1 94774 PP Industry-Produkte-Solutions En
Transcript of 1 94774 PP Industry-Produkte-Solutions En
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
1/40
PRODUCTS SOLUTIONS FOR THEINTERIOR ANDFURNITURE INDUSTRIES
INDUSTRY
www.egger.com
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
2/40
CONTENTS03 LIVING AND WORKING WITH WOOD
04 DESIGN AND INNOVATION06 CONSULTING AND SERVICE / LOGISTICS08 APPLICATIONS10 RAW CHIPBOARDS / THIN CHIPBOARDS12 MDF / HDF / OSB COMBILINE14 THIN MDF / THIN MDF LACQUERED16 LIGHTWEIGHT BOARDS18 MELAMINE FACED BOARDS20 LAMINATES / COMPACT LAMINATES22 WORKTOPS / FRONT ELEMENTS / WINDOW SILLS / LAMINATE BONDED BOARDS24 ACOUSTIC BOARDS28 FURNITURE COMPONENTS30 EDGING32 LOW FLAMMABILITY PRODUCTS34 DIGITAL PRINT
36 ENVIRONMENT AND SUSTAINABILITY38 PLANT OVERVIEW
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
3/40
LIVING AND WORKING WITH WOODTHEDESIGN REQUIREMENTS FOR RESIDENTIAL AND COMMERCIAL
SPACE ARE INCREASING. THE FOCUS IS NOT ONLY ONFUNCTIONAL FURNITURE BUT ALSO ONAESTHETICS THAT REFLECT THE CURRENTTRENDS. YOU CAN MEET THESE CHALLENGES WITH OURINDIVIDUALSOLUTIONS.
Our objective is to offer ourcustomerscomprehensive supportin thedevelopment of their products. In doing so, we relyon trend conforming decors and surfaces, which we presentevery year in our industry collection; but also oninnovative,
environmentally friendly wood-based materials, which we willpresent on an annual basis in this newINDUSTRY PRODUCTBROCHURE. With the combination of both, you receive anexcellent overview of our comprehensive, integrated range ofproducts and service.
We place special emphasis on working closely with ourcustomers in orderto meet their individual needs. Our focusis on design, functionality and advice. Our values as anindependent family company form the foundation for ongoingfurther development.Quality, respect and progress form thebasis for working successfully with our partners.
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
4/40
_ DESIGN & INNOVATION
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
5/40
DESIGN & INNOVATION
QUALITY
DESIGN AND INNOVATION ARE VERY IMPORTANT TO US.We constantly explore how we can further develop our wood-basedmaterials, be it in design, in their application characteristics or byfollowingcompletely new paths. In doing so, we have observed thatthe life cycle of trends keeps getting shorter. We are experiencingresponses to new trends at aspeed we have never seen before.With our decors and surfaces as well as our innovative products,we help you keep pace.
Our team constantly monitors various trendsaround the world that have an impact on the furniture industry. This results in new decorsand products that are in accordance with global
tastes but also meet regional needs.
FOR US, QUALITY HAS MANY FACETS.It begins with the careful selection of our raw materialsthrough to the production ofhigh-quality wood-basedmaterials in highly modern plants with the latest technology,to cooperation based on partnershipwith our customers.
_ DESIGN & INNOVATION
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
6/40
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
7/40
CONSULTING & SERVICE
LOGISTICS
No matter what, personal contact is alwayscrucial and is assured at all times by our salesrepresentatives and EGGER employees inour plants. We offer numerous services to ourcustomers in order to facilitate cooperation.
MAINTAINING PERSONAL CUSTOMER RELATIONSHIPSTHROUGH OUR TEAM IS ESSENTIAL TO US.
Our consulting services focus on creating additionalbenefits. We offer numerous services to our customers inorder tofacilitate cooperation.In addition to theeveryday personal dedication of ourEGGER team, various electronic tools support all processesfrom planning to delivery.
OUR GOODS REACH YOU WHEN YOU NEED THEM.We are a reliable,on-time supplier . We count onenvironmentallyfriendly transportation by working in close proximity to our
customers and raw materials in addition to using all availablemeans of transportation from trucks to trains and ships.
ouron.
_ CONSULTING & SERVICE
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
8/40
_ APPLICATIONS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
9/40
APPLICATIONS
OUR SOLUTIONS ARE SUITABLE FOR ALL AREAS OF APPLICATION IN THE FURNITUREINDUSTRY AND INTERIOR DESIGNFrom the offi ce to the living room, from the kitchen to thebathroom as a full-range supplier, we offer the right solutionfor all interior design situations from ooring to doors.
Our products are found in all residentialand commercial applications. They canalso be used to meet special requirements whether its low flammability boards,thick or thin worktops, effective acousticproperties or lightweight solutions.
Combination with system is our motto.We offer a harmonised range of coordinateddecors and surfaces in a variety of differentcoreboards and accessories for allapplications. Such exibility offers youa world of design possibilities at yourngertips.
_ APPLICATIONS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
10/40
BOARD TYPE AREA OF APPLICATION PROPERTIES THICKNESS PLANT*
EUROSPAN E STLCEin accordance withEN
Dry conditions (Furniture andinterior ttings)
Lightweight Rawboards mm, mm
SJO
EUROSPAN E P CEin accordance withEN
Dry conditions (Furniture andinterior ttings)
High level of stability from three layerconstruction; excellent coating properties
mmup to mm
BAR, HEX,RIO, RAM,BRI, URB,SJO, RAU,SHU, GAG
EUROSPAN E P CEin accordance withEN
Humid conditions (Bathroomand sanitary furniture, worktops,window sills)
Low swelling levels, moisture resistantresin used
mmup to mm
HEX, RIO,RAM,URB, SJO,SHU
EUROSPAN E P CEin accordance withEN
Dry conditions, load bearing(Walls, ceilings, ooring)
Excellent bending strength, with valuesthat make it suitable for static uses
Onrequest
RIO, RAM
EUROSPAN E P CEin accordance withEN
Humid conditions, load bearing(Bathroom and sanitary furniture,shelves, ooring)
Excellent bending strength, with valuesthat make it suitable for static uses. Lowswelling levels, moisture resistant resinused
mmup to mm
HEX ,RIO,RAM,URB
EUROSPAN Flammex E P B/B /M CE
Interior design, wall cladding andpartition walls as well as doors,xtures and furniture, e.g. inpublic spaces
Low ammability, certied according to EN- in re protection class EUROCLASS
B, according to DIN - in B and reprotection class M according to NF P-
mmup to mm
RAM, RIO,SJO
EUROSPAN JP F . (F****)
Furniture and interior ttings for dryconditions
Special board with signicantly reducedformaldehyde content, certied accordingto Japanese JIS standard
mmup to mm
HEX, URB,RAU
EUROSPAN E EPF-S CARB P CE
Furniture and interior ttingswith a higher requirement for lowformaldehyde content
In accordance with E , EPF, CARB Phase, IKEA IOS-MAT- and Blauer Engel(RAL ZU )
mmup to mm
HEX, RIO,RAM,BRI, URB,SJO, RAU,SHU, GAG
* Plant Overview on page 39
Smooth and at surfaceLight wood appearanceHigh density core materialHigh internal bondExtremely low sand content(longer tool life)Can be processed cleanly withoutchipping
STANDARD SHEET SIZES [mm]:5610 2070 and 2800 2070
CHARACTERISTICS
RAWBOARDSEUROSPAN Rawboards are aclassic coreboard material that offers a variety of applicationpossibilities in all areas of the furniture industry. They have astable core and ne surface layers.This three layer composition ensures that the panels are perfectly prepared for a variety ofdecorative coatings.
