WIRELESS CHARGE LIGHTINGSMD LED WIRELESS CHARGE WORKLIGHT & TORCH TWIN PACK

WORKLIGHT/TORCH• SMD LED Worklight: 500 Lumen• LED Torch: 150 Lumen• Adjustable Dimmer Worklight:

500 to 75 Lumens• Flexible Magnetic Base• 180° Fold Out HookCOMPACT WORKLIGHT/TORCH• SMD LED Worklight: 300 Lumen• LED Torch: 100 Lumen• Adjustable Dimmer Worklight:

300 to 30 Lumens• Flexible Magnetic Base• 180° Fold Out HookDUAL ZONE CHARGING PAD• Dual charging zones• Charges various devices• Magnetic zones holds lights

firmly in place while charging• Powerful rear magnet - Ideal for

mounting to steel tool box• Wall mountable

ALSO AVAILABLE:WORKLIGHT/TORCH WITH SINGLE ZONE CHARGING PAD

SP81499

$199

SP81496

$139

Charges compatible SP lights, latest Android & iPhones, Apple Watches, AirPods, tablets & more

Patented

NEW

SEE PAGE 7 FOR MORE LIGHTING OPTIONS

1st August - 30th September 2019

2WWW.SPTOOLS.COM

SP40119D

$1495

9 DRAWER CUSTOM SERIES ROLLER CABINET • Full drawer extension capabilities• Internal locking system• Heavy duty 28 ball bearing drawer slides• Double powder coating

resists scratching

BUILT-IN POWER BOARD WITH 4 POWER OUTLETS & 4 USB PORTS, ADJUSTABLE

SHELF & DEEP DRAWER

1070w x 480d x 1074h235PC METRIC/SAE SUMO SERIES TOOL KIT• ROE combination spanners• 1/4”, 3/8” & 1/2”dr sockets & accs.• Hex Keys & screwdrivers• Bit Set, ratchet & knife• Pliers, cutters & shifter

• Hammers• Tape measure, Punch & chisel Set• 9 drawer roll cab

SP50680D

$1995

SP52529D

$2995

356PC METRIC/SAE SUMO TOOL KIT IN TECH SERIES TOOL BOX AND ROLLER

CABINET

• 1/4”, 3/8” and 1/2”Dr Sockets (reg & deep) & Accessories

• low profile socket set • Combination Quad

Drive spanners• Screwdriver & Power

Bit sets• Hex & Torx Key Sets• Pliers & Cutters• Adjustable Wrench• Hammers, Tape

Measure & Drill Bit Set• File Set • 7 Drawer Tool Box• 7 Drawer Roll Cab.

212PC METRIC TECH SERIES TOOL KIT

• 1/4” & 3/8”Dr sockets & accs.• Metric ROE spanners - 6 to 26mm• Screwdrivers & hex keys• Pliers,cutters & shifters• Hammer & power bit set• 7 drawer Tech Series box

SP50033D

$1395

SP52525D

$1895

230PC STARTER PRO TECHNICIANS METRIC TOOL KITSTAINLESS STEEL

WORK TOP734(W) x 480(D) x 1030(H)

• 1/4” & 3/8”dr short, deep,E-torx, hex, torx sockets & accs.

• 6-24mm ROE, 10-22mm flare nut, E-Torx E6-E20, D/ring brake bleeder spanners

• Adjustable wrench, hammer, pliers, screwdrivers, hex keys, tape measure, pick set, pin punch set, bit set, ear plugs, safety glasses, filter wrench, razor scraper, feeler gauge.

• 7 Drawers Tech Series roll cab.

730(W) x 475(D) x 485(H)

DIAMON D BLACK

NEW

NEW

DIAMON D BLACK

NEW

NEW

NEW

TOOL KITS

DIAMON D BLACK

3WWW.SPTOOLS.COM

• 1/4” & 3/8”Dr sockets & accs.• Metric ROE spanners - 6 to 26mm• Screwdrivers & hex keys• Pliers,cutters & shifters• Hammer & power bit set• 7 drawer Tech Series box

