-defined points of interest(POI) that can later be set as a destinationand found using route guidance.

● POI-warnings – user-supplied areas such ashazard spots that the system displays in apop-up window when the vehicle is ap-proaching the designated area.

Perform the following procedure to create yourown User POIs:

1. Connect a USB mass storage device toyour personal computer.

2. Use a standard software program to createa list of POIs. Make sure the software cansupport the CSV file format.

3. In the first column, enter the longitude valueof the position of the POI.

4. In the second column, enter the latitudevalue of the position of the POI.

5. In the third column, enter the name of thePOI. Information entered in the fourthcolumn, such as address or phone number,will be appended to the name of the POI.

6. Add more rows if necessary.

7. Save the file with the extension .csv (forexample, myplacesfile.csv).

NOTE:

The name of the .CSV file will be used tocreate a My Places category in the system.Create separate .CSV files with differentnames to create other My Placescategories.

LNV1017

Navigation 4-19

8. Make sure to select the USB mass storagedevice as the location to save, using the ex-act folder name “/myPOIs” for User POIs or“/myPOIs/myPOIwarnings”

for POI-warnings. For example, if the USBmass storage device’s root folder is repre-sented by f:/, save the file to the folder“f:/myPOIs” for User POIs or to the folder“f:/myPOIs/myPOIwarnings”

for POI-warnings.

9. Connect the USB mass storage device tothe vehicle’s USB port. For more informa-tion about the USB port, see your vehicle’sOwner’s Manual.

Adding user-defined points of interest(POIs)Perform the following procedure to add yourUser POIs to the system:



3. Touch “My Places”.

4. If a USB mass storage device with the newPOI data is connected, the system will auto-matically ask if you want to transfer the POIdata. Touch “Download” to begin the trans-fer or “Cancel” to cancel the procedure.

NOTE:

New POI data will overwrite POI data al-ready in the internal memory.

LNV2374 LNV1001

4-20 Navigation

5. The POI data on the USB mass storage de-vice is transferred to the vehicle.

NOTE:

A maximum of 8 MB of POI data can beadded to the system.

6. Once the download process is complete,the available POIs are displayed in a list onthe screen.

7. Touch the name of a POI on the list to set itas the destination.

8. Touch “Start” to calculate the route.LNV1002 LNV2057 LNV2098

Navigation 4-21

A user-defined POI in the My Places databasecan also be set as the destination by followingthe procedure below:



3. Touch “My Places”.

4. Touch “ MyPOI”.

5. Touch the name of the user-defined POI toset that entry as a destination.

Deleting user-defined points of inter-est (POIs)Perform the following procedure to delete theuser-defined POIs stored in the My Placesmemory:


2. Touch “Settings”.

3. Touch “Navigation”.

LNV2374 LNV2219 LNV2375

4-22 Navigation

4. Touch “My Places Settings” 5. Touch “Remove My Places From System”.

6. A pop-up is displayed to confirm that youwant to delete all User POIs (My Places)from the system. Touch “Yes” to delete theUser POIs or “No” to cancel.

Other options are available on the “My PlacesSettings” screen:

● My Places AlertSelect to adjust how alerts are provided whenapproaching a destination set by My Places.Choose “OFF” to disable the alert. Choose“Show Only” to display the alert on thescreen. Choose “Show & Beep” to display thealert on the screen and play an audible sound.

● Places Alert DistanceSelect to choose from the available list a dis-tance away from the My Places destination atwhich to activate the alert.

● Device InformationSelect to display the device information.

LNV2220 LNV2221 LNV2086

Navigation 4-23

This option allows you to set and store the des-tination in the address book and use the storeddestinations to calculate a route.

SETTING A NEW ENTRY TO THEADDRESS BOOK



3. Touch “Address Book”.

4. Touch “Add New Entry”.LNV2376 LNV2223

SETTING A DESTINATION FROM THEADDRESS BOOK

4-24 Navigation

There are four possibilities shown:

NOTE:

Up to 50 address book entries can bestored. If the number of address book en-tries exceeds 50, one must be deleted be-fore the new one can be added.

“SETTING AN ENTRY AS A DESTI-NATION” (page 4-27)

● “Street Address”

This option allows you to save a new entryby selecting the address.

“SETTING A DESTINATIONFROM A STREET ADDRESS”(page 4-7)

● “Previous Destination”

This option allows you to save a destinationin the address book from a location storedin the previous destination memory.

Touch the destination you would like to saveinto the address book.

The touch keyboard gives the option to changethe name of the selected destination.

Touch “OK”. The system confirms the entry andadds it to the address book.

LNV0961 LNV2046 LNV2065

Navigation 4-25

● “Current Destination”

This option allows you to store the currentlyset destination in the address book when aroute is active. This option is only availablewhen a route is active.

Touch “Current Destination”.

The touch keyboard gives the option to changethe name of the destination.


● “Current Position”

This option allows you to set the current po-sition as a destination in the address book.

Touch “Current Position”.

LNV0964 LNV2065 LNV0965

4-26 Navigation

The touch keyboard gives the option to changethe name of the destination.


SETTING AN ENTRY AS A DESTINA-TIONInstead of touching “Add New Entry”, you cantouch any previously saved address.

The detailed description of the entry is shown. Ifinformation for the destination is not available,latitude and longitude coordinates will be shown.

You can rename or delete the entry. From thiswindow, it is also possible to delete all entries inthe address book. Touch “OK” to set the entry asa destination.

NOTE:

Touch “Delete All” to delete the entire ad-dress book. A confirmation screen will bedisplayed to verify that you want to deletethe entire address book.

The system will calculate the route to the ad-dress chosen.

LNV2065 LNV2040 LNV2024

Navigation 4-27

SETTING A DESTINATION FROMTHE ADDRESS BOOK USINGVOICE RECOGNITION (if soequipped)Entries in the address book can be set as desti-nations using the NISSAN Voice RecognitionSystem:



3. Say “Address Book”.

4. Say the number of the entry in the addressbook displayed on the screen.

If a route is active, say “Replace Destination” toreplace the current destination with the addressbook entry or say “Set as Waypoint” to set ad-dress book entry as a waypoint on the currentroute.