_ EUROSPAN
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
11/40
BOARD TYPE AREA OF APPLICATION PROPERTIES THICKNESS PLANT*
Thin chipboardE P CE
In dry conditions: door decks,surface layers for lightweight boards,for upgrading with laminates,
PVC or nish lm
Light and smooth surface; suitable for covering, coating andlacquering, low sand content, available sanded and unsanded
. mm up to< mm
WOE,SHU
Thin chipboardE RAL P CE
Dry conditions: Internal door blanks Suitable for reaching RAL RG- certication for interiordoors
mm up to. mm
WOE
Thin chipboardE ASY P CE
Dry conditions: Wood-core plywoodproduction (blockboard decks)
Special chip conguration for one-sided sanding . mm up to< mm
WOE
Thin chipboard EDS P CE
Dry conditions: Decks for sandwichelements (door blanks, core boards forlight weight furniture)
Board made of % surface layer chips for use as a doorblank. Finest surface ideal for the application of coatings
. mm up to mm
WOE
Thin chipboard EDS-ASY P CE
For the fabrication of coreboards andcoreboard surface layers
One-sided, asymmetrically constructed board made of %surface layer chips for sanding up to > . mm ( . )
. mm up to mm
WOE
Thin chipboard
JP F , (F****)
Furniture and interior ttings for the
Japanese market
Minimised formaldehyde content, certied in accordance
with Japanese JIS standard
. mm up to
< mm
WOE
Thin chipboardE EPF-S CARBP CE
Furniture and interior ttings with ahigher requirement for low formaldehydecontent
In accordance with E : EPF, CARB Phase and IKEAIOS-MAT-
. mm up to< mm
WOE,SHU
Thin chipboardE P FIN
Dry conditions: Backings, drawerbottoms, door blanks, dividing walls,panelling, caravan construction
Foils can be applied on one and two sides, standarddecors available
. mm up to< mm
WOE
Thin chipboardE P LAM
Dry conditions: panelling, door blanks Laminate surface, colour matched with EGGER EURODEKOR.Special door laminate collection available
. mm up to< mm
WOE
Thin chipboard EBESCH P CE
Dry conditions Base board for lamination of all types . mm up to mm
WOE
Thin chipboard E
P CE
Humid conditions Outstanding bending strength, tests conrmed by the
building authorities, low swelling behaviour, moisture-resistant bonding.
. mm up to
mm
WOE
Thin chipboard EP B / B / CE
Humid conditions and ame retardant Flame retardant approved building board for load-bearingapplications
mm up to mm
WOE
* Plant Overview on page 39
Excellent resistance to scratching,abrasion and chemicalsBright, high density board with lowbark content
CHARACTERISTICS
THIN CHIPBOARDSEGGER Thin chipboards areextra thin chipboards able to laminate perfect for using with foils,lms or lacquers. They are suitable for the construction of door blanks and lightweight boards.The coated boards offer asmooth, at surface, which provides excellent resistance toscratching, abrasion and chemicals.
_ THIN CHIPBOARDS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
12/40
BOARD TYPE AREA OF APPLICATION PROPERTIES THICKNESS PLANT*
MDF-ST E CEin accordancewith EN
Dry conditions: Furnitureand interior ttings
Perfect surface quality up to ; mm
up to mm
RIO,RAM,BRI,SJO,WIS
MDF-MB E CEin accordancewith EN
Dry conditions: Especiallydeveloped for themanufacture for PVC foilwrapped doors
Extra ne surface, high edge stability up to mm
BRI
MDF MBP-LE CEin accordancewith EN
Dry conditions: Powdercoated furniture
Optimised density for powder coating, goodelectrical conductivity.
; ; ; mm
BRI
MDF E EPF-SCARB CEin accordancewith EN
Dry conditions: Furnitureand interior ttings with ahigher requirement for lowformaldehyde content
In accordance with E ; EPF-S, CARB Phase and IKEAIOS-MAT-
up to mm
BRI
* Plant Overview on page 39
CUT TO SIZE
High capacity and state-of-the-art saws offer a cut-to-size service, whichis available in the following plants: SJO, URB, BRI, RIO, RAM, HEX, SHU, RAU.
Optimum densityExcellent physical propertiesEven bre structurePerfect surface quality
High load-bearing strengthMinimised swelling level
STANDARD SHEET SIZES [mm]:5610 2070 and 2800 2070
CHARACTERISTICS
MDF BOARDSMedium Density Fibreboards from EGGER are perfectly suited for furniture construction andinterior ttings. The boards aresanded on both sides and provide an excellent surface forlaminating and lacquering. In comparison to many other wood based materials, MDF has ahigher bending strength, a higher perpendicular tensile strength and better screw holdingproperties.
_ FIBREBOARDS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
13/40
BOARD TYPE AREA OF APPLICATION PROPERTIES THICKNESS PLANT*
HDF-KT Basic quality for laminateooring production
High density core for a stable tongue and groove prole, lowswelling level
. up to
. mmBRI,WIS
* Plant Overview on page 39
OSB core for high bending strengthPerfect coating and covering
abilities from Thin MDF top-layer Surface can be milledStrong hold of xtures and ttings
STANDARD SHEET SIZES [mm]:2800 2070STANDARD THICKNESSES [mm]:19; 22; 25
CHARACTERISTICS
OSB MDF COMPOSITE BOARDS
OSB COMBILINEEGGER OSB Combiline is a heavy-duty load-bearing composite board withan OSB core layer sandwiched between two layers of thin MDF. The product
advantages include optimised cutting, a high bending strength and strongscrew holding capabilities. Therefore the board is mainly used for furniturecomponents which require a high bending resistance.
EGGER OSB COMBILINE combines the perfect coating abilities of EGGER Thin MDFwith theexcellent bending strength of EUROSTRAND OSB.
High density core layer for stabletongue and groove proleResistant to pressure and robustExcellent processing propertiesLow swelling levels
CHARACTERISTICS
HDF BOARDSEGGER HDF boards (high density breboard) are oursubstrate for laminate ooring.They meet all requirements in terms of strength and dimensional stability.
_ FIBREBOARDS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
14/40
CUT TO SIZE THIN MDF + MDF LACQUERED
Fixed cut-to-size specications are produced on twohorizontal panel dividing saws, specically designedfor thin board material.
SHEET SIZES AND THICKNESSES LENGTH WIDTH
Minimum mm mm
Maximum mm mm
SHEET SIZES AND THICKNESSES
Minimum book height . mm
Maximum book height mm
Tolerance (per meter) +/- mm
BOARD TYPE AREA OF APPLICATION PROPERTIES THICKNESS PLANT*
Thin-MDF E Furniture back panels, foldableelements, drawer bottoms, door
blanks
Light surface colour; suitable for any kindof coating and covering; bendable
. ; . ; . ;
. ; . mmMAR
Thin-MDF EHD CE
Substrate for veneered or foiledfurniture components
High density, can be lacquered, bendable,very high elasticity module values
. bis mm WOE
Thin-MDF EEPF-S CARB
Rear panels on furniture, foldingelements, draws and door blanks
Meets the requirements according to E ,EPF-S, CARB Phase and IKEA IOS-MAT
. ; . ; . ;
. ; . mmMAR
* Plant Overview on page 39
Available either unsanded orsanded on one or both sidesFlexible and malleable, D andD moulded components can beproducedSuitable for a variety of surfacenishes: lacquer, electron beamcured varnish, nish foil, laminate,veneer
STANDARD SHEET SIZES [mm]:5610 2090 and 2800 2090
CHARACTERISTICS
THIN MDF BOARDSEGGER Thin MDF boards are extra thin, medium density breboards which are mainly usedfor furniture construction, due to their even surface of fine fibres. Awide variety of surfacenishes ensure that this product has a broad range of application areas.