• 6 - 27, 30 & 32mm Metric & 1/4 - 1-1/4” SAE combination spanners

• 1/4”, 3/8” & 1/2” dr 12pt metric & SAE sockets & accessories

• Screwdrivers• Metric, SAE, Torx key sets• Bit set, finger ratchet & ratchet

driver sets• Pliers, cutters & adjustable wrenches

• Pin punch, chisel set& pry bars • tweezers, O-ring/hook scribe set• hook/pick set• Hammers, hacksaw, knife & tape measure• Magnetic parts tray• Inspection mirror & pick-up magnetic tool• Circuit tester & digital multimeter• Side cabinet • 11 drawer Custom Series roller cabinet

347PC METRIC/

SAE CUSTOM SERIES ROLLER

CABINET TOOL KIT

1480(W) x 480(D) x 1145(H)

SP50636

$2495

Sockets: 1/4” & 3/8”Dr Short, Deep, E-Torx, Hex, Torx & Accessories. 1/2”Dr Short Chrome, Deep Impact, Wheel Nut Sockets & Accessories. Spanners: 6-24mm ROE, 10-22mm Flare Nut, E-Torx E6-E20, D/Ring Brake Bleeder.

Tools: Adjustable Wrench, Hammer, Pliers, Screwdrivers, Hex Keys, Tape Measure, Pick Set, Pin Punch Set, Bit Set, Ear Plugs, Safety Glasses, Filter Wrench, Razor Scraper, Feeler Gauge, Inspection Mirror, Magnetic Pick-up, Trim Removal, Air Duster, Multimeter, Light.

TECH SERIES 13 Drawer Roller Cab with Soft Drawer Close & Cliklok. Stainless Steel

Work Top

COLOUR OPTIONS AVAILABLE:White/Blue HandlesP/N: SP52635

White/Red HandlesP/N: SP52636

268PC TRADE TECHNICIAN TOOL KIT

EACH

$2995

236PC METRIC/SAE CUSTOM SERIES TOOL KITS• ROE combination

spanners• 1/4”, 3/8” &

1/2”dr sockets & accessories

• Hex keys & screwdrivers

• Bit set, ratchet & knife

• Pliers & cutters• Hammers & tape

measure• Adjustable wrench• Punch & chisel Set

• 11 drawer roller cabinet with power

tool cupboard

1480(W) x 480(D) x 1145(H)

CUSTOMISED EDITION

SP50628

$1995406PC FIELD

SERVICE TOOL KIT• 6 - 26mm & 1/4” - 1” ROE

spanners• 1/4”, 3/8” & 1/2”Dr sockets &

accessories• Screwdrivers, Hex & TORX keys

• Pliers, cutters & adjustable wrench

• Foldback knife & Inspection mirror

• Pick up tool & pick set• Magnetic parts tray

• Circuit tester & multimeter• Hammer & tape measure

• Screw extractor set• 7 drawer field service box

890(W) x 510(D) x 615(H) SP50115

$2595

NEWNEW

NEWNEW

BUILT-IN POWER BOARD WITH 4

POWER OUTLETS & 4 USB PORTS

BUILT-IN POWER BOARD WITH 4

POWER OUTLETS & 4 USB PORTS

488PC METRIC/SAE SUMO SERIES

POWER HUTCH TOOL KIT

1226w x 1610h x 480d

SURGE PROTECTED

• 1/4”, 3/8” & 1/2”dr sockets & accessories

• ROE, stubby ROE & geardrive spanners

• E TORX sockets & spanners

• 1/2”dr impact sockets, inhex & torx bits

• Adjustable wrenches• T-handle hex & torx keys• Hammers soft/hard, ball

pein & dead blow• Pliers, cutters & wire

strippers• Hand riveter Ratchet set

• Burr set• Digital multimeter• Work light• Filter wrench • Metal rulers• 5 drawer hutch• 13 drawer roll cab.

276PC METRIC/SAE SUMO SERIES

POWER HUTCH TOOL KIT

1226w x 1610h x 480d

• ROE spanners• 1/4”, 3/8” & 1/2”Dr

sockets & accessories• Screwdrivers• Pliers & cutters

• Hex & TORX keys• Adjustable wrenches• Hammer & hacksaw• Tape measure• Punch & chisel set

• 6x tool storage trays• 5 drawer Sumo

Hutch• 13 drawer Sumo

roller cabinet.

