2008 CATALOG - gogsg.com€¦ · 2008 CATALOG VOL. XI . ... FAX: (303) 733-2348 CONNECTICUT...

2008 CATALOGVOL. XI

WWW.ICCINK.COM

www.iccink.com13929 East 166th Street, Cerritos, CA 90702-7666

Tel: 1 (562) 926-1010 • Toll Free (US only): 1 (800) 425-4103 • Fax: 1 (562) 926-9486

WELCOME TO INTENATIONAL COATINGS™

For over 50 years, International Coatings™ has been the industry leader in innovative printing products and industrial compounds. Recognized for our consistent quality, outstanding performance and cost-cutting value, our products are used worldwide for direct and transfer applications.

International Coatings’ textile screen printing inks and adhesives have be-come standards in the industry and are recognized world-wide for their out-standing performance, consistency and innovation.

Regarding Phthalate Compliance, International Coatings has been proactive and in many instances, even ahead of regulations governing certain chemi-cals as it steadily moved towards a more eco-conscious product line. Read the latest updates on our website at www.iccink.com or click here.

COMING SOON: Read more on Page 4• PVC-Free High Density Ink• Phthalate-Free High Density Ink• UltraMix® 7900 Low Cure, Phthalate-Free color system ink series

ECO-FRIENDLY: • Gen IV PVC-Free, Phthalate-Free Plastisol Alternative ink series (pg 61)

NEW BASES: (Look for more info soon)• 7050 Opaque Base - a ‘Phthalate Compliant’ opaque mixing base that can be used in many of the popular mixing systems • 3816 Sentri Clear - a soft hand ‘Phthalate Compliant’ mixing base that can be added to any product to dramatically reduce the hand

SPECIAL EFFECTS: • Metallic Shimmers in new Fashion colors (pg 74) PLASTISOL INKS: • Paramount White - For ultimate bleed resistance and coverage (page 33)• 7040 Blocker Gray™ (pg 33) to help stop severe bleeds on polyester fab-rics and• 7038 Cotton Value White (pg 44) a value-priced opaque white.

DIGITAL TRANSFER PRODUCTS: • Forever Digital Transfer Paper (pg 99)

We have also included a new print technique section (see page 111) which we also expanded on our website, at www.iccink.com.

So be sure to check out these new products. Should you have any ques-tions regarding any of our products, technical specs, application, or use, please don’t hesitate to call us at the numbers provided below.

2

3

CONTENTS

This catalog was designed to show International Coatings’ main printing solutions product lines. Check out all that we have to offer. We have been proudly serving the printing industry with superior products, superior qual-ity, and superior customer service for over 50 years. For more information about International Coatings™ and our products, please visit our website at www.iccink.com.

International Coatings™ is available worldwide through our network of dis-tribution partners who are listed on the next page.

We have also included a brief printing “how-to” and short FAQ section at the end of the product listings. If you have more specific questions not covered in our short overview, you may go to our website at www.iccink.com and check our more extensive FAQ section there, or send a question to one of our experts via the form on the website.

Coming Soon: Preview of New Products

International Coatings’ Color Chart

List of U.S. and Worldwide Distributors for Screen Print-ing Inks

Direct Print Plastisol Ink Products

White Plastisol Ink Products

Color Systems Ink Products for PANTONE® color matching

GEN IV PVC-Free, Eco-Friendly Plastisol Alternative

Specialty and Special Effects Ink Products

Discharge System

Transfer Ink Products

INSTA® Heat Seal Machines

FOREVER Digital Transfer Paper Products

Optilux® Reflective System Products

Printing Tips and FAQ

MSDS Declarations



4

5 - 8

9 - 16

17 - 29

30 - 44

47 - 55

56 - 60

61 - 84

85 - 86

87 - 88

89 - 91

93 - 105

106 - 111

112 - 132

133 - 144



NEW PRODUCTS

PARAMOUNT (LOW BLEED) WHITE - AVAILABLE NOW!

What’s so special about our new Paramount White? Quite simply, it is the best low bleed ink we’ve developed or seen on the market. Our new Paramount White is paramount in bleed resistance, quality, performance, printability for low mesh counts and all the other outstanding attributes as-sociated with a great ink. And all of that with no bleaching agents or phtha-lates! “Really?” Really!!!

We have tested our Paramount White against other whites, and it outper-forms them on just about all levels.

• Phthalate Free• Superior bleed resistance • Ideal for low mesh counts• Very opaque and smooth finish• Bright• Fast flash

PVC-FREE HIGH DENSITY INK

PHTHALATE-FREE HIGH DENSITY INK

We’re completing testing on our new Phthalate-Free High Density plastisol ink. The phthalate-free formulation allows printers to use this ink for any jobs that call for phthalate-free or phthalate compliant ink products.

ULTRA MIX 7900 LOW CURE INK SERIES

The new UltraMix® 7900 Low-Cure Color System is a Phthalate-Free plas-tisol ink series that was developed in response to growing customer de-mand for an ink that is more eco-friendly yet offers enhanced performance and the ability to be printed on a wider range of substrates.

Look for our new products soon!

Our lab has been very busy this summer! We are now beta-testing our brand new PVC-Free, Phthalate-Free High Density ink.

We’ll be previewing it at the ISS LB 2009 show. We’ll have samples in the booth.

4

DISTRIBUTOR INFO

For the most updated list of our U.S. as well as International Dis-tributors, please log on to our website at:

www.iccink.com

Click on “Distributor Locator” for a listing of our most current Dis-tributors. Or you can also go directly to that page by typing in:

www.iccink.com/distributorlocator.htm



ALABAMAJones Sportswear1600 2nd Ave SouthBIRMINGHAM, AL 35233-1705(205) 326-6264 (800) 762-0719FAX: (205) 324-9647Web Site: www.jonessportswear.com

ARIZONAMcLogan Supply Company Inc2010 S. Main StreetLOS ANGELES, CA 90007-1420(213) 749-2262 (800) 625-6426FAX: (213) 745-6540Web Site: www.mclogan.com

Sericol Inc (Western Region)1920 Gene Autry WayANAHEIM, CA 92805-6725(714)634-8086FAX: (714)634-4772Web Site: www.fujfilmsericol.com

ARKANSASGraphic Solutions Group304 North WaltonDALLAS, TX 75226-1529(214) 748-3271 (800) 366-1776FAX: (800) 676-0034Web Site: www.txscreen.com

Ryonet Corporation14950 Industrial Park Drive, Suite A LEAD HILLl, AR 72644(800) 314-6390www.silkscreeningsupplies.com

CALIFORNIABC SUPPLY, INC.10025 Siempre Viva Road Suite DSan Diego California 92154

Ph.619-569-6760Fax 619-374-7169Contact [email protected]

Denco Sales Company Inc4634 E. Weathermaker Ave.FRESNO, CA 93703(559) 454-5095 (800) 640-4151FAX: (559) 454-5097Web Site: www.dencosales.com

Denco Sales Company Inc1960 Olivera RoadCONCORD, CA 94520-5491(925) 822-0000 (877) 443-3626FAX: (925) 798-5296Web Site: www.dencosales.com

McLogan Supply Company Inc711 S. East StreetANAHEIM, CA 92805-4845(714) 999-1194FAX: (714) 999-0195Web Site: www.mclogan.com

McLogan Supply Company Inc2010 S. Main StreetLOS ANGELES, CA 90007-1420(213) 749-2262 (800) 625-6426FAX: (213) 745-6540Web Site: www.mclogan.com

McLogan Supply Company Inc21051 Superior St.CHATSWORTH, CA 91311(818) 718-0888(818) 718-7008Web Site: www.mclogan.com

US DISTRIBUTORS

9

McLogan Supply Company Inc345 16th StreetSAN DIEGO, CA 92101-7605(619) 595-0270FAX: (619) 595-0278Web Site: www.mclogan.com

Nazdar West 11821 Western AvenueGARDEN GROVE, CA 92841-2119(714) 894-7578 (800) 252-7767FAX: (714) 891-7875Web Site: www.nazdar.com

Ryonet Corporation11800 NE 60th WayVANCOUVER, WA 98682(800) 314-6390Fax: (360) 546-1454www.silkscreeningsupplies.com

Sericol Inc (Western Region)6200 Phyllis DriveCypress, CA 90630-5239(714) (800) 255-4562FAX: (913) 342-4752Web Site: www.fujfilmsericol.com

COLORADODenco Sales Company Inc.55 South YumaDENVER, CO 80223-1127(303) 733-0607 (800) 232-0607FAX: (303) 733-2348

CONNECTICUTCommercial Screen Supply6 Kiddie DriveAVON, MA 02322-1127(508) 583-2300 (800) 227-1449FAX: (508) 583-8234

Garston Screen Printing Supplies110 Batson DriveMANCHESTER, CT 06040-1694(860) 649-9626 (800) 966-9626FAX: (860)289-3005Web Site: www.garston.com

FLORIDANazdar Florida13160 Northwest 43rd Ave

OPA LOKA, FL 33054(800) 788-0554FAX: (305) 882-0003Web Site: www.nazdar.com

Mel-Ray Industries2167 S US Hwy 17Crescent City, FL 32112(800) 367-8834Fax (800) 201-3884 www.melray.com

GEORGIAInternational Coatings Company116 Callahan RD SEDALTON, GA 30721-4989(706) 277-7794 (800) 553-6829FAX: (706) 277-7803Web Site: www.iccink.com

Nazdar Atlanta4260 Peachtree Industrial Blvd.NORCROSS, GA 30071-1303(770) 476-0510 (800) 537-4606FAX: (770) 623-0297Web Site: www.nazdar.com

IDAHODenco Sales Company Inc605 E. 46th StreetBOISE, ID 83714-4719(800) 338-2608FAX: (208) 375-0103www.deconsales.com

ILLINOISAtlas Screen Supply Company9353 Seymour AveSCHILLER PARK, IL 60176(847) 233-0515 (800)621-4173 FAX: (847) 233-0506Web Site: www.atlasscreensupply.com

Nazdar Cincinnati3904 Port Union RoadFairfield, OH 45014-2204(513) 870-5706 (800) 729-9942FAX: (513) 870-5713Web Site: www.nazdar.com



US DISTRIBUTORS (cont’d)

10




11

Nazdar Midwest 1982 Lunt AvenueELK GROVE VILLAGE, IL 60007-5604(847) 439-8668 (800) 837-0234FAX: (847) 437-7472Web Site: www.nazdar.com

INDIANANazdar Indiana 345 South Post Rd.INDIANAPOLIS, IN 46219(317) 263-3883 (800) 733-9942FAX: (317) 263-3881Web Site: www.nazdar.com

IOWAScreen Printing Supplies Inc1450 N.E. 69TH Place #53ANKENY, IA 50021(763) 591-1253 (800) 876-7774FAX: (763) 557-1055Web Site: www.sps-i.com

Sericol Inc1101 Cambridge Circle DriveKANSAS CITY, KS 66103-1311(913) 342-4060 (800) 255-4562FAX: (913) 342-4752Web Site: www.fujfilmsericol.com

KANSASSericol Inc1424 AtlanticKANSAS CITY, MO 64116(913) 342-4060 (800) 255-4562FAX: (913) 342-4752

Nazdar Shawnee8501 Hedge Lane TerraceSHAWNEE, KS 66227-3290(800) 537-8618FAX: (800) 647-7903Web Site: www.nazdar.com

KENTUCKYNazdar Cincinnati3904 Port Union RoadFairfield, OH 45014-2204(513) 870-5706 (800) 729-9942FAX: (513) 870-5713Web Site: www.nazdar.com

LOUISIANAGraphic Solutions Group304 North WaltonDALLAS, TX 75226-1529(214) 748-3271 (800) 366-1776FAX: (800) 676-0034Web Site: www.txscreen.comMARYLANDCharles M. Jessup Company Inc177 Smith StreetKEASBEY, NJ 08832-1158(732) 324-0430 (800) 525-4657FAX: (732)324-1616

