-Smart 2016 - abtehnic.roabtehnic.ro/wp-content/uploads/2017/01/Brandoni.pdf · Brandoni S.p.A....
Transcript of -Smart 2016 - abtehnic.roabtehnic.ro/wp-content/uploads/2017/01/Brandoni.pdf · Brandoni S.p.A....
1961-2011
Headquarters: via Novara 19928078 Romagnano Sesia (NO) ITALY
Ph. +39 0163 828111 Fax +39 0163 [email protected] www.brandoni.it
Spain: ACUAFLOW VALVES S.L.www.acuaflowvalves.es
01/2
016
EN For 50 years
we have been in love
with valves
In 1985, the company diversifies its
activities and becomes the first producer
of flanged ball valves in cast iron, with
extremely innovative characteristics.
Until the 90s, the growth of the company
was driven mainly by a successful
technical approach:
• The construction and production of
valves according to the strict European
standards and norms
• Substantial investments in technology
to achieve high automation levels in
production.
1995: A turning point, the company
becomes Brandoni SpA and evolves from
a product-related strategy to a marketo-
riented
strategy in response to the
requirements of the new global market.
Founded in 1961 by Gian Renzo and Pier
Francesco Brandoni, the company Fratelli
Brandoni produces components for the
electromechanical industry supplying
companies such as Pirelli, 3 M and CEAT.
In the same year, Brandoni SpA is one of the first
companies in the Valsesia district to obtain the
ISO 9002 quality certification, which recently beca-
me UNI EN ISO 9001 – version 2008.
Our companykeeping up with a changing world
TODAY, innovation is the keyword and the driving
force that governs Brandoni’s activities, with
investments in research and development,
as well as in renewable energies, and purchasing of
machinery with state-of-the-art technology,
the training of human resources and enhancing
customer service.
These commitments enable developing new solu-
tions to enlarge the range and improve our perfor-
mance.
During 2004, ACUAFLOW VALVES S.L. is founded in Madrid to serve the
Spanish market with products related to the water cycle.
2007: In order to enhance service to the fast developing East-European
area, Brandoni adheres to the HIDROTECH consortium.
Brandoni S.p.A. Industrial valves has been one of the
first companies in the Valsesia area to obtain the
quality certification according to ISO 9002, recently
modified into UNI EN ISO 9001 – Version 2008.
All kinds of machinery for the production comply with
the most severe European norms with certification
of the products for approval DIN-DVGW for gas: EN
12729 and WRAS for backflow preventer and guide-
line97/23/CE(PED).
Brandoni also obtained the requested certifications
for the following countries: Sweden, Romania, Czech
Republic, Slovakia, Russia (GOST).
Certification
In order to choose the correct valve, for the most suitable solution, the catalogue gives the description, the certifications
available and the main application fields, indicated by an icon.
WATER CONDITIONING GAS HEATING DRINKING WATERINDUSTRY FIRE FIGHTINGMARINE
Legend
ISO 9001-2008 CertificationBrandoni S.p.A. - Italy
Certification GOST Hygienic Certification
CertificationEN 1717 - EN12729
Directive pressure equipment
97/23/CE PED
CertificationEN13774
CertificationUNI EN 1074-1:2001 - UNI EN 1074-2:2004
18
23
24
2515
19
22SHUT-OFF VALVES
Ball valves Series B1
Series B2.1 cast iron
Series B2.3/B2.7
P 40
Series 04
Series 01 - 02 inox
Series 03 - 04 inox
Butterfl y valves Series J9
Series L9
Soft seated gate Series 20.900 - 21.900
valves
Knife gate valves Series 18
Series 19
Series 23
CHECK VALVES
Check valves Series 05 (F5 - T5)
Series 05 + gaskets
Series W6
Series D6
