1.2019 SAFETY TECHNOLOGY · 2019-05-07 · 6 Safety shaper fence 215 Of cast aluminum, with...
Transcript of 1.2019 SAFETY TECHNOLOGY · 2019-05-07 · 6 Safety shaper fence 215 Of cast aluminum, with...
Industry tested working aidsProtective devices for standard machines
of all manufacturers
SAFETY TECHNOLOGY1.2019
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
2
Experience pays off
For more than 100 years, PANHANS has been an important producer of car-pentry processing machines, long active around the world.
Many patents and global novelties prove developmen-tal power and continuous progress.
Standards have been set with many products that improve the processing of materials and make work with standard machines safer.
Competent service provider
Customer-oriented workmeans more than just thatto deliver the right products.Advice, delivery and installa-tion, as well as a comprehen-sive service package, which is also available after purchase - HOKUBEMA customers benefi t from it.
PANHANS Woodworking and plastics processing machines from HOKUBEMA
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
3
We rely on quality
HOKUBEMA stands for solid German mechanical enginee-ring by employees who have learned their trade.
Experience that is handed down over generations, combined with the latest knowledge, ensures a consistently high value retention.
Of course, this also includes the professional handling of complex electronic controls.
Input from practice
Close contact with the processor is a high priority.All our commitment goes to those who work with our machines.
The next generation plays an important role here. The professionals of the future are important to us.
Regular exchange of ideas with different educational institutions is a matter of course.
SAFE • ERGONOMIC • ECONOMIC
4
ShapingPlaning protection devicesSwing protectionPivoting auxiliary stopSupply drawerThickness table extensionMagnetic planing knife quick-setting devicePlaning knifeTERSA-knifeAccessories for knife shaftsElectronic key system
14 - 15151616161617171839 - 41
MillingShaper fencesSwivel devices Shaper, protection and pressure facilitiesMounting bracketSafety fence platesSafety rulers and hollow boardIntegral fence platesFeederFence for curved workpiecesTenon cutting and slitting deviceCONTERMAXClamping stripKickback protectionTable extension with kickback protectionElectronic key systemLong-term lubrication cartridgePneumatic clamping device
67778891010 - 11111212121239 - 414242
SawsBand sawsBand saw guideSpecial oilBall bearing back rollsRubber cork bandagesSuper glueProtection cover for band saw guidesTable extension for band sawsCirQuickInsert board for band sawsTable insert for band sawsWooden sliding stickCircular sawsCircular saw feederDouble sided mitre fenceWorkpiece holder SIMPLYCircular saw protectionProtection coversCrosscut fenceSliding handleSliding stickSafety-MaxSafety-CutSafety-Cut plusSafety-PowerFront and rear sawing aid Multi-CutRiving knives
20 - 24202325 2526262627272729303132333334 - 353434343535353536 - 37
GeneralErgonomic work matsLevellerElectronic key systemDrill chuck for long hole drilling machinePneumatic clamping deviceLong-term lubrication cartridge
383839 - 41424242
Working Aids / Lifting/Assembly tablesRoller block STATIVLifting tables and accessories
4444 - 46
5
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
sPl
anin
gO
ther
MILLING
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
6
Safety shaper fence 215
Of cast aluminum, with break-out free alu-splinter tabs, overall stop adjustment by handwheel, maximum tool diameter 250 mm.Simple assembly on a shaper machine table with drilling template, bore distance clamp lever 365 mm. Net weight: approx. 46,1 kg With gray-cast iron fence plates 2053
ItemNo.
ATTENTION: In Europe, shaper with manual infeed requires a tool cover!The following are suitable: Shaper and pressure device Gamma V Type 1629, Item No. 2204Shaper, protection and pressure device Centrex Type 1624,Item No. 2007
!Safety shaper fence 216
Of cast aluminum, with break-out free alu-splinter tabs, with bila-teral fi ne adjustment, overall adjustment via hand wheel according to digital display, adjustable to 1/10 mm against the tool. Max. tool ø up to 250 mm.Easy mounting on the shaper machine table with drill template, bore distance clamping lever 365 mm.Net weight: 46.5 kgWith gray-cast iron fence plates
Safety shaper fence 204
Of cast aluminum, with break-out free alu-splinter tab. Comfort clamp for quick fastening of the shaper fence on the machine table. With bilateral hand wheels for overall adjustment of the fence plates and single adjustment of the stop plate on the right. Reading via 2 digital displays to an accuracy of 1/10 mm.Max. tool ø up to 250 mm. Simple mounting on shaper machine table. With drilling template. Drilling distance 585 mm.Net weight: 66.0 kgWith gray-cast iron fence plates
Without fence plates, rest as above 2059
2036
4401
Without fence plates, rest as above 2127
Without fence plates, rest as above 4402
1 set adapters for mounting of integral fence plates 2128
Clamping lever for shaper fence 215 / 216complete with washers 2244
Price/pcs.in €
2,077.70
1,868.70
2,660.50
2,454.60
33.00
5,004.30
4,655.90
98.90
All prices plus VAT, plus freight.
PRO TECT
Information and videos www.hokubema-panhans.de
or
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
al
2007
2204
4349
6609.0421
Subject to changes!
Shaper and protective device CENTREX 1624
Fits all shaper fences.Secure fastening of the work pieces for manual shaping.The special shape of the pressure shoes warrants precise work piece control in all shaper works. Smoothly adjustable horizontally and vertically. Good view of the work piece.
Necessary mounting parts for shaper fence 215/216:mounting bracket GAMMA V and Spacer item-no. 6609 0421
Net weight: 9.5 kg
Shaper, protective and pressure deviceGAMMA V 1629Fits all shaper fences, smoothly adjustable horizontally and vertically, arresting in folded-up position.
Necessary mounting parts for shaper fence 215/216:mounting bracket GAMMA V.
Net weight: 7.3 kg
Swivel device 219
Manually hydraulicFor comfortable and secure lifting and pivoting aside of a PANHANS shaper fence into a neutral position without application of force.
Net weight: 44.0 kg
for CENTREX 1624 for mounting to a mounting bracket GAMMA V.
Spacer
1,032.60
498.30
357.90
Brackets, if required, must be adjusted on site
2110
Mounting bracket GAMMA V
Bracket for mounting of the shaping, protection and pressu-re device CENTREX 1624 and GAMMA V 1629 on PANHANS shaper fences 215/216. 29.60
32.00
All prices plus VAT, plus freight. 7
PRO TECT
2249
Pressure shoe for GAMMA V 1629 136.70
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
ItemNo.
Price/pcs.in €
Lift
ing/
Asse
mbl
y ta
bles
W
orki
ng A
ids
Cast fence plate
Splinter tab
Moulding board
Eccentric clamp piece
Rulers
Groove profi le rail
Slide block
PRO TECT
56
20,5
10
5,25
12
Safety rulers and moulding board – set
1 set = 5 safety rulers comprising:
- 3 rulers 260 x 3 mm- 2 rulers 260 x 6 mm- 1 moulding board, wood- 10 slide blocks, twistable, brass, with screws- 4 slide blocks, steel, with screws- 1 Allen key
Net weight: 1.3 kg
Safety fence plate set 208
For attachment to present shaper fences.
The set comprises:- 2 cast fence plates 500 mm length- 2 groove profi le rails- 2 splinter tabs, wood- 2 rulers 260 x 6 mm without slide block and screws- 3 rulers 260 x 3 mm without slide block and screws- 1 moulding board, wood- 8 slide blocks, steel, with screws- 10 slide blocks, twistable, brass, with screws- 1 Allen key- 2 eccentric clamp pieces
Total net weight of set: approx. 22.6 kg
Spare parts for safety fence plates 208
2073
2087
2038
2084
21162117
2086
2088
2044
2092
2062
2095
2085
2083 770.70
251.80
19.60
15.00
38.10
17.8018.30
19.7020.40
25.60
3.90
5.00
19.50
44.90
2093 199.50
8
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
ItemNo.