If a route is not set, route guidance is calculatedto the address book entry.

Say “Show on Map” to display the location of theaddress book entry on the map.


NOTE:

Certain remote functions require compat-ible phone, not included with vehicle. Cel-lular network provided by independent cel-lular companies not within Nissan’scontrol. Cellular network not available inall areas. NissanConnect Google™ servicesrequire subscription and owner consent toactivate, subscription service for a periodof time is included in vehicle price, sub-scription available for purchase thereafter.Standard text rates, voice minutes, roam-ing charges and/or data usage may apply.

A destination can be entered using Google™search results. In order for this feature to beused, an account must first be registered fromthe Info Services settings screen.

“INFO SERVICES SETTINGS”(page 5-6)


2. Touch the “Destination” key.

LNV2212

SETTING A DESTINATION FROMPOIS POWERED BY GOOGLE™

4-28 Navigation

3. Touch the “POIs Powered by Google™” key.

NOTE:

The NISSAN Voice Recognition System (ifso equipped) can also be used to access

this feature. Press the or but-ton on the steering wheel, then whenprompted, say “Navigation” and “POIsPowered by Google™”. Manual controlsare then used to continue.

4. The display shows the touch keyboard. En-ter the search term.


5. A list of search results is displayed. Touchthe desired entry.


● Press the BACK or BACK button to goback and pick another destination.

● Touch “Store” to store the destination in theaddress book.

● Touch “Call” to call the destination (if a phonenumber is available) using the Bluetooth®Hands-Free Phone System. See the vehicleOwner’s Manual for more information aboutthe Bluetooth® Hands-Free Phone System.

● Touch “Map” to show a map of thedestination.

● Touch “Start” to calculate the route to thedestination.

LNV2377 LNV2064 LNV2050

Navigation 4-29

NOTE:

This feature can also be accessed bypressing the MENU button and selecting“POIs Powered by Google™” or “Google™Send-to-Car”.

Places can be set as destinations using theNISSAN Voice Recognition System (if soequipped):



3. Say “Places”.

4. Say the name of the type of place from theavailable list on the screen:

● Gas Stations

● Restaurants

● ATMs

● Parking

● Rest Areas

● Hotels

● Dealerships

● Airports

5. Say “Along Route” to search for the desiredplaces along the current route. Say“Nearby” to search for the desired placesclose to the vehicle’s current location. Say“Near Destination” to search for the desiredplaces near the route’s destination.

6. The system displays a list of results fittingthe search criteria. Say the number of thedesired entry on the list.





An intersection of two streets can be set as adestination. To set an intersection as the desti-nation:



3. Touch “Next Page”.

4. Touch “Intersection”.

LNV2225

SETTING AN INTERSECTION AS ADESTINATION

4-30 Navigation

5. Touch “Change State/Province” if the stateor province displayed is not correct.

6. If necessary, enter the name of the state orprovince.



7. Press “List” at any time and a list of remain-ing cities will be shown. Touch the desiredcity.

LNV2226 LNV2066 LNV0953

Navigation 4-31

8. Touch “Street”.



9. Touch the name of the desired street.

10. A list of intersecting streets will be shown ifsix or less exist. Otherwise, the touch key-board will be displayed again so that thename of the second street in the intersec-tion can be entered. Enter the second streetname.

11. Select the intersecting street.

12. Touch “Start”.

The route to the intersection will becalculated.

LNV2067 LNV0955 LNV2229

4-32 Navigation

The center of a city can be set as a destination.To set a city center as a destination:




4. Touch “City Center”.

5. If the state shown is not correct, touch“Change State or Province”. Otherwise,proceed to step 7.

6. Enter the name of the state or province. Thedisplay shows the touch keyboard.



7. Touch “City”

8. Enter the name of the first street. The dis-play shows the touch keyboard.

9. Touch “Start” to calculate the route to thecity center.

LNV2227 LNV2066 LNV2229

SETTING A CITY CENTER AS A DES-TINATION

Navigation 4-33

This method allows you to search for a destina-tion by scrolling the map, then have the systemcalculate a route to the destination or store theposition in the address book.




4. Touch “Map”.

The system is automatically set to the 2D, NorthUp setting.

5. Scroll the map and touch the screen at thepreferred location.

6. Touch the position data.

7. Touch “OK”.

Choose “Store” to store the location in the ad-dress book. The touch keyboard is displayed sothat a name for the entry can be stored.

Choose “Start” to calculate the route and beginroute guidance to the chosen location.

LNV2230 LNV2231 LNV2229

SETTING DESTINATION BY MAP

4-34 Navigation

The Navigation System receives traffic informa-tion from NavTraffic to inform you of traffic eventsand guide you to an alternate route. Trafficevents include accidents, road construction,heavy traffic and other factors that affect theroute ahead.

DISPLAYING TRAFFIC EVENTSALONG ROUTEWhen a route is active, press the MENU buttonand then touch “Traffic Information” to displaythe traffic event nearest the current vehiclelocation. The location and nature of the trafficevent is displayed on the screen. Three menuoptions are available on the screen.

NOTE:

This feature can also be accessed usingthe NISSAN Voice Recognition System (if

so equipped) by pressing the

or button on the steering wheel andwhen prompted, saying “Information” then“Traffic”.

● “On Route”

Touch the “On Route” key to display a list of alltraffic events that are present along the currentroute. Touch the line of a specific event on thescreen to see more details about that item.

LNV2111 LNV2106

TRAFFIC FEATURE

Navigation 4-35

● “All”

Touch the “All” key to display a list of all trafficevents in the area, including those which are notdirectly along the current route. Touch the line ofa specific event on the screen to see more de-tails about that item.

● “Avoid Rd.”

Touch the “Avoid Rd.” key to direct the naviga-tion system to avoid the area impacted by thelisted traffic event. The next screen lists twooptions.

Touch the “Avoid Road Ahead” key to avoid theroad listed on the traffic event. You can choosethe distance over which the system avoids theaffected road. Touch the “+” or “-” key to set thedistance and then touch “Recalculate Route” tocalculate the new route.

