Post on 20-Feb-2018
Hexagon Keys (Long)in clip set, blackened or nickel plated - DIN 911L
90180
wixroyd.com
Material
Keys: chrome vanadium, hardened.
Blackened or nickel plated.
Clip: plastic polyamide, red.
Technical Notes
Parts to DIN 911 LC/LD and ISO
2936 LC/LD.
Tips
Other sizes and sets available on
request. For a/f of hex. keys and
screw sizes please refer to Appendix
8.
Order No. Finish Pieces
Contents
a/f
mm/inch
Xg
90180.W0007 Nickel Plated 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 415
90180.W0009 Blackened 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 415
90180.W0908 Nickel Plated 9 5/64, 3/32, 1/8, 5/32,
3/16, 7/32, 1/4, 5/32
395
Hexagon Keys (Metric, Long)in plastic box, nickel plated - DIN 911L
90210
wixroyd.com
Material
Keys: chrome vanadium, hardened.
Nickel plated.
Box: impact resistant plastic.
Technical Notes
Parts to DIN 911 LD and ISO 2936
LD.
Tips
Other set combinations available on
request. For a/f of hex. keys and
screw sizes please refer to Appendix
8.
Order No. Finish Pieces
Contents
a/f
mm
l x w x h Xg
90210.W0008 Nickel Plated 8 2, 2.5, 3, 4, 5, 6, 8, 10 265x88x17 535
Hexagon Keys, T-Handlednickel plated
90300
wixroyd.com
Material
Blade: chrome vanadium, hardened.
Nickel plated.
Handle: resistant plastic (cadmium
free), with black plastic grip.
Technical Notes
Items marked with an * stamped
with both metric and imperial sizes.
Grip shape optimised for
comfortable use.
Features hang-up hole for a tidy
workplace.
Tips
Other sizes and blade lengths
available on request. Please request
quotation for your company logo to
be printed on handle. For a/f of hex.
keys and screw sizes please refer to
Appendix 8.
Order No. Finisha/f
mm
a/f
inchesl1
l2
b Xg
90300.W0020 Nickel Plated 2,0 5/64 100 125 80 18
90300.W0025 Nickel Plated 2,5 - 100 125 80 24
90300.W0026 Nickel Plated 2,5 - 200 225 80 30
90300.W0030 Nickel Plated 3,0 - 100 125 80 24
90300.W0031 Nickel Plated 3,0 - 150 175 80 30
90300.W0032 Nickel Plated 3,0 - 200 225 80 40
90300.W0040 Nickel Plated 4,0 5/32 100 125 80 31
90300.W0041 Nickel Plated 4,0 5/32 150 175 80 36
90300.W0042 Nickel Plated 4,0 5/32 200 225 80 41
90300.W0043 Nickel Plated 4,0 5/32 300 325 80 50
90300.W0050 Nickel Plated 5,0 - 100 131 100 51
90300.W0051 Nickel Plated 5,0 - 150 181 100 60
90300.W0052 Nickel Plated 5,0 - 200 231 100 68
90300.W0053 Nickel Plated 5,0 - 350 381 100 100
90300.W0060 Nickel Plated 6,0 - 100 131 100 58
90300.W0061 Nickel Plated 6,0 - 150 181 100 77
90300.W0062 Nickel Plated 6,0 - 200 231 100 84
90300.W0063 Nickel Plated 6,0 - 350 381 100 130
90300.W0080 Nickel Plated 8,0 5/16 100 131 100 85
90300.W0081 Nickel Plated 8,0 5/16 150 181 100 105
90300.W0082 Nickel Plated 8,0 5/16 200 231 100 125
90300.W0083 Nickel Plated 8,0 5/16 350 381 100 200
90300.W0100 Nickel Plated 10,0 - 100 138 100 165
90300.W0102 Nickel Plated 10,0 - 350 338 100 350
Hexagon Keys, T-Handledwith screw retaining ring, on workstand
90310
wixroyd.com
Material
Blade: chrome vanadium, hardened.
Nickel plated.
Handle: shock resistant red plastic
(cadmium free), with black plastic
grip.
Stand: single-grade, shock resistant
plastic (cadium free).
Technical Notes
For a/f of hex. keys and screw sizes
please refer to Appendix 8.
Tips
Stand features clips for connecting
additional workshop stands.
Order No. Finish Piecesa/f
2 x L
a/f
2,5 x L
a/f
3 x L
a/f
4 x L
a/f
5 x L
a/f
6 x L
a/f
8 x LX
g
90310.W0022 Nickel Plated 7 100 100 150 150 150 200 200 650
Hexagon Keys (Metric)with pilot pin, in plastic box
90490
wixroyd.com
Material
Chrome vanadium, hardened. Nickel
plated.
Box: shock resistant plastic.
Technical Notes
Used with socket head cap screws
DIN 6912, these hexagon keys, with
pilot pin provide added security to
components in a variety of
applications. Sizes 2 and 2,5 mm
are standard hex. keys.
Tips
Other sizes available on request.
Order No. Finish Pieces
Contents
a/f
mm
Xg
90490.W0007 Nickel Plated 7 2, 2.5, 3, 4, 5, 6, 8 175
Hex. Keys, Ball Ended, Straight Handlenickel plated
90510
wixroyd.com
Material
Blade: chrome vanadium, hardened.
Nickel plated.
Handle: shock resistant red plastic
(cadmium free), with black plastic
grip.
Tips
For a/f of hex. keys and screw sizes
please refer to Appendix 8.
Order No. Finisha/f
mml1
l2
w Xg
90510.W0002 Nickel Plated 2,5 100 190 19 35
90510.W0003 Nickel Plated 3,0 100 190 19 35
90510.W0004 Nickel Plated 4,0 100 200 21 50
90510.W0005 Nickel Plated 5,0 100 200 21 75
Hex. Keys, Ball Ended, T-Handlednickel plated
90520
wixroyd.com
Material
Blade: chrome vanadium, hardened.
Nickel plated.
Handle: shock resistant red plastic
(cadmium free), with black plastic
grip.
Tips
For a/f of hex. keys and screw sizes
please refer to Appendix 8.
Order No.a/f
mml1
l2
b Xg
90520.W0004 4 150 175 80 40
90520.W0005 5 150 181 100 65
90520.W0006 6 150 181 100 80
90520.W0008 8 200 231 100 130
Hexagon Keys, Ball Ended (Metric, Long)in clip set, blackened or Nickel plated
90530
wixroyd.com
Material
Keys: chrome vanadium, hardened.
Blackened or chrome plated.
Clip: plastic polyamide.
Tips
For a/f of hex. keys and screw sizes
please refer to Appendix 8.
Order No. Finish Pieces
Contents
a/f
mm
Xg
90530.W0009 Blackened 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 440
90530.W0109 Nickel Plated 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 440
Torx Keys, T-Handledchrome plated
90620
wixroyd.com
Material
Blade: chrome vanadium, hardened.
Handle: shock resistant green
plastic (cadmium free).
Technical Notes
Torx is a registered trademark of
Camcar/Textron Inc.
Tips
Other sizes and lengths available on
request. Please request quotation
for your company logo to be printed
on handle.
Order No. FinishTorx
sizea l
1l2
b Xg
90620.W0009 Chrome Plated T 9 2,50 100 125 80 35
90620.W0010 Chrome Plated T10 2,74 100 125 80 35
90620.W0015 Chrome Plated T15 3,27 100 125 80 36
90620.W0020 Chrome Plated T20 3,86 100 125 100 60
90620.W0025 Chrome Plated T25 4,43 100 125 100 60
90620.W0027 Chrome Plated T27 4,99 100 131 100 70
90620.W0030 Chrome Plated T30 5,52 100 131 100 75
90620.W0040 Chrome Plated T40 6,65 100 131 100 80
90620.W0050 Chrome Plated T50 8,83 150 188 120 160
Torx Keys, T-Handledon workshop stand, chrome plated
90630
wixroyd.com
Material
Blade: chrome vanadium, hardened.
Chrome plated, with black tip.
Handle: shock resistant green
plastic (cadmium free).
Workstand: shock resistant red
plastic.
Technical Notes
With T-Handled Torx Keys part
number 90620.
Tips
Stand features clips for connecting
additional workshop stands.
