2012 Toyota Highlander Audio/Video Information

SECTION 6

AUDIO/VIDEO SYSTEM

145

AUDIO/VIDEO SYSTEM

� Quick reference 146

� Using your audio/video system 147

Some basics 147. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Radio operation 155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Radio operation (XM Satellite Radio broadcast) 160. . . . . . . . . CD changer operation 166. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bluetooth audio operation 178. . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD player operation 187. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB memory/iPod operation 211. . . . . . . . . . . . . . . . . . . . . . . . . .

� Audio/video remote controls (steering switches) 218

� Rear seat entertainment system features 221

Using the DVD player (DVD video) 226. . . . . . . . . . . . . . . . . . . . Using the DVD player (video CD) 232. . . . . . . . . . . . . . . . . . . . . . Using the DVD player (audio CD/CD text) 234. . . . . . . . . . . . . . Using the DVD player (MP3 discs) 235. . . . . . . . . . . . . . . . . . . . . Using the video mode 236. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the initial setting 237. . . . . . . . . . . . . . . . . . . . . . . . . . . Replacing the batteries 241. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

� Audio/video system operating hints 242

jrubino

Stamp

AUDIO/VIDEO SYSTEM

146

Operations such as selecting a preset station and adjusting the sound balance are car-ried out on the touch screen. To display the audio screen, push the “TUNE/FILE”/“AU-DIO” knob.

1 Function menu display screenTo control the radio, CD changer,DVD player*, Bluetooth� audio play-er, AUX or USB memory/iPod, touchthe touch−screen buttons. For de-tails, see page 150.

2 Function menu tabTo control the radio, CD changer,DVD player*, Bluetooth� audio play-er, AUX or USB memory/iPod, touchthe touch−screen tabs. For details,see page 149.

*: Vehicles with rear seat entertainmentsystem

3 “SEEK/TRACK” buttonPush either side of this button to seekup or down for a station, or to accessa desired track, file or chapter. Fordetails, see pages 157, 170, 174,185, 190, 193 and 214.

4 “TUNE/FILE”/“AUDIO” knobPush this knob to display the audiocontrol screen, and turn this knob tomove the station band and files up ordown. For details, see pages 149,156, 161, 174 and 214.

Quick reference

AUDIO/VIDEO SYSTEM

147

5 “LOAD· /CLOSE” buttonPush this button to display the“Load·Eject” screen or close the dis-play. For details, see page 166.

6 “PWR/VOL” knobPush this knob to turn the audio sys-tem on and off, and turn it to adjust thevolume. For details, see page 149.

7 “SAT” buttonPush this button to choose a SAT sta-tion. For details, see pages 149 and161.

8 “DISC·AUX” buttonPush this button to turn theBluetooth� audio player, AUX, USBmemory/iPod, CD changer or DVDplayer* on. For details, see pages149, 155, 169, 184 and 189.


9 “FM 1·2” buttonPush this button to choose an FM sta-tion. Each time this button is pushed,the mode switches between FM1 andFM2. For details, see pages 149 and155.

10 “AM” buttonPush this button to choose an AM sta-tion. For details, see pages 149 and155.

This section describes some of the basicfeatures of your audio system. Some in-formation may not pertain to your system.

Vehicles with smart key system—

Your audio system works when the “EN-GINE START STOP” switch is turned toACCESSORY or IGNITION ON mode.

Vehicles without smart key system—

Your audio system works when the engineswitch is turned to the “ACC” or “ON” posi-tion.

CAUTIONFor vehicles sold in U.S.A. andCanada:

� Part 15 of the FCC RulesFCC Warning:Changes or modifications inconstruction not expressly approvedby the party responsible for com-pliance could void the user’s author-ity to operate the equipment.CAUTION: Radio Frequency Radi-ation ExposureThis device is approved for MobileApplication only and, to comply withapplicable FCC radio frequency ex-posure regulations, must be usedwith a distance of at least 7.9 in. (20cm) between the antenna and thebody of any person at all time duringuse.

Using your audio/videosystem — — Some basics

AUDIO/VIDEO SYSTEM

148

� Laser products� Do not take this unit apart or at-

tempt to make any changesyourself. This is an intricate unitthat uses a laser pickup to re-trieve information from the sur-face of compact discs. The la-ser is carefully shielded so thatits rays remain inside the cabi-net. Therefore, never try to dis-assemble the player or alter anyof its parts since you may be ex-posed to laser rays and danger-ous voltages.

� This product utilizes a laser.Use of controls or adjustmentsor performance of proceduresother than those specified here-in may result in hazardous radi-ation exposure.

NOTICE

To prevent the battery from being dis-charged, do not leave the audio sys-tem on longer than necessary whenthe engine is not running.

(a) Speech command system

By pushing the switch above, you canoperate the speech command system.For the operation of the speech commandsystem and the list of commands, seepages 44 and 47.

AUDIO/VIDEO SYSTEM

149

(b) Turning the system on and off

“TUNE/FILE”/“AUDIO”: Push this knobto display touch−screen buttons for audio/video system (audio control mode).

“PWR/VOL”: Push this knob to turn theaudio/video system on and off. Turn thisknob to adjust the volume. The systemturns on in the last mode used.

You can select the function that enablesautomatic return to the previous screenfrom the audio screen. See page 260 fordetails.

(c) Switching between functions

Push the “DISC·AUX”, “FM 1·2”, “AM”or “SAT” button to turn on the desiredmode.

U6080GS

Push the “TUNE/FILE”/“AUDIO” knoband touch the “AM”, “FM”, “SAT”,“CD”, “DVD*”, “BT”, “AUX” or “USB”tab to turn on the desired mode.*: Vehicles with rear seat entertainment

system

AUDIO/VIDEO SYSTEM

150

Push these buttons or tabs if you want toswitch from one mode to another.

If the disc is not set, the CD changer/DVDplayer* does not turn on.

You can turn off the CD changer/DVD play-er* by ejecting all the discs. If the audiosystem was previously off, then the entireaudio system will be turned off when youeject all the discs. If the other function waspreviously playing, it will come on again.


U6081GS

U6080GS

U6082GS

U6083GS

AUDIO/VIDEO SYSTEM

151

U6084GS

U6086GS

U6085GS

U6078GS

U6079GS

The touch−screen buttons for radio, CDchanger, DVD player*, Bluetooth�audio player, AUX and USB memory/iPod, operation are displayed on thefunction touch−screen button displayscreen when the audio control mode isselected. Touch them lightly anddirectly on the screen.*: Vehicles with rear seat entertainment

system

Touch the tab to select the desired modewhen the audio control mode is selected.

The selected switch is highlighted.

INFORMATION� If the system does not respond to a

touch of a touch−screen button,move your finger away from thescreen and then touch it again.

� You cannot operate dimmedtouch−screen buttons.

� Wipe off fingerprints using a glasscleaning cloth. Do not use chemi-cal cleaners to clean the touchscreen.

AUDIO/VIDEO SYSTEM

152

(d) DSP control1. Push the “TUNE/FILE”/“AUDIO”knob.

U6087GS

2. Touch “Sound” to display the soundadjustment screen.

U6010GI

3. Touch “DSP” tab to display thisscreen.4. Touch “Automatic Sound Levelizer”and select “On” or “Off”.Automatic sound levelizer (ASL):When the audio sound becomes difficult tohear due to road noise, wind noise or othernoises while driving, select “On”. The sys-tem adjusts to the optimum volume andtone quality according to the speed of car.

5. Touch “OK”.

(e) Tone and balanceToneHow good an audio program sounds to youis largely determined by the mix of thetreble, mid and bass levels. In fact, differ-ent kinds of music and vocal programsusually sound better with different mixes oftreble, mid and bass.

BalanceA good balance of the left and right stereochannels and of the front and rear soundlevels is also important.

Keep in mind that if you are listening to astereo recording or broadcast, changingthe right/left balance will increase the vol-ume of one group of sounds while de-creasing the volume of another.

AUDIO/VIDEO SYSTEM

153

U6007GS

1. Touch “Sound” tab to display thisscreen.2. Touch the desired button.“Treble” “+” or “–”: Adjust high−pitchedtones.

“Mid” “+” or “–”: Adjust mid−pitchedtones.

“Bass” “+” or “–”: Adjusts low−pitchedtones.

“Front” or “Rear”: Adjusts sound bal-ance between the front and rear speakers.

“L” or “R”: Adjusts sound balance be-tween the left and right speakers.

3. Touch “OK”.The tone of each mode (for such as AM,FM and CD changer) can be adjusted.

(f) Selecting screen size (with rearseat entertainment system)1. Push the “TUNE/FILE”/“AUDIO”knob and touch “DVD” tab.

U6088GS

2. Touch “Settings”.

U6064GS

3. Touch “Wide”.

AUDIO/VIDEO SYSTEM

154

U6009GS

4. Touch the desired button.“Normal”: Displays a 3 : 4 screen, with

either side in black.“Wide 1”: Widens the 3 : 4 screen hori-

zontally to fill the screen.“Wide 2”: Widens the 3 : 4 screen ver-

tically and horizontally, in the same ratio, to fill thescreen.

When you touch , the previousscreen returns.

5. Touch “Save”.

(g) Your CD changerWhen you insert a disc, touch “Load” andgently push the disc in with the label sideup. This CD changer can store up to fourdiscs. The changer will play from track 1through to the end of the disc. Then it willplay from track 1 of the next disc.

The changer is intended for use with 4.7 in.(12 cm) discs only.

NOTICE

� Do not stack up two discs for inser-tion, or it will cause damage to thechanger. Insert only one disc intothe slot at a time.

� Never try to disassemble or oil anypart of the changer. Do not insertanything other than a disc into theslot.

AUDIO/VIDEO SYSTEM

155

(h) Your DVD player(with rear seat entertainment system)The sound of the rear seat entertainmentsystem can be enjoyed by pushing the“DISC·AUX” button or touching the“DVD” tab on AUDIO screen.

(i) AUX portThe sound of portable audio playersconnected to the AUX port can be enjoyed.Push the “DISC·AUX” button or push the“TUNE/FILE”/“AUDIO” knob to displayaudio screen and touch the “AUX” tab toswitch to AUX mode. When the portableaudio player is not connected to the AUXport, the tab will tone down. For details,refer to the “Owner’s Manual”.

(j) USB portIt is available to connect a USB memory/iPod with the USB port. When the USBmemory/iPod is not connected with theUSB port, the tab will tone down. For de-tails, see “(a) Connecting a USB memoryor iPod” on page 211.

(a) Listening to the radio

Push the “AM” or “FM 1·2” button orpush the “TUNE/FILE”/“AUDIO” knobto display audio screen and touch the“AM” or “FM” tab to choose either anAM or FM station.“AM”, “FM1” or “FM2” appears on thescreen.

If your vehicle is equipped with a satelliteradio broadcast system, when you pushthe “SAT” button or touch the “SAT” tabon AUDIO screen, “SAT1”, “SAT2” or“SAT3” station appears on the display. Fordetails about satellite radio broadcast, see“—Radio operation (XM� Satellite Radiobroadcast)” on page 160.

— Radio operation

AUDIO/VIDEO SYSTEM

156

Turn the knob clockwise to step up thestation band or counterclockwise tostep down.Your radio automatically changes to stereoreception when a stereo broadcast is re-ceived. “ST” appears on the screen. If thesignal becomes weak, the radio reducesthe amount of channel separation to pre-vent the weak signal from creating noise.If the signal becomes extremely weak, theradio switches from stereo to mono recep-tion. In this case, “ST” disappears from thescreen.

U6080GS

(b) Presetting a station1. Tune in the desired station.2. Touch one of the touch−screen but-tons (1 — 6) you want and hold it untila beep is heard. This sets the station tothe touch−screen button and the fre-quency appears on the touch−screenbutton.Each radio mode (AM, FM1 or FM2) canstore up to 6 stations. To change the pre-set station to a different one, follow thesame procedure.

The preset station memory is cancelledwhen the power source is interrupted bybattery disconnection or a blown fuse.

AUDIO/VIDEO SYSTEM

157

(c) Selecting a stationTune in the desired station using one of thefollowing methods.

Preset tuning: Touch the touch−screenbutton (1 — 6) for the station you want.The touch−screen button is highlightedand the station frequency appears on thescreen.

Seek tuning: Push the “SEEK/TRACK”button on either side. The radio will beginseeking up or down for a station of thenearest frequency and will stop on recep-tion. Each time you push the button, thestations will be searched automaticallyone after another.

To scan all the frequencies: Touch“SCAN” on the screen briefly. “SCAN” ap-pears on the screen. The radio will find thenext station and stay there for a few se-conds, and then scan again. To select astation, touch “SCAN” again.

To scan the preset stations: Touch“SCAN” on the screen for longer than asecond. “P. SCAN” appears on the screen.The radio will tune in the next preset sta-tion, stay there for a few seconds, and thenmove to the next preset station. To selecta station, touch “SCAN” again.

(d) Radio Data SystemYour audio system is equipped with RadioData Systems (RDS). RDS mode pro-vides you to receive text messages fromradio stations that utilize RDS transmit-ters.

