Post on 01-Jan-2016
description
© Ernst Reime Vertriebs GmbH 2
Corehole-dia.
Major-dia.(contour)
Way of the tool centre
Way of the tool centre
small correction of
the profile
large correction of
the profile
Corrected thread profile
radial contact points
© Ernst Reime Vertriebs GmbH 3
Inserts
> 6
0°
The inserts are with a corrected thread profile
Reasons why the inserts can not damage the profil in the work piece:
1.) inserts are corrected at the profile
2.) The position of the inserts in the body is in front of the center line
3.) the inserts fits in 90° in the body
4.) The positioning guarantee enough space between backside of the insert and work piece
© Ernst Reime Vertriebs GmbH 4
NORIS NES – Inserts
Cat. No.: F510, F511, F512, F513, F514, F521
Thread types: M, UN, G
Material: Carbide - P30
Coating: TiN or TiAlN
Cutting edges: F521: 2 / all others 4
Dimensions: M: 1,0 mm – 8,0 mm pitch
UN: 24 – 3 tpi
G: 11 and 14 tpi
Suitable for: Steels and difficult machinable materials up to 1400N/mm²
Stainless steels up to 1100N/mm²
Non ferrous and cast materials