Order No.Torx
T10 x l1
Torx
T15 x l1
Torx
T20 x l1
Torx
T25 x l1
Torx
T30 x l1
Torx
T40 x l1
Torx
T50 x l1
Xg
90630.W0001 100 100 100 100 100 100 150 660
Torx Keys, Ball-endedin clip set, 8 piece set
90640
wixroyd.com
Material
Keys: chrome vanadium, hardened,
steel grey.
Clip: plastic polyamide, green.
Order No. Finish PiecesContents
a/fX
g
90640.W0008 Chrome Vanadium 8 T9, T10, T15, T20, T25, T27, T30, T40 165
Torx Keys, Straight Handledblackened
90650
wixroyd.com
Material
Blade: chrome vanadium, hardened.
Blackened. Chrome plated.
Handle: shock resistant green
plastic (cadmium free), with black
plastic grip.
Tips
Other sizes available on request. For
a/f of hex. Keys and screw sizes
please refer to Appendix 8.
Order No. Finish Torx a l1
l2
Xg
90650.W0008 Blackened T 8 2,31 60 140 37
90650.W0009 Blackened T 9 2,50 60 140 37
90650.W0010 Blackened T10 2,74 80 160 39
90650.W0015 Blackened T15 3,27 80 170 41
90650.W0020 Blackened T20 3,86 100 190 56
90650.W0025 Blackened T25 4,43 100 200 60
Torx Keys, Flag Typeblackened
90670
wixroyd.com
Material
Blade: chrome vanadium, hardened.
Blackened.
Handle: shock resistant green
plastic (cadmium free).
Tips
For a/f of hex. keys and screw sizes
please refer to Appendix 8.
Order No. Finish Torx a b l1
l2
Xg
90670.W0006 Blackened T 6 1,70 38 35 70 14
90670.W0007 Blackened T 7 1,99 38 35 70 14
90670.W0008 Blackened T 8 2,31 38 40 75 14
90670.W0009 Blackened T 9 2,50 38 40 75 15
90670.W0010 Blackened T10 2,74 38 40 75 15
Torx Keys, Mini Grip Typeblackened
90680
wixroyd.com
Material
Blade: chrome vanadium, hardened.
Blackened.
Handle: shock resistant green
plastic (cadmium free).
Tips
For a/f of hex. keys and screw sizes
please refer to Appendix 8.
Order No. Finish Torx a l1
l2
b Xg
90680.W0005 Blackened T 5 1,42 35 69 22 3,5
90680.W0006 Blackened T 6 1,70 35 69 22 3,6
90680.W0007 Blackened T 7 1,99 35 69 22 3,7
90680.W0008 Blackened T 8 2,31 40 74 22 5,8
90680.W0009 Blackened T 9 2,50 40 74 22 6,3
90680.W0010 Blackened T10 2,74 40 74 22 6,8
90680.W0015 Blackened T15 3,27 45 79 22 7,5
90680.W0020 Blackened T20 3,86 45 79 22 8,0
60° and 90° 60°, 82°, 90°
and 120° • Concentric chamfers.
• Excellent surface finish.
• Reduces risk of cutting into the work piece.
• Controlled machining torque.
1 When the chamfer tool’s spindle
is lowered, it’s pilot cone firstly
centres the workpiece then
retracts to allow the blade to
come into contact with the
material and start cutting of the
chamfer.
2 Adjusting the output of the blade
controls the thickness of the
chip count NOT the value or
angle of the chamfer e.g. with
a blade output of 0,4mm the
chamfering tool requires 10
revolutions to cut 1mm of the
chamfer.
3 Concentric chamfer achieved.
Chamfering tools consist
of three main elements.
Attachment spindle, pilot cone,
cutting blade.
A variety of spindle
attachments are available
from CM1, CM2 and CM3.
Our chamfer tools act in a
similar fashion to a carpenter’s
plane.
external chamfers
internal chamfers
Wixroyd chamfering tools, which are mainly used on drills, create high quality consistent inner or outer chamfers between 60° to 120° inclusive angle, on a wide range of metals.
Construction
wixroyd.com
Chamfering Tools
Recommendedcutting speed
Typical rpm for varying
chamfer diameters,
when using cutting speed of
between 10 and 20 m/min.
We do however recommend you use the following formula to check the most suitable rpm used.
Rpm = (cutting speed x 1000) / (diameter x 3.14)
We recommend a cutting speed of between 10 and 20m/min. Hence typical value for chamfers of varying diameter are as follows.
Important Note: We recommend chamfering tool is lubricated with cutting fluid or soluble oil to
ensure long life of cutting blade edge, and to reduce wear of the pilot cone.
We offer blades with a variety of cutting angles to best suit the material in which a chamfer
is required.
Typically a bald cutting angle of 14° suits most applications, please refer to table below.
Diameter RPM range
10Ø mm 320 to 640 rpm
15Ø mm 210 to 420 rpm
20Ø mm 160 to 320 rpm
30Ø mm 110 to 220 rpm
40Ø mm 80 to 160 rpm
50Ø mm 55 to 110 rpm
Blade cutting angle 0° 14° 20° 25°
Suitable for material
Brass, bronze,
cast iron,
stainless steel
Steel,
special bronze,
perspex
Soft steel, copper,
AU 4G, plastic,
stainless steel
Aluminium,
soft iron,
sheet metal
0845 26 66 577 info@wixroyd.com
Chamfering Tools
Inner Chamfering Toolsfor drill attachment
91000
wixroyd.com
Technical Notes
Consists of four main elements;
1. Body and drill attachment
spindle.
2. Pilot cone - unique to the desired
chamfer, provides full support
during cutting and ensures
concentric chamfer.
3. Blades - 1 x HSS blade at 14
cutting angle supplied.
4. Blade adjustment lock nut.
Tips
Achieve high quality concentric
chamfering quickly and easily,
without risk of damage/cutting into
workpiece.
Recommended cutting speed; 10 to
20 m/min. For hand drill chamfering
tool we recommend a cutting speed
of 3 - 40 rpm.
Available with attachment spindles
to suit most pillar drills, CNCs or
hand drills.
Chamfer angle quoted is "inclusive
angle".
Important Notes
To extend life of blade and pilot
cone we recommend lubrication
with cutting fluid or soluble oil.
On initial set-up make minor height
adjustment of pilot cone via blade
adjustment lock nut, to ensure best
possible positioning.
Referral
For replacement or alternative
blades to suit different material
types, see part no. 91002.
Also available in 82 and 120
inclusive chamfer angle models,
subject to minimum qty.
Order No.Chamfer dia.
min. - max.
Inc. chamfer
angle
Attachment
spindled
1d
2l1
91000.W1860-
1
2-17 60 18 26 64
91000.W1890-
1
2-17 90 18 26 55
91000.W4260-
1
3-41 60 42 65 108
91000.W4290-
1
3-41 90 42 65 85
91000.W4260-
2
3-41 60 CM2 42 65 108
91000.W4290-
2
3-41 90 CM2 42 65 85
91000.W6060-
2
21-59 60 CM2 60 70 106
91000.W6090-
2
21-59 90 CM2 60 70 94
91000.W8060-
2
40-77 60 CM2 80 90 114
91000.W8090-
2
40-77 90 CM2 80 90 100
Inner Chamfering Toolsfor drill attachment
91000
wixroyd.com
Technical Notes
Consists of four main elements;
1. Body and drill attachment
spindle.
2. Pilot cone - unique to the desired
chamfer, provides full support
during cutting and ensures
concentric chamfer.
3. Blades - 1 x HSS blade at 14
cutting angle supplied.
4. Blade adjustment lock nut.
Tips
Achieve high quality concentric
chamfering quickly and easily,
without risk of damage/cutting into
workpiece.
Recommended cutting speed; 10 to
20 m/min. For hand drill chamfering
tool we recommend a cutting speed
of 3 - 40 rpm.
Available with attachment spindles
to suit most pillar drills, CNCs or
hand drills.
Chamfer angle quoted is "inclusive
angle".
Important Notes
To extend life of blade and pilot
cone we recommend lubrication
with cutting fluid or soluble oil.
On initial set-up make minor height
adjustment of pilot cone via blade
adjustment lock nut, to ensure best
possible positioning.