Series Y6
Series 06-M6
Series 07 (F7 - T7)
Series S6
P 45-P48
Series M16
PROTECTION
Back flow Series ECO3F
preventers Series ECO3T
REGULATION
Balancing valves Series EKOFLUX TS
Series EKOFLUX S
Series EKOFLUX L
Series EKOFLUX D
Series EKOFLUX M
Series EKOFLUX PI
Regulation valves Series 12.000
Series 13.000
Series 14.000
Series 015
FILTRATION
Strainers Series 10.000
P44
Series 11.000
Series 11.000 M
Gaskets Series 50
JOINTS
Joints Series F8-T8
Series W8
SOLENOID VALVES
Solenoid valves Series 84
Series 86
Series 87
Coils Spare parts for Series 84-86-87
AUTOMATION
Actuators
ACCESSORIES
SALES CONDITIONS
P. 10/12
P. 12/13
P. 13
P. 14
P. 15/17
P. 18
P. 19/20
P. 20/21
P. 22
P. 23
P. 24
P. 25/26
P. 27/32
P. 33
Summary
10
10 www.brandoni.it
Series B1
Series B2.1
Body: cast iron EN GJL 250
B1.000 Ball and stem: brass CuZn40Pb2B1.010 Ball: AISI 304 - Stem: brass CuZn40Pb2B1.011 Ball and stem: AISI 304
Sizes: DN20÷100Coating: RAL 5002 colour
Wafer ball valve
For water max 100°
Body: ductile iron - O-Ring: NBR Body: Cast Iron - O-Ring NBR (only for DN 200 - 250)
For hot water max 150°C - Body: ductile iron - O-Ring: FKM
For GAS
B2.100 Ball and stem: brass CuZn40Pb2B2.110 Ball: AISI 304 - Stem: brass CuZn40Pb2B2.111 Ball and stem: AISI 304B2.121 Ball: AISI 316 - Stem: AISI 304
Sizes: DN15÷150Coating: RAL 5002 colour
B2.000 Ball and stem: brass CuZn40Pb2B2.010 Ball: AISI 304 - Stem: brass CuZn40Pb2B2.011 Ball and stem: AISI 304B2.021 Ball: AISI 316 - Stem: AISI 304
Sizes: DN200÷250Coating: RAL 5002 colour
B2.100 FKM Ball and stem: brass CuZn40Pb2B2.110 FKM Ball: AISI 304 - Stem: brass CuZn40Pb2B2.111 FKM Ball and stem: AISI 304B2.121 FKM Ball: AISI 316 - Stem: AISI 304
Sizes: DN15÷150Coating: RAL 5002 colour
B2.100 Gas Ball and stem: brass CuZn40Pb2B2.110 Gas Ball: AISI 304 - Stem: brass CuZn40Pb2B2.111 Gas Ball and stem: AISI 304B2.121 Gas Ball: AISI 316 - Stem: AISI 304
Sizes: DN15÷150Coating: RAL 5002 colour
Flanged ductile iron ball valve
Shut-off valves
Series B2.3
Face to Face ANSI 150 reduced bore R2.377 Ball and stem: aluminium/bronze
Sizes: DN50÷200
B2.300 Ball and stem: brass CuZn40Pb2B2.322 Ball and stem: AISI 316B2.377 Ball and stem: aluminium/bronze
Sizes: DN15÷250
Flanged bronze ball valve
Face to Face ANSI 150 full bore S2.300 Ball and stem: brass CuZn40Pb2S2.322 Ball and stem: AISI 316S2.377 Ball and stem: aluminium/bronze
Sizes: DN15÷150
* Most suitable for district heating - for water up to 150°C
www.brandoni.it 11
Series B2.7
Face to Face ANSI 150 reduced bore R2.777 Ball and stem: aluminium/bronze
Sizes: DN50÷200
B2.722 Ball and stem: AISI 316B2.777 Ball and stem: aluminium/bronze
Sizes: DN15÷250
Flanged aluminium/bronze ball valve
Shut-off valves
Face to Face ANSI 150 full bore S2.722 Ball and stem: AISI 316S2.777 Ball and stem: aluminium/bronze
Sizes: DN15÷150
Series 04.1 Three-Way fl anged cast iron ball valve
T4.100 Ball and stem: brass CuZn40Pb2T4.111 Ball and stem: AISI 304Y4.100 Ball and stem: brass CuZn40Pb2Y4.111 Ball and stem: AISI 304
Sizes: DN50÷150Coating: RAL 5002 colour
T4 Y4
Series 01-02 inox Steel fl anged ball valve
01.411 PN16/PN 40 WAFER - Body: A 105 - Ball: AISI 304 - Stem: AISI 316
Sizes: DN15÷150
01.622 WAFER - Body - Ball - Stem: AISI 316
Sizes: DN15÷100
02.622 Body and ball: AISI 316 - Stem: AISI 304
Sizes: DN15÷150
Most suitable for district heating - for water up to 150°C
Series P40 Bronze globe valve
P40.306 Seat: metalP40.303 Seat: PTFEP40A.306 Seat: metal - screwed non retourn typeP40A.303 Seat: PTFE - screwed non retourn typeP40S.306 Seat: metal - with needle disc
Sizes: DN15÷100
Body: Bronze
NEW
12 www.brandoni.it