_ FIBREBOARDS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
15/40
SHEET SIZES AND THICKNESSES LENGTH WIDTH THICKNESS
Minimum mm mm . mm
Maximum mm mm . mm
A choice of over 100 decorsCan be lacquered on one orboth sidesProcessing options: drilling,perforating, millingPatented folding technologyPrecise and exact furtherprocessing
CHARACTERISTICS
THIN MDF LACQUERED BOARDSEGGER Thin MDF lacquered boards arecoated with a water based lacquer either on oneor both sides.
LACQUERINGOn an electronically controlled high-capacity lacqueringline, large sheets of MDF are continuously passed througha cylinder based coating process. The applied lacquerscorrespond to the latest technological developments.
A standard range of more than 100 decors allows variousdesign options.
FOLDINGThe boards can now be folded thanks to a specialisedfolding machine, which creates a virtually seamless foldwith PU gluing using EGGERs patented technology.
PROCESSING OPTIONS:DRILLING: Almost any drilling format is possible inaccordance with customer requirements. Quotations aresubmitted following technical clarication.
CNC DRILLING / ROUTERING:With this process, line drillingsin the popular 32 mm grid pattern are also available, as arerouter cuts with a diameter in excess of 20 mm. Quotationsare submitted following technical clarication.
NOTCHING: Almost any types of notches are possible inaccordance with customer requirements. Quotations aresubmitted following technical clarication.
BEVEL CUTS:Bevel cuts can be carried out to precisedimensions. Quotations are submitted following technicalclarication.
PERFORATIONS:For specic requirements, lines of holescan be punched into the lacquered boards. Examples:acoustic applications, point of sale designs. Quotations aresubmitted following technical clarication.
_ FIBREBOARDS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
16/40
BOARD TYPE AREA OF APPLICATION PROPERTIES THICKNESS PLANT*
EUROLIGHT Raw
Postforming ele-ments, furniture anddoor ttings
Minimised weight withhigh stability, a variety ofsurface layer options
mm upto mm
BRI, SJO,HEX
EUROLIGHT Decor
Furniture and doorconstruction, interiorttings, shelving
Minimised weight withhigh stability, colourcoordination withEURODEKOR MFC
decors with mmsurface layer in stock
mmup to
mm
and mm
BRI, SJO,HEX
EUROLIGHT Painting grade
Furniture construction,interior ttings,shelving
No ller or primer needed,all established lacquers canbe used
mmup to
mm
BRI, SJO,HEX
EUROLIGHT LAM
Worktops, tables,counter tops
Laminate bonded light-weight constructions with ahigh surface resistance
mmup to
mm
BRI, SJO,HEX
EUROLIGHT FIN
Furniture construction,and interior ttings
Standard range with over decorative foils
mmup to
mm
BRI, SJO,HEX
EUROLIGHT Cut to size withframe
Postforming elements,furniture and doorconstruction, interiorttings
Excellent edge processingand screw holdingproperties
mmup to
mm
BRI, SJO,HEX
* Plant Overview on page 39
EUROLIGHT RAWEUROLIGHT Lightweight boards comewith thin chipboard surface layers asstandard. EGGER Thin MDF or EGGER ThinMDF HD surface layers are also availableupon request.
EUROLIGHT DECOR
EUROLIGHT Lightweight Boards areavailable with high quality EURODEKOR MFC surface layers (minimum thickness 3 mm). Colour matched laminates andedges are also available.
CUT TO SIZE
High capacity and state-of-the-art sawsoffer a cut-to-size service, which isavailable in the following plants: SJO,
URB, BRI, RIO, RAM, HEX, SHU, RAU.
Low weightHigh level of stabilityInnovative in design andconstructionEGGER colour matched edgingand surfaces
SURFACE LAYER BOARD OPTIONS:EUROSPAN Rawboards, EGGER ThinChipboards, EGGER Thin MDF, EGGERThin MDF HDDIMENSIONS:STANDARD SHEET SIZES [mm]:5610 2070 or 2800 2070STANDARD THICKNESSES [mm]:38; 50; 60Additional dimensions andthicknesses by request.
CHARACTERISTICS
EUROLIGHT lightweight boards consist of a stable, recycled honeycomb core. EGGER is the firsmanufacturer to offer a selection of universal, lightweight building materials with amelamine resin surface for interior design applications.
LIGHTWEIGHT BOARDS
_ EUROLIGHT
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
17/40
POSSIBLE PRODUCTION SIZES WITH FRAME
Minimum size mm
Maximum size -sided longitudinal frame mm
Maximum size -sided frame mm
FRAME MATERIAL
EUROSPAN Rawboard
EGGER MDF on request
EUROSTRAND OSB on request
EUROLIGHT Worktop
mm FRAMEBoard with 10 mm frame with xed
dimensions; suitable for stabilizing alltypes of edging
mm FRAMEBoard with 38 mm frame with
xed dimensions; a strong framefor Postforming/Softforming
mm FRAMEBoard with 65 mm frame with xed
dimensions; the solution for all ttingapplications
OPTIMUM STABILITYOptimum bending strength and high stability as ajoining element
DESIGN FREEDOMNew dimension and format freedom with EGGERdecor match
ERGONOMICS Lightweight building for mobile furniture that istruly easy to handle
THE SIX SUCCESS FACTORS OF EUROLIGHT
FUNCTIONAL APPLICATIONSIdeal for use in:- Kitchens, living room and bedroom furniture- Office furniture- Exhibition stands, shop tting and interior design
OPTIMAL LOGISTICSEfficient use of transport volume, easy handling and straight-forward installation
SAVES RESOURCESPositive energy balance in manufacturing and the efficientuse of raw materials.
EUROSPAN Frame
EUROSPAN 8 mm surface layer
Cardboard honeycomb core
EGGER ABS Edging
Postforming model /
_ EUROLIGHT
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
18/40
IMAGE TEXTURE CHARACTERISTICS APPLICATION SJO URB BRI RIO RAM HEX RAU SHU GAG
SMSemi matt
Smooth, medium glosslevel
Uni decors, preferably white
STDiamant
Grainy structure, mediumgloss level
Uni decors, metallic colours
STForest
Striped, glossy wood poreeffect
Uni decors, woodgrains
STPerfectmatt
Fine, very matt surface Woodgrains and also someuni decors
STAuthentic
Irregular rough + mattsurface
Woodgrain decors,Material decors
STNatural Pore
Wood structure withmatt-gloss effect
synchronised woodporetexture for some woodgrains,also used with uni decors
ST Offi ce Mediumne surfaceeffect, medium gloss level
All types of decors
ST Aluline Character of a brushedmetal surface
Uni decors, pearlescentdecors
STWaveline
Crosswise, irregular wavylines
Uni decors, metallicdecors, (one side only)
STMatex
Deep brushed wood pore Linear woodgrains, uni andfantasy decors
STFine Pore
Fine wood pore effect,medium gloss level
Woodgrains
STGloss Finish
Even, high gloss texture Woodgrains and also someuni decors
ST Plati-num Ash
Flowered ash pore texture Woodgrains and also someuni decors (black, white)
STCrystal
Grainy structure with matt-gloss appearance
Uni decors, metallic colours
TEXTURE
A diverse and well-balanced decor rangecontaining classic, modern and trend orientateddecorsMany other EGGER materials available in colourmatched nishesRealistic surface texturesMulti-layer surfaces and a variety of core board
options ensure the product has a wide range ofapplication areas.