When RDS is on, the radio can— only select stations of a particular pro-gram type,— display messages from radio stations,— search for a stronger signal station.

RDS features are available for use only onFM stations which broadcast RDS infor-mation.

AUDIO/VIDEO SYSTEM

158

U6080GS

“Type � �”Each time you touch “� Type ” or “Type�”, the program type changes as in thefollowing:

� ROCK

� MISC (Miscellaneous)

� INFORM (Information)

� EASY LIS (Easy listening)

� CLS/JAZZ (Classical music and Jazz)

� R & B (Rhythm and Blues)

� RELIGION

� ALART (Emergency message)

U6089GS

“Type Seek”When a program is set, “Type Seek” ap-pears. Touch the switch and the systemstarts to seek the station in the relevantprogram type.

If any type program station is not found,“Nothing” appears on the display.

AUDIO/VIDEO SYSTEM

159

U6090GSF

“Message”If the system receives a radio text fromRDS station, “MSG” appears on the dis-play. Touch “Message”, and a text mes-sage is displayed on the screen. This func-tion is available only when the vehicle isnot moving.

When you touch “Message Off”, the dis-play returns.

(e) Traffic announcement

U6091GS

“Traffic”A station that regularly broadcasts trafficinformation is automatically located.

When you touch “Traffic”, “Traf. Seek”appears on the display and the radio willstart seeking any traffic program station.

If no traffic program station is found,“Nothing” appears on the display.

If a traffic program station is found, thename for traffic program station is dis-played for a while until a traffic announce-ment is received.

AUDIO/VIDEO SYSTEM

160

To listen to a satellite radio broadcast inyour vehicle, a subscription to the XM�Satellite Radio service is necessary.

(a) How to subscribe to an XM� Satel-lite Radio

An XM� Satellite Radio is a tuner designedexclusively to receive broadcasts providedunder a separate subscription. Availabilityis limited to the 48 contiguous U.S. statesand some Canadian provinces.

How to subscribe:You must enter into a separate serviceagreement with the XM� Satellite Radio inorder to receive satellite broadcast pro-gramming in the vehicle. Additional activa-tion and service subscription fees applythat are not included in the purchase priceof the vehicle and optional digital satellitetuner.

For complete information on subscriptionrates and terms, or to subscribe to the XM�Satellite Radio.

U.S.A.—Visit on the web at www.xmradio.com orcall 1−800−967−2346.

Canada—Visit on the web at www.xmradio.ca or call1−877−438−9677.

The XM� Satellite Radio is solely responsi-ble for the quality, availability and contentof the satellite radio services provided,which are subject to the terms and condi-tions of the XM� Satellite Radio customerservice agreement.

Customers should have their radio IDready; the radio ID can be found by tuningto “channel 000” on the radio. For details,see “(b) Displaying the radio ID” below.

All fees and programming are the respon-sibility of the XM� Satellite Radio and aresubject to change.

Satellite tuner technology notice: Toyota’s satellite radio tuners are awardedType Approval Certificates from XM� Sat-ellite Radio Inc. as proof of compatibilitywith the services offered by the XM� Satel-lite Radio.

(b) Displaying the radio IDEach XM� tuner is identified with a uniqueradio ID. You will need the radio ID whenactivating XM� service or when reportinga problem.

If you select the “CH 000” using the“TUNE/FILE”/“AUDIO” knob, the IDcode of 8 alphanumeric characters ap-pears. If you select another channel, dis-play of the ID code is canceled. The chan-nel(000) alternates the display betweenthe radio ID and the specific radio ID code.

— Radio operation(XM� Satellite Radiobroadcast)

AUDIO/VIDEO SYSTEM

161

(c) Listening to satellite radio

Push the “SAT” button or push the“TUNE/FILE”/“AUDIO” knob to displayaudio screen and touch the “SAT” tabto choose a SAT channel.“SAT1”, “SAT2” or “SAT3” appears on thescreen.

Turn this knob to select the next or pre-vious channel.If you turn continuously, you can rapidlyscroll forward or down through the chan-nels.

(d) Channel category

U6082GS

Touch either “� Type” or “Type �” to goto the next or previous category.

AUDIO/VIDEO SYSTEM

162

(e) Presetting a channel1. Tune in the desired channel.

U6082GS

2. Touch one of the channel selectorbuttons (1 — 6) and hold it until a beepis heard.This sets the channels to the touch−screen button and the name and numberof the channel appears on the touch−screen button.

Each touch−screen button can store threeSAT channels. To change the preset chan-nel to a different one, follow the same pro-cedure.

The preset channel memory is cancelledwhen the power source is interrupted bybattery disconnection or a blown fuse.

(f) Selecting a channelTune in the desired channel using one ofthe following methods.

Preset tuning: Touch the channel selec-tor button (1 — 6) for the channel you want.The button (1 — 6) is highlighted and chan-nel number appears on the display.

To select channel within the currentcategory: Push the “ ” or “ ” button of“SEEK/TRACK”. The radio will step up ordown the channel within the current chan-nel category. Touch “Type Seek”. The ra-dio will step up the channel within the cur-rent channel category.

U6082GS

To scan the currently selected channelcategory: Touch “SCAN” briefly. “SCAN”appears on the display. The radio will findthe next channel in the same channel cate-gory, stay there for a few seconds, andthen scan again. To select a channel,touch “SCAN” a second time.

To scan the preset channels: Touch“SCAN” and hold it until you hear a beep.“P.SCAN” appears on the display. The ra-dio will find the next preset channel, staythere for a few seconds, and then move tothe next preset channel. To select a chan-nel, touch “SCAN” a second time.

AUDIO/VIDEO SYSTEM

163

(g) Displaying the title and name

U6092GS

When you touch “Text”, the song/programtitle and the artist name/feature are dis-played.

Up to 16 alphanumeric characters can bedisplayed. (Some information will not befully displayed.)

When you touch “Text” again, the displayreturns.

AUDIO/VIDEO SYSTEM

164

(h) If the satellite radio tuner malfunctionsWhen problems occur with the XM� tuner, a message will appear on the display. Refer-ring to the table below to identify the problem, take the suggested corrective action.

ANTENNA

The XM� antenna is not connected. Check whether theXM� antenna cable is attached securely.

A short circuit occurs in the antenna or the surroundingantenna cable. See a Toyota certified dealer for assis-tance.

UNAUTH

You have not subscribed to the XM� Satellite Radio.The radio is being updated with the latest encryptioncode. Contact the XM� Satellite Radio for subscriptioninformation. When a contract is canceled, you canchoose the “CH000” and all free−to−air channels.

The premium channel you selected is not authorized.Wait for about 2 seconds until the radio returns to theprevious channel or “CH001”. If it does not change au-tomatically, select another channel. If you want to listento the premium channel, contact the XM� Satellite Ra-dio.

NO SIGNALThe XM� signal is too weak at the current location. Waituntil your vehicle reaches a location with a stronger sig-nal.

LOADINGThe unit is acquiring audio or program information. Waituntil the unit has received the information.

OFF AIRThe channel you selected is not broadcasting any pro-gramming. Select another channel.

−−−−−There is no song/program title or artist name/featureassociated with the channel at that time. No actionneeded.

CH UNAVL

The channel you selected is no longer available. Waitfor about 2 seconds until the radio returns to the pre-vious channel or “CH001”. If it does not change auto-matically, select another channel.

Contact the XM� Listener Care Center at 1−800−967−2346 (U.S.A.) or1−877−438−9677 (Canada).

AUDIO/VIDEO SYSTEM

165

NOTICE

This equipment has been tested andfound to comply with the limits for aclass B digital device, pursuant toPart 15 of the FCC Rules. These limitsare designed to provide reasonableprotection against harmful interfer-ence in a residential installation. Thisequipment generates, uses and canradiate radio frequency energy and, ifnot installed and used in accordancewith the instructions, may causeharmful interference to radio com-munications. However, there is noguarantee that interference will notoccur in a particular installation.

If this equipment does cause harmfulinterference to radio or television re-ception, which can be determined byturning the equipment off and on, theuser is encouraged to try to correctthe interference by one or more of thefollowing measures:

—Reorient or relocate the receivingantenna.

—Increase the separation betweenthe equipment and receiver.

—Connect the equipment into an out-let on a circuit different from that towhich the receiver is connected.

—Consult the dealer or an experi-enced radio/TV technician for help.

Information to user

Alternation or modifications carriedout without appropriate authoriza-tion may invalidate the user’s right tooperate the equipment.

INFORMATIONThis XM� tuner supports “AudioServices” (Music and Talk) of onlyXM� Satellite Radio and “TextInformation”∗ linked to the respective“Audio Services”.∗: Text Information includes, StationName, (Artist) Name, (Song) Title andCategory Name.

AUDIO/VIDEO SYSTEM

166

(a) Inserting discs

Vehicles with smart key system—

The “ENGINE START STOP” switch mustbe in ACCESSORY or IGNITION ONmode.


The engine switch must be in the “ACC” or“ON” position.

Your CD changer can store up to 4 discs.

You can set a disc at the lowest empty discnumber.

1. Push the “LOAD· /CLOSE” but-ton. The “Load·Eject” screen appears.

U6066GS

2. Touch “Load”. The display opens.

3. The amber indicators at either sideof the slot start blinking. When the indi-cators change to green, insert only onedisc. After the disc is loaded, the amberindicators at either side of the slot startblinking again. When the indicatorschange to green, you can insert thenext disc.

4. Push the “LOAD· /CLOSE” but-ton to close the display.The changer will automatically start play-ing from the last disc you inserted.

If the label faces down, the disc cannot beplayed. In this case, “Check CD” appearson the screen.

— CD changer operation

AUDIO/VIDEO SYSTEM

167

CAUTION

� Do not place anything on theopened display, as such items maybe thrown about and possibly in-jure people in the vehicle duringsudden braking or in an accident.

� To reduce the chance of injury incase of an accident or sudden stopwhile driving, keep the displayclosed.

� Take care not to jam your handwhile the display is moving. Other-wise, you could be injured.

NOTICE

� Do not obstruct the display while itis moving. It could damage youraudio/video system.

� Do not insert one disc stacked ontop of another one or feed them incontinuously, to prevent discsfrom getting stuck in the changer.

INFORMATIONUnder extremely cold conditions, thedisplay may react slowly or operationsound may become louder.

(b) Ejecting discs� A single disc alone:


U6019GS

2. Touch the disc number to beejected.The display opens and the amber indica-tors at either side of the slot start blinking.After the disc is ejected, the amber indica-tors change to green. A disc can be in-serted.

AUDIO/VIDEO SYSTEM

168

� All the discs:


U6020GS

2. Touch “Eject All”.The display opens and the amber indica-tors at either side of the slot start blinking.After the disc is ejected, the blinking indi-cators stay on.

3. Remove the disc.The indicators start blinking again and thenext disc is ejected.

If a disc is not removed within 15 secondsafter it is ejected, the operation will be can-celed.

When all the discs are removed, the amberindicators change to green. A disc can beinserted.

U6018GS

The numbers of the trays where the disc isnot set are dimmed.

NOTICE

If a disc cannot be ejected, do not for-cibly take out the disc. Keep pushingthe “LOAD· /CLOSE” button forapproximately 5 seconds and releaseit. At this time, the audio disc and themap DVD−ROM will be ejected.

AUDIO/VIDEO SYSTEM

169

(c) Playing a disc

Push the “DISC·AUX” button or pushthe “TUNE/FILE”/“AUDIO” knob to dis-play audio screen and touch the “CD”tab if the discs are already loaded in thechanger.The discs set in the changer are playedcontinuously, starting with the last disc youinserted. The disc number of the disc cur-rently being played, the track number andthe time from the beginning of the programappear on the screen.

When play of one disc ends, the first trackof the following disc starts. When play ofthe final disc ends, play of the first discstarts again.

The changer will skip any empty disc trays.

Vehicles with rear seat entertainment sys-tem —

If the DVD player is turned on, push the“DISC·AUX” button again or touch “CD”tab to switch to the CD changer.

If the rear seat entertainment system is on,pushing the “DISC·AUX” button switchesthe sound of the front audio system andthat of the rear seat entertainment system.

(d) Selecting a desired disc

U6021GS

Touch “Change Discs” on “CD” screenand touch the desired disc number onthe screen.The selected disc number is highlighted.

The changer will start playing the selecteddisc from the first track.

AUDIO/VIDEO SYSTEM

170

(e) Playing an audio disc

U6093GS

Push the “TUNE/FILE”/“AUDIO” knoband touch the “CD” tab, then touch the“Change Discs”. Choose an audio discnumber to display this screen.

SELECTING A DESIRED TRACK“SEEK/TRACK” button: Use for directaccess to a desired track.

Push either side of the “SEEK/TRACK”button and repeat it until the desired tracknumber appears on the screen. As you re-lease the button, the changer will startplaying the selected track from the begin-ning.

“Select” for Track: The desired track canbe selected from a list. This function isavailable only when the vehicle is not mov-ing.