Shut-off valvesSeries 03-04 inox AISI 316 F/F threaded end ball valve
A3.622 BSP Reduced bore - Cylindrical thread
Sizes: 1/4”÷2”
B3.622 BSP Full bore - 2 pieces - Cylindrical threadB3.622 BSP ISO 5211 Full bore - 2 pieces - Cylindrical thread - With ISO 5211 fl ange
Sizes: 1/4”÷4”
T4.622 BSP T port - Cylindrical threadL4.622 BSP L port - Cylindrical thread
Sizes: 1/4”÷2”
C3.622 BSP Full bore - 3 pieces - Cylindrical thread
Sizes: 1/4”÷4”
B3.622 BSP B3.622with ISO fl ange
Series J9 Wafer butterfl y valve
Body: ductile iron EN GJS 400 -15 J9.100 Disc: EN GJS 400 nickel plated - Liner: EPDMJ9.101 Disc: EN GJS 400 nickel plated - Liner: NBR (for Gas with yellow lever)J9.102 Disc: EN GJS 400 nickel plated - Liner: FKM - DN50÷400 J9.110 Disc: AISI 304 - Liner: EPDMJ9.120 Disc: AISI 316 - Liner: EPDMJ9.121 Disc: AISI 316 - Liner: NBR (for Gas with yellow lever)J9.122 Disc: AISI 316 - Liner: FKM - DN50÷400J9.123 Disc: AISI 316 - Liner: PTFE - DN50÷400J9.128 Disc: AISI 316 - Liner: EPDM (for drinking water)J9.170 Disc: aluminium/bronze- Liner: EPDM - DN40÷200JJ9.171 Disc: aluminium/bronze- Liner: NBR - DN40÷200J9.172 Disc: aluminium/bronze- Liner: FKM - DN50÷200J9.173 Disc: aluminium/bronze- Liner: PTFE - DN50÷200
Sizes: DN25÷600DN300÷600 with Gear boxCoating: RAL 5002 colour
J9 J9 Gas
*
*
* NB: only the version with ISO 5211 flange is suitable for gas
*
*
* NB: GAS version with yellow lever NB: EPDM liner version*
*
*
www.brandoni.it 13
T4.622 BSP T port - Cylindrical threadL4.622 BSP L port - Cylindrical thread
Sizes: 1/4”÷2”
Shut-off valves
J9.620 Disc: AISI 316 - Liner: EPDMJ9.621 Disc: AISI 316 - Liner: NBRJ9.622 Disc: AISI 316 - Liner: FKMJ9.623 Disc: AISI 316 - Liner: PTFE (DN125÷300 - Gear box included)J9.670 Disc: aluminium/bronze - Liner: EPDMJ9.673 Disc: aluminium/bronze - Liner: PTFE
Sizes: DN40÷250
Body: AISI 316
J9.620 J9.670
Series L9 LUG butterfly valve
Body: ductile iron EN GJS 400 -15 L9.100 Disc: EN GJS 400 nickel plated - Liner: EPDML9.101 Disc: EN GJS 400 nickel plated - Liner: NBR (for Gas with yellow lever)L9.102 Disc: EN GJS 400 nickel plated - Liner: FKM - DN50÷400 L9.110 Disc: AISI 304 - Liner: EPDML9.120 Disc: AISI 316 - Liner: EPDML9.121 Disc: AISI 316 - Liner: NBR (for Gas with yellow lever)L9.122 Disc: AISI 316 - Liner: FKM - DN50÷400L9.123 Disc: AISI 316 - Liner: PTFE - DN50÷400L9.128 Disc: AISI 316 - Liner: EPDM (for drinking water)L9.170 Disc: aluminium/bronze- Liner: EPDM - DN40÷200L9.171 Disc: aluminium/bronze- Liner: NBR - DN40÷200L9.172 Disc: aluminium/bronze- Liner: FKM - DN50÷200L9.173 Disc: aluminium/bronze- Liner: PTFE - DN50÷200
Sizes: DN25÷600DN300÷600 with Gear boxCoating: RAL 5002 colour
L9 L9 Gas
Series 20.900 - 21.900 Soft seated gate valve
Flat body PN 16 20.900 Body: ductile iron EN GJS 500 - Soft seat: EN GJS 400-15+EPDM - Stem: AISI 42020.901 Body: ductile iron EN GJS 500 - Soft seat: EN GJS 400-15+NBR - Stem: AISI 420
Sizes: DN40÷350Coating: RAL 5005 colour
Oval body PN 16 21.900 Body: ductile iron EN GJS 500 - Soft seat: EN GJS 400-15+EPDM - Stem: AISI 420
Sizes: DN40÷250Coating: RAL 5005 colour
*
*
* NB: GAS version with yellow lever
* NB: Flat body version
*
*
*
*
*
*
14 www.brandoni.it
Shut-off valvesSeries 18
Body: cast iron EN GJS 250
18.000 Gate: AISI 316 - Seal: butyl18.001 Gate: AISI 316 - Seal: NBR18.009 Gate: AISI 316 - Seal: EPDM
Sizes: DN50÷600Coating: RAL 5017 colour
Bidirectional knife gate valve
18.600 Gate: AISI 316 - Seal: butyl18.601 Gate: AISI 316 - Seal: NBR18.602 Gate: AISI 316 - Seal: FKM18.603 Gate: AISI 316 - Seal: PTFE18.609 Gate: AISI 316 - Seal: EPDM
Available with AISI 316 columns.
