- Thermal Mechthermal-mech.com/wp-content/uploads/2016/03/Hans... · Address: No. 72 Optics Valley...
Transcript of - Thermal Mechthermal-mech.com/wp-content/uploads/2016/03/Hans... · Address: No. 72 Optics Valley...
ChinaTurkey
India
Iran
Russian
JapanSouth Korea
UAE
GermanyPoland
USA
Mexico
ColombiaBrazilPeru
Argentina
IndonesiaMalaysia
ThailandVietnam
Philippines
Australia
New Zealand
Han’s GS Advanced Laser Cutting Machine
www.hansgslaser.com
WUHAN HANS GOLDENSKY LASER SYSTEM CO.,LTD.
Add:No.72,Optics Valley Avenue, East lake High-Tech Development Zone, Wuhan P.C: 430223Tel: +86-27-8792 5937 Fax: +86-27-8792 5936Website: www.hansgslaser.com E-mail:[email protected]
WUHAN HANS GOLDENSKY LASER SYSTEM CO.,LTD
Wuhan Hans Goldensky Laser System Co., Ltd. is subsidiary company of Han's Laser Technology Industry Group Co., Ltd. (stock code: 002008). We are high-tech enterprise specialized in R&D, manufacture and provide laser cutting, laser welding, laser cladding/quenching, and high-speed laser punching equipment and solutions.
Most of the products of our company has fully independent intellectual property rights, widely used in sheet metal processing, steel metallurgy, petroleum, tobacco,automobile, machinery, aerospace, kitchen ware & home appliances and other manufacturing industries. In the future, the company will continue to be based on innovation of new and high echnology, using its own technology advantages to contribute to the industrialization development of laser processing complete equipment.
2001
2003
1998
2006
2007
2007
2012
2016
2013
Produced 50000W CO2 laser generator,which stands for the world’s highest level of laser.
Invited the first set of 10000W CO2 laser generator with power level of 10000W.
First set of ten thousand power level TEA was produced successfully, which is rarely all over the world.
Developed GS-DKJ02 Laser Plastic Membranes Punching Machine, which have the highest market share.
Developed GS-LFDS series high power fiber laser cutting machine.
Become a member of Han’s Group.
Established by Dr.Chen (Professor from Huazhong University of science and technology).
COMPANYHONOR
COMPANYHISTORY
COMPANY PROFILE
Address: No. 72 Optics Valley Avenue, East lake High-Tech Development Zone, Wuhan, China P.C:430223Tel: +86 27 8792 5937 Fax: +86 27 8792 5936 Website: www.hansgslaser.com E-mail: [email protected]
Wuhan Hans Goldensky Laser System Co.,Ltd.
David, chief editor of INDUSTRIAL LASERS, authority of Laser industry in US, regards Hans GS stands for the highest technology level of gas type laser in China.
We are still on the way ...
Ea�� ma����� m���r�, ����� �ust���� v���e�.N� �u���es� to� �m��� ,n� �r����� to� �i�.
ENTERPRISE TENET
Model
Medium of laser
Cutting range (optional)
Positioning accuracyRepeated positioningaccuracyMax positioning speedOutput power of laser source
GS-LFD3015GS-LFD4020GS-LFD6020
Fiber
±0.03 mm±0.01 mm120 m/min
Net weight More than 5450 kgs500 W - 1500 W
3000 mm × 1500 mm4000 mm × 2000 mm6000 mm × 2000 mm
Model
Medium of laser
Cutting range (optional)
Positioning accuracyRepeated positioningaccuracyMax positioning speedOutput power of laser source
GS-LFDS3015GS-LFDS4020GS-LFDS6020
Fiber3000 mm × 1500 mm4000 mm × 2000 mm6000 mm × 2000 mm
±0.03 mm±0.01 mm120 m/min
1000 W - 4000 WNet weight More than 11440 kgs
Model
Medium of laser
Cutting range (optional)
Positioning accuracyRepeated positioningaccuracyMax positioning speedOutput power of laser source
GS-LFTP3015GS-LFTP4015GS-LFTP6015
Fiber3000 mm × 1500 mm4000 mm × 1500 mm6000 mm × 1500 mm
±0.03 mm±0.01 mm90 m/min
500 W - 2000 WNet weight More than 6070 kgs
Address: No. 72 Optics Valley Avenue, East lake High-Tech Development Zone, Wuhan, China P.C:430223Tel: +86 27 8792 5937 Fax: +86 27 8792 5936 Website: www.hansgslaser.com E-mail: [email protected]
Wuhan Hans Goldensky Laser System Co.,Ltd.