CHARGE YOUR CORDLESS TOOLS & MOBILE PHONE

SP50550

$3495

SP50554

$4995

• Steel pegboard rear wall• SP Cliklok on all drawers• Anti Slip Matting• Impact Gun not Included in Kit

4

AIR TOOLS

WWW.SPTOOLS.COMFOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

NEW

NEW NEW

NEW

NEW

SP-9149

$3491/2”DR IMPACT WRENCH

TORQUE SETTINGS

• Lightweight Composite Body• Twin Dog Hammer Mechanism• 8 Vane Rotor

FORWARD REVERSESETTING 1 325Nm 369NmSETTING 2 368Nm 413NmSETTING 3 569Nm 575NmSETTING 4 596Nm 596Nm

• Max torque: 1190Nm

1700NmBOLT BUSTING TORQUE

• Bolt busting torque: 970Nm• Head size: 93mm

1/2”DR STUBBY IMPACT WRENCH

PLUS BONUS IMPACT SOCKET RAIL SET Bonus valued at $45

PERFECT FOR HARD TO REACH AND

CONFINED AREAS

SP-1141B

$229

VDE 1000V INSULATED PLIERS

VDE 1000V INSULATED CUTTERS

• Chrome vanadium steel• Induction hardened

cutting edges

• Chrome vanadium steel• Induction hardened

cutting edges

SP32009

$32.50

SP32209

$35

• Insulated grip handles

• 200mm

• Insulated grip handles

• 180mm

c-CLAMP LOCKING PLIERS

MODEL SIZE PRICESP32655 150mm $25.00

SP32656 275mm $35.00

SP32657 380mm $50.00

SP32658 450mm $55.00

SWIVEL PADMODEL SIZE PRICESP32650 150mm $25.00

SP32651 275mm $35.00

SP32653 450mm $55.00

STANDARD

• Large clearance jaws• soft grip coated quick-

release trigger• Heavy duty knurled

adjuster nut

AVAILABLE IN SWIVEL PAD & STANDARD

150mm

275mm

380mm

450mm

FLUSH CUT DIAGONAL CUTTERS• Forged chrome molybdenum

Steel blades for increased strength and durability

• 125mm

WELDING CLAMP LOCKING PLIERS

SP32645

$29.95

230mm

VDE 3PC INSULATED PLIER SET - 200mm

SET INCLUDES:• High leverage

long nose pliers, combination pliers & diagonal cutters

• Chrome vanadium steel• Induction hardened cutting

edges• Insulated grip handles –

1000V VDE• Ergonomical and

comfortable handles featuring slip guards for added safety

SP32909

$89

HIGH LEVERAGE DIAGONAL CUTTERS

180mm

SP32207

$25

VDE 1000V INSULATED LONG NOSE PLIERS- 210mm

SP32109

$32.50

SP32203

$18

NEW

NEW

NEW

PLIERS

5WWW.SPTOOLS.COM

IMPACT SOCKET SETS

MODEL DRIVE SIZE PRICESP21310 1/4"Dr 145mm $25SP22310 3/8"Dr 200mm $35SP23310 1/2"Dr 250mm $45SP24310 3/4"Dr 450mm $125

LOW PROFILE (STUBBY) SOCKET SETS

Maximises contact on the flat sides of the bolt or nut, not the points.

FLAT DRIVE TECHNOLOGY

1/2” DR INHEX IMPACT SOCKET SETS

MODEL PIECE SOCKETS INCLUDED PRICESP20255 10pc Metric • 10, 11, 12, 13, 14, 15, 16, 17, 18

& 19mm$65

SP20355 12pc SAE • 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24mm

$89

MODEL PIECE SIZE PRICESP20370 9pc Metric • 4, 5, 6, 7, 8, 10, 12, 14 & 17mm $125SP20375 9pc SAE • 3/16, 7/32, 1/4, 5/16, 3/8, 7/16,

1/2, 9/16 & 5/8”$125

AVAILABLE IN METRIC & SAE SETS

All SP Tools sockets and accessories are manufactured from high grade chrome vanadium steel and exceed international DIN and ANSI standards.Designed to withstand the rigors of industrial and trade use.