Sizes: DN50÷600 excluded DN 450
Body: AISI 316
Series 19
Body: cast iron EN GJS 250
19.000 Gate: AISI 316 - Seal: butyl19.001 Gate: AISI 316 - Seal: NBR19.006 Gate: AISI 316 - Seal: metal/metal19.009 Gate: AISI 316 - Seal: EPDM
Sizes: DN50÷600Coating: RAL 5017 colour
Unidirectional knife gate valve
19.600 Gate: AISI 316 - Seal: butyl19.601 Gate: AISI 316 - Seal: NBR19.602 Gate: AISI 316 - Seal: FKM19.603 Gate: AISI 316 - Seal: PTFE19.606 Gate: AISI 316 - Seal: metal/metal19.609 Gate: AISI 316 - Seal: EPDM
Available with AISI 316 columns.
Sizes: DN50÷600 excluded DN 450
Body: AISI 316
Series 23
Body: cast iron EN GJS 250
23.000 Gate: AISI 316 - Seal: butyl23.001 Gate: AISI 316 - Seal: NBR23.006 Gate: AISI 316 - Seal: metal/metal23.009 Gate: AISI 316 - Seal: EPDM
Sizes: DN50÷600Coating: RAL 5017 colour
Through blade knife gate valve bidirectional
Series 23.6
Available with AISI 316 columns.
Sizes: DN50÷600 excluded DN 450
Body: AISI 316
www.brandoni.it 15
Check valvesSeries 05
F5.000 Seal: NBRTrim material DN 50-100: brassTrim material DN 125-250: EN GJS 250F5.020 Seal: NBR - Trim material: AISI 316F5.002 Seal: FKMTrim material DN 50-100: brassTrim material DN 125-250: EN GJS 250F5.022 Seal: FKM - Trim material: AISI 316F5.028 Seal: silicon - Trim material: AISI 316
Sizes: DN40÷250Coating: RAL 5002 colour
Cast iron spring check valve
T5.000 Seal: NBR - Trim material: brassT5.002 Seal: FKM - Trim material: brass
Sizes: 2”÷4”Coating: RAL 5002 colour
F5.000+50 Foot valve with galvanized steel strainerF5.020+52 Foot valve with AISI 304 strainerF5.020+53 Foot valve with AISI 316 strainer
Sizes: DN40÷250Coating: RAL 5002 colour
Foot valve
T5.000+51 Threaded foot valve with AISI 304 strainer
Sizes: 2”÷4”Coating: RAL 5002 colour
Body: EN GJL 250 - PN 16
Body: EN GJL 250 F/F threaded end - PN 16
Series W6Seal: NBR
Seal: metal/metal - for temperature up to + 350°
W6.020 Body: EN GJS 250 - Disc: AISI 316 - Seal: NBR
Sizes: DN32÷150Coating: RAL 5002 colour
Disc wafer spring check valve
W6.626 Body e Disc: CF8M - Seal: metal-metal
Sizes: DN15÷150
16 www.brandoni.it
Check valvesSeries D6
Series Y6
Body: cast iron EN GJL 250
Body: ASTM A351 gr. CF8M
D6.021 Shutter: stainless steel - Seal: EPDMD6.031 Shutter: EN GJS 400-15 - Seal: EPDMD6.071 Shutter: aluminium/bronze - Seal: EPDM
Sizes: DN40÷600Coating: RAL 5002 colour
Y6.623 Threaded F/F end - Body: AISI 316 - Seal: PTFE
Sizes: 1/4”÷2”
D6.622 Shutter: ASTM A351 gr. CF8M - Seal: FKMD6.672 Shutter: aluminium/bronze - Seal: FKM
Sizes: DN40÷600
Dual-plate wafer check valve
Y check valve with spring
Series 06-M6Body: carbon steel
Body: AISI 316
06.430 Without spring - O-Ring: NBR06.432 Without spring - O-Ring: FKM06.433 Without spring - O-Ring: PTFE
Sizes: DN32÷400
M6.430 With spring - O-Ring: NBRM6.432 With spring - O-Ring: FKMM6.433 With spring - O-Ring: PTFE