Touch “Select”. The track list is displayed.

AUDIO/VIDEO SYSTEM

171

Touch the desired track number. Thechanger will start playing the selectedtrack from the beginning.

: By touching this touch−screen but-

ton, the list moves up by 5 track groups. Ifthis button is touched when the top page ofthe list is displayed, the last page is dis-played.


ton, the list moves down by 5 track groups.If this button is touched when the last pageof the list is displayed, the top page is dis-played.

�, �: If � appears to the right of the itemname, the complete name is too long forthe display.

Touch � to scroll to the end of the name.Touch � to scroll the beginning of thename.

Fast forward: Push “ ” side of the“SEEK/TRACK” button and hold it to fastforward the disc. When you release thebutton, the changer will resume playingfrom that position.

Reverse: Push “ ” side of the “SEEK/TRACK” button and hold it to reverse thedisc. When you release the button, thechanger will resume playing.

U6093GS

SEARCHING FOR A DESIRED TRACKOR DISCSearching for a desired track —Touch “SCAN” on the screen brieflywhile the disc is playing.“SCAN” appears on the screen. Thechanger will play the next track for 10 sec-onds, then scan again. To select a track,touch “SCAN” on the screen a secondtime. If the changer reaches the end of thedisc, it will continue scanning at track 1.

After all the tracks are scanned in onepass, normal play resumes.

Searching for a desired disc —Touch “SCAN” on the screen for longerthan a second while the disc is playing.“D.SCAN” appears on the screen. Theprogram at the beginning of each audiodisc will be played for 10 seconds. To con-tinue listening to the program of yourchoice, touch “SCAN” on the screen asecond time.

After all the audio discs are scanned in onepass, normal play resumes.

AUDIO/VIDEO SYSTEM

172

U6094GS

OTHER FUNCTIONS“RPT”: Use it for automatic repeat of thetrack or disc you are currently listening to.

Repeating a track —Touch “RPT” briefly while the track is play-ing. “RPT” appears on the screen. Whenthe track is finished, the changer will auto-matically go back to the beginning of thetrack and play the track again. To cancelit, touch “RPT” once again.

Repeating a disc —Touch “RPT” for longer than a secondwhile the disc is playing. “D.RPT” appearson the screen. When the disc is finished,the changer will automatically go back tothe beginning of the disc and play the discagain. To cancel it, touch “RPT” onceagain.

“RAND”: Use it for automatic and randomselection.

Playing the tracks on one disc in ran-dom order —Touch “RAND” briefly while the disc isplaying. “RAND” appears on the screen.The system selects a track on the disc be-ing listened to in random order. To cancelit, touch “RAND” once again.

Playing the tracks on all the audio discsin random order —Touch “RAND” for longer than a secondwhile the disc is playing. “D.RAND” ap-pears on the screen. The system selectsa track on all the audio discs in the changerin random order. To cancel it, touch“RAND” once again.

If a CD−TEXT disc is inserted, the title ofthe disc and track will be displayed. Up to29 letters can be displayed.

AUDIO/VIDEO SYSTEM

173

(f) Playing a MP3/WMA disc

U6095GS

Push the “TUNE/FILE”/“AUDIO” knoband touch the “CD” tab, then touch the“Change Discs”. Choose an MP3/WMAdisc number to display this screen.

SELECTING A DESIRED FOLDER

“Folder�”: Touch this touch−screen but-ton to go to the next folder.

“Folder�”: Touch this touch−screen but-ton to go to the previous folder.

“Select” for Folder: The desired foldercan be selected in a list. This function isavailable only when the vehicle is not mov-ing.

Touch “Select”. The folder list is dis-played.

U6026GS

Touch the desired folder number. Thechanger will start playing the first file of theselected folder.


ton, the list moves up by 5 folder groups.If this touch−screen button is touchedwhen the top page of the list is displayed,the last page is displayed.


ton, the list moves down by 5 foldergroups. If this touch−screen button istouched when the last page of the list isdisplayed, the top page is displayed.

AUDIO/VIDEO SYSTEM

174

SELECTING A DESIRED FILE“SEEK/TRACK” button: Use for directaccess to a desired file.

Push either side of the “SEEK/TRACK”button and repeat it until the desired filenumber appears on the display. As you re-lease the button, the changer will startplaying the selected file from the begin-ning. When “RAND” or “FLD.RPT” is on,the file number within the folder you arecurrently listening to appears.

Fast forward: Push “ ” side of the“SEEK/TRACK” button and hold it to fastforward the disc. When you release thebutton, the changer will resume playingfrom that position.

Reverse: Push “ ” side of the “SEEK/TRACK” button and hold it to reverse thedisc. When you release the button, thechanger will resume playing.

“TUNE/FILE”/“AUDIO” knob: Use for di-rect access to a desired file in the disc.

Turn the “TUNE/FILE”/“AUDIO” knob tostep up or down all the files in the disc youare currently listening to. The file numberappears on the display. When “RAND” or“FLD.RPT” is on, all the files in the folderyou are currently listening to can bestepped up or down.

AUDIO/VIDEO SYSTEM

175

U6095GS

“Select” for File: The desired file can beselected in a list. This function is availableonly when the vehicle is not moving.

Touch “Select”. The file list is displayed.

U6027GS

Touch the desired file number. The chang-er will start playing the selected file fromthe beginning.


ton, the list moves up by 5 file groups. Ifthis touch−screen button is touched whenthe top page of the list is displayed, the lastpage is displayed.


ton, the list moves down by 5 file groups.If this touch−screen button is touchedwhen the last page of the list is displayed,the top page is displayed.

AUDIO/VIDEO SYSTEM

176

U6096GS

SEARCHING FOR A DESIRED FILETouch “SCAN” on the screen brieflywhile the disc is playing.“SCAN” appears on the screen. Thechanger will play the next file in the folderfor 10 seconds, then scan again. To selecta file, touch “SCAN” on the screen a sec-ond time. If the changer reaches the endof the folder, it will continue scanning fromfile 1.

After all the files are scanned in one pass,normal play resumes.

U6097GS

SEARCHING FOR A DESIRED FOLDERTouch “SCAN” on the screen for longerthan a second while the disc is playing.“FLD.SCAN” appears on the screen. Theprogram at the beginning of each folder willbe played for 10 seconds. To continue lis-tening to the program of your choice, touch“SCAN” on the screen a second time.

After all the folders are scanned in onepass, normal play resumes.

AUDIO/VIDEO SYSTEM

177

U6098GS

OTHER FUNCTIONS“RPT”: Use it for automatic repeat of thefile or folder you are currently listening to.

Repeating a file —Touch “RPT” briefly while the file is play-ing. “RPT” appears on the screen. Whenthe file is finished, the changer will auto-matically go back to the beginning of thefile and play the file again. To cancel it,touch “RPT” once again.

Repeating a folder —Touch “RPT” for longer than a secondwhile the folder is playing. “FLD.RPT” ap-pears on the screen. When the folder isfinished, the changer will automatically goback to the beginning of the folder and playthe folder again. To cancel it, touch “RPT”once again.

“RAND”: Use it for automatic and randomselection of the folder or the disc which youare currently listening to.

Playing the files in one folder in randomorder —Touch “RAND” briefly while the disc isplaying. “RAND” appears on the screen.The system selects a file in the folder youare currently listening to. To cancel it,touch “RAND” once again.

Playing the files in all the folders on onedisc in random order —Touch “RAND” for longer than a secondwhile the disc is playing. “FLD.RAND” ap-pears on the screen. The system selectsa file in all the folders. To cancel it, touch“RAND” once again.

When a file is skipped or the system is in-operative, touch “RAND” to reset.

AUDIO/VIDEO SYSTEM

178

(g) If the player malfunctionsIf “CD Error” appears on the screen, audiosignals of the disc cannot be read or thesystem has trouble. Push the “DIS-C·AUX” button once again.

If the changer does not operate, check thatthe disc surface is not soiled or damaged.If the disc is O.K., the temperature of thechanger’s internal mechanism may beraised because of high external tempera-ture. Remove the disc from the changer tocool it.

If the changer still does not operate, haveit checked by your dealer.

If an MP3/WMA disc contains CD−DAfiles, only CD−DA files are played. If anMP3/WMA disc contains files other thanCD−DA, only MP3/WMA files are played.

The Bluetooth� audio system enablesusers to enjoy music played on a porta-ble player from the vehicle speaker viawireless communication.

This audio system supportsBluetooth�, a wireless data systemcapable of playing portable audiomusic without cables. If your portableplayer does not support Bluetooth�,the Bluetooth� audio system will notfunction.

— Bluetooth� audiooperation

AUDIO/VIDEO SYSTEM

179

INFORMATIONPortable players must correspond tothe following specifications in orderto be connected to the Bluetooth� au-dio system. However, please notethat some functions may be limiteddepending on the type of portableplayer.

� Bluetooth� SpecificationVer.1.1 or higher(Recommended: Ver.2.0+EDR orhigher)

� Profile

� A2DP (Advanced AudioDistribution Profile) Ver.1.0 orhigher

� AVRCP (Audio/Video RemoteControl Profile) Ver.1.0 or higher(Recommended: Ver.1.3 orhigher)

Please go to “http://www.toyota.letstalk.com/” to find approvedBluetooth� phones for this system.

Bluetooth is a trademark owned byBluetooth SIG. Inc.

CAUTIONDo not operate the player’s controlsor connect to the Bluetooth� audiosystem while driving.

NOTICE

Do not leave your portable player inthe car. In particular, high tempera-tures inside the vehicle may damagethe portable player.

INFORMATION� In the following conditions, the

system may not function.� The portable player is turned off.� The portable player is not con-

nected.� The portable player has a low bat-

tery.� It may take time, the phone connec-

tion is carried out duringBluetooth� audio play.

AUDIO/VIDEO SYSTEM

180

1 Indicates the condition of theBluetooth� connection.

“Blue” indicates an excellent connectionto Bluetooth�.

“Yellow” indicates a bad connection toBluetooth�, resulting in possible deteriora-tion of audio quality.

: No connection to Bluetooth�.

2 Indicates the amount of batterycharge left.

Empty Full

Remaining charge is not displayed whilethe Bluetooth� is connecting.

The amount left does not always corre-spond with the one of your portable player.

This system doesn’t have a charging func-tion.

An antenna for the Bluetooth�connection is built in to the display. Theindication of the Bluetooth�connection may turn yellow and thesystem may not function when you usethe Bluetooth� portable player in thefollowing conditions.� Your portable player is hiding behind

from the display (behind the seat or inthe glove box or console box).

� Your portable player touches or is cov-ered with metal materials.

Leave the Bluetooth� portable player in aplace where the “Blue” indication is dis-played.

The portable player information is regis-tered when the Bluetooth� audio system isconnected. When you release possessionof your vehicle, remove your portable play-er. (See “(a) Removing a Bluetooth� au-dio” on page 321.)

AUDIO/VIDEO SYSTEM

181

� For vehicles sold in U.S.A.

FCC ID : HYQDNNS025Type : DNNS025

This device complies with part 15 of theFCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmfulinterference, and (2) this device mustaccept any interference received, in-cluding interference that may cause un-desired operation.

CAUTIONFCC WARNING: Changes or modifi-cations not expressly approved bythe party responsible for compliancecould void the user’s authority to op-erate the equipment.

CAUTION: Radio Frequency Radi-ation ExposureThis equipment complies with FCCradiation exposure limits set forth foruncontrolled environment and meetsthe FCC radio frequency (RF) Expo-sure Guidelines in Supplement C toOET65. This equipment has very lowlevels of RF energy that it deemed tocomply without maximum permis-sive exposure evaluation (MPE). Butit is desirable that it should beinstalled and operated with at least 20cm and more between the radiatorand person’s body (excluding ex-tremities: hands, wrists, feet andankles).

Co−location : This transmitter mustnot be co−located or operated in con-junction with any other antenna ortransmitter.

� For vehicles sold in Canada

IC : 1551A−DNNS025Type : DNNS025

Operation is subject to the following twoconditions; (1) this device may notcause interference, and (2) this devicemust accept any interference, includinginterference that may cause undesiredoperation of the device.

L’utilisation de ce dispositif est autoriséeseulement aux deux conditionssuivantes : (1) il ne doit pas produire debrouillage, et (2) l’utilisateur du dispositifdoit être prêt à accepter tout brouillageradioélectrique reçu, même si cebrouillage est susceptible decompromettre le fonctionnement dudispositif.

CAUTIONThis equipment complies with ICradiation exposure limits set forth foruncontrolled environment and meetsRSS−102 of the IC radio frequency(RF) Exposure rules.

This equipment has very low levels ofRF energy that it deemed to complywithout maximum permissive expo-sure evaluation (MPE). But it is desir-able that it should be installed andoperated with at least 20 cm and morebetween the radiator and person’sbody (excluding extremities: hands,wrists, feet and ankles).

Co−location : This transmitter mustnot be co−located or operated in con-junction with any other antenna ortransmitter.

