vgu tester
1
HK VGU VGU tester and charging unit Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability. 19.06.2015 HANSA-FLEX AG www.hansa-flex.com 1 Properties Included in scope of supply Tester and charging unit with 2 pressure gauges (0-25 bar / 0-250 bar) and connection M28x1.5 Protective case Connection adapter 7/8" short (>400bar) Connection adapter 7/8" long Connection adapter 5/8" Connection adapter 8V1 High-pressure hose 2.5 m long Allen key size 6 Replacement seals Operating manual Note Caution! Use only technical nitrogen for charging, never oxygen or air! Risk of explosions! Description The precharge pressure of hydraulic accumulators can be checked, reduced and increased. Fits on all bladder accumulators IHV bladder accumulators, OLM diaphragm accumulators and all commercially available accumulators with M28 x 1.5 charging connection. Item Identification Note Weight (kg) HK VGU 250 7 TS3 3 Complete tester and charging unit 2,50 Spare parts HK VGU DICHTSATZ Seal kit, VGU tester and charging unit HK VGU GAS VENT Gas valve kit for bladder accumulators
description
instruction manual
Transcript of vgu tester
-
HK VGUVGU tester and charging unit
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
19.06.2015 HANSA-FLEX AG www.hansa-flex.com 1
PropertiesIncluded in scope of supply Tester and charging unit with 2 pressure
gauges (0-25 bar / 0-250 bar) and connectionM28x1.5Protective caseConnection adapter 7/8" short (>400bar)Connection adapter 7/8" longConnection adapter 5/8"Connection adapter 8V1High-pressure hose 2.5 m longAllen key size 6Replacement sealsOperating manual
NoteCaution! Use only technical nitrogen for charging, never oxygen or air!Risk of explosions!
DescriptionThe precharge pressure of hydraulic accumulators can be checked, reduced and increased. Fits on all bladder accumulatorsIHV bladder accumulators, OLM diaphragm accumulators and all commercially available accumulators with M28 x 1.5 charging connection.
ItemIdentification Note Weight (kg)
HK VGU 250 7 TS3 3 Complete tester and charging unit 2,50
Spare partsHK VGU DICHTSATZ Seal kit, VGU tester and charging unitHK VGU GAS VENT Gas valve kit for bladder accumulators