Sizes: DN32÷250
06.620 Without spring - O-Ring: NBR06.622 Without spring - O-Ring: FKM06.623 Without spring - O-Ring: PTFE
Sizes: DN32÷400
M6.620 With spring - O-Ring: NBRM6.622 With spring - O-Ring: FKMM6.623 With spring - O-Ring: PTFE
Sizes: DN32÷250
Swing wafer check valve
06.4 M6.4 without spring with spring
06.6 M6.6 without spring with spring
www.brandoni.it 17
Check valvesSeries 07
F7.100 PN 10 fl anged - Body: ductile iron EN GJS 400 - Ball: NBR coating
Sizes: DN50÷500Coating: RAL 5002 colour
T7.100 Threaded F/F end - Body: ductile iron EN GJS 400 - Ball: NBR coating
Sizes: 1”÷3”Coating: RAL 5002 colour
Ball check valve with inspection cover for access
Series S6
Series M16
Body: cast iron EN GJL 250
S6.000 DN40 ÷ DN400: Shutter: EN GJS 400 - Seal: EPDM - PN16 DN500 ÷ DN800: Shutter: EN GJS 500.7 - Seal: EPDM - PN10
Sizes: DN40÷800
Body: ductile iron EN GJS 500-7
S6.100 Shutter: EN GJS 500.7 - Seal: EPDM - PN16
Sizes: DN40÷800
M16 Body: cast iron EN GJL 250 - Shutter: AISI 304 Guide: (DN40 - DN100) brass CuZn40Pb2 Guide: (DN125 - DN200) EN GJL 250
Sizes: DN40÷600
Flanged swing check valve
“Venturi” check valve
Series P45
P45.306 Seat: metalP45.303 Seat: PTFE
Sizes: DN15÷100
Bronze check valves
Body: bronze
Series P48
P48.306 Seat: metalP48.300 Seat: NBR
Sizes: DN15÷100
Bronze swing check valve
Body: bronze
NEW
NEW
18 www.brandoni.it
Series ECO3F
ECO 3F Body: EN GJS 250ECO 3F Unit Composed of: 2 shut-off valves + 1 Y strainer + 1 backfl ow preventer
Sizes: DN65÷150Coating: RAL 5002 colour
Flanged back flow preventer with controllable reduced pressure zone
ECO 3F Unit
Protection
Series ECO3T
ECO 3T 015 Body: brass CuZn40Pb2 - * 3/4” not approved according to EN12729ECO 3T 020-050 Body: bronzeECO 3T Unit Composed of: 2 ball valves + 1 Y strainer + 1 backfl ow preventer
Sizes: 1/2”÷2”
Threaded end back fl ow preventer with controllable reduced pressure zone
ECO 3T 015 ECO 3T 20-50
ECO 3T Gruppo
Only for DN 15
www.brandoni.it 19
ECO 3F Body: EN GJS 250ECO 3F Unit Composed of: 2 shut-off valves + 1 Y strainer + 1 backfl ow preventer
Sizes: DN65÷150Coating: RAL 5002 colour
RegulationSeries Ekoflux TS Variable orifice threaded balancing valve
EKOFLUX TS Variable orifice balancing valve - Body: brass HPb57-3 - Seal: PTFE
Sizes: 3/4”÷2”
Series Ekoflux S Flanged balancing valve
EKOFLUX S Variable orifice balancing valve - Body: EN GJL 250 - Seal: EPDM
Sizes: DN50÷300Coating: RAL 5002 colour
EKOFLUX: Improves environmental comfort as well as optimizes energy consumption.Ekoflux balances the flow in main circuits or in single sections of heating or conditioning plants. Effects shut-off and measuring functions. The continuous pre-setting function allows the exact control of the loss of pressure and of the flow rate.