LNV2113 LNV2105 LNV2107

4-36 Navigation

Touch the “Avoid Segment of Route List” key toavoid a series of roads on the route list due to thetraffic event. The route list is displayed on thescreen. Touch the names of two streets on the listto avoid that portion of the route and then touch“Recalculate Route” to calculate the new route.

TRAFFIC ICONSThe following traffic icons are used:

: Accident

: Entrance/Exit Closed

: Incident

: Information

: Narrow Lanes

: Road Construction

: Traffic Jam

NOTE:

A black line is drawn over the road androute (if active) to indicate road construc-tion areas and length.

TRAFFIC FLOW FEATUREUsing information received from NavTraffic, thesystem informs you of traffic levels on certainhighways and roads in the area along the route.Press the MAP button to display the map of thecurrent vehicle location. Any roads with trafficflow information will appear colored as follows:

● Green: traffic is light and moving at normalspeeds. (>45 mph)

● Yellow: traffic is heavy and moving slowly.(10-45 mph)

● Red: traffic is gridlocked and not moving.(<10 mph)

TRAFFIC SETTINGSTo access the settings for the traffic feature:



LNV2106 LNV2378

Navigation 4-37

3. Touch the “Info” key. 4. Touch the “Traffic Settings” key. The following settings can be adjusted:

● Dynamic Guidance

● Show Traffic Incidents

● Show Traffic Flow

● Announce Traffic Alerts

LNV2233 LNV2234 LNV2072

4-38 Navigation

NavWeatherXM information is a subscriptionservice offered by SiriusXM Satellite Radio.

This service provides real-time information re-garding current weather and forecasts whereavailable. The weather information is broadcastto the vehicle by the SiriusXM satellites.

m WARNINGNavWeatherXM information is not asubstitute for attentive driving.Weather conditions change constantlyand emergency situations can arisewithout warning. Relying only onNavWeatherXM information could re-sult in serious personal injury.

XM NavWeather information is available in limitedmarkets. To subscribe to or check if this service isavailable in the area, call 1-866–635–2349 oraccess www.siriusxm.com/navweather.

DISPLAYING WEATHER INFORMA-TION ON THE SCREEN


2. Touch “Weather”.

The weather conditions for the current locationare displayed on the screen.

NOTE:

In some areas, the location name at thetop of the screen may not match the loca-tion shown for “Weather Station” due todifferences in where weather informationis collected.

Touch “Forecast” to see the weather forecast forthe selected area for the next five days.

LNV2379 LNV2250

WEATHER FEATURE (Type A) (UnitedStates only)

Navigation 4-39

Touch “Location” to view weather information fora different location:

● “Near Current Location”Select to view weather information for the cur-rent location.

● “Near Destination”Select to view weather information near thedestination of the current route. Route guid-ance must be active for this option to beavailable.

● “In Another City”Select to view weather information for a differ-ent city. Follow the on screen prompts andcharacter input screens to select the desiredlocation.

NOTE:

When the weather function is accessed forthe first time of the day, the GPS locationmay not be used. If this occurs, touch the“Location” key to update the location.

NOTE:



or button on the steering wheel andwhen prompted, saying “Information” then“Current Weather” or “Weather Forecast”.

LNV2249 LNV2251

4-40 Navigation

m WARNINGWeather information is not a substitutefor attentive driving. Weather condi-tions change constantly and emer-gency situations can arise withoutwarning. Relying only on weather infor-mation could result in serious personalinjury.

DISPLAYING WEATHER INFORMA-TION ON THE SCREEN


2. Touch “Weather”.

The weather conditions for the current locationare displayed on the screen.

Touch “Forecast” to see the weather forecast forthe selected area for the next five days.

LNV2380 LNV2259

WEATHER FEATURE (Type B)(Canada only)

Navigation 4-41

Touch “Location” to view weather information fora different location:

● “Near Current Location”Select to view weather information for the cur-rent location.

● “Near Destination”Select to view weather information near thedestination of the current route. Route guid-ance must be active for this option to beavailable.

● “In Another City”Select to view weather information for a differ-ent city. Follow the on screen prompts andcharacter input screens to select the desiredlocation.

NOTE:

When the weather function is accessed forthe first time of the day, the GPS locationmay not be used. If this occurs, touch the“Location” key to update the location.

NOTE:



or button on the steering wheel andwhen prompted, saying “Information” then“Current Weather” or “Weather Forecast”.

LNV2260 LNV2251

4-42 Navigation

To display flight information on the screen:



3. Touch “Flight Information”.

NOTE:



or button on the steering wheel andwhen prompted, saying “Information” then“Flight Information”.

4. Touch “Flight Number”.LNV2381 LNV2257 LNV2253

FLIGHT INFORMATION (if soequipped) (Canada only)

Navigation 4-43

5. Enter the flight number. The display showsthe touch keyboard.


6. Touch “Request Flight Information”. This keyis only active if a flight number has beenentered.

7. The flight information is displayed on thescreen.

When searching for flight information, the follow-ing criteria are available:

● DirectionTouch to select “Departure” or “Arrival”.

● Departure DayTouch to select “Today” or “Tomorrow”.

To display fuel prices at gas stations in the sur-rounding area on the screen:



LNV2254 LNV2252 LNV2381

FUEL PRICES (if so equipped)(Canada only)

4-44 Navigation

3. Touch “Fuel Prices”.

NOTE:



or button on the steering wheel andwhen prompted, saying “Information” then“Fuel Prices”.

4. A list of gas stations is displayed with thedistance and direction to each entry. Touchan entry on the screen to view informationabout that gas station.

5. The name, address and phone number ofthe gas station are displayed. If available,the prices for each grade of gasoline arealso displayed. Touch “Store” to store thelocation in the address book. Touch “Call”to call the location using the Bluetooth®Hands-Free Phone System. Touch “Map” toview the location on the map. Touch “Start”to begin route guidance to the location.