Pioneer Supply Company Inc1840 Forbes AvenuePITTSBURGH, PA 15219-5836(412) 471-5600 (800) 545-2233(800) 422-4378 PAFAX: (412) 471-7446Web Site: www.pioneersupply.com

Tex Source702 Cleveland AvenueKINGS MOUNTAIN, NC 28086-2510(704) 739-9612FAX: (704) 739-9688Web Site: www.texsourceonline.com

MASSACHUSETTSCommercial Screen Supply6 Kiddie DriveAVON, MA 02322-1127(508) 583-2300 (800) 227-1449FAX: (508) 583-8234

Garston Screen Printing Supplies21 Parkridge RoadHAVERHILL, MA 01835(978) 658-7448 (800) 328-7775FAX: (978) 374-9777Web Site: www.garston.com

MICHIGANDesmond Process Supply2277 ElliottTROY, MI 48083-4502(248) 589-9100 (800) 968-1115FAX: (248) 589-0038Web Site: www.desmondpro.com




12

Nazdar Cincinnati3904 Port Union RoadFairfield, OH 45014-2204(513) 870-5706 (800) 729-9942FAX: (513) 870-5713Web Site: www.nazdar.com

Nazdar Michigan687 Minnesota AvenueTROY, MI 48083-6202(248) 588-4900 (800) 733-9942 (MI)FAX: (248) 588-0370Web Site: www.nazdar.com

MINNESOTAScreen Printing Supplies Inc9825 85th Ave. Suite 100MAPLE GROVE, MN 55369(763) 391-7390(763) 391-7392Web Site: www.sps-i.com

MISSISSIPPIGraphic Solutions Group304 North WaltonDALLAS, TX 75226-1529(214) 748-3271 (800) 366-1776FAX: (800) 676-0034Web Site: www.txscreen.com

MISSOURILawson Screen Products (900 Series Nylon Inks Only)5110 Penrose StreetST. LOUIS, MO 63115-1279(314) 382-9300 FAX (314) 382-3012Web Site: www.lawsonsp.com


MONTANADenco Sales Company Inc605 E. 46th StreetBOISE, ID 83714-4719(208) 375-0100 (800) 338-2608FAX: (208) 375-0103Web Site: www.dencosales.

NEBRASKADenco Sales Company Inc55 South YumaDENVER, CO 80223-1127(303) 733-0607 (800) 232-0607FAX: (303) 733-2348Web Site: www.dencosales.com

Screen Printing Supplies Inc9825 85th Ave. Suite 100MAPLE GROVE, MN 55369(763) 391-7390(763) 391-7392(800)876-7774Web Site: www.sps-i.com


NEW JERSEYCharles M. Jessup Company, Inc177 Smith StreetKEASBEY, NJ 08832-1158(732) 324-0430 (800) 525-4657FAX: (732) 324-1616

Nazdar Pennsauken7055 Central HighwayPENNSAUKEN, NJ 08109-(856) 663-7878 (800) 257-8226FAX: (856) 663-9467Web Site: www.nazdar.com

NEW MEXICODenco Sales Company Inc2211 Commercial, NEALBUQUERQUE, NM 87102(800) 232-0607Web Site: www.dencosales.com

NEW YORKCharles M. Jessup Company, Inc177 Smith StreetKEASBEY, NJ 08832-1158(732) 324-0430 (800) 525-4657FAX: (732) 324-1616




M&R Sales & Service155 Sherwood AveFARMINGDALE, NY 11735-1717(800) 729-3338 (631) 293-0063FAX: (631) 293-0098www.mrprint.com

UPSTATE NEW YORKCommercial Screen Supply6 Kiddie DriveAVON, MA 02322-1127(508) 583-2300 (800) 227-1449FAX: (508) 583-8234

Davis International1225 Clifford AveROCHESTER, NY 14621-14621(716) 546-6421FAX: (716) 546-6426

NORTH CAROLINANazdar Greensboro7001 C Cessna DriveGREENSBORO, NC 27409-9329(336) 668-4085 (800) 426-0290FAX: (336) 668-4174Web Site: www.nazdar.com

Tex Source714 N. Cleveland AvenueKINGS MOUNTAIN, NC 28086(704) 739-9612FAX: (704) 739-9688Web Site: www.texsourceonline.com

NORTH DAKOTAScreen Printing Supplies Inc9825 85th Ave. Suite 100MAPLE GROVE, MN 55369(763) 391-7390(763) 391-7392Web Site: www.sps-i.com

OHIONazdar Cincinnati3904 Port Union roadFairfield, OH 45014-2204(513) 870-5706 (800) 729-9942FAX: (513) 870-5713Web Site: www.nazdar.com

OKLAHOMAGraphic Solutions Group6731 S. Eastern AveOKLAHOMA CITY, OK 73149-5218(405) 672-0555 (800) 677-3149FAX: (405) 677-1430Web Site: www.txscreen.com

OREGONDenco Sales Company Inc13209 NE David CirclePORTLAND, OR 97230(503) 235-0460 (800) 345-0172(800) 345-0762 (OR)FAX: (503) 235-0468Web Site: www.dencosales.com


PENNSYLVANIANazdar Cincinnati3904 Port Union roadFairfield, OH 45014-2204(513) 870-5706 (800) 729-9942FAX: (513) 870-5713Web Site: www.nazdar.com

Pioneer Supply Company, Inc1840 Forbes AvenuePITTSBURGH, PA 15219-5836(412) 471-5600(800) 422-4378 (PA)FAX: (412) 471-7446Web Site: www.pioneersupply.com

PENNSYLVANIA (Eastern)Charles M. Jessup Company, Inc177 Smith StreetKEASBEY, NJ 08832-1158(732) 324-0430 (800) 525-4657FAX: (732) 324-1616

13




SOUTH CAROLINANazdar Greensboro 7001 C Cessna DriveGREENSBORO, NC 27409-9329(336) 668-4085 (800) 426-0290FAX: (336) 668-4174Web Site: www.nazdar.com


SOUTH DAKOTAScreen Printing Supplies Inc9825 85th Ave. Suite 100MAPLE GROVE, MN 55369(763) 391-7390(763) 391-7392Web Site: www.sps-i.com

TENNESSEENazdar Cincinnati3904 Port Union roadFairfield, OH 45014-2204(513) 870-5706 (800) 729-9942FAX: (513) 870-5713Web Site: www.nazdar.com

TEXASGraphic Solutions Group304 North WaltonDALLAS, TX 75226-1529(214) 748-3271 (800) 366-1776FAX: (800) 676-0034Web Site: www.txscreen.com

Graphic Solutions Group4466 West 12th StreetHOUSTON, TX 77055-7208 (713) 957-0850FAX: (713)957-0310Web Site: www.txscreen.com

UTAHDenco Sales Company Inc55 South YumaDENVER, CO 80223-1127(303) 733-0607 (800) 232-0607FAX: (303) 733-2348Web Site: www.dencosales.com

VIRGINIANazdar Greensboro 7001 C Cessna DriveGREENSBORO, NC 27409-9329(336) 668-4085 (800) 426-0290FAX: (336) 668-4174Web Site: www.nazdar.com


WASHINGTONDenco Sales Company Inc711 S FidalgoSEATTLE, WA 98108-2615(206) 764-9180 (800) 334-3406FAX: (206) 764-9214Web Site: www.dencosales.com


WEST VIRGINIANazdar Cincinnati3904 Port Union roadFairfield, OH 45014-2204(513) 870-5706 (800) 729-9942FAX: (513) 870-5713Web Site: www.nazdar.com

14

15www.iccink.com

13929 East 166th Street, Cerritos, CA 90702-7666Tel: 1 (562) 926-1010 • Toll Free (US only): 1 (800) 425-4103 • Fax: 1 (562) 926-9486


INTERNATIONAL DISTRIBUTORS

WISCONSINScreen Printing Supplies IncN-19 W6725 Commerce Ct.Cedarburg, WI 53012(262) 387-9930 (800) 546-7774FAX: (262) 387-9940Web Site: www.sps-i.com

WYOMINGDenco Sales Company Inc605 E. 46th StreetBOISE, ID 83714-4719(800) 338-2608FAX: (208) 375-0103Web Site: www.dencosales.com

CAMBODIACOLOURTEX LTD.No.3 Confederation of RussiaSangkat Tuk Thia, Khan Russey KeoPHNOM PENH, CAMBODIA(855) 23 995 039

CANADAWILLOX GRAPHICS3104 South East MarineVANCOUVER, BRITISH COLUMBIAV5S2H4 CANADA(604) 255-7725(800) 561-8844FAX: (604) 255-0676 (800) 318-8844www.wilox.com

AMORIN DESIGN30 Lynnhaven RoadNORTH YORK, ONTARIOM6A-2KB CANADA(416) 784-3851FAX: (416) 784-5679Web Site: www.amorin.ca

PRO-SCHEM INC.620 Meloche Ave.DORVAL, QUEBECH9P-2P4 CANADA(514) 636-0522FAX: (514) 636-2028

CHINASHANGHAI JING SHI INDUSTRIES CO., LTDHonghui BuildingNo. 468 Cao Xi RoadRoom 903-904SHANGHAI, CHINA 20003086-21-64270658FAX: 86-21-34241630

GUANGZHOU ARTOL TRADING CO., LTD. Suite 716-718, Guangkong Building, South WingNo. 931 Renmin Road NorthGUANGZHOU 510010, CHINA+86 (20) 3633-9970, 3633-9971FAX: +86 (20) 3633-9876Web Site: www.artrend.com

ARTREND HOLDINGS LTD.1/F., SUI ON INDUSTRIAL BLDNG.134 Wai Yip StreetKwun Tong, KowloonHONG KONG852 2304-1363(fax) 852 2304-7128www.artrend.com

EGYPTFONON SCREEN CO.BLOT 20 BLOCK 20024 El Oboor City Western Extension, Cairo EGYPTTel/Fax: 011 202 466 51 260Email: [email protected]

FRANCEA. BUISINE78 Rue Felix Faure92700 ColombesFRANCEContact: Mr. Arnaud BuisineTel.: +(33) 1 41 19 29 74Fax: +(33) 1 47 85 82 10

16



INTERNATIONAL DISTRIBUTORSGUATEMALASOPORTE SERIGRAFICO, S.A. 2a. Calle 16-53 Zona 4 de MixcoColonia Valle del Sol Bodega “A”GUATEMALA, C.A.(502) 431-2741(502) 432-3964(502) 439-0198

KOREATAEMYUNG PROCESS SUPPLY255-2 Ulchiro 4GAJOONG KU, SEOUL(02) 2266-0424/5Fax: (02) 2276-0424MALAYSIAKHAI LIEN SILK SCREEN SUPPLIER 36 Jalan P10/21Seksyen 10, Taman Industri Selaman43650 Bandar Baru Bangi, Salengor, Malaysia+(60)3-8922 2988FAX: +(60)3-8922 2773Web Site: www.khailien.com.my

MEXICOPSNAV OCAMPO #2021-7 Z CENTROTIJUANA, B. C. NORTE MEXICO 22000+(91 )-66-840258FAX: (91)66341691

ABSCREEN-TEX Calle 36-A No 5 Col. Santa Rosa Delg. Gustavo A. Madero Mexico, D.F. +(53) 67-52-61 53-92-38-84 Fax: (53) 67-23-41 Web Site: www.graphictexab.com.mx

BC SUPPLY De MEXICO S.A de C.V.Prolongacion M, Juarez 1089-8Col. Linda Vista, Tijuana CP. 22054Ph. 01152664-6373013 Fax 619-374-7169Nextel 122*588844*9Contact [email protected]

NETHERLANDS / HOLLANDTRANSMARKO SILKSCREEN SER-VICESKRUISBMK 292165 AJ LISSERBROEK NETHER-LANDS(31) 252-418314 373584FAX: (31) 252-419395

PHILIPPINESNESTOR DISTRIBUTORS1819 Dominga StreetPASAY CITY, 1300PHILIPINES63 2404 1686SOUTH AFRICACHEMOSOL (Pty) Ltd.22 Trump StreetSelbyJohannesburgSouth Africa+ 27 11 493-3686Fax: + 27 11 493-0164Web Site: www.chemosol.co.za

SPAINSEINSE KENT, S.L.Poligono Industrial La MinaAv. Alqueria de Mina, 33 46200 PaiportaValencia, Spain34 963 972 832Fax: 34 963 972 833

THAILANDSCALA SILKSCREEN CO., LTD.849/46-49 Soi Chula 6 Rama Road(BANTHADTHONG) PATHUMWANBANGKOK THAILAND. 10330(662) 2159865, 6124128-9FAX: (662) 2159777Web Site: www.scala99.com

VIETNAMKHAI LIEN SILK SCREEN SUPPLIER 36 Jalan P10/21Seksyen 10, Taman Industri Selaman43650 Bandar Baru Bangi, Salengor, Malaysia+(60)3-8922 2988FAX: +(60)3-8922 2773Web Site: www.khailien.com.my

17

INTERNATIONAL COATINGS™ DIRECT PRINT PLASTISOL INKS

International Coatings™ has the field covered in direct print plastisol inks, from puff to athletic multipurpose.

