Post on 13-Jul-2019
®
If you have a problem, question, or request, callyour local dealer, or Steelcase Line 1 at888.STEELCASE (888.783.3522)for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call: 1.616.247.2500)Or visit our website: www.steelcase.com© 2001 Steelcase Inc. Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
RAYBO
Page 1 of 12939504304 Rev H
Series 9000® Enhanced & ap40™ Power Pole
Page 2 of 12939504304 Rev H
WARNING:ALL ELECTRICAL INSTALLATIONS SHOULD BE
PERFORMED BY A QUALIFIED PERSON IN ACCORDANCEWITH CODES AND REGULATIONS APPLICABLE AT THEINSTALLATION SITE. CIRCUITS SHOULD BE CHECKED
FOR PROPER VOLTAGES
System Flag Color
-3-Circuit, Shared Neutral and System Ground (SHN) Black
-4-Circuit, 3 with Shared Neutral and System Ground
and 1- Isolated Circuit and Ground (3+D) Black
Optional Wiring Schematics: System Flag Color
-2-General Circuits with Shared Neutral & System Ground
and 2-Isolated circuits with Shared Neutral and Isolated Ground (2+2) Grey
-3-Separate Circuits - 2 with own Neutral and Isolated Ground,
1 with own Neutral and System Ground (SPN) White
-4-Circuit - 3 with Shared Neutral and Isolated Ground,
1-Circuit with System Ground) (3I+1) Tan
Wiring
Page 3 of 12939504304 Rev H
Wiring Schematic
GROUND
P-1 P-2 P-3
NEUTRAL
LINE 1
LINE 1
LINE 3
LINE 2
SHARED NEUTRAL
SYSTEM GROUND
ISOLATED GROUND
LINE 2 LINE 3
LINE 4
SHARED NEUTRAL
NOTE:L-1, L-2, & L-3 are connected to P-1, P-2 & P-3 respectively. L-4 is connected to P-1 or P-2 only and not to the samephase as L-3.
NOTE:L-1, and L-2 must be connected to different phases. L-3 and L-4 must be connected to different phases.
NEUTRAL A
NEUTRAL
GROUND
GROUND
GROUND
NEUTRAL BNEUTRAL C
ISOLATED GROUND
P-1 P-2 P-3
NEUTRAL
LINE 1
LINE 1Red
Black
Red
Blue
Red
BluePink
White/Red LettersGray
White/Black LettersGreen/YellowGreen
Black
Red
PinkBlue
Blue
Pink
LINE 2
SHARED NEUTRA LWhite/ Black Letters
White/Red Letters
Gray
Green/Yellow
Green
Whi
te/R
ed L
ette
rs
Whit
e/Blac
k Let
ters
Whit
e/Red
Let
ters
Green
Green
/Yell
ow
Gre
en/Y
ello
w
Whi
te/B
lack
Let
ters
Gre
en
SYSTEM GROUNDLINE 3
LINE 4
SHARED NEUTRAL
ISOLATED GROUND
LINE 2
P-1 P-2 P-3
NEUTRAL
LINE 3 LINE 4
SYSTEM GROUND
P-1 P-2 P-3LINE A
LINE A
LINE C
LINE B
LINE B LINE C
2+2 - Powered by Separate Panels
GROUND
GROUND
P-1 P-2 P-3
NEUTRAL
NEUTRAL
LINE A
LINE A
LINE B
NEUTRAL ANEUTRAL B
ISOLATED GROUND LINE C
NEUTRAL C
SYSTEM GROUND
LINE B
P-1 P-2 P-3LINE C
3 Circuit, Separate Neutrals Powered by Separate Panels 3 Circuit, Separate Neutrals Powered by Single Panels
WARNING:
Risk of Fire or Electric Shock: This office furnishing systemmay be connected to more than one source of supply. All
sources must be disconnected prior to any servicing.No single circuit may be powered by more than one source.
2+2 - Powered by Single Panels
ELECTRICAL DATA:125 V 60 HZ 20 Amp USA/CANADA
208Y/120 VAC 3-Phase Service250/125 VAC 1-Phase Service
Wiring schematics must be followedto prevent overloading of the neutrals.
