Thread Milling

25
F N THREAD MILLING SmiCut TM S T S CONTENTS 3 Technical Information 4 Solid Carbide Thread Mills 10 with Chamfer 15 with Internal Coolant 16 with Internal Radial Coolant 17 Micro, one tooth 18 Micro, two teeth 19 Tapered End Mills for NPT/NPTF/BSPT 14 Thread Milling Cutters 20 Thread Milling Inserts 22 Spiral Fluted Thread Milling Cutters 24 Spiral Fluted Thread Milling Inserts 26

description

Thd

Transcript of Thread Milling

  • 3SmiCutTM

    S T S

    FN

    THREAD MILLINGSmiCut

    TM

    S T SCONTENTS

    3

    Technical Information 4

    Solid Carbide Thread Mills 10

    with Chamfer 15

    with Internal Coolant 16

    with Internal Radial Coolant 17

    Micro, one tooth 18

    Micro, two teeth 19

    Tapered End Mills for NPT/NPTF/BSPT 14

    Thread Milling Cutters 20

    Thread Milling Inserts 22

    Spiral Fluted Thread Milling Cutters 24

    Spiral Fluted Thread Milling Inserts 26

  • 4SmiCutTM

    S T S

    The advantage with ThreadBurr is that you can thread and deburr in one operation. No additional time for deburring and countersink is needed. The deburring operation is made automatically when thread milling, which gives you the deburring without any extra costs.

    There is no disadvantage to use the ThreadBurr, even if you don t use the deburring function. ThreadBurr is standard on all thread mills from SmiCut.

    l

    lLP

    To get a nice entry and a burr free thread you need to start out with going to full depth (l) in to the hole before starting the threading operation. The thread length (L) will be the cutting length (l) minus one pitch (P).

    Double ThreadBurrIt is possible to get the thread deburred on both sides. For this operation you need to use a special tool as thread length depends on the thickness of the material. Have in mind the following when you order a tool for deburring on both sides.

    n The cutting length (l) should be equivalent to the thickness of the material.

    ExampleM30x3 thread length 40 mm

    40 / 3 = 13,3 Number of pitches13 x 3 = 39,0 mm Cutting length (l)

    Thread Milling with NBB2020D39_3.0ISO_AC (l = 39,0 mm)

    l

    l

    l - P1,5 x P

    SOLID CARBIDE THREAD MILLSThreadBurr

    TiAlCN

    deburring

    deburring

    deburring

  • 5SmiCutTM

    S T S

    lc

    Through holesYou can always use a standard tool for through holes. Please take in mind you should use a tool as short as possible to get best stability and economy.

    Blind HolesWith blind holes it is important to have the correct cutting length (l) on the tool to get the thread deburred. Normally you will find a suitable standard tool. If not, we will cut the tool to the correct length with extremely short delivery time and at a reasonable price. Have in mind the following when you order a tool for blind holes.

    n The cutting length (l) should be required thread length (L) plus one pitch (P).n The distance to cut off (c) has to be dividable by the pitch (P).

    ExampleM16x1,5 thread length 24 mm Thread Milling with NB1212D29_1.5ISO_AC (L = 29,25 mm)

    24 + 1,5 = 25,5 mm Required cutting length (l)29,25 -25,5 = 3,75 mm Maximum cutting off3,75 / 1,5 = 2,5 Number of pitches to cut off2 x 1,5 = 3,0 mm Distance to cut off (c)29,25 - 3,0 = 26,25 mm Cutting length (l) after cutting off26,25 - 1,5 = 24,75 mm Thread length (L) after cutting off

    You only need to cut of the tool when you want to use the deburring function on blind holes and if there is no standard tool with suitable cutting length.

    SOLID CARBIDE THREAD MILLSThreadBurr

    TiAlCN

    deburring no deburring

    no deburring

    deburring

    cutting off

  • 6SmiCutTM

    S T S

    THREAD MILLINGAdvantages

    n 1) A secure machining operationMinimal risk for machining stops as the cutting forcesare low and the chips are short. Should there be an accident, the work piece will not be destroyed, as the tool will not be caught since the diameter of the thread mill is less than the thread.

    n 2) Threading in difficult machined materialsThe excellent cutting conditions makes it possible tothread mill materials such as hardened steel up to HRC 65, Titanium and other difficult machined materials.

    n 3) Higher quality threadThe cutting conditions are extremely good when you are thread milling. The result of the thread is a higher quality of surface finish, tolerance, angle, etc. compared with other threading methods.

    n 4) Flexible toolSame cutter can be used for right hand and left hand thread. Threads with different diameters can be made with the same tool as long as the pitch is the same. The same thread mill can be used for blind holes and through holes. W, BSPT, PG, NPT, NPTF and NPSF are thread profiles where you can use the same tool for external and internal thread.

    n 5) Threading in blind holesWhen thread milling you will get a complete thread profile to the bottom of the hole. When tapping its necessary to drill much deeper as its not until the third thread the tap will make a complete thread profile. Sometimes you are able to change the construction as you dont have to take the deep hole into consideration.

    n 6) Less wear on the machine spindleThread milling will give you longer life to the machine spindle compared with tapping as the rotation on the spindle doesnt need to be stopped and reversed for every thread.

    n 7) Energy-saving productionLow energy consumption as the machine spindle doesnt need to be stopped and started after each thread.

    n 8) Thread Milling in a lathe with live toolsReduced machining time compared with thread turning. Excellent chip control.

    n 9) Threading without burrsThe thread entrance will be burr free when using ThreadBurr. Threading and deburring in one operation. No additional time for deburring.

    n 10) Shorter machining timeThe machining time will be short as you dont need to chamfer the thread while using ThreadBurr. Big diameters, fine pitches and long holes saves the most time compared with thread tapping.

    n 11) Correct Thread Diameter right awayThe Pitch diameter has been optically measured on thread mills from SmiCut and the theoretical external diameter has been individually laser marked on each cutter so you will get a correct thread straight away. When the tool starts to wear its possible to make adjustments in the CNC-program.

  • 7SmiCutTM

    S T S

    SMIPROGSoftware for Thread Milling

    Chinese (simp.)Chinese (trad.)DanishDutchEnglishEstonianEuskeraFinishFrenchGermanHungarianItalianJapaneseKoreanNorweiganPolishPortugeseRomanianRussianSpanishSwedish

    Choose amongthese languages

    SmiProg makes it easy to Thread MillSpecify control system, material, thread diameter, pitch and thread length. The program will recommend suitable tools. Choose one and you will recieve suggested cutting data, time to mill the thread and CNC programming code. The software is made in excel and is less than 500kb even though it includes 21 different languages. You can download SmiProg free of charge at www.smicut.se

    10NB 10 D 23 1.5 ACISOtype of tool

    shank dimension

    cutter diameter cutting length

    carbide grade

    thread profile

    Code Key

    N = internal threadingE = external threadingX = in- and external threadingB = burringBB = burring on both sidesF = chamferingS = micro, one toothM = micro, two teethK = internal coolantT = internal radial coolant

    cutting edges pitch

    C = 3-skrigD = 4-skrigE = 5-skrigF = 6-skrig

  • 8SmiCutTM

    S T S

    CUTTING DATA Thread Milling

    dD

    starting point compensation on entrance thread milling exit compensation off

    MATERIAL

    Low carbon, C < 0,25%Medium carbon, C < 0,55%High carbon, C < 0,85%Low alloyHigh alloyHardened, HRC < 45Hardened, HRC < 55Hardened, HRC < 65Lamellar graphiteLamellar graphiteNodular graphite, malleableNodular graphite, malleableFree machiningAusteniticFerritic and austeniticUnalloyedAlloyedAlloyedUnalloyedAlloyedAlloyedUnalloyedBrass, bronzeHigh strength bronzeUnalloyedAlloyed, Si < 0.5%Alloyed, Si < 10%Alloyed, Si > 10%718