WE STOCK IMPACT SOCKETS FROM 3/8"DR ALL THE WAY UP TO 2-1/2"DR

DID YOU KNOW

FLEX HANDLESFLEXHEAD STUBBY RATCHETS • Hinged joint head

• Chrome Vanadium Steel (Cr-V) for high durability

• Stubby length ideal for tight access applications

•43 Teeth

•Reversible•Chrome Vanadium

Steel (Cr-V) for high durability

Pictured: SP22310

SOCKET ACCESSORIES

MODEL SIZE PRICESP21330 1/4’’DR $25SP22330 3/8’’DR $35SP23330 1/2’’DR $69

MODEL DRIVE PRICESP21302 1/4"Dr $25SP22302 3/8"Dr $35SP23302 1/2"Dr $45

TRUSTED QUALITY

MODEL PIECE DRIVE SOCKETS INCLUDED PRICESP20121 23pc 1/4"Dr METRIC: 4 to 13mm

SAE: 5/32 to 9/16”$69

SP20220 22pc 3/8"Dr METRIC: • 8 to 19mmSAE • 1/4 to 3/4”

$95

AVAILABLE IN 1/4"DR & 3/8"DR SETS

IDEAL FOR LOW CLEARANCE AREAS WHERE SPACE IS LIMITED

SOCKET RAILS

NEW

NEW

NEW

150mm

275mm

380mm

450mm

MODEL TYPE PRICESP20235 Stubby $39

3/8” DR METRIC STUBBY SOCKET RAIL SET - 10PC• 10, 11, 12, 13, 14, 15, 16,

17, 18 & 19mm Sockets

3/8’’DR SPLINE BIT SOCKET RAIL SET

SPLINE - 7pc• M4, M5, M6, M7, M8, M9 & M10• 1 x Socket Rail SP20543

$45

E-TORX - 12pc• E4, E5, E6, E7, E8, E10, E11,

E12, E14, E16, E18 & E20

MODEL TYPE PRICESP20550 Regular $45SP20551 Deep $89

METRIC - 7pc• 4, 5, 6, 7, 8, 9 & 10mm

• 1 x Socket RailP/N: SP20547

SAE - 7pc• 1/8, 5/32, 3/16, 7/32,

1/4, 5/16 & 3/8” • 1 x Socket Rail

P/N: SP20542

SPLINE - 7pc• M4, M5, M6, M7,

M8, M9 & M10 • 1 x Socket Rail

P/N: SP20544

3/8’’DR HEX BIT RAIL SETS 100MMAVAILABLE IN METRIC, SAE & SPLINE

EACH

$55

STUBBY IMPACT SOCKET RAIL SETS

3/8’’DR E-TORX SOCKET RAIL SETS - 12PCAVAILABLE IN REGULAR & DEEP SOCKET VERSIONS $49

FROM

3PC WOBBLE EXTENSION SETS

• T20, T25, T30, T40, T45, T50, T55, T60 & T70

9PC 1/2” DR TORX SOCKET SET

SP20380

$125

NEW

NEW

6

SPECIALITY TOOLS

WWW.SPTOOLS.COMFOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

• Test battery CCA, voltage, internal resistance, health and charge.• Test cranking and charging (Alternator) systems.• Battery test result: good battery, good battery & recharge, charge & retest, replace, bad cell & replace.• Protection of short circuit and reverse connection• Review history record• Print function (via USB cable)

DELUXE BATTERY ANALYSER

SP61062

$139

NEW

QUICK SWITCH 2-WAY DIAGNOSTIC PUMP KITQUICKLY SWITCH BETWEEN PRESSURE & VACUUM MODES• 2-Way pressure and vacuum test functions• Intuitive rotary dial mode switch• High volume effciency in both pressure

and vacuum modes• Manufactured from reinforced

composite materials• Integrated rear mount gauge• High quality hoses with quick

conect fittings• Custom blow mold storage case

SP80020

$285

DIGITAL TORQUE WRENCHES• Digital Torque Value Readout• +/- 2% Accuracy• Counter Clockwise & Clockwise

Torque Capable• Peak Hold & Track Mode

Selectable

• Digital torque-angle value readout

• +/- 2° (rotating 90° at speed of 30°/sec)

• +/- 1% or +/- 2% for torque accuracy (CW)

• CW and CCW operation

• Engineering Units (Nm, ft-lb, in-lb, kg-cm)

• Auto sleep after about 5 minutes idle

REVERSIBLE RATCHET HEAD

MODEL DRIVE RANGE LENGTH PRICESP35355 1/2” 10-200Nm 530mm $499SP35356 1/2” 17-340Nm 650mm $519

DIGITAL DISPLAY

FLEX HEAD DIGITAL TORQUE WRENCHES

TORQUE WRENCHES

NEWMODEL DRIVE RANGE LENGTH PRICESP35256 3/8” 6.8-135Nm 470mm $599SP35357 1/2” 10-200Nm 680mm $699SP35358 1/2” 17-340Nm 680mm $749

