UL325 Safety Certified Gate Installations
-
Upload
bill-stewart -
Category
Devices & Hardware
-
view
44 -
download
2
Transcript of UL325 Safety Certified Gate Installations
GATE OPERATOR SAFETY
Are your gatesUL325 Compliant?
wilcoxdoor.com
wilcoxdoor.com
3 out of 4gates & operatorslack or need replacementsof necessary safety features.
wilcoxdoor.com
Why is this important?
wilcoxdoor.com
... to prevent futureaccidents or fatalities.
wilcoxdoor.com
independent safetydevices installed ateach entrapment zone ?
Do you have 2*Photo-Eyes or Safety Edge
2
1
2
3
4
56
Potential Zones for Entrapment Protection
SECURE(inside)
PUBLIC (outside)
Draw-in ZonesEdge sensors protect areas of entrapment along posts or walls
1
Trailing End3
Leading End
PUBLIC (outside)
SECURE(inside) 2
1) Leading Edge2) Bottom Edge3) Entry/Exit4) Posts5) Post Pivot/Pinch Points6) Arm Movement
1) Draw-In Zones2) Leading End3) Trailing End
wilcoxdoor.com
wilcoxdoor.com
UL325 Standards(Underwriters Laboratory)
Gate Operator approved to current standards
Proper gate warning signs attached to both sides of gate area
Each entrapment zone protected by 2 safety devices/obstruction tested
Installation StandardsOnly install operator on gates used for vehicular traffic.
A separate pedestrian entry/exit must be clearly visible to promotepedestrian usage. It must also be located away from vehicle gate sopedestrians do not come in contact with it.
Install both primary & secondary devices to protect each entrapment zone.
Pickets of a slide gate must be designed/screened to prevent personsfrom reaching/passing through a gate.
wilcoxdoor.com
wilcoxdoor.com | 905-274-9413
Make Safety your Priority.Schedule your free consultation to ensure yourgates and operators are UL325 Safety Compliant.