LNV2257 LNV2255 LNV2256

Navigation 4-45

4-46 Navigation

MEMO

5 Other settings

System settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Touchscreen click . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3System beeps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3Reset settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Clock settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Set clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5Language settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6Info services settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

The system can be customized according toyour preference.


2. Touch “Settings”.

3. Touch “System”. 4. Select the preferred setting item on thescreen and the next screen will be shown.You may need to use the scrolling dial or thetouch screen to scroll if more than onescreen of options is available.

The following settings are available:

● Display


● Clock Settings

“CLOCK SETTINGS” (page 5-4)

● Language

“LANGUAGE SETTINGS”(page 5-6)

LNV2378 LNV2236 LNV2087

SYSTEM SETTINGS

5-2 Other settings

● Touchscreen Click

“TOUCHSCREEN CLICK”(page 5-3)

● System Beeps

“SYSTEM BEEPS” (page 5-3)

● “Reset All Settings/Memory”

“RESET SETTINGS” (page 5-3)

5. Select the button of the preferred item andadjust the setting. Alternatively, use thescrolling dial or steering wheel scrollingswitch (if so equipped).

6. Press the BACK or BACK button toreturn to the previous screen or press theNAV button to return to the current locationmap screen.

TOUCHSCREEN CLICKUse this setting to change the audible confirma-tion between the on or off position when ascreen button is touched.

Select the “Touchscreen Click” key to toggle be-tween On and Off.

SYSTEM BEEPSUse this setting to change the audible confirma-tion when:

● a button on the unit is pressed and held for

about two seconds, such as the button.

● a pop-up message appears on the screen.

Select the “System Beeps” key to toggle be-tween ON and OFF.

RESET SETTINGSUse this setting to restore the factory defaultsettings.

Touch the “Reset All Settings/Memory” key andthen confirm the message. If you choose “Yes”,the system will reset the settings to the defaultsettings. If you choose “No”, the default settingswill not be restored and the display returns to thesystem settings screen.

DISPLAYSwitching the display on or off

This setting allows you to turn the display on oroff. When the display is turned off, the clock willstill be displayed.

To turn off the display, press the button.

The display will switch on when:

● the button is pressed.

● any other button is pressed.

● receiving incoming calls or during a phonecall. When the call is ended, the display re-turns to clock display.

Type A LNV2181

DISPLAY SETTINGS

Other settings 5-3

Voice guidance (if active) continues even whenthe display is turned off.

Press and hold the button for more thantwo seconds to switch the display to a larger dis-play of the digital clock.

Changing day-night brightness

Press the button for less than two sec-onds to toggle:

● between day and auto (night) when head-lights are on.

● between night and auto (day) when head-lights are off.

While the display is showing the current bright-ness mode, turn the TUNE/SCROLL dial to ad-just the brightness.

The day or night mode can also be toggled fromthe Display Settings menu.

BRIGHTNESSThis menu allows you to adjust the brightness ofthe screen.



3. Touch the “System” key.

4. Touch the “Display” key.

5. Touch the “Brightness” key repeatedly.Each time the key is touched the brightnessmode will change as follows:

Very Bright → Bright → Default → Dark →Very Dark → Very Bright

6. To save the setting, press the BACK

or BACK button to return to the pre-vious screen.

This setting allows you to make clockadjustments.




4. Touch the “Clock Settings” key.

5. Select the preferred setting item and makean adjustment.

● “Time Format”:

Touch the “Time Format” key to change theclock format between 12-hour and 24-hour.

● “Date Format”:

Touch the “Date Format” key to choose oneof five available date formats.

Type B LNV2398 LNV2092 LNV2088

CLOCK SETTINGS

5-4 Other settings

● “Clock Mode”:

Select “Manual” to manually set the clockwith the “Set Clock Manually” key. Select“Auto” to have the clock automatically ad-justed by the GPS system. Select “TimeZone” to have the time set to a specific timezone.

● “Set Clock Manually”:

Allows you to set the clock manually. Thisfeature is only available if “Manual” is se-lected for “Clock Mode”.

“SET CLOCK” (page 5-5)

● “Daylight Savings Time”:

Touch the “Daylight Savings Time” key totoggle daylight savings time on or off. Thisfeature is unavailable if “Clock Mode” is setto “Auto”.

● “Time Zone”:

Select and touch an appropriate time zoneof the current vehicle location to bypass theGPS satellite. This feature is only available if“Time Zone” is selected for “Clock Mode”.

NOTE:

If “Daylight Savings Time” is set to “ON”and a time zone is chosen for an area thatdoes not observe Daylight Savings Time,the “Daylight Savings Time” setting re-mains “On” and must be turned offmanually.

6. After adjusting the desired settings, press

the BACK or BACK button to returnto the previous screen. You can also pressthe NAV button to return to the current loca-tion map screen or the FM, AM, CD or AUXbutton to return to the audio screen.

SET CLOCKAdjust the hour, minute, day, month and year us-ing the “+” and “–” keys.

LNV2089 LNV2090

Other settings 5-5

This setting allows you to change the languageused by the system.




4. Touch the “Language” key.

5. Select the appropriate language. The avail-able languages are:

– English

– Français

– Español

6. The program loading screen is displayed.Upon completion, the start-up screen is au-tomatically displayed.

NOTE:

Certain remote functions require compat-ible phone, not included with vehicle. Cel-lular network provided by independent cel-lular companies not within Nissan’scontrol. Cellular network not available inall areas. NissanConnect Google™ servicesrequire subscription and owner consent toactivate, subscription service for a periodof time is included in vehicle price, sub-scription available for purchase thereafter.Standard text rates, voice minutes, roam-ing charges and/or data usage may apply.



3. Touch the “Info” key.

LNV2378

LANGUAGE SETTINGS INFO SERVICES SETTINGS

5-6 Other settings

● Traffic Settings

“ TRAFFIC SETTINGS”(page 4-37)

● Confirm Dial InSelect to control the confirmation of dialin for info services. Available options are“Always”, “Never” and “Once”.