AUDIO/VIDEO SYSTEM

182

CAUTION

Cet équipement est conforme auxlimitations sur l’exposition auxradiations IC définies pour unéquipement non contrôlé et estconforme avec les directives surRSS−102 des règles sur l’expositionaux fréquences radio (RF). Cetéquipement présente de très faiblesniveaux d’énergie RF qui sontconsidérés se conformer sansévaluation maximum d’expositionautorisée (MPE). Mais il estsouhaitable qu’il devrait être installéet commandé avec au moins 20 cm etplus entre le radiateur et le corps dela personne (à l’exclusion desextrémités: mains, poignets, pieds etchevilles).Colocalisation: Cet émetteur ne doitpas être co−localisé ou mis enservice en même temps que touteautre antenne ou émetteur.

(a) Connecting Bluetooth� audio play-erTo use the Bluetooth� audio system,you need to enter your portable playerinto the system. Once you haveregistered it, you can enjoy your musicon the vehicle’s audio system. (See“—Setting Bluetooth� audio” on page319.)For the operation procedure for theportable player, see the instructionmanual that comes with it.� When the connection method is

“From Vehicle”.� When the auto connection is on

Vehicles with smart key sys-tem—When the portable player isstandby for the connection, itwill be automatically connectedwhenever the “ENGINE STARTSTOP” switch is in either AC-CESSORY or IGNITION ONmode.Vehicles without smart key sys-tem—When the portable player isstandby for the connection, itwill be automatically connectedwhenever the engine switch is ineither “ACC” or “ON” position.

� When the auto connection is offManually connect the portableplayer in accordance with thefollowing procedure.

AUDIO/VIDEO SYSTEM

183

Touch “Connect”.

U6033GS

When the connection is completed, thisscreen is displayed. Now you can use theportable player.

U6034GS

This screen will appear when the connec-tion has failed.

� When the connection method is“From Portable Player”

Operate the portable player and con-nect it to the Bluetooth� audio system.For the operation procedure for theportable player, see the instructionmanual that comes with it.

Touch “Connect”.

U6035GS

Connect the portable audio player to theBluetooth� audio system.

U6036GS

This screen will appear when the connec-tion has been successfully established.

AUDIO/VIDEO SYSTEM

184

� Reconnecting the portable playerVehicles with smart key system—

If the portable player is disconnected withpoor reception from the Bluetooth� net-work when the “ENGINE START STOP”switch is in ACCESSORY or IGNITIONON mode, the system automatically re-connects the portable player. In this case,the connection result is not displayed.


If the portable player is disconnected withpoor reception from the Bluetooth� net-work when the engine switch is in the“ACC” or “ON” position, the system auto-matically reconnects the portable player.In this case, the connection result is notdisplayed.

If the Bluetooth� is disconnected on pur-pose such as you turned your portableplayer off, this does not happen.

Reconnect it by the following method.

� Select the portable player again.� Enter the portable player.

(b) Playing a Bluetooth� audio� Playing and pausing Bluetooth� au-

dio

Push the “DISC·AUX” button or pushthe “TUNE/FILE”/“AUDIO” knob todisplay this screen and touch the “BT”tab if the Bluetooth� audio player isalready connected.

Touch and the music will start playing.

Touch and the music will pause.

Touch and the music will start playingagain.

Depending on the portable player that isconnected to the system, the music may

start playing when touching while it ispaused. On the other hand, the music may

pause when touching while it is play-ing.

AUDIO/VIDEO SYSTEM

185

Some titles may not be displayed depend-ing on the type of portable player.

� Selecting a desired track

“SEEK/TRACK” button: Use for directaccess to a desired track.

Push either side of the “SEEK/TRACK”button and repeat it until the desired tracknumber appears on the screen. As you re-lease the button, the portable player willstart playing the selected track from thebeginning.

Fast forward:Push and hold the “ ” button of “SEEK/TRACK” to fast forward the player. Whenyou release the button, the portable playerwill resume playing from that position.

Reverse:Push and hold the “ ” button of “SEEK/TRACK” to reverse the player. When yourelease the button, the player will resumeplaying.

INFORMATIONDepending on the portable player thatis connected to the system, certainfunctions may not be available.

AUDIO/VIDEO SYSTEM

186

� Selecting a desired album

“Album �”: Touch this button to go tothe next album.“Album �”: Touch this button to go tothe previous album.


� Other function

“RPT”: Use this control to automatic re-play the track you are currently listening to.

Repeating a track—While the track is playing, touch “RPT”briefly.“RPT” appears on the screen. When thetrack is finished, the player will automati-cally play it again. To cancel the repeat,touch “RPT” once again.

AUDIO/VIDEO SYSTEM

187

“RAND”: Use this for automatic and ran-dom selection of tracks on the album thatyou are currently listening to.

Playing the tracks in the album in ran-dom order—While the track is playing, touch“RAND” briefly.“RAND” appears on the screen. The sys-tem selects a track in the album you arecurrently listening to. To cancel this func-tion, touch “RAND” once again.


The DVD player can play DVD video, au-dio CD, video CD, CD text, dts−CD orMP3 disc only when a disc is loaded inthe DVD player. A WMA and DVD audiodisc cannot be played.For details of the rear seat entertainmentsystem, see “Rear seat entertainment sys-tem features” on page 221.

For appropriate discs for this player, see“Audio/video system operating hints” onpage 242.

(a) Inserting the disc

A port must be used for 3 in. (8 cm) discswhich are loaded in the same manner asfor 4.7 in. (12 cm) discs.

— DVD player operation

AUDIO/VIDEO SYSTEM

188

The indicator light turns on while the discis loaded.

If the label faces downward, the disc can-not be played. In this case, “Check disc”appears on the screen.

If a disc which is not playable is inserted,“Check disc” will also appear on thescreen. For appropriate discs for this play-er, see “Audio/video system operatinghints” on page 242.

NOTICE

Never try to disassemble or oil anypart of the DVD player. Do not insertanything other than a disc into theslot.

(b) Ejecting a disc

Push the “ ” button.

AUDIO/VIDEO SYSTEM

189

(c) Playing a disc

Push the “DISC·AUX” button or pushthe “TUNE/FILE”/“AUDIO” knob to dis-play audio screen and touch the “DVD”tab if a disc is already loaded in theplayer.“DVD” appears on the screen. (If the CDchanger is turned on, push the“DISC·AUX” button again or touch “DVD”tab to switch to the DVD player.)

(d) Operating an audio CD

U6102GS

PLAYING AN AUDIO CDCD text only — The disc title and track titlewill appear on the screen when pushingthe “DISC·AUX” button.

Push the “TUNE/FILE”/“AUDIO” knoband touch the “DVD” tab to display thisscreen.

AUDIO/VIDEO SYSTEM

190

SELECTING A DESIRED TRACK“SEEK/TRACK” button: Use for directaccess to a desired track.

Push either side of the “SEEK/TRACK”button and repeat it until the desired tracknumber appears on the display. As you re-lease the button, the player will start play-ing the selected track from the beginning.

“Select” for track: The desired track canbe selected from a list. This function isavailable only when the vehicle is not mov-ing.

Touch “Select”. The track list is displayed.

U6041GS

Touch the desired track number. The play-er will start playing the selected track fromthe beginning.


ton, the list moves up by 5 track groups. Ifthis touch−screen button is touched whenthe top page of the list is displayed, the lastpage is displayed.


ton, the list moves down by 5 track groups.If this touch−screen button is touchedwhen the last page of the list is displayed,the top page is displayed.

Fast forward: Push “ ” side of “SEEK/TRACK” button and hold it to fast forwardthe disc. When you release the button, theplayer will resume playing from that posi-tion.

Reverse: Push “ ” side of the “SEEK/TRACK” button and hold it to reverse thedisc. When you release the button, theplayer will resume playing.

AUDIO/VIDEO SYSTEM

191

U6103GS

SEARCHING FOR A DESIRED TRACKTouch “SCAN” on the screen.“SCAN” will be highlighted on the screen.The player will play the next track for 10seconds, then scan again. To select atrack, touch “SCAN” on the screen a sec-ond time. If the player reaches the end ofthe disc, it will continue scanning at track 1.

After all the tracks are scanned in onepass, normal play resumes.

U6104GS

OTHER FUNCTIONS“RPT”: Use it for automatic repeat of thetrack you are currently listening to.

Touch “RPT” while the track is playing.When the track is finished, the player willautomatically go back to the beginning ofthe track and play the track again. To can-cel it, touch “RPT” once again.

“RAND”: Use it for automatic and randomselection of the disc which you are current-ly listening to.

When “RAND” is touched, the system se-lects a track in the disc you are currentlylistening to. To cancel it, touch “RAND”once again.

If a CD−TEXT disc is inserted, the title ofthe disc and track will be displayed. Up to29 letters can be displayed.

AUDIO/VIDEO SYSTEM

192

(e) Operating a MP3 DISC

U6105GS

PLAYING A MP3 DISCPush the “TUNE/FILE”/“AUDIO” knoband touch the “DVD” tab to display thisscreen.SELECTING A DESIRED FOLDER

“Folder�”: Touch this touch−screen but-ton briefly to go to the next folder.

“Folder�”: Touch this touch−screen but-ton briefly to go to the previous folder. Tojump up to the first folder, touch and holdthis touch−screen button until the beepsounds.



U6045GS

Touch the desired folder number. Theplayer will start playing the first file of theselected folder.





AUDIO/VIDEO SYSTEM

193

U6105GS

SELECTING A DESIRED FILE“SEEK/TRACK” button: Use for directaccess to a desired file.

Push either side of the “SEEK/TRACK”button and repeat it until the desired filenumber appears on the display. As you re-lease the button, the player will start play-ing the selected file from the beginning.

Fast forward: Push “ ” side of the“SEEK/TRACK” button and hold it to fastforward the disc. When you release thebutton, the player will resume playing fromthat position.

Reverse: Push “ ” side of the “SEEK/TRACK” button and hold it to reverse thedisc. When you release the button, theplayer will resume playing.

“Select” for File: The desired file can beselected in a list. This function is availableonly when the vehicle is not moving.

Touch “Select”. The file list is displayed.

AUDIO/VIDEO SYSTEM

194

U6046GS

Touch the desired file number. The playerwill start playing the selected file from thebeginning.


ton, the list moves up by 5 file groups. Ifthis touch−screen button is touched whenthe top page of the list is displayed, the lastpage is displayed.


ton, the list moves down by 5 file groups.If this touch−screen button is touchedwhen the last page of the list is displayed,the top page is displayed.

U6106GS

SEARCHING FOR A DESIRED FILETouch “SCAN” on the screen briefly.“SCAN” appears on the screen. The DVDplayer will play the next file in the folder for10 seconds, then scan again. To select afile, touch “SCAN” on the screen a secondtime. If the player reaches the end of thefolder, it will continue scanning from file 1.


AUDIO/VIDEO SYSTEM

195

U6107GS

SEARCHING FOR A DESIRED FOLDERTouch and hold “SCAN” on the screenuntil the beep sounds.“FLD.SCAN” appears on the screen. TheDVD player will play the file at the begin-ning of each folder for 10 seconds, thenscan again. To select a file, touch “SCAN”on the screen a second time.


U6108GS

OTHER FUNCTIONS“RPT”: Use it for automatic repeat of thefile or folder you are currently listening to.

Repeating a file —Touch “RPT” briefly while the file is play-ing. “RPT” appears on the screen. Whenthe file is finished, the player will automati-cally go back to the beginning of the fileand play the file again. To cancel it, touch“RPT” once again.

Repeating a folder —Touch and hold “RPT” until the beepsounds while the folder is playing.“FLD.RPT” appears on the screen. Whenthe folder is finished, the player will auto-matically go back to the beginning of thefolder and play the folder again. To cancelit, touch “RPT” once again.

AUDIO/VIDEO SYSTEM

196

“RAND”: Use it for automatic and randomselection of the folder which you are cur-rently listening to or of all the folders.

Playing the files in one folder in randomorder —Touch “RAND” briefly. “RAND” appearson the screen. The system selects a file inthe folder you are currently listening to. Tocancel it, touch “RAND” once again.

Playing the files in all the folders in ran-dom order —Touch and hold “RAND” until the beepsounds. “FLD.RAND” appears on thescreen. The system selects a file in thefolders of all the trays which are set andplays it. To cancel it, touch “RAND” onceagain.

When a file is skipped or the system is in-operative, touch “RAND” to reset.

(f) Operating a DVD video discNOTE: The playback condition of someDVD video discs may be determined bya DVD video software producer. ThisDVD player plays a disc as the softwareproducer intended. So some functionsmay not work properly. Be sure to readthe instruction manual for the DVDvideo disc separately provided. For thedetailed information about DVD videodiscs, see “(i) DVD player and DVDvideo disc information” on page 230.Precautions on DVD video discWhen recording with a DVD video or videoCD, audio tracks may not record in somecases while the menu is displayed. As au-dio will not play in this case, verify that thevideo tracks are playing and then activateplayback.

When playback of a disc is completed:

� If an audio CD or MP3 disc is playing,the first track or file starts.