Our high quality inks are formulated to perform to the highest stan-dards.

Used for direct printing, cold-peel transfers, hot-peel transfers (with the addition of 500 Quick-Trans Additive) and as a flock adhe-sive

Standard colors for light fabrics, HP for dark colors

Specially formulated for printing on tough-to-print Nylon fabrics

For printing directly on most nylon athletic garments

High Performance plastisol for ultra high speed automatic printing



Multipurpose Series

700 Series

900 Series for Nylon

1100 Series for Athletic Fabrics

7600 Series

MULTIPURPOSE SERIES

These100% solids plastisol inks are specially formulated and can be used for direct printing, cold-peel transfers, hot-peel transfers (with the addition of 500 Quick-Trans Additive) and as a flock adhesive.

They are available in more than 40 standard colors, including 15 pre-mixed metallics and glitters. A litho backing white is also available for this series.

This ink works best on 100% cotton or white or light-colored cotton/poly-ester blends.

This series is available in the following colors below:

18



19

MULTIPURPOSE SERIES PLASTISOL

700 SERIES LF PLASTISOL INKS

The 700 Series includes a versatile selection of high-pigment (HP) colors for dark fabrics, standard colors for light fabrics and a soft-hand additive that can be mixed with the inks to soften the feel of a print.

The economically priced 700 series produces excellent results in almost any printing situation.This series is available in the following colors below:

20



700 SERIES PLASTISOL INKS

21

900 SERIES LF NYLON

When it comes to hard-to-print nylon, International Coatings™’ 900 series inks are recognized as the industry’s best. For over 30 years, this product has been an industry favorite.

They are fast-flashing, two-part ink systems specifically formulated for printing on nylon.

As easy to use as conventional plastisols, they are also just as du-rable.


22



900 SERIES NYLON INK

23

24



1100 SERIES LF ATHLETIC

Very durable, high-viscosity plastisols formulated for printing directly on most nylon athletic garments, International Coatings™’1100 Se-ries inks also can be used for cold-peel transfers and as a flock ad-hesive.

Available colors match the most popular colors used for athletic gar-ment printing.

This series can be used directly from the container or for greater ad-hesion to nylon mesh fabrics, can be mixed with the 900 LF Catalyst (sold separately).


1100 SERIES ATHLETIC MULTIPURPOSE

25

7600 SERIES LF HIGH PERFORMANCE

This 7600 series was especially formulated for high performance during ultra high speed automatic printing processes.

The ink is very creamy and short bodied, with low tack and for ease of printing, a greatly improved shear.

Product is well suited for high definition and resolution, fine detail and half-tone printing.

The 7600 series is available in the colors as shown on the chart below:

26



7600 SERIES HIGH PERFORMANCE

27

PLASTISOL INK ADDITIVES

28

PLASTISOL INK REDUCERS

29

WHITE PLASTISOL INKS

White inks of the highest quality are critical to screen printers. They are the day-to-day workhorse of the industry, and Interna-tional Coatings recognizes their importance with an eye to deliver-ing a range of the finest white plastisol inks available.

International Coatings’ whites are formulated to give excellent printability across a range of screen printing applications.

None of our whites contain bleaching agents or emit any objec-tionable odors.

To find the best white ink for your specific needs, please refer to our handy comparison chart on the following pages for easy reference. You will find a variety of white ink products, including opaque, high pigment, tinting whites, and low bleed products.

7041 Paramount White - Paramount’s outstanding bleed blocking capabilities and other attributes, such as printability and opacity, make it our best ever white ink and quite possibly – in our opinion – the best white ink in the market.

7041 Paramount White’s superior attributes include: � Ultra low bleed � Phthalate-free formulation (PF)� Excellent opacity� Very fast flash� Low cure (300°F to 325°F)� Ideal for low and high mesh counts� Non-ghosting � No bleaching agents� Creamy viscosity

The 7041 Paramount White is in stock now. Try it today! You will be impressed.

30

NEW



WHITE INK COMPARISONS

31

WHITE INK COMPARISONS - CONT’D

32

7041 Ultra Low-Bleed Paramount White offers superior bleed resistance, outstanding print performance, very fast flash, excellent opacity and a soft hand. It is ideal for high and low mesh counts, and unlike other com-petitive inks, Paramount White contains no bleaching agents, does not ghost and is phthalate free.

7041 Paramount White is the best bleed-blocking and best performing white ink we have developed to date, and we believe it is the ultimate low bleed, non-ghosting white in the market. International Coatings customers agree. Large printers who beta-tested the ink say that 7041 Paramount White is superior to the other white inks they have worked with. They remarked on how well 7041 Paramount White works on short and long production runs, and at fast production speeds.

7041 Paramount White’s superior attributes include:

Ultra low bleed

Phthalate-free formulation (PF)

Excellent opacity

Very fast flash

Low cure (300°F to 325°F or 140°C - 160°C)

Ideal for low and high mesh counts

Non-ghosting

No bleaching agents

Creamy viscosity

7041 Paramount White can be printed on cotton/poly blends, polyester, and 100% cotton fabrics.

Order 7041 Paramount White today and test it for yourself! 7041 Paramount White is available through Inter-national Coatings’ exclusive network of distributor companies.

Contact us at 1 (800) 423-4103 (within the U.S. only) or 1 (562) 926-1010, or visit www.iccink.com for more information.

www.iccink.comInternational Coatings, 13929 E. 166th St., Cerritos, CA 90703

Toll-Free U.S. (800) 423-4103 or (562) 926-1010 • Fax (562) [email protected]

33

www.iccink.comInternational Coatings, 13929 E. 166th St., Cerritos, CA 90703

Toll-Free U.S. (800) 423-4103 or (562) 926-1010 • Fax (562) [email protected]

SPOT FLASHINGThis product will spot dry, with very low after flash tack, in 2 to 8 seconds depending on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should just be dry to the touch, with no lift off, but not be totally fused. Totally fusing the underprint white may cause intercoat adhesion problems with the inks printed on top of the white ink. Final fusing or curing should occur in the dryer.

IMPORTANT INFORMATION

1. 7041LF Paramount White is an ultra low bleed ink, not a non-bleed ink. Bleeding or dye migration may still occur on some types of fabric. Always test print the fabric to be printed before beginning production. It is best to perform long term testing on fabrics to be used to determine if they are going to bleed. Bleeding or dye migration may not occur right away.

2. 7041LF Paramount White is phthalate free and should not be modified or come in contact with any product not recommended for the ink. Any addition of products or contact by products other than those recommended can contaminate the ink and it may no longer be phthalate free. Make sure that all mixing spatulas, mixing blades, squeegees, flood bars and screens are thoroughly cleaned (free of inks or materials which may contaminate the phthalate free product) before every use.

3. Excessive squeegee pressure, when using 7041LF Paramount White, will drive the ink through the fabric, making the ink look lessopaque. Adding too much reducer will also cause loss of opacity.

Recommendations and statements made are based on International Coatings’ research and experience. Since International Coatings does not have any control over the conditions of use or storage of the product sold, International Coatings cannot guarantee the results obtained through use of its products. All products are sold and samples given without any representation of warranty, expressed or implied, of fitness for any particular purpose or otherwise, and upon condition that the buyer shall determine the suitability of the product for its own purpose. This applies also where rights of third parties are involved. It does not release the user from the obligation to test the suitability of the product for the intended purpose and application.

FEATURES7041LF* Paramount Ultra Low Bleed (LB), Phthalate Free (PF) White is a low fusing, fast flashing, low tack, high pigment plastisolbased screen printing ink. 7041LF has a creamy viscosity and is very easy to print. As a result, less pressure is needed to print 7041LF through the screen.7041LF contains no bleaching agents and offers superior performance relative to other low bleed inks.

Application & Storage Information

RECOMMENDED FABRICS Cotton/polyester blends, polyester and 100% cotton. Always test print fabric for possible dye migration before beginning a production run.

INK APPLICATION 7041LF LB PF White should be used from the container without any modifications. If thinning is required, use 1% to 5% by weight 7999LF LB Curable Low Bleed Reducer. Using other reducers or additives may lower the bleed resistance and/or opacity of the ink. Adding too much reducer will cause loss of opacity.

SCREEN MESH AND EMULSION

60-305 t/in or 24-120 t/cm Monofilament Use 110-305 t/cm or 43-120 t/cm Monofilament for under basing Any direct or indirect solvent resistant emulsion. Use 35 to 70 micron capillary film for best results.

SQUEEGEE 65-70 Durometer: Sharp Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp Edge

CURE TEMPERATURES 300°F to 325°F (149°C to 160°C) entire ink film.

CLEAN-UP Any environmentally friendly plastisol screen wash.

PRODUCT PACKAGING Quart, 1 Gallon, 5 Gallon, or 30 Gallon Containers.

STORAGE OF INK CONTAINERS

Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed.

PRODUCT MSDS Refer to material safety data sheet MSDS17-7041.

13929 East 166th Street • Cerritos, California, USA 90702-7666 • Tel (562) 926-1010 • Fax (562) 926-9486 • www.iccink.com

*LF (Lead Free) Contains less than 90 ppm lead.

34

35



7040 BLOCKER GRAY™

7040 Blocker Gray™, a bleed blocking phthalate-free plastisol under-base for use on 100% polyester or other textile fabrics where dye mi-gration is a severe problem. The new 7040 Blocker Gray™ was devel-oped in response to growing customer demand for an underbase ink that could help prevent dye migration during production on bleed-prone textiles.

7040 Blocker Gray’s unique chemistry makes it highly resistant to bleed, prevents fabric dye migration in almost all situations, and helps build greater opacity. When overprinted with white or colored inks, 7040 Blocker Gray™ preserves the brilliance of the whites and colors, and maximizes the details of the design.