Pink
Page 4 of 12939504304 Rev H
Wiring Schematic
GROUND
GROUND
GROUND
GROUND
P-1 P-2 P-3
NEUTRAL
LINE 1
LINE 1Red
Pink
Black
Blu e LINE 3
LINE 2
SHARED NEUTRALWhite/Black Letters
Whi
te/R
ed L
ette
rs
Gre
en
Green/Yellow
SYSTEM GROUND
LINE 4
NEUTRAL
ISOLATED GROUND
LINE 3
SHARED NEUTRAL
SYSTEM GROUND
LINE 2
P-1 P-2 P-3
NEUTRAL
LINE 3
LINE 4
P-1 P-2 P-3
NEUTRAL
LINE 1
LINE 1Red
Black
Pink
Gray
Blue LINE 3
3+D - Powered by Separate Panels 3+D Powered by Single Panel
LINE 2
SHARED NEUTRALWhite
Green SYSTEM GROUNDLINE 4
NEUTRAL
ISOLATED GROUND
LINE 2
P-1 P-2 P-3
NEUTRAL
LINE 3
LINE 4
GROUND
P-1 P-2 P-3
NEUTRAL
LINE 1
LINE 1Red
BlackBluePink
Whit
e
Gray
Green
Green
/Yell
ow
LINE 3
LINE 2
NEUTRAL
SYSTEM GROUND
ISOLATED GROUND
LINE 2 LINE 3
LINE 4
SHARED NEUTRAL
GROUND
P-1 P-2 P-3
NEUTRAL
LINE 1
LINE 1Red
BlackBlue
White
Green
White
Green
LINE 2
LINE 2 LINE 3
3I+1 - Powered by Separate Panels
LINE 3
SHARED NEUTRAL
SYSTEM GROUNDGROUND
P-1 P-2
NEUTRAL
LINE 1
LINE 1Red
Black
BlueLINE 2
LINE 2
3I+1 - Powered by Single Panel
NOTE:L-4 may be connectedto P-1, P-2, or P-3
NOTE:L-4 may be connectedto P-1, P-2, or P-3
NOTE:L-3 must be omitted or connected to the load side of L-1 or L-2.
NOTE:L-4 should alternate between P-1, P-2, and P-3 to balance circuit loading.
GROUND
P-1 P-2 P-3
NEUTRAL
LINE 1
LINE 1Red
BlackBluePink
Whit
e/Blac
k Let
ters
Whit
e/Red
Let
ters
Green
Green
/Yell
ow
LINE 3
LINE 2
NEUTRAL
SYSTEM GROUND
ISOLATED GROUND
LINE 2 LINE 3
LINE 4
SHARED NEUTRAL
NOTE:L-4 should alternate between P-1, P-2, and P-3 to balance circuit loading.
WARNING:
Risk of Fire or Electric Shock: This office furnishing systemmay be connected to more than one source of supply. All
sources must be disconnected prior to any servicing.No single circuit may be powered by more than one source.
ELECTRICAL DATA:125 V 60 HZ 20 Amp USA/CANADA
208Y/120 VAC 3-Phase Service250/125 VAC 1-Phase Service
Wiring schematics must be followedto prevent overloading of the neutrals.
Gre
en/Y
ello
w
3 Circuit, Shared Neutral 3 Circuit, Shared Neutral Powered by Split Phase Panel
Page 5 of 12939504304 Rev H
“X” Configuration
End of Run
“L” Configuration
“T” Configuration
Pre-Installation Notes = Power Pole cannot be installed. = Power Pole can be installed. = Mount Power Pole to this panel.
Power Pole connection to the Powerway can only be made on the green end, brown side of Powerway.
X
.1
2
3
4
5
6
Page 6 of 12939504304 Rev H
- Powered by Separate Panels
7. Hinge and End Cover Arrangements
Note: An "L" panel installation is shown. X, T,and End of Run arrangements are similar.
8. Power Pole to PanelPower pole may be installed onto either panel.
Page 7 of 12939504304 Rev H
- Powered by Separate Panels
9. Ceiling obstruction lower than 131 inches will requirecutting of equal amounts off cover, retainer,and conduitto insure exact fit. NOTE: When cutting conduit usecaution to avoid damage to wires inside conduit.
1 Cut Cover to desired length2 Cut retainer to same length3 Re-drill retainer4 Remove elbow assembly5 Cut conduit to same length as cover
Use cut-off retainer section for drill template
Less than 131"
Retainer
Cover
Conduit
A
A
A
4
5
1
2 3
Page 8 of 12939504304 Rev H
- Powered by Separate Panels
10. Box and Upper Cover Retainer assembly
4
5
3
1
2
NOTE: Power may be connected to either panel.
Page 10 of 12939504304 Rev H
12. Lower Cover Retainer Assembly
1 Install Base filler 2 Install filler
NOTE: Line top of filler with top of upright (A)
13. Installation of Power Pole Cover 1 Install 2 Install filler
Top of Panel
Filler
A
1
21
23
4