• L shape design allows for increased flexibility when connecting to difficult to access tyre valves

• The air chuck can rotate 360° and is paired with a soft rubber tube to increase the flexibility during use

Accuracy: ±1psi/0.1bar

TYRE PRESSURE GAUGE - DIAL

SP65508

$99

4PC TELESCOPIC INSPECTION MIRROR & PICK UP TOOL SET

Swivel head telescopic mirror:• Extends 250-925, Ø 57mmTelescopic pick up tool:• Extends 160-645mm

• Easily retrieve small, hard to reach objects

SET INCLUDES:3x interchangeable magnetic heads • 1.5kg magnetic swivel head pick up tool• 1.5kg magnetic pick up tool• 0.5kg magnetic pick up tool

SP31490

$29

• Used for removal & re-fitting tank sender moulding rings

• Range: 75-160mm diameter

• Use with a 24mm spanner or socket

3 LEG FUEL TANK SENDER SPANNER

SP64067

$29

• T-Handle design with hex key fittings on all three ends for quick and easy operation

• High quality chrome vanadium steel

• T-Handle locking slides for easy adjustment in hard to reach areas

• Sizes included: 2.5, 3, 4, 5, 6, 7, 8 & 10mm

8PC METRIC SLIDING T-HANDLE HEX KEY SET

SP34710

$99

$25

NEW

NEW NEW

NEW

NEW

7WWW.SPTOOLS.COMFOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT

Patented

COB LED HEADLAMP WITH MOTION SENSE ON/OFF• Ultra bright 3w COB LED headlamp• Brighness control - 2 settings 300 &150lm• Smart on/off motion sensor• 45° tilt light for flexible light positioning• Ultra lightweight design• Adjustable headband with non-slip grip SP81492

$79ionLiBattery

Easily turn the headlamp on and off by simply swiping your hand in a downward motion in front of the motion sensor. This allows you to quickly turn on the light when you need it and off when you dont.

• Ultra bright 6W COB LED• Brightness setting 1: 300 Lumens

with approx. 3 hours run time• Brightness setting 2: 600 Lumens

with approx. 1.5 hours run time• 360° swivel head

360° SWIVEL HEAD

SP81449

$69ionLiBattery

COB LED ULTRA BRIGHT WORKLIGHT/TORCH

• Ultra bright 6W COB LED• Brighness control - 3 settings

Worklight (Setting 1): 150 Lumens Worklight (Setting 2): 300 Lumens Worklight (Setting 3): 700 Lumens

• Bright LED torch/top light: 120 Lumens• Strong magnetic base supports operation in

a huge variety of angles and positions.• 360° fold out swivel hook

SP81457

$99ionLiBattery

Strong magnetic base supports operation in a huge variety of angles and positions. Includes fold out 360° swivel hook

COB LED COMPACT SWIVEL HEAD WORKLIGHT

SMD LED WORKLIGHT/ TORCH• SMD LED Magbase • Super brilliant, 250%

brighter• Lithium-ion

Rechargeable

LED PEN TORCH/ WORKLIGHT• High power COB LED• Pivoting magbase - 180 °• Swiveling magnetic

pocket clip • Rechargeable

LED FLASHLIGHT - ADJUSTABLE BEAM

Recharges using a vehicles

on board 12v outlet

• Built-in Rechargeable Lithium-ion Battery

• Adjustable focal length

• 130 Lumens

SP81456

$99

SP81490

$25

SP81443

$25

RECHARGEABLE MINI COB LED OPTICAL LENS FLOOD LIGHT & MAGNETIC SWIVEL BRACKET

CORDLESS LEDFLOOD LIGHTING

• High power 10w COB LED light• Multifunctional work lamp ideal for applications

where power is limited• 2 brightness settings: 1000Lumins & 500Lumins• 3 to 6 hour run time• Compact “pocket” size• Includes 180° rotatable magnetic bracket• Rechargeable micro USB system• IP65 – Resistant to water and dust infiltration• Universal clip secured by M8 connector• Includes 12v car charger adaptor