    Steel

    Cast iron

    Stainless steel

    Titanium

    Nickel

    Copper

    Aluminium

    InconelGraphite

    HardnessHB

    Tensile StrenghtN/mm2

    150 - 200120 - 170110 - 150100 - 14070 - 11060 - 10030 - 6020 - 40

    130 - 180100 - 150100 - 15080 - 120

    130 - 18090 - 14080 - 12060 - 8050 - 7030 - 50

    80 - 12060 - 8050 - 70

    150 - 250130 - 180

    60 - 80500 - 900400 - 800300 - 500200 - 400

    50 - 70300 - 500

    1,21,11,01,00,90,80,70,61,21,11,00,91,00,90,80,80,70,60,80,70,61,01,00,81,41,31,21,10,61,0

    < 120< 200< 250< 250< 350

    < 150< 300< 200< 300< 250< 250< 300< 200< 270< 350< 150< 270< 350< 100< 200< 470< 100< 150< 120< 120< 370

    < 400< 700< 850< 850

    < 1200

    < 500< 1000< 700

    < 1000< 850< 850

    < 1000< 700< 900

    < 1250< 500< 900

    < 1250< 350< 700

    < 1500< 350< 500< 400< 400

    Cutting Speed (Vc) and Material Factor (Fm)Material Factor

    (Fm)Cutting Speed

    (Vc) m/min

    1,751,521,311,201,090,990,900,780,670,61

    1,591,381,201,090,990,900,820,700,610,56

    1,451,251,090,990,900,820,740,640,560,51

    1,311,140,990,900,820,740,670,580,510,46

    1,201,040,900,820,740,670,610,530,460,42

    1,090,940,820,740,670,610,560,480,420,38

    0,990,860,740,670,610,560,510,440,380,35

    0,900,780,670,610,560,510,460,400,350,31

    0,820,700,610,560,510,460,420,360,310,29

    L / d = 1,0L / d = 1,25L / d = 1,5L / d = 1,75L / d = 2,0L / d = 2,25L / d = 2,5L / d = 3,0L / d = 3,5L / d = 4,0

    Engagement Factor (Fe)B/d =0,05

    B/d =0,06

    B/d =0,07

    B/d =0,08

    B/d =0,09

    B/d =0,10

    B/d =0,12

    B/d =0,14

    B/d =0,16

  • 9SmiCutTM

    S T S

    Thread Milling CUTTING DATA

    L

    P

    Bd

    D

    M24x3,0 thread length 36 mmCarbon Steel, up to 400 N/mm2Thread Milling with NB1616C40_3.0ISO_ACB = 0,54 x 3 = 1,62 mmB/d = 1,62/16 = 0,10L/d = 36/16 = 2,25Fz = 1,2 x 0,61 x 0,067 = 0,049n = (160 x 1000) / ( x 16) = 3183 rpmVfD = 0,049 x 3 x 3183 = 468 mm/minVfd = 468 x (24-16) / 24 = 156 mm/minT = (278 x 24) / 468 = 14 seconds

    1,52,03,04,05,06,08,0

    10,012,014,016,018,020,025,032,040,0

    0,0100,0110,0150,0190,0240,0280,0360,0440,0520,0600,0670,0750,0820,1010,1260,156

    D Diameter Factor(Fd)

    Diameter Factor (Fd)

    L = thread lenght (mm)d = cutter diameter (mm)B = depth of profile (mm)P = pitch (mm)z = cutting edgesFz = feed / flute (mm/flute)n = spindle speed (rpm)Vc = cutting speed (m/min)VfD = feed at thread diameter (mm/min)Vfd = feed at center of mill (mm/min)T = time to mill the thread (seconds)

    D = thread diameter (mm)Fz = Fm x Fe x Fd

    VfD = Fz x z x n

    n = Vc x 1000 x d

    B = 0,54 x P

    Vfd = VfD x (D - d)D

    Example

    Carbide Grades

    AC FC Micrograin Carbide with TiAlN coating. Allround Grade with high heat resistance.Use cutting data according to the tables.Micrograin Carbide with TiAlCN coating. Allround Grade with low friction.Use cutting data according to the tables.

    T = 278 x D VfD

  • 10

    SmiCutTM

    S T S

    SOLID CARBIDE THREAD MILLS

    ACTiAlCN coatedMicrograin CarbideToleranceThe theoretical external diameter ofthe cutter is lasermarked on the tool.ShankCylindrical h6, DIN6535 HAFlute15 right hand spiralField of applicationThread Milling of all types of steel

    l

    d

    L

    D

    44444444466646444446664466444666666668

    126666888

    1,51,51,61,61,91,92,32,32,32,32,32,33,83,82,62,6333333

    3,43,44,54,53,83,83,83,83,83,84,54,54,54,568

    126666

    7,57,57,5

    3333333333333333333333333333333333333463333333

    0,40,4

    0,450,450,450,450,50,50,50,50,50,50,50,50,60,60,70,70,70,70,70,7

    0,750,750,750,750,80,80,80,80,80,81,01,01,01,01,01,01,0

    1,251,251,251,251,51,51,5

    3,44,6

    3,825,174,275,625,256,758,255,256,758,25

    10,7510,75

    6,38,1

    7,358,75

    10,857,358,75

    10,857,87

    10,1210,8716,87

    8,410,813,28,4

    10,813,210,513,516,519,513,517,521,5

    14,3718,1221,8725,6217,2521,7527,75

    50505050505050505063636350635050505050636363505063635050506363636363636363638363636376637676

    Part Numberd

    mmD

    mmCuttingedges

    Pitchmm

    M4 M4 M4 M4 M4 M4 M5 M5

    M6 M6

    M8 M8 M8 M8 M8

    M10 M14 M10 M10 M10 M10 M12 M12 M12

    Mfine

    M2 (1,5xD)M2 (2xD)M2,2 (1,5xD)M2,2 (2xD)M2,5 (1,5xD)M2,5 (2xD)M3 (1,5xD)M3 (2xD)M3 (2,5xD)M3 (1,5xD)M3 (2xD)M3 (2,5xD)

    M3,5 (1,5xD)M3,5 (2xD)M4 (1,5xD)M4 (2xD)M4 (2,5xD)M4 (1,5xD)M4 (2xD)M4 (2,5xD)M4,5 (1,5xD)M4,5 (2xD)

    M5 (1,5xD)M5 (2xD)M5 (2,5xD)M5 (1,5xD)M5 (2xD)M5 (2,5xD)M6 (1,5xD)M6 (2xD)M6 (2,5xD)M6 (3xD)

    M8 (1,5xD)M8 (2xD)M8 (2,5xD)M8 (3xD)M10 (1,5xD)M10 (2xD)M10 (2,5xD)