Referral
For replacement or alternative
blades to suit different material
types, see part no. 91002.
Also available in 82 and 120
inclusive chamfer angle models,
subject to minimum qty.
Blades for Inner Chamfering Toolsfor use with 91000
91002
wixroyd.com
Material
High speed steel.
Technical Notes
Blade with a 14 cutting angle is
most commonly used as it covers
the widest range of standard
materials, please see material
suitability table below.
Important Notes
Recommended cutting speed; 10 to
20m/min.
To extend life of blade and pilot
cone we recommend lubrication
with cutting fluid or soluble oil.
Order No. MaterialFor chamfer dia.
min. - max.
Inc. chamfer
angle
Cutting
angle
a
No. of
cutting
edges
w1
l1
91002.W1860-
00
HSS 2-17 60 0 1 8,7 38,5
91002.W1860-
14
HSS 2-17 60 14 1 8,7 38,5
91002.W1860-
20
HSS 2-17 60 20 1 8,7 38,5
91002.W1860-
25
HSS 2-17 60 25 1 8,7 38,5
91002.W4260-
00
HSS 3-41 60 0 2 20,0 90,0
91002.W4260-
14
HSS 3-41 60 14 2 20,0 90,0
91002.W4260-
20
HSS 3-41 60 20 2 20,0 90,0
91002.W4260-
25
HSS 3-41 60 25 2 20,0 90,0
91002.W6060-
00
HSS 21-59/40-77 60 0 2 20,0 90,0
91002.W6060-
14
HSS 21-59/40-77 60 14 2 20,0 90,0
91002.W6060-
20
HSS 21-59/40-77 60 20 2 20,0 90,0
91002.W6060-
25
HSS 21-59/40-77 60 25 2 20,0 90,0
91002.W1890-
00
HSS 2-17 90 0 1 8,7 30,0
91002.W1890-
14
HSS 2-17 90 14 1 8,7 30,0
91002.W1890-
20
HSS 2-17 90 20 1 8,7 30,0
91002.W1890-
25
HSS 2-17 90 25 1 8,7 30,0
91002.W4290-
00
HSS 3-41 90 0 2 20,0 73,0
91002.W4290-
14
HSS 3-41 90 14 2 20,0 73,0
Blades for Inner Chamfering Toolsfor use with 91000
91002
wixroyd.com
Material
High speed steel.
Technical Notes
Blade with a 14 cutting angle is
most commonly used as it covers
the widest range of standard
materials, please see material
suitability table below.
Important Notes
Recommended cutting speed; 10 to
20m/min.
To extend life of blade and pilot
cone we recommend lubrication
with cutting fluid or soluble oil.
Order No. MaterialFor chamfer dia.
min. - max.
Inc. chamfer
angle
Cutting
angle
a
No. of
cutting
edges
w1
l1
91002.W4290-
20
HSS 3-41 90 20 2 20,0 73,0
91002.W4290-
25
HSS 3-41 90 25 2 20,0 73,0
91002.W6090-
00
HSS 21-59/40-77 90 0 2 20,0 73,0
91002.W6090-
14
HSS 21-59/40-77 90 14 2 20,0 73,0
91002.W6090-
20
HSS 21-59/40-77 90 20 2 20,0 73,0
91002.W6090-
25
HSS 21-59/40-77 90 25 2 20,0 73,0
91002.W4282-
00
HSS 3-41 82 0 2 20,0 73,0
91002.W4282-
14
HSS 3-41 82 14 2 20,0 73,0
91002.W4282-
20
HSS 3-41 82 20 2 20,0 73,0
91002.W4282-
25
HSS 3-41 82 25 2 20,0 73,0
91002.W8120-
00
HSS 2-17 120 0 1 20,0 73,0
91002.W8120-
14
HSS 2-17 120 14 1 20,0 73,0
91002.W8120-
20
HSS 2-17 120 20 1 20,0 73,0
91002.W8120-
25
HSS 2-17 120 25 1 20,0 73,0
91002.W4242-
00
HSS 3-41 120 0 2 20,0 60,0
91002.W4242-
14
HSS 3-41 120 14 2 20,0 60,0
91002.W4242-
20
HSS 3-41 120 20 2 20,0 60,0
91002.W4242-
25
HSS 3-41 120 25 2 20,0 60,0
Outer Chamfering Toolsfor drill attachment
91020
wixroyd.com
Technical Notes
Consists of four main elements;
1. Body and drill attachment
spindle.
2. Pilot cone - unique to the desired
chamfer, provides full support
during cutting and ensures
concentric chamfer.
3. Blades - 1 x HSS blade at 14
cutting angle supplied.
4. Blades adj. lock nut.
Recommended cutting speed; 10 to
20 m/min.
Acheive high quality concentric
chamfering quickly and easily,
without risk of damage/cutting into
the work piece. Specially designed
pilot cone provides full support of
blade throughout cutting and
ensures concentric chamfer.
Available with attachment spindles
to suit most pillar drills, CNCs or
hand drills.
Chamfer angle quoted is "inclusive
angle".
To ensure a longer life to the cutting
edge of the blades and to prevent
damage to the pilot cone we firmly
recommend lubricating with cutting
compound or soluble oil.
Important Notes
Recommended cutting speed; 10 to
20 m/min.
To extend life of blade and pilot
cone we recommend lubrication
with cutting fluid or soluble oil.
On initial set-up make minor height
adjustment of pilot cone via blade
adjustment lock nut, to ensure best
possible positioning.
Referral
For replacement blades see part no.
91022.
Order No.Chamfer dia.
min. - max.
Inc. chamfer
angle
Attachment
spindled
1d
2l1
91020.W1860-
1
2-17 60 18 26 54
91020.W1890-
1
2-17 90 18 26 54
91020.W3660-
1
4-37 60 42 65 105
91020.W3690-
1
4-37 90 42 65 85
91020.W3660-
2
4-37 60 CM2 42 65 105
91020.W3690-
2
4-37 90 CM2 42 65 85
91020.W4660-
2
9-45 60 CM2 48 65 109
91020.W4690-
2
9-45 90 CM2 48 65 85
91020.W6060-
2
21-57 60 CM2 60 70 109
91020.W6090-
2
21-57 90 CM2 60 70 85
91020.W8060-
2
40-77 60 CM2 80 90 118
91020.W8090-
2
40-77 90 CM2 80 90 95
Outer Chamfering Toolsfor drill attachment
91020
wixroyd.com
Technical Notes
Consists of four main elements;
1. Body and drill attachment
spindle.
2. Pilot cone - unique to the desired
chamfer, provides full support
during cutting and ensures
concentric chamfer.
3. Blades - 1 x HSS blade at 14
cutting angle supplied.
4. Blades adj. lock nut.
Recommended cutting speed; 10 to
20 m/min.
Acheive high quality concentric
chamfering quickly and easily,
without risk of damage/cutting into
the work piece. Specially designed
pilot cone provides full support of
blade throughout cutting and
ensures concentric chamfer.
Available with attachment spindles
to suit most pillar drills, CNCs or
hand drills.
Chamfer angle quoted is "inclusive
angle".
To ensure a longer life to the cutting
edge of the blades and to prevent
damage to the pilot cone we firmly
recommend lubricating with cutting
compound or soluble oil.
Important Notes
Recommended cutting speed; 10 to
20 m/min.
To extend life of blade and pilot
cone we recommend lubrication
with cutting fluid or soluble oil.
On initial set-up make minor height
adjustment of pilot cone via blade
adjustment lock nut, to ensure best
possible positioning.
Referral
For replacement blades see part no.
91022.
Blades for Outer Chamfering Toolsfor use with 91020
91022
wixroyd.com
Material
High speed steel.
Technical Notes
Blade with a 14 cutting angle is
most commonly used as it covers
the widest range of standard
materials, please see material
suitability table below.
To ensure a longer life to the cutting
edge of the blades and to prevent
damage to the pilot cone we firmly
recommend lubricating with cutting
compound or soluble oil.
Tips
Recommended cutting speed; 10 to
20 m/min.
Order No. MaterialChamfer dia.
min. - max.
