1212 Wind power
-
Upload
ketan-vador -
Category
Documents
-
view
217 -
download
0
description
Transcript of 1212 Wind power
Wind Powered Water Pump
Guide:-Dr.S.V.Karmare
PREVIEW
•Need of non conventional •Principle•Working•Application
construction
construction Parts:-
• Stand- 1” Metal pipe. • Tee-1” Metal. • Foils - Sheet Metal 25*20*5. • Nut and Bolt-25. • Cycle disk plate -16cm diameter. • UPVC pipe-1”pipe and ¾”pipe. • Non Return Valve - 1”inch. • Bearing- Two 6001z and one 6003z • Cycle Rim- 360cm diameter, one with spoke and one without
spoke.
Stand- 1 Metal pipe.(30 Kg )
Tee-1’’ Metal
Foils - Sheet Metal 25*20*5.
Cycle Rim- 360mm diameter, one with spoke and one without spoke.
Cycle disk plate -160 mm diameter with 25 nut and bolt
Assembly
Calculationpower in the wind • P=1/2 Rho A V^3 watt?/m^3 (Rho at sea level 1.2kg/m^3 )
Advantages
• Wind power is a clean energy source that can be relied on for the long-term future.
• Wind is a source of energy which is non-polluting and renewable.
• The wind is free and with modern technology it can be captured efficiently
• A wind mill reliable, cost-effective, pollution free. • It is affordable, clean and sustainable. • Wind turbines take up less space than the average power
station. • Wind is free, and we are able to cash in on this free source of
energy
Disadvantages
• High overall weight. • Weather dependent. • Large area needed. • Wind energy is capital intensive. • Wind energy system noisy in operation. • Wind energy has low density but is favorable in many
geographical locations from cities and forests. • The strength of the wind is not constant and it varies from
zero to storm force
CONCLUSION
• The kinetic energy successfully converts in to mechanical energy to pump the water. • It is pollution free way to pump water
from ground. • It is alternative solution of water
pumping.
References
• G.D.RAI-’Non -Conventional Energy Sources’,O.P.Khanna,FORTH EDITION• Non-Conventional Energy Resources’ B.H.Khan 2nd
Edition• Design of Machine Element by Bhandari• Design of Machine Element by V.B.Bhandari• Research paper by R.K.Sharma for efficent operation of
wind powerd
THANK YOU……