50 10 15 20 25 mm
500 W
700 W
1000 W
1500 W
2000 W
2500 W
3000 W
Cutting Thickness for Different Material
Carbon SteelStainless SteelAluminumBrass
Carbon SteelStainless SteelAluminumBrass
Carbon SteelStainless SteelAluminumBrass
Carbon SteelStainless SteelAluminumBrass
Carbon SteelStainless SteelAluminumBrass
Carbon SteelStainless SteelAluminumBrass
Carbon SteelStainless SteelAluminumBrass
Robot 3D laser cutting
2 mm stainless steel
5 mm carbon steel
6 mm & 8 mmcarbon steel
10 mm carbon steel
10 mm stainless steel
4 mm copper plate
15 mm carbon steel
1 mm stainless steel
0.5 mm stainless steel pipe
GS-LFDS3015 / 4020 / 6020 / 2513
GS-LFDS3015 / 4020 / 6020
GS-LFTP3015 / 4015 / 6015
Single working table fiber laser cutting machine
Closed fiber laser cutting machine with exchangeable pallet
Fiber laser cutting machine for sheet & tube
1 mm stainless steel pipe
2.5 mm carbon steel pipe
2 mm stainless steel pipe
Laser powerMedium of laserWelding range
Optional
According to applicationFiber
Laser source Fiber laser source
According to the robotFixed table
Gantry structure tableIntegrated with present production line
3D robot fiber laser cutting performance characteristics:Flexibility processing. Three-dimensional cutting software & robot realize complicate hook face cutting at one time easily, which represent the most advanced level of automated production in laser cutting.
Capable to cut sorts of metal board with air blowed; the cutting speed can reach dozens of meters per min.
Good quality of cutting edge with less deformation, flat and elegant surface.
Adopt high precision drive structure with imported service motor, ±0.03mm positioning precision.
The laser source and machine tool is comprehensively sealed to ensure the security of the operator, the whole working process can be viewed and inspected through the glass.
HIGH SPEED
HIGH QUALITY
HIGH PRECISION
HIGH PROTECTION
Water ChillerHighly clean water circulation system with deion device and online monitoring system for water conductivity. The cooling water circulation pump, water tank, valves and pipes are all stainless steel.
Gear & rack, guide railAdopts the most advanced inclined grinding technique, accuracy grade is up to DIN6h grade, GB4 grade, the world’s highest grade for quantity production.
●Excellent Beam Parameter Product (BPP)●Constant BPP Over Entire Power Range●Small Focus over Large Working Distance●Over 30% Wall-plug Efficiency●Maintenance-free Operation
Address: No. 72 Optics Valley Avenue, East lake High-Tech Development Zone, Wuhan, China P.C:430223Tel: +86 27 8792 5937 Fax: +86 27 8792 5936 Website: www.hansgslaser.com E-mail: [email protected]
Wuhan Hans Goldensky Laser System Co.,Ltd.
Cutting headImported cutting head from Switzerland. The Z axle has floating function with stable performance, which can prevent the affetion caused by the unevenness of the cutting material.
CNC systemImported CNC system ensure the high dynamic properties with movement control software and hardware, adopting field bus technology.
Driving systemThe max rotate speed is 2500 pm/min. It can automatically compensate and correct the cutting path2500 pm/min. It can automatically compensate and correct the cutting path.
