15 Fishing Tools
-
Upload
rizki-mining -
Category
Documents
-
view
228 -
download
3
Transcript of 15 Fishing Tools
-
8/17/2019 15 Fishing Tools
1/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Releasing and Circulating Overshots
Releasing and circulating overshot is LT-T type special external fishing tool used for fishing drill collar, drill
pipe, tubing and other fishes in drilling and work over operation.
Technical specification and parameters
-
8/17/2019 15 Fishing Tools
2/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Releasing Spears
In Drilling and work operation, LM-T type releasing spear is a tool mainly used for fishing af drill pipe, oil
pipe and casing from fish hole, it can be used with internal cutter, bumper jar etc,
Technical specification and parameter
-
8/17/2019 15 Fishing Tools
3/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Reverse Circulation Junk Baskets
LL-F type release circulation junk basket is used to catch all kinds of small junk objects such as cones, cutter
hand tools from bottom well. During drilling operation, it produces a local reverse circulation of fluid at wcore so as to effect a complete recovery of junk in the junk basket.
Technical specifications and parameters
-
8/17/2019 15 Fishing Tools
4/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Reverse Circulation Fishing Magnets
CLF type fishing magnets in petroleum and geology explorations is used for fishing of small fallen objects
the downhole, with some of advantages such as simple structure, easy to operate, permanent magnet to attra
small objects such as teeth wheel, palm, tong teeth and tool so that small objects in downhole are fished and thwell bottom is cleaned up.
Technical specifications and parameters
-
8/17/2019 15 Fishing Tools
5/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Taper Taps
Taper taps is a special tool cutting thread and fishing internally in dropped objects such as tubing, drill-pip
wash-over pipe, packer, water flow allocator, down-hole production allocator, the tool is especially a gre
success in catch of objects accompanied with couplings, the taper tap can effect different fishing operatiowhen equipped with RH thread or LH thread drill pipes and other tools.
Technical specifications and parameters
Three – Ball Fishers
Three – Ball Fisher is a special fishing tool
designed to catch Rod coupling or other tools
upset shoulders.
Technical specifications and parameters
-
8/17/2019 15 Fishing Tools
6/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Die Collars
Die collar is a special external fishing tool which is engaged on the outside wall of tubing objects such as
tubing and drill pipe. It can be used in fishing cylindrical objects without inner bore or stucked inner bore.
Technical specifications and parameters
Lifting – Lowering and Releasing Overshots
Lifting-lowering and releasing overshot is used to catch tubings and equivalent size pipe strings in casing. In th
event of pipe string becoming stuck, after down jarring the pipe string and by lifting up, the tool can be lift
out.
Technical specifications and parameters
-
8/17/2019 15 Fishing Tools
7/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Junk Subs
During drilling process LB type junk sub is applied mainly for fishing of shivers and fallen objects such
carbide tooth, drill bit and bearing which can not be carried out of hole by conventional fluid circulating, etc.
process important functions to keep hole cleaning, increase bit service life, reduce and prevent drill bit frounexpected damage. The tools are available with all sizes and super performance.
Technical specifications and parameter
-
8/17/2019 15 Fishing Tools
8/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Releasing and Reversing Overshots
DLT-T type releasing and reversing overshot, a new type of fishing tools, has many advantages owned by
various overshot, box tap and the like. Its distinguishing features are as following to unscrew and recover the
stuck fish to release the fish down hole if accessory to circulate the washing fluid.
Technical specifications and parameters
Reversing Subs
Reversing sub is also called reversing spear with is a special tool for reversing stuck drill steam above stuck
point in drilling and work over operation. When make fishing or reversing, if fallen object is stuck or fail to bereleased, the tool can released from thread connection of reversing sub to take out fishing tool.
Technical Specification and parameters
-
8/17/2019 15 Fishing Tools
9/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Reversing Spears
DLM-T type reversing spear in reversing operation owns two functions which can go fishing and transfer left
hand torque at the same time, It is a special internal fishing and reversing tool which can replaces left – han
taper tap.
Technical specifications and parameters
Mechanical Internal Cutters
Mechanical internal cutters is a special tool to cut pipe in pipe string, with exception of coupling, it can cut
any position of fish (fallen object), during cutting operations, the releasing spear can be connected abointernal cutter, after finish cutting, pipe string above cutting position can be lifted out at one time.
-
8/17/2019 15 Fishing Tools
10/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Sliding Block Spears
The sliding block spear is an internal catch fishing tool which can be used both to catch drill pipes, tubing
washover pipes, liners, packers, water allocators and reverse stuck fishes or used with others tools the bla
spears are furnished in two types releasing single block spear and releasing two blocks spear.
Technical specifications and parameters
-
8/17/2019 15 Fishing Tools
11/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Internal Hook
The internal hook is used inside casings or tubings to catch all kinds of ropes and other fishes such as wire
lines, cables, logging steel pieces, paraffin cutters, etc. internal books are available in two types live (adjustabl
internal hook and dead (fixed) internal hook.
Technical specifications and parameters
External Hook
The external Hook is used inside casings or tubings to catch all kinds of ropes, lifting bails, hollow shocylinders, short rope slings such as wirelines, logging steel pieces, cables, etc.
Technical specifications and parameters
-
8/17/2019 15 Fishing Tools
12/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Cable Fishhook
The cable fishhook is used not only to catch electric pump cables or wirelines but also to catch bent sucker ro
broken in casings.
Technical specifications and parameters
Finger Type Junk Basket
The finger type junk basket is a simple structured and easy made general fishing tool specially used for fishinof down-hole irregular catches such as steel balls, valve seats, bolts, nuts, paraffin cutter, tong insets spanne
and rubbers, etc.
Technical specifications and parameters
-
8/17/2019 15 Fishing Tools
13/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
H Type Safety Joints
H type safety joint, which is installed on the position required for subsurface drill stem and can bear in fishingoperation all kinds of loads for pulling or pressing and used to transmit torque, is a subsurface safety equipmen
In down hole operation, when necessary, the safety joint can be easy to discharge off so as to take out the drill
stem above it, it is easy to connect the safety joint to ensure a continuous fishing operation when running in hoagain.
Technical specifications and parameters
AJ Type Safety JointsAJ type safety joint is a specialized sub consisting of two parts. The specialized sub takes protective effect for
drilling, repairing and test oil (gas) engineering etc, It is used to remedy well bottom accident and on the way
test in drilling and coring operation.
Technical specifications and parameters
-
8/17/2019 15 Fishing Tools
14/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Cutting Pilot Mill Shoes ( Available with common type and high efficient type
Cutting pilot mill shoe can be used to mill downhole junks with inner bore and shaking junks, such as drill
pipes, drill collars and tubings, etc.
Technical specifications and parameters
Taper Mill Taps
Taper mill tap is a special tool for opening up a passage in casing
Technical specifications and parameters
-
8/17/2019 15 Fishing Tools
15/15
FISHING TOOLS
PT. BRANKY BUMIASRIJl. Agung Utara Blok M Segitiga Senen No.1
Sunter Agung Podomoro – Jakarta Utara 1435
Phone : (62-21) 6411144 · 640496
Fax : (62-21) 641116
Email : [email protected]
Website : www.ptbba.co.
Flat – Bottom Junk Mills, Concave – Bottom Junk Mills
MP type flat – bottom junk mill and MA type concave bottom junk mills is bead welded YD alloy or others
abrasive material on the bottom to mill downhole fallen objects. (available with common type and high-efficie
type ).
Technical specifications and parameters