7040 Blocker Gray™ is a high performance ink that prints easily and flashes quickly.

MODIFYING INK Modification of the 7040 LF Blocker Gray™ is not recommended as any modification to the ink may lessen the bleed resistance of this product. Always test for wash fastness before beginning a production run. SPOT FLASHING 7040 LF Blocker Gray™ will spot dry, with very low after flash-tack, in 3 to 8 seconds depending on the spot dryer used. Too much heat / time may cause the ink to become sticky after flashing. Adjust flash unit accordingly. When spot drying, the ink should be just dry to the touch, with no lift off, but not totally fused. Totally fusing the ink may cause inter-coat adhesion problems with the inks printed on top of the flashed ink. Final curing I fusing should occur in the dryer. BLEED RESISTANCE 7040LF Blocker Gray™ is formulated to give maximum bleed resistance when printing on 100% polyester or cotton/polyester blends. Blocker Gray™ should help to prevent dye migration or bleeding on most fabrics when used as directed. In testing, even the use of cotton white inks printed on top of the 7040LF Blocker Gray™, have not shown bleeding or dye migration when used on polyester fabrics. IMPORTANT INFORMATION 1. 7040 LF Blocker Gray™ is a maximum bleed resistant ink, but on some problem fabrics it may be possible for bleeding or dye migration to occur. Always test for possible dye migration before beginning a production run. Bleeding or dye migration may not occur right away. 2. Always stir the 7040LF Blocker Gray™ before using. 3. It is very important that 7040LF Blocker Gray™ is exactly registered with any white or other color that is printed on top of the Blocker Gray™ in order to help insure maximum bleed resistance of the top color. If the color printed on top of Blocker Gray™ overlaps the Blocker Gray™ in any spot, that spot may show bleeding or dye migration. 4. Use an opaque ink or heavier ink deposit on top of the Blocker Gray™ to cover the Blocker Gray™ properly. 5. t is extremely important to keep 7040 Blocker Gray™ from getting too hot in storage. Temperatures above 90°

7040

Blo

cker

Gra

y™

Recommendations and statements made are based on International Coatings’ research and experience. Since International Coatings does not have any control over the conditions of use or storage of the product sold, International Coatings cannot guarantee the results obtained through use of its products. All products are sold and samples given without any representation of warranty, expressed or implied, of fitness for any particular purpose or otherwise, and upon condition that the buyer shall determine the suitability of the product for its own purpose. This applies also where rights of third parties are involved. It does not release the user from the obligation to test the suitability of the product for the intended purpose and application. All trademarks noted herein are either the property of International Coatings, Pantone, Inc. or their respective companies.

FEATURES 7040 LF* Blocker Gray bleed resistant under base ink. Excellent low bleed properties. Use to help block dye migration on problem fabrics that contain polyester. High Pigmented, very opaque ink. Phthalate Free product.


RECOMMENDED FABRICS 100% polyester or cotton/polyester blends. Use as an under base for printing on dark or light colored polyester fabrics.

INK APPLICATION Blocker Gray™ must be printed without any modifications in order to maintain the best bleed resistance of the product. Thinning of this product is not recommended.


83 to 160 t/in or 32 to 63 t/cm Monofilament Any direct or indirect lacquer resistant emulsion. 100 to 200 Micron Capillary Film


CURE TEMPERATURES 325°F (163°C) Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.


PRODUCT PACKAGING 1 Gallon, 5 Gallon, or 30 Gallon Containers.



PRODUCT MSDS Refer to Material Safety Data Sheet MSDS8

Very creamy, short bodied ink, with low tack for ease of printing. For use on 100% polyester or cotton/polyester blends.

*LF (Lead Free) Contains less than 0.025% lead.


7040 BLOCKER GRAY™

36

711 LO-BLEED HP WHITE

37


38

741 ULTRA LO-BLEED WHITE

39


40

771 & 774 LOW VISCOSITY LB WHITE

41

SPOT FLASHING Ultra White 7031 LF will spot dry, with a very low after flash tack, in 2 to 8 seconds depending on the spot dryer used. Too much heat/time may cause the ink to become sticky after flashing. Adjust flash unit accordingly. When spot drying, the underbase ink should just be dry to the touch with no lift-off, but not totally fused. Totally fusing the underbase ink may cause inter-coat adhesion problems with the inks printed on top of the underbase. Final curing will occur in the dryer.

IMPORTANT INFORMATION 1. Ultra White 7031 LF is a low bleed ink, not a non-bleed ink. On some types of fabrics, bleeding or dye migration may occur.

Always test print the fabric to be printed before beginning production. It is best to do some long term testing on some fabrics to determine if they are subject to dye migration. Bleeding or dye migration may occur right away.

2. Excessive squeegee pressure will drive the Ultra White 7031 LF through the fabric being printed, making the ink look less opaque. Adjust squeegee pressure, angle and off-contact to insure proper shear and laydown of printed ink. Proper settings of squeegee, flood bar and off-contact will improve performance, improve screen life and squeegee durability.

3. Adding too much reducer or other additives to the Ultra white 7031 LF may also cause loss of opacity or other problems. 4. Ultra White 7031 LF is very easy to print when compared to other white inks and can be printed through finer mesh counts

while still maintaining great opacity. This means less ink usage and faster production times, a real money saver. Using finer mesh counts also means a softer hand on the finished product.

70

31

UL

TR

A W

HIT

E


FEATURES Ultra White 7031 LF is a High Performance, High Pigment (HP), Low Bleed (LB) White plastisol formulated for Ultra High speed automatic printing. The ink is very creamy, short bodied, low tack with greatly improved shear for ease of printing. Ultra White 7031 LF is a high opacity ink that is optically very bright. Ultra White 7031 LF is well suited for high definition and resolution, fine detail and halftone printing. It will deliver faster production speeds with less pres-sure, and can be printed through finer mesh counts.


RECOMMENDED FABRICS For use on light or dark colored polyester, cotton/polyester blends and 100% cotton.

INK APPLICATION Ultra White 7031 LF should be printed right from the container without any modifications. If thinning is needed, use 1099 LF LB Lo-Bleed Reducer (1% to 5% by volume).


60-305 Monofilament Use 160-305 Monofilament for under basing Any direct or Indirect Lacquer Resistant Emulsion. Use 35—70 Micron Capillary Film for Best Results


DRYER TEMPERATURE 320°F (160°C)

CLEAN-UP Mineral Spirits or any environmentally friendly plastisol screen wash.



Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight or in extreme temperature conditions. Keep containers well sealed.

PRODUCT MSDS Refer to material safety data sheet MSDS8.



7031 ULTRA WHITE

42

7032 HP COTTON WHITE

43


44

7034 ULTRA WHITE FF

45

SPOT FLASHINGSPOT FLASHINGSPOT FLASHINGSPOT FLASHING

IMPORTANT INFORMATIONIMPORTANT INFORMATIONIMPORTANT INFORMATIONIMPORTANT INFORMATION

HP

CO

TT

ON

H

ITE

FEATUREFEATUREFEATUREFEATURESSSS

RECOMMENDED FABRICS

INK APPLICATION


SQUEEGEE

DR ER TEMPERATURE

CLEAN-UP

PRODUCT PACKAGING


PRODUCT MSDS

7038 COTTON VALUE-WHITE

46

COLOR SYSTEMS

When PANTONE® color matching is key, International Coatings™ has the solutions. Our Color System series are specifically formulated to provide sim-ulations of the PANTONE® color standards.

Our PANTONE® color systems offer tough, durable inks that will look great longer.

In our Color System series, we offer opaque inks designed for printing on dark-colored fabrics, high performance inks ideally suited for high-speed au-tomatic printing, inks for printing on nylon and athletic fabrics, and our NEW environmentally friendly PVC free inks! We make it easy for you to find exactly what you need.

International Coatings™ has developed a PANTONE® color matching soft-ware program to be used with our UltraMix® line of products, to enable you to match your colors easily. The PC- and Mac-compatible ink management software program contains all the color formulations. The software is in-cluded with our UltraMix® color system products.

47



800 SERIES LF OPAQUE

The 800 Series is designed to make opaque simulations of PANTONE®

colors for dark-fabric printing.

The system consists of nine highly pigmented, ready-for-use, low-bleed primary colors, plus black and white.

The inks are very creamy, low-fusing, fast-flashing, and easy to print. All the colors in the 800 System are lead-free, do not contain any bleaching agents and emit minimal odor.

See available colos below:

48



800 SERIES LF OPAQUE

49

UltraMix® 7400 LF

International Coatings™ introduces its UltraMix® 7400 Color Sys-tem, a high performance, low bleed plastisol, formulated for high speed automatic printing.

Economically priced and easy to use, UltraMix® 7400 inks offer faster wet-on-wet production speeds with less pressure and ex-tremely low ink build-up. The ink is very creamy and short-bodied, with low tack and for ease of printing, a greatly improved shear.

The color matching system consists of 15 intermixable colors that enable printers to simulate PANTONE® colors on white and dark (with white underlay) fabrics.

51



UltraMix® 7400 COLOR SYSTEM

52

UltraMix® 9000 LF NYLON

The UltraMix® 9000 Color System for nylon is formulated to provide simulations of the PANTONE® Color Standards for light- and dark-colored nylon fabrics. UltraMix® 9000 are fast-flashing, two-part plastisol-based inks spe-cifically formulated for printing on normally hard-to-print nylon. Ul-traMix® 9000 colors are also well suited for fine-detail and halftone printing.

See below for available colors:

53



UltraMix® 9000 NYLON COLOR SYSTEM

54

GEN IV Series

We are pleased to announce the much anticipated launch of our PVC-free, Phthalate-free, eco-friendly GEN IV Series inks. GEN IV series inksare unique. Unlike other eco-friendly inks, GEN IV inks are creamy andfull-bodied, and offer the coverage, opacity and performance of plastisols. GEN IV was developed to provide optimal performance on both manual and automatic printers.

GEN IV inks do not dry on the screen and cleanup is simple – all that’s needed is water. No harsh solvents or chemicals are necessary!

We have run extensive tests on GEN IV inks in our tech center. We lovethe soft hand and coverage it gives even on dark garments.

Initial GEN IV Product Line Details

In addition to being PVC-free and Phthalate-free, GEN IV does not contain any heavy metals or other harmful materials. GEN IV has been tested byindependent labs and certified as meeting Oeko-Tex standards. You can view the certificates on our website or by clicking here.

GEN IV’s initial product line consists of 19 primary colors and several spe-cialty inks. The colors can be used as stock printing colors or as color primaries in the GEN IV color matching system. The initial line of GEN IV specialty inks include a Clear Base, Puff Additive, Foil/Transfer Adhesive,and a Glitter Base. For a short video demo, visit our website at www.iccink.com.

The Tiger prints below were printed through the same screens, one using Plastisol inks, the other GEN IV Series inks and were printed the same way. Can you tell which one was printed with which inks?


Tel: 1 (562) 926-1010 • Toll Free (US only): 1 (800) 425-4103 • Fax: 1 (562) 926-9486 58

Answer: Tiger on the right was printed with GEN IV inks

Here are actual scans of the color palette being offered (excluding white):

What About Special Effects?

The minute our Print Applications Manager, Ed Branigan, got his hands on the GEN IV line, he immediately tested the ink on the manual as well as automatic printers. Not only did he print with the inks straight and tested the glitter and puff bases, but he also tried to come up with other techniques to showcase some special effects.

Here are just some of the results: (more to come!)

Leather Crinkle Effect Antique Effect


Tel: 1 (562) 926-1010 • Toll Free (US only): 1 (800) 425-4103 • Fax: 1 (562) 926-9486 59

CONTAMINATION OF INKCONTAMINATION OF INKCONTAMINATION OF INKCONTAMINATION OF INK

IMPORTANT INFORMATIONIMPORTANT INFORMATIONIMPORTANT INFORMATIONIMPORTANT INFORMATION

GE

N I

SE

RIE

S I

NK

S

FEATUREFEATUREFEATUREFEATURESSSS

RECOMMENDED FABRICS

INK APPLICATION


SQUEEGEE

DR ER TEMPERATURES

CLEAN-UP

PRODUCT PACKAGING


PRODUCT MSDS

60

GEN IV SERIES

SPECIALTY PRODUCTS

When vibrant colors and bright whites are not enough, International Coat-ings™ comes through with dimensional, glitter, reflective, metallic, puff, granite, and other special-effect inks to meet the need.

With the variety of inks available in our product line, there is no limit to what your imagination can produce. By using specialty inks such as our dimensional inks, holographic glitter ink, gel gloss ink, metallic shimmer ink, or even our bead adhesive to add caviar beads to your textile prints, ideas can become reality.

Check out these NEW additions to our specialty product line:

3810 BLOWOUT BASE

3810 BlowOut Base will blister and bubble up to form a unique spongy and textured surface. See following product pages for more details.

3811 GRANITE BASE

3811 Granite Base dries to form a granite- or vinyl- like substrate and can be used alone or in combination with other products to create various tex-tures and special printing effects. More on the following pages.

