Post on 03-May-2022
Soren Queen bed Assembly InstructionsThank you for your purchase.Please follow the instructions below for correct assembly.
1mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
For quicker assembly, we recommend the use of a power drill on a low-speed setting.
Hardware Supplied
Phillips & hammer required.
screwx42
washerx16
largeAllen Key
x1
long bolt x26
smallAllen Key
x1
adjusterx2
elbowconnector
x4
flat connector
x4
boltx12
A B C D
E F G H
J K
screwx20
I
plasticglide x5
Soren Queen bedAssembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1 2
Attach 2x panels [2] to panels [1], [3] and [10]. Secure with 16x long bolts (C) and 16x washers (F). Tighten with the small Allen Key (B).
Turn over the connected panels, attach 2x flat connector (I) to panel [3] and secure with 8x screws (A). Tighten with a screwdriver. Attach 3x plastic glides (K) to panel [3] with a hammer.
101
11
2
2
3
3
A
A
I
I
A
I
C
F
B
K
K
K
C
F
C
F
Soren Queen bedAssembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4x2
Attach 2x elbow connector (H) to panel [6] and secure with 8x screws (D). Tighten with a screwdriver.
Attach 2x flat connector (I) to panel [4] and secure with 8x screws (A). Tighten with a screwdriver. Attach 2x panels [5] to panel [4] and secure with 8x long bolts (C).Tighten with the small Allen Key (B). Attach 2x plastic glides (K) to panels [5] with a hammer.
4
5
5
6
4
A
I
A
D
D
H
H
I
C
C
B
D
H
K
K
Soren Queen bedAssembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panels [6] to panel [4] and secure with 6x bolts (G). Tighten with the large Allen Key (J).
Attach panels [6] to panel [3] and secure with 6x bolts (G). Tighten with the large Allen Key (J).
3
6
6 6
6
4
GG
GH
I
J
HH
II
J
Soren Queen bedAssembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach 2x panels [8] to panel [7] with 2x long bolts (C) and secure with small Allen Key (B). Insert the 2x adjusters (E) into the bottom of panels [8] as shown.
Attach panel [7] to panels [3] and [4] and secure with 4 x screws (D).Tighten with a screwdriver. Once assembled lift the bed into place, do not drag. Once in the correct position, rotate the adjusters (E) to the floor level. Ensure the unit is balanced and steady before use.
D
D
D
D
378
8
4
E
C
C
E
E
B
B
E
E
7
D
D
6
6
Soren Queen bed
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 10Assembly Instructions
Attach 13x panels [9] to panels [6] and secure with 26 x screws (A). Tighten with a screwdriver.
You're done, enjoy!
A
A
39
6
6