● Register for Connected ServicesSelect to register for connected services. Youwill be prompted to enter your User ID andpassword. This step must be performed be-fore any Google® services, flight information(if so equipped) or gas prices (if so equipped)are accessible. This feature requires aBluetooth® phone to be connected to thevehicle. See the vehicle Owner’s Manual formore information about the Bluetooth®Hands-Free Phone System.

NOTE:

In order to access info services, an activesubscription for connected services isrequired. Contact a NISSAN dealer formore information.

LNV2068 LNV2069 LNV2096

Other settings 5-7

● Select Country for ServiceSelect to choose the appropriate country forservice.

NOTE:

Make sure that the correct country for ser-vice is selected after driving across a bor-der to avoid international dialing charges.

● Entries to DownloadSelect to adjust the number of entries todownload when info services are requested.By default, the system displays six entries. Thenumber of entries can be set between 1 and20.

● Temperate UnitSelect to toggle between degrees Fahrenheitand Celsius.

● Distance UnitsSelect to toggle between miles andkilometers.

LNV2070

5-8 Other settings

6 General system information

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2Features of this navigation system . . . . . . . . . . . . . . . . . . . 6-2

Route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2Places directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2Address book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3NavTraffic information . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Voice guidance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Current vehicle location . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4Display of current vehicle location . . . . . . . . . . . . . . . . 6-4What is GPS (Global Positioning System)?. . . . . . . . 6-4Detailed map coverage (MCA) for thenavigation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

When a gray road is displayed on the map . . . . . . . . 6-4Route calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4Route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Basics of voice guidance . . . . . . . . . . . . . . . . . . . . . . . . 6-6Directions provided and the distances toguide points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6Repeating voice guidance . . . . . . . . . . . . . . . . . . . . . . . 6-6Notes on voice guidance . . . . . . . . . . . . . . . . . . . . . . . . 6-6

How to handle the display . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7Characteristics of a liquid crystal display . . . . . . . . . . 6-7Maintenance of the display . . . . . . . . . . . . . . . . . . . . . . 6-8

This system is primarily designed to help youreach your destination, and it performs otherfunctions as outlined in this manual. However thedriver must use the system safely and properly.Information concerning road conditions, trafficsigns and the availability of services may not al-ways be up-to-date. The system is not a substi-tute for safe, proper and legal driving.

Before using the navigation system, please readthe following safety information. Always use thesystem as outlined in this manual.

m WARNING● When the driver wants to operate the

navigation system, first park the ve-hicle in a safe location and set theparking brake. Operating the systemwhile driving can distract the driverand may result in a serious accident.

● Do not rely on route guidance alone.Always be sure that all driving ma-neuvers are legal and safe in order toavoid accidents.

● Do not disassemble or modify thissystem. If you do, it may result inaccidents, fire or electrical shock.

● Do not use this system if you noticeany malfunctions such as a frozenscreen or lack of sound. Continueduse of the system may result inaccidents, fire or electrical shock.

● If you notice any foreign objects inthe system hardware, spill liquid onthe system or notice smoke or asmell, stop using the system immedi-ately and contact a NISSAN dealer.Ignoring such conditions may lead toaccidents, fire or electrical shock.

CAUTION● Some states or provinces may have

laws limiting the use of videoscreens while driving. Use this sys-tem only where it is legal to do so.

NOTE:

Do not keep the navigation system runningwith the engine stopped. Doing so maydischarge the vehicle battery. When youuse the navigation system, always keepthe engine running.

ROUTE GUIDANCE

The main features of the NISSAN NavigationSystem are visual guidance and voice guidancein selected map coverage areas. Utilizing a net-work of GPS (Global Positioning System)satellites, the NISSAN Navigation System tracksthe location on the map and navigates to a pre-ferred location.

Once you set the destination in a map coveragearea, the NISSAN Navigation System will calcu-late a route from your current location to yourdestination. The real-time map display and turn-by-turn voice guidance leads the driver along theroute. These features can be especially helpfulwhen driving to unfamiliar locations.

The system may be unable to set a destinationand/or calculate a route when the destination isoutside the map coverage area. Additionally,voice guidance may not be available if the desti-nation is outside the map coverage area. Formore information on how to set a destination, re-fer to Section 4.

PLACES DIRECTORYThe NISSAN Navigation System offers an exten-sive Places directory in map coverage areas.This directory includes a wide variety ofdestinations. By accessing the Places directory,you can search for addresses for a destination,

SAFETY INFORMATION FEATURES OF THIS NAVIGATIONSYSTEM

6-2 General system information

and just by pushing a button, the NISSAN Navi-gation System will calculate a route to thedestination.

The Places directory has many uses. Forexample, the directory can be sorted by the vari-ous types of restaurants near your currentlocation. If you need a bank or a gas station, theNISSAN Navigation System can navigate you tothe closest preferred location using the Placesentered in the system.

“SETTING A DESTINATION FROMPLACES” (page 4-11)

ADDRESS BOOKThe address book can store up to 50 locationsfrom map coverage areas into a personaldirectory. This is especially useful for frequentlyvisited locations, such as clients, relatives andfriends. The address book function allows easyaccess to frequently visited locations when set-ting them as your destination.

“SETTING A DESTINATION FROMTHE ADDRESS BOOK” (page 4-24)

NAVTRAFFIC INFORMATIONWhen available, the NavTraffic Informationbroadcast may help to avoid delays due to trafficincidents. Traffic jams, roadwork, closed roadsaround the current location, etc. are representedgraphically on the map by icons depicting thenature of the event. Incidents on the route areautomatically displayed when they areapproached.

The NavTraffic Information feature, via the guid-ance mode, may help to detour around trafficproblems. For more information on the NavTrafficInformation feature, refer to section 4.

VOICE GUIDANCERoute guidance is provided through voice andvisual instructions. Voice guidance announcesthe appropriate directions when approaching anintersection at which you need to turn. To repeatthe voice guidance, touch the “Voice” key.

The voice guidance can be alternately enabledor disabled by touching and holding the “Voice”key on the screen for about two seconds. Whenthe voice guidance is disabled, the “Voice” keyon the screen will appear grayed out.