3802 FOIL RESIST ADDITIVE

3802 Foil Resist Additive can be added to most standard plastisol inks to make them resist adhesion to foils. More details on following pages.

METALLIC SHIMMER FASHION COLORS

Due to popular demand, International Coatings is introducing new fashion colors of pre-mixed Metallic Shimmer: 146 Ruby Red Metallic, 148 Royal Metallic, 149 Purple Metallic and 147 Green Metallic.

The new Metallic Shimmers add a bright, non-tarnishing metallic sparkle to printed garments. The inks contain fine, shimmering glitter flake in a low bleed, low fusion, easy-to-print base that performs well on automatic and manual printers.

61



62

Here are more of our specialty and special effects products:

HIGH DENSITY INKS (HD)

These inks produce dramatic 3-dimensional, heavy-deposit prints.

Because of reduced tack and increased flow characteristics, these high-viscosity plastisol inks will print through thick stencils. Their unique flash time will speed up production and dwell time in the dryer.

Extremely sharp edges can be produced for maximum effect. Available as 142LF HD Base, 143LF HD White and 144LF HD Black. HOLOGRAPHIC GLITTER

140 LF Holographic Glitter inks are formulated to produce a dramatic and unique holographic effect with high gloss and excellent durability.

The inks contain special holographic glitter flakes in an ultra-clear base. 140LF can be printed directly to fabric or printed as a cold-peel transfer.

108 LF GLOW-IN-THE-DARK

Our Glow-In-The-Dark (Phosphorescent) ink produces a bright, greenish glow in a darkened environment, after exposure to a light source.

This product is ready-to-use from the container and can be used for direct print or cold peel transfer applications.

155 LF LB SHIMMER PLASTISOL

155LF LB (low-bleed) Shimmer is a translucent iridescent glitter flake in a very clear base. It is a press-ready plastisol used for creating special sparkling effects on garments.

156 LF, 157 LF METALLIC SHIMMERS

Our 156LF Metallic Silver and 157LF Metallic Gold Plastisols are all press-ready.

They provide a bright, non-tarnishing metallic sparkle to printed garments. The inks consist of fine, shimmering glitter flakes in a low-bleed, low-fu-sion, easy-to-print base. Easy printing is a real plus for manual and auto-matic printers when it comes to wear-and-tear on people and equipment.



3801 LF PLASTISOL FOIL ADHESIVE

3801 LF is a clear plastisol adhesive used to produce brilliant metallic foil designs on textiles.

3801 LF adhesive can be printed directly onto the fabric. Foil is then applied to the dried adhesive.

The adhesive also can be printed directly on the foil in a way similar to print-ing a conventional transfer. Designs made with 3801LF adhesive can be applied to light or dark fabrics.3805 LF SUPER STRETCH CLEAR

This specially formulated plastisol provides exceptional stretch and is great for use on Lycra, Spandex, knitted rib, or combination stretch fabrics.

This versatile product can also be used as a stretch additive, foil adhesive, or as a clear carrier for PVC or glass beads. When added to regular plas-tisol inks, it adds a nice glossy finish.

3806 LF GEL GLOSS CLEAR

Formulated to produce a very glossy “wet” look when printed on top of other flashed plastisol inks, this unique plastisol product is not sticky or tacky after curing.

It also can be used as a caviar bead (PVC or glass) adhesive.3807 LF PHTHALATE FREE GEL GLOSS CLEAR

This product produces the same “wet” look when printed on top of other flashed plastisol inks, however it is Phthalate free.

Also adds a very glossy finish which is non-tacky or sticky after curing. This product can also be used as a clear carrier or adhesive for PVC or glass caviar beads or as a low-tack “glitter base” for a “dry look” or hand-dipped effect.

3809 LF SPECIAL FX CLEAR

This is a plastisol clear product which achieves a very high glossy finish when used as a base or overprint.

Special FX Clear works well as a high-density clear for “stacking” purposes and has minimal after-flash tack. Cures at low temperatures.

63



64



199 LF LOW BLEED FIRST DOWN CLEAR

This low bleed product works as a base to help prevent bleeding when a white base is not wanted. It is a medium viscosity plastisol clear ink with fast flash and low bleed characteristics.

Printed wet, 199 LFFirst Down Clear also works to “wet trap” fibers when printing a low bleed white on top.

720 LF SOFTHAND CLEAR

This product is a super clear, curable extender base plastisol specifically formulated to soften, extend and increase the flow characteristics of most plastisol inks.

1199 LF STRETCH INK ADDITIVE

1199 LF Stretch Ink Additive can be easily mixed into Multipurpose, 700 Series or 1100 Series plastisols to produce increased elongation on Lycra, Spandex and other stretch fabrics.

1199LF is a 100% solids ink that contains no solvents. The printed ink has excellent laundry resistance.

Dragon Print created using Glitter and Suede Additive

65



3810 BLOWOUT BASE™

International Coatings™ introduces a brand new special effects ink - 3810 BlowOut Base™. Upon curing the ink through the dryer, 3810 BlowOut Base™ will blister and bubble up to form a unique spongy and textured surface. Like International Coatings’ High Density and Special FX Clear products, 3810 BlowOut Base™ can be used as a stand-alone product or in combination with other inks (including other special effects inks) to pro-duce a wide range of new looks.

3810 BlowOut Base™ is versatile and can be printed in a variety of dif-ferent ways to create new textures and fashions. For example, longer or repeated exposure to heat will increase the height and texture of the ink surface. 3810 BlowOut Base™ can be tinted using International Coatings’ 7400 Series Color Concentrates or can be printed on top or underneath other plastisol inks. The combinations and effects are limited only by one’s imagination.

MODIFYING INK Due to its unique properties, 3810 LF BlowOut Base™ can be modified to produce many varied looks and textures. Modified BlowOut Base™ should only be used in production after thorough testing of the modified product. Always test for wash fastness before beginning a production run. SPOT FLASHING 3810 LF BlowOut Base™ will spot dry, with very low after-flash tack, in 3 to 8 seconds depending on the spot dryer used. Too much heat / time may cause the ink to become sticky after flashing. Adjust flash unit accordingly. When spot drying, the ink should be just dry to the touch, with no lift off, but not totally fused. Totally fusing the ink may cause inter-coat adhesion problems with the inks printed on top of the flashed ink. Final curing I fusing should occur in the dryer. CREATIVITY 3810 LF BlowOut Base™ allows the printer to create unique, assorted textures and looks using a variety of print techniques and ink modifications. From adding color concentrates to BlowOut Base™ or overprinting, under basing or mixing in metallic inks, the potential of BlowOut Base™ is only limited to the user’s creativity. Running the BlowOut Base™ through the dryer at higher than recommended temperatures or longer dwell times will also create a variety of different looks. IMPORTANT INFORMATION 1. 3810 LF BlowOut Base™ is not a bleed resistant ink and on some types of fabric, bleeding or dye migration may occur. Always test for possible dye migration before beginning a production run. Bleeding or dye migration may not occur right away. 2. Always stir 3810 LF BlowOut Base™ before using. 3. 3810 LF BlowOut Base™ is a semi-translucent base and should be mixed with other inks or color concentrates or over-printed with other inks to achieve more opacity on dark fabrics. Properly setting squeegee, flood bar and off-contact will improve print performance of the ink. 5. It is extremely important to keep 3810 LF BlowOut Base™ from getting too hot in storage. Temperatures above 90°F (32°C) may cause the ink to thicken to a point where the ink may be difficult to use.

3810

Blo

wO

ut B

ase™


FEATURES 3810 LF* BlowOut Base™ Special Effects ink. Used to create very uniquely textured, spongy surfaces. Use as a stand-alone product or in combination with other inks such as International Coatings’ Granite Base™ or 7400 UltraMix® Color Concentrates to create a variety of new textures and looks.


RECOMMENDED FABRICS 100% cotton and some polyester or cotton/polyester blends. Use as an under base or as is. Always test print for bleeding or dye migration.

INK APPLICATION BlowOut Base™ can be printed with or without any modifications depending on the desired results. Thinning of this product is not recommended.



SQUEEGEE 60-70 Durometer: Sharp or rounded Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp or Rounded Edge







Very creamy, short bodied ink, with low tack for ease of printing. For use on 100% cotton and some polyester or cotton/polyester blends.



66

3810 BLOWOUT BASE™



67

3811 GRANITE BASE™

3811 Granite Base™ dries to form a granite- or vinyl- like substrate and can be used alone or in combination with other products to create various textures and special printing effects.

3811 Granite Base™ can be printed on light or dark fabrics, as a flat print or a high density print, producing varied textured effects and fabric-textured surfaces. 3811 Granite Base™ can also act as a foil adhesive. Adding foil, tints or other plastisol inks can further increase the versatility of 3811 Granite Base™, such as creating vintage and distressed looks.

Multiple and varied special effects can also be achieved by printing 3811 Granite Base™ on textured surfaces and/or using larger ink deposits. A longer drying time or increased temperature will also change the texturing of the 3811 Granite Base™, thus achieving additional textures. The ap-plications are limitless.

MODIFYING INK Due to its unique properties, 3811 LF Granite Base™ can be modified to produce many varied looks and textures. Modified Granite Base™ should only be used in production after thorough testing of the modified product. Always test for wash fastness before beginning a production run. SPOT FLASHING 3811 LF Granite Base™ will spot dry, with very low after-flash tack, in 3 to 8 seconds depending on the spot dryer used. Too much heat / time may cause the ink to become sticky after flashing. Adjust flash unit accordingly. When spot drying, the ink should be just dry to the touch, with no lift off, but not totally fused. Totally fusing the ink may cause inter-coat adhesion problems with the inks printed on top of the flashed ink. Final curing I fusing should occur in the dryer. CREATIVITY 3811 LF Granite Base™ allows the printer to create unique, assorted textures and looks using a variety of print tech-niques and ink modifications. From adding color concentrates to the Granite Base™, overprinting, under basing or mixing in metallic inks, the potential of Granite Base™ is only limited by the user’s creativity. 3811 LF Granite Base can also be used as a foil adhesive to achieve an even greater variety of looks. Running the Granite Base™ through the dryer at higher than recommended temperatures or longer dwell times will also create a variety of different looks. IMPORTANT INFORMATION 1. 3811 LF Granite Base™ is not a bleed resistant ink and on some types of fabric, bleeding or dye migration may occur. Always test for possible dye migration before beginning a production run. Bleeding or dye migration may not occur right away. 2. Always stir 3811 LF Granite Base™ before using. 3. 3811 LF Granite Base™ must be mixed with other inks or color concentrates, or over-printed with other inks to obtain maximum opacity on dark fabrics. 4. It is extremely important to keep 3811LF Granite Base™ from getting too hot in storage. Temperatures above 90°F (32°C) will cause the ink to thicken to a point where the ink may be difficult to use.

3811

Gra

nite

Bas

e™


FEATURES 3811 LF* Granite Base™ Special Effects ink. Use to create unique textured surfaces. Use as a stand-alone product or in combination with other inks such as International Coatings’ BlowOut Base™ or 7400 UltraMix® Color Concentrates to create a variety of new textures and looks.


RECOMMENDED FABRICS 100% cotton and some polyester or cotton/polyester blends. Use as an under base or as is. Always test print for bleeding or dye migration.

INK APPLICATION Granite Base™ can be printed with or without any modifications de-pending on the desired results. Thinning of this product is not recom-mended.








Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed. Use within one year of receipt.


Very creamy, short bodied ink, with low tack for ease of printing. For use on 100% cotton and some polyester or cotton/polyester blends.



3811 GRANITE BASE™

68



69


International Coatings™’ new 3802 Foil Resist Additive can be added to most standard plastisol inks to make them resist adhesion to foils. 3802 Foil Resist is ideal when working with foil applications using a heat transfer press. 3802 Foil Resist simplifies production for designs with foil and with areas free from any foil decoration,

3802 Foil Resist Additive allows greater control of the design and applica-tion process, is easy to mix into inks and is easy to use. Use 3802 Foil Re-sist along with International Coatings’ 3801 Foil Adhesive to create special effects and add textures to the design.