Inc.
chamfer
angle
Cutting
angle
a
No. of
cutting
edges
w1
l1
91022.W1860-
00
HSS 2-17 60 0 1 8,7 30
91022.W1860-
14
HSS 2-17 60 14 1 8,7 30
91022.W1860-
20
HSS 2-17 60 20 1 8,7 30
91022.W1860-
25
HSS 2-17 60 25 1 8,7 30
91022.W3660-
00
HSS 4-37/9-45/21-57/40-77 60 0 2 20,0 88
91022.W3660-
14
HSS 4-37/9-45/21-57/40-77 60 14 2 20,0 88
91022.W3660-
20
HSS 4-37/9-45/21-57/40-77 60 20 2 20,0 88
91022.W3660-
25
HSS 4-37/9-45/21-57/40-77 60 25 2 20,0 88
91022.W1890-
00
HSS 2-17 90 0 1 8,7 30
91022.W1890-
14
HSS 2-17 90 14 1 8,7 30
91022.W1890-
20
HSS 2-17 90 20 1 8,7 30
91022.W1890-
25
HSS 2-17 90 25 1 8,7 30
91022.W3690-
00
HSS 4-37/9-45/21-57/40-77 90 0 2 20,0 69
91022.W3690-
14
HSS 4-37/9-45/21-57/40-77 90 14 2 20,0 69
91022.W3690-
20
HSS 4-37/9-45/21-57/40-77 90 20 2 20,0 69
91022.W3690-
25
HSS 4-37/9-45/21-57/40-77 90 25 2 20,0 69
Collet Wrenches 91080
wixroyd.com
Material
Steel head and fins.
Technical Notes
Simplifies insertion and removal of
collets in the spindle nose on CNC
lathes.
Important Notes
All dimensions in imperial.
Order No.Collet
sizeFins l
1d
1l2
l3
w1
d2
91080.W0005 5C 3 4,25 1,25 0,5 0,25 0,28 1,13
91080.W0010 16C 3 4,25 1,75 0,5 0,25 0,50 1,13
91080.W0015 3J 4 4,25 1,75 0,5 0,25 0,50 1,13
Collet Stops 91082
wixroyd.com
Material
Collet stop for 5C.
Technical Notes
This front loading collet stop is
extremely easy to use.
Once seated the collet need not be
removed for adjustment.
Self-centering and reusable.
Order No. l1
91082.W0020 610
T-Wrench, Triangularfemale - DIN 22417A
91990
wixroyd.com
Material
Steel, zinc plated.
Technical Notes
For use with triangular screw to DIN
22424, and triangular nuts to DIN
22425.
Order No. Screw thread l1
d1
a1
w2
d2
s1
Xg
91990.W0004 M 4 90 10 7,7 50 6 6,80 20
91990.W0005 M 5 100 12 9,4 65 6 8,30 30
91990.W0006 M 6 115 14 11,4 80 6 10,05 60
91990.W0008 M 8 125 16 13,7 100 6 12,05 80
91990.W0010 M10 140 20 17,1 125 8 15,05 160
91990.W0012 M12 160 22 18,9 160 10 16,55 240
91990.W0016 M16 180 25 23,5 200 12 20,55 400
T-Wrench, Square Drive (Standard)female - DIN 904
92000
wixroyd.com
Material
Steel C35/C45.
Body and socket: hardened and
brown finish tempered.
Technical Notes
( ) not to DIN Standard. Items
marked *, body not recessed as
required by DIN standard.
Order No. a/f d1
d2
l1
l2
l4
Xg
92000.W0004 4 12,0 6,0 60 160 11 85
92000.W0005 5 12,0 6,0 60 160 11 85
92000.W0006 6 12,0 6,0 80 160 12 100
92000.W0007 7 14,6 6,0 80 160 15 180
92000.W0008 8 16,0 9,0 80 180 15 180
92000.W0009 9 18,0 9,0 100 180 18 245
92000.W0010 10 20,0 11,0 100 200 18 340
92000.W0012 12 24,0 12,0 100 250 21 520
92000.W0013 13 24,0 12,0 100 250 22 520
92000.W0014 14 28,0 14,6 120 320 24 875
92000.W0017 17 34,0 16,0 160 400 28 1625
92000.W0019 19 36,0 16,0 200 400 30 2035
92000.W0022 22 42,0 18,0 200 500 34 2900
92000.W0024 24* 45,0 20,0 250 630 36 4270
T-Wrench, Square Drive (Long)female - DIN 904L
92010
wixroyd.com
Material
Steel C35/C45.
Body and socket: hardened brown
finish tempered.
Technical Notes
( ) not to DIN standard. Items
marked *, body not recessed as
required by DIN standard.
Order No. a/f d1
d2
l1
l2
l4
Xg
92010.W0005 5 12 6,0 120 160 11 100
92010.W0006 6 12 6,0 160 160 12 110
92010.W0008 8 16 9,0 160 180 15 210
92010.W0009 9 18 9,0 200 200 18 390
92010.W0010 10 20 11,0 200 200 18 390
92010.W0012 12 24 12,0 200 250 21 600
92010.W0013 13 24 12,0 200 250 22 600
92010.W0014 14 28 14,6 200 320 24 795
92010.W0017 17* 34 16,0 250 400 28 1500
92010.W0019 19* 36 16,0 320 400 30 1700
T-Wrench, Square Socketmale - DIN 905
92050
wixroyd.com
Material
Steel C35/C45.
Body and socket: hardened and
brown finish tempered.
Technical Notes
( ) not to DIN standard.
Order No. a/f d1
d2
d3
l1
l2
l3
l4
Xg
92050.W0004 (4) 12,0 6,0 6 60 160 20 9 70
92050.W0005 5 12,0 6,0 8 60 160 20 11 70
92050.W0006 6 12,0 6,0 10 80 160 22 12 80
92050.W0007 (7) 14,6 6,0 12 80 160 26 15 115
92050.W0008 8 16,0 9,0 14 80 180 26 15 180
92050.W0009 9 16,0 9,0 14 80 180 26 17 180
92050.W0010 10 20,0 11,0 18 100 200 30 18 320
92050.W0011 11 20,0 11,0 18 100 200 30 20 320
92050.W0012 12 24,0 12,0 20 100 250 38 21 450
92050.W0013 13 24,0 12,0 20 100 250 38 22 450
92050.W0014 14 28,0 14,6 22 120 320 38 24 780
92050.W0017 17 34,0 16,0 25 160 400 50 28 1500
92050.W0019 19 36,0 16,0 28 200 400 50 30 1850
92050.W0022 22 42,0 20,0 32 200 630 65 34 3100
Square Socket Wrenchfemale - DIN 248
92060
wixroyd.com
Material
Steel C35/C45.
Body and socket: hardened and
brown finish tempered.
Order No. Finish a/f d1
h1
l1
Xg
92060.W0008 Brown 8 17 22,0 160 85
92060.W0010 Brown 10 21 22,5 195 165
92060.W0012 Brown 12 24 26,5 235 275
92060.W0013 Brown 13 26 27,5 250 300
92060.W0014 Brown 14 27 30,5 270 420
92060.W0017 Brown 17 31 37,0 315 530
92060.W0019 Brown 19 35 41,0 345 715
92060.W0022 Brown 22 39 46,0 385 900
92060.W0024 Brown 24 43 49,0 415 975
Square Wrench, T-Handledfemale, nickel plated
92070
wixroyd.com
Material
Blade: chrome vanadium, hardened.
Nickel plated.
Handle: shock resistant black plastic
(cadmium free).
Order No. a/f l1
l2
b d Xg
92070.W0008 8 125 151 100 14 122
92070.W0010 10 125 151 100 17 150
Spanner For Shell and Mill Arbors - DIN 6368for cutter retaining screws DIN 6367
92100
wixroyd.com
Material
Steel C35/C45.
Body and socket: hardened and
brown finish tempered.
Technical Notes
* Nominal size refers to diameter of
mandrel on milling arbor.