� If a DVD video or video CD is playing,playback will stop or the menu screenwill be displayed.

The title/chapter number and playbacktime display may not appear while playingback certain DVD video discs.

AUDIO/VIDEO SYSTEM

197

CAUTION

Conversational speech on someDVDs is recorded at a low volume toemphasize the impact of sound ef-fects. If you adjust the volume as-suming that the conversations repre-sent the maximum volume level thatthe DVD will play, you may be startledby louder sound effects or when youchange to a different audio source.The louder sounds may have a signif-icant impact on the human body orpose a driving hazard. Keep this inmind when you adjust the volume.

U6077GS

Vehicles with smart key system—This screen appears when the videoscreen is first displayed after “ENGINESTART STOP” switch is in ACCESSO-RY or IGNITION ON mode.Vehicles without smart key system—This screen appears when the videoscreen is first displayed after the en-gine switch is in the “ACC” or “ON”position.

AUDIO/VIDEO SYSTEM

198

U6084GS

PLAYING A DVD DISCPush the “TUNE/FILE”/“AUDIO” knoband touch the “DVD” tab to display thisscreen.Touch “Settings” on “DVD” screen andtouch “Wide” on “Settings” screen. Thescreen mode can be changed.

If you touch “Full Screen” when the ve-hicle is completely stopped and the park-ing brake is applied, the video screen re-turns.

U6051GS

DVD SETTINGSIf you touch “Settings” on “DVD” screen,“Settings” screen appears.

AUDIO/VIDEO SYSTEM

199

DESCRIPTION OF SETTINGS“DVD Video Settings”: The initial set upscreen appears. (See page 203.)

“Search”: The title search screen ap-pears. (See page 201.)

“Return”: Touching this will display thepredetermined scene and start playingfrom there.

“Audio”: The audio changing screen ap-pears. (See page 202.)

“Subtitle”: The subtitle changing screenappears. (See page 201.)

“Angle”: The angle selection screen ap-pears. (See page 202.)

“Wide”: The screen mode screen ap-pears. (See page 153.)

U6084GS

DISPLAYING DVD CONTROLS

If you touch , while watching video,

DVD controls will appear.

If “ ” appears on the screen when youtouch a control, the operation relevant tothe control is not permitted.

AUDIO/VIDEO SYSTEM

200

DESCRIPTION OF DVD CONTROLS“Menu” and “Top Menu”: If you touchany of the above controls, the menuscreen for DVD video appears. (For theoperation, see the manual that come withthe DVD video disc provided separately.)

: Touching this will display the control

key screen shown on the right.

: Touching this will pause the video

screen.

: Touching this will fast reverse dur-

ing playback.

: Touching this will stop the video

screen.

: Touching this will resume normal

play during pause.

: Touching this will fast forward dur-

ing playback and forward frame by frameduring pause.

U6052GS

U6053GS

SELECTING A MENU ITEM

Enter the menu item using ,

, and and touch“Enter”. The player starts playing vid-eo for that menu item. (For details, seethe manual that come with the DVD vid-eo disc provided separately.)Each time you touch “Move Buttons”,the controls on the screen move up-ward and downward.When you touch the screen, the controlswill disappear. To display them again,touch the screen.


AUDIO/VIDEO SYSTEM

201

U6054GS

SEARCHING BY TITLEEnter the title number and touch “OK”.The player starts playing video for thattitle number.When you push either side of the “SEEK/TRACK” button, you can select a chapter.

If you enter the wrong numbers, touch

to delete the numbers.


CHANGING THE SUBTITLELANGUAGEEach time you touch “Change”, the lan-guage is selected from the ones storedin the discs and changed.When you touch “Hide”, the subtitle can behidden.


AUDIO/VIDEO SYSTEM

202

U6069GSb

CHANGING THE AUDIO LANGUAGEEach time you touch “Change”, the lan-guage is selected from the ones storedin the discs and changed.


U6076GS

CHANGING THE ANGLEThe angle can be selected for discs thatare multi−angle compatible when theangle mark appears on the screen.Each time you touch “Change”, theangle is selected from the ones storedin the discs and changed.

When you touch , and the previousscreen returns.

AUDIO/VIDEO SYSTEM

203

U6058GS

SETUP MENUThere are initial setting touch−screenbuttons on the “Setup Menu” screen.After you change the initial setting, touch

. The initial setting screen will beturned off and return to the previousscreen.

When “Default” is touched, all menus areinitialized.

The initial setting can be changed.

� Audio languageYou can change the audio language.1. Touch “Audio Language”.2. Touch the language you want tohear on the “Audio Language” screen.If you cannot find the language you want tohear on this screen, touch “Other” andenter a language code. For the entry oflanguage code, see the following “ENTERAUDIO LANGUAGE CODE”.

To return to the “Setup Menu” screen,touch the .

� Subtitle languageYou can change the subtitle language.1. Touch “Subtitle Language”.2. Touch a language you want to readon the “Subtitle Language” screen.If you cannot find the language you want toread on this screen, touch “Other” andenter a language code. For the entry oflanguage code, see the following “ENTERAUDIO LANGUAGE CODE”.

To return to the “Setup Menu” screen,touch the .

� DVD languageYou can change the language on theDVD video menu.1. Touch “DVD Language”.2. Touch the language you want toread on the “DVD Language” screen.If you cannot find the language you want toread on this screen, touch “Other” andenter a language code. For the entry oflanguage code, see the following “ENTERAUDIO LANGUAGE CODE”.

To return to the “Setup Menu” screen,touch .

AUDIO/VIDEO SYSTEM

204

� Angle markThe multi−angle mark can be turned onor off on the screen while the discwhich is multi−angle compatible is be-ing played.Each time you touch “Angle Mark”, theangle mark on the screen turns on or offalternately.� Parental lockThe level of viewer restrictions can bechanged.1. Touch “Parental Lock”.2. Enter the 4−digit personal code onthe “Key code” screen.If you enter the wrong numbers, touch


10 touches of will initialize the per-

sonal code.

To return to the “Setup Menu” screen,touch .

3. Touch a parental level (1 — 8) on the“Select Restriction Level”. Touch the

switch to return to the “SetupMenu” screen.

ENTER AUDIO LANGUAGE CODE

U6059GS

If you touch “Other” on the “SelectAudio Language” screen, “SelectSubtitle Language” screen or “DVDLanguage” screen, you can select thelanguage you want to hear or read byentering a language code.1. Enter the 4−digit language code.If you enter the wrong numbers, touch


2. Touch “OK”.

Code Language

0514 English

1001 Japanese

0618 French

0405 German

0920 Italian

0519 Spanish

2608 Chinese

1412 Dutch

1620 Portuguese

1922 Swedish

1821 Russian

1115 Korean

0512 Greek

0101 Afar

0102 Abkhazian

AUDIO/VIDEO SYSTEM

205

0106 Afrikaans

0113 Amharic

0118 Arabic

0119 Assamese

0125 Aymara

0126 Azerbaijani

0201 Bashkir

0205 Byelorussian

0207 Bulgarian

0208 Bihari

0209 Bislama

0214 Bengali

0215 Tibetan

0218 Breton

0301 Catalan

0315 Corsican

0319 Czech

0325 Welsh

0401 Danish

0426 Bhutani

0515 Esperanto

0520 Estonian

0521 Basque

0601 Persian

0609 Finnish

0610 Fiji

0615 Faroese

0625 Frisian

0701 Irish

0704 Scots−Gaelic

0712 Galician

0714 Guarani

0721 Gujarati

0801 Hausa

0809 Hindi

0818 Croatian

0821 Hungarian

0825 Armenian

0901 Interlingua

0905 Interlingue

0911 Inupiak

0914 Indonesian

0919 Icelandic

0923 Hebrew

1009 Yiddish

1023 Javanese

1101 Georgian

1111 Kazakh

1112 Greenlandic

1113 Cambodian

1114 Kannada

1119 Kashmiri

1121 Kurdish

1125 Kirghiz

1201 Latin

1214 Lingala

1215 Laothian

1220 Lithuanian

1222 Latvian

1307 Malagasy

1309 Maori

1311 Macedonian

1312 Malayalam

1314 Mongolian

AUDIO/VIDEO SYSTEM

206

1315 Moldavian

1318 Marathi

1319 Malay

1320 Maltese

1325 Burmese

1401 Nauru

1405 Nepali

1415 Norwegian

1503 Occitan

1513 (Afan)Oromo

1518 Oriya

1601 Panjabi

1612 Polish

1619 Pashto, Pushto

1721 Quechua

1813 Rhaeto−Romance

1814 Kirundi

1815 Romanian

1823 Kinyarwanda

1901 Sanskrit

1904 Sindhi

1907 Sangho

1908 Serbo−Croatian

1909 Sinhalese

1911 Slovak

1912 Slovenian

1913 Samoan

1914 Shona

1915 Somali

1917 Albanian

1918 Serbian

1919 Siswati

1920 Sesotho

1921 Sundanese

1923 Swahili

2001 Tamil

2005 Telugu

2007 Tajik

2008 Thai

2009 Tigrinya

2011 Turkmen

2012 Tagalog

2014 Setswana

2015 Tonga

2018 Turkish

2019 Tsonga

2020 Tatar

2023 Twi

2111 Ukrainian

2118 Urdu

2126 Uzbek

2209 Vietnamese

2215 Volapük

2315 Wolof

2408 Xhosa

2515 Yoruba

2621 Zulu

AUDIO/VIDEO SYSTEM

207

SETUP OPERATION FROM THE REARSEAT

U6060GS

This screen appears when a rear passen-ger selects the setup menu.

If you want to cancel the setup operationfrom the rear seat, touch “Play”. The play-er will resume normal play.

Under the same condition, the rear pas-senger can cancel the setup operationfrom the front seat.

To lock the operation of the player from therear seat, see “� Rear system lock” onpage 262.

(g) Operating a video CD

U6110GS

PLAYING A VIDEO CDPush the “TUNE/FILE”/“AUDIO” knoband touch the “DVD” tab to display thisscreen.When you touch “Wide” on “Settings”screen, the screen mode can be changed.

If you touch “Full Screen” when the ve-hicle is completely stopped and the park-ing brake is applied, the video screen re-turns.

AUDIO/VIDEO SYSTEM

208

U6062GS

DISPLAYING VIDEO CD SETTINGSIf you touch “Settings” on “DVD” screen,“Settings” screen appears.

DESCRIPTION OF VIDEO CDSETTINGS� Controls on top page“Select Number”: The track or numbersearch screen appears. (See “SEARCH-ING BY TRACK” on page 210.)

“Prev. Page”: When you touch this whilethe disc menu is displayed, the previouspage appears on the screen. If you touchthis while the player is playing video, theprevious track is searched and played.

“Next Page”: When you touch this whilethe disc menu is displayed, the next pageappears on the display. If you touch thiswhile the player is playing video, the nexttrack is searched and played.

“Main/Sub”: A multiplex transmissionchanging control. The mode changes fromMain/Sub to Main, to Sub and back toMain/Sub by touching this control.

“Return”: Touching this will display thepredetermined scene and start playingfrom there.

“Wide”: The screen mode screen ap-pears.

AUDIO/VIDEO SYSTEM

209

DISPLAYING VIDEO CD CONTROLSIf you touch the part where controls are notlocated while you are watching video onthe video CD, video CD controls will ap-pear.

If “ ” appears on the display when youtouch a control, the operation is not per-mitted.

DESCRIPTION OF VIDEO CDCONTROLS

: Use this to pause the video screen.

: Touch this to fast reverse during

playback.

: Touch this to resume playing during

pause.

: Touch this to fast forward during the

playback and start playing frame by frameduring pause.

AUDIO/VIDEO SYSTEM

210

U6072GSa

SEARCHING BY TRACKEnter the track numbers and touch“OK”. The player starts playing videofor that title number.You can select a track number by pushing“ ” or “ ” on the “SEEK/TRACK” but-ton.

If you enter the wrong numbers, touch


Touch , and the previous screen re-turns.

(h) If the player malfunctionsIf the player or another unit equipped withthe player malfunction, your audio systemwill display following messages.

If “Check disc” appears on the display:It indicates that the disc dirty, damaged, orit was inserted upside down. Clean thedisc or insert it correctly. If a disc which isnot playable is inserted, “Check disc” willalso appear on the screen. Forappropriate discs for this player, see“Audio/video system operating hints” onpage 242.

If “Region code error” appears on thedisplay: It indicates that the DVD regioncode is not set properly.

If “DVD error” appears on the display:It indicates that the inside of the player unitmay be too hot due to the very high ambi-ent temperature. Remove the disc fromthe player and allow the player to cooldown.

If the malfunction is not rectified: Takeyour vehicle to your dealer.

If an MP3 disc contains CD−DA files, onlyCD−DA files are played. If an MP3 disccontains files other than CD−DA, only MP3files are played.

AUDIO/VIDEO SYSTEM

211

Connecting a USB memory or iPod en-ables you to enjoy music from the ve-hicle speakers.