3802 Foil Resist Additive is now available through International Coatings’ exclusive world-wide network of distributor companies. Contact us at 1 (562) 926-1010 or visit our website, www.iccink.com, for more informa-tion.

Note: In the photo below, Foil was transferred onto Caviar Beads. 3802 Foil Resist was added to the other ink components to keep the foil from adhering.

MODIFYING INK Modifying 3802 LF Foil Resist Additive is not recommended. SPOT FLASHING 3802 LF Foil Resist Additive may slow down the flash times of some plastisol inks. 3802 LF Foil Resist Additive should spot dry, with very low after-flash tack, in 3 to 8 seconds depending on the spot dryer used and the ink the additive is mixed into. Too much heat / time may cause the mixed ink to become sticky after flashing. Adjust flash unit accordingly. When spot drying, the ink should be just dry to the touch, with no lift off, but not totally fused. Totally fusing the ink mixed with 3802 LF may cause some adhesion problems with the foil that is being applied. Final curing I fusing should occur in the dryer. IMPORTANT INFORMATION 1. For best foil application results, it is important to apply foil within 24 hours of printing. 2. 3802 LF Foil Resist Additive and its use should be thoroughly tested for wash fastness before beginning a pro duction run. Due to the difference in inks that the additive may be added to and the difference in the type of foils used, prior testing before beginning production is strongly recommended to help insure proper perform ance of the combined products. 3. The 3802 LF Foil Resist Additive is not a bleed resistant product and should be tested when used on fabrics where bleeding or dye migration may occur. Bleeding or dye migration may not occur right away. 4. Always stir 3802 LF Foil Resist Additive and mix thoroughly into other inks before using (maximum 10% to 15%) by weight. 5. Do not use 3802 LF Foil Resist Additive as is. The additive must be mixed into another ink before use. 6. On some fabrics, wicking to the side of the image may occur if too much 3802 LF is used in the mixed ink. Test to make sure this is not happening before and after the foil application process. 7. The addition of 3802 L F Foil Resist Additive may cause the mixed ink to crock and will make the mixed ink more prone to fibrillation on problem fabrics. Wash tests should be performed before beginning production runs.

3802

Foi

l Res

ist

Add

itiv

e


FEATURES 3802 LF Foil Resist Additive resists foil adhesion when applying foil in a heat press. Use to create multi-color designs with foil sticking only to the desired areas of the design or print. Easily mixes into and works with most standard plastisol inks.


RECOMMENDED FABRICS 100% cotton and some cotton/polyester blends. Always test print and check for wash fastness and possible bleeding or dye migration.

INK APPLICATION

3802 LF Foil Resist Additive can be mixed into most standard plasti-sols (10% to 15% 3802 LF additive by weight maximum) to make the mixed ink resist foil during application of the foil in a heat press. For best foil application results, it is important to heat apply foil within 24 hours of printing.


86 to 160 t/in or 34 to 63 t/cm Monofilament Any direct or indirect lacquer resistant emulsion.








For use on 100% cotton and some cotton/polyester blends. Use in combination with International Coatings’ 3801 Foil Adhesive.




70

71

HD DIMENSIONAL INK

HOLOGRAPHIC GLITTER PLASTISOLCONTINUED

73

108 GLOW-IN-THE-DARK

74

155 SHIMMER PLASTISOL

75



76

146, 147, 148 & 149 METALLIC SHIMMERFASHION COLORS

International Coatings™’ introduces our new Metallic Shimmer pre-mixed Fashion Colors. Due to popular demand, we have created these new col-ors just in time for the Spring and Summer rush.

The colors are: 146 Ruby Red Metallic, 148 Royal Metallic, 149 Purple Metallic and 147 Green Metallic.

Our new Metallic Shimmers add a bright, non-tarnishing metallic sparkle to print-ed garments. The inks contain fine, shimmering glitter flakes in a low bleed, low fusion, easy-to-print base that performs well on automatic and manual printers. The new fashion colors enhance our existing line of Metallic Shimmers also in-cludes 156 Metallic Silver, 157 Metallic Gold and 158 Metallic Copper.

156, 157 & 158 METALLIC SHIMMERS AND146, 147, 148 & 149 FASHION COLORS

77

3801 PLASTISOL ADHESIVE

78

3805 SUPER STRETCH CLEAR

79

3806 GEL GLOSS CLEAR

80

3807 PF GEL GLOSS

81

3809 SPECIAL FX CLEAR

82

720 SOFTHAND CLEAR BASE

83

3707 Dye Discharge Base & 3709 Discharge Activator-ZFS FEATURES: International Coatings’ 3707 Discharge Base is a clear water base binder specifically formulated to produce excellent discharge results on most reactive dyed fabrics when used with the 3709 Discharge Activator-ZFS. Use as stand alone ink or as an under base to achieve a softer hand. Anti-corrosion pigments can also be added to achieve brilliant dischargecolors. 3707 has a low viscosity allowing for ease of printability on manual and automatic equipment and cleans up with water.

RECOMMMENDED FABRICS: 3707 Discharge Base and 3709 Discharge Activator-ZFS are recommended for use on reactive dyed 100% cotton fabrics and best discharge results are obtained when using fabrics that have been specified for discharge printing applications.

APPLICATION: Prior to use, add 3% - 6% by weight of the 3709 Discharge Activator-ZFS to the 3707 Discharge Base. Pot life of mixed ink is approximately 6 to 8 hours. Corrosion resistant pigments, up to 10% by weight, can be added to achieve colors.Always stir in pigments first to the 3707 Base before adding the 3709 Discharge Activator.

SCREEN MESH & EMULSION: 86 to 110 (t/in) 34 to 43 (t/cm) monofilament. Any direct or indirect water resistant emulsion.

PRINTING: 3707 Discharge Base can be used as a stand alone product or as an under base.

SQUEEGEE: 60-70 Durometer. Sharp edge.

CURING: Cure at a minimum of 325°F to 350°F (163°C to 177°C) for 2-3 minutes to ensure optimum discharge of the dye and proper curing of the ink. High volume hot air dryers are recommended. Best discharge results are achieved when prints are runthrough the dryer immediately after printing. If the print is not completely discharged the first time through the dryer, do not stack the fabric and immediately run through the dryer again.

CLEAN UP: Water. Mixed discharge ink left over at the end of a printing job should be placed in a well sealed container and disposed of in accordance with local regulations.

STORAGE: Store at 65° F to 90° F (18°C to 32°C) Avoid storage in direct sunlight and protect against extremes of temperature. Keep containers well sealed at all times.

PRINTING TIPS & PRECAUTIONS

To achieve optimum discharging, ensure that the discharge agent is completely dissolved into the binder before printing. Add corrosion resistant pigments to the 3707 discharge base before adding the 3709 Discharge Activator-ZFS. Mix only

the amount required for production. Activated ink should be used within 6 to 8 hours of adding the discharge agent. Containers should be kept tightly sealed when not in use. Test all fabrics before use, especially fabrics from different dye lots and/or colors. Not all fabrics are dischargeable. Results

may vary on fabrics from different dye lots. Consult your garment supplier or manufacturer when a variance occurs. Discharge inks must be cured at the recommended temperature. Failure to do so may result in weak discharging of fabric

dyes and poor wash fastness. Use 3% - 6% of the 3709 Discharge Activator-ZFS. The amount required will depend on the fabric used. Do not add more

than 6%. Avoid leaving inks in the screens for prolonged periods and leave screens flooded when not printing. Even water resistant

emulsions may not stand up to prolonged exposure to the discharge inks. Avoid folding and packing discharged fabrics immediately after printing.

Due to variations in fabrics, printing and drying conditions, there may be residual chemicals such as formaldehyde remaining on the printed fabrics. It is recommended that the discharged garments be washed before packaging or labeled ‘Wash before wearing’.


13929 E. 166th St., Cerritos, CA 90703 • Toll Free in U.S. (800) 423-4103, (562) 926-1010 • Fax (562) 926-9486 • E- mail [email protected] • Website www.iccink.com

86

TRANSFER PRODUCTS

Add dimension and special effects with high-quality transfer products from International Coatings™. They look great, and they have the du-rability to last and last.

International Coatings™ has formulated several products that can take your products to the next level. From dimensional to reflective trans-fers, as well as printing on nylon products, check our product offering first.

MULTIPURPOSE SERIES

Our Multipurpose series can be used for direct printing as well as a cold-peel or hot-peel transfer ink. (See page 18 for more info).

With more than 40 standard colors to choose from, this versatile ink can be simply turned into a transfer medium by adding our 500 Quick Trans Additive.

3801 FOIL TRANSFER ADHESIVE

This versatile clear transfer foil adhesive can be printed directly onto the fabric or printed directly on the foil as a conventional transfer would be printed (in mirror image).

87



88

FFFFOIL APPLICATIONOIL APPLICATIONOIL APPLICATIONOIL APPLICATION Foil is applied colored side up and aluminum looking (dull) side down. Rub foil with eraser immediately after appli-cation to help remove any wrinkles. Allow transfer to cool completely (20 to 30 seconds) after application before removal of foil sheet. Pull foil sheet off slowly. It can be helpful to tint the 3801LF Foil Adhesive, to the color of the foil being applied, with a small amount of con-ventional plastisol. This process will help to keep small pinholes in the applied foil film from being noticeable. As example: Use a few grams of yellow or gold plastisol in the 3801LF Adhesive when using gold foil. Use a few grams of black or gray plastisol in the 3801LF Adhesive when using silver foil. APPLICATION TEMPERATURE 300°F to 325°F (149°C to 163°C). Try lower temperature first for best results. APPLICATION TIME 10-15 Seconds APPLICATION PRESSURE T-Shirts = Medium (40lbs.) Sweatshirts = Medium to Heavy (40lbs. to 60lbs) The brightest foil effect will result when the foil is first removed. To achieve a textured matte finish foil, re-seal the garment or hat in the transfer press for 3-4 seconds after the foil carrier film has been removed.

IMIMIMIMPORTANT INFORMATIONPORTANT INFORMATIONPORTANT INFORMATIONPORTANT INFORMATION For best durability of the foil after it is applied, it is recommended that the garment be hand washed or machine washed (delicate cycle) inside out and line or air dried. Do not use bleach. Do not iron printed area.

38

01

PL

AS

TIS

OL

FO

IL A

DH

ES

IVE

Recommendations and statements made are based on International Coatings’ research and experience. Since International Coatings does not have any control over the conditions of use or storage of the product sold, International Coatings cannot guarantee the results obtained through use of its products. All products are sold and samples given without any representation of warranty, expressed or implied, of fitness for any particular purpose or otherwise, and upon condition that the buyer shall determine the suitability of the product for its own purpose. This applies also where rights of third parties are involved. It does not release the user from the obligation to test the suitability of the product for the intended purpose and application. REV090104

FFFFEATUREEATUREEATUREEATURESSSS 3801LF* is a clear plastisol adhesive used to produce brilliant metallic foil designs on textiles. The adhesive can be printed directly onto the fabric and the foil applied to the dried adhesive. The adhesive can also be printed directly on the foil as a conventional transfer would be printed (mirror image). Designs made with 3801LF adhesive may be applied to light or dark fabrics.


RECOMMENDED FABRICS 100% Cotton and some cotton/polyester blends.

ADHESIVE APPLICATION The 3801LF Foil Adhesive should be printed right out of the container without any modifications. Stir adhesive prior to use.


74 to 110 t/in or 30-43 t/cm Monofilament Any direct or indirect lacquer proof emulsion. Use 70 to 80 micron capillary film for best results. Recommend: 86 to 110 t/in or 34-43 t/cm mesh for T-Shirts Recommend: 74 to 86 t/in or 30-34 t/cm mesh for sweatshirts

SQUEEGEE 60-75 Durometer: Sharp or beveled edge

CURE TEMPERATURE

For direct printed fabrics: 325°F (163°C) entire ink film. For transfer printing (adhesive on foil): 240°F to 275°F (116°C to 135°C) Test dryer temperatures and wash test printed product before and during a production run.

