UL325 Safety Certified Gate Installations

Post on 15-Jan-2017

44 views 2 download

Transcript of UL325 Safety Certified Gate Installations

GATE OPERATOR SAFETY

Are your gatesUL325 Compliant?

wilcoxdoor.com

wilcoxdoor.com

3 out of 4gates & operatorslack or need replacementsof necessary safety features.

wilcoxdoor.com

Why is this important?

wilcoxdoor.com

... to prevent futureaccidents or fatalities.

wilcoxdoor.com

independent safetydevices installed ateach entrapment zone ?

Do you have 2*Photo-Eyes or Safety Edge

2

1

2

3

4

56

Potential Zones for Entrapment Protection

SECURE(inside)

PUBLIC (outside)

Draw-in ZonesEdge sensors protect areas of entrapment along posts or walls

1

Trailing End3

Leading End

PUBLIC (outside)

SECURE(inside) 2

1) Leading Edge2) Bottom Edge3) Entry/Exit4) Posts5) Post Pivot/Pinch Points6) Arm Movement

1) Draw-In Zones2) Leading End3) Trailing End

wilcoxdoor.com

wilcoxdoor.com

UL325 Standards(Underwriters Laboratory)

Gate Operator approved to current standards

Proper gate warning signs attached to both sides of gate area

Each entrapment zone protected by 2 safety devices/obstruction tested

Installation StandardsOnly install operator on gates used for vehicular traffic.

A separate pedestrian entry/exit must be clearly visible to promotepedestrian usage. It must also be located away from vehicle gate sopedestrians do not come in contact with it.

Install both primary & secondary devices to protect each entrapment zone.

Pickets of a slide gate must be designed/screened to prevent personsfrom reaching/passing through a gate.

wilcoxdoor.com

wilcoxdoor.com | 905-274-9413

Make Safety your Priority.Schedule your free consultation to ensure yourgates and operators are UL325 Safety Compliant.