STANDARD SIZES [mm]:5610 2070 and 2800 2070
CHARACTERISTICS
MELAMINE FACED BOARDSEURODEKOR Melamine faced boards are suitable for interior use and are producedinaccordance with EN . Our large range of decors offers an extensive choice for furnitureconstruction and interior design.
_ EURODEKOR
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
19/40
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
20/40
BOARD TYPE AREA OF APPLICATION PROPERTIES PLANT*
MED Laminate Worktops, furniture frontals, window sills,internal doors, desks, splashbacks, end panels
High impact resistance, can be postformed,all-purpose use, MED certied
HEX, RIO, RAM, BRI, GIF,SJO, SHU
FLEX Laminate Worktops, furniture frontals, window sills alsoused for special postforming requirements
Excellent postforming qualities, high impactresistance
GIF
MICRO Laminate Internal doors, door frames, cornices, pelmets,window sills
High level of exibility GIF
Flammex Laminate Where ame retardant laminate bonded boardsare required
Flame retardant, smoke suppressant GIF
Genuine MetallicLaminate
Laminate bonded boards as decorative designelements
Aluminium surface BRI, GIF,SJO
W Laminate Colour core laminate solution for interior ttings Solid coloured, improves the appearance of thelaminate edge
HEX, RIO, RAM, BRI,GIF, SJO
Painting Grade LaminateUniform coloured Interior ttings Individual colour design GIF
* Plant Overview on page 39
Different grades of laminate for a wide rangeof applicationsThickness range from 0.15 up to 1.20 mmIndividual lengthsVery high wear resistanceColour matched to many other EGGER products
CHARACTERISTICS
EGGER decorative laminates combinehigh wear resistance with the exibility tocreate attractivedesigns. They have a multiple layer structure, which consists of a decorative melamine resinimpregnated paper, one or more phenolic resinimpregnated kraft core papers and an especiallydeveloped balancer paper on the reverse. These components are pressed under high pressure andheat.
LAMINATES
Overlay
Balancer paper
Decorative impregnated paper
Impregnated kraft paper
FLAMMEX EUROCLASS B LAMINATE FLAMERETARDANT LAMINATELaminate Flammex Euroclasss B is classied in accordancewith EN : as laminate type F (ame retardant). Alsotested in accordance with DIN EN .
MED LAMINATE STANDARD LAMINATE FOR THEINDUSTY COLLECTION
Classified in accordance with EN : laminate MEDas HGP (Horizontal General Purpose Postforming). TheLloyds Certicate conrms the MED Quality (Marine EquipmentDirective) and can therefore be used in shipbuilding.
_LAMINATES
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
21/40
Thickness range 5 up to 13 mmMaximum sheet size: 5600 2060 mm
High quality level in accordance with EuropeanstandardsColour matched to a variety of other EGGERproducts
CHARACTERISTICS
FLEX LAMINATE SPECIAL LAMINATE FORPOSTFORMING REQUIREMENTSEGGER FLEX Laminate was developed to meet specialpostforming requirements. Due to its exibility, thislaminate can be used to postform elements with a radius
< 3 mm (depending upon the laminates thickness).
COMPACT LAMINATESEGGER compact laminates and EGGER compact laminates Flammex Euroclass B are compactlaminates according to DIN EN : , with a black core. EGGER compact laminates FlammexEuroclass B are low ammability boards that meet the special requirements of DIN EN incase of re. Both compact laminate grades are especially suitable forclassic interior applicationssuch as tables, work surfaces and wall cladding. The boards have a multilayer structure consistingofmelamine resin impregnated decorative papers and several kraft core papers impregnated withphenolic resins. Depending on the area of application and requirements, a special overlay can beapplied to the decor side to resist abrasion.
COMPACT LAMINATESThe boards are suitable for interior applications, with normalammability but cannot be postformed. The standard core colouris black with brown as optional. Low-ammability EGGER compact
laminates Flammex Euroclass B are classied as CGF (CompactGeneral-purpose Flame-retardant) according to DIN EN : ,and are only available with a black core. Classication: B - s , daccording to DIN EN : . Both grades can be produced withmaximum dimensions of 5600 2060 mm (220.47 81.10).
MICRO LAMINATE THIN LAMINATE FORWRAPING AND COVERINGThis laminate quality is perfectly suited for coveringboards and wrapping proles.
GENUINE METALLIC LAMINATE SPECIAL LAMINATEWITH A REAL ALUMINUM SURFACE
These laminates feature a genuine aluminium surfaceand combine the appeal of metal with a cool elegance.
Overlay Decorative impregnated papers
Impregnated core papers
_ KOMPAKTPLATTE
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
22/40
EUROSPAN WORKTOPS MODELS
MODELSERIES
MODELNUMBER*
/ / / / / / / /
THICKNESSmm
,
LENGTH mm ; ;
EUROLIGHT WORKTOPS MODELS
MODEL SERIES
MODEL NUMBER*/ /
THICKNESS mm , , , ,
LENGTH mm
EUROSPAN WORKTOPSIn our postforming programme, we offer EUROSPAN worktops that suitable for all applications that demandhigh surface quality and durability. The integrated thinchipboard edging in postforming applications guaranteesoptimum surface consistency and shock resistance. Wesupply our solid chipboard worktops up to a thickness of38 mm (1.50) in various versions, lengths and widths.
EUROLIGHT WORKTOPSEUROLIGHT Worktops combine functionality with lowweight. The cardboard honeycomb core meets all thequality standards of traditional chipboard worktops andopens up the possibility for thicker 50 or 60 mm worktops.
_ POSTFORMING
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
23/40
FRONT ELEMENT MODELS
MODEL SERIES
MODEL NUMBER* / / / / / / / / /
THICKNESS [mm] , , , ,,
, , ,
LENGTH [mm] and
LAMINATE BONDED BOARD MODEL
MODEL SERIES
MODEL NUMBER*
THICKNESS [mm] , , , , , , , ,
LENGTH [mm] and
EUROLIGHT LAMINATE BONDED BOARD MODEL
, ,
WINDOW SILL MODELLS
MODEL SERIES
MODEL NUMBER* / /
THICKNESS [mm] ( )
LENGTH [mm] and
* Model numbers relate to different radii and edges. Detailed blueprints available on request.
FRONT ELEMENTSOur front elements create a smooth transition from surface toedge in form and function. A high quality level and functionalityguarantee various possibilities for the use in furniture and interiordesign.
WINDOW SILLSEGGER Window sills create the jointless covering of any ledge and therefo-re they are the ideal solution for new buildings and refurbishments. Theyare viable, durable and available with two models and various attractivedecors.