LNV2026

General system information 6-3

DISPLAY OF CURRENT VEHICLELOCATION

This navigation system combines the data ob-tained from the vehicle (by gyro sensor) and fromGPS (Global Positioning System) satellites tocalculate the current location of the vehicle. Thisposition is then displayed throughout route guid-ance to a destination.

WHAT IS GPS (Global PositioningSystem)?

GPS is a position detecting system that usessatellites deployed by the U.S. government. Thisnavigation system receives radio signals fromthree or more different satellites that orbit13,049 miles (21,000 km) above the earth inspace, and detects the position of the vehicle byutilizing the principle of triangulation.

DETAILED MAP COVERAGE (MCA)FOR THE NAVIGATION SYSTEMThis system is designed to help you reach yourdestination, and also performs other functions asoutlined in this manual. However, you, the driver,must use the system safely and properly. Infor-mation concerning road conditions, traffic signsand the availability of services may not always beup-to-date. The system is not a substitute forsafe, proper, and legal driving.

Map data is available on the provided SD-card.For information about the map SD-card, contacta NISSAN dealer or call the NISSAN NAVIGA-TION SYSTEM HELPDESK. See the contact in-formation on the inside front cover of thismanual.

Map data includes 2 types of areas: “Detailedcoverage areas” providing all detailed road dataand other areas showing “Main roads only”.

NOTE:

Detailed map data is not available in manyareas and is generally limited to select ma-jor metropolitan areas.

WHEN A GRAY ROAD IS DIS-PLAYED ON THE MAP● Route calculation may not be possible when a

destination or the current vehicle location isnear a gray road.

● Route guidance (enlarged view and voiceguidance) may not be available at the inter-section where the road your vehicle is drivingon and a gray road intersect.

● Places information and street names neargray roads are not contained in the map data.

● The NISSAN Navigation System may not cal-culate a route if the current vehicle location istoo far away from the destination. In this case,please divide your trip by selecting one or twointermediate destinations.

● To reach your destination, refer to the mapscreen. Always follow actual roads and regu-lations and drive safely.

● The suggested route may not be the shortest,nor are other circumstances such as trafficjams considered unless the NavTraffic isactive.

● Because of the inevitable difference in roadconditions and circumstances between thetime you use this system and the time the in-formation was produced for the map data,there may be discrepancies in roads andregulations. In such cases, follow the actualinformation available.

● During route calculation, the map will notscroll, however the vehicle icon will move withthe actual vehicle’s movement.

● In some cases, after the calculation iscomplete, the calculated route may not be im-mediately displayed.

● If you scroll the map while the suggestedroute is being drawn, it may take more time tofinish drawing.

CURRENT VEHICLE LOCATION ROUTE CALCULATION


● If waypoints are set, the system calculatesmultiple routes between waypointssimultaneously, and the following may result.

– If one section between waypoints cannotbe calculated, none of the route will bedisplayed.

– The route may not connect completely atsome waypoints.

– The route may require a U-turn close tosome waypoints.

● Route calculation may not be completed inthe following cases.

– If there is no main road within a range of1.5 miles (2.5 km) from the vehicle, amessage will then appear on the screen.Try recalculating when the vehicle iscloser to a main road.

– If the vehicle is too close to the destina-tion or if there are no roads to thedestination, a message will then appearon the screen.

– If it is impossible to reach the destinationor waypoints because of trafficregulations, etc.

– If the only target route to the destinationor waypoints is extremely complicated.

● The following may occur when the route isdisplayed.

– If you calculate a route on a main road,the starting point of the route may not ex-actly match the current vehicle location.

– The endpoint of the route may not exactlymatch the destination.

– If you calculate a route on a main road,the system may display a route from an-other main road. This may be becausethe position of the vehicle icon is notaccurate. In this case, park the vehicle ina safe location and reset the vehicle icon,or continue driving to see if the positionof the vehicle icon is automatically ad-justed before recalculating the route.

“VEHICLE ICON” (page 7-3)

– In some cases, the system shows an in-direct route to the destination or way-points if you set them from stored orplaces information. In order to correct,you must be careful about the trafficdirection, especially when lanes with dif-ferent travel directions are shownseparately, such as interchanges andservice areas.

– Even if the freeway preference is set toOFF, a route that uses the freeway maybe suggested.

– Even if the preference is set to OFF, aroute that uses a ferry line may besuggested.

– Ferry lines, excluding those that are onlyfor pedestrians, bicycles andmotorcycles, are stored in this system.Take into consideration the travel time re-quired and operational condition beforedeciding whether to use the route.


BASICS OF VOICE GUIDANCEThe voice guidance announces which directionto follow when approaching an intersectionwhere a turn is required.

After setting the route, select “Start” to beginroute guidance.

During route guidance, the system navigates youthrough the guide points using visual and voiceguidance.

NOTE:

● The navigation system visual and voice guid-ance is for reference purposes only. The con-tents of the guidance may be inappropriatedepending on the situation.

● There may be some cases in which voiceguidance and actual road conditions do notcorrespond. This may occur because of dis-crepancies between the actual road and theinformation on the map data, or due to the ve-hicle’s speed.

● In case voice guidance does not correspondto the actual road conditions, follow the infor-mation obtained from traffic signs or noticedon the road.

● Route guidance provided by the navigationsystem does not take carpool lane driving intoconsideration, especially when carpool lanesare separated from other road lanes.

DIRECTIONS PROVIDED AND THEDISTANCES TO GUIDE POINTSDirections will differ, depending on the roadtype.

INFO:

Distances may vary, depending on the vehiclespeed.

Notification when approaching thedestinationOrdinary road:

The voice guidance will warn you when ap-proaching your destination. To reach your desti-nation precisely, refer to the map screen.

REPEATING VOICE GUIDANCEThis function is available throughout routeguidance, from the time after the route calcula-tion is completed until the vehicle arrives at thedestination.

Touch the “Voice” key.

Voice guidance will be repeated.

INFO:

● If you touch the “Voice” key when you havedeviated from the suggested route, voiceguidance will announce, “Proceed to thehighlighted route.”

● If you touch the “Voice” key when you are go-ing in the wrong direction, voice guidance willannounce: “Please make a legal U-turn ifpossible.”