Ekoflux S DN50
EKOFLUX L Shut-off and regulation flanged valve Body: EN GJL 250 Seal: EPDM
Sizes: DN50÷150Coating: RAL 5002 colour
NEW
Series Ekoflux L Shut-off and regulation flanged valve
Ekoflux L DN50
Only for DN 15
20 www.brandoni.it
Regulation
EKOFLUX D Modulating differential pressure control valve DPCV Body: EN GJL 250 - aluminium - Seal: EPDM
Sizes: DN65÷150Coating: RAL 5002 colour
NEW
Series Ekoflux D Modulating differential pressure control valve DPCV
EKOFLUX M Modulating differential pressure control valve DPCV - flow rate measuring and shut- off Body: EN GJL 250 - aluminium - Seal: EPDM
Sizes: DN65÷150Coating: RAL 5002 colour
PaTEnTED
NEW
Series Ekoflux M Modulating differential pressure control valve DPCV
Series Ekoflux PI Pressure independent control valve PICV
EKOFLUX PI Pressure independent control valve PICV Body: EN GJL 250 - Seal: EPDM
Sizes: DN65÷150Coating: RAL 5002 colour
NEW
www.brandoni.it 21
Series 13.00013.000 Body: EN GJS 400 or welded steel - Epoxy powder coated - PN 25-40 DN50 - DN150: PN 40 DN50 - DN300: PN 25
Sizes: DN50÷800Coating: RAL 5005 colour
Piston control valve
Body: brass - Seal: NBR (1/2” - 2” 1/2) FKM (3”- 4”) Body: nickel plated brass - Seal: NBR (1/2” - 2” 1/2) FKM (3”- 4”)
Series 14
14.000 Body: ductile iron EN GJS 400 or welded steel - Epoxy powder coated PN 10/16/25/40/64All sizes are supplied with gear box
Sizes: DN80÷1400Coating: RAL 5005 colour
T15A.2G0 PN15 – P. Out 1 - 4 bar - Seat: brass Sizes: 3/8”÷3/4” T15B.2G0 PN15 – P. Out 1 - 4 bar with gauge connection - Seat: brass Sizes: 3/8”÷3/4”T15C.2G0 PN25 – P. Out 0,5 - 6 bar with 2 gauge connections - Seat: AISISizes: 1/2”÷4”
T15A.2N0 PN15 – P. Out 1 - 4 bar - Seat: brassSizes: 3/8”÷3/4”T15B.2N0 PN15 – P. Out 1 - 4 bar with gauge connection - Seat: brassSizes: 3/8”÷3/4” T15C.2N0 PN25 – P. Out 0,5 - 6 bar with 2 gauge connections - Seat: AISISizes: 3/8”÷3/4”
Needle valve
Series T15 Brass direct acting, pressure reducing valve, with piston, F.F. threaded end
T15A T15B T15C
Series F15
F15 Body: ductile iron EN GJS 400 - Epoxy powder coated - Seal: NBR
Sizes: DN50÷150
Flanged direct acting, pressure reducing valves with piston
Series 12.000
Body: ductile iron EN GJS 400 or welded steel12.100 Pressure reducing and stabilizer valve12.120 Pressure reducing and sustaining valve12.200 Pressure sustaining or pressure relief valve12.219 Pressure relief valve with anticipated opening12.300A Right-angle pressure relief valve12.400 Flow rate control valve12.410 Flow rate control and downstream pressure reducing and stabilizing valve12.460 Flow rate control and float controlled min/max level12.500 Float control modulating valve - constant level tank fill12.520 Float control modulating valve with pressure sustaining upstream - constant level tank fill12.600 Float controlled min/max level12.620 Float controlled min/max level with pressure sustaining upstream12.800 Altitude control valve12.900 Exceeding fl ow rate control valve
Sizes: DN50÷800Coating: RAL 5005 colour
Diaphragm control valve
22 www.brandoni.it
Filtration
50.000 Strainer basket - PN 10/16 fl ange - Body: galvanized steel52.000 Strainer basket - PN 10/16 fl ange - Body: AISI 30453.000 Strainer basket - PN 10/16 fl ange - Body: AISI 316
Sizes: DN40÷400
51.000 Strainer basket - Threaded connection - Body: AISI 304 with nylon joint
Sizes: DN2”÷4”
Series 10.000
Series 11.000
Series 50
10.000 Threaded end F/F - Body: AISI 316
Sizes: 1/4”÷2”
11.000 Flanged strainer PN 16 - Body: EN GJS 250
Sizes: DN40÷400Coating: RAL 5002 colour
Threaded Y strainer with drain
Flanged Y strainer with drain
Strainer basket
Series 11.000 M
11.000 M Flanged strainer with magnet PN 16 - Body: EN GJS 250
Sizes: DN40÷150Coating: RAL 5002 colour
Flanged Y strainer with Magnet
Series P44
P44.300 Flanged - Body: bronze
Sizes: DN15÷100
Bronze flanged Y strainer
NEW
www.brandoni.it 23
F8 KIT
Series F8
Series T8
Series W8
PN10/16 fl anged rubber expansion joint
Threaded end F/F, rubber expansion joint
Wafer vibration-damping rubber expansion joint