    Mcoarse

    lmm

    Lmm

    INTERNALMETRICM

    ThreadBurrTiAlCN

    NB04015C3_0.4ISO_ACNB04015C4_0.4ISO_ACNB04016C3_0.45ISO_ACNB04016C5_0.45ISO_ACNB04019C4_0.45ISO_ACNB04019C5_0.45ISO_ACNB04023C5_0.5ISO_ACNB04023C6_0.5ISO_ACNB04023C8_0.5ISO_ACNB06023C5_0.5ISO_ACNB06023C6_0.5ISO_ACNB06023C8_0.5ISO_ACNB04038C10_0.5ISO_ACNB06038C10_0.5ISO_ACNB04026C6_0.6ISO_ACNB04026C8_0.6ISO_ACNB0403C7_0.7ISO_ACNB0403C8_0.7ISO_ACNB0403C10_0.7ISO_ACNB0603C7_0.7ISO_ACNB0603C8_0.7ISO_ACNB0603C10_0.7ISO_ACNB04034C7_0.75ISO_ACNB04034C10_0.75ISO_ACNB06045C10_0.75ISO_ACNB06045C16_0.75ISO_ACNB04038C8_0.8ISO_ACNB04038C10_0.8ISO_ACNB04038C13_0.8ISO_ACNB06038C8_0.8ISO_ACNB06038C10_0.8ISO_ACNB06038C13_0.8ISO_ACNB06045C10_1.0ISO_ACNB06045C13_1.0ISO_ACNB06045C16_1.0ISO_ACNB06045C19_1.0ISO_ACNB0606C13_1.0ISO_ACNB0808D17_1.0ISO_ACNB1212F21_1.0ISO_ACNB0606C14_1.25ISO_ACNB0606C18_1.25ISO_ACNB0606C21_1.25ISO_ACNB0606C25_1.25ISO_ACNB08075C17_1.5ISO_ACNB08075C21_1.5ISO_ACNB08075C27_1.5ISO_AC

  • 11

    SmiCutTM

    S T S

    TiAlCN SOLID CARBIDE THREAD MILLS

    METRIC

    NB08075C32_1.5ISO_ACNB1010D23_1.5ISO_ACNB1212D29_1.5ISO_ACNB1616F35_1.5ISO_ACNB0808C20_1.75ISO_ACNB0808C27_1.75ISO_ACNB1009C20_1.75ISO_ACNB1009C27_1.75ISO_ACNB1009C32_1.75ISO_ACNB1009C37_1.75ISO_ACNB1010C23_2.0ISO_ACNB1010C31_2.0ISO_ACNB1010C37_2.0ISO_ACNB1212D27_2.0ISO_ACNB1212D35_2.0ISO_ACNB1212D43_2.0ISO_ACNB1212C51_2.0ISO_ACNB1616E39_2.0ISO_ACNB2020F43_2.0ISO_ACNB2525F57_2.0ISO_ACNB1212C31_2.5ISO_ACNB1212C38_2.5ISO_ACNB1212C48_2.5ISO_ACNB1414D33_2.5ISO_ACNB1414D43_2.5ISO_ACNB1615D53_2.5ISO_ACNB1615C63_2.5ISO_ACNB1616C40_3.0ISO_ACNB1616C52_3.0ISO_ACNB1818C64_3.0ISO_ACNB2020D46_3.0ISO_ACNB2525D61_3.0ISO_ACNB2020C50_3.5ISO_ACNB2020C64_3.5ISO_ACNB2020C78_3.5ISO_ACNB2525C58_4.0ISO_ACNB2525C78_4.0ISO_AC

    810121688

    10101010101010121212121620251212121414161616161820252020202525

    7,5101216889999

    101010121212121620251212121414151516161820252020202525

    3446333333333444356633344433334433333

    1,51,51,51,5

    1,751,751,751,751,751,752,02,02,02,02,02,02,02,02,02,02,52,52,52,52,52,52,53,03,03,03,03,03,53,53,54,04,0

    32,2523,2529,2535,2520,1227,1220,1227,1232,3737,62

    23313727354351394357

    31,2538,7548,7533,7543,7553,7563,7540,552,564,546,561,5

    50,7564,7578,75

    5878

    767683

    10076767676

    10010076

    10010083

    10010010010010013010010010089

    100120120100120130120130120150150130150

    Part Numberd

    mmD

    mmCuttingedges

    Pitchmm

    M12 M14 M16 M20

    M18 M18 M18 M18 M18 M18 M18 M20 M24 M30

    M30 M30 M30 M30 M33

    M42 M42

    Mfine

    M10 (3xD)

    M12 (1,5xD)M12 (2xD)M12 (1,5xD)M12 (2xD)M12 (2,5xD)M12 (3xD)M14 (1,5xD)M14 (2xD)M14 (2,5xD)M16 (1,5xD)M16 (2xD)M16 (2,5xD)M16 (3xD)

    M18 (1,5xD)M18 (2xD)M18 (2,5xD)M20 (1,5xD)M20 (2xD)M20 (2,5xD)M20 (3xD)M24 (1,5xD)M24 (2xD)M24 (2,5xD)

    M30 (1,5xD)M30 (2xD)M30 (2,5xD)M36 (1,5xD)M36 (2xD)

    Mcoarse

    lmm

    Lmm

    INTERNAL

    continue

    M

    METRIC (external)MPart Number

    dmm

    Dmm

    Cuttingedges

    Pitchmm

    lmm

    Lmm

    EB1010D21_1.0ISO_ACEB1212D26_1.5ISO_ACEB1616D35_2.0ISO_AC

    101216

    101216

    444

    1,01,52,0

    21,526,25

    35

    7683

    100

    EXTERNAL

    SmiCut produce Solid Carbide Thread Mills with pitches up to 6,0 mm (4TPI).

    Deburring of the thread

  • 12

    SmiCutTM

    S T S

    SOLID CARBIDE THREAD MILLS TiAlCN

    NB04024C5_44UN_ACNB04023C5_40UN_ACNB04023C7_40UN_ACNB04023C8_40UN_ACNB04026C6_40UN_ACNB04031C7_36UN_ACNB04031C9_36UN_ACNB04025C6_32UN_ACNB04025C8_32UN_ACNB04025C10_32UN_ACNB0403C7_32UN_ACNB0403C9_32UN_ACNB0403C11_32UN_ACNB04036C8_32UN_ACNB04036C10_32UN_ACNB0606D13_32UN_ACNB0404C9_28UN_ACNB0404C12_28UN_ACNB0605C10_28UN_ACNB0605C14_28UN_ACNB0808D17_28UN_ACNB04038C9_24UN_ACNB04038C11_24UN_ACNB04038C13_24UN_ACNB0404C10_24UN_ACNB0404C12_24UN_ACNB0404C15_24UN_ACNB0606C13_24UN_ACNB0606C17_24UN_ACNB08076C15_24UN_ACNB08076C20_24UN_ACNB06045C10_20UN_ACNB06045C14_20UN_ACNB06045C17_20UN_ACNB0808C18_20UN_ACNB0808C23_20UN_ACNB1010D21_20UN_ACNB1010D27_20UN_ACNB1212E28_20UN_ACNB06058C13_18UN_ACNB06058C17_18UN_ACNB06058C21_18UN_ACNB1010D23_18UN_ACNB1010D30_18UN_ACNB1212D26_18UN_ACNB1212D33_18UN_ACNB0606C16_16UN_ACNB0606C21_16UN_ACNB0807C26_16UN_ACNB1212D31_16UN_ACNB1212D40_16UN_ACNB1616E35_16UN_ACNB0808C19_14UN_ACNB0808C24_14UN_ACNB0808C30_14UN_ACNB1616E35_14UN_ACNB1616E46_14UN_ACNB0808C22_13UN_ACNB0808C28_13UN_ACNB10093C34_13UN_AC