LAMINATE BONDED BOARDSLaminate bonded boards facilitate the individual combination of anylaminate decor with every supporting panel.
_ POSTFORMING
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
24/40
Very good sound absorptionvaluesVarious elds of application likefurniture, ceilings, partition wallsFull formats and prefabricatedcomponents possibleCoreboards with and without reprotection requirementsColour cooperation system
CHARACTERISTICS
Laminate diagonal perforation . / . / . or linear / / . Black acoustic membrane EUROSPAN Rawboard in mm Black acoustic membrane Laminate balancer paper, linear microperforation
Area of Application
PROACOUSTIC FINEST . / . / . ANDPROACOUSTIC CLASSIC / / .
Laminate diagonal perforation . / . / . or linear / / . Black acoustic membrane EUROSPAN Rawboard in mm Black acoustic membrane Laminate diagonal perforation . / . / . or linear / / .
Area of Application
PROACOUSTIC FINEST FURNITURE BOARD . / . / . ANDPROACOUSTIC CLASSIC FURNITURE BOARD / / .
FORMAT: mm . . . perforated usable length, Finest mm .
FORMAT: mm . . . perforated usable length, Finest mm ( . )
ACOUSTIC BOARDSIn order to consistently offer optimised solutions for a wide variety of different acousticapplications, we have developed a system with numerousdifferent perforations and slottingpatterns. This allows you to combine customised absorption properties with individual andaesthetic requirements. EGGER acoustic products are available in a broad selection ofcoreboards including chipboards, MDF boards and lightweight boards. The comprehensivedesign programme of the EGGER INDUSTRY collection is available for the selection of decorsfor laminate and melamine faced boards.
PROACOUSTIC STOCK PROGRAMME
N E W
_ PROACOUSTIC
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
25/40
Our acoustic boards can be produced on an order-specic basis up to a maximum length of 3,500 mm(137.80). In addition to other formats, fabricating and delivering components is not a problem.EURODEKOR melamine faced chipboard, laminates and EGGER ABS security edging are availablefrom stock.
STOCK RANGE
W ST Platinum White U ST Black
H ST Light Ferrara Oak
H ST Natural Tyrolean Beech
H ST Tobacco Aida Walnut
F ST Aluminium
H ST Light Lakeland Acacia
H ST Romana Cherry
H ST Tirano Pearwood
H ST Light Tennessee Walnut
WALL CLADDING: as xed wall structures oracoustically effective partition walls.
CEILING SYSTEMS: xed, acoustically effective
ceiling elements.
FURNITURE CONSTRUCTION: for front panels or backpanels on free-standing furniture.
SUBSEQUENT INSTALLATION: as ceiling panels to
improve existing room acoustics.
PARTNER
akustik plus GmbH & Co. KGIndustriestrae 4063607 WchtersbachGermany
+49 (0)6053 6 19 91 - 0 +49 (0)6053 6 19 91 - 55
_ PROACOUSTIC
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
26/40
) Explanation: Perforation/ / . mm ( . / . / . ) means mm ( . ) horizontal and mm ( . ) vertical spacing from hole centre to holecentre, with a hole diameter of. mm ( . ) .
PERFORATION PICTURES IN SCALE : PRODUCTSOPEN SURFACE %HOLES PIECE /m
APPLICATION
. / . / . ProAcoustic FinestProAcoustic Finest Furniture boards
. % pcs /m
/ / . ProAcoustic ClassicProAcoustic Classic Furniture boardsProAcousticlight Furniture Backs
. % pcs/m
/ / . ProAcousticEURODEKOR
ProAcoustic EURODEKOR Furniture boardsProAcoustic laminate bonded boards
. % pcs/m
/ / . ProAcoustic EURODEKOR
ProAcoustic laminate bonded boards. %
pcs/m
/ / . ProAcousticEURODEKOR
ProAcoustic laminate bonded boards. %
pcs /m
WALL CLADDING: as xed wall structures oracoustically effective partition walls.
CEILING SYSTEMS: xed, acoustically effectiveceiling elements.
FURNITURE CONSTRUCTION: or front panels or backpanels on free-standing furniture.
SUBSEQUENT INSTALLATION: as ceiling panels toimprove existing room acoustics.
PROACOUSTIC EURODEKOR PROACOUSTIC EURODEKOR FURNITURE BOARD
ORDER SPECIFIC PRODUCTS
Perforated EURODEKOR
Black Acoustic membrane
Area of Applications Perforated EURODEKOR Black Acoustic membrane Perforated EUROSPAN
Black Acoustic membrane Perforated EURODEKOR
Area of Applications
PERFORATIONS OVERVIEW
_ PROACOUSTIC
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
27/40
Perforated laminate Perforated EUROSPAN Perforated laminate
Black Acoustic membrane
Area of Applications
PROACOUSTIC LAMINATE BONDED BOARD
Perforated laminate Cardboard honeycomb core Black Acoustic membrane
Perforated laminate
Area of Applications
PROACOUSTIC LIGHT REAR PANELS
) Explanation: slotting/ . / . mm ( . / . / . ) means mm ( . ) distance from centre slot to centre slot with. mm ( . ) between slots and. mm ( . ) slot width.. mm ( . ) bores in amm ( . ) grid are placed within the slot. Slotting is only available in combination with MDF coreboard.
Slotted EURODEKOR MDF Black Acoustic membrane
Area of Applications
PROACOUSTIC EURODEKOR MDF
Slotted laminate Slotted MDF Slotted Laminate Black Acoustic membrane
Area of Applications
PROACOUSTIC LAMINATE BONDED BOARDS
GROOVE PICTURES IN SCALE : PRODUCTSOPEN SURFACE %HOLES PIECE /m
APPLICATION
LinearMicro / . / .
ProAcoustic EURODEKOR MDF
ProAcoustic laminate bondedboards
. % pcs /m
LinearMicro / . / .
ProAcoustic EURODEKOR MDF
ProAcoustic laminate bondedboards
. % pcs/m
GROOVE OVERVIEW
_ PROACOUSTIC
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
28/40
SQUARE EDGE ELEMENTS LENGTH mm] WIDTH mm] THICKNESS mm]
Solid materials max. min. max. min. max. min.
Frameless lightweight boards max. min. max. min. max. min.
Lightweight boards with frame max. min. max. min. max. min.
Appearance of the end product according to customer requirements. Grooves in both surfaces and all face sides, folds are possible on all face sides.
BOARD TYPE AREA OF APPLICATION ADVANTAGES THICKNESSES
EURODEKOR pre-fabricated furniturecomponents
Furniture and carcass construction, lowershelves and structural oors, tables,counters, interior design
Very good stability thanks to triple-layer structure, outstandinglamination characteristics, wide variety of decor combinationsfor surfaces and edges
mmup to mm
EUROLIGHT pre-fabricated furniturecomponents
Especially thick boards in furniture construc-tion, interior design, worktops, tables, mova-ble walls, divider systems, interior doors
Minimised weight with high stability. Surface layer thickness tai-lored to the target product is possible. Versions with or withoutframe. Can be combined with other EGGER materials / surfaces
mmup to mm
OSB COMBILINEpre-fabricated furniturecomponents
Lower shelves and structural oors withespecially high bending strength andsimultaneous high surface quality.Furniture construction, interior design
Extremely high bending strength, combination of variouscoreboard material layers guarantees the best surfaceproperties
mmup to mm
Acoustic pre-fabricatedfurniture components
Wall and ceiling cladding, ceiling panels,xed installations, movable wall systems,offi ce furniture
Multi-layered construction, very good sound absorption values,linear microperforations in numerous patterns, decor andmaterial combinations
mm
Compact laminatepre-fabricated furniturecomponents
Tables, work surfaces, wall cladding,partition walls
Very strong, extremely sturdy laminate board with highbending strength
mmup to mm
Additional board types available upon request.