Price/pcs.in €
Cast stop plate
Groove profi le rail
Splinter tab, wood
Splinter tab, aluminum
Ruler without slide blocks and screws
Ruler without slide blocks andscrews
Moulding board, wood
Slide block, steel with screw for splinter tab and moulding board
Slide block, twistable, brass with screw for rulers
Allen key
Eccentric clamp with clamping lever screw
500 mm long
260 x 3 mm260 x 6 mm
300 x 3 mm300 x 6 mm
All prices plus VAT, plus freight.
PRO TECT
Spare parts
Versions
Integral-Anschlag
For attachment to present shaper fence.
For secure and precise work at spindle moulders.The integral fence plates offers an uninterrupted guide surface for all shaper work at the tool. Precise adjustment to tool diameter and height is achieved by smooth adjustment.The hard coating of the guide rods warrants a continuous guide surface at all times.
Integral fence plates
2120
2121
2123
2124
2125
2126
2128
2122
1,123.30
1,218.40
1,157.10
1,304.90
98.00
For secure guidance of thin work pieces at the integral fence plate. The fi ll rod closes the lower cutout in the left cartridge of the integral fence plate, creating an uninterrupted guide surface in this area as well. The surface is tempered with a hard-coat layer.
Net weight: approx. 0.2 kg
Indispensable for shaping easily tipping work pieces with the integral fence plates. The spacer is clamped to a groove of the integral fence plates at the desired height.
Net weight: approx. 0.4 kg
Filling bar for integral fence plates
Spacer for integral stop
2119
2118
Subject to changes without prior notice!
41.10
55.90
31.40
5.70
35.10
9
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
ItemNo.
Price/pcs.in €
All prices plus VAT, plus freight.
Both sides 500 mm long
Left side 500 mm longRight side 650 mm long
Left side 650 mm longRight side 500 mm long
Both sides 650 mm long
1 set adapters for mounting integral fence plates on a shaper fence 204
net weight approx. 14.7 kg
net weight approx. 17.3 kg
net weight approx. 17.3 kg
net weight approx. 20.3 kg
Bottom strip
Strip
Axial pin
Feeder PV 84
- 4 rollers 120 x 60 mm- 8 speeds (2/4/5.5/6.7/11/13/16.5/33 m/min)- Stand with extended extension arm 1050 mm- Right- and leftward rotation with 2 speeds, switchable via switch- More speeds adjustable via 2 steps switching gear- Metal gear for adjustment of another 4 speeds- Individual horizontal and vertical usage options- Individual adjustment
Net weight approx. 68.0 kg
Spare infeed roller at 2-part rimSpare infeed roller with vulcanized rim
Special accessories
Ring fence TAPOA 1639
for tools up to 160 mm ø
For accident-safe shaping of curved work pieces on the spindle moulder, for tools up to 160 mm diameter, with pressure and protection ring, start-up ring and stop bar, with fi ne adjustment of the shaping depth, extraction nozzle 120 mm diameter.
The ring fence can be attached and adjusted to any spindle moulder.Work pieces can be processed in left- and rightward operation.The transparent protecting cover permits best view of the tool.
Net weight: approx. 5.5 kg
Feeder Variomatic 4 N
- 4 rollers (shared roller width 2 x 25 mm, roller diam. 120 mm)- Continuously variable speed 2 - 18 m/min- Right- and leftward rotation- Fast turning from horizontal to vertical operation- Simple swivelling away and positioning- Memory-Look-System for accurately repeatable fi xing- Comfortable stand- Numerical altitude indicator- Extension arm 1050 mm long
44,00
4023
40244027
2246
4103
1,420.00
30.3045.30
2,734.70
404.40
10
PRO TECT
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
ItemNo.
Price/pcs.in €
All prices plus VAT, plus freight.
Ring fence KOALA 1637
for tools up to 220 mm ø
For accident-safe shaping of curved work pieces on the spindle moulder, for tools up to 220 mm diameter, with pressure and protection ring, 2 start-up rings and stop bar, with fi ne adjust-ment of the shaping depth, extraction nozzle 120 mm diameter.
The ring fence can be attached and adjusted to any spindle moulder.
Work pieces can be processed in left- and rightward operation.
The transparent protecting cover permits best view of the tool.
Net weight: approx. 11 kg
Protecting cover 1641
For tenon cutting and slot discs up to a max. diameter of 350 mm, strong steel sheet, with adjustable protective lid, with extraction nozzle diameter 120 mm, distance of attachment screws 560 mm.
Net weight: approx. 18.4 kg
Tenon cutting and slitting device 1376
For usage on spindle moulder, simple mounting on the machine table, with adjustable mitre fence 30°, up to 150°.
Length of the base plate 1000 mmSliding path 710 mmSliding plate size 295 x 255 mmHeight of slide plate approx. 56 mm
Net weight: approx. 44.5 kg
Recommended accessories: protecting cover type 1641, item no 2235.
Long-term lubrication cartridge
Pneumatic clamping device
Electronic key systemfor machine activation
detailed information s. page 42
detailed information s. page 42
detailed information s. pages 39 - 41
2245
2221
578.60
1,784.30
577.502235
11
PRO TECT
Spare protective hood
for shaper fences 206, 207, 202 (as replacement for the original plastic protective cover)
177.002206
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
ItemNo.
Price/pcs.in €
All prices plus VAT, plus freight.
12
Clamping strip 212
For quick and secure insertion shaping of short work pieces.Stable, light-weight design, made of aluminum. Length 800 mm, clamp length 550 mm.
Net weight approx. 3.4 kg
Kickback protection 1648
For spindle moulder with table extensions, smoothly adjustable from 0 to 1500 mm, for accident-free insertion shaping of long and short parts.Delivery, incl. the attachment parts for mounting at present table extensions.
Net weight: approx. 12.4 kg
Recommended accessories: clamping strip type 212, item no. 3053
Table extension with kickback protection
For insertion shaping- Cross-stop, length 400 mm, smoothly adjustable. Swivels by 90° and easy to remove.- Safe and quick installation at the attachment rail.- Easy to move and simple to take off.- Supporting foot can be folded, ensuring minimum space requirements.- Table of anodised aluminium. Length 1100 mm, width 172 mm.- Without attachment rail.
Attachment rails
330 mm long430 mm long530 mm long830 mm long
CONTERMAX 221
For precise and quick profi ling of work pieces at the transverse side.The Contermax permits secure and economic work. Precise work piece guidance achieves high dimensional accuracy.The new clamp permits very fast changes.
Net weight: approx. 1.6 kg
Befestigungsschiene
44,00
3053
2002
3056
3057305830593060
3054 114.00
203.70
432.90
199.50
14.4015.3016.7023.30
PRO TECT
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
ItemNo.
Price/pcs.in €
All prices plus VAT, plus freight.
13
Hob
eln
PLANING
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
14
35
40 A
M 8
44,00
TXF 500 mm with two-part cover
TXF 650 mm with two-part cover
TXF 850 mm with two-part cover
Versions
Planing protection device 1570 for surface-planing machinescan be folded down in two parts The two-pieces version allows comfortable work even with large workpieces as there is no disruptive edge. Cover - fi xed part 400 mm - folding part 260 mm
A = 500 mm
A = 650 mm
A = 850 mm
optional covers for versions 1570 and TX-R
two-part fi xed part 400mm, foldable part 400 mm
Planing protection device TX-R 650 two-part, foldable for comb. surface and thickness planing machine
Gas spring for TXF 500/650
Gas spring for TXF 850
Spare parts
300 N
400 N
Planing protection device TX-R 650 with cover, fi xed part 450 mm, foldable part 300 mm, incl. swivel unit and adapter for fi xing to the take-off table.Especially for combined planing machines with foldable table.
3406
3407
3408
352.70
361.10
411.80
3415 391.70
3566
3567
3568
193.20
100.80
120.40
PRO TECT
Information and videoswww.hokubema-panhans.de
or
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
ItemNo.
Price/pcs.in €
All prices plus VAT, plus freight.
15
4111
4112
4182
4183
3446
3448
4702
4703
Spare parts
Self-acting swing protection 1560
The accident-protection device for surface and combined surface and thickness planing machines. This device offers the benefi t that the material to be processed is pressed to the stop inde-pendently. No adjustment is required, and the device is space-effi cient.
