© 2011 Autodesk Revit to Fabrication with Inventor Harlan Brumm Product Support Technical Lead Bob...
-
Upload
gary-oneal -
Category
Documents
-
view
221 -
download
0
Transcript of © 2011 Autodesk Revit to Fabrication with Inventor Harlan Brumm Product Support Technical Lead Bob...
© 2011 Autodesk
Revit to Fabrication with Inventor
Harlan BrummProduct Support Technical Lead
Bob Van der DonckProduct Support Technical Lead
© 2011 Autodesk
What do you use the most for your work?Are you an Expert?
© 2011 Autodesk
Starting with Revit
© 2011 Autodesk
Moving to Inventor…
© 2011 Autodesk
Importing Revit models into Inventor
Either via SAT or DWG file format Import Wizards
Undo file considerations File names Import as assembly Units
Unique to DWG Preview capability Selective import Use of configuration file
SAT import dialog DWG import dialog
© 2011 Autodesk
Importing Revit models into Inventor
Import limitations Size of Revit objects Downstream operations could suffer Solve by resizing or moving geometry
© 2011 Autodesk
Importing Revit models into Inventor
Import results Solid objects Flat assembly structure Part colors maintained No material information
Assign materials via BOM Or …
© 2011 Autodesk
Go Green
© 2011 Autodesk
Go Green
Assign materials via Eco Materials Adviser Explore different manufacturing processes Base version has limited scope
max. 20 parts and max 53 materials Upgrade path to full version without limitations
© 2011 Autodesk
Fabrication methods covered by Autodesk products
© 2011 Autodesk
Fabrication methods covered by Autodesk products
Sheet metal (un)folding Welding Punching* Nesting* Progressive die* Laser cutting* Milling* Turning/Lathe* Casting* Injection Molding (Inventor Tooling + Moldflow) Assembly techniques (Bolted connections/Rivets) BOM and costing
© 2011 Autodesk
Sheet metal fabrication (duct work)
© 2011 Autodesk
Sheet metal fabrication (duct work)
Import errors Only happens on curved DWG geometry Prevents boolean operations Use Repair functionality
© 2011 Autodesk
Partial reuse of Revit geometry Unfolding/refolding Bench press or die formed shapes Punch and bend line annotations Sheet metal extents (raw material cost) Use of Content Center
Sheet metal fasteners Rivets/Bolted connection
Sheet metal fabrication (duct work)
© 2011 Autodesk
Round-tripping
© 2011 Autodesk
Round Tripping
Revit Inventor Revit Benefits
More detail in design Additional components Additional connectors
© 2011 Autodesk
Stairs and Modular construction
© 2011 Autodesk
Stairs and Modular construction
Patterning Weldments
Regular welds Cosmetic welds
© 2011 Autodesk
Stairs and Modular construction
Upfront work pays off later Add weld area in cosmetic weld
Precise mass properties/cost Create weld symbols upfront
Recover in drawing
© 2011 Autodesk
Steel construction
© 2011 Autodesk
Steel construction
Default import results Browser names
Bland (generic) names
BOM No length information No grouping
All beams QTY =1 No preview
© 2011 Autodesk
Steel construction
After running macro Browser names
Part number = width x height x length Length = Longest dimension +/- in part number indicates approximations
BOM Info on length Group beams with identical section Preview bitmap
© 2011 Autodesk
Fill out your surveys
#RevitFabInventorThanks!
© 2011 Autodesk
Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2011 Autodesk, Inc. All rights reserved.