CAUTIONDo not operate the player’s controlsor connect the USB memory or iPodwhile driving.

NOTICE

� Do not leave your portable player inthe car. In particular, high tempera-tures inside the vehicle may dam-age the portable player.

� Do not push down on or apply un-necessary pressure to the portableplayer while it is connected as thismay damage the portable player orits terminal.

� Do not insert foreign objects intothe port as this may damage theportable player or its terminal.

(a) Connecting a USB memory or iPod

� Vehicles with seat heater

� Vehicles without seat heater

Open the cover and connect a USBmemory or iPod using an iPod cable.Turn on the power of the USB memory oriPod if it is not turned on.

— USB memory/iPod operation

AUDIO/VIDEO SYSTEM

212

(b) Playing a USB memory or iPod� Playing and pausing a file or track

U6078GS

� USB memory

U6079GS

� iPod

Touch “USB” tab to display this screenif the USB memory or iPod is alreadyconnected.

Touch and the music will start playing.

Touch and the music will pause.

Touch and the music will start playingagain.

INFORMATION� When an iPod is connected and the

audio source is changed to iPodmode, the iPod will resume playfrom the same point in which it waslast used.

� When the USB memory is con-nected and the audio source ischanged to USB memory mode,the USB memory will start playingthe first file in the first folder. If thesame device is removed and rein-serted (and the contents have notbeen changed), the USB memorywill resume play from the samepoint in which it was last used.

AUDIO/VIDEO SYSTEM

213

� Selecting a play mode (iPod only)

U6079GS

1. Touch “Menu”.

2. Select the desired play mode.

� Selecting a desired folder (USBmemory only)

U6078GS

“Folder�”: Touch this button to go to thenext folder.

“Folder�”: Touch this button to go to theprevious folder.



Touch the desired folder number. The play-er will start playing the first file of the se-lected folder.



AUDIO/VIDEO SYSTEM

214



� Selecting a desired file or track

“SEEK/TRACK” button: Use for directaccess to a desired file or track.

Push either side of the “SEEK/TRACK”button and repeat it until the desired file ortrack appears on the screen. As you re-lease the button, the USB memory or iPodwill start playing the selected file or trackfrom the beginning.

Fast forward:Push and hold the “ ” side of the “SEEK/TRACK” button to fast forward the player.When you release the button, the playerwill resume playing from that position.

Reverse:Push and hold the “ ” side of the “SEEK/TRACK” button to reverse the player.When you release the button, the playerwill resume playing.

AUDIO/VIDEO SYSTEM

215

“TUNE/FILE”/“AUDIO” knob: Use for di-rect access to a desired file or track in theplayer.

Turn the “TUNE/FILE”/“AUDIO” knob tostep up or down all the files or tracks in theplayer you are currently listening to.

U6078GS

� USB memory

U6079GS

� iPod

“Select” for File or Track: The desiredfile or track can be selected in a list. Thisfunction is available only when the vehicleis not moving.

Touch “Select”. The file or track list is dis-played.

AUDIO/VIDEO SYSTEM

216

Touch the desired file or track number. Thechanger will start playing the selected fileor track from the beginning.


ton, the list moves up by 5 file or trackgroups. If this touch−screen button istouched when the top page of the list is dis-played, the last page is displayed.


ton, the list moves down by 5 file or trackgroups. If this touch−screen button istouched when the last page of the list isdisplayed, the top page is displayed.

� Searching for a desired file (USBmemory only)

U6111GS

Touch “SCAN” on the screen brieflywhile the music is playing.“SCAN” appears on the screen. The play-er will play the next file for 10 seconds,then scan again. To select a file, touch“SCAN” on the screen a second time. Ifthe player reaches the end of the memory,it will continue scanning at file1.


AUDIO/VIDEO SYSTEM

217

� Searching for a desired folder (USBmemory only)

U6112GS

Touch “SCAN” on the screen for longerthan a second while the music is play-ing.“FLD.SCAN” appears on the screen. Theprogram at the beginning of each folder willbe played for 10 seconds. To continue lis-tening to the program of your choice, touch“SCAN” on the screen a second time.


� Other functions

U6078GS

� USB memory

U6079GS

� iPod

“RPT”: Use this control to automatic re-play the file or track you are currently lis-tening to.

Repeating a file or track—While the file or track is playing, touch“RPT” briefly.“RPT” appears on the screen. When thefile or track is finished, the player will auto-matically play it again. To cancel the re-peat, select “RPT” once again.

AUDIO/VIDEO SYSTEM

218

Repeating a folder (USB memoryonly) —While the folder is playing, touch “RPT”for longer than a second.“FLD.RPT” appears on the screen. Whenthe folder is finished, the changer will auto-matically go back to the beginning of thefolder and play the folder again. To cancelit, select “RPT” once again.

“RAND”: Use this for automatic and ran-dom selection of files or tracks on the fold-er that you are currently listening to.

Playing the file or track in random or-der—While the file or track is playing, touch“RAND” briefly.“RAND” appears on the screen. The sys-tem selects a file or track you are currentlylistening to. To cancel this function, touch“RAND” once again.

Playing the files in all files in random or-der —Touch “RAND” for longer than a secondwhile the music is playing. “FLD.RAND”appears on the screen. The system se-lects a file in all files. To cancel it, touch“RAND” once again.

When a file is skipped or the system is in-operative, select “RAND” to reset.

Some parts of the audio system can be ad-justed using the switches on the steeringwheel.

Details of the specific switches, controls,and features are described below.1 Volume control switch2 “ ” switch3 “MODE” switch

1 Volume control switchPush “+” side to increase the volume. Thevolume continues to increase while theswitch is being pressed.

Push “–” side to decrease the volume.The volume continues to decrease whilethe switch is being pressed.

Audio/video remote controls(steering switches)

AUDIO/VIDEO SYSTEM

219

2 “ ” switchRadioThis switch has the following features—

To select a preset station:Quickly push and release the “ ” or “ ”side of the switch. Do this again to selectthe next preset station.

To seek a station:Push and hold the “ ” or “ ” side of theswitch until you hear a beep. Do this againto find the next station. If you push theswitch on either side during the seekmode, seeking will be cancelled.

To step up or down the frequency, pushand hold the switch even after you hear abeep. When you release from the switch,the radio will begin seeking up or down fora station. Do this again to find the next sta-tion.

XM� Satellite Radio—

To select a preset channel, push the “ ”or “ ” side of the switch. Repeat until adesired channel is found.

CD changerUse this switch to skip up or down to a dif-ferent track in either direction.

To select a desired track or file:Quickly push and release the “ ” or “ ”side of the switch until the track you wantto listen to is set. If you want to return to thebeginning of the current track, push the“ ” side of the switch once, quickly.

To select a desired disc:Push and hold the “ ” or “ ” switch untilyou hear a beep to change to the next orthe previous disc. Repeat this operationuntil you reach the disc you want to listento.

Vehicles with rear seat entertainment sys-tem —

DVD playerWhile the DVD player is in operation, thechapter or track can be changed by push-ing the “ ” or “ ” switch.

Bluetooth� audio playerUse this switch to skip up or down to a dif-ferent track or album in either direction.

To select a desired track:Quickly push and release the “ ” or “ ”side of the switch until the track you wantto listen to is set. If you want to return to thebeginning of the current track, push the“ ” side of the switch once quickly.

To select a desired album:Push and hold “ ” or “ ” switch untilyou hear a beep to change to the next orthe previous album. Repeat this operationuntil you reach the album you want to listento.

USB memory/iPodUse this switch to skip up or down to a dif-ferent track, file, album or folder in eitherdirection.

To select a desired track or file:Quickly push and release the “ ” or “ ”side of the switch until the track or file youwant to listen to is set. If you want to returnto the beginning of the current track or file,push the “ ” side of the switch once,quickly.

To select a desired album or folder:Push and hold “ ” or “ ” switch untilyou hear a beep to change to the next orthe previous album or folder. Repeat thisoperation until you reach the album or fold-er you want to listen to.

AUDIO/VIDEO SYSTEM

220

3 “MODE” switchPush “MODE” switch to select an audiomode. Each push changes the mode se-quentially if the desired mode is ready touse.

To turn the audio/video system on, pushthe “MODE” switch.

To turn the audio/video system off, pushand hold the “MODE” switch until you heara beep.

AUDIO/VIDEO SYSTEM

221

The rear seat entertainment system is designed for the rear passengers to enjoy audioand DVD video separately from the front audio system.

1 Front audio system2 Display3 Headphone volume control dials and

headphone jacks4 DVD player

5 Rear seat entertainment system con-troller

6 Power outlet7 A/V input port

Rear seat entertainment system features —

AUDIO/VIDEO SYSTEM

222

Vehicles with smart key system —

The rear seat entertainment system canbe used when the “ENGINE STARTSTOP” switch is in ACCESSORY or IGNI-TION ON mode.

Vehicles without smart key system —

The rear seat entertainment system canbe used when the engine switch is in“ACC” or “ON” position.

� Opening and closing the display

Push the lock release button to openthe display.Pull the display down to an easily viewableangle (between 90� and 125�).

To close the display, push the displayup until a click is heard.The illumination of the screen is automati-cally turned off when the display is closed.However, the rear seat entertainment sys-tem is not turned off.

AUDIO/VIDEO SYSTEM

223

� Loading a disc

Insert the disc into the slot with the la-bel side up.The “DISC” indicator light turns on whilethe disc is loaded.

The player will play the track or chapter,and will repeat it after it reaches the end.

� Ejecting a disc

Push and remove the disc.

AUDIO/VIDEO SYSTEM

224

� Headphone jacks

1 To use the headphones, connectthem to the jack.

2 To adjust the volumeRight side dial: Turn it toward the frontof the vehicle to increase the volume.Turn it toward the rear of the vehicleto decrease the volume.

Left side dial: Turn it toward the rearof the vehicle to increase the volume.Turn it toward the front of the vehicleto decrease the volume.

� Before using the remote controller(for new vehicle owners)

An insulating sheet is set to prevent thebatteries from being discharged. Removethe insulating sheet before using the re-mote controller.

� HeadphonesWith some headphones generally avail-able in the market, it may be difficult tocatch signals properly. Toyota recom-mends the use of Toyota genuine wirelessheadphones.

Please contact your Toyota dealer for fur-ther details.

� VolumeAdjust the volume when you connect theheadphones to the jack. Loud sounds mayhave a significant impact on the humanbody.

AUDIO/VIDEO SYSTEM

225

CAUTION

� While drivingDo not use headphones. Doing so may cause an accident,resulting in death or serious injury.

� When the rear seat entertainmentsystem is not usedKeep the display closed. In the event of an accident or sud-den braking, the opened displaymay hit an occupant’s body, result-ing in injury.

� To prevent accidents and electricshockDo not disassemble or modify theremote controller.

� When the remote controller is notusedStow the remote controller. Inju-ries may result in the event of anaccident or sudden braking.

� Conversational speech on someDVDs is recorded at a low volumeto emphasize the impact of soundeffects. If you adjust the volumeassuming that the conversationsrepresent the maximum volumelevel that the DVD will play, youmay be startled by louder sound ef-fects or when you change to a dif-ferent audio source. The loudersounds may have a significant im-pact on the human body or pose adriving hazard. Keep this in mindwhen you adjust the volume.

NOTICE

� Cleaning the display

Wipe the display with a dry softcloth.

If the screen is wiped with a roughcloth, the surface of the screenmay be scratched.

� To prevent damage to the remotecontroller

Keep the remote control away fromdirect sunlight, temperature heatand high humidity.

Do not drop or knock the remotecontroller against hard objects.

Do not sit on or place heavy ob-jects on the remote controller.

� DVD player

Never try to disassemble or oil anypart of the DVD player. Do not in-sert anything other than a disc intothe slot.

AUDIO/VIDEO SYSTEM

226

� Remote controller 1 Turning on the DVD mode2 Turning on or off the operation

switches on the display3 Selecting a chapter4 Reversing a disc5 Turning on the menu screen6 Turning on the title selection screen7 Searching the title8 Changing the screen angle9 Inputting the selected switch

10 Selecting a switch11 Playing/pausing a disc12 Fast forwarding a disc13 Stopping a disc14 Changing the subtitle language15 Changing the audio language

— Using the DVD player(DVD video)

AUDIO/VIDEO SYSTEM

227

� Unit

1 Turning on the DVD mode2 Skipping to the desired chapter3 Playing/pausing a disc4 Turning on or off the operation

switches on the display5 Selecting a switch6 Inputting the selected switch

� Display (Page 1)

1 Turning off the operation switches onthe display

2 Displaying to Page 23 Turning on or off the title selection

screen for the disc4 Turning on or off the menu screen for

the disc5 Reversing a disc6 Stopping a disc7 Pausing the disc/canceling the pause8 Fast forwarding a disc

AUDIO/VIDEO SYSTEM

228

� Display (Page 2)

9 Displaying to the initial setting screen10 Displaying to Page 111 Search for a title12 Returning to the previous screen13 Changing the audio language14 Changing the subtitle language15 Changing the angle

INFORMATIONTo operate from the front audio sys-tem, see “— DVD player operation”on page 187.