    444444444444444644668444444668866688

    101012666

    10101212668

    121216888

    161688

    10

    2,42,32,32,32,63,13,12,52,52,5333

    3,63,6644558

    3,83,83,844466

    7,67,64,54,54,588

    1010125,85,85,810101212667

    121216888

    161688

    9,3

    333333333333333433334333333333333333445333444433344533355333

    5,485,47,3

    8,576,037,419,536,758,339,927,549,13

    11,518,33

    10,7213,19,52

    12,2510,4314,0617,69

    911,1113,2310,0512,1715,3513,2317,4615,3520,6410,814,6

    17,1518,4123,5

    20,9627,3128,5713,4117,6421,8723,2830,3426,1133,1616,6721,4326,1930,9640,4835,7219,0524,4929,9435,3846,2622,4728,3334,19

    50505050505050505050505050505063505063636350505050505063636376636363637676768363636376

    10083

    100636376

    100100100637676

    1001207676

    100

    444040404036363232323232323232322828282828242424242424242424242020202020202020181818181818181616161616161414141414131313

    No.5 (1,5xD)No.5 (2xD)

    No.5 (2,5xD)

    No.6 (1,5xD)No.6 (2xD)

    No.6 (2,5xD)No.8 (1,5xD)No.8 (2xD)

    No.8 (2,5xD)

    No.10 (1,5xD)No.10 (2xD)

    No.10 (2,5xD)No.12 (1,5xD)No.12 (2xD)

    No.12 (2,5xD)

    1/4 (1,5xD)1/4 (2xD)

    1/4 (2,5xD)

    5/16 (1,5xD)5/16 (2xD)

    5/16 (2,5xD)

    3/8 (1,5xD)3/8 (2xD)

    3/8 (2,5xD)

    7/16 (1,5xD)7/16 (2xD)

    7/16 (2,5xD)

    1/2 (1,5xD)1/2 (2xD)

    1/2 (2,5xD)

    No.5 (1,5xD)

    No.6 (1,5xD)No.8 (1,5xD)No.8 (2xD)

    No.10 (1,5xD)No.10 (2xD)

    No.12 (1,5xD)No.12 (2xD)

    1/4 (1,5xD)1/4 (2xD)

    5/16 (1,5xD)5/16 (2xD)

    3/8 (1,5xD)3/8 (2xD)

    7/16 (1,5xD)7/16 (2xD)

    1/2 (1,5xD)1/2 (2xD)

    9/16 (1,5xD)9/16 (2xD)

    5/8 (1,5xD)5/8 (2xD)

    3/4 (1,5xD)3/4 (2xD)

    7/8 (1,5xD)7/8 (2xD)

    Part Numberd

    mmD

    mmCuttingedgesUNFUNC

    PitchTPI

    lmm

    Lmm

    INTERNALUNIFIEDUN

  • 13

    SmiCutTM

    S T S

    UNIFIEDUNNB1010C24_12UN_ACNB1010C30_12UN_ACNB1616E43_12UN_ACNB1010C26_11UN_ACNB1010C35_11UN_ACNB12117C42_11UN_ACNB1212C31_10UN_ACNB1212C41_10UN_ACNB1616C38_9UN_ACNB1616C49_9UN_ACNB1616C42_8UN_ACNB1616C55_8UN_ACNB2020D49_8UN_ACNB2020C52_7UN_ACNB2525C61_6UN_AC

    101016101012121216161616202025

    1010161010

    11,7121216161616202025

    335333333333433

    24,3430,6943,3926,5535,7942,7231,7541,9138,1

    49,3942,8655,5649,2152,6161,38

    7610010076

    100100100100100120100120120120130

    12121211111110109988876

    9/16 (1,5xD)9/16 (2xD)

    5/8 (1,5xD)5/8 (2xD)

    5/8 (2,5xD)3/4 (1,5xD)

    3/4 (2xD)7/8 (1,5xD)

    7/8 (2xD)1 (1,5xD)1 (2xD)

    11/8 - 11/4 (1,5xD)13/8 - 11/2 (1,5xD)

    Part Numberd

    mmD

    mmCuttingedgesUNFUNC

    PitchTPI

    lmm

    Lmm

    INTERNAL

    SmiCut produce Solid Carbide Thread Mills with pitches up to 6,0 mm (4TPI).

    TiAlCN SOLID CARBIDE THREAD MILLS

    XB0606C12_27NPSF_ACXB0808C16_18NPSF_ACXB1212D22_14NPSF_ACXB1616D29_11.5NPSF_AC

    68

    1216

    68

    1216

    3344

    12,7016,2322,6829,82

    636383

    100

    NPSF PIPE THREADNPSFPart Number

    dmm

    Dmm

    Cuttingedges

    1/16 - 1/81/4 - 3/81/2 - 3/4

    1

    Standard lmmL

    mm271814

    11,5

    PitchTPI

    INTERNAL / EXTERNAL

    XB0606C10_28BSPT_ACXB0808C15_19BSPT_ACXB1212D20_14BSPT_ACXB1616D31_11BSPT_AC

    XB0808C21_20PG_ACXB1010C27_18PG_ACXB1212D31_16PG_AC

    68

    1216

    81012

    68

    1216

    81012

    3344

    334

    10,4315,3720,8631,17

    20,9627,5230,96

    636383

    100

    637683

    BSPT PIPE THREAD

    STEEL CONDUIT THREAD DIN 40430

    BSPT

    PG

    Part Number

    Part Number

    dmm

    dmm

    Dmm

    Dmm

    Cuttingedges

    Cuttingedges

    G 1/16 - 1/8RC 1/4 - 3/8RC 1/2 - 7/8RC 1 - 2

    Pg 7Pg 9 - 16Pg 21- 48

    Standard

    Standard

    lmm

    lmm

    Lmm

    Lmm

    28191411

    201816

    PitchTPI

    PitchTPI

    XB0606C10_28W_ACXB0808C15_19W_ACXB1010D22_19W_ACXB1212D20_14W_ACXB1212D28_14W_ACXB1616E28_14W_ACXB1212C26_11W_ACXB1616D40_11W_ACXB2020E49_11W_AC

    68

    10121216121620

    68

    10121216121620

    334445345

    10,4315,3722,0620,8628,1228,1226,5540,4149,65

    6363768383

    10083

    100120

    WHITWORTH PIPE THREADGPart Number

    dmm

    Dmm

    Cuttingedges

    G 1/16 - 1/8G 1/4 - 3/8G 1/4 - 3/8G 1/2 - 7/8G 1/2 - 7/8G 1/2 - 7/8G 1 - 1 1/2

    G 1 - 3G 1

    Standard lmmL

    mm281919141414111111

    PitchTPI

    INTERNAL / EXTERNAL

    INTERNAL / EXTERNAL

    INTERNAL / EXTERNAL

    continue

  • 14

    SmiCutTM

    S T S

    SOLID CARBIDE THREAD MILLS TiAlCN

    Tapered End Mills for NPT/NPTF/BSPTl

    d

    L

    D

    147'

