Post on 02-Mar-2019
TERM 1GRADE 10 – TASK SHEET 1
Networking and IOT
Name: Date:
SIS No Grade
Group: N/A (Not Applicable) Start Time:
Signed Finishing Time:
Picture 1
TASK SHEET 1OBJECTIVEFrom the book ‘Networking and IOT’ you will be applying your theory knowledge gained to achieve the following Student Learning Outcomes (SLOs):
From ‘Unit 1 – Introduction to Computer Networks’: describe a computer network explain what information security is describe different types of hackers explain what a network topology is discuss the advantages and disadvantages of computer networks list computer networking media explain transmission bandwidth and duplex
From ‘Unit 2 – Network Models, Hardware, Protocols and Binary’: discuss the differences between peer-to-peer and client-server network models. state the purpose of network hardware. describe a network protocol. explain how data packets move across a network.
You will then practically design a LAN using network media and devices such as a switch, PCs and laptops and check the bandwidth between the devices.
EQUIPMENT REQUIREMENTSTerm book; pen/pencil, laptop/computer; Cisco Packet Tracer Software 7.x.
TASK INTRODUCTIONIn Part A, you will answer various theory questions covering unit 1 (Introduction to Computer Networks) of the book.In Part B, you will answer various theory questions covering unit 2 (Network Models, Hardware and Protocols) of the book.In Part C, you will design a LAN using a switch, two PCs and two laptops using the network simulating program, Cisco Packet Tracer
TASK GUIDELINES1. Please fill in the answers in the spaces provided. There is no word limit for your
documentation2. Show your answers to your teacher.
Page 3 of 18
TASK SHEET 1 – PART A (Unit 1) – WORK PLAN
# Work Steps Step Completion & Values Remarks
A1 What is a computer network?
A computer network is a ___________________________________________________________________________________________________________________________
A2 Look at the following sentences. Do you think they are true or false? (circle your answer)
a) A LAN is a type of network covering a large area such as the UAE.
True / False
b) A grade 9 student can use any computer in her Computer Science lesson because of the network. This is a bad thing for networks.
True / False
c) Using the network, Muhammed's Computer Science teacher can see if he is working. This is a drawback to networks.
True / False
d) You can use a network to easily work with people who are far away.
True / False
Why do you think the sentence is True or False?
a) ___________________________________________________________________________________________________________________________
b) ___________________________________________________________________________________________________________________________
c) ___________________________________________________________________________________________________________________________
d) ___________________________________________________________________________________________________________________________
A3 You have learnt in unit 1 about information security.
Explain what information security is.
Information Security: ____________________________________________________________________________________________________________________________________________________________________
A4 You have learnt that one of the drawbacks of
Black Hat Hacker: __________________________________________________________________________________________
Page 4 of 18
networks is hacking.
Two types of hacker are Black Hat Hacker and White Hat Hacker.
Describe each type.
_________________________________
White Hat Hacker: ___________________________________________________________________________________________________________________________
A5 A topology is the way in which the computers and other devices in a network are arranged. Name three types of network topologies.
1)
2)
3)
Draw two network topologies and state their names:
Topology Name 1: __________________
Topology Name 2: ___________________
A6 Computer networks can be used in more than one way.
State two ways in which computer networks can be used.
Way 1: ___________________________________________________________________________________________________________________________
Way 2: ___________________________________________________________________________________________________________________________
A7 Sometimes it is an advantage to NOT connect a computer to a network.
Write any 1 advantage, and your reason why.
Advantage:___________________________________________________________________________________________________________________________
Reason:___________________________________________________________________________________________________________________________
A8 Fill in the correct word for the sentence.
A transmission ______________ is the material used to connect the devices in a network.
a) switchb) router
Page 5 of 18
c) mediumd) full-duplex
A9 Decide if the sentence is true or false.
Half-duplex is when computers that are connected can transmit and receive at the same time.
Answer: _______________
A10
Answer the correct word for the sentence.
This is an example of how bandwidth is measured.
a) Km/hb) Mbpsc) Gigametres per secondd) bandwidth
Answer: ______________
A11
In the table, tick all the examples of a network medium.