Size b = for planing width 410 mm
Size c = for planing width 510 mm
Versions
Net weight approx. 2.4 kg
Net weight approx. 2.8 kg
Net weight approx. 0.9 kg
Net weight approx. 1.0 kg
Net weight approx. 0.6 kg
Net weight approx. 0.7 kg
Planing protection - two-partTX-matic
Protection device with two-part, folding-down cover for surface and combined surface and thickness planing machines, with defl ected press-on pressure at height and side position via the wheels onto the workpieceThe wheels lift the protective cover up to the workpiece height. When the workpiece is pushed through, the protective cover lowers back to the starting position. This ensures best blade shaft covering.The wheels can be turned to the positions horizontal, vertical and 45° (thus pressure on machine table/surface fence).
For planing width 410 + 510 mm with two-part cover 420 + 320 mmFor planing width 630 mm with two-part cover 550 + 320 mm
Each incl. additional holding plate item no. 6103.1854 for reinforcement at assembly at the front sheet covers.
1 set guide rollers for TX-maticcomprising 4 rollers
Versions
Link carpet
Press-on part
595.40
608.10
141.90
147.80
162.60
185.80
50.00
50.00
PRO TECT
3414 225.00
34123413
1,027.201,092.70
Wooden push stick 2391
with fi xing magnets. For safe guiding of small workpieces on tableand panel rip and crosscut saws. Reduces the risk of accidents.
Packaging unit: 10 pieces3418 125.70
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
ItemNo.
Price/pcs.in €
All prices plus VAT, plus freight.
Link carpet 410 mm for swing protection type 1560
Link carpet 510 mm for swing protection type 1560
Press-on part 410 mm without mechanic, for type 1560
Press-on part 510 mm without mechanic, for type 1560
Gas pressure spring 410 mm, 300 N for type 1560
Gas pressure spring 510 mm, 400 N for type 1560
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
44,00
16
for secure surfacing of short workpiecesNet weight: approx. 0.6 kg
Robust steel-sheet construction for subsequent attachment to thickness planing machines. The automatic height adjustment in connection with the link chain resists the highest of loads. When planing long workpieces, the pressure beam is relieved and at the same time, tipping away of the workpiece is prevented.
Table size 1000 x 630 mmNet weight: approx. 44 kg
With strong magnetic adhesion, planing knife protrusion to 1/10 mm accuracy by fi ne adjustment, suitable for all knife shaft diameters of 80 to 145 mm.1 set = 2 pcs in practical wood cartridge
Net weight: approx. 0.5 kg
Pivoting auxiliary stop 1545
For secure surfacing of narrow work pieces at the surfacing fence.
Matching for surfacing fence length max. 1500 mm.Simple, toolless folding open and shutting permits immediate use.
Net weight: approx. 2.3 kg
3052
4496
2004
80 - 145 mm
Supply drawer 1515
3398 332.60
34.50
Thickness table extension 654
958.60
Adjustable magnetic planing knife quick setting devices 1533
209.10
PRO TECT
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
ItemNo.
Price/pcs.in €
All prices plus VAT, plus freight.
for secure surfacing of short workpiecesNet weight: approx. 0.6 kg
Thickness table extension 654
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
17
Versions HSS Steel (18 % Wolfram)* GRANAT RAPID
3304330633203307330833093377
Versions Proven permanent cutting steel GRANAT
3313331533213316331733183554
* for highest performance and a long service life
Recommended accessories:- Magnetic planing quick-adjustment devices- Knife shaft pressure spring
20044114
Length
410 mm 510 mm520 mm 610 mm 630 mm 640 mm 810 mm
Width
35 mm35 mm35 mm35 mm35 mm35 mm35 mm
Thickness
3 mm3 mm3 mm3 mm3 mm3 mm3 mm
Length
410 mm 510 mm520 mm 610 mm 630 mm 640 mm 810 mm
Width
35 mm35 mm35 mm35 mm35 mm35 mm35 mm
Thickness
3 mm3 mm3 mm3 mm3 mm3 mm3 mm
TERSA-spare knife
4094409540974119409640984099
Length
410 mm510 mm520 mm610 mm630 mm640 mm810 mm
Standard version
4121412241234125412641274128
Art.-Nr. Length
410 mm510 mm520 mm610 mm630 mm640 mm810 mm
HSS-quality version
for highest performance and a long service life
1 litre resin solvent concentrate1 steel cleaning brush, 1 brass cleaning brush10 HM-reversible blades 15 x 15 x 2.5 mm5 Torx©-screws M 6 x 151 torque wrench2 bit-inserts T 20
in the storage box
4647
Planing knife 1505
Service set for spiral blades
for cleaning and care
45.3046.7046.7054.9054.5058.5076.20
29.4075.5036.5041.2041.7044.9057.10
72.6083.6088.20
108.80115.60113.20147.60
209.102.30
24.2028.8029.3033.8035.5035.7044.70
176.30
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
ItemNo.
Price/pcs.in €
All prices plus VAT, plus freight.
ItemNo.
Price/pcs.in €
44,00ItemNo.
Price/pcs.in €
Knife shaft pressure spring
For lifting the knives, facilitates simple setting of the knives with magnetic planing knife adjustment devices (item no. 2004).7,65 x 0,8 x 50 mm
Knife shaft pressure barsBalanced, with screws R ¼“ SW 17, delivered in pairs
Length 410 mm510 mm520 mm610 mm630 mm640 mm810 mm
Standard version, height approx. 21 mm
Knife shaft screws
hardened, R 1/4“, SW 17
Net weight 0.02 kg
Version WIGO, height approx. 19 mmNet weight 0.02 kg
Recommended accessories:Narrow slot wrench SW 17
18
Narrow slot wrench SW 17
For knife shaft screws with a width across fl ats 17 mmNet weight: approx. 0.1 kg
4114
4087408840934089413140904092
4107
4075
4113
4113
Standard
WIGO
Electronic key systemfor machine activationdetailed information see pages 39 - 41
91.80103.20107.70121.40118.20127.80177.40
4.50
8.00
12.70
2.30
12.70
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
All prices plus VAT, plus freight.
19
BAND SAWS
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
44,00
1248
1250
1254
1256
1276
1277
3215
The heart of any bandsaw machine.
Standard design matching any bandsaw• Hardened back and side rollers fasten the saw blade in the correct position.• Operator-friendly fi ne adjustment, serial permanent lubrication, minimum maintenance• Stable build, smooth and wear-free saw blade guide• Long service life of the bandsaw blade• Fixing elements included in delivery
Net-weight 1.1 kg
1.0 kg
2.1 kg
1.9 kg
2.2 kg
2.0 kg
Special oil 1059
For lubrication of the side and back roller bearings.For APA band saw guide.Packaging unit = 5 bottles à 20 mlNet weight: approx 0.1 kg
Regular application increases the service life of the APA guide by a multiple.
High-performance band saw guideAPA 2
BEST
20
203.90
211.20
236.90
244.10
272.40
272.40
16.60
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
ItemNo.
Price/pcs.in €
Version size 1 top, for wheel dia. 300-500 mm and blade widths 3-25 mm
Version size 1 bottom, for wheel dia. 300-500 mm and blade widths 3-25 mm
Version size 2 top, for wheel dia. 600-900 mm and blade widths 5-40 mm
Version size 2 bottom, for wheel dia. 600-900 mm and blade widths 5-40 mm
For NE-processing and diffi cult to chip wood materials with ball-bearing back roller
Version size 2 top, with ball-bea-ring back roller, wheel dia. 600-900 mm and blade widths 5-40 mm
Version size 2 bottom, with ball-bearing back roller, wheel dia. 600-900 mm and blade widths 5-40 mm
All prices plus VAT, plus freight.
ItemNo.
Price/pcs.in €
Price/pcs.in €
Technical data Size II
• Back roller diameter• Bearing sleeve dia.• Back roller bolt dia.
• Side roller dia.• Bolt dia.• Bolt length
40 mm16 mm 8 mm
26 mm 8 mm11 mm
58 mm22 mm10 mm
40 mm10 mm22 mm
Size I
Spare parts for band saw guides APA type 2 Top guide
ATTENTION:When ordering spare parts, always indi-cate the size of the bandsaw guide. It can be determined using the diameter of the top or bottom back roller or side roller.!
1
23
4
5/6
7
8
9
21
Pos.