    45

    l2FCTiAlN coatedMicrograin CarbideToleranceD 5,0 - 17,0 +0 / -0,050ShankCylindrical h6, DIN6535 HAFlute30 right hand spiralField of applicationBefore Thread Milling of NPT/NPTF/BSPT

    NPT0605D16_FCNPT10085D24_FCNPT1614D32_FCNPT2017D48_FC

    4444

    58,51417

    16243248

    6376

    100120

    Part Number CuttingedgesD

    mm6

    101620

    dmm

    lmm

    1,01,523

    l2mm

    Lmm

    Premilling of conical holes result in longer tool life

    of thread mill

    147Chamfering of the thread

    NPT334444

    10,8216,2322,6822,6829,8242,86

    636383

    100100100

    Part Numberd

    mmD

    mmCuttingedges

    lmm

    Lmm

    33444

    10,8216,2322,6829,8242,86

    636383

    100100

    Part Numberd

    mmD

    mmCuttingedges

    lmm

    Lmm

    XB0606C10_27NPT_ACXB0808C16_18NPT_ACXB1212D22_14NPT_ACXB1616D22_14NPT_ACXB1616D29_11.5NPT_ACXB2020D42_8NPT_AC

    68

    12161620

    68

    12161620

    NPT PIPE THREAD

    1/16 - 1/81/4 - 3/81/2 - 3/4

    3/41 - 2

    2 1/2

    Standard

    NPTFXB0606C10_27NPTF_ACXB0808C16_18NPTF_ACXB1212D22_14NPTF_ACXB1616D29_11.5NPTF_ACXB2020D42_8NPTF_AC

    68

    121620

    68

    121620

    NPTF DRYSEAL PIPE THREAD

    1/16 - 1/81/4 - 3/81/2 - 3/41 - 2

    2 1/2

    Standard

    27181414

    11,58

    271814

    11,58

    PitchTPI

    PitchTPI

    INTERNAL / EXTERNAL

    INTERNAL / EXTERNAL

  • 15

    SmiCutTM

    S T S

    TiAlCN SOLID CARBIDE THREAD MILLSwith Chamfer

    NF06023C5_0.5ISO_ACNF06023C6_0.5ISO_ACNF06023C8_0.5ISO_ACNF06023C9_0.5ISO_ACNF0603C7_0.7ISO_ACNF0603C8_0.7ISO_ACNF0603C10_0.7ISO_ACNF0603C12_0.7ISO_ACNF06038C8_0.8ISO_ACNF06038C10_0.8ISO_ACNF06038C13_0.8ISO_ACNF06038C16_0.8ISO_ACNF08045C10_1.0ISO_ACNF08045C13_1.0ISO_ACNF08045C16_1.0ISO_ACNF1006C14_1.25ISO_ACNF1006C18_1.25ISO_ACNF1006C21_1.25ISO_ACNF12075C17_1.5ISO_ACNF12075C21_1.5ISO_ACNF12075C27_1.5ISO_ACNF1409C20_1.75ISO_ACNF1409C27_1.75ISO_ACNF1409C32_1.75ISO_AC

    666666666666888

    101010121212141414

    2,32,32,32,33333

    3,83,83,83,84,54,54,5666

    7,57,57,5999

    333333333333333333333333

    0,50,50,50,50,70,70,70,70,80,80,80,81,01,01,0

    1,251,251,251,51,51,5

    1,751,751,75

    5,256,758,259,757,358,75

    10,8512,95

    8,410,813,216,410,513,516,5

    14,3718,1221,8717,2521,7527,7520,1227,1232,37

    636363636363636363636363636363767676838383898989

    METRICMPart Number

    dmm

    Dmm

    Cuttingedges

    Pitchmm

    M3 (1,5xD)M3 (2xD)M3 (2,5xD)M3 (3xD)M4 (1,5xD)M4 (2xD)M4 (2,5xD)M4 (3xD)M5 (1,5xD)M5 (2xD)M5 (2,5xD)M5 (3xD)M6 (1,5xD)M6 (2xD)M6 (2,5xD)M8 (1,5xD)M8 (2xD)M8 (2,5xD)M10 (1,5xD)M10 (2xD)M10 (2,5xD)M12 (1,5xD)M12 (2xD)M12 (2,5xD)

    Mcoarse

    lmm

    5,857,358,85

    10,358,29,6

    11,713,89,4

    11,814,217,4

    11,7514,7517,75

    1619,7523,5

    19,2523,7529,7522,529,5

    34,75

    l2mm

    Lmm

    INTERNAL

    ACTiAlCN coatedMicrograin CarbideToleranceThe theoretical external diameter ofthe cutter is lasermarked on the tool.ShankCylindrical h6, DIN6535 HAFlute15 right hand spiralField of applicationThread Milling of all types of steel

    l

    d

    L

    D

    l2 45

    Chamfering of the thread

  • 16

    SmiCutTM

    S T S

    SOLID CARBIDE THREAD MILLS TiAlCNThreadBurr with Internal Coolant

    NBK04038C8_0.8ISO_ACNBK04038C10_0.8ISO_ACNBK04038C13_0.8ISO_ACNBK06045C10_1.0ISO_ACNBK06045C13_1.0ISO_ACNBK06045C16_1.0ISO_ACNBK0808D17_1.0ISO_ACNBK0606C14_1.25ISO_ACNBK0606C18_1.25ISO_ACNBK0606C21_1.25ISO_ACNBK08075C17_1.5ISO_ACNBK08075C21_1.5ISO_ACNBK08075C27_1.5ISO_ACNBK08075C32_1.5ISO_ACNBK1212D29_1.5ISO_ACNBK1616F35_1.5ISO_ACNBK0808C20_1.75ISO_ACNBK0808C27_1.75ISO_ACNBK1009C20_1.75ISO_ACNBK1009C27_1.75ISO_ACNBK1009C32_1.75ISO_ACNBK1009C37_1.75ISO_ACNBK1010C23_2.0ISO_ACNBK1010C31_2.0ISO_ACNBK1212D27_2.0ISO_ACNBK1212D35_2.0ISO_ACNBK1212D43_2.0ISO_ACNBK1212C51_2.0ISO_ACNBK1616E39_2.0ISO_ACNBK1414D33_2.5ISO_ACNBK1414D43_2.5ISO_ACNBK1615D53_2.5ISO_ACNBK1616C40_3.0ISO_ACNBK1616C52_3.0ISO_ACNBK2020C50_3.5ISO_ACNBK2020C64_3.5ISO_AC

    44466686668888

    121688

    101010101010121212121614141616162020

    3,83,83,84,54,54,58666

    7,57,57,57,51216889999

    1010121212121614141516162020

    333333333333334633333333444354443333

    0,80,80,81,01,01,01,0

    1,251,251,251,51,51,51,51,51,5

    1,751,751,751,751,751,752,02,02,02,02,02,02,02,52,52,53,03,03,53,5

    8,410,813,210,513,516,517,5

    14,3718,1221,8717,2521,7527,7532,2529,2535,2520,1227,1220,1227,1232,3737,62

    23312735435139

    33,7543,7553,7540,552,5

    50,7564,75

    5050506363637663636376767676

    1001207676

    100100100100100100100100100100120100100120120120150150

    METRICMPart Number

    dmm

    Dmm

    Cuttingedges

    Pitchmm

    M10 M10 M10 M10 M12 M12 M12 M12 M16 M20

    M18 M18 M18 M18 M18 M18 M20

    M30 M30

    Mfine

    M5 (1,5xD)M5 (2xD)M5 (2,5xD)M6 (1,5xD)M6 (2xD)M6 (2,5xD)