Order No. SizeFor nut to
DIN 6367b
1d
1h
1l1
Xg
92100.W0013 13 M 6 6,1 18 16 160 75
92100.W0016 16 M 8 8,1 22 20 180 110
92100.W0022 22 M10 10,1 28 25 200 200
92100.W0027 27 M12 12,1 35 32 225 400
92100.W0032 32 M16 16,1 42 36 250 570
92100.W0040 40 M20 20,2 52 40 280 800
92100.W0050 50 M24 24,2 63 45 315 1100
92100.W0060 60 M30 28,2 76 50 355 1750
Collet Spannersfor nuts to DIN 6499
92120
wixroyd.com
Material
Steel C35/C45, hardened and zinc
plated.
Technical Notes
For use on clamping nuts to DIN
6499.
Order No. SizeFor nut to
DIN 6499Dd
1l1
b1
Xg
92120.W0016 16 16 32 163 4 180
92120.W0020 20 20 35 183 5 190
92120.W0025 25 25 42 203 6 255
92120.W0032 32 32 50 253 6 359
92120.W0040 40 40 63 285 6 550
92120.W0050 50 - 78 350 7 580
Drill Drifts - DIN 317for machine tapers DIN 228
92200
wixroyd.com
Material
Steel C35/C45, hardened and brown
finish tempered.
Order No. Size Morse taper Metric taper l1
b1
w1
Xg
92200.W0000 0 0 4 & 6 90 12 3 14
92200.W0001 1 1 & 2 - 140 20 5 70
92200.W0003 3 3 - 190 25 7 150
92200.W0004 4 4 - 225 30 10 310
92200.W0005 5 5 & 6 - 265 35 15 650
Drill Driftssemi-automatic
92220
wixroyd.com
Material
Steel C35/C45, hardened.
Blackened.
Tips
This semi-automatic drill-drift
simplifies the removal of machine
tapers (to DIN 228).
Order No. Size Morse taper l1
Xg
92220.W0003 1-3 1-3 330 370
92220.W0006 4-6 4-6 380 530
Adjustable Pin Face Spannerswith welded pins
94000
wixroyd.com
Material
Steel C35/C45, blue finish
tempered.
Technical Notes
X is preferred size, with improved
stack holding.
Size 7-40 width riveted pins, from
size 11-60 with pins electrically
welded.
Order No.
d1
For nut dia.
min. - max.
d2
-0,1
h12
l2
l1
b1
Xg
94000.W0041 7-40 1,5 2,0 115 3 40
94000.W0042 7-40 2,0 x 2,5 115 3 40
94000.W0043 7-40 2,5 3,0 115 3 40
94000.W0061 11-60 3,0 4,0 160 4 140
94000.W0062 11-60 4,0 x 5,0 160 4 140
94000.W0063 11-60 5,0 6,0 160 4 140
94000.W0101 14-100 5,0 6,0 215 6 300
94000.W0102 14-100 6,0 x 7,0 215 6 300
94000.W0103 14-100 8,0 8,0 215 6 300
94000.W0125 22-125 8,0 x 8,0 260 6 500
94000.W0126 22-125 10,0 10,0 260 6 500
94000.W0127 22-125 12,0 12,0 260 6 500
Hook Spanners, With Hook Nose - Traditionalhinge type
95100
wixroyd.com
Material
Steel C35/C45, edgewise ground,
hardened, blackened.
Stainless steel type from rust free
stainless steel.
Technical Notes
Spanners for adjustment of nuts to
DIN 1804, DIN 981 and DIN 11851.
Order No. Finish
d1
Nut dia.
min. - max.
Thread
size of nut
DIN 1804 M
Thread
size of nut
DIN 981
M
DIN
11851-F DNl1
b1
b2
Xg
95100.W0035 Blackened 20-35 8-18 1-4 - 135 3 8 40
95100.W0060 Blackened 35-60 20-38 5-8 - 175 4 11 85
95100.W0090 Blackened 60-90 40-60 9-13 - 240 6 13 250
95100.W0155 Blackened 90-155 58-110 14-24 - 300 7 15 425
95100.W0230 Blackened 155-230 105-170 24-36 - 420 8 18 1015
95100.W0901 Stainless Steel 20-35 8-18 1-4 - 135 3 8 35
95100.W0902 Stainless Steel 35-60 20-38 5-8 10-20 175 4 11 75
95100.W0903 Stainless Steel 60-90 40-60 9-13 25-40 240 5 13 185
95100.W0904 Stainless Steel 90-155 58-110 14-24 50-100 300 6 15 320
95100.W0905 Stainless Steel 155-230 105-170 24-36 125-150 420 8 18 860
Hook Spanners, With Hook Nose - Longhinge type
95110
wixroyd.com
Material
Steel C35/C45, edgewise ground,
hardened. Blackened or zinc plated.
Stainless steel type from rust free
stainless steel.
Technical Notes
Spanners for adjustment of nuts to
DIN 1804, DIN 981 and DIN 11851.
Extended hook and shank,
strengthened rivet, spring water.
Rounded edges for better handling.
Order No. Finish
d1
Nut dia.
min.- max.
Thread
size of nut
DIN 1804 M
Thread
size of nut
DIN 981
M
DIN
11851-F DNl1
b1
b2
Xg
95110.W0035 Blackened 20-35 8-18 1-4 - 165 4 10,5 85
95110.W0060 Blackened 35-60 20-38 5-8 - 210 5 12,5 170
95110.W0090 Blackened 60-90 40-60 9-13 - 280 6 14,5 360
95110.W0155 Blackened 90-155 58-110 14-24 - 335 7 17,5 610
95110.W0230 Blackened 155-230 105-170 24-36 - 460 8 17,5 1200
95110.W0535 Nickel Plated 20-35 8-18 1-4 - 165 4 10,5 85
95110.W0560 Nickel Plated 35-60 20-38 5-8 - 210 5 12,5 170
95110.W0590 Nickel Plated 60-90 40-60 9-13 - 280 6 14,5 360
95110.W0655 Nickel Plated 90-155 58-110 14-24 - 335 7 17,5 610
95110.W0730 Nickel Plated 155-230 105-170 24-36 - 460 8 17,5 1200
95110.W0901 Stainless Steel 20-35 8-18 1-4 - 165 4 10,5 85
95110.W0902 Stainless Steel 35-60 20-38 5-8 10-20 210 5 12,5 170
95110.W0903 Stainless Steel 60-90 40-60 9-13 25-40 280 6 14,5 360
95110.W0904 Stainless Steel 90-155 58-110 14-24 50-100 335 6 17,5 580
95110.W0905 Stainless Steel 155-230 105-170 24-36 125-150 460 8 17,5 1200
Hook Spanners, With Pin Nose - Traditionalhinge type
95151
wixroyd.com
Material
Steel C35/C45, edgewise ground,
hardened and brown finish
tempered.
Technical Notes
For round nuts with set pin holes
inside to DIN 1816.
X is preferred size, with improved
stock holding.
Order No. Finish
d1
Nut dia.
min. - max.
d2
l1
b1
b2
Xg
95151.W0035 Blackened 20-35 2,5 x 135 3 8 40
95151.W0036 Blackened 20-35 3,0 135 3 8 40
95151.W0037 Blackened 20-35 4,0 135 3 8 40
95151.W0060 Blackened 35-60 4,0 x 175 4 11 85
95151.W0061 Blackened 35-60 5,0 175 4 11 85
95151.W0090 Blackened 60-90 5,0 x 245 6 13 250
95151.W0091 Blackened 60-90 6,0 245 6 13 250
95151.W0155 Blackened 90-155 6,0 x 300 7 15 425
95151.W0156 Blackened 90-155 8,0 300 7 15 425
95151.W0230 Blackened 155-230 8,0 420 8 18 1015
Hook Spanners, With Pin Nose - Long Versionhinge type
95152
wixroyd.com
Material
Steel C35/C45, edgewise ground,
hardened and blue finish tempered.
Technical Notes
For round nuts with set pin holes
inside to DIN 1816.
'x' is preferred size, with improved
stock holding.
Rounded edges for better handling.
Sizes 16 - 22 without retaining ring.
Tips
Longer shaft permits higher torque.