123456789
Designation
Side roller, complete* Back roller, complete** Locking capTommy screwCarry bolt 16 x 120 mm***Carry bolt 22 x 120 mm*** Clamp frontClamp rearLocking plug
Pcs.
211211112
Size I
12901046109711821146
126812691265
Spare parts for band saw guides APA type 2Top guide
* With bearing sleeve and locking plug** With bearing sleeve and locking cap*** Also available in other lengths
Size II
1291 1047 1099 1182
1270 1268 1269 1265
68.2063.303.603.60
17.40
11.6011.601.50
73.1069.80
5.003.50
16.9011.6011.60
1.50
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
All prices plus VAT, plus freight.
ItemNo.
* With bearing sleeve and locking plug** With bearing sleeve and locking cap*** Also available in other lengths
Technical data
• Back roller diameter• Bearing sleeve dia.• Back roller bolt dia.
• Side roller dia.• Bolt dia.• Bolt length
40 mm16 mm 8 mm
26 mm 8 mm11 mm
Size II
58 mm22 mm10 mm
40 mm10 mm22 mm
Size IATTENTION:When ordering spare parts, always indica-te the size of the band saw guide. It can be determined using the diameter of the top or bottom back roller or side roller.!
10
11 13/14
15
12
22
Item-No.
Price/pcs.in €
Item-No.
Price/pcs.in €
Spare parts for band saw guides APA type 2Lower guide
Item
101112131415
Designation
Side roller, complete*Back roller, complete**Locking capCarry bolt 16 x 120 mm***Carry bolt 22 x 120 mm***Locking plug
Pcs.
211112
Size I
1290105210971146
1265
Size II
129110531099
12701265
Spare parts for band saw guides APA type 2 Lower guide
68.2067.50
3.6017.40
1.50
73.1075.105.00
16.901.50
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
All prices plus VAT, plus freight.
Art.-Nr. Preis/St.in €
1 2 3 6/7
4
4
5
ATTENTION:When ordering spare parts, always indicate the size of the band saw guide. It can be deter-mined using the diameter of the top or bottom back roller or side roller.Basic body painted green.
!
* With bearing sleeve and locking plug** With bearing sleeve and locking cap*** Also available in other lengths
Spare parts for ball bearing back rollers
Weightapprox.0.40 kg0.50 kg0.90 kg0.40 kg
0.40 kg0.50 kg0.90 kg0.40 kg
0.05 kg0.08 kg0.16 kg
Ball bearing back roller K/2 topmaintenance free
APA 2 top
Ball bearing back roller K/3 bottom, maintenance free
APA 2 bottom
Spare running tread K/1 with screws
Versions Size
IIIIVVIII
IIIIVVIII
IIIIVVI
K/3K/2
Spare parts for band saw guides APA 1055 (not for APA 2)
Technical data
Size of the band saw guideBack roller dia. in mmBack roller bearing dia. in mmBack roller bolt dia. in mmSide roller dia. in mmSide bearing sleeve dia. in mmSide roller bolt dia.
02816 8 22 22 8
Item
1234
5
67
Designation
Top back roller*Bottom back roller*Side roller**Locking cap, top and bottomLateral locking screw, incl. locking plug
Tommy screw, longTommy screw, short
0 I II III IV VI Size of band saw guide
* with bearing sleeve and locking cap** with bearing sleeve and locking screw, incl. locking plug
23
I 35 16 8 26 16 8
II 4016 83516 8
III 582210402210
IV 652412482410
VI 783014652812
K/1
1168116911701168
1171117211731171
117411751176
206.90 193.20 230.20 200.90
154.20 189.00 227.00 154.20
45.40 57.50 69.70
Item-No.
1045 1051 1065 1097
1091
1181 1182
Item-No.
1046 1052 1066 1097
1091
1181 1182
Item-No.
1047 1053 1067 1099
1093
1181 1182
Item-No.
1048 1054 1068 1100
1094
1181 1182
Item-No.
1049 1055 1069 1101
1095
1181 1182
Price/pcs.in €
Price/pcs.in €
Price/pcs.in €
Price/pcs.in €
Price/pcs.in €
48.1050.8059.70 3.60
7.50
3.60 3.60
63.3067.5048.10 3.60
7.50
3.60 3.60
69.8075.1082.20 5.00
11.80
3.60 3.60
107.10 85.70 84.40 8.00
12.90
3.60 3.60
121.10126.40107.70 16.00 17.40
3.60 3.60
K/1
Item-No.
1044 -- 1064 --
--
-- --
64.80--66.00--
--
----
Price/pcs.in €
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
All prices plus VAT, plus freight.
Item-No.
Price/pcs.in €
Suitable for cutting NE metals and diffi cult to chip wood materials
Back roller GL 456 Bolt dia. 20 mm, rollers 35 mmapplicable top and bottom
Side roller GL 456 with bearing supportapplicable top and bottom
Back roller GL 789 Bolt dia. 20 mm, rollers 50 mmapplicable top and bottom
Side roller GL 789 with bearing supportapplicable top and bottom
Back roller GL 910 Bolt dia. 30 mm, rollers 70 mmapplicable top and bottom
Side roller GL 910 with bearing supportapplicable top and bottom
Sicherheits-Anschlagplatten-Set 208
1306
1307
1308
1309
1310
1311
24
Back rollers
20
Side rollers
20
30
35 5070
35
50
70
Precision guide for band saw machines.
Standard design matching any band saw• Hardened back and side rollers fasten the saw blade in the correct position.• Operator-friendly fi ne adjustment, serial permanent lubrication, minimum maintenance• Stable construction, smooth and wear-free saw blade guide• Long service life of the bandsaw blade• Fixing elements included in delivery
Band saw guide GL
Spare parts
for band saw guide GL
136.00
132.40
139.60
136.00
461.40
32,50
59,00
38,90
62,80
94,10
128,80
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
1300
1301
1302
1303
1304
Netweight 1.1 kg
1.0 kg
2.1 kg
1.9 kg
5.1 kg
Version 456 topfor wheel dia. 400/500/600 mm and blade widths 3 - 25 mm
Version 456 bottomfor wheel dia. 400/500/600 mm and blade widths 3 - 25 mm
Version 789 topfor wheel dia. 700/800 mm andblade widths 5 - 40 mm
Version 789 bottomfor wheel dia. 700/800 mm andblade widths 5 - 40 mm
Version 910 topfor wheel dia. 900/1050 mm andblade widths 5 - 40 mm
Lower bandsaw guide for version 910 kindly use „Version 789 bottom“, item no. 1303
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
Rubber cork bandages 1011
To cover the band saw wheels, simple repair work of running linings, ensures calm running and a clean cutting image and extends the service life of the band saw blade.
3600.20
3600.25
3600.30
3600.35
3600.40
3600.45
3600.50
3600.55
3600.60
3600.65
3600.70
3600.80
Width
20 mm
25 mm
30 mm
35 mm
40 mm
45 mm
50 mm
55 mm
60 mm
65 mm
70 mm
80 mm
Delivery by the meter
Recommended accessory:
25
Super glue 1014
For gluing of rubber cork bandages on bandsaw wheels.1 can = approx. 650 g, suffi cient for 3 bandages up to 800 mm dia.
3213
On request we deliver customized rubber cork bandages in the appropriate length for your band saw (please indicate wheel diameter).
For cutting-to-size we calculate a surcharge of 5.- Euro.
6.80
6.90
8.00
11.60
11.70
12.90
15.00
16.40
18.00
20.40
22.40
28.30
29.10
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
3057305830593060
26
1351
1350
1209
Fixing rails
Universal base element for attachment of safety and working equipment
330 mm long430 mm long530 mm long830 mm long
Table extension for band saw table
To attach to the attachment rail of the table.Replaces a helper when processing long workpieces.
- Table of anodised aluminium. Length 1100 mm, width 172 mm.- Folding supporting base.- Without attachment rail.
CirQuick
Practical assistance to sawing round workpieces.
Enables precise sawing of arches and discs without scribing.
CirQuick is simply mounted to the table extension item no. 1351.