Highest precision with customised drilling,grooving, edging etc.Wide range of decorsColour matched materialsVariety of coreboardsLightweight or high bending strength versions
SUBSTRATES:EURODEKOR melamine faced wood-basedmaterial boards, rawboards, MDF boards,OSB-MDF composite boards, lightweight boards,OSB boards, acoustic boards, post-formingelements, compact laminate
CHARACTERISTICS
FURNITURE COMPONENTSAll EGGER coreboards are processed into high-quality furniture components for a variety ofapplications in the kitchen, bathroom and offi ce as well as interior design and commercialprojects. EGGER furniture components stand for high-quality individual products, with a trendyvariety of decors and designs. Numerous edging dimensions and materials are processed onmodern production equipment to precisely meet customer requirements. High-volume ow linesand CNC machines ensure precise drilling, milling and dowelling. Furniture components that areready for installation can be produced; the offering is complemented by high-quality, individualpackaging.
MILLING, GROOVING AND REBATING
_ FURNITURE COMPONENTS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
29/40
SQUARE EDGE ELEMENTS LENGTH mm] WIDTH mm] THICKNESS mm]
Solid materials max. min. max. min. max. min.
Frameless lightweight boards (direct edging), mm ( . )surface layers, -sided with mm ( . ) security or accentedging
max. min. max. min. max. min.
Lightweight boards with frame max. min. max. min. max. min.
Edging materials: Solid materials and lightweight boards with frame according to customer requirements: soft / melamine edging, security edging in ABS, PVCPP; Thicknesses . to mm ( . to . ); lightweight board edging without frame: or -sided with mm ( . ) security edging.
SQUARE EDGE ELEMENTS BOHREN DBELN LENGTH mm] WIDTH mm] THICKNESS mm]
Solid materials max. min. max. min. max. min.
Frameless lightweight boards max. min. max. min. max. min.
Lightweight boards with frame max. min. max. min. max. min. Dowelling solid materials and lightweight boards with a frame is possible on all ends in a or grid.
SQUARE EDGE ELEMENTS LENGTH mm] WIDTH mm] THICKNESS mm]
-sided frame max. min. max. min. max. min.
-sided frame max. min. max. min. max. min.
Frame depths: , or mm ( . , . or . ) frame ( mm ( . ) frame up to mm ( . ) board thickness); frame material: raw chipboard MDF of OSB by request.
FREE FORM ELEMENTS LENGTH mm] WIDTH mm] THICKNESS mm]
Solid material / lightweight boards max. min. max. min. max. / min. /
Milling, grooving, rebating, drilling and edging according to templates upon request; edging from mm ( . ) thickness.
PROCESSING EXAMPLES
EDGING
DRILLING AND DOWELLING
FRAMING OF LIGHTWEIGHT BOARDS
CNC PROCESSING
SPIRAL GROOVESpiral grooves are required for roller shutter cabinets. Weguarantee a perfect result with the use of CNC-machinery.
SHAPED FREE FORM ELEMENTSWe can mill tight radii on the edge of the boards with thesame precision as on the surface colour matched ABSedging is also available.
SURFACE DRILLING, EDGE DRILLING INCLUDING DOWELING
Precise drilling is the foundation for joining furniturecomponents securely. Shelf support drillings as well asdrillings for ttings and functional elements alleviatefurther processing steps.
EUROLIGHT LIGHTWEIGHT BOARD FRAMELESSOn lightweight boards such as our EUROLIGHT , with an 8 mm(0.31) surface layer, we apply 2 mm (0.08) security or accentedging directly without frame up to 50 mm (1.97).With the addition of precise bore holes and rear panelgrooves, they constitute an ideal bought-in product with dualbenets thanks to their light weight in purchasingand shipping.
EUROLIGHT LIGHTWEIGHT BOARD WITH FRAME
Lightweight boards feature optimum prerequisites forapplications with a 3 and 4 mm (0.12 and 0.16) but also an8 mm (0.31) surface layer. 10, 38 or 65 mm (0.39, 1.50 or2.56) frame options ensure that solid material is present atthe edge for the desired tting or assembly technologies.
_ FURNITURE COMPONENTS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
30/40
THICKNESS WIDTH LENGTH
Calendaring . up to. mm
mm wide jumbo roll or cut to the required width depending on the thickness between - mAvailable upon request
Extrusion . , . und. mm
between - mm between - m, available upon request
Edging for the EGGER ZOOM collection is available from stock in the following dimensions: 22 0.4 mm, 200 m rolls (Special decors only); 23 0.8 mm, 100 m rolls(Special decors only); 43 1.5 mm, 75 m rolls (worktop designs only) 23 2.0 mm, 31, 45, 54 and 64 mm, 75 m rolls
Established 1996 in Gebze, TurkeyAdditional sales offi ce and stock Roma GmbH,Rheda Wiedenbrck, GermanyStrong both on prole extrusion and calendaringproductionOne of the largest edgebanding companies
worldwide
ROMA A MEMBER OF THE EGGER GROUP
EDGINGEGGER Edging provides an excellent nish for all our melamine faced products.Whether colour matched to the boards or as a thin chipboard support edging for lightweightboards our edging material is theperfect solution for nishing any exposed edges.
ABS/PVC EDGINGThermoplastic edgebands manufactured by Roma have an excellent nishfor all EGGER melamine faced products, in terms of color, grain, textureand gloss levels. Two separate production technologies; namely extrusionand calendaring, are used in order to offer the best combination ofproducts at competitive price levels.
_ EDGING
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
31/40
LAYERS THICKNESS WIDTH LENGTH
One-layer . mm mm wide jumbo roll or cut to the required width approx. m, available upon request
Multi-layer . mm mm m
MELAMINE EDGING
REAL ALU EDGING
THIN CHIPBOARD SUPPORT EDGING
ACCENT EDGING
Melamine edging is the edge nishing standard for all wood-basedmaterials. It is available as single-layer or multi-layer printed edging,and matches our decors exactly in terms of colour variations and texture.EGGER melamine edging is available from stock, with or without hot-meltadhesive coating.
Real-Alu edging consist of a 0.1 mm real aluminum, laminated with aspecial technique on an ABS or PVC base material. Its available as a 0.5,1.0 & 2.0 mm thick edge in jumbo roll form ready to be cut to speciccustomer requirements. A protective foil is applied on the surface toprevent scratching. The aluminum surface decors that are available are:Alu Silk Mat, Brushed Aluminum, Stainless Steel optic, Brushed Goldand Mirror Alu.
Suitable as support edging for lightweight boards or low densityboards.
Width: 10 up to 100 mmThickness: 2.5 and 3.0 mmMaterial: Thin chipboard or Thin MDF HDRoll diameter: max. 800 mm
Accent edging is made of acrylic (PMMA), the only suitable material fortransparent applications and combines the transparency of this thermo-plastic material with the quality of premium decors. The printed designsare protected by the transparent surface and help achieve perfect
seamless corners with no window-frame effect. The edging is availablewith or without high-gloss and as a 1.0, 1.3, 1.5 or 2.0 mm thick edging invarious widths based on the customer demand.