Order No. Finish
d1
Nut dia.
min. - max.
d2
l1
b1
b2
Xg
95152.W0122 Blackened 16-22 2,5 135 3 7,5 50
95152.W0135 Blackened 22-35 3,0 165 4 10,5 85
95152.W0160 Blackened 35-60 4,0 205 5 12,5 170
95152.W0190 Blackened 60-90 5,0 x 280 6 14,5 380
95152.W0191 Blackened 60-90 6,0 280 6 14,5 380
95152.W0255 Blackened 95-155 6,0 x 335 7 17,5 610
95152.W0256 Blackened 95-155 8,0 335 7 17,5 610
95152.W0330 Blackened 165-230 8,0 460 8 17,5 1200
95152.W0331 Blackened 165-230 10,0 x 460 8 17,5 1200
95152.W0622 Nickel Plated 16-22 2,5 135 3 7,5 50
95152.W0635 Nickel Plated 22-35 3,0 165 4 10,5 85
95152.W0660 Nickel Plated 35-60 4,0 205 5 12,5 170
95152.W0690 Nickel Plated 60-90 6,0 280 6 14,5 380
95152.W0755 Nickel Plated 95-155 6,0 335 7 17,5 610
95152.W0830 Nickel Plated 165-230 10,0 460 8 17,5 1200
Face Spanners, With Pinsfixed - DIN 3116A
95340
wixroyd.com
Material
Steel C35/C45, blue finish
tempered.
Technical Notes
Pins spot welded.
Tips
( ) not to DIN Standard.
** Standard size for typical angle
grinders.
Order No.d
1For nut dia.
d2
-0,1
h12
l2
l1
b1
Xg
95340.W0013 13 2,5 3,0 90 3 27
95340.W0015 15 3,0 4,0 90 3 27
95340.W0020 20 (3,0) 4,0 122 4 50
95340.W0021 20 4,0 5,0 122 4 50
95340.W0025 25 3,0 4,0 137 4 65
95340.W0026 25 4,0 5,0 137 4 65
95340.W0030 30 4,0 5,0 164 5 105
95340.W0035 35 5,0 6,0 180 5 130
95340.W0036 35 (4,0) 5,0 180 5 120
95340.W0040 40 4,0 5,0 167 5 120
95340.W0045 45 4,0 5,0 187 5 145
95340.W0050 50 5,0 6,0 198 5 175
95340.W0060 60 5,0 6,0 213 6 220
95340.W0075 75 6,0 7,0 243 6 330
95340.W0090 90 7,0 7,5 270 8 410
Face Spanners, With Pinsadjustable
95350
wixroyd.com
Material
Steel C35/C45, blue finish
tempered.
Technical Notes
Fixed pin spot welded. For
replacement pins see part no.
95360.
Tips
X is preferred size, with improved
stock holding.
Order No. Type
d1
Nut dia.
min. - max.
d2
-0,1
h12
l2
l1
b1
Xg
95350.W0041 Fixed Pin 18-40 3,0x 4,0 150 5 100
95350.W0042 Fixed Pin 18-40 4,0 5,0 150 5 100
95350.W0081 Fixed Pin 40-80 4,0x 5,0 220 6 265
95350.W0082 Fixed Pin 40-80 5,0 6,0 220 6 265
95350.W0083 Fixed Pin 40-80 6,0 7,0 220 6 265
95350.W0125 Fixed Pin 80-125 6,0x 7,0 295 8 650
95350.W0126 Fixed Pin 80-125 7,0 7,5 295 8 650
95350.W0127 Fixed Pin 80-125 8,0 8,0 295 8 650
95350.W0201 Fixed Pin 125-200 8,0x 8,0 405 10 1590
95350.W0202 Fixed Pin 125-200 10,0 10,0 405 10 1590
95350.W0541 Replaceable Pin 18-40 3,0 4,0 150 5 100
95350.W0542 Replaceable Pin 18-40 4,0 5,0 150 5 100
95350.W0581 Replaceable Pin 40-80 4,0 5,0 220 6 265
95350.W0582 Replaceable Pin 40-80 5,0 6,0 220 6 265
95350.W0583 Replaceable Pin 40-80 6,0 7,0 220 6 265
95350.W0625 Replaceable Pin 80-125 6,0 7,0 295 8 650
95350.W0626 Replaceable Pin 80-125 7,0 7,5 295 8 650
95350.W0627 Replaceable Pin 80-125 8,0 8,0 295 8 650
95350.W0701 Replaceable Pin 125-200 8,0 8,0 405 10 1590
95350.W0702 Replaceable Pin 125-200 10,0 10,0 405 10 1590
Replacement Pinsfor face spanners 95350
95360
wixroyd.com
Material
Steel C35/C45, hardened and blue
finish tempered.
Order No.
d2
Pin dia.
-0,1
h12
d1
l mFor use with 95350 with
d1
nut dia. ofX
g
95360.W0002 3 5,5 4,0 M 4 18-40 2
95360.W0003 4 7,0 5,0 M 4 18-40 2
95360.W0007 4 7,0 4,5 M 5 40-80 3
95360.W0008 5 8,5 5,5 M 5 40-80 4
95360.W0009 6 10,0 6,5 M 6 40-80 5
95360.W0010 4 8,5 4,5 M 6 40-80/80-125 3
95360.W0011 5 8,5 5,5 M 6 40-80/80-125 5
95360.W0012 6 10,0 6,5 M 6 40-80/80-125 7
95360.W0013 7 11,0 7,0 M 6 40-80/80-125 8
95360.W0014 8 12,0 7,5 M 6 40-80/80-125 9
95360.W0017 8 12,0 7,5 M 8 125-200 14
95360.W0019 10 15,0 9,5 M 8 125-200 19
Hook Spanners, With Hook Nosefixed - DIN 1810A
95400
wixroyd.com
Material
Steel C35/C45, hardened.
Blackened. Edgewise ground.
Technical Notes
Specials available on request,
subject to minimum quantities.
Tips
Items marked *, thickness varies
from DIN Standard. For slotted nuts
to DIN 1804 and DIN 981.
Order No.
d1
Nut dia.
min. - max.
Thread size of
nut DIN 1804 M
Thread size of
nut DIN 981 Ml1
b1
Xg
95400.W0014 12-14 - - 110 3 25
95400.W0020 16-20 6-8 10 110 3 25
95400.W0028 25-28 10-12 15-17 136 4 45
95400.W0032 30-32 14-16 20 136 4 50
95400.W0036 34-36 18-20 - 170 5 90
95400.W0042 40-42 22-24 - 170 5 90
95400.W0050 45-50 26-30 30 206 6 155
95400.W0055 52-55 32-35 25 206 6 160
95400.W0062 58-62 38-42 40 240 7 260
95400.W0075 68-75 45-50 55 240 7 255
95400.W0090 80-90 52-60 60 280 8 410
95400.W0100 95-100 62-70 - 280 8 405
95400.W0115 110-115 72-80 85 335 10 745
95400.W0130 120-130 85-90 90-100 335 10 720
95400.W0146 135-145 95-100 110 385 10* 1000
95400.W0166 155-165 105-120 120-130 385 10* 965
95400.W0196 180-195 125-140 140-150 470 10* 1500
95400.W0221 205-220 150-160 170 470 10* 1580
95400.W0246 230-245 170-180 180 568 10* 2250
95400.W0271 260-270 190-200 - 568 10* 2250
95400.W0300 280-300 - - 680 15 5150
95400.W0320 300-320 - - 695 15 5100
95400.W0345 320-345 - - 695 15 5200
95400.W0375 350-375 - - 735 15 5200
95400.W0400 380-400 - - 770 15 6700
95400.W0500 480-500 - - 988 20 13000
Hook Spanners, With Hook Nosefixed - DIN 1810A
95400
wixroyd.com
Material
Steel C35/C45, hardened.
Blackened. Edgewise ground.
Technical Notes
Specials available on request,
subject to minimum quantities.
Tips
Items marked *, thickness varies
from DIN Standard. For slotted nuts
to DIN 1804 and DIN 981.
Hook Spanners, With Hook Nosespring loaded, adjustable
95420
wixroyd.com
Material
Steel C35/C45, hardened.
Blackened.
Tips
For slotted nuts DIN 1804 and DIN
981.
Order No.
d1
Nut dia.
min. - max.
l1
b1
Xg
95420.W0002 20-42 180 4,0 100
95420.W0005 45-90 240 6,0 250
95420.W0009 95-165 335 10,0 710
Hook Spanners, With Pin Nosefixed - DIN 1816
95450
wixroyd.com
Material
Steel C35/C45, hardened and
blackened. Edgewise ground.