    M8 (1,5xD)M8 (2xD)M8 (2,5xD)M10 (1,5xD)M10 (2xD)M10 (2,5xD)M10 (3xD)

    M12 (1,5xD)M12 (2xD)M12 (1,5xD)M12 (2xD)M12 (2,5xD)M12 (3xD)M14 (1,5xD)M14 (2xD)M16 (1,5xD)M16 (2xD)M16 (2,5xD)M16 (3xD)

    M20 (1,5xD)M20 (2xD)M20 (2,5xD)M24 (1,5xD)M24 (2xD)M30 (1,5xD)M30 (2xD)

    Mcoarse

    lmm

    Lmm

    INTERNAL

    ACTiAlCN coatedMicrograin CarbideToleranceThe theoretical external diameter ofthe cutter is lasermarked on the tool.ShankCylindrical h6, DIN6535 HAFlute15 right hand spiralField of applicationThread Milling of all types of steel

    l

    d

    L

    D

  • 17

    SmiCutTM

    S T S

    TiAlCN SOLID CARBIDE THREAD MILLSThreadBurr with Internal Radial Coolant

    METRICM

    ACTiAlCN coatedMicrograin CarbideToleranceThe theoretical external diameter ofthe cutter is lasermarked on the tool.ShankCylindrical h6, DIN6535 HAFlute15 right hand spiralField of applicationThread Milling of all types of steel

    l

    d

    L

    D

    NBT0808D17_1.0ISO_ACNBT0606C18_1.25ISO_ACNBT08075C21_1.5ISO_ACNBT1212D29_1.5ISO_ACNBT0808C27_1.75ISO_ACNBT1009C27_1.75ISO_ACNBT1010C31_2.0ISO_ACNBT1212D35_2.0ISO_ACNBT1616E39_2.0ISO_AC

    868

    128

    10101216

    86

    7,51289

    101216

    433433345

    1,01,251,51,5

    1,751,752,02,02,0

    17,518,1221,7529,2527,1227,12

    313539

    767676

    10076

    100100100100

    Part Numberd

    mmD

    mmCuttingedges

    Pitchmm

    M10 M10 M12 M16

    M18 M18 M20

    Mfine

    M8 (2xD)M10 (2xD)

    M12 (2xD)M12 (2xD)M14 (2xD)M16 (2xD)

    Mcoarse

    lmm

    Lmm

    INTERNAL

    XBT0606C10_28W_ACXBT1010D22_19W_ACXBT1212D28_14W_ACXBT1616D40_11W_AC

    6101216

    6101216

    3444

    10,4322,0628,1240,41

    76100100100

    WHITWORTH PIPE THREAD GPart Number

    dmm

    Dmm

    Cuttingedges

    G 1/16 - 1/8G 1/4 - 3/8G 1/2 - 7/8G 1 - 3

    Standard lmmL

    mm28191411

    PitchTPI

    INTERNAL / EXTERNAL

  • 18

    SmiCutTM

    S T S

    SOLID CARBIDE THREAD MILLS TiAlCNMicro, one tooth

    NS03007C1.7_P60_LCNS03007C2.5_P60_LCNS03007C3.2_P60_LCNS03009C2.0_P60_LCNS03009C2.9_P60_LCNS03009C3.9_P60_LCNS03010C2.2_P60_LCNS03010C3.3_P60_LCNS03010C4.4_P60_LCNS03011C2.5_P60_LCNS03011C3.6_P60_LCNS03011C5.1_P60_LCNS03013C2.8_P60_LCNS03013C4.2_P60_LCNS03013C5.6_P60_LCNS03015C3.8_P60_ACNS03015C5.4_P60_ACNS03019C4.3_P60_ACNS03019C6.2_P60_ACNS03021C4.9_P60_ACNS03021C7.1_P60_ACNS03023C5.4_P60_ACNS03023C7.8_P60_ACNS03026C6.1_P60_ACNS03026C8.7_P60_ACNS0303C7.1_P60_ACNS0303C10.2_P60_ACNS04036C8.3_P60_ACNS04036C12.0_P60_ACNS0404C10.0_P60_ACNS0404C14.5_P60_AC

    3333333333333333333333333334444

    0,70,70,70,90,90,9

    1,031,031,031,161,161,161,351,351,351,51,51,91,92,12,12,32,32,62,633

    3,63,644

    3333333333333333333333333333333

    M1M1M1

    M1,2 M1,2M1,2M1,4M1,4M1,4M1,6M1,6M1,6M1,8M1,8M1,8

    M2-M2,2M2-M2,2

    M2,5M2,5

    M3M3

    M3,5M3,5M4M4

    M4,5M4,5

    M5-M6M5-M6

    1,72,53,22

    2,93,92,33,34,42,53,65,12,84,25,63,85,44,36,24,97,15,47,86,18,77,1

    10,28,31210

    14,5

    39393939393939393939393939393939393939393939393939393950505050

    V-PROFILE 6060Part Number

    dmm

    Dmm

    Cuttingedges

    Mcoarse

    No.0-80No.0-80No.0-80

    No.1No.1No.1No.2No.2No.3No.3No.4No.4No.5No.5No.6No.6No.8No.8

    No.10No.10No.12No.12

    UNCUNF

    M1M1M1

    M1,2 M1,2M1,2M1,4M1,4M1,4M1,4M1,4M1,4M1,6M1,6M1,6

    M1,8-M2M1,8-M2

    M2,2M2,2M2,5M2,5

    M3M3

    M3,5-M4M3,5-M4

    M4,5M4,5

    M5-M6M5-M6

    Mfine

    lmm

    Lmm

    INTERNAL

    AC / LCTiAlCN / AlCrN coatedMicrograin CarbideToleranceD 1,0 - 4,0 +0 / -0,050ShankCylindrical h6, DIN6535 HAFlute15 right hand spiralField of applicationThread Milling of all types of steel

    l

    d

    L

    D

  • 19

    SmiCutTM

    S T S

    TiAlCN SOLID CARBIDE THREAD MILLSMicro, two teeth

    NM03015C3_0.4ISO_ACNM03015C5_0.4ISO_ACNM03016C3_0.45ISO_ACNM03016C5_0.45ISO_ACNM03019C4_0.45ISO_ACNM03019C6_0.45ISO_ACNM03023C5_0.5ISO_ACNM03023C7_0.5ISO_ACNM03026C6_0.6ISO_ACNM03026C8_0.6ISO_ACNM0303C7_0.7ISO_ACNM0303C10_0.7ISO_ACNM04038C9_0.8ISO_ACNM04038C12_0.8ISO_ACNM06045C10_1.0ISO_ACNM06045C14_1.0ISO_ACNM0606C14_1.25ISO_ACNM0606C19_1.25ISO_AC

