Post on 23-Sep-2018
www.tridonic.com 1Subject to change without notice.
Data sheet 03/12-LED039-2
U – LED modules, converters and systemsGENERAL ILLUMINATION
Product description
•LED modules for spotlights
•Narrow beam angle (25°)
•Compact dimensions
•High luminous intensity
•Available in different light colours
•Dimming range 0.1 to 100 %
•NTC for temperature control
•Linear lenses made of PMMA
•Mounting plate made of aluminium
•Attached with M3 screws
•Designed for SELV converters
•Connection: Cable 450 mm
•Cooling required
Technical dataBeam characteristic 25°
Ambient temperature ta -20 ... +55 °C
Typ. tc point 65 °C
Weight 95 g
Protection class III
Risk group (EN 62471:2008) 0
ÈStandards, page 2
Colour temperatures and tolerances, page 4
Umodule FULMEN 25°umodule FULMEN
17,5
0±1
450
20±
5
51
tc
0-0,20
Ordering dataColourtemperature
Colour Type Article number
3,000 K Warm white LED FULMEN-2 D51 3000K 500MA 27W 25° 89601400
4,000 K Neutral white LED FULMEN-2 D51 4000K 500MA 27W 25° 89601401Packaging: 12 pieces
Converter matrix – Umodule FULMEN 25°
IN-BUILT LCI
Type 0030 K500 one4all
Art. no. 86458561
Assignable converter
Type Min. Max.
Umodule FULMEN 25° 1 1
Specific technical dataType Typ.
luminous flux1Number of channles
Current per channel12
Typ. supply voltage Power consumption Colour rendering index CRI
Efficacymodule
Efficacysystem3
LED FULMEN-2 D51 3000K 500MA 27W 25° 1,120 lm 2 500 mA 27 V 27 W 80 42 lm/W 38 lm/W
LED FULMEN-2 D51 4000K 500MA 27W 25° 1,440 lm 2 500 mA 27 V 27 W 80 53 lm/W 47 lm/WAll values at ta = 25 °C and tc = 65 °C.
1 Tolerance range for optical and electrical data: ±10 %.
2 Exceeding the max. operating current leads to an overload on the umodule.This may in turn result in a significant reduction in lifetime or even destruction of the umodule.
3 With mentioned converters in the converter matrix.PHASED
OUT
www.tridonic.com 2Subject to change without notice.
Data sheet 03/12-LED039-2
U – LED modules, converters and systemsGENERAL ILLUMINATION
Cooling characteristics
NotesRth = thermal resistance of heat sink.A thermal connection between TALEXXmodule FULMEN and heat sink with heat-conducting paste or heat conducting adhesive film is necessary.
Operation with 1.000 mA (500 mA per channel)
Umodule FULMEN 25°ta tc Rth, hs-a
25 °C 65 °C 1.3 K/W35 °C 65 °C 0.8 K/W45 °C 65 °C 0.4 K/W
Standards•EN 62031•EN 62471
Mounting instruction
umodule from Tridonic which have to be installed on a heat sink have to be connected with heat-conducting paste or heat conducting adhesive film and fixed with M3 screws.
The fixing/cooling surface must be cleaned before installing the u modules to remove all dirt, dust and grease.
None of the components of the umodule module (substrate, LED, electronic components etc.) may be exposed to tensile or compressive stresses.
For further information please refer to to the brochure entitled “u installation instructions and guidelines”.
Temperature controlAn NTC resistor is on the board of the umodule FULMEN 25° to control the tc temperature during the operation.Exact position see drawing on page 1.The details of the 22 kΩ NTC (order number B57431V2223J062) you can find in the data sheet of the manufacturer AVX (Nr. NB12QØØ224).
Thermal design and heat sinkThe rated life of u products depends to a large extent on the temperature. If the permissible temperature limits are exceeded, the life of the umodule module will be greatly reduced or the umodule module may be destroyed.
Therefore the umodule FULMEN 25° needs to be mounted onto a heat sink.
Tridonic’s excellent thermal design for the umodule products provides the lowest thermal resistance and therefore allowing new compact designs without sacrificing quality, safety and life time.
Thermal behaviour
storage temperature -20 – 80 °Coperating temperature -20 – 55 °Ctc max. 70 °C
20 %
30 %
40 %
50 %
60 %
70 %
80 %
90 %
100 %
110 %
120 %
30 40 45 55 70Tc [°C]
rel.
lum
inou
s flu
x [a
.u.]
25 656035 50 75
Characteristic line of relative luminous flux
Lifetime
0
2
4
6
8
10
12
14
16
18
20
30 40 45 55 70Temperature [°C]
Resi
stan
ce [k
Ω]
25 656035 50 75
22
24
80 85
Characteristic line of NTC
tc temperature in °C luminous flux in % lifetime in h
2580 60,00070 81,00050 132,000
4580 44,00070 64,00050 110,000
6580 32,00070 50,00050 91,000
7580 25,00070 41,00050 81,000
PHASED
OUT
www.tridonic.com 3Subject to change without notice.
Data sheet 03/12-LED039-2
U – LED modules, converters and systemsGENERAL ILLUMINATION
Optical characteristics Umodule FULMEN 25°
The optical design of the umodule product line ensures optimumhomogenity for the light distribution.
Light distribution
0°
20
20
-20 40
40
60
60
80
100
80 100-40-60-80-100
10°-10° 20°-20°-30°
-40°
-50°
-60°
30°
40°
50°
60°
70°
80°
90°-90°0
rela
tive
inte
nsity
Iv/Iv
,max
Wiring
Cable: LAPP UNITRONIC LIHH 6 x 0,14; length: 450 mm
Number PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6Colour white brown green yellow grey pink
Functionchannel 1
+channel 1
–channel 2
+channel 2
–NTC NTC
Wiring example
Ch1+
Ch1-
Ch2-
Ch2+
NTC
NTC
12V
0V
Uconverter
white
brown
green
yellow
grey
pink
Fan
FULMEN D51
max
. 5
51
Heat sink
0-0,20
42±0,20 M3
Mounting
Light colour Ivmax.
3,000 K 3,500 cd4,000 K 4,500 cd
PHASED
OUT
www.tridonic.com 4Subject to change without notice.
Data sheet 03/12-LED039-2
U – LED modules, converters and systemsGENERAL ILLUMINATION
Coordinates and tolerances according to CIE 1931
The specified colour coordinates are measured by a current impulse of 500 mA and a duration of 100 ms.The ambient temperature of the measurement is ta = 25 °C.The measurement tolerance of the colour coordinates are ± 0.01.
380 420 460 500 540 580 620 660 700 740 780
wave length [nm]
norm
. int
ensi
ty [%
]
0
20
40
60
80
100
0.3600
0.3650
0.3700
0.3750
0.3800
0.3850
0.3900
0.3950
0.4000
0.36
50
0.37
00
0.37
50
0.38
00
0.38
50
0.39
00
0.39
50
0.40
00
0.40
50
0,3800
0,3850
0,3900
0,3950
0,4000
0,4050
0,4100
0,4150
0,4200
0,42
50
0,43
00
0,43
50
0,44
00
0,44
50
0,45
00
0,45
50
0,46
00
0,46
50
380 420 460 500 540 580 620 660 700 740 780
wave length [nm]
norm
. int
ensi
ty [%
]
0
20
40
60
80
100
Characteristic line 3,000 K
Characteristic line 4,000 K
3,000 Kx0 y0
Centre 0,4460 0,3990
4,000 Kx0 y0
Centre 0,3860 0,3780
PHASED
OUT