A second table extension is recommended for workpieces with large diameters.
without attachment rail
Additional protection cover
for band saw guides
The two-part, transparent protective coverd is adjustable in height and swing away for changing the saw band.As an additional supplement to the standard protective device for optimum safety between table top andband saw guide. 712.70
165.70
87.70
14.4015.3016.7023.30
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
27
Table insert for machine table
MDF inlay board
is placed in the chip channel below the lower band saw guide, preventing wood chips from getting between the band saw and the band saw blade.
For band saw wheel diameter Dimensions400 mm 105 x 60 mm 500 mm 96 x 60 mm 600 mm 96 x 60 mm 700 mm 96 x 60 mm 800 mm 105 x 60 mm 900 mm 140 x 60 mm
0005.07100005.07110005.07110005.07110005.0710 0005.0712
reduces the table opening to a minimum, including stud bolts.Due to dimensional tolerances of cast iron machine tablesthe table inserts have to be fi tted on site.
For band saw wheel diameter Dimensions400 mm 83 x 83 mm 500 mm 85 x 65 mm 600 mm 85 x 65 mm 700 mm 85 x 65 mm 800 mm 100 x 80 mm 900 mm 100 x 80 mm
0345.51020345.51030345.51030345.51030345.51040345.5104
7.307.107.107.107.307.50
15.2016.6016.6016.6017.4017.40
Wooden sliding stick 2391
with fi xing magnets. For secure guidance of narrow workpieces at table and format circular saws. Reduces danger of accidents.
Packaging unit: 10 pieces3418 125.70
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
28
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
29
CIRCULAR SAWS
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
Circular saw feeder 76
2078 Attachment on the circular saw fence
Technical data
4101
4102
6209.0048
2067
Net-weight 0.1 kg
0.3 kg
Accessories
Designation
Infeed roller 110x20 mm (center roll)
Infeed roller 110x50 mm (front and rear roll)
Adapter rail for Altendorf format circular saws
Adapter rail for attachment height 30-40 mm and clamp plate at the stop, 30-50 mm
Can be used for table and format circular saws of different makes, for secure cutting of strips, plants, window scalings, etc. of massive wood, with adjustable intake profi le and 3 infeed rollers, 2 infeed speeds, fast setting to tool height via handwheel, with extraction connection for dust-free work, incl. plug, with rail for attachment height of 18 – 40 mm and clamp plate at the stop of 20 – 30 mm, with integrated electr. safety magnet system as tilt protection. Simple and fast (tool-less) assembly/disassembly at the rip fence instead of the aluminum profi le, best view to the workpiece by transparent pivoting protection, ergonomic work when cutting strips.Voltage 400V /50 Hz
30
3,674.00
53.80
77.60
47.00
62.80
PRO TECT
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
• Drive rollers• Roller dia.• Roller thickness front• Roller thickness center• Roller thickness, rear• Axle distance
3 pcs.110 mm50 mm20 mm50 mm200 mm
• Infeed speed• Drive• Max. workpiece height• Min. workpiece length• Extraction nozzle• Net weight
13 + 26 m/min0.14 kW80 mm200 mm80 mmapprox. 30 kg
Information and videoswww.hokubema-panhans.de
or
Double-sided mitre-fence DSG
PANHANS 680 incl. adapterPANHANS 690, V 91 incl. adapterAltendorf F 45, WA 8, WA 80 incl. adapterHolzher Superslide 1245, 1290 incl. adapterHolzkraft formal S incl. adapterHolzkraft SC 4 elite, SI 400 elite S, ST 5 incl. adapterMartin T 60, T 65, T 70, T 75 PREX, TC 660 incl. adapterRobland E 2500, Z 3200, NZ 3200, NZ-Axis Ergo, PS-3200, PS-3200 X 1, PS 3200 X 3 incl. adapterSCM Si-class-Serie incl. adapterSCM Si-nova-Serie incl. adapterfurther models on request
Double-sided mitre-fence DSG-D Square digitally, length analogically adjustable
PANHANS 680 incl. adapterPANHANS 690, V 91 incl. adapterAltendorf F 45, WA 8, WA 80 incl. adapterHolzher Superslide 1245, 1290 incl. adapterHolzkraft formal S incl. adapterHolzkraft SC 4 elite, SI 400 elite S, ST 5 incl. adapterMartin T 60, T 65, T 70, T 75 PREX, TC 660 incl. adapterRobland E 2500, Z 3200, NZ 3200, NZ-Axis Ergo, PS-3200, PS-3200 X 1, PS 3200 X 3 incl. adapterSCM Si-class-Serie incl. adapterSCM Si-nova-Serie incl. adapterfurther models on request
Double-sided mitre-fence DSG-A Square and length can be set analogically.
5059438943865053505550575051
439743884387
5060439043955054505650585052
505043924393
The DSG solves all tasks quickly and smoothly when producing mitre cuts on narrow and short workpieces at any angle from 0° - 90°.New is a printed scale, which also makes the production of „false mitres“ easy.
Automatic length compensation for preferred angles 5/10/15/22.5/30/45/60/67.5°. For cutting to length of up to 1,375 mm. Easy handling and quick installation on the trolley of the saw. With splinter proof and practical wall holder.
31
1,293.301,293.301,293.301,293.301,293.301,293.301,293.30
1,293.301,293.301,293.30
1,963.701,963.701,963.701,963.701,963.701,963.701,963.70
1,963.701,963.701,963.70
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
2082
2056
2080
SIMPLY work piece holder
For secure and clean lengthwise cutting of narrow parts. With spring-mounted roll, dia. 80 mm. Simple mounting at the alu-minum profi le of the rip fence via star handles. Roller height-adjustable for individual adjustment to the work piece thickness. The work piece holder SIMPLY should be used in pairs.
Circular saw protective device 1773F
For easy mounting on present circular saw machines
a
c
ATTENTION:According to the machinery directive, a saw blade diameter above 315 mm requires a protective device independent of the riving knife.!
b (mm) best
Dimensions
Size 1Size 2
a (mm)min. max.
95 640 120 450 - 850355 940 195 900 - 1250
c (mm) Cutting width
32
189.00
b
941.70
981.90
PRO TECT
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
Size 1
For small circular saws comprising:Hood carrier, U-attachment adjus-table from 450 to 850 mm cutting width, with narrow protecting cover and transparent cover, for circular saw blades up to 300 mm dia. and extraction nozzle 80 mm dia., incl. adapter.
Net weight
approx. 17.5 kg
Size 2
For format saws comprising:Hood carrier, U-attachment adjustable from 800 to 1250 mm cutting width, with narrow protec-ting cover and transparent cover, for circular saw blades up to 400 mm dia. and extraction nozzle 80 mm dia., incl. adapter.
Net weight
approx. 27.5 kg
Net weight
0.2 kg
0.2 kg
0.2 kg
3.9 kg6.6 kg
Designation
Insertable extraction nozzle 80 mm dia. matching narrow and wide protecting cover
Inlet roller for cover, complete dia. 400 mm
Inlet roller for cover,complete dia. 300 mm
Parallelogram size 1 for type 1773/FParallelogram size 2 for type 1773/F
Front protective lid, transparent, for circu-lar saw blades up to dia. 300 mm
Front protective lid, transparent, for circu-lar saw blades up to dia. 400 mm
Gas pressure spring for parallelogram size I
Gas pressure spring for parallelogram size II
33
3
1 2
Net weightapprox.1.6 kg
2.3 kg
Version
For circular saw blades up to 300 mm dia.
For circular saw blades up to 400 mm dia.
Net weightapprox.2.1 kg
3.5 kg
Version
For circular saw blades up to 300 mm dia.
For circular saw blades up to 400 mm dia.
Accessories
Protect. cover, narrow, with attachment rail
for circular saws with fi xed blade
Protect. cover, narrow, with attachment rail
for circular saws with tilting blade
Protective cover with extraction connection 1794
Net weightapprox.0.25 kg0.25 kg0.4 kg
Version
Up to 250 mm dia. for hose 25 mm dia.Up to 250 mm dia. for hose 38 mm dia.Up to 315 mm dia. for hose 38 mm dia.