F8.500 Body: EPDM - Flange: galvanized carbon steelF8.520 Body: EPDM - Flange: AISI 316F8.100 Body: NBR - Flange: galvanized carbon steelF8.120 Body: NBR - Flange: AISI 316
F8.KIT Control rod unit: galvanized carbon steel
Sizes: DN32÷600
T8.500 Body: EPDM - Pipe union: galvanized malleable ironT8.510 Body: EPDM - Pipe union: AISI 304T8.100 Body: NBR - Pipe union: galvanized malleable ironT8.110 Body: NBR - Pipe union: AISI 304
Sizes: 3/4”÷3”
W8.500 Body: EPDM - For fl anges PN 6/10
Sizes: DN20÷200
Joints
24 www.brandoni.it
Solenoid valvesSeries 84
Series 86
Series 87
NC solenoid valve - Mixed action - Seal: FKM
Sizes: 3/8”÷2”
NC solenoid valve - Seal: NBR
Sizes: 3/8”÷2”
N.O. solenoid valve - Seal: NBR
Sizes: 3/8”÷2”
Coils are available for electric power supply: 23 V AC - 100V AC- 24V AC - 24V DC
Sizes: 3/8”÷2”
Solenoid valve, servo actuated
Solenoid valve, pilot operated
Solenoid valve, pilot operated
Spare coils for series 84 – 86 – 87 ( refer also to spare parts section )
www.brandoni.it 25
AutomationSeries AP
Series AP
Series APT
Series APP
Pneumatic actuator in anodized aluminium
Pneumatic actuator in anodized aluminium
Pneumatic actuator in technopolymer
Pneumatic actuator in polypropylene
D.A. Double actingS.A. Single acting
Approved ATEX II 2GD
Approved ATEX II 2GD
Series AOX Electric actuators
220V 50-60 Hz IP 67380V 50-60 Hz IP 67 24V DC- IP 67 24VAC 50-60 Hz IP 67
D.A. Double actingS.A. Single acting
D.A. Double actingS.A. Single acting
D.A. Double actingS.A. Single acting
26 www.brandoni.it
Automation
ISO 5211 Bracket - ISO 5211 Coupling - Square reducer
Namur solenoid valve
Positioner
Actuator mounting kit according to ISO 5211
Limit switch box for pneumatic actuator
www.brandoni.it 27
Series B1 - B2.1 - B2.3/7
Square cap for water main system connection
Sizes: DN40÷150
Stem extension for water main system connection
Sizes: DN15÷250 for B2 DN40÷250 for B1
KIT ISO 5211 Flange
Sizes: DN15÷200
Limit switches kit with ON/OFF indicator
Sizes: DN15÷150 for B2 DN40÷150 for B1
Stem extension for thermal insulation
Sizes: DN25÷150
Lockable operation lever - without lock
Sizes: DN15÷250
Gear boxSizes: DN20÷250 Chain driver kit (4 m)Sizes: DN20÷250
Accessories
Accessories
28 www.brandoni.it
AccessoriesSeries 04.1
Series J9 - L9
Lever with extension for thermal insulation
Sizes: DN50÷150
ISO 5211 bracket and coupling
Sizes: DN50÷150
IP67 limit switches kit
Sizes: DN25÷400
Stem extension for water main system connection
Sizes: DN25÷400
Accessories
Accessories
Gear boxSizes: DN25÷600
IP67 limit switch box for gear box
Sizes: DN25÷400
Position indicator and padlocking for gear box
Sizes: DN25÷400
Chain driver (4 m)
Sizes: DN15÷400
www.brandoni.it 29
AccessoriesSeries 20.900 - 21.900
Square cap for water main system connection
Sizes: DN40÷300
Kit Flangia ISO 5210
Sizes: DN40÷300
Position indicator
Sizes: DN40÷300
Stem extensionProtective tube
Sizes: DN40÷300
Accessories
Series 18 - 19 - 23
Mechanical limit switches
Sizes: DN50÷600
V - port gate
Sizes: DN50÷450
Accessories
30 www.brandoni.it
Accessories
Series 18 - 19 - 23 Accessories
Gear box - Sizes: DN80÷600
Solenoid valve for pneumatic actuator - Sizes: DN50÷600It’s the same for all the DN
Square cap
Sizes: DN50÷600
Hand-protection for pneumatic actuator - for Series 19/23
Sizes: DN50÷600
Scraper for 18 serie
Sizes: DN50÷600
Chain driver
Sizes: DN50÷600
Conical defl ector for 19 end 23 series
Sizes: DN50÷600
www.brandoni.it 31
Accessories
Series 05
Pressure gauge and drain plugs
Strainer basket
Accessories
50.000 Strainer basket - PN 10/16 fl ange - Body: galvanized steel52.000 Strainer basket - PN 10/16 fl ange - Body: AISI 30453.000 Strainer basket - PN 10/16 fl ange - Body: AISI 316
Sizes: DN40÷400
51.000 Strainer basket - Threaded connection - Body: AISI 304 with nylon joint
Sizes: 2”÷4”
1/4” brass plugs and 1/4” minivalve M/F
Series EKOFLUX Accessories
Series ECO3 Accessories
ECO 3 TEST Control Instrumentation for BA type controllable reduced pressure zone
Electronic instrument for the measurement of the differential pressure/fl ow rate and thebalancing of the circuit.