Technical Notes
Specials available on request,
including stainless steel models -
subject to minimum quantities.
Tips
Items marked *, thickness varies
from DIN Standard. For round nuts
with set pin holes to DIN 1816.
Order No.
d1
Nut dia.
min. - max.
Thread size of
nut
DIN 1816M
d2
a11
l2
l1
b1
Xg
95450.W0014 12-14 - 2,0 2,0 110 3 25
95450.W0018 16-18 6 2,5 2,5 110 3 25
95450.W0022 20-22 8 2,5 2,5 110 3 25
95450.W0028 25-28 10-12 3,0 3,0 136 4 55
95450.W0032 30-32 14-16 4,0 3,0 136 4 55
95450.W0036 34-36 18-20 4,0 3,5 170 5 100
95450.W0042 40-42 22-24 4,0 3,5 170 5 100
95450.W0050 45-50 26-30 5,0 4,0 206 6 165
95450.W0055 52-55 32-35 5,0 4,0 206 6 165
95450.W0062 58-62 38-42 5,0 5,0 240 7 270
95450.W0075 68-75 45-50 6,0 5,0 240 7 270
95450.W0090 80-90 52-60 6,0 6,0 280 8 410
95450.W0100 95-100 62-70 8,0 6,0 280 8 410
95450.W0115 110-115 72-80 8,0 8,0 335 10 610
95450.W0130 120-130 85-90 8,0 8,0 335 10 610
95450.W0146 135-145 95-100 8,0 8,0 380 10* 790
95450.W0166 155-165 105-120 8,0 8,0 380 10* 790
95450.W0196 180-195 125-140 10,0 8,0 470 10* 1500
95450.W0221 205-220 150-160 10,0 8,0 470 10* 1580
95450.W0246 230-245 170-180 10,0 10,0 568 10* 2250
95450.W0271 260-270 190-200 10,0 10,0 568 10* 2250
Chip Hookswith flexible guard
97050
wixroyd.com
Material
Hook and guard: steel.
Handle: wood.
Technical Notes
Excellent for removing swarf or
chips from in and around work piece
- extended hook minimises risk to
operator.
Part number 97050.W2050 has rigid
fixing (brazed-soldered).
All other parts have flexible fixing
(rubber).
Important Notes
Take all necessary safety
precautions when using this
product in or around working
machinery - if in doubt shut down
machinery.
Order No. d1
l1
l2
l3
d2
97050.W2020 5 180 125 305 115
97050.W2030 6 300 130 410 130
97050.W2040 6 400 130 530 140
97050.W2050 6 400 130 530 140
Chip Hookswith hand guard
97052
wixroyd.com
Material
Hook: steel.
Guard: plastic.
Handle: wood.
Technical Notes
Excellent for removing swarf or
chips from in and around work piece
- extended hook minimises risk to
operator.
Important Notes
Take all necessary safety
precautions when using this
product in or around working
machinery - if in doubt shut down
machinery.
Order No. d1
l1
l2
l3
d2
97052.W2060 6 400 180 570 180
97052.W2070 7 500 180 670 180
Chip Hooks - with Guardwith hand guard and extended handle
97053
wixroyd.com
Material
Hook: steel.
Guard: plastic.
Handle: wood.
Technical Notes
Excellent for removing swarf or
chips from in and around work piece
- extended hook minimises risk to
operator.
Important Notes
Take all necessary safety
precautions when using this
product in or around working
machinery - if in doubt shut down
machinery.
Order No. d1
l1
l2
l3
d2
97053.W2080 7 500 320 820 180
97053.W2090 8 800 320 1120 180
97053.W2100 8 1000 320 1320 180
Chip Pincerswith hand guard
97060
wixroyd.com
Material
Handle and cutter: steel.
Guard: plastic or aluminium.
Important Notes
Take all necessary safety
precautions when using this
product in or around working
machinery - if in doubt shut down
machinery.
Order No. Guard type l1
l2
l3
d1
97060.W1025 Aluminium 175 155 330 85
97060.W1035 Plastic 175 180 355 180
Chip Cutter and Hookwith hand guard
97061
wixroyd.com
Material
Handle and cutter: steel.
Guard: plastic or aluminium.
Technical Notes
Max. capacity of cutter is clip
section of 1.5mm sq e.g. 0,25 x
6mm
Tips
97061 has added benefit of hook as
well as cutter for improved removal
of difficult to reach swarf/chips.
Important Notes
Take all necessary safety
precautions when using this
product in or around working
machinery - if in doubt shut down
machinery.
Order No. Guard type l1
l2
l3
d1
97061.W1050 Aluminium 165 155 320 85
97061.W1060 Plastic 165 180 345 180
Application selection chart
TPE-
soft
Soft
Com-
posite
rubber
Med
TPE-
mid
Med
Plastic
Hard
Super
plastic
Med
Nylon
Hard
Alu
Hard
Copper
Hard
98301
wood
98301
steel
98301
fibre
98310 98321 98401 98330
Range of inserts for Simplex Mallets 98001 to 98224
Construction applications
Paving • • •Floor tiling • •
Curbstone setting / Masonry work • •Concrete form set-up • •Scaffold construction • • • •
Tent and hall construction • • •Gardening and landscaping • •
Home construction • •
Metal-working industry applications
Automotive assembly and repair work • • • • • • • • • • • •Positioning of workpieces in a vice • • • • •
Straightening work • • • • •Joining of workpieces • • • • • • •
Repair and maintenance work • • • • • • • •Car body work • • • • • • • • •
Sheet metal working • • • • • • • • •Dent removal • • • • • • • •
Housing assembly • • • • • • • •Mould construction • • •
Assembly of sharp-edged workpieces • • • • • •
Wood-working applications
Furniture assembly • • • •Window and door construction • • • •
Prefabricated house construction •Joiner’s work • • • •
Carpenter’s work •Floor parqueting / laminating •
Agriculture and forestry applications
Fence construction • • •Wood splitting with wedge • •
Maintenance and repair work on
agricultural machinery• • •
Application selection chart
0845 26 66 577 info@wixroyd.com
Soft Face Mallets and Hammerso
v-98
00
1-9
85
02
-a - Up
dated
- 12
-01
-20
17
Simplex Malletswith cast iron housing and wooden handle
98001
wixroyd.com
Technical Notes
For full range of inserts see part
98004.
Tips
Inserts, housings and handles can
be bought separately creating a
flexible easy to use modular mallet
system.
Order No. Inserts w1
l1
Xg
98001.W0130 TPE Soft - Blue 30 90 300 345
98001.W0140 TPE Soft - Blue 40 110 330 620
98001.W0150 TPE Soft - Blue 50 135 350 1170
98001.W0160 TPE Soft - Blue 60 145 405 1530
98001.W0230 Composite Rubber - Black 30 90 300 340
98001.W0240 Composite Rubber - Black 40 110 330 650
98001.W0250 Composite Rubber - Black 50 135 350 1170
98001.W0260 Composite Rubber - Black 60 145 405 1600
98001.W0280 Composite Rubber - Black 80 175 490 2950
98001.W0330 TPE - Mid Grey 30 90 300 335
98001.W0340 TPE - Mid Grey 40 110 330 610
98001.W0350 TPE - Mid Grey 50 135 350 1110
98001.W0360 TPE - Mid Grey 60 145 405 1480
98001.W0430 Plastic - Red 30 90 300 340
98001.W0440 Plastic - Red 40 110 330 620
98001.W0450 Plastic - Red 50 135 350 1130
98001.W0460 Plastic - Red 60 145 405 1490
98001.W0530 Super Plastic - White 30 90 300 330
98001.W0540 Super Plastic - White 40 110 330 600
98001.W0550 Super Plastic - White 50 135 350 1100
98001.W0560 Super Plastic - White 60 145 405 1290
98001.W0580 Super Plastic - White 80 175 490 2930
98001.W0630 Nylon - White 30 90 300 335
98001.W0640 Nylon - White 40 110 330 610
98001.W0650 Nylon - White 50 135 350 1145
98001.W0660 Nylon - White 60 145 405 1510
98001.W0680 Nylon - White 80 175 490 3090
Simplex Malletswith cast iron housing and wooden handle
98001
wixroyd.com
Technical Notes
For full range of inserts see part
98004.