ROMA LASER EDGINGWith the development ROMA LASER EDGING we introduce somethingnew and exciting. All edge materials of ROMA are coated afterwardswith Laser Coating at the back. A perfect edge nish can be createdwithout a visible glue joint. Roma offers this product for a wide numberof decors with low minimum order quantities.
_ EDGING
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
32/40
PRODUCT FIRE CLASS ADVANTAGES THICKNESSES PLANT
EUROSPAN Flammex EP B/B /M CE
B-s ,d /B /M Certied according to EN - and DIN - ,surface suitable for laminating
up to mm ( .
to . )
RAM
EGGER thin chipboard EP B/B CE
B-s ,d /B Approved low ammability building board for load-bearing applications in accordance with EN - ,for roof elements
up to mm ( .
to . )
WOE
EURODEKOR FlammexB/M CE
B-s ,d /M Cer tied according to EN - and DIN - ,available in a range of decors
up to mm ( .
to . )
RAM,RIO, SJO
Flammex laminate B /M Certied according to DIN - and NF P -available in a range of decors
Nominalthickness. and. mm( . and. )
GIF
Flammex Euroclass Bcompact laminate
B-s ,d Certied according to EN - ,available in a range of decors with a black core
, , , , and mm( . , . ,
. , . ,. and
. )
SJO
Certied according to EN - in re classEUROCLASS B,d0 enhanced re resistanceLow smoke formationNo dripping while burningCertied according to DIN - in re class BCorresponds to French re class MAll low ammability products as well asnumerous other EGGER products are available inmatching decors and coloursGood processing characteristics
Standard formats:5610 2070 mm and 2800 2070 mm(220.87 81.50 and 220.87 110.24)Maximum laminate width 1300 mm (51.18)
Additional dimensions upon request
CHARACTERISTICS
LOW FLAMMABILITY PRODUCTS FLAMMEX TheFlammex product spectrum offers a range of low ammability products that provide additionalprotection in case of a re. When a re starts, the boards are able to delay the ash-over point(the time it takes until the re fully develops). This can signicantly increase the amount of timeavailable to initiate emergency response measures.In addition to the essentialprotective function in case of re, low ammability EGGER productsalso guaranteedesign versatilitythanks to decors and colours that match other products.
_ LOW FLAMMABILITY PRODUCTS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
33/40
The EGGER Flammex icon identieslow ammability products with aproven reaction to re.
EGGER FLAMMEX ICON
FLAMMEX LAMINATEEGGER Flammex laminate can be classied as laminate typeF (ame retardant) in accordance with EN : . In caseof re, it meets the special requirements of buildingmaterials class B according to DIN - : - andthe French re behaviour category M1.
FLAMMEX EUROCLASS B COMPACT LAMINATE
EGGER compact laminate is classied as CGF (compactgeneral-purpose ame-retardant) in accordance withDIN EN - : . Thanks to the board structure, it isself-supporting and guarantees high durability.
EUROSPAN FLAMMEX E P B/B /M CEEUROSPAN Flammex E P B/B /M CE is certifiedaccording to the fire class EUROCLASS B,s -d pursuantto EN - and the special requirements of buildingmaterials class B , pursuant to DIN - : - , andmeets the requirements of the French fire behaviourcategory M . The low flammability chipboard with a redcore is excellent for melamine application and lamination.
EURODEKOR FLAMMEX B/M CEEURODEKOR Flammex E P B/M CE stands for reliablere protection and decorative design exibility. It isclassied as a low ammability, melamine-faced chipboardin the re class EUROCLASS B-s ,d , as well as M . Youhave access to the entire EURODEKOR programme in thecolour and decor match. Fire protection requirements aremet and design freedom is offered by this modern materialmade from a renewable resource.
FIRE PROTECTION WITH A COREBOARDS
A2-laminate bonded boards in matching colours with EGGERlaminate decors are a new highlight. These special newproducts are produced by the EGGER partner Akustik+. Thetested and certied joining elements are based on mineral,non-ammable coreboards laminated with EGGER Microlaminate. Of course these A2-laminate bonded boards can
also be produced as acoustically effective elements. Thecolour for the coreboard was adapted to the hue of an MDFboard. We hereby accentuate our claim to offer EGGERmaterials in matching colours.
FORMATS: 2800 1260 12, 16 and 18 mm (110.24 49.61 0.47, 0.63 and 0.71)
N E W
_ LOW FLAMMABILITY PRODUCTS
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
34/40
BOARD TYPE PRODUCTION SIZES STRUCTURES PLANT
EURODEKOR
SM, ST , ST BRI
Laminates SM, ST , ST GIF
EGGER EUROLIGHT and ProAcoustic, formats and textures with minimum quantity of 260 m (2,799 square feet) by request
Individual design diversityNumerous coreboards availableAvailable from a quantity of just 260 m(2,799 square feet)Decor optimised to minimise waste
CHARACTERISTICS
DIGITAL PRINT INDIVIDUAL SOLUTIONSThink without Limits EGGER digital solutions open a new chapter in the eld of furniture andinterior design. Individual requirements are realised to perfection with virtually unlimited decordesign possibilities and a broad selection of coreboards. With the ability to produce smallbatches, this exibility can create new areas of application.
_ DIGITAL PRINT
PRODUCT GROUPS EURODEKOR melamine faced Chipboards EGGER Laminates EUROLIGHT Lightweight Boards ProAcoustic Boards
N E W
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
35/40
_ DIGITAL PRINT
POSSIBILITY We scan your material sample with our high-performancescanners and reproduce it close to photo quality. Special decordesigns, textures and plastic properties can be created asrequired with our variable scanner units.
FROM THE INITIAL IDEA THROUGH TO THE FINAL PRODUCT WE OFFER INDIVIDUAL SOLUTIONS FOR YOU IN ALL PHASES OF DECOR DEVELOPMENT.
POSSIBILITY You provide us with image and / or decor data for printing. Orwe develop an individual decor for you based on your ideasand image data.
File format: *tif*Resolution: min. 300 dpi at 1:1 scalingData transfer: via upload, HDD, CD-R, DVD-R
We produce small batches from a quantity of just 260 m (2,799 square feet) on nearly all coreboards offered by the EGGER GrProduction after approval of binding colour reference samples.
AREAS OF APPLICATIONEGGER digital solutions are used wherever a high degree ofindividuality is demanded. For applications in exclusivefurniture construction, commercial furnishings and shoptting as well as custom shop equipment, EGGER digitalprint products are the optimum solution.
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
36/40
PEFC/04-31-0552
Promoting SustainableForest Management
www.pefc.org
In our core values we have allocated the sustainable use of wood-based materialsas the highest priority.
FROM TREE TO PRODUCT A CLOSED CYCLE
We use fullyintegrated locations where we recycle the wood. This extends from the solid wood production inthe sawmill, up to the production of wood-based materials such as laminate oorings. Wood residues andrecycled wood that cannot be used in production are utilised as thermal fuel in our biomass power plants togenerate energy for production. We therefore optimise our use of wood to helpprotect our climate.
We have incorporated all the processes of our philosophy into our ecological cycle.