PPA1 Pressure gauge probe adaptor. ¼” F brass body and stainless steel probe.
32 www.brandoni.it
Accessories
Série 12.000 - 13.000
Pressure gauge
Position indicator
V-Port
Spring
Accessories
Orifice plate for Ekoflux.S
Complete kit Tee 1/4MFF fitting, 1/4M-1/8F adapter, compression fitting 1/8M, copper capillary pipe diam. 4mm 2m length, 1/4M test plug.
Fitting and capillary kitCompression fitting 1/8M, copper capillary pipe diam. 4mm 2m length.
Fittings, adapter and test plug kitTee 1/4MFF fitting, 1/4M-1/8F adapter, compression fitting 1/8M, 1/4M test plug.
Test plug
www.brandoni.it 33
Sales conditions
1. Minimum amount For orders up to € 1.000,00 handling charges of € 50,00 will be considered. The minimum order value is € 500,00.
2. Packaging 1% on order volume for standard packing in boxes /pallets, depending on weight and destination of the goods.
3. Declarations of conformity Declaration of conformity, certifi cates EN 10204-2.1 and 2.2 - € 10,00 each. Certificate EN 10204-3.1 has to be required while ordering - € 30,00 each.
4. Prices refer to the current pricelist at the moment of the order, variations to prices indicated in the pricelist may be applied at any time without prior notice.
5. All kinds of delay authorizes the customer to cancel the order but not to claim for any compensation nor to delay payments of prior consignments.
6. Unless stated otherwise by written agreement, the delivery of the goods is FCA - Brandoni SpA - Via Novara 199 - I-28078 Romagnano Sesia (NO) - incoterm 2010 - and are shipped at purchaser’s risk and danger, even when they are on delivery and the freight cost is charged to the client. The goods shipped are not covered by any form of transport insurance or insurance policy. The supplier denies liability for any damage, failure, tampering or loss after the exit of the goods from the warehouse. For any complaint or claims deriving from, or tied to, shipping and/or complementary and/or supplementary operations, the purchaser has to address exclusively to the forwarder/shipping company or to third party responsible.
7. The warranty for manufacturing defects is two years after the shipment of the goods. The warranty is applicable only in case the verifi ed defect is noticed within 8 days to the manufacturer. Substitution of the claimed goods is free of charge in case manufacturing defect has been crosschecked. Brandoni SpA denies any eventually additional cost relative to damages, interest rates or compensation requirements.
8. All payments have to be effected to Brandoni SpA – registered offi ce. Exceeding the date of maturity, Brandoni has the right to collect the entire amount without further delay adding late charges considering the current bank rates. Furthermore, this might authorize Brandoni SpA to suspend pending orders.
9. For the installation of our products, the instructions and norms of use reported in our technical documentation
10. Disputes 1. If the contracting Party has its legal seat in Italy or in a country belonging to the European Community (except for Denmark) any dispute will be settled by friendly negotiation, according to Italian D.lgs n. 28/2010, through the Adr Aequitas body and following its rules. Should the friendly attempt for settlement fail, the competent court shall be exclusively the Tribunal of Novara - Italy.
2. If the contracting Party has its legal seat in Denmark or in a Country not belonging to the European Community, any dispute arising out of or related to the present contract shall be settled by arbitration under the Rules of the Milan Chamber of Arbitration, by a Sole Arbitrator appointed in accordance with the Rules. Seat of Arbitration shall be Milan (Italy), language of arbitration shall be English.
11. The present general sales conditions substitutes and cancel any prior issue of the same.
12. Brandoni SpA grants a two years warranty against manufacturing defects. The warranty is valid only for adequately stocked and handled products according to the indication in our technical documentation. Warranty will not be valid for modifi ed or dismantled/disassembled products.
13. The return of goods must be previously agreed with our Quality Department. The customer will be charged for freight cost and 10% of the value covering handling fees.
14. In case technical assistance out of the warranty period is required, please refer to technical department.
NOTA DELIVERY TIME IS CALCULATED IN WORKING DAYS AFTER RECEIPT OF THE ORDER AND DOES NOT CONSIDER TRANSIT TIMES.
Brandoni SpA reserves the right to make changes in design and/or construction of the products at any time without prior notice. The present
pricelist revokes any previous one. For further information, please refer to www.brandoni.it
Mod
. 056
V-Port
Spring
Headquarters: via Novara 19928078 Romagnano Sesia (NO) ITALY
Ph. +39 0163 828111 Fax +39 [email protected] www.brandoni.it
Spain: ACUAFLOW VALVES S.L.www.acuaflowvalves.es