Description Network medium?Copper
Wi-Fi signalGlass
Twisted-pair copper cableLight
Fibre optic cable
TASK SHEET 1 – PART A – EVALUATION
Ⓐ CHECK OF DIMENSION AND FUNCTIONNo. Points Evaluation
Student Teacher
Page 6 of 18
1 I can ‘describe a computer network’ and ‘explain what information security is’ and ‘describe different types of hackers’ / 1 / 1
2 I can ‘explain what a network topology is’ and ‘explain what a network topology is’ / 1 / 1
3 I can ‘discuss the advantages and disadvantages of computer networks’ and ‘list computer networking media’ / 1 / 1
4 I can ‘explain transmission bandwidth and duplex’ / 1 / 1Maximum Achievable Points 4
Summarization of Actual Points
Ⓑ VISUAL CHECKS
No. Visual Inspections Explanation EvaluationStudent Teacher
1 All work steps were attempted. / 1 / 12 All work steps were answered correctly. / 1 / 1
Maximum Achievable Points 2Summarization of Actual Points
Ⓒ CLASS PARTICIPATION
No. Participation Inspections Explanation EvaluationStudent Teacher
1 Student brought the book for each computer science class for classes covering unit 1
/ 2 / 2
2 Student completed all activities in the book for unit 1 / 3 / 3
Maximum Achievable Points 5Summarization of Actual Points
TASK SHEET 1 – PART B (Unit 2) – WORK PLAN
# Work Steps Step Completion & Values Remarks
B1 Answer the correct word All computers in this network model are equal and
Page 7 of 18
6100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
A B100 x actual points100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
AA BB100 x actual points100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
A B100 x actual points100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
AA BB100 x actual points + =
5=
‘PART A’ TOTAL:
‘PART A’ CLASS PARTICIPATION:
for the sentence. can act as servers or clients.
a) Local area networkb) Client-serverc) Peer-to-peer
Answer: ______________
B2
B3
In the space, draw your home or lab network.
Show the devices and media.
Page 8 of 18
Look at your network. What is the topology of your network? Why?
What bandwidth is data transmitted on your network?
Topology: _____________________
Reason: __________________________________________________________________________________
Bandwidth: ___________________
B4 Complete the crossword puzzle using the following clues:
Across1. A network device used to connect computers to make a LAN (6)5. Computers communicate over _ _ _ _ _ _ _ _ _ _ . (3, 7)6. Every NIC must have one of these. (3, 7) 8. Units of data sent from one computer to another using a network medium (7)
Down2. Another name for a computer or other device connected to a network (4)3. End _ _ _ _ _ _ (6)4. An example of a transmission medium (6)7. The 0s and 1s that are processed, stored or sent
Crossword Puzzle:
1 2
3 4
5
6 7
8
Page 9 of 18
from one computer to another (4)
B5 What network device sends data packets from one network to another?
How does this device direct the data packets to the correct LAN?
Network Device: ________________________
The device uses _________________________ to direct the data packets to the correct LAN.
B6 ‘Ethernet’, ‘Internet Protocol (IP)’ and ‘Dynamic Host Configuration Protocol (DHCP)’ are all types of network protocols.
What is a network protocol?
A network protocol is ___________________________________________________________________________________________________________________________
TASK SHEET 1 – PART B – EVALUATION
Ⓐ CHECK OF DIMENSION AND FUNCTIONNo. Points Evaluation
Student Teacher1 I can ‘discuss the differences between peer-to-peer and client-
server network models’ / 1 / 1
2 I can ‘state the purpose of network hardware’ / 1 / 13 I can ‘describe a network protocol’ / 1 / 14 I can ‘explain how data packets move across a network’ / 1 / 1
Maximum Achievable Points 4Summarization of Actual Points
Ⓑ VISUAL CHECKS
No. Visual Inspections Explanation EvaluationStudent Teacher
1 All work steps were attempted. / 1 / 1
2 All work steps were answered correctly. / 1 / 1
Maximum Achievable Points 2Summarization of Actual Points
Page 10 of 18
Ⓒ CLASS PARTICIPATION
No. Participation Inspections Explanation EvaluationStudent Teacher
1 Student brought the book for each computer science class for classes covering unit 2
/ 2 / 2
2 Student completed all activities in the book for unit 2 / 3 / 3
Maximum Achievable Points 5Summarization of Actual Points
TASK SHEET 1 – PART C (Practical) – WORK PLAN#
Work StepsStep Completion & ValuesRemarksC1
Design a LAN with the following needs:
a) It must have a star topology.