NOTES ON VOICE GUIDANCE● Voice guidance in this system should be re-

garded as a supplementary function. Whendriving your vehicle, check the route on themap and follow the actual roads and trafficregulations.

● Voice guidance is activated only for intersec-tions with certain conditions.

● There may be cases where the vehicle has toturn, but voice guidance is not provided.

● Voice guidance contents may vary, dependingon the direction of the turn and the type ofintersection.

● The voice guidance timing will vary dependingon the situation.

ROUTE GUIDANCE


● When the vehicle has deviated from the sug-gested route, voice guidance is not available.The system will not announce this to you. Re-fer to the map and recalculate the route.

● Voice guidance may not accurately corre-spond with road numbers and directions atfreeway junctions.

● Voice guidance may not accurately corre-spond to street names at freeway exits.

● The displayed street names may sometimesdiffer from the actual names, or “UNKNOWNSTREET NAME” may be displayed.

● Voice guidance is not available when the fea-ture is disabled in the SETUP menu.

● Voice guidance will start when the vehicle en-ters the suggested route. Refer to the map fordirections to the starting point of the route.

● When approaching a waypoint, voice guid-ance will announce, “You have reached yourintermediate destination on the (left/right)side.” Voice guidance will switch to the nextsection of the route. When voice guidance isnot available, refer to the map for directions.

● In some cases, voice guidance ends beforearrival at the destination. Refer to the destina-tion icon on the map to reach the destination.

● If the system recognizes on which side thedestination (waypoint) is located, voice guid-ance will announce “on the right/left” after an-nouncing the arrival at the destination.

● Voice guidance may be partially operational orinoperative due to the angle of roads at anintersection.

● Because it is not possible to consider dataconcerning roads that are seasonally availableor unavailable, a route may be displayed thatdoes not match the actual traffic restrictions.Be sure to follow the actual traffic restrictionswhile driving.

● Canada and Alaska contain many roads withincomplete map data. As a result, whensearching for a route, the route may includeroads with incomplete data. In regions whereroad data is not complete, voice guidancemay stop for long periods of time. Be sure tofollow the actual traffic restrictions whiledriving.

The display is a liquid crystal display and shouldbe handled with care.

m WARNINGNever disassemble the display. Someparts utilize extremely high voltage.Touching them may result in seriouspersonal injury.

CHARACTERISTICS OF A LIQUIDCRYSTAL DISPLAY● If the temperature inside the vehicle is espe-

cially low, the display will stay relatively dim orthe movement of the images may be slow.These conditions are normal. The display willfunction normally when the interior of the ve-hicle has warmed up.

● Some pixels in the display are darker orbrighter than others. This condition is an in-herent characteristic of liquid crystal displays,and it is not a malfunction.

● A remnant of the previous display image mayremain on the screen. This screen burn is in-herent in displays, and it is not a malfunction.

INFO:

The screen may become distorted by strongmagnetic fields.

HOW TO HANDLE THE DISPLAY


MAINTENANCE OF THE DISPLAY

CAUTION● To clean the display, never use a

rough cloth, alcohol, benzine,thinner, any kind of solvent, or papertissues with chemical cleaningagent. They would scratch or deterio-rate the panel.

● Do not splash any liquid such as wa-ter or car fragrance on the display.Contact with liquid will cause thesystem to malfunction and damagethe hardware.

For cleaning, use a dry soft cloth. If additionalcleaning is necessary, use a small amount ofneutral detergent with a soft cloth. Never spraythe screen with water or detergent. Dampen thecloth first, then wipe the screen.


7 Troubleshooting guide

Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2Vehicle icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3

Map SD-card route calculation and visual guidance . . . 7-5Voice guidance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

Symptom Possible cause Possible solution

No image is displayed. The brightness is at the lowest setting. Adjust the brightness of the display.

The display is turned off. Press the button to turn on the display.

The system is in overheat mode due to excessivehigh temperature.

Wait until the system cools down.

No voice guidance is available.orThe volume is too high or too low.

The volume is not set correctly, or it is turned off. Adjust the volume of voice guidance or turn voice guidance on.

No map is displayed on the screen. The map SD-card is not inserted. Insert the map SD-card correctly.

A screen other than map screen is displayed. Press MAP.

The screen is too dim. The movement is slow. The temperature in the interior of the vehicle is low. Wait until the interior of the vehicle has warmed up.

Some pixels in the display are darker orbrighter than others.

This condition is an inherent characteristic of liquidcrystal displays.

This is not a malfunction.

Some menu items cannot be selected. Some menu items become unavailable while thevehicle is driven.

Park the vehicle in a safe location, and then operate the navigation system.

NOTE:

Locations stored in the Address Book and other memory functions may be lost if the vehicle’s battery is disconnected or is discharged.If this occurs, service the vehicle’s battery as necessary and re-enter the information in the Address Book.

BASIC OPERATIONS

7-2 Troubleshooting guide


Names of roads and locations differ between 2Dand 3D mode.

This is because the quantity of the displayed information isreduced so that the screen does not become difficult to read.There is also a chance that names of the roads or locationsmay be displayed several times, and the names appearing onthe screen may be different because of a processingprocedure.


The vehicle icon is not displayed in the correctposition.

The vehicle was transported after the ignition switch wasturned off by a ferry or car transporter, for example.

Drive the vehicle for a while on a road where GPS signals canbe received.

The position and direction of the vehicle icon may be incor-rect depending on the driving environments and the levels ofpositioning accuracy of the navigation system.

This is not a malfunction. Drive the vehicle for a while to auto-matically correct the position and direction of the vehicle icon.

“CURRENT VEHICLE LOCATION” (page 6-4)

When the vehicle is traveling on a new road, thevehicle icon is located on another road nearby.

The system automatically places the vehicle icon on the near-est available road, because the new road is not stored in themap data.

Updated road information will be included in the next version ofthe map SD-card.

The map does not scroll even when the vehicle ismoving.

The current location map screen is not displayed. Press the MAP button.