For attachment to the riving knife
2064
2065
2026
2028
2081
2021
2020
20582070
2034
2031
0345.0209
0345.0208
337433753376
133.10
143.60
144.60
155.20
44.70
29.10
28.30
286.10620.80
61.00
61.00
135.10
121.40
30.5028.6052.20
PRO TECT
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
34
3330
3390
3365
2009
3301
3813
Sliding handle 2390
To prevent accidents in circular saw, planing machines, etc. self-produced wood blocks may be individually shaped to match the work piece. Tips penetrating deeply into the wood ensure secure hold of the handle. Net weight: approx 0.6 kgPackaging unit. 5
Sliding stick 2391
For secure guidance of narrow workpieces at table and format circular saws. Reduces danger of accidents.Easily chipping plastic protects the circular saw blade.A must-have for every saw. Packaging unit 10 pcs. Net weight: approx. 1.1 kg
Safety-MaxFor secure guidance of work pieces to the right of the circular saw blade. Exact placement at the aluminum profi le of the circular saw stop means that the operator‘s hand is always outside of the danger area and danger of accidents is excluded in case of proper application.
Crosscut fence 617
For circular saws with swivel arm of aluminium profi le with extensi-ble extension, colour scales, visual enlargement for precise reading of scale, length stop extensible up to 2500 mm stop length, with 2 defl ected and movable stop catches.Net weight: approx. 8.2 kg
Protective cover with suction 1798
Net weightapprox.0.7 kg
Version
Up to 315 mm dia., for hose 60 mm dia.
For attachment to the riving knife
When ordering, please attach dimension sketch of the stop profi le.
Adapter for different stop profi les
37.30
443.40
79.40
101.50
157.30
0.00
PRO TECT
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Long-term lubrication cartridge
Pneumatic clamping device
Electronic key systemfor machine activation
detailed information s. page 42
detailed information s. page 42
det. information s. pages 39 - 41
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
35
Safety-Cut2-point support for break-off free sawing Clamp system for break-off free sawing with the crosscut fence.Individual auxiliary rods mounted with wood screws from behind or recessed-head screws from the front.
A 2-point support permits easy cutting of bent wood as well.
System comprising: 2 clamp units for alu profi les with a profi le width 40 - 100 mm and a profi le height of 82 mm and 1 splinter rod and 1 counter wood.
Safety-Cut plus
Safety-PowerSafety-Power for secure fastening of short and narrow work pieces at the stop, throughout the range of +45° to -45°.
Exact guidance through the groove at the roller carriage.Guide elements adjustable from 19-23 mm groove width.(Recommended in connection with Safety-Cut plus).
Front and rear saw aid Multi-CutFor secure separation, trimming, sawing according to tracing and vertical grooving of solid wood and panel material.The 3 clamp tips can be used to securely hold solid wood.The opposing rubber edges permit secure and damage-free fastening of work pieces up to approx 10 mm width.
Simple clamping in the T-groove of the sliding table by adjustable guide elements of 19-23 mm groove width. (Further widths on request)
This is a sensible accessory to complete every format circular saw!
Stop extension by 300 mm,for mounting on Safety-Cut (Item-No. 3366 - additionally required!), for cuts to 0 mm with 4 different mitre application surfaces (-45° / +45°, for use on both sides.Suitable for secure cutting of short work pieces.
Delivery: stop extension, mounting element, screws Splinter proofWorkpiece
Stop extension mounting element
3366
3367
3368
3364
249.20
123.50
136.20
230.20
PRO TECT
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
detailed information s. page 42
detailed information s. page 42
det. information s. pages 39 - 41
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
For saws of 100 - 250 mm dia.
Weight kg
0.100.15
0.050.080.100.10
DIN/version
D 38820D 38820
T 1772T 1772T 1772T 1772
Also suitable for covered cuts for secure separation of plates and solid wood.
Groove-width mm13.013.0
14.514.514.514.5
Thickness mm22.5
1.52.02.53.0
Weight kg
0.150.200.30
0.350.150.200.25
DIN/version
D 38820D 38820D 38820
T 1772T 1772T 1772T 1772
For saws of 250 - 350 mm dia.
Groove-width mm13.013.013.0
18.018.018.018.0
Thickness mm1.92.22.8
1.52.02.53.0
Weight kg
0.250.30
0.150.250.300.350.35
DIN/version
D 38820D 38820
T 1772T 1772T 1772T 1772T 1772
For saws of 350 - 450 mm dia.
Groove-width mm13.013.0
20.020.020.020.020.0
Thickness mm2.53.2
2.02.53.03.54.0
Weight kg
0.70
DIN/version
D 38820
For saws of 500 - 600 mm dia.
Groove width mm18.0
Thickness mm3.5
36
39
235
178
80
264
T 1772
12
142
D 38820228.5
56.5
285.5178
5.5
142
134
50
188
19
132
109
51.5
170
D 38820 T 1772
142
134
50
188
8
142
50
D 38820164
60
243166
20
164.5
140
60
224
T 1772
D 38820
13.0 14.5
13.0 18.0
13.0 20.0
12
228.5
170
59.5
265.5
18.0
33913392
3349335033513360
339733933394
3332335233533354
33953396
33333355335633573323
3341
40.9037.30
34.0038.7041.2046.20
35.4033.4042.20
36.7045.7052.2056.80
39.1044.10
44.5058.8063.0073.7077.70
66.40
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
Force-guided riving knives
according to DIN 38820 = D and model 1772 = T
PANHANS riving knivesaccording to model 1792
Weight kg
0.25 0.30
Version
T 1792T 1792
For saws from 100 - 250 mm dia.
With attachment means for extractable protecting cover type 1794/1798
Groove width mm14.514.5
Thickness mm1.21.5
Weight kg
0.25 0.300.150.25
Version
T 1792T 1792T 1792T 1792
For saws from 200 - 300 mm dia.
Groove width mm14.514.514.514.5
Thickness mm1.52.02.53.0
PANHANS riving knivesaccording to model 1797
Weight kg
0.30
Version
T 1797
For saws from 300 - 315 mm dia.
With attachment means for extractable protecting cover type 1794/1798
Groove width mm18
Thickness mm2.5
37
3334 3335
3336333732343239
3370
14.1
149
138
42.5
182.5
T 1792
18.8
202.5
185
53
235
T 1792
13
187
100
233
62
T 1797
14.5
14.5
18.0
29.9030.80
31.1033.5037.1041.20
47.40
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
Force-guided riving knives
according to DIN 38820 = D and model 1772 = T
Ergonomic work mats
made of PUR integral foam
Surface round pastilleFormat 950 x 650 x 13 cmWeight per mat: approx. 2.9 kgColour: RAL 7016 anthrazite
The perfect equipment for standing workstations.
• Scientifi cally proven ergonomic effectiveness: Reduction of body and joint load by 60% (according to expert opinion Ergonomics Institute Munich)
• Preventive against cramps and circulation problems
• Reduces fatigue in feet, legs, back through dynamic stimulation of the muscles
• Preventative against degenerative joint changes on feet, knees, spine, hips
• Reduced risk of tripping due to run-on slope
These benefi ts can help to reduce employee downtime and thus preserve the company‘s most important resource - employee health. 4690
Leveller
4813
This foot is the suitable adjustment for many requirements. A damping insert of nitrile rubber (NBR) makes the transmission of vibrations to fl oors and buildings diffi cult.
Leveling foot, consisting of threaded spindle M12 x 100 mm usable thread length, connected with plate Ø 100 mm and damper made of NBR.
Foot completely made of stainless steel.Load range up to 1,200 kg.Optionally available with side fi xing strap.
Set = 4 pieces
38
60.80
17.10
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
Electronic key systemfor machine access controlThe electronic key system is a simple and cost-effective solution for a reliable and safe machine access control which was previously realized via key switch.
3 variants offer a suitable system for every application.5 tags (RFID key, 1 x red and 4 x blue) are supplied with each TM series device.
- TM-100: Tags with authorization level 1 – 5- TM-200 and TM-300: 5 neutral tags (teach-in by reader unit)
TM-100 - 5 authorization levels
The TM-100 device offers 5 tags (1 administrator and 4 user levels for differently authorized employees) which can already cover a large number of typical machine releases.