* PEFC (Programme for the Endorsement of Forest Certication Schemes)and/or FSC (Forest Stewardship Council)
RECYCLING AND THERMAL UTILISATION OF WOOD
Part of the wood we use consists ofrecycled wood residues.Those wood materials that accrue during production andwhich cannot be used materially are used in ourbiomasspower plants. The energy created through this is utilised forthe drying of the cut timber and in the production of wood-based materials.
ENVIRONMENTAL PROTECTION STARTS WITHSUSTAINABLE FORESTRY Responsible and sustainable forestry has the highestpriority at EGGER. For the production of wood materialsEGGER exclusively uses wood from forest thinnings andwaste wood in selected quality from sawmills, as well assuitable recycled wood. Within the chain of custody, ourplants are PEFC* and / or FSC*-certied depending onthe availability of wood.
_ ECOLOGY
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
37/40
EPDs according to DIN ISO (Typ II Enviromental Product declaration)
CERTIFYING THE SUSTAINABILITY OF BUILDING(DGNB, BREEAM, HQE )
CENTRALDATABASE
for architectsand planners
* Established from the greenhouse potential of the EGGER EPDs (in kg CO equivaleon the basis of the production gures 2010/11)
** An average European household with three people produces approximately 4.5 tonnof CO per year, source: according to EUROST AT 08/2008
WE REDUCE CO
CERTIFYING THE SUSTAINABILITY OF BUILDINGS
Through the processing of wood in EGGER products, annually
4.64 mill. tons of CO * are materially bound;this corresponds to the CO emission from1.03 mill. households**. Through the use of recycled wood residues we
save the environment1.53 mill. tons CO per year,and through our biomass power plants we annually achieve a
CO saving of695.000 tons in comparison to thecombustion of natural gas.
ENVIRONMENTAL PRODUCT DECLARATIONS
We had thesustainability andenvironmental compatibility ofour products conrmed through independent tests and havepresented this information in ourenvironmental productdeclarations (EPDs). These are used in certifying thesustainability of buildings. EPDs are available for all key EGGERproduct groups. Moreover, we have certicated our plant in
Unterradlberg (AT) in 2010 Environmental Management andAudit Scheme.This voluntary environmental managementsystem supports EGGER with the continuous improvementof the company environment protection.
Various building certication systems are currently in use, such as DGNB in Germany, HQEin France, Breeam in Great Britain and LEED in the USA. A European standard-setting bodyis working towards convergence of the existing standards.
_ ECOLOGY
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
38/40
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
39/40
PRODUCT BAR BEV BRI BUE GAG GIF HEX MAR RAU RAM RIO SJO SHU URB WIS WOE
FlammexGenuine Metallic Laminate
W
painting grade Compact laminates Compact laminates Flammex Euroclass BWORKTOPS / WINDOW SILLS / FRONT ELEMENTS / LAMINATE BONDED BOARDS PAGE Worktops EUROSPAN/ EUROLIGHT
Window sills Frontal elements Laminate bonded boards ACOUSTIC BOARDS PAGE ProAcousticFURNITURE COMPONENTS PAGE Furniture componentsEDGING PAGE ABS Edging / Accent edging Melamine edging
Thin chipboard support edging
LOW FLAMMABILITY PRODUCTS PAGE DIGITAL PRINT PAGE EURODEKOR
Laminates
PRODUCT BAR BEV BRI BUE GAG GIF HEX MAR RAU RAM RIO SJO SHU URB WIS WOE
ST. JOHANN IN TIROL SJO AT WRGL WOEAT UNTERRADLBERG URB AT BRILON BRI DE BEVERN BEV DE GIFHORN GIF DE BNDE BUE DE MARIENMNSTER MARDE WISMAR WIS DE HEXHAM HEX UK BARONY BAR UK RAMBERVILLERS RAMFR RION DES LANDES RIO FR SHUYA SHU RU
GAGARIN GAG RU RDUI RAURO
GEBZE GEB TR
PLANT LOCATIONS SALES OFFICES TOURS FR
ZULTE BE TISTRUP DK KRIENS CH UDINE IT ENUR SI VARADIN HR HRADEC KRLOVCZ POZNA PL BUDAPEST HU SMEDEREVO RS SOFIA BG BUCURETI RO STANBUL TR VILNIUS LT MINSK BY KIEV UA MOSCOW RU SHANGHAI CN TOKYO JP NEW DELHI IN SANTIAGO DE CHILE CL
_ PLANT OVERVIEW
-
8/11/2019 1 94774 PP Industry-Produkte-Solutions En
40/40
s a n
d a m e n
d m e n t s
.
FRITZ EGGER GmbH & Co. OGHolzwerkstoffeWeiberndorf 206380 St. Johann in TirolAustria +43 50 600-0 +43 50 600- 10111
EGGER Panneaux & DcorsUsine de Rion des LandesAvenue dAlbret BP 140371 Rion des Landes Cedex 01France +33 (0)5 58 56 81 81 +33 (0)5 58 56 81 39
info.fr @egger.com
EGGER Holzwerkstoffe WismarGmbH & Co. KGAm Haffeld 123970 Wismar Germany +49 3841 301-0 +49 3841 301- 20222
EGGER KunststoffeGmbH & Co. KGIm Weilandmoor 238518 GifhornGermany +49 5371 865- 0 +49 5371 865-64209
info-gif @egger.com
EGGER BeschichtungswerkMarienmnster GmbH & Co. KGGewerbegebiet 437696 Marienmnster-VrdenGermany +49 5276 9894-0 +49 5276 9894- 660
info-mar @egger.com
EGGER Holzwerkstoffe BrilonGmbH & C0. KGIm Kissen 1959929 BrilonGermany +49 2961 770- 0 +49 2961 770-62222
EGGER BevernGmbH & Co. KGFlttenweg 1037639 BevernGermany +49 5276 9894-250 +49 5276 9894-65600
FRITZ EGGER GmbH & Co. OGHolzwerkstoffeTiroler Strae 163105 UnterradlbergAustria +43 50 600-0 +43 50 600-12100
SC EGGER Romnia SRLStr. Austriei 2PO Box 38725400 Rdui, jud. SuceavaRomania +40 372 438000 +40 372 468000
OOO EGGER DrevproduktJushnoje Chaussee 1155908 ShuyaRussia +7 49351 39000 +7 49351 39111
EGGER Panneaux & DcorsUsine de RambervillersZI Blanchifontaine88700 RambervillersFrance +33 (0)3 29 68 01 01 +33 (0)3 29 68 01 02
info.fr @egger.com
EGGER (Barony) LimitedBarony RoadAuchinleck, AyrshireKA 18 2LLUnited Kingdom +44 1290 426026 +44 1290 424420
EGGER (UK) LimitedAnick Grange RoadHexham, NorthumberlandNE46 4JSUnited Kingdom +44 1434 602191 +44 1434 605103
EGGER ElementeGmbH & Co. KGDaimlerstrae 34-4032257 BndeGermany +49 5223 6866-2710 +49 5223 6866-67149
FRITZ EGGER GmbH & Co. OGHolzwerkstoffeFabriksweg 11a6300 WrglAustria +43 50 600-0 +43 50 600-13039
Production sites
Roma Plastik A.S.GEPOSB41400 Gebze, KocaeliTurkey +90 262 751 30 50 +90 262 751 30 51
OOO Gagarinskiy Fanerniy ZavodEzhvinsky proezd 1215010 Gagarin, Oblast SmolenskRussia +7 48135 79300 +7 48135 79311
www.egger.com