CLEAN-UP Mineral Spirits or any environmentally friendly plastisol screen wash.

PRODUCT PACKAGING Quart, 1 Gallon or 5 Gallon Containers.



PRODUCT MSDS Refer to material safety data sheet MSDS8.



3801 PLASTISOL ADHESIVE

INSTA GRAPHIC SYSTEMS® HEAT SEAL MACHINES

International Coatings™ is proud to announce that INSTA Graphic Sys-tems®’ Heat Seal Machines are now available through selected Inter-national Coatings’ distributors. INSTA® is the world’s leading manufac-turer of state-of-the-art heat seal machines for transfer applications on fabrics and non-porous hard surfaces. INSTA® machines do the job right every time!

The ultimate in machinery for application of heat transfers and for the color copy industry, INSTA®’s heat seal equipment is backed by proven reliability, quality parts and construction, and a lifetime guarantee on its cast-in tubular heating element. It also carries a one-year guarantee on replacement parts and a 90-day guarantee on labor.

89



QUALITY ENGINEERING

All INSTA® machines have a cast-in tubular heating element, the most reliable even heating source available. The temperature control sen-sor is located as close to the heating surface as possible to ensure accurate temperature sensing. Platens are cast and heat-treated. The printing surface is tested for ultimate flatness. INSTA® coats the upper heating platen with Teflon for easy cleaning. The lower platen is covered with the finest silicone sponge rubber for superior applications.

All these features come housed in a heat-treated aluminum casting for strength and durability. The painted finish is baked enamel, which keeps the machine looking as good as the products it seals.

Quality parts and construction from the inside out – INSTA®’s machines are the ones you can depend on!

SAFETY FIRST

INSTA® manufactures ten manual and automatic (pneumatic) models available in 120-volt and 240-volt systems. All INSTA® machines proudly carry approvals for quality and safety from agencies such as UL in the Unites States, CuL in Canada and CE in Europe. These certifications assure customers that they are pur-chasing machines that meet the highest standards.

INSTA® pioneered the swing-away heat platen, which prevents direct exposure to the heating element. During application, a safety latch on manually operated machines keeps the handle in place. INSTA®’s au-tomatic models incorporate a two-hand switch operation, anti-tiedown devices, breakaway platens and disengage switches for additional safety. Visit our website for more features of our INSTA Graphic Systems® at www.iccink.com

90



Model 828Digital AutomaticSwing-Away Press

230/240 volt –(20” x 25” platen)

Model 909Single Station Machine

115/120 volt – 230/240 volt – (6” x 6” fl at head platen)

Model 228Digital Swing-Away Press

115/120 volt – 230/240 volt – (15” x 20” platen)

Model 204Multi-Purpose Manual

Digital Swing-Away Press

115/120 volt – 230/240 volt –

(15” x 20” platen)

Model 914Digital Automatic

Cap Press

115/120 volt –230/240 volt –

(3.25” x 6.75” curved platen)

Model 138Digital Manual

Clam Press

115/120 volt – 230/240 volt –

(15” x 20” platen)

Model 418 Digital Cap Press

115/120 volt – 230/240 volt – (3.25” x 6.75” curved platen)

Model 158 Digital Auto Release Clam Press

115/120 volt – 230/240 volt – (15” x 20” platen)

Model 929 (Shown)Pic n Place Machine


Model 718Digital Automatic Swing-Away Press

115/120 volt – 230/240 volt –

(15” x 15 platen)

Heat Seal Machines

Model 728Digital Automatic Swing-Away Press

115/120 volt –230/240 volt –

(15” x 20” platen)

Model 907Dual Station Shuttle Machine


®®®

91

PART NO. 10200AP TRANS PAPER (FRENCH) 12” x 12” (500 SHEETS) 10500AP TRANS PAPER (HOT PL) 12” x 12” (500 SHEETS) 10700AP TRANS PAPER (TUF TR) 12” x 12” (500 SHEETS) 10850P FLOCK SHEETS (12” x 19”) (100 SHEETS PER COLOR)

PART NO. 30600 PELLON (WHITE) 11.5” x 13” (100 SHEETS) 30605 PELLON (WHITE) 15” x 15” (100 SHEETS) 30625 HEAT TAPE (ROLL) 7 yards, 3/8” width 30650 COVER SHEET SILICONE (100 SHEETS)

PRINTING ACCESSORIES

*Prices subject to change without notice.

PART NO. MAPA005 PLATEN, DOUBLE SLEEVE (5.5” x 4.5”) MAPG010 GREASE GUN KIT, HIGH TEMP MAPM700 MUFFLER MAPT900 TEFLON SHEET (15” x 15”) MAPT905 TEFLON SHEET (15” x 20”) MAPT906 TEFLON SHEET (20” X 25”) MAPT907 TEFLON PLATEN COVER (15” x 15”) MAPT908 TEFLON PLATEN COVER (15” x 20”) MAPT909 TEFLON PLATEN COVER (20” x 25”) MAPT911 TEFLON GLASS CLOTH (36” X 36”) MAS90124 FOOT PEDAL ACCESSORY MASP006 PLATEN 6” x 6” (700/800) MASP000 PLATEN 6” x 9” (700/800) MASP001 PLATEN 6” x 15” (700/800) MASP002 PLATEN 10” x 15” (700/800) MASP008 PLATEN, LOWER ASSEMBLY (718)

PART NO. MASP009 PLATEN, LOWER ASSEMBLY (728) MASP469 PLATEN 3.25” x 6.75” (414/900) MASP825 PLATEN, LOWER ASSEMBLY (828) MASR023 TRANSFER ASSEMBLY RETAINER (414/900) MPPC006 GLUE SILICONE RUBBER MPPF705 FUSE F1 (T250 Ma 250U) (Package of 5) MPPL022 LUBRICANT, CYLINDER MPPL023 GREASE, MULTIPURPOSE MPPP022 PAD, SILICONE (4.5” x 6.75”) BLACK MPPP024 PAD, SILICONE (3.25” x 6.75”) BLACK MPPP030 PAD SILICONE (15” x 15”) BLACK MPPP031 PAD SILICONE (15” x 20”) BLACK MPPP825 PAD, SILICONE (20” x 25”) BLACK MPSA700 AIR LINE KIT 700 SERIES MPSP466 PLATEN, LOWER ASSEMBLY (4.5” x 6.75”) MPST413 TEFLON GLASS BAND

A. MASP002 B. MAPA005 C. MASP001 E. MASP000 D. MPSP466

A

C

B

D

E

Accessory PlatensGrease Gun

MAPG010

For machine part orders, please visit our web site at www.instagraph.com

MACHINE PARTS & ACCESSORIES

Model Model Model Model Model 718 728 828 414 914MASP006 6” x 6” 6” x 6” 6” x 6” N/A N/AMASP000 6” x 9” 6” x 9” 6” x 9” N/A N/AMASP001 6” x 15” 6” x 15” 6” x 15” N/A N/AMASP002 10” x 15” 10” x 15” 10” x 15” N/A N/AMAPA005 Double Sleeve Double Sleeve Double Sleeve 5” x 4.5” 5” x 4.5” 5” x 4.5” MASP008 15” x 15” 15” x 15” 15” x 15” N/A N/AMASP009 N/A 15” x 20” 15” x 20” N/A N/AMASP469 N/A N/A N/A 3.25” x 6.75” 3.25” x 6.75”MPSP466 N/A N/A N/A 4.5” x 6.75” 4.5” x 6.75”

Interchangeable Lower Platen Sizes

N/A N/A

Price Recommended Specifi cation for Air Compressor (Air operated models only)

1/2 - 3/4 horsepower10 - 12 gallon tank(38 - 45 liter tank)80 - 100 psi (5.6 - 7.0 kg/cm2)

®®®

92

FOREVER™ DIGITAL TRANSFER PAPERS

International Coatings™ is proud to announce the addition of FOREVER Digital Transfer Papers to its U.S. product line.

FOREVER has been developing transfer papers for color copiers and la-ser printers since 1989 and is one of the few real manufacturers for trans-fer paper in the industry. FOREVER offers complete solutions for printing on a wide range of different materials through the use of digital transfer technology.

FOREVER offers the right transfer paper for both, silicone fixing and non-silicone fixing color copiers as well as laser and ink-jet printers to print on white/dark textiles and hard surfaces. The product excels in transfer dura-bility and its opaque transfer paper for dark textile applications.

FOREVER’s strength is in its Research & Development and its ability to develop the right products to meet current market trends.

FOREVER products are distributed in over 70 countries worldwide. One of the main reasons for FOREVER’s international success is “Product Con-sistency,” which is also responsible for their excellent reputation.

Take your business to the next level by providing your customers with unique product offerings or personalized products tailored to their needs.

FOREVER makes transfer papers for the following applications:

FOREVER Solvent Dark and Solvent Dark Metallic papers are for sol-vent-based printers and hybrid printer/plotters and will work for transfers onto white or dark colored cotton, denim, leather, polyester, and canvas. The result is a photo-realistic image without stretch marks.

FOREVER Subli-Dark is for sublimation quality transfers onto light or dark textile surfaces, including 100% cotton, denim and leather using printers with sublimation inks.

93



FOREVER Classic and Classic+ Universal transfer paper line for transfers unto white or light-colored textile surfaces. Produces an extremely durable transfer, yet retains a soft hand. Classic+ Universal is the highest quality transfer product available in the market. It will create brilliant transfers for T-shirts, caps, mouse pads, and many other textile items.

FOREVER Laser Dark is a white-opaque transfer papers designed specifi-cally for colored or dark textiles, leather, denim and polyester applications. FOREVER Laser-Dark is also suitable for the new generation of color copi-ers.

FOREVER Ink Jet Dark has the same properties as FOREVER Laser Dark, but specifically formulated for ink-jet usage. Colors come out beautifully on dark backgrounds using this transfer paper and your standard ink-jet print-er!

FOREVER Multi-Trans is specifically designed for printing unto hard sur-faces. It adheres well to surfaces such as mugs, plates, vinyl, magnetic vinyl, acrylic glass, tiles, mirrors, CDs, and much more. Multi-Trans is also suitable for the new generation of color copiers and color laser printers with a higher fusing temperature.

FOREVER Five Star Universal is particularly well suited for light colored and loose stitched textiles such as sweatshirts and polo shirts. This transfer paper is also suitable for the new generation of color copiers and color laser printers with a higher fusing temperature.

The following pages give more information and sample applications for this wonderful product. Please also find a list of our U.S. Distributors included on the following page.

94



AxAxioiom m AmAmerericicaa

AA hhdd ll NNCC 2727262633ArArchchdadalele N NC C 272726263380800-0-69697-7-6565232333336-6-88882-2-89898383 f faxax

wwwww.w.axaxioiomamamemeriricaca.c.comom

95

FOREVER CANVAS METALLIC

FOREVER MULTI-TRANS

NEW!

NEW!

®

Introducing FOREVER Digital Transfer Paper

DIGITALTRANSFER FOR POLYESTER GARMENTS

FOREVER INK-JET DARKRRK

FOREVER SOLVENT DARK



96

DIGITAL TRANSFER PAPERS FOR LASER PRINTERS AND COLOR COPIERS

®

FOREVER CLASSIC + UNIVERSALFOREVER FIVE STAR UNIVERSAL

Transfer paper for printing onto white or light-colored 100% cotton or polyester/cotton blend fabrics

Transfer to mouse pads, aprons, canvas bags, T-shirts, bedding, etc.

8.5 x 11 inches, 11 x 17 inches

FOREVER Classic + Universal, and Five Star Universal transfer papers offer extreme detailing, high quality images onto white or light-colored substrates. All three products have excellent wash-fastness and durability.



97

FOREVER LASER-DARK NEW GENERATION

The new and improved transfer paper for dark fabrics was developed especially for printers of the new generation - the ones fixing without the use of silicone oil. However, Laser Dark can also be used with older generation printers as well.

