■ Instruction Manual Thank you for purchasing this product. You are requested to use right,...
-
Upload
gavin-sullivan -
Category
Documents
-
view
213 -
download
0
Transcript of ■ Instruction Manual Thank you for purchasing this product. You are requested to use right,...
-
This sensor is a Microwave automatic door sensor applied Doppler radar principle. Please supply a voltage of AC/DC 9V ~ AC/DC 24V. It is possible to use in any circumstances and has few wrong operation. (It is reliable as it's not detected by shaking any paper or newspaper.) The detecting method is able to be setting as 4 level. When forward, it is setting as following : Sensitivity Level 2.
DNA-200S (Accessories)
1. 2 screws for fixing.2. A flexible cord with length of 1.5m. 3. A instruction manual.4. A Installation Paper.
SpecificationTypeSpecificationTypePOWER SUPPLY AC/DC 9V ~ AC/DC24V POWER CONSUMTION : STANDBY / OPERATION 200mW@9V / 550mW@9VMAINS FREQUENCY50 ~ 60Hz FREQUENCY10.525GHz etc.RELATIVE HUMIDITY0 ~ 95 % FUNCTION INDICATION LED MOUNTING STYLEWALLTIME DELAY/hold TIMEREAL TIME / 0.5 SECMOUNTING HEIGHT2.0M ~ 2.50MRANGE (Level 1 ~ Level 4)0.0M 1.6MDIMENTION(W*H*D)140 * 63 * 43mmOPERATING TEMP- 25'C ~ +60'CWEIGHT120g DETECTION ANGLE40' ~ 160'COVER COLORSILVER or BLACK
-
Step 4 : please connect a wire of the body of sensor and a wire of automatic door system. The yellow wire is for output, gray is for power. The wire for power has not polarity(+,-).
Step 5 : please set in moderation according to circumstances as below setting method. Step 6 : please fasten the connected wire on the body and unite the cover with body.
Please set right for general operation of this product. All settings are adjusted by the DIP Switch. * Setting method of the sensitivity and detecting distance.
* A sensing distance can have some difference(+/- 20cm) according to a moving object. Dnet Co.,Ltd. Homepage : www.dno.co.kr E-Mail : [email protected] Tel:82-53-584-3545,3544 Fax:82-53-584-6423 Yellow(COM) Yellow(N/O) Grey (AC/DC) Grey(AC/DC)