Depending on the user level of the respective key (marked with a number from 1 to 5*) up to 5 user levels are possible. *User level 5 = full access (administrator)
• TM-100 tags selectively pre-confi gured with authorization level 1 - 5• 1 digital output (PNP, active high) for administrator access (e.g. as key switch alternative)• 4 digital outputs (PNP, active high) for further machine functions (optionally available)
- Power supply 10 … 28 VDC- Interface RS232 (for parametrization)- Data memory internal fl ash- Installation panel housing or built-on housing (aluminium)- Connections pluggable 12-pin screw terminal- Dimensions (panel housing) W x H x D = 72 x 48 x 82.5 mm resp. 2.83 x 1.89 x 3.25”- Panel cutout W x H = 67 x 46 mm resp. 2.64 x 1.81”- Installation depth 75.5 mm resp. 2.97” (without connectors) - Protection class front: IP65 / rear: IP30- Dimensions (built-on housing) W x H x D = 107 x 56 x 110 mm resp. 4.21 x 2.20 x 4.33”
4667
39
668,50
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
- Power supply 10 … 28 VDC- Interface RS232 (for parametrization)- Data memory SD card- Connections pluggable 12-pin screw terminal- Outputs 1 digital “Master” output (PNP, active high) and 4 digital “User Level” outputs (PNP, active high)- Installation panel housing or built-on housing (aluminium)- Dimensions (panel housing) W x H x D = 72 x 48 x 82.5 mm resp. 2.83 x 1.89 x 3.25”- Panel cutout W x H = 67 x 46 mm resp. 2.64 x 1.81”- Installation depth 75.5 mm resp. 2.97” (without connectors) - Protection class front: IP65 / rear: IP30- Dimensions (built-on housing) W x H x D = 107 x 56 x 110 mm resp. 4.21 x 2.20 x 4.33”
TM-200 - management of up to 100 tags
TM-200 allows reliable and secure machine access control at the highest level. The integrated database with CSV export function via the front-side SD card slot enables external processing of all stored data.
• Management of up to 100 tags (TM-100 tags can also be teached-in)• RTC real-time clock, data base and CSV export function for SD card included• 1 digital output (PNP, active high) for administrator access of tag number 5 (e.g. as key switch alternative)• 4 digital outputs (PNP, active high) for the tag numbers 1 - 4• Serial RS232 interface for parametrization• Built-in panel housing (optionally built-on housing for surface mounting)
4668
40
Tag Master TM-200 Elektronisches Schlüsselsystem für Maschinenfreischaltungen
Produktbeschreibung
Das elektronische Schlüsselsystem TM-200 er-möglicht eine zuverlässige und sichere Maschi-nen-Zugangskontrolle auf höchstem Niveau. Die integrierte Datenbank mit CSV-Exportfunktion über den frontseitigen SD-Kartenslot ermögli-chen die externe Weiterverarbeitung aller ge-speicherten Daten und Protokolle.
Das mit einer Real-Time-Clock ausgestattete Gerät ermöglicht Maschinenzugriffe über 100 Tags (Schlüssel für 1 Administrator- und 99 An-wenderebenen). Die Parametrierung erfolgt über die integrierte RS232-Schnittstelle, die mit unserer betriebssystemunabhängigen Bedien-oberfläche verbunden wird.
• Verwaltung von bis zu 100 Tags (1 Administrator- und 99 Anwenderebenen) • Inklusive RTC-Echtzeituhr, Datenbank und CSV-Exportfunktion für SD-Karte • 1 Relaisausgang für den Administratorzugang (z. B. als Schlüsselschalter) • 4 Relaisausgänge für weitere Maschinenfunktionen (als Option verfügbar) • Serielle RS232-Schnittstelle zur Parametrierung über OS-Software • LEDs für Status- und Fehlermeldungen (in Vorbereitung) • 4 integrierte Digitalausgänge für Steuerfunktionen • Optional weitere Digitalausgänge verfügbar • Schalttafeleinbaugehäuse (Aufbaugehäuse optional)
Spannungsversorgung: 10 … 30 VDC Schnittstelle: RS232 (zur Parametrierung)
Datenspeicher: SD-Karte Montage: Schalttafeleinbau
Abmessungen: B x H x T = 72 x 48 x 82,5 mm Schalttafelausschnitt: B x H = 67 x 46 mm
Einbautiefe: 75,5 mm ohne Anschlussstecker
Schutzart Frontseite: IP30*/ Rückseite: IP30
Anschlüsse: 12-pol. Schraubklemme, steckbar Ausgänge: 1 Relais (Schließer) und 4 Digitalausgänge (PNP, active high)
Technische Daten
Produkt Features
*) IP65 optional auf Anfrage
by
1,009.40
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
4669
41
Tag Master TM-300 Elektronisches High-End-Schlüsselsystem für Maschinenfreischaltungen
Produktbeschreibung
Das elektronische Schlüsselsystem TM-300 bietet High-End-Funktionen zur zuverlässigen und si-cheren Maschinen-Zugangskontrolle. Sämtliche gespeicherten Daten und Protokolle sind via Modbus TCP voll netzwerkfähig und lassen sich so problemlos weiterverarbeiten. Unsere klar strukturierte Anwendersoftware erlaubt zudem die direkte Kommunikation mit angebundenen Maschinensteuerungen inklusive Visualisierung der relevanten Maschinenparameter.
Das mit einer Real-Time-Clock ausgestattete Ge-rät ermöglicht Maschinenzugriffe über eine un-begrenzte Anzahl an Tags (inkl. 100 Master-Tags). Die Parametrierung erfolgt via Modbus TCP.
• Unbegrenzte Anzahl an Tags inkl. 100 Master-Tags (mehr auf Anfrage realisierbar) • Inklusive RTC-Echtzeituhr, Datenbank und Netzwerkanbindung via Modbus TCP • 1 Relaisausgang für den Administratorzugang (z. B. als Schlüsselschalter) • 4 Relaisausgänge für weitere Maschinenfunktionen (als Option verfügbar) • Modbus TCP zur Parametrierung und Anbindung an das Netzwerk • Zusätzliche serielle RS232-Schnittstelle zur Fehleranalyse • LEDs für Status- und Fehlermeldungen (in Vorbereitung) • 4 integrierte Digitalausgänge für Steuerfunktionen • Optional weitere Digitalausgänge verfügbar • Schalttafeleinbaugehäuse (Aufbaugehäuse optional)
Spannungsversorgung: 10 … 30 VDC
Schnittstelle: Modbus/TCP nach CPF15/1 Norm
Datenspeicher: Netzwerk-Datenbank Montage: Schalttafeleinbau
Abmessungen: B x H x T = 72 x 48 x 112 mm Schalttafelausschnitt: B x H = 67 x 46 mm
Einbautiefe: 109,5 mm ohne Anschlussstecker Schutzart Frontseite: IP65 / Rückseite: IP30
Anschlüsse: Versorgung: 3-pol. Schraubklemme, steckbar Netzwerkanschluss: rückseitige RJ45-Buchse
Ausgänge: 1 Relais (Schließer) und 4 Digitalausgänge (PNP, active high)
Technische Daten
Produkt Features
by
4670 4671
4672
TM-300 - unlimited number of tags
The electronic key system TM-300 offers high-end functions for reliable and secure machine access control. All stored data and protocols are fully network compatible via Modbus TCP and can consequently be processed without any problems. The clearly structured user software also allows direct communication with connected machine controls, including visualization of the relevant machine parameters.