b) It should connect the following devices together:
- 1 switch
- 2 PCs
- 2 laptops
Page 11 of 18
6100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
A B100 x actual points100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
AA BB100 x actual points100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
A B100 x actual points100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
AA BB100 x actual points + =
5=
‘PART B’ TOTAL:
‘PART B’ CLASS PARTICIPATION:
C2
Connect the devices using copper cable medium.
C3
Check that all your connections are green on both ends.
C4
What is the bandwidth at the two ends of the link between the switch and PC0?
Switch side:
PC0 side:
C5
Check the duplex settings at both ends of laptop 1
Page 12 of 18
Switch side:
PC0 side:
C6
Are the bandwidth and duplex the same or different at the two ends?
Why?
C7
DeviceIP address
Subnet Mask✓
server
172.16.34.5
255.255.0.0
Page 13 of 18
Set the following IP addresses and subnet masks for the end devices.
Check that all the links are green on both sides.
PC0
172.16.34.21
255.255.0.0
PC1
172.16.34.22
255.255.0.0
laptop
172.16.34.51
255.255.0.0
C8
Check and write down the IP address for the server using the ipconfig command
C9
Check the connection for the link between the PC0 and the laptop using the ping command.
What message did you get?
Page 14 of 18
Note:
* Save the final network design
* Save all the test result screenshots
* Submit the file to your teacher
Page 15 of 18
TASK SHEET 1 – PART C – EVALUATION
Ⓐ CHECK OF DIMENSION AND FUNCTIONNo. Points Evaluation
Student Teacher
1 Packet Tracer Software is used accurately, and networking devices placed correctly in the workspace.
/ 1 / 1
2 Networking Devices were placed correctly on the workspace and the correct cables were used for the device connections.
/ 1 / 1
3 The connections are green on both the sides of the network devices, with IP addresses wrote down.
/ 1 / 1
4 The bandwidth is displayed between the switch and PCs
/ 1 / 1
5 The duplex setting is recognized, and the bandwidth comparison is attempted.
/ 1 / 1
Maximum Achievable Points
5
Summarization of Actual Points
Ⓑ VISUAL CHECKS
No. Visual Inspections Explanation EvaluationStudent Teacher
1 Could use all the packet tracer software and place the devices to form a star topology.
/ 1 / 1
2 Could identify the correct media and create the connection between the network devices.
/ 1 / 1
3 Could identify duplex setting and compare the bandwidths / 1 / 1
Maximum Achievable Points 3
Page 16 of 18
Summarization of Actual Points
STUDENT FEEDBACK:
1) Did you face any problem(s) while completing the task sheet? If so write down the problem(s) and the action you took to solve the problem(s).
____________________________________________________________________________________________________________________________________________ 2) How confident are you in the concepts learned in Part A of the task sheet? Which
parts are you not confident in?____________________________________________________________________________________________________________________________________________
3) How confident are you in the concepts learned in Part B of the task sheet? Which parts are you not confident in?
____________________________________________________________________________________________________________________________________________
4) How confident are you in the concepts learned in Part C of the task sheet? Which parts are you not confident in?
____________________________________________________________________________________________________________________________________________
5) Are you confident in using Packet Tracer software to complete your Part C task? ____________________________________________________________________________________________________________________________________________
6) Any suggestions or comments which you would like to share? ____________________________________________________________________________________________________________________________________________
Page 17 of 18
8100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
A B100 x actual points100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
AA BB100 x actual points100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
A B100 x actual points100 x actual points
maximum pointsX 70 %
maximum pointsX 30 %+
AA BB100 x actual points + =‘PART C’ TOTAL: