05 Materials Technical Informations
-
Upload
eustahije-brzic -
Category
Documents
-
view
215 -
download
0
description
Transcript of 05 Materials Technical Informations
-
XXX
04
05 - Materials - technical
features
- Elastomer and plastic materials table
- Grease - technical specifications
- Lubricants for machine tools
- Recommended oils for pneumatic circuits
05
-
XXXI
Materials technical features
Polymer 400
Paraliq GA 351Mineral grease fluorinated with PTFE that fills the
Paraffin oil based grease with silver soap thickener. microasperity of metallic surfaces to the molecular level,
Adhesive,with a temperature range from -40 to 120C. preceding metal-metal contact and so reducing
Suitable for food applications, is a medium lasting operating temperature, friction and the wear.
grease Producer: Kluber Lubrication - GermanyGreen coloured , soft, and adhesive. Has excellent
washout resistance, operating temperature from -20C
Berlub FR Bto +160C.
Synthetic nased mineral grease with special lithium Excellent adhesive properties make the grease
soap thickener. Resistent to water, both hot and cold, to extremely long lasting.
steam and detergents. Very good adhesive properties , Producer : Oil Center research-USA, distributor
rust preventing capabilities, temperature range from -50 tecnolubeseal-Italia.
to +140 C.Used on valves ; cylinders series 1380-1600(25-32-
Long lasting grease ideal for low temperature 40), guided compact cylinders series 6100 and 6200
applications improves sliding properties of elastomers series slide units.
on steel and non ferrous materials
Producer: Bechem. Molycote PG 54
Used on low temperature applications.Silocon based grease with litium thickener.
White-pink coloured , soft, water resistant, operating
Turmtemp II/400RS 2temperature from -50C to +180C.
Mineral grease white colour, pasty and smooth with Low friction coefficient makes this grease suitable for
perfluoric thickener. for applications where good sliding properties are
Temperature range from -30C to +260C requested.
Compatible with all materials ( it is recomended to clean Good adhesive properties make the grease long lasting.
all surfaces befor applying the grease in order to Producer:Down Corning Corporation-USA
increase adhesivity and performance) prevents Normally used on "LOW FRICTION" cylinder series
electrostatic charges build up. 1319-1380-1280.
Producer: Lubcon-Germania.
Suitable for oxygen and medical applications
Molycote 111
Dimethyl silicone based grease with inorganic
thickener. Has a heavy-consistency (class 2 & 3) which
makes it suitable for low speed applications where a
smooth movement is required
Temperature range from -40C to +200C with good
resistence to water . Very good adhesive properties ;
extremely long lasting.
Producer: Down Corning Corporation-USA. Normally
used on rodless cylinder series 1600 50-63 and on
slow speed applications.
ELASTOMER AND PLASTIC MATERIALS
GREASE SPECIFICATIONS
CODE
(According to ISO 1629)
Working
temperatureChemical description
EPDM -40C +100C ethylene propylene diene monomer
FFPM - FFKM -5C +200C Elastomero perfluorurato
FPM - FKM -5C +150C Fluoro rubber
HNBR -5C +120C Hydrogenated acrylonitrille butadiene
NBR -5C +70C Nitrile rubber
PUR -30C +80C Polyurethan
EU -30C +80C Injection molding polyurethan
PTFE -150C +200C Polytetrafluoroethylene
POM -40C +110C Acetalic resin
PA -40C +120C Polyamide (Nylon)
PC -100C +130C Polycarbonate
PBT -40C +130C Polybutylene terephthalate
ELASTOMERS
PLASTIC MATERIALS