Working table12mm square steel to weld the working table.Handled by vibration aging treatment to eliminate the pre-stress force of mechanical parts.
Important Parts
It is widely applied to gear, axle, drive shaft, radiator, clutch and the engine exhaust pipe, turbocharger shaft, the chassis automobile parts manufacturing, and has become the standard process of auto parts manufacturing.
Adopt laser cladding technology to implement reproducing processing or upgrading into new laser hardening products that equal to or higher than the original ones.Not only energy saving, material saving, environmental protection, but also promote the overall performance of industry machinery and equipment.
Laser microporous processing is to make a series of small holes on the packaging materials which can easily tear and adjust the moisture inside the packaging.
This set of equipment can realize ventilation and tar reducing through punching cypress paper of cigarette filter tip in production line and to reduce the harm of smoking to human body.
IPG Photonics Corporation is the world leader in high power fiber lasers and amplifiers. Founded in 1990, IPG pioneered the development and commercialization of optical fiber-based lasers for use in a wide range of venues such as materials processing, telecom, medical, scientific and other advanced applications.
Fiber lasers have revolutionized the industry by delivering superior performance, relia bility and usa bility at a lower total cost of ownership compared with conventional lasers, allowing end users to increase productivity and decrease operating costs.
Electro-optical conversion rateStroke (X, Y, Z)Max workpiece lengthMax workpiece diameter
45%2500 mm, 400 mm, 400 mm
Model GS-CQ25
2800 mmΦ800 mm
Verall dimensions (L, W, H)Stability of the power
5500 mm,1950 mm, 2700 mm± 2%
Input voltageOutput power of laser source
3-phase 380 V ± 10% 50Hz3 kW - 10 kW
Stability of the power
Location accuracyRelocation accuracy
± 2%Diameter of laser beam
Model GS-HC3000
≥ ±0.02mm≥ ±0.01mm
Φ20 mm - Φ25 mm
4-station auto loading turn plateMax welding depth
0.9 sec/station5 mm
Min welding widthWelding speed
1 mm1.5 m/min - 3 m/min
External diameterInternal diameter
40 mm - 150 mm35 mm - 70 mm
ThicknessMax length of gear shaft
20 mm - 60 mm350 mm
Max diameter of gear shaft locationOutput power of laser source
40%300 W - 3000 W
Stability of the power
Laser headsRotate speed of prism
± 2%Spectrometer
Model GS-D1500P
4, 8, 12 (Optional)40000
Prism spectrometer
Number of prism surfaceHole distance
24, 36 ,48 (Optional)1 mm - 5 mm
Max. punching speedMax. linear speed
4.6 million holes/min450 m/min
Monthly outputIndex setting
18 T - 25 Tindependent, simple
Max. bobbin sizeBobbin width
Φ520 mm48 mm - 78 mm
Bobbin flatnessOriginal optical replacement cycle
± 0.3>3 years
Machine lifetimeOutput of laser source
>10 years200 W - 1500 W
Hole diameter
SpeedRow space adjustment range
Φ0.1 mm - Φ0.2 mmHole length
Model GS-DKJ02
0 - 200 m/min0 - 20 mm
Plastic wrap length
Hole space adjustment rangeRow
1 - 10 mm4 (can be set)
WidthHorizontal adjustment range
150 mm - 550 mm300 mm
Vertical adjustment rangePunching range
50 mm60 mm × 60 mm
Output power of laser source 55 W, 100 W, 200 W
GS-HC3000
GS-CQ25
GS-D1500P
GS-DKJ02 PLASTIC PUNCHINGMACHINE SERIES
TIPPING PAPER PUNCHINGMACHINE SERIES
CLADDING MACHINE SERIES
LASER WELDING MACHINE SERIES
Gear Laser welding Equipment
Laser Cladding Equipment
Laser Microporous Punching Machinefor Tipping Paper
Laser Microporous Punching Machinefor Preservative Packaging
OTHER PRODUCTS
IPG Fiber Laser Source