TB108 - Hydraulic Excavator

OPERATING PERFORMANCEOperating Weight Maximum Digging DepthMaximum Dump HeightMaximum ReachMaximum Bucket Breakout Force Maximum Arm Digging ForceArm LengthSlew SpeedTraction Force

2,033 lbs (922 kg) 5 ft 6 in (1,680 mm)

7 ft 0 in (2,145 mm)9 ft 6 in (2,880 mm)3,157 lbs (1,432 kg)

1,303 lbs (591 kg)2 ft 7.9 in (810 mm)

9.3 rpm2,350 lbs (1,066 kg)

ENGINEMake / Model Tier RatingCylinders / DisplacementHorsepowerRated Engine SpeedMaximum TorqueEngine LubricationCooling SystemFuel Tank CapacityFuel Consumption (65% of full load) Electrical System

Yanmar / 2TNV70EPA Tier 4

2 / 34.7 cu in (.57 L)9.6 hp (7.1 Kw)

2,400 rpm24.6 ft-lb @ 1,800 rpm (33.4 Nm)

1.8 qt (1.7 L)3.0 qt (2.8 L)

2.1 gal (8.0 L)0.42 gal / hr (1.6 L / hr)

12 volts / 9 amps

UNDERCARRIAGETraction Drive TypeParking BrakeTrack Roller TypeTrack RollersTrack WidthTrack Ground Contact LengthGround PressureMaximum Travel Speed Low Range High Range

Planetary ReductionSpring Applied, Hydraulically Released

Permanently Sealed, Single Flanged2 per side

7.1 in (180 mm) 35.4 in (900 mm)

3.6 psi

1.2 mph (2 km / hr)2.4 mph (3.9 km / hr)

HYDRAULICPump TypeTotal Hydraulic FlowAuxiliary Hydraulic FlowSystem Operating PressureHydraulic Resevoir CapacityHydraulic System Capacity

Tandem Gear5.7 gal / min (21.5 L / min)5.7 gal / min (21.5 L / min)

2,288 psi (15.7 mpa)1.9 gal (7.0 L)

3.7 gal (14.0 L)

9 ft 8 in (2,970 mm)9 ft 6 in (2,880 mm)

4.7 in (120 mm) 6.1 in (155 mm)

9 ft 9 in (2,975 mm)7 ft 0 in (2,145 mm)5 ft 6 in (1,680 mm)4 ft 6 in (1,370 mm)

®

Those in the know, know Takeuchi

Maximum ReachMaximum Reach Ground LevelBlade Maximum Lower Blade Maximum LiftMaximum Dig HeightMaximum Dump HeightMaximum Dig DepthMaximum Vertical Dig Depth

WORKING DIMENSIONSA.B.C.D.E.F.G.H.

BA

F

D

E

H

CG

wTB108 - Hydraulic Excavator

Product Features

www.takeuchi-us.com

t - Standard m - Optional

© 2013 Takeuchi Manufacturing (U.S.), Ltd. All Rights Reserved. Printed in the U.S.A. In accordance with our established policy of continued improvement, specifications and features are subject to change without notice. Pictures may show options other than standard equipment.FORM:TB108Spec Sheet Mar. 2013

ENGINE EPA Tier 4 Extended Life Coolant Dual Element Air Cleaner

ELECTRICAL Gauge for High Coolant Temperature, Warning lights for Charge Level and Oil Pressure 12 volt System with 9 amp Alternator Boom Mounted Work Light Engine Preheat Hour Meter Travel Alarm

UNDERCARRIAGE AND FRAME Hydraulically Retractable Track Frame Low and High Range Travel Adjustable Width Backfill Blade Cast Iron Wrap Around Protective Counterweight 7.1” Rubber Tracks

HYDRAULIC Tandem Gear Pumps Proportional Main Control Valve Primary Auxiliary Hydraulic Circuit Plumbed to Arm with 1-Way and 2-Way Operation

t tt

t

tttt t

ttttt

ttt

WORKING EQUIPMENT Main Boom Cylinder Guard Long Arm Dual Pin Position Bucket

ttm

OPERATOR’S STATION ROPS / TOPS / FOPS Four Post Canopy Changeable Control Pattern Auxiliary Hydraulics Controlled with Foot Pedal 2” Seat Belt 3” Seat Belt

ttttm

9 ft 0 in (2,740 mm)6 ft 11 in (2,110 mm)4 ft 0 in (1,220 mm)

35.4 in (900 mm)7.9 in (200 mm)

15.2 in (385 mm)31.5 in (800 mm)26.8 in (680 mm)35.4 in (900 mm)2 ft 8 in (825 mm)

3 ft 8 in (1,125 mm)13.4 in (340 mm) @ 90° 17.3 in (440 mm) @ 90°

6.3 in (160 mm)29.1 in (740 mm)35.4 in (900 mm)

7.1 in (180 mm)

®

Those in the know, know Takeuchi

Transport LengthTransport HeightUndercarriage LengthTrack Ground Contact LengthDozer Blade HeightCounterweight Ground ClearanceTail Swing (Slew) RadiusDozer Blade Width (retracted)Dozer Blade Width (extended)Min. Front Radius (Offset)Min. Front Radius (Straight)Offset Working Distance (Right)Offset Working Distance (Left)Ground ClearanceWidth (retracted)Width (extended)Track Width (Rubber)

MACHINE DIMENSIONSA.B.C.D.E.F.G.H.J.K.L.M.P.Q.R.S.T.

E

J

SR

P

G

A

B

C

F

L

QT

M

H

D

K