The vehicle icon is not displayed. The current location map screen is not displayed. Press the MAP button.

The GPS indicator on the screen remains gray. GPS signals cannot be received under certain conditions,such as in a parking garage, on a road with many tallbuildings, etc.

Drive on an open, straight road for a while.

A sufficient number of GPS satellites is not available. Wait for the satellites to move to locations available for the navi-gation system.

VEHICLE ICON

Troubleshooting guide 7-3


The location of the vehicle icon is misaligned fromthe actual position.

When using tire chains or replacing the tires, speed calcula-tions based on the speed sensor may be incorrect.

Drive the vehicle for a while (at approximately 19 MPH [30 km/h]for about 30 minutes) to automatically correct the vehicle iconposition. If this does not correct the vehicle icon position, con-tact a NISSAN dealer.

The map data has a mistake or is incomplete (the vehicleicon position is always misaligned in the same area).

Updated road information will be included in the next version ofthe map data.



The message “Error” appears. The SD-card is not recognized by the system. Replace the map SD-card if you see any damage.

In the automatic reroute calculation, the waypoint is notincluded.

A waypoint that you have already passed is not included in the auto-matic reroute calculation.

If you want to go to that waypoint again, you need toadd it back to the route.

Route information is not displayed. Route calculation has not yet been performed. Set the destination and perform route calculation.

The vehicle is not on the suggested route. Drive on the suggested route.

Route guidance is cancelled. Turn on route guidance.

The automatic reroute calculation (or detour calculation)suggests the same route as the one previouslysuggested.

Route calculations took priority conditions into consideration, butthe same route was calculated.


The suggested route is not displayed. Roads near the destination cannot be calculated. Reset the destination to a main or ordinary road, andrecalculate the route.

The starting point and destination are too close. Set a more distant destination.

The starting point and destination are too far away. Divide the trip by selecting one or two intermediatedestinations, and perform route calculations multipletimes.

An indirect route is suggested. If there are restrictions (such as one-way streets) on roads close tothe starting point or destination, the system may suggest an indirectroute.

Adjust the location of the starting point ordestination.

The system may suggest an indirect route because route calculationdoes not take into consideration some areas such as narrow streets(gray roads).

Reset the destination to a main or ordinary road, andrecalculate the route.

The landmark information does not correspond to theactual information.

This may be caused by insufficient or incorrect data on the mapSD-card.

Updated information will be included in the next ver-sion of the map SD-card.

The suggested route does not exactly connect to thestarting point or destination.

There is no data for route calculation closer to these locations. Set the starting point and destination on a main road,and perform route calculation.

MAP SD-CARD ROUTE CALCULATIONAND VISUAL GUIDANCE

Troubleshooting guide 7-5


Voice guidance is not available. In some cases, voice guidance is not available even when thevehicle should make a turn.


The vehicle has deviated from the suggested route. Go back to the suggested route or request route calculationagain.

Voice guidance is set to off. Turn on voice guidance.

The guidance content does not correspond to theactual condition.

The content of voice guidance may vary, depending on thetypes of intersections at which turns are made.

Follow all traffic rules and regulations.

VOICE GUIDANCE


8 Index

A

Address book. . . . . . . . . . . . . . . . . . .6-3

B

Basic operations . . . . . . . . . . . . . . . . .7-2Basics of voice guidance . . . . . . . . . . . .6-6

C

Clock settings . . . . . . . . . . . . . . . . . .5-4Control buttons and functions . . . . . . . . . .2-2Current vehicle location . . . . . . . . . . . . .6-4

D

Directions provided and the distances to guidepoints . . . . . . . . . . . . . . . . . . . . . . .6-6Display of current vehicle location. . . . . . . .6-4Display settings. . . . . . . . . . . . . . . . . .5-3

F

Features of this navigation system . . . . . . .6-2For safe operation . . . . . . . . . . . . . . . .1-2Functions disabled while driving . . . . . . . .2-6

H

How to use this manual . . . . . . . . . . . . .1-2

L

Language settings . . . . . . . . . . . . . . . .5-6Laser product . . . . . . . . . . . . . . . . . . .1-3

M

Moving a map. . . . . . . . . . . . . . . . . . .3-4My Places . . . . . . . . . . . . . . . . . . . .4-18

N

Notes on voice guidance . . . . . . . . . . . .6-6

P

Points Of Interest (POI) directory . . . . . . . .6-2

R

Reference symbols . . . . . . . . . . . . . . . .1-2Repeating voice guidance . . . . . . . . . . . .6-6Returning to the current vehicle location . . . .3-4Route calculation . . . . . . . . . . . . . . . . .6-4Route calculation and visual guidance . . . . .7-5

Route guidance. . . . . . . . . . . . . . . . . .6-2

S

Safety information . . . . . . . . . . . . . . . .1-2Steering wheel switch. . . . . . . . .2-4, 2-5, 2-4

U

User-defined points of interest (POIs). . . . .4-18

V

Vehicle icon . . . . . . . . . . . . . . . . . . . .7-3Voice guidance . . . . . . . . . . . . . . .6-3, 7-6Voice recognition . .4-11, 4-28, 4-30, 4-37, 4-5,

4-17, 4-41, 4-43, 4-44, 5-2

W

What is GPS (Global Positioning System)? . .6-4When a gray road is displayed on the map. . .6-4

X

XM NavWeather™ . . . . .4-39, 4-41, 4-39, 4-41

®

For your safety, read carefully and keep in this vehicle.

20

13

NIS

SA

N N

AV

IGATIO

N S

YS

TE

MLC

2

Printing : December 2012 (04)

Publication No.:

Printed in U.S.A. LC2

2013 NAVIGATIONSYSTEM

OWNER’S MANUAL

N13E LC2UX1

2013 NAVIGATION SYSTEM - Nissan USA S MANUAL N13E LC2UX1 NISSAN NAVIGATION SYSTEM HELP-DESK CONTACT...

Documents

Transcript of 2013 NAVIGATION SYSTEM - Nissan USA S MANUAL N13E LC2UX1 NISSAN NAVIGATION SYSTEM HELP-DESK CONTACT...