Post harvest Processing of Banana - Opportunities and Challenges
Current Trends in Drying & Dehydration of Foods
Absorption of steam and water at ambient temperature in wood polymer composites prepared from agro-waste and Novolac
Absorption of water at ambient temperature and steam in wood–polymer composites prepared from agrowaste and polystyrene
Studies on dynamic and static crosslinking of ethylene vinyl acetate and ethylene propylene diene tercopolymer blends
Effect of Polyacrylic Acid as Antiscaling Agent on Heat Exchangers
Studies on swelling properties of wood/polymer composites based on agro-waste and novolac
Kinetics of glycolysis of poly(ethylene terephthalate) waste powder at moderate pressure and temperature
Kinetics and thermodynamics of hydrolytic depolymerization of poly(ethylene terephthalate) at high pressure and temperature
Effect of nano-Mg(OH)2 on the mechanical and flame-retarding properties of polypropylene composites
Mechanical and flame-retarding properties of styrene–butadiene rubber filled with nano-CaCO3 as a filler and linseed oil as an extender
Comparative study of the mechanical and flame-retarding properties of polybutadiene rubber filled with nanoparticles and fly ash
Effect of nanosize CaSO4 and Ca3(PO4)2 particles on the rheological behavior of polypropylene and its simulation with a mathematical model
Effect of compatibilizers on water absorption kinetics of polypropylene/wood flour foamed composites
ChemInform Abstract: Synthesis of 5-Arylidene-2-aryl-3- (phenothiazino/benzotriazoloacetamidyl)-1,3-thiazolidine-4-ones (IX) as Antiinflammatory, Anticonvulsant, Analgesic and Antimicrobial
Analysis of solute transport with a hyperbolic scale-dependent dispersion model
Paramagnetism in Ni - Cu alloys
A new derivative type-curve for pressure buildup analysis with boundary effects
Determination of methylmercury and mercury(II) in a marine ecosystem using solid-phase microextraction gas chromatography-mass spectrometry
Measurements and Monte Carlo simulation of grain growth in the heat-affected zone of Ti–6Al–4V welds