Updating the MapsStep 2

Eclipse AVN726E / AVN76D

www.eclipse-web.com

Updating the Eclipse Map Data

• Select Support > Map Updates

• Select AVN726E / AVN76D Detail

Updating the MapsStep 2

Eclipse AVN726E / AVN76D

Download two software programs to your PC

1. Sync Tool

Software for the SD Card to transfer files back & forth between your Device and PC

2. ToolBox

For your PC to manage the data

Step 1 Update is required before proceeding to Step 2

Scroll to the Step 2 Page

A minimum of 2 GB SD Card is required

Larger SDHC Cards are compatible but may require additional steps if you exceed the on-board memory capacity of the AVN (1.8GB) If necessary, see “How To Transfer Contents” in the FAQ Section at www.naviextras.com

• Scroll down to Step 2

NaviExtras Map Update

Software for SD Card & PC

1. Download NaviExtras SyncTool Software

• UnZip File

• Copy “Update” folder to a blank SD Card

2. Download NaviExtras ToolBox Software

• Install ToolBox Software on to your PC

• Download Sync Tool to PC Desktop – Unzip and transfer Updates Folder to blank SD Card.

• Download Toolbox Software to PC

Download SyncTool

Download SyncTool

• Unzip the Sync Tool File and Copy the “Updates” Folder to the blank SD Card

Download SyncTool

Summary

• Insert the SD Card with the Updates Folder into the AVN

• Collect Device Information from the AVN

• Return to PC & proceed to ToolBox Software

Collecting Device Information

• Press Eject • Press Open• Place the SD Card into the device• Press Close

Collecting Device Information

Collecting Device Information

• On the Navi Screen Press “Menu”• Press “Settings”

• Press the Arrow to advance to Page 2

Collecting Device Information

• Press “About”

Collecting Device Information

• Press “Update”

Collecting Device Information

Collecting Device Information

• Press “Collect device information”

• Press “YES”

Collecting Device Information

• Upon completion, Press “OK”

Collecting Device InformationIMPORTANT !Do not interrupt power during the collection processThis process requires less than 15 minutes to completePlease Note: Vehicle must be running or ACC ON without interruption

• Press “Quit”

Collecting Device Information

• Press “Yes”

Collecting Device Information

• Remove the SD Card• Press “Continue”

– The AVN will Reboot • Turn off the vehicle and return to the PC for Updating

Collecting Device Information

Download Toolbox

ToolBox

Summary

• Close all other programs and download ToolBox Software on PC

• Install and Open the ToolBox Software

Open ToolBox

• ToolBox requires an internet connection to communicate to the Naviextra’s Update Server

Registering Device on the update server

• With the data collected, place the SD Card back into the PC • Toolbox will recognize this as a “Device” and register with the

update server• Toolbox will then show “Device Connected”

• The My Updates tab will show available updates for your device

• Select My Updates

• Select “Install”

• Select “Yes” to create a back up of your current data before installing new content

• The backup file name will be titled with the date or you can change the name for familiarity

• The Back Up Process will take approximately 10 Minutes and will indicate progress and the time remaining

• Once BU is complete press “Next”

• If present, uncheck Fix for Navigation• Confirm that Latest Map Guarantee is checked• Select Apply

IMPORTANT !

Do not to turn off or suspend the PC or interrupt the installation wizard during the download process

• Click “Apply”

• Toolbox will begin downloading updates and provide a status of the progress and the estimated time before completed. (Slow internet connections require more time)

Download speed will vary depending on your internet connection. On average, the complete update download including POI’s is less than an hour

• Once completed, select “Done”

Summary

• Transfer the SD Card to the vehicle with the New Data

• Restore Device Information

• Remove the SD Card

Updating the AVN

• Press Eject • Press Open• Place the SD Card into the device

Updating the AVN

Updating the AVN

• On the Navi Screen Press “Menu”• Press “Settings”

• Press the Arrow to advance to Page 2

Updating the AVN

• Press “About”

Updating the AVN

• Press “Update”

Updating the AVN

• Press “Restoring to the device”

Updating the AVN

• Upon completion, Press “OK”

Updating the AVNIMPORTANT !Do not interrupt power during this processThis process requires about 10-15 minutes

• Press “Quit”

Updating the AVN

• Press “Yes”

Updating the AVN

• Press Eject and Remove the SD Card

• Press “Continue”– The AVN will Reboot

• You have completed the Map Update Process

Updating the AVN

Confirm the New Maps

• On the Navi Screen Press “Menu”• Press “Settings”

• Press the Arrow to advance to Page 2

Confirm the New Maps

• Press “About”

Confirm the New Maps

• Press “Maps”

Confirm the New Maps

Confirm the New Maps

• You will recognize the newer map dates• Select Licenses for additional information

Please Visit www.eclipse.naviextras.com/shop/portal/support for additional support and

FAQ

Updating the MapsStep 2

Eclipse AVN726E / AVN76D