    333333333333446666

    1,51,51,61,61,91,92,32,32,62,633

    3,83,84,54,566

    333333333333333333

    0,40,4

    0,450,450,450,450,50,50,60,60,70,70,80,81,01,0

    1,251,25

    3,45

    3,85,44,26,15

    7,36

    8,57

    109

    12,110

    14,514

    19,3

    393939393939393939393939505063636363

    METRICMPart Number

    dmm

    Dmm

    Cuttingedges

    Pitchmm

    M2 (1,5xD)M2 (2,25xD)M2,2 (1,5xD)M2,2 (2,25xD)M2,5 (1,5xD)M2,5 (2,25xD)M3 (1,5xD)M3 (2,25xD)M3,5 (1,5xD)M3,5 (2,25xD)M4 (1,5xD)M4 (2,25xD)M5 (1,5xD)M5 (2,25xD)M6 (1,5xD)M6 (2,25xD)M8 (1,5xD)M8 (2,25xD)

    Mcoarse

    lmm

    Lmm

    INTERNAL

    ACTiAlCN coatedMicrograin CarbideToleranceThe theoretical external diameter ofthe cutter is lasermarked on the tool.ShankCylindrical h6, DIN6535 HAFlute15 right hand spiralField of applicationThread Milling of all types of steel

    l

    d

    L

    D

  • 20

    SmiCutTM

    S T S

    d

    l

    D

    L

    L2

    SR0012F14SR0014H14SR0017H14SR0018H21SR0021H21SR0025K21SR0029J30SR0031M30SR0038M30SR0048M40SR0048R40

    1414142121213030304040

    2025303040-

    50--

    78-

    7585858594

    125110150150153210

    1214,5171821252931384848

    11111111111

    Part Number lmmL2

    mmL

    mmD

    mm2020202020202525324040

    dmm

    Cuttingedges

    d

    l

    D

    L

    L2

    SR0020H14-2SR0030J21-2SR0040L30-2SR0050M40-2

    14213040

    41527078

    93108130153

    20304050

    2222

    Part Number lmmL2

    mmL

    mmD

    mm20253240

    dmm

    Cuttingedges

    with Two Pockets

    THREAD MILLING CUTTERSwith One Pocket

  • 21

    SmiCutTM

    S T S

    Spare Parts

    14213040

    S14S21S30S40

    2,503,203,903,90

    K14K21K30K40

    Insertmm

    Screwto insert

    Torxkey

    PriceEUR

    d

    l

    D

    L

    SR0013J14CSR0015K14CSR0021M21CSR0027S30CSR0033T30C

    1414213030

    150175200260270

    1315212733

    11111

    Part Number lmmL

    mmD

    mm1012162025

    dmm

    Cuttingedges

    d

    l

    D

    L

    SR0063C21-5SR0063C30-4SR0080D30-4SR0100D30-4SR0080D40-4SR0100E40-4

    213030304040

    505055606570

    636380

    10080

    100

    544444

    Part Number lmmL

    mmD

    mm222227322732

    dmm

    Cuttingedges

    with Multi Pockets

    THREAD MILLING CUTTERSwith Carbide Shank

  • 22

    SmiCutTM

    S T S

    14I_1.0ISO_FC21I_1.0ISO_FC14I_1.5ISO_FC21I_1.5ISO_FC30I_1.5ISO_FC14I_2.0ISO_FC21I_2.0ISO_FC30I_2.0ISO_FC40I_2.0ISO_FC14I_2.5ISO_FC21I_3.0ISO_FC30I_3.0ISO_FC40I_3.0ISO_FC21I_3.5ISO_FC30I_4.0ISO_FC40I_4.0ISO_FC30I_4.5ISO_FC30I_5.0ISO_FC40I_6.0ISO_FC

    14211421301421304014213040213040303040

    1421

    13,5213014203040

    12,5213039212840273036

    3,14,73,14,75,53,14,75,56,33,14,75,56,34,75,56,35,55,56,3

    7,5127,512167,51216207,5121620121620161620

    1,01,01,51,51,52,02,02,02,02,53,03,03,03,54,04,04,55,06,0

    2222222222222222212

    METRICMPart Number

    lmm

    Lmm

    Tmm

    Hmm

    Pitchmm

    M16 M24 M16 M24 M35 M18 M24 M36 M56

    M30 M40 M58

    M42 M64

    M72

    Mfine

    M16

    M18-M22M24

    M30-M33M36-M39

    M42-M45M48-M52

    Mcoarse

    Cuttingedges

    H

    L

    l

    T

    INTERNAL

    THREAD MILLING INSERTS

    14X_19W_FC14X_14W_FC21X_14W_FC14X_11W_FC21X_11W_FC30X_11W_FC40X_11W_FC

    14142114213040

    3,13,14,73,14,75,56,3

    7,57,5127,5121620

    2221222

    WHITWORTH PIPE THREADGPart Number

    Lmm

    13,3712,7

    19,9613,8520,7830,0239,25

    lmm

    Tmm

    Hmm

    G 3/8G 1/2 - 5/8G 3/4 - 7/8

    G 1G 1

    G 1 1/8G 2

    Standard Cuttingedges19141411111111

    PitchTPI

    14X_19BSPT_FC14X_14BSPT_FC21X_14BSPT_FC21X_11BSPT_FC30X_11BSPT_FC40X_11BSPT_FC

    BSPT PIPE THREADBSPTPart Number

    Rc 3/8Rc 1/2 - 5/8Rc 3/4 - 7/8

    Rc 1Rc 1 1/8Rc 2

    Standard

    191414111111

    PitchTPI

    141421213040

    3,13,14,74,75,56,3

    7,57,512121620

    111111

    Lmm

    13,3712,7

    19,9620,7830,0239,25

    lmm

    Tmm

    Hmm

    Cuttingedges

    INTERNAL / EXTERNAL

    INTERNAL / EXTERNAL

    14X_18PG_FC21X_18PG_FC21X_16PG_FC30X_16PG_FC

    STEEL CONDUIT THREAD DIN 40430PGPart Number

    Pg 9 - 16Pg 13,5 - 16Pg 21 - 48Pg 29 - 48

    Standard

    18181616

    PitchTPI

    14212130

    3,14,74,75,5

    7,5121216

    2222

    Lmm

    14,1121

    20,6430

    lmm

    Tmm

    Hmm

    Cuttingedges

    INTERNAL / EXTERNAL

    TiAlN

  • 23

    SmiCutTM

    S T S

    UN14I_32UN_FC14I_28UN_FC14I_24UN_FC14I_20UN_FC21I_20UN_FC30I_20UN_FC14I_18UN_FC21I_18UN_FC30I_18UN_FC14I_16UN_FC21I_16UN_FC30I_16UN_FC40I_16UN_FC14I_14UN_FC21I_14UN_FC14I_12UN_FC21I_12UN_FC30I_12UN_FC40I_12UN_FC14I_10UN_FC21I_8UN_FC30I_8UN_FC40I_8UN_FC21I_7UN_FC30I_6UN_FC40I_6UN_FC30I_5UN_FC40I_4UN_FC

    5/83/4 - 1

    1

    11/8-15/811/8-15/811/4-15/8

    UNIFIEDPart NumberUNEF

    5/8

    3/4

    7/87/8

    1-11/211/8-11/2

    11/2

    UNF

    3/4

    11/8-11/411/2

    13/43 - 4

    UNC

    322824202020181818161616161414121212121088876654

    PitchTPI

    14141414213014213014213040142114213040142130402130403040

    3,13,13,13,14,75,53,14,75,53,14,75,56,33,14,73,14,75,56,33,14,75,56,34,75,56,35,56,3