(a) Turning on or off the operationswitches

Push or to turn on the opera-

tion switches. Push or onceagain or select “Hide Buttons” to turn offthe operation switches.

(b) Turning on the title selectionscreen

Push or select “Top Menu” to turnon the title selection screen. For the op-eration of the title selection screen, see theseparate manual for the DVD disc.

(c) Turning on the menu screen

Push or select “Menu” to turn onthe menu screen. For the operation of themenu screen, see the separate manual forthe DVD disc.

(d) Returning to the previous screenSelect “Return” to return to the previousscreen. For the operation of the menuscreen, see the separate manual for theDVD disc.

AUDIO/VIDEO SYSTEM

229

(e) Searching for a title

Push or select “Search” to dis-play the screen to search for a title.Select the title number, and push “ENT” toinput it. Select “Back” to return to the pre-vious screen.

(f) Changing the subtitle language

Push or select “Sub Title” to dis-play the subtitle language screen.

Each time is pushed or “Sub Title”is selected, another language stored onthe disc is selected. Select “Back” to return to the previousscreen.

(g) Changing the audio language

Push or select “Audio” to displaythe audio language screen.

Each time is pushed or “Audio” isselected, another language stored on thedisc is selected. Select “Back” to return to the previousscreen.

(h) Changing the angle

Push or select “Angle” to displaythe screen to change the angle.

Each time is pushed or “Angle” isselected, the angle changes. Select “Back” to return to the previousscreen.

AUDIO/VIDEO SYSTEM

230

(i) DVD player and DVD video disc in-formationTo lock the rear seat entertainment sys-tem, see “� Rear system lock (with rearseat entertainment system)” on page 262.

When appears on the screen, it indi-cates that the selected switch cannotwork.

� Error messagesDISC CHECK: Indicates that the disc is dirty, damaged orwas inserted upside down. Clean the discor insert it correctly.

REGION ERROR: Indicates that the DVD region code is notset properly.

DVD ERROR: Indicates that there is a problem inside theplayer. Eject the disc. Set the disc again.If the malfunction still exists, take the ve-hicle to your Toyota dealer.

DVD VIDEO DISCSThis DVD player conforms to NTSC col-or TV formats. The DVD video disc con-forming to another formats such asPAL or SECAM cannot be used.Region codes: Some DVD video discshave a region code indicating a countrywhere you can use the DVD video disc onthis DVD player. If the DVD video disc isnot labeled as “ALL” or “1”, you cannot useit on this DVD player. If you attempt to playan inappropriate DVD video disc on thisplayer, “Region code error” appears on thescreen. Even if the DVD video disc doesnot have a region code, there is a case thatyou cannot use it.

Marks shown on DVD video discs:

Indicates NTSCformat of color TV.

Indicates the numberof audio tracks.

Indicates the numberof language subtitles.

Indicates the numberof angles.

Indicates the screen tobe selected.Wide screen: 16:9Standard: 4:3Indicates a region codeby which this video disccan be played.ALL: in all countriesNumber: region code

AUDIO/VIDEO SYSTEM

231

DVD VIDEO DISC GLOSSARYDVD video discs: Digital versatile Discthat holds video. DVD video discs haveadopted “MPEG2”, one of the world stan-dards of digital compression technologies.The picture data is compressed by 1/40 onaverage and stored. Variable rate en-coded technology in which the volume ofdata assigned to the picture is changed de-pending on the picture format has alsobeen adopted. Audio data is stored usingPCM and Dolby digital, which enableshigher quality of sound. Furthermore, mul-ti−angle and multi−language features willalso help you enjoy the more advancedtechnology of DVD video.

Viewer restrictions: This feature limitswhat can be viewed in conformity with alevel of restrictions of the country. The lev-el of restrictions varies depending on theDVD video disc. Some DVD video discscannot be played at all, or violent scenesare skipped or replaced with other scenes.

Level 1: DVD video discs for children canbe played.

Level 2 − 7: DVD video discs for childrenand G−rated movie can be played.

Level 8: All types of the DVD video discscan be played.

Multi−angle feature: You can enjoy thesame scene at different angles.

Multi−language feature: You can select alanguage of the subtitle and audio.

Region codes: The region codes are pro-vided on DVD players and DVD discs. Ifthe DVD video disc does not have thesame region code as the DVD player, youcannot play the disc on the DVD player.For region codes, see page 230.

Audio: This DVD player can play linerPCM, Dolby digital and MPEG audio for-mat DVD. Other decoded type cannot beplayed.

Title and chapter: Video and audio pro-grams stored in DVD video disc are divid-ed in parts by title and chapter.

Title: The largest unit of the video and au-dio programs stored on DVD video discs.Usually, one piece of movie, one album, orone audio program is assigned as a title.

Chapter: The unit smaller than that of title.A title comprises plural chapters.

Manufactured under license fromDolby Laboratories. “Dolby”, “Pro Log-ic”, and the double−D symbol are trade-marks of Dolby Laboratories. Confi-dential unpublished works.�1992−1997 Dolby Laboratories. Allrights reserved.“DTS” is a trademark of Digital TheaterSystems, Inc.

AUDIO/VIDEO SYSTEM

232

� Remote controller

1 Selecting a switch2 Selecting a chapter3 Playing/pausing a disc4 Reversing a disc5 Displaying operation switches6 Inputting the selected switch7 Fast forwarding a disc8 Stopping a disc9 Changing the initial setting

� Unit1 Skipping to the desired chapter2 Playing/pausing a disc3 Selecting a switch4 Inputting the selected switch

— Using the DVD player(video CD)

AUDIO/VIDEO SYSTEM

233

� Display (page 1)

1 Selecting a disc menu number2 Turning off the menu screen3 Displaying to page 24 Turning on the disc menu5 Returning to the previous page

screen (with the disc menu dis-played)

6 Proceeding to the next page screen(with the disc menu displayed)

7 Changing to a multiplex transmission

� Display (page 2)

8 Displaying to page 19 Reversing a disc

10 Pausing the disc/canceling the pause11 Fast forwarding a disc


AUDIO/VIDEO SYSTEM

234

� Selecting a disc menu numberSelect “Select Number” to display thedisc menu number search screen.Select the disc menu number, and push“ENT” to input it. Select “Back” to return to the previousscreen.

� Using the control screen

Using the control screen, push or

to display the control screen.1 Repeat play2 Random playback3 Search playback

Canceling random, repeat and scanplaySelect “RPT”, “RAND” or “SCAN” again.


— Using the DVD player(audio CD/CD text)

AUDIO/VIDEO SYSTEM

235

� Using the control screen

Push or to display the controlscreen.1 Repeat play2 Random playback3 Search playback4 Displaying file information5 Selecting folder


� Repeat playRepeat a fileSelect “RPT”.

Repeat all of files in a folder Select “RPT”, and push and hold “ENT”.

� Random playbackPlaying files from a particular folder inrandom orderSelect “RAND”.Playing all of the files on a disc in ran-dom orderSelect “RAND”, and push and hold“ENT”.

� Search playbackSelecting the desired file by cueing thefiles in the folderSelect “SCAN”.The player will scan all the files in the fold-er. Each file will be played for 10 seconds.

� Selecting the desired file by cueingthe folders on the disc

Select “SCAN”, and push and hold“ENT”. The player will scan all the folderson the disc. The first file in each folder willbe played for 10 seconds.

� Canceling random, repeat and playback

Select “PRT”, “RAND” or “SCAN” again.

— Using the DVD player(MP3 discs)

AUDIO/VIDEO SYSTEM

236

Push “VIDEO” to select the video mode.

Before switching to the video mode, con-nect the audio source to the A/V input port.

� Using the port

Open the cover.The A/V input port is composed of 3 inputports.

Yellow: Image input port

White: Left channel audio input port

Red: Right channel audio input port

The rear seat entertainment system playsvideos and sound when audio−videoequipment is connected to the A/V inputport. For details, refer to the manufactur-er’s instructions.

The power outlet is used to connect the au-dio device. See the vehicle owner’s manu-al.

NOTICE

When the A/V input port is not in use,keep the A/V input port cover closed.Inserting anything other than an ap-propriate plug may cause electricalfailure or a short circuit.

— Using the video mode

AUDIO/VIDEO SYSTEM

237

Push or select “Set Up” to dis-play the initial setting screen.The following initialization can bechanged here.� “Audio Language”

� “Subtitle Language”

� “DVD Language”

� “Angle Mark”

� “Parental Lock”

� Changing the audio language

Select “Audio Language”. Select thelanguage you want to hear, and push“ENT” to input it.

Select “Others” if you cannot find thelanguage you want to hear. Enter theappropriate 4−digit language code. Se-lect a number, and push “ENT” to inputit.Language code list If a code that is not in the list is entered, “In-correct Code” will appear on the screen.(See page 204.)

— Changing the initialsetting

AUDIO/VIDEO SYSTEM

238

� Changing the subtitle language

Select “Subtitle Language”. Select thelanguage you want to read, and push“ENT” to input it.

Select “Others” if you cannot find thelanguage you want to read. Enter theappropriate 4−digit language code. Se-lect a number, and push “ENT” to inputit.Language code list If a code that is not in the list is entered, “In-correct Code” will appear on the screen.(See page 204.)

� Changing the DVD language

Select “DVD Language”. Select the lan-guage you want to read and push“ENT” to input it.

Select “Others” if you cannot find thelanguage you want to read. Enter theappropriate 4−digit language code. Se-lect a number, and push “ENT” to inputit.Language code list If a code that is not in the list is entered, “In-correct Code” will appear on the screen.(See page 204.)

AUDIO/VIDEO SYSTEM

239

� Turning on or off the angle markThe angle mark can be turned on fordiscs that are multi−angle compatible.Each time you push “ENT” when “AngleMark” is selected, the angle mark turns onor off alternately.

� Setting viewer restriction levels

Setting a password allows the viewerrestriction to be effective.Select “Parental Lock”. Enter the pass-word and push “ENT”. The setting can-not be changed unless the password isentered.When you forget the password, initializethe password. (See page 240.)

Select a restriction level (1−8), andpush “ENT”. The smaller the level num-ber, the stricter the age limit.

AUDIO/VIDEO SYSTEM

240

� Setting the display mode

Pushing changes the displaymodes sequentially as follows:

Normal → “Wide 1” → Wide 2Returning to the previous screenSelect “BACK”, and push “ENT”.

� To initialize the passwordPush � on the remote controller or unit tentimes when the screen to enter the person-al code is displayed.

� Adjusting the screen

Push .Select the brightness, contrast, tone or col-

or, and make adjustments. Push or“ENT” to input it.

Brightness, contrast, tone and coloradjustment“Brightness” “+”:Brightens the screen.

“Brightness” “−”:Darkens the screen.

“Contrast” “+”:Strengthens the contrast of the screen.

“Contrast” “−”:Weakens the contrast of the screen.

“Tone” “+”: Strengthens the tone of thescreen.

“Tone” “−”: Weakens the tone of thescreen.

“Color” “Red”:Strengthens the red color of the screen.

“Color” “Green”:Strengthens the green color of the screen.

AUDIO/VIDEO SYSTEM

241

Necessary item for replacing “3 AA bat-teries”.

1. Remove the cover.

2. Remove the depleted batteries andinstall new 3 AA batteries.

If the batteries are discharged, the fol-lowing symptoms may occur.� The rear seat entertainment system

control will not function properly.

� The operational range is reduced.

When using 3 AA batteries� Batteries can be purchased at your

Toyota dealer, electric appliance shop,or camera stores.

� Replace only with the same or equiva-lent type recommended by a Toyotadealer.

� Dispose of used batteries according tothe local laws.

CAUTION

Removed battery and other parts:� Keep away from children.� These parts are small and if swal-

lowed by a child they can causechoking.

NOTICE

For normal operation after replacingthe battery. Observe the followingprecautions to prevent accidents:

� Always work with dry hands. Mois-ture may cause the battery to rust.

� Do not touch or move any othercomponents inside the remotecontroller.

� Do not bend either of the batteryterminals.

— Replacing the batteries

AUDIO/VIDEO SYSTEM

242

NOTICE

To ensure correct audio/video sys-tem operations:

� Be careful not to spill beveragesover the audio/video system.

� Do not put anything other than acompact disc into the slot.

� Do not put anything other than anappropriate disc into the CDchanger or DVD player.

� The use of a cellular phone insideor near the vehicle may cause anoise from the speakers of the au-dio system which you are listeningto. However, this does not indicatea malfunction.

RADIO RECEPTIONUsually, a problem with radio receptiondoes not mean there is a problem with yourradio — it is just the normal result of condi-tions outside the vehicle.

For example, nearby buildings and terraincan interfere with FM reception. Powerlines or telephone wires can interfere withAM signals. And of course, radio signalshave a limited range. The farther you arefrom a station, the weaker its signal will be.In addition, reception conditions changeconstantly as your vehicle moves.

