HK VGUVGU tester and charging unit

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

19.06.2015 HANSA-FLEX AG www.hansa-flex.com 1

PropertiesIncluded in scope of supply Tester and charging unit with 2 pressure

gauges (0-25 bar / 0-250 bar) and connectionM28x1.5Protective caseConnection adapter 7/8" short (>400bar)Connection adapter 7/8" longConnection adapter 5/8"Connection adapter 8V1High-pressure hose 2.5 m longAllen key size 6Replacement sealsOperating manual

NoteCaution! Use only technical nitrogen for charging, never oxygen or air!Risk of explosions!

DescriptionThe precharge pressure of hydraulic accumulators can be checked, reduced and increased. Fits on all bladder accumulatorsIHV bladder accumulators, OLM diaphragm accumulators and all commercially available accumulators with M28 x 1.5 charging connection.

ItemIdentification Note Weight (kg)

HK VGU 250 7 TS3 3 Complete tester and charging unit 2,50

Spare partsHK VGU DICHTSATZ Seal kit, VGU tester and charging unitHK VGU GAS VENT Gas valve kit for bladder accumulators