01-04/16 Newsletter - Ceratizit · Product presentation The MaxiMill 491 shoulder milling system...
Transcript of 01-04/16 Newsletter - Ceratizit · Product presentation The MaxiMill 491 shoulder milling system...
Pag
e 01
New
slet
ter
01-
04/1
6
We have expanded our product range to feature a 90° shoulder milling system with eight usable cutting edges. With the development of the MaxiMill 491, new avenues have been explored technologically. As a result, a new shoulder milling system was born – and one that not only distinguishes itself in its easy handling.
1. Product presentationThe MaxiMill 491 shoulder milling system produces exact 90° profiles. Precision in-serts produced with tolerance H in the BLACKSTARTM and SILVERSTARTM grades guarantee outstanding axial and radial run-out, long tool life and high-quality surfaces. The tools with irregular pitch and perfectly adapted approach angles ensure reduced vibration and a smooth cut. The milling system is suitable for both finishing as well as roughing operations. As the approach angle is exactly 90° and very good surfaces can be achieved, no additional machining operation is necessary. Just as with the insert having eight cutting edges, this is a major reason why the MaxiMill 491 shoulder milling system is exceptionally economical.
Simple concept, unparalleled technology: MaxiMill 491 – the new 90° shoulder milling system featuring BLACKSTARTM and SILVERSTARTM grades
Product advantages:
Easy handling Exceptionally economical Excellent performance at the best quality Attractive price-performance ratio
01-04/16
NewsletterCONTENTS
01. Product presentation
02. System description
03. Advantages and benefits
04. Competitor comparison
05. Sales support
06. Product launch and programme
07. Availability
Pag
e 02
New
slet
ter
01-
04/1
6
2. System descriptionThe MaxiMill 491 shoulder milling system consists of the tool and the corresponding insert with eight cutting edges.
2.1 Tool details
Precision-ground insert in the H tolerance range Double-sided insert with
positive clearance angle
8 effective, usable cutting edges per insert at 8 mm ap max!
Wiper edge length of 1.8 mm
–F10, –F50, –M50, and –R50 chip groove geometries
Start programme insert size SNHU 120408... 0.8 mm corner radius!
Quick and easy insert mounting
Torx Plus clamping screw profile
Exact 90° profile
Patented system
Close and wide pitch tools in the programme
Long-lasting tool bodywith new base material
Maximum repeatability thanks to new insert seat design with generous contact faces.
Excellent repeatability when changing the cutting edge
Maximum stability during roughing operations
Positive axial anglein mounted position
Perfectly adapted chip pockets
2.2 Insert details
Pag
e 03
New
slet
ter
01-
04/1
6
3. Advantages and benefits
• Quick and easy insert change thanks to: 1. new insert seat design 2. insert change also in the machine
➜ ▲ Easy and time-saving handling
• Eight usable cutting edges per insert, therefore high cost-effectiveness per cutting edge• Approach angle exactly 90°, rendering the need for finishing with a second additional tool mostly unnecessary• Long-lasting tool body made of a new base material with ‛hard&tough’ coating
➜ ▲ Maximum economic efficiency
• Precisely ground inserts (tolerance H)• Perfect axial run-out precision and concentricity• Optimal chip evacuation thanks to perfectly adapted chip pockets• Very good repeatability thanks to innovative insert seat design with generous contact faces
➜ ▲ Maximum performance and best quality
• For steel, cast iron, stainless steel and aluminium• Smooth cut, therefore low tendency to vibration even with low-power machines• Metric tools available as inch tools (from June)• Close and wide pitch tools in the programme• Coolant directly on the cutting edge, therefore suitable for emulsion, MQL or compressed air
➜ ▲ Wide application range Universal application
Advantages Benefits
4. Competitor comparison Before introduction to market, we have put the new 90° shoulder milling system to extensive practical testing and compared the milling results with those of the competition. In this case, the MaxiMill 491 system has achieved very good results. (Multiple customers have said: “Sensational result, sensational tool!”)
5. Sales support We are supporting the product launch with the following measures (for the most part in DE, EN, FR, IT and ES languages):
Presentations Newsletters Product videos Ad campaign (focus: DACH trade press) Press release Programme extensions catalogue 01/2016 Cutting Tools Price and stock list 2016 Triangle flyers E-Techstore (set-up of the MaxiMill491 product portfolio)
• Construction files (step, dxf) Demo kit
Pag
e 04
New
slet
ter
01-
04/1
6
6. Product launchThe MaxiMill 491 90° shoulder milling system extends the product range of Cutting Solutions by CERATIZIT. The product launch will begin with the 12 mm sized inserts and includes the 32 – 160 mm nominal diameter range (SNHU 1204...). Tool holders for shell milling cutters, end mills and milling cutters with threaded shank in metric sizing are available with immediate effect. The shell milling cutters are available with a wide or narrow pitch.
6.1 Tool product programme for market launch in April 2016
Material number Description
11953230 G491.32.R02-12
11953180 C491.32.R.02-12-B-40
12047362 C491.32.R.02-12-A-63-250
11950456 A491.40.R.04-12
12047354 A491.40.R.03-12
11950477 A491.50.R.05-12
12047355 A491.50.R.04-12
11942147 A491.63.R.06-12
12047357 A491.63.R.05-12
11950614 A491.80.R.08-12
12047358 A491.80.R.06-12
11953001 A491.100.R.10-12
12047359 A491.100.R.07-12
11953017 A491.125.R.12-12
12047360 A491.125.R.08-12
11952977 A491.160.R.14-12
12047361 A491.160.R.09-12
6.2 Insert product programme for market launch in April 2016
Insert designation For material
SNHU 120408FR-F10 CTWN215 N
SNHU 120408SR-F50 CTPM240 M
SNHU 120408SR-M50 CTCP230 P
SNHU 120408SR-M50 CTPM240 M
SNHU 120408SR-M50 CTPP235 P
SNHU 120408SR-R50 CTPK220 K
SNHU 120408SR-R50 CTCK215 K
Pag
e 05
New
slet
ter
01-
04/1
6
7. Availability
Metric tools forShell milling cutters available ex stockEnd mills available ex stockMilling cutters with threaded shank available ex stock
Tools in inch dimensions available from June 2016
EDITORIAL INFORMATION
Publisher:
CERATIZIT Austria Gesellschaft m.b.H. AT-6600 Reutte/Tyrol
T. +43 (5672) 200-0
F. +43 (5672) 200-502
www.ceratizit.com