Here are some common reception prob-lems that probably do not indicate a prob-lem with your radio:

FM

Fading and drifting stations — Generally,the effective range of FM is about 25 miles(40 km). Once outside this range, you maynotice fading and drifting, which increasewith the distance from the radio transmit-ter. They are often accompanied by distor-tion.

Multi−path — FM signals are reflective,making it possible for two signals to reachyour antenna at the same time. If this hap-pens, the signals will cancel each otherout, causing a momentary flutter or loss ofreception.

Static and fluttering — These occur whensignals are blocked by buildings, trees, orother large objects. Increasing the basslevel may reduce static and fluttering.

Station swapping — If the FM signal youare listening to is interrupted or weakened,and there is another strong station nearbyon the FM band, your radio may tune in thesecond station until the original signal canbe picked up again.

AM

Fading — AM broadcasts are reflected bythe upper atmosphere — especially atnight. These reflected signals can inter-fere with those received directly from theradio station, causing the radio station tosound alternately strong and weak.

Station interference — When a reflectedsignal and a signal received directly froma radio station are very nearly the samefrequency, they can interfere with eachother, making it difficult to hear the broad-cast.

Static — AM is easily affected by externalsources of electrical noise, such as hightension power lines, lightening, or electri-cal motors. This results in static.

Audio/video systemoperating hints

AUDIO/VIDEO SYSTEM

243

XM�

Cargo loaded on the roof luggage carrier,especially metal objects, may adverselyaffect the reception of XM� Satellite Radio.

Alternation or modifications carried outwithout appropriate authorization may in-validate the user’s right to operate theequipment.

iPodAbout iPod —� Apple is not responsible for the opera-

tion of this device or its compliance withsafety and regulatory standards.

� iPod is a trademark of Apple Inc., regis-tered in the U.S. and other countries.

Compatible models —

Model Generation Software version

iPod 5th generation

Ver. 1.2.0 orhigher

iPodnano

1st generation

Ver. 1.3.0 orhigher

2nd generation

Ver. 1.1.2 orhigher

3rd generation

Ver. 1.0.0 orhigher

iPodtouch

1st generation

Ver. 1.1.0 orhigher

iPodclassic

1st generation

Ver. 1.0.0 orhigher

Depending on differences between mod-els or software versions etc., some modelslisted above might be incompatible withthis system. iPod 4th generation and earlier models arenot compatible with this system. iPhone, iPod mini, iPod shuffle and iPodphoto are not compatible with this system.

USB memoryUSB memories that can be used for MP3and WMA playback.

� USB communication formats: USB 2.0FS (12 MBPS)

� File formats: FAT 16/32 (Windows�)

� Correspondence class: Mass storageclass

AUDIO/VIDEO SYSTEM

244

CARING FOR YOUR CD CHANGER,DVD PLAYER AND DISCS� Your CD changer is intended for use

with 4.7 in. (12 cm) discs only.

� Extremely high temperatures can keepyour CD changer and DVD player fromworking. On hot days, use the airconditioning to cool the vehicle interiorbefore you use the changer and player.

� Bumpy roads or other vibrations maymake your CD changer and DVD play-er skip.

� If moisture gets into your CD changerand DVD player, you may not play eventhough they appear to be working. Re-move the disc from the changer andplayer and wait until it dries.

CAUTIONCD changer and DVD player use aninvisible laser beam which couldcause hazardous radiation exposureif directed outside the unit. Be sure tooperate the changers and playerscorrectly.

XS18016

CD changer� Use only discs marked as shown abo-

ve. The following products may not beplayable on your changer.

Copy−protected CDCD−ROM

AUDIO/VIDEO SYSTEM

245

Audio CDs

DVD videodiscs

Video CDs

DVD player� Use only discs marked as shown abo-

ve. The following products may not beplayable on your player.

SACDCopy−protected CDCD−ROMDVD−RDVD+RDVD−RWDVD+RWDVD−ROMDVD−RAMDVD−Audio

6U5B93X

� Special shaped discs

6U5B95X

� Transparent/translucent discs

6U5B94X

� Low quality discs

AUDIO/VIDEO SYSTEM

246

6U5B96X

� Labeled discs

NOTICE

� Do not use special shaped, trans-parent/translucent, low quality orlabeled discs such as those shownin the illustrations. The use of suchdiscs may damage the player orchanger, or it may be impossible toeject the disc.

� This system is not designed for useof Dual Disc. Do not use Dual Discbecause it may cause damage tothe player or changer.

� Do not use a disc with protectionring. The use of such disc maydamage the player or changer, or itmay be impossible to eject thedisc.

� If a disc cannot be ejected, do notforcibly take out the disc. Keeppushing the “LOAD· /CLOSE”button for approximately 5 sec-onds and release it. At this time,the audio disc and the map DVD−ROM will be ejected.

6U5B97X

� Correct � Wrong

� Handle discs carefully, especiallywhen you are inserting them. Holdthem on the edge and do not bend the-m. Avoid getting fingerprints on them,particularly on the shiny side.

� Dirt, scratches, warping, pin holes, orother disc damage could cause theplayer to skip or to repeat a section ofa track. (To see a pin hole, hold the discup to the light.)

� Remove discs from the players whenyou are not using them. Store them intheir plastic cases away from moisture,heat, and direct sunlight.

AUDIO/VIDEO SYSTEM

247

6U5B98X

To clean a disc: Wipe it with a soft, lint−free cloth that has been dampened withwater. Wipe in a straight line from the cen-ter to the edge of the disc (not in circles).Dry it with another soft, lint−free cloth. Donot use a conventional record cleaner oranti−static device.

MP3/WMA FILES� MP3 (MPEG Audio Layer 3) and WMA

(Windows Media Audio) are audiocompression standards.

� The MP3/WMA player can play MP3and WMA files on CD−ROM, CD−Rand CD−RW discs.

The unit can play disc recordings com-patible with ISO 9660 level 1 and level2 and with the Romeo and Joliet filesystem.

� When naming an MP3 or WMA file, addthe appropriate file extension (.mp3 or.wma).

� The MP3/WMA player plays back fileswith .mp3 or .wma file extensions asMP3 or WMA files. To prevent noiseand playback errors, use the appropri-ate file extensions.

� The player can play only the first ses-sion using multi−session compatibleCDs.

� MP3 player—MP3 files are compatiblewith the ID3 Tag Ver. 1.0, Ver. 1.1, Ver.2.2, and Ver. 2.3 formats. The unit can-not display disc title, track title and art-ist name in other formats.

� USB memory—MP3 files are compat-ible with the ID3 Tag Ver. 1.0, Ver.1.1,Ver 2.2, Ver 2.3 and Ver 2.4 formats.The unit cannot display track title andartist name in other formats.

� WMA files can contain a WMA tag thatis used in the same way as an ID3 tag.WMA tags carry information such astrack title, artist name.

� The emphasis function is availableonly when playing MP3/WMA files re-corded at 32, 44.1 and 48 kHz.

AUDIO/VIDEO SYSTEM

248

Sampling frequencyMP3 files for MP3 player:MPEG 1 LAYER 3—32, 44.1, 48 kHzMPEG 2 LSF LAYER 3—16, 22.05, 24 kHzMP3 files for USB memory:MPEG 1 AUDIO LAYER 2, 3—32,44.1, 48kHzMPEG 2 AUDIO LAYER 2, 3—16, 22.05,24 kHzMPEG 2.5—8, 11.025, 12 kHzWMA files for WMA player:Ver. 7, 8, 9 CBR—32, 44.1, 48kHzWMA files for USB memory:Ver. 9—HIGH PROFILE 32, 44.1, 48 kHz

� The sound quality of MP3/WMA filesgenerally improves with higher bit rate-s. In order to achieve a reasonable lev-el of sound quality, discs recorded witha bit rate of at least 128 kbps are rec-ommended.

Playable bit ratesMP3 files for MP3 player:MPEG1 LAYER3—64 to 320 kbpsMPEG2 LSF LAYER3—64 to 160 kbpsMP3 files for USB memory:MPEG 1 AUDIO LAYER 2, 3—32 to320 kbpsMPEG 2 AUDIO LAYER 2, 3—32 to160 kbpsMPEG 2.5—32 to 160 kbpsWMA files for WMA player:Ver. 7, 8 CBR—48 to 192 kbpsVer. 9 CBR—48 to 320 kbpsWMA files for USB memory:Ver. 9—HIGH PROFILE 32 to 320kbps, VBR (Variable Bit Rate)

� The MP3/WMA player does not playback MP3/WMA files from discs re-corder using packet write data transfer(UDF format). Discs should be re-corded using “pre−mastering” softwarerather than packet−write software.

� M3u playlists are not compatible withthe audio player.

� MP3i (MP3 interactive) and MP3PROformats are not compatible with the au-dio player.

� The player is compatible with VBR(Variable Bit Rate).

� When playing back files recorded asVBR (Variable Bit Rate) files, the playtime will not be correctly displayed iffast−forward or reverse operations areused.

� It is not possible to check folders thatdo not include MP3/WMA files.

� MP3/WMA files in folders up to 8 levelsdeep can be played. However, thestart of playback may be delayed whenusing discs containing numerous lev-els of folders. For this reason, we rec-ommend creating discs with no morethan two levels of folders.

� It is possible to play up to 192 folders or255 files on one disc.

AUDIO/VIDEO SYSTEM

249

6U5161aX003.mp3

001.mp3002.mp3

Folder 1

Folder 2004.mp3005.mp3

Folder 3006.mp3

MP3 player (rear seat entertainment system)

6U5161aX

001.mp3002.wma

Folder 1003.mp3Folder 2004.mp3005.wma

Folder 3006.mp3

MP3/WMA player (front audio system)

� The play order of the compact disc withthe structure shown above is as fol-lows:

MP3 player (rear seat entertainment sys-tem)

001.mp3 002.mp3 . . . 006.mp3

MP3/WMA player (front audio system)

001.mp3 002.wma . . . 006.mp3

� MP3 player (rear seat entertainmentsystem)—It is possible to play up to253 folders on one disc.

� MP3/WMA player (front audio sys-tem)—It is possible to play up to 192folders or 255 files on one disc.

� USB memory player— It is possible toplay up to 999 folders or 255 files perfolder.

� The order changes depending on thePC and MP3/WMA encoding softwareyou use.

AUDIO/VIDEO SYSTEM

250

CD−R and CD−RW discs� CD−R/CD−RW discs that have not

been subject to the “finalizing process”(a process that allows discs to beplayed on a conventional CD player)cannot be played.

� It may not be possible to play CD−R/CD−RW discs recorded on a musicCD recorder or a personal computerbecause of disc characteristics,scratches or dirt on the disc, or dirt,condensation, etc. on the lens of theunit.

� It may not be possible to play discs re-corded on a personal computer de-pending on the application settings andthe environment. Record with the cor-rect format. (For details, contact theappropriate application manufacturersof the applications.)

� CD−R/CD−RW discs may be damagedby direct exposure to sunlight, hightemperatures or other storage condi-tions. The unit may be unable to playsome damaged discs.

� If you insert a CD−RW disc into theMP3/WMA player, playback will beginmore slowly than with a conventionalCD or CD−R disc.

� Recordings on CD−R/CD−RW cannotbe played using the DDCD (DoubleDensity CD) system.

TERMSPacket write—This is a general term that describes theprocess of writing data on−demand toCD−R, etc., in the same way that data iswritten to floppy or hard discs.

ID3 Tag—This is a method of embedding track−re-lated information in an MP3 file. This em-bedded information can include the tracktitle, the artist’s name, the album title, themusic genre, the year of production, com-ments and other data. The contents canbe freely edited using software with ID3 tagediting functions. Although the tags are re-stricted to the number of characters, the in-formation can be viewed when the track isplayed back.

WMA Tag—WMA files can contain a WMA tag that isused in the same way as an ID3 tag. WMAtags carry information such as track title,artist name.

ISO 9660 format—This is the international standard for theformatting of CD−ROM folders and files.For the ISO 9660 format, there are two lev-els of regulations.

Level 1:

The file name is in 8.3 format (8 characterfile names, with a 3 character file exten-sion. File names must be composed ofone−byte capital letters and numbers. The“_” symbol may also be included.)

Level 2:

The file name can have up to 31 characters(including the separation mark “.” and fileextension). Each folder must contain few-er than 8 hierarchies.

AUDIO/VIDEO SYSTEM

251

m3u—Playlists created using “WINAMP” soft-ware have a playlist file extension (.m3u).

MP3—MP3 is an audio compression standard de-termined by a working group (MPEG) ofthe ISO (International Standard Organiza-tion). MP3 compresses audio data toabout 1/10 the size of that on conventionaldiscs.

WMA—WMA (Windows Media Audio) is an audiocompression format developed by Micro-soft�. It compresses files into a size small-er than that of MP3 files. The decoding for-mats for WMA files are Ver. 7, 8, and 9.

AUDIO/VIDEO SYSTEM

252

2012 Toyota Highlander Audio/Video Information

Automotive

Transcript of 2012 Toyota Highlander Audio/Video Information