    7,57,57,57,512167,512167,51216207,5127,51216207,51216201216201620

    2222222222222222222222222212

    Lmm

    13,4913,6113,7513,9720,3229,2114,1121,1729,6312,7

    20,6430,1639,6912,7

    19,9612,7

    21,1229,6340,2212,7

    19,0528,5738,1

    21,7729,6338,1

    30,4838,1

    lmm

    Tmm

    Hmm

    Cuttingedges

    INTERNAL

    14X_18NPT_FC14X_14NPT_FC21X_14NPT_FC21X_11.5NPT_FC30X_11.5NPT_FC30X_8NPT_FC40X_8NPT_FC

    NPT PIPE THREADNPTPart Number

    3/81/2 - 5/83/4 - 7/8

    11 1/4 - 2 2 1/2 2 1/2

    Standard

    181414

    11,511,5

    88

    PitchTPI

    14X_18NPTF_FC14X_14NPTF_FC21X_14NPTF_FC21X_11.5NPTF_FC30X_11.5NPTF_FC30X_8NPTF_FC40X_8NPTF_FC

    NPTF DRYSEAL PIPE THREADNPTFPart Number

    3/81/2 - 5/83/4 - 7/8

    11 1/4 - 2 2 1/2 2 1/2

    Standard

    181414

    11,511,5

    88

    PitchTPI

    14142121303040

    3,13,14,74,75,55,56,3

    7,57,51212161620

    1111111

    Lmm

    12,712,7

    19,9619,8828,7128,5838,1

    lmm

    Tmm

    Hmm

    Cuttingedges

    14142121303040

    3,13,14,74,75,55,56,3

    7,57,51212161620

    1111111

    Lmm

    12,712,7

    19,9619,8828,7128,5838,1

    lmm

    Tmm

    Hmm

    Cuttingedges

    INTERNAL / EXTERNAL

    INTERNAL / EXTERNAL

    THREAD MILLING INSERTS

    Part number with I is for internal threadprofile.Part number with X is for in- and external thread profile.For external profile indicate E instead of I. The price is 10% higher for E.

    TiAlN

  • 24

    SmiCutTM

    S T S

    d

    L2

    D

    L

    l

    SRH23-2SRH32-5SRH45-6

    273237

    5060-

    233245

    256

    Part Number lmmL2

    mmD

    mm253232

    dmm

    Cuttingedges

    110130130

    Lmm

    THREAD MILLING CUTTERSSpiral Fluted

  • 25

    SmiCutTM

    S T S

    d

    l

    D

    L

    SRH32-5MSRH45-6MSRH63-9

    323738

    526050

    324563

    569

    Part Number lmmL

    mmD

    mm162222

    dmm

    Cuttingedges

    Spare Parts

    H23H32H45H63

    S23S32S45S63

    3,203,903,903,90

    K21K22K40K40

    Insertmm

    Screwtill insert

    Torxkey

    PriceEUR

    THREAD MILLING CUTTERSSpiral Fluted

  • 26

    SmiCutTM

    S T S

    l L

    THREAD MILLING INSERTS TiAlNSpiral Fluted

    H23I_1.0ISO_FCH23I_1.5ISO_FCH32I_1.5ISO_FCH45I_1.5ISO_FCH63I_1.5ISO_FCH23I_2.0ISO_FCH32I_2.0ISO_FCH45I_2.0ISO_FCH63I_2.0ISO_FCH23I_3.0ISO_FCH32I_3.0ISO_FCH45I_3.0ISO_FCH63I_3.0ISO_FCH23I_3.5ISO_FCH23I_4.0ISO_FCH32I_4.0ISO_FCH45I_4.0ISO_FCH63I_4.0ISO_FCH32I_4.5ISO_FCH32I_5.0ISO_FCH45I_5.5ISO_FCH45I_6.0ISO_FCH63I_6.0ISO_FC

    2727323738273237382732373827273237383232373738

    2727

    31,536

    37,52632363827303636

    24,524323636

    31,530333636

    1,01,51,51,51,52,02,02,02,03,03,03,03,03,54,04,04,04,04,55,05,56,06,0

    11111111111111111111111

    METRICMPart Number

    lmm

    Lmm

    Pitchmm

    M27 M27 M36 M52 M68 M27 M36 M52 M68 M30 M39 M52 M72 M30 M36 M42 M56 M72 M42 M48 M56 M64 M80

    Mfine

    Cuttingedges

    INTERNAL

    H23X_14W_FCH23X_11W_FCH32X_11W_FCH45X_11W_FCH63X_11W_FC

    2727323738

    11111

    WHITWORTH PIPE THREADGPart Number

    Lmm

    25,425,4

    30,0236,9536,95

    lmm

    G 7/8G 1

    G 1 1/8G 1 3/4G 2 1/2

    Standard Cuttingedges1411111111

    PitchTPI

    H23X_11BSPT_FCH32X_11BSPT_FCH45X_11BSPT_FCH63X_11BSPT_FC

    27323738

    1111

    BSPT PIPE THREADBSPTPart Number

    Lmm

    25,430,0236,9536,95

    lmm

    Rc 1Rc 1 1/8Rc 1 3/4Rc 2 1/2

    Standard Cuttingedges11111111

    PitchTPI

    INTERNAL / EXTERNAL

    INTERNAL / EXTERNAL

  • 27

    SmiCutTM

    S T S

    TiAlN THREAD MILLING INSERTS

    H23I_24UN_FCH23I_20UN_FCH32I_20UN_FCH23I_18UN_FCH32I_18UN_FCH23I_16UN_FCH32I_16UN_FCH45I_16UN_FCH63I_16UN_FCH23I_12UN_FCH32I_12UN_FCH45I_12UN_FCH63I_12UN_FCH23I_8UN_FCH32I_8UN_FCH45I_8UN_FCH63I_8UN_FCH23I_7UN_FCH32I_6UN_FCH45I_6UN_FCH63I_6UN_FCH32I_5UN_FC

    27273227322732373827323738273237382732373832

    26,4626,6731,7526,8131,0426,9931,7536,5138,125,4

    31,7535,9838,125,4

    31,7534,9338,125,4

    29,6333,9738,1

    30,48

    24202018181616161612121212888876665

    1111111111111111111111

    UNIFIEDUNPart Number

    lmm

    Lmm

    PitchTPI

    1 1 1/16 1 3/8 1 1/16 1 3/8 1 1/8 1 1/2 2 2 5/8 1 1/8 1 1/2 2 2 3/4 1 1/8 1 1/2 2 1/8 2 3/4 1 1/4 1 5/8 2 1/8 2 7/8 1 3/4

    Standard CuttingedgesINTERNAL

    H23X_11.5NPT_FCH32X_11.5NPT_FCH45X_11.5NPT_FCH45X_8NPT_FCH63X_8NPT_FC

    2732373738

    11111

    NPT PIPE THREADNPTPart Number

    Lmm

    26,530,9235,3434,9338,1

    lmm

    1 - 211/4 - 2

    221/2

    3

    Standard Cuttingedges11,511,511,5

    88

    PitchTPI

    INTERNAL / EXTERNAL

    H23X_11.5NPTF_FCH32X_11.5NPTF_FC

    2732

    11

    NPTF PIPE THREADNPTFPart Number

    Lmm

    26,530,92

    lmm

    1 - 211/4 - 2

    Standard Cuttingedges11,511,5

    PitchTPI

    INTERNAL / EXTERNAL