• Adjustable Height: 950mm to 2000mm

• Tripod holds up to 4 cordless COB LED flood lights

• Lightweight & portable

Kit includes:• 4x Mini COB LED

flood lights• 1x Adjustable

tripod

COMPLETE FLOOD LIGHT KIT

SP81489

$420SP81482

$99

ALS

O A

VAIL

ABLE

AS A

TRIP

OD K

IT

LED MAGBASE WORK LIGHT• 30 LED – 1200LUX• 5 LED spot lights –

200LUX• Ultra bright

ionLiBattery

SP81455

$89

SMD LED SLIMLINE WORKLIGHT/TORCH

• High power SMD LED worklight with brightness settings: 280 & 150Lumins

• Bright LED torch/top light - 50Lumin• Super slim design for hard to reach

areas• Special optical lens offering 90° flood

light compared to the 30° from normal work lights

• Car charger included

SP81442

$69ionLiBattery

PREMIUM UNDER BONNET CORDLESS LED WORKLIGHT• High power SMD LED worklight• Low heat emission• Brighness control - 2 settings• 1000 & 500 Lumen• 360° Swivel light• Diffused lens for softer

lighting and reduced shadow

EXTENDABLE1150mm to 1800mm

• Rechargeable • Wide 120° light spread• Battery type: Lithium-ion SP81466

$199

SLIMLINE COB LED WORKLIGHT & TORCH• Ultra bright COB LED

worklight - 600Lumin• High power LED torch/top

light - 120Lumin• Adjustable dimmer

switch worklight• 360° swivel ball

joint magnetic base

• Base tilt to 45°• 180° fold out hook• Rechargeable

Lithium-ion

SP81444

$99

LED MAGBASE WORK LIGHT• 6 SMD LED – 4500LUX• 350 lumen• Super bright• IP65 - dustproof & water

resistant

SP81450

$89ionLiBattery

NEW

NEW

NEW

NEW

NEW

NEWNEW

LIGHTING

HAND TOOLSCORDLESS TOOLS

18V 1/2”DR IMPACT WRENCH KIT

18v 1/2’’dr impact Wrench• Torque: 690Nm• Variable speed switch with brake• Powerful Brushless Motor

18v 2.0Ah Battery Pack• Compact • Lightweight• Powerful

18v 4.0Ah Battery Pack• More Power for longer• Max Lithium

18v Battery Charger

SMD LED Work Light/Torch

PLUS BONUS

PLUS BONUSSMD LED Work Light/Torch

Valued at $99

KIT INCLUDES:

SP81133

$699

970NMBOLT BUSTING TORQUE

LIGHTWEIGHTCOMPACTDESIGN

168 mmINCLUDING ANVIL

INCLUDES:2x Battery Packs

SP81985

$8916V CORDLESS GREASE GUN• 450cc cartridge size• 750mm ultra-flexible hose• 6000psi max delivery

pressure• 70g/min flow rate• Air bleed valve

simplifies air removal during loading

• Multiple loading options (cartridge, bulk & suction)

• Non-slip finish for better grip• Charging Time: 1 hour auto cut-off

(±10min)

SP81513

$369

Includes 2x 2.0Ah Batteries & Charger

1900RPMSPEED

PAD SIZES: • Polisher : 3” • Sander: 2”

SP81356BU

$219Battery & charger not includedSKIN ONLY

NEW

16V SANDER/POLISHER

• Two speed gear box• Variablespeed switch• Side handle includedINCLUDES:Sanding & Polishing pads,Sponge Bonnets & Sanding Discs

All prices exclude GST and are available between 1st August-30th September 2019. Prices may vary in some areas due to freight costs. All products in this brochure were available at the time of printing.SP Tools NZ Ltd will do everything possible within reason, to maintain stocks of products advertised but cannot be responsible for unforeseen shortfalls beyond their control. E & O Copyright. WWW.SPTOOLS.COM

While SP Tools NZ Ltd makes every reasonable effort to ensure the accuracy and validity of the information provided. Pricing and specifications are continually changing, SP Tools NZ Ltd reserves the right tochange at any time without notice, the information contained in our Trade Catalogues, Promotional Brochures, Catalogues and all such print media, and makes no warranties or representations as to its accuracy.

Please note: Images are for illustration purposes only, contents and colours may vary.

NEW

NEW

SP81983

$79

16V BATTERY CHARGER

16V BATTERY PACK 2.0AH LI-ION