The amazing washability is one of the main distinguishing features of this product. Besides the long lasting print, the brilliancy of the image as well as the detailing is far superior to other products we have tested.

8.5 x 11 inches, 11 x 17 inches

PRINTABLE MATERIALS:Dark and colored textiles of 100% cotton, leather, denim, some polyester fabrics (testing is highly recommended)

NEW!



98

DIGITAL TRANSFER PAPERS FOR LARGE FORMAT PRINTERS

FOREVER SOLVENT-DARK FOREVER SOLVENT-DARK METALLIC Suitable for cotton,

light colored polyester or mixed fabrics Photo-realistic image quality

available in glossy or matte finish

Same printing results on all fabric colors

Extremely elastic product, will not produce stretch marks

Superior wash fastness and color brilliance for professional applications

Allows for multi-color digital printing

FOREVER Solvent Dark and Solvent Dark Metallic will exceed your expectations. Specifically designed for for solvent ink prin-ters, the paper transfers brilliant colors onto dark backgrounds with amazing detail.

The new generation of environmentally safe Solvent Inks (Eco-Solvent, Mild-Solvent, Light-Solvent) for indoor usage and the Hybrid Plotters (Printer/Cutter) now make it extremely easy for Screen Printers to print transfers of the highest digital quality for dark garments and other substrates.

The examples featured on this page are just a few of the applica-tions made possible with FOREVER Solvent Dark and Solvent Dark Metallic.

From boots to umbrellas, customizing garments, bags, even key-chain holders are now a cinch.

®



99

Sublimation on 100% Cotton? YES, It‘s possible!

The unique characteristics of sublimation inks, which transform from solids to gas under the influence of heat, made this revolutionary process possible.

FOREVER Subli-Dark was specifically developed to work with your sublimation prin-ters and even works on dark fabrics!

The printed garment can be washed over 100 times without any deterioration in image qua-lity. Feedback from hundreds of customers can attest to this fact.

ROLL SIZES: 25 m x 65 cm / 83 1/3 ft x 25.6 in

Suitable for 100% cotton Photo-realistic image quality

available in glossy or matte finish

Same printing results on all fabric colors

Multicolor FLEX application in a single printing step

FOREVER SUBLI-DARK

Extremely elastic product, will not show stretch marks

Superior wash fastness and color brilliance for professional applications

Allows for multi-color digital printing

NEW!

www.iccink.com13929 E. 166th St., Cerritos, CA 90703; PH (562) 926-1010 or (800) 423-4103; FX (562) 926-9486

DIGITAL TRANSFER PAPERS FOR INK JET PRINTERS

FOREVER INK JET-DARK for large format printers and desktop printers

FOREVER Ink Jet-Dark for dark fabricsFOREVER Ink-Jet Dark transfers colors with brilliant intensity onto dark backgrounds and has the same superior performance characteristics as all the FOREVER transfer paper products: Application, versatility, color brightness, opacity, detail, durability and washability.

FOREVER Ink-Jet Dark can be used on a variety of substrates, including 100% cotton, lea-ther, and ligher colored cotton/poly blends.

FOREVER Ink-Jet Dark is suitable for dye as well as for pigment based inks. The fol-lowing characteristics make this product so unbelievably valuable: The image prin-ted with FOREVER Ink Jet-Dark dries fast. The FOREVER Ink Jet-Dark trans-fer paper has a high ink acceptance capacity. Another characteristic feature of the FOREVER Ink Jet-Dark transfer paper is the high color intensity and brilliance as well as the photo-realistic rendering with high detail sharpness.

®

.

NEW!

101www.iccink.com13929 East 166th Street, Cerritos, CA 90702-7666


Here are more FOREVER Ink-Jet Dark characteristics:

Transfer paper for water based ink for printing onto colored fabrics, leather, etc.

8.5 in x 11 in, 11 x 17 in

25 m x 65 cm, 25 m x 127 cm 83 1/3 ft x 25.6 in, 83 1/3 ft x 50 in

PRINTABLE MATERIALS: dark colored fabrics, leather

TRANSFER:Transfer with heat press(Do not use an iron to transfer the image.)

All other DARK features of the FOREVER transfer papers, such as the high opacity on dark colored cotton fabrics, the wash fastness etc. are the same.

In head-to-head comparisons against a leading competitor‘s product, FOREVER Ink-Jet Dark proved to be more brilliant in color, more opaque, and held up better in wash tests.

See the results for yourself:

Transfer using FOREVER Ink-Jet Dark Transfer using a leading competitor‘s brand

The FOREVER Ink-Jet Dark produced a more brilliant transfer, with more vibrant colors, detail, and opacity.

Both images were printed with the same printer and were transferred on black backgrounds using the exact same heat settings.



DIGITAL TRANSFER PAPERS FOR COLOR COPIERS AND PRINTERSWITH A HIGHER FUSING TEMPERATURE

®

FOREVER MULTI-TRANS

FOREVER Multi-Trans for printing onto hard surfaces

This amazing transfer paper was especially developed to adhere to hard substrates such as mugs, plates, beer steins, magnetic vinyls, place mats, wood, adhesive papers, tiles, mirrors, acrylic, plexiglass, metal, nylon, lighters, CDs, and much more.

8.5 in x 11 in, 11 x 17 in



ACCESSORIES TO DIGITAL TRANSFER PAPERS

ANTI-STICK PAPER

Anti-Stick Paper

Coated paper for a glossy finish on all transfer projects

A3 size

VARIOTRANS

Anti-Stick Paper

Coated paper for a matte finish on all transfer projects

A3 size

Application Tape

Roll

APPLICATION TAPE



FOREVER GmbHDIGITAL TRANSFER APPLICATIONS TECHNOLOGY

Heppenheimer Str. 31-3368309 Mannheim, Germany

Phone: +49 (0)621/720 68 - 0Fax: +49 (0)621/720 68 - 40

E-Mail: [email protected]

www.ICCINK.com/forever/index.htm

INTERNATIONAL COATINGS

13929 E. 166th St.,Cerritos, CA 90702

Phone: 1 (562) 926-1010or toll-free from inside the U.S. (800) 423-4103

Fax: 1 (562) 926-9486E-Mail: [email protected]

For almost two decades now, FOREVER has been at the forefront of innovative advancements in digital trans-fer paper products. FOREVER has transfer papers for a variety of applications and substrates.

International Coatings carries a range of FOREVER transfer papers, including transfer papers suitable for laser printers and copiers as well as for sublimation ink printers, solvent ink printers and ink-jet printers.

Visit us online to see our full line of FOREVER products as well as How-To videos and tips.

®



www.iccink.com 106

OPTILUX™ ULTRA REFLECTIVE INK

International Coatings™ now offers a full line of Optilux™ Ultra Reflective inks, transfers, and adhesives. Together with Viz Reflectives, International Coatings™ has developed Optilux™ 505, the most powerful and brightest reflective ink system on the market!

Optilux™ 505 can be printed through fine meshes so printers realize sub-stantially improved yields, fine detail and definition.

The Optilux™ 950 transfer system is not only exceptionally bright but of-fers a remarkably soft hand and outstanding detail and definition. Both Optilux™ 505 Plastisol and 950 Transfers can be printed on a wide variety of substrates.

Along with Optilux™Ultra Reflective ink and transfer systems, International Coatings™ now offers the full line of VizLite® reflective tapes and promo-tional sheeting.

Coming next year are VizLite® technical and specification-grade reflective sheeting.

107



PRINTING TIPS

The more you know about your substrate, color values and transfer prod-ucts, the better your printed product will be. This is why we believe it’s important to provide as much information as possible.

International Coatings™ has been in the printing business for over 50 years, and we have a panel of experts who can help you with any screen printing questions you may have.

It is our goal to be the industry leader in our field and to provide superior quality products and service.

Following are just some of the tips we have included in this CD. These tips cover Direct Printing on Nylon Jackets, Transfer Product tips, tips for preventing Fabric Discolorations and NEW: Special Effects Printing Tech-niques.

This new section was added based on customer demand. Many of you have seen our new sample prints featuring new techniques using our spe-cial effects inks and have asked us to give you directions on how to print these. Our new Print Applications Manager, Ed Branigan, is going to keep adding new techniques to be posted on our website Spring 2008. Please keep checking back to our website at www.iccink.com to see any new items.

Most recently, we have included Ed’s published article: The Screen Print-er’s Secret Weapon, featuring his Patina Effect how-to. We have included a copy below. Included are also some of our most popular FAQs. For more FAQ and specific printing tips, please visit our website at www.iccink.com to go to our “How-To” section.

We also feature an “Ask the Expert” section on our website, whereby you can e-mail us with more specific questions if you cannot find the informa-tion listed on our How-To portion. One of our experts will then get back to you as soon as possible.

112www.iccink.com

13929 East 166th Street, Cerritos, CA 90702-7666Tel: 1 (562) 926-1010 • Toll Free (US only): 1 (800) 425-4103 • Fax: 1 (562) 926-9486

This simple technique using our High Density Dimensional ink was dem-onstrated by printing guru Charlie Taublieb at FESPA 2007 in our booth.

He simply used a wallpaper brush instead of a squeegee to get this stri-ated effect. Very simple and very effective. Try tone-on-tone or contrast-ing colors.

Here is another simple technique that Charlie showcased at FESPA 2007, simply using our 3808 Bead Adhesive and some caviar beads.

Get a great look by using this simple technique!

113

Ed Branigan came up with this special effects look. For this particular design, only one screen was used.

• Apply IC’s 3809 FX Clear using 110 mesh screen and 200 micron capillary film.

• Add caviar beads by hand while the adhesive is wet.

• Cure at 330° F for 1 minute.

• Apply silver foil on top of the caviar beads and quickly (1 second) ap-ply the foil with a heat transfer machine. Hot peel the foil and voila!

Here are the settings used on the heat transfer machine: 350 degrees F, 10 psi for 1 second

For this particular design, you will need 3 screens as follows:

1st screen• Use a mixture of 90% 3810 BlowOut™ Base and 10% Black Color Con-centrate (you can use other colors, of course) on a 25 mesh screen

• Flash the ink (10 seconds)

2nd screen • Print your design again using the mixture of 90% 3810 BlowOut™ Base and10%Black CC, using the 25mesh screen

• Flash (10 seconds)

3rd screen • On the third screen, use a mixture of 90% 3811 Granite Base™ and 10%Black CC on a 40 mesh screen

• Cure @ 380 degrees for 2 minutes and voila, you’ve got an amazing textured design.



Special Effects Print Techniques

DIRECT PRINTING NYLONJACKETS

118

MATERIAL SAFETY DATA SHEETS (MSDS) FOR INTERNATIONAL COATINGS™

SCREEN PRINTING PRODUCTS

The following pages give you the Material Safety Data Sheets (MSDS) for International Coatings’ regular plastisol products and the GEN IV Se-ries only. To look up the MSDS on a Plastisol ink, please refer to the product number you are looking for on the next sheet.

Should your particular product MSDS not be listed here, please go to our website for the latest specs here or contact our customer service for help:

From inside the U.S.: 1 (800) 423-4103

From outside the U.S.: 1 (562) 926-1010

Fax: 1 (562) 926-9486

Email: [email protected]

133



144

PLEASE NOTE:

International Coatings assumes no responsibility for 900 Catalyst that is improp-erly stored. During winter conditions, 900 Catalyst may crystallize at temperatures

below 40 degrees F. In most cases, crystallized 900 Catalyst can be restored by heating to 120 degrees F for 4 hoursheating to 120 degrees F for 4 hoursheating to 120 degrees F for 4 hours

2008 CATALOG - gogsg.com€¦ · 2008 CATALOG VOL. XI . ... FAX: (303) 733-2348 CONNECTICUT...

Documents

Transcript of 2008 CATALOG - gogsg.com€¦ · 2008 CATALOG VOL. XI . ... FAX: (303) 733-2348 CONNECTICUT...