• Unlimited number of tags available (TM-100 tags can also be teached-in)• Database and network connectivity via Modbus TCP• 1 digital output (PNP, active high) for administrator access (e.g. as key switch alternative)• 4 digital outputs (PNP, active high) for further machine functions (optionally available)• Modbus TCP for parametrization and connection to the network • Additional serial RS232 interface for error analysis• Built-in panel housing (optionally built-on housing for surface mounting)
- Power supply 10 … 28 VDC- Interface Modbus TCP according to the CP15/1 standard- Data memory network database- Installation panel housing or built-on housing (aluminium)- Connections power supply: pluggable 3-pin screw terminal network connection: RJ45 socket (rear)- Outputs 1 digital “Master” output (PNP, active high) for user levels- Dimensions (panel housing) W x H x D = 72 x 48 x 82.5 mm resp. 2.83 x 1.89 x 3.25”- Panel cutout W x H = 67 x 46 mm resp. 2.64 x 1.81”- Installation depth 75.5 mm resp. 2.97” (without connectors) - Protection class front: IP65 / rear: IP30- Dimensions (built-on housing) W x H x D = 107 x 56 x 110 mm resp. 4.21 x 2.20 x 4.33”
Extra tags “User” blue, 10 pieces
Extra tags “Master” red, 1 piece
Reader unit for TM-200 and TM-300, 1 piece
Accessories
1,328.70
123.60
25.80
199.50
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
42
Drill chuck for PANHANS long hole drilling machineThree-jaw clamping chuckClamping range 5 – 20 mm,Conical mount B24 shortened
Designation:Impact resistant key-type drill chuck with key.Conical threaded mount in acc. With DIN ISO 10887(toothing in acc. With DIN 6349) For clockwise and counterclockwise rotation.Industrial design with maximum precision.Customer benefi t:High concentricity up to 0,15 mmIncreased clamping force due to proven transmission principle by means of drill chuck key
Lubrication cartridge
Enables effective, long-term low-cost and low-maintenance lubrication.Provides lubrication point continuously and automatically, using fresh lubricant.Reduces the need for optimum lubricant supply.
Dispensing time - lasts approximately 12 months
Pneumatic clamping device
accessory set
Pneumatic clamping device
The pneumatic safety cylinder fi xes workpieces with a clamping force of 500 N – 1000 N.The stroke is 100 mm.
The clamping is carried out smoothly and safely, with fl exibility.Can be used on all milling machines, circular saws and other machines, on which workpieces can be fi xed.Air connection: 3 - 6 bars.Scope of delivery: clamping device with hand slide valve, pressure regulator
Required, if two pneumatic clamping devices are being operated at the same time.
Scope of delivery: clamping device, spiral hose
3363
3812
4814
200 100
0345.0606 65.80
622.90
802.40
368.70
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
ø 65
113.
5
ø 23.324
Clamping range 5 - 20 mm
M8
8
(B24 shortended)
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
43
LIFTING/ASSEMBLY TABLESWORKING AIDS
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
44
3271
3276
3800
Roller block STATIV
The practical working aid at all processing machines. Height adjustment is performed simply and smoothly by the centrally attached hand wheel.
With plastic carry rollerCarrying capacity 500 kgLength 700 mmHeight min/max. 760/1,030 mmRoller dia. 90 mm
With roller guide on all sidesCarrying capacity 500 kgLength 980 mmHeight min/max. 700/960 mm
Height adjustable working table HS 300
The stable working table can be adjusted in height via centrally positioned pedal - quick and easy.
Applicable as stack trolley, machine set-up trolley, ...
Carrying capacity 300 kgStroke 610 mmConstruction height 400 mmTotal height max. 1010 mmPlatform size 1,000 x 600 mmWeight 75 kg4 castors, two of them with brake
Height adjustable worktable
HS 300-midi with swivel devicefor quick and easy plate handling
The swivel device mounted instead of the platform enables the simple handling of large plates from the horizontal to the vertical position at processing machines.
The swivel device can easily be operated by one person.
Carrying capacity 300 kgStroke 610 mmConstruction height 400 mmTotal height max. 1,010Platform size 1,200 x 740 mmWeight 160 kg4 castors, two of them with brake
3801
626.00
730.00
1,225.00
3,130.00
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
The practical working aid at all processing machines. Height adjustment is performed simply and smoothly by the centrally attached hand wheel.
With plastic carry rollerCarrying capacity 500 kgLength 700 mmHeight min/max. 760/1030 mmRoller dia. 90 mm
With roller guide on all sidesCarrying capacity 500 kgLength 980 mmHeight min/max. 700/960 mm
The stable working table can be adjusted in height via centrally positioned pedal - quick and easy.
Applicable as stack trolley, machine set-up trolley, ...
Carrying capacity 300 kgStroke 610 mmConstruction height 400 mmTotal height max. 1010 mmPlatform size 1000 x 600 mmWeight 75 kg4 castors, two of them with brake
The swivel device mounted instead of the platform enables the simple handling of large plates from the horizontal to the vertical position at processing machines.
The swivel device can easily be operated by one person.
Carrying capacity 300 kgStroke 610 mmConstruction height 400 mmTotal height max. 1010Platform size 1200 x 740 mmWeight 160 kg4 castors, two of them with brake
Information and videoswww.hokubema-panhans.de
or
45
Height adjustable working table
HS 300-pluswith beech multiplex eylet boardFor accommodating various functional elements.The height is adjusted by means of a manual foot pump. The work-top size is particularly suitable for large workpieces. The model has 4 swivel castors, 2 of them with a locking brake.
Capacity 300 kgEffective stroke 610 mmHeight 430 mmOverall height 1,040 mmDimension of platform 2,000 x 1,000 mm
3802
Clampfor fi xing the work piece from the top
With locking bolt.
Adjustable up to 200 mm thickness of work piecerotatable 360 °
3808
Stopper roundStopper diameter 40/22 mm, 40 mm long, manufactured from POM plastic black.3810
Single screw clampClamping spigot with threaded spindle and pressure unit.
3809
Single shouldersWith locking bolt and safety plug.3811
2,418.00
69.00
18.00
Quick-release clamp with angular gearAdjustable stroke: 130 mmPanel size: 100 x 78 mm
With 2 locking bolts.3807 273.00
41.00
61.00
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
46
Working / assembly tableErgoPlan
The classic workbench, combined with the height-adjustable work-bench, form together to ensure an ergonomically optimized work-place and this opens new woodworking possibilities.The 120-mm thick bench has front and rear pliers, as well as holes on the table surface and on the front side.
ErgoPlan EP 1Working and assembly table, stationary with chassis and built-up workbench.Continuously height-adjustable, lifting and lowering using a foot-operated hydraulic lifting unit, stationary version with 4 foot plates, adjustable by +/- 15 mm for ground levelling, chassis with 4 steering rollers, wheel diameter 80 mm, including mechanical lifting device with central operating lever.
Including accessories: Workbench plate 1700 x 640 x 120 mm with 1 back vice and 1 front vice, holes on the front and top; rear bezel as protective cover; steel sheet shelf.
Workbench plate 1,700 x 640 x 120 mmCapacity 500 kgEffect. stroke 300 mmHeight 780 mmOverall height 1,080 mmPlatform dimension 1,700 x 640 mm
ErgoPlan EP 2
Work and assembly table, stationary with built-up workbench - without chassis.Continuously variable for heights, lifting and lowering using a foot-operated hydraulic lifting device, stationary version equipped with 4 foot plates, adjustable by +/- 15 mm for fl oor adjustment.
Including accessories: Workbench plate 1700 x 640 x 120 mm with 1 back vice und 1 front vice, holes on the front and top; rear bezel as protective cover, steel sheet inlays
Workbench plate 1,700 x 640 x 120 mmCapacity 500 kgEffect. stroke 300 mmHeight 780 mmOverall height 1,080 mmPlatform dimension 1,700 x 640 mm
ErgoPlan EP 3
Work and assembly table, stationary with built-up workbench - without chassis. Continuously variable for heights, lifting and lowering using a foot-operated hydraulic lifting device, stationary version equipped with 4 foot plates, adjustable by +/- 15 mm for fl oor adjustment.
Incl. accessories: rear bezel as protective cover, steel sheet inlays
3803
3804
3805
Capacity 500 kgEffect. stroke 300 mmHeight 780 mmOverall height 1,080 mmPlatform dimension 1,700 x 640 mm
4,319.00
3,702.00
2,259.00
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Item-No.
Price/pcs.in €
All prices plus VAT, plus freight.
49
Notes
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby
Ban
d sa
ws
Circ
ular
saw
sM
illi
ngPl
anin
gG
ener
alLi
ftin
g/As
sem
bly
tabl
es
Wor
king
Aid
s
ST 1
/201
9/en
g/m
P/1.
0
HOKUBEMAMaschinenbau GmbH
Anton-Günther-Straße 3 - 7D-72488 Sigmaringen
Phone +49 7571 755-0Fax +49 7571 755-222
Drilling • Sawing • Shaping • Planing • SI-TEC • Service
SI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECSI-TECby