Tips
Inserts, housings and handles can
be bought separately creating a
flexible easy to use modular mallet
system.
Order No. Inserts w1
l1
Xg
98001.W0730 Aluminium 30 90 300 390
98001.W0740 Aluminium 40 110 330 750
98001.W0750 Aluminium 50 135 350 1380
98001.W0760 Aluminium 60 145 405 1940
98001.W0780 Aluminium 80 175 490 3830
Simplex Malletshousing for no. 98001
98002
wixroyd.com
Material
Cast iron housing (2 parts).
Order No.For mallet head
d1
d1
98002.W0131 30 30
98002.W0141 40 40
98002.W0151 50 50
98002.W0161 60 60
98002.W0181 80 80
Simplex Malletshandle for no. 98001
98003
wixroyd.com
Material
Wooden handle.
Order No.For mallet head
d1
d1
l1
98003.W0231 30 30 260
98003.W0241 40 40 275
98003.W0251 50 50 310
98003.W0261 60 60 335
98003.W0281 80 80 395
Simplex Malletsinserts for no. 98001, 98103 & 98101
98004
wixroyd.com
Important Notes
Aluminium inserts
98004.W0733-W0788 not for use
in light alloy housings 98022.
Copper inserts 98004.W0833 and
W0844 only for use in reinforced
housing no. 98002.
Order No. TypeFor mallet head
d1
98004.W0133 TPE Soft - Blue 30
98004.W0144 TPE Soft - Blue 40
98004.W0155 TPE Soft - Blue 50
98004.W0166 TPE Soft - Blue 60
98004.W0233 Composite Rubber - Black 30
98004.W0244 Composite Rubber - Black 40
98004.W0255 Composite Rubber - Black 50
98004.W0266 Composite Rubber - Black 60
98004.W0288 Composite Rubber - Black 80
98004.W0333 TPE Mid - Grey 30
98004.W0344 TPE Mid - Grey 40
98004.W0355 TPE Mid - Grey 50
98004.W0366 TPE Mid - Grey 60
98004.W0433 Plastic - Red 30
98004.W0444 Plastic - Red 40
98004.W0455 Plastic - Red 50
98004.W0466 Plastic - Red 60
98004.W0533 Super Plastic - White 30
98004.W0544 Super Plastic - White 40
98004.W0555 Super Plastic - White 50
98004.W0566 Super Plastic - White 60
98004.W0588 Super Plastic - White 80
98004.W0633 Nylon - White 30
98004.W0644 Nylon - White 40
98004.W0655 Nylon - White 50
98004.W0666 Nylon - White 60
98004.W0688 Nylon - White 80
98004.W0733 Aluminium 30
98004.W0744 Aluminium 40
98004.W0755 Aluminium 50
98004.W0766 Aluminium 60
98004.W0788 Aluminium 80
98004.W0833 Copper - With Plastic Bush 30
98004.W0844 Copper - With Plastic Bush 40
Simplex Malletswith light alloy housing and wooden handle
98021
wixroyd.com
Technical Notes
For full range of inserts see part
98004.
Important Notes
Soft metal inserts no.
98004.W0733-W0788 must not be
used in light alloy housing no.
98021 or 98022.
Order No. Insert type w1
l1
Xg
98021.W0130 TPE - Soft Blue 30 90 300 180
98021.W0140 TPE - Soft Blue 40 110 330 380
98021.W0150 TPE - Soft Blue 50 135 350 640
98021.W0160 TPE - Soft Blue 60 145 405 880
98021.W0230 TPE - Rubber 30 90 300 280
98021.W0240 TPE - Rubber 40 110 330 350
98021.W0250 TPE - Rubber 50 135 350 610
98021.W0260 TPE - Rubber 60 145 405 860
98021.W0330 TPE - Mid Grey 30 90 300 200
98021.W0340 TPE - Mid Grey 40 110 330 380
98021.W0350 TPE - Mid Grey 50 135 350 620
98021.W0360 TPE - Mid Grey 60 145 405 860
98021.W0430 Plastic - Red 30 90 300 190
98021.W0440 Plastic - Red 40 110 330 370
98021.W0450 Plastic - Red 50 135 350 620
98021.W0460 Plastic - Red 60 145 405 830
98021.W0530 Super Plastic - White 30 90 300 180
98021.W0540 Super Plastic - White 40 110 330 380
98021.W0550 Super Plastic - White 50 135 350 580
98021.W0560 Super Plastic - White 60 145 405 790
98021.W0630 Nylon - White 30 90 300 190
98021.W0640 Nylon - White 40 110 330 370
98021.W0650 Nylon - White 50 135 350 615
98021.W0660 Nylon - White 60 145 405 850
Simplex Malletswith light alloy housing and wooden handle
98021
wixroyd.com
Technical Notes
For full range of inserts see part
98004.
Important Notes
Soft metal inserts no.
98004.W0733-W0788 must not be
used in light alloy housing no.
98021 or 98022.
Simplex Malletslight alloy housing for no. 98021
98022
wixroyd.com
Material
Light alloy housing (2 parts).
Order No.For mallet head
d1
d1
98022.W0131 30 30
98022.W0141 40 40
98022.W0151 50 50
98022.W0161 60 60
Simplex Malletswooden handle for no. 98021
98023
wixroyd.com
Material
Wooden handle.
Order No.For mallet head
d1
l1
98023.W0231 30 260
98023.W0241 40 270
98023.W0251 50 310
98023.W0261 60 335
98023.W0281 80 395
Simplex Mallets - Type C - Blackwith cast iron housing and fibre glass handle
98101
wixroyd.com
Technical Notes
For full range of inserts see part
98004.
Tips
Inserts, housings and handles can
be bought separately to create a
flexible easy to use modular mallet.
Order No. Inserts w1
l1
Xg
98101.W0130 TPE Soft - Blue 30 90 300 410
98101.W0140 TPE Soft - Blue 40 110 330 880
98101.W0150 TPE Soft - Blue 50 135 330 1180
98101.W0160 TPE Soft - Blue 60 145 410 1720
98101.W0230 Composite Rubber - Black 30 90 300 410
98101.W0240 Composite Rubber - Black 40 110 330 880
98101.W0250 Composite Rubber - Black 50 135 330 1250
98101.W0260 Composite Rubber - Black 60 145 410 2900
98101.W0280 Composite Rubber - Black 80 175 490 3380
98101.W0330 TPE Mid - Grey 30 90 300 400
98101.W0340 TPE Mid - Grey 40 110 330 850
98101.W0350 TPE Mid - Grey 50 135 330 1180
98101.W0360 TPE Mid - Grey 60 145 410 1590
98101.W0430 Plastic - Red 30 90 300 400
98101.W0440 Plastic - Red 40 110 330 880
98101.W0450 Plastic - Red 50 135 330 1150
98101.W0460 Plastic - Red 60 145 410 1680
98101.W0530 Super Plastic - White 30 90 300 430
98101.W0540 Super Plastic - White 40 110 330 860
98101.W0550 Super Plastic - White 50 135 330 1200
98101.W0560 Super Plastic - White 60 145 410 1700
98101.W0580 Super Plastic - White 80 175 490 3230
98101.W0630 Nylon - White 30 90 300 440
98101.W0640 Nylon - White 40 110 330 860
98101.W0650 Nylon - White 50 135 330 1240
98101.W0660 Nylon - White 60 145 410 1770
98101.W0680 Nylon - White 80 175 490 3390
Simplex Mallets - Type C - Blackwith cast iron housing and fibre glass handle
98101
wixroyd.com
Technical Notes
For full range of inserts see part
98004.
Tips
Inserts, housings and handles can
be bought separately to create a
flexible easy to use modular mallet.
Order No. Inserts w1
l1
Xg
98101.W0730 Aluminium 30 90 300 490
98101.W0740 Aluminium 40 110 330 1000
98101.W0750 Aluminium 50 135 330 1480
98101.W0760 Aluminium 60 145 410 2190
98101.W0780 Aluminium 80 175 490 4130
98101.W0830 Copper - With Bush 30 90 300 680
98101.W0840 Copper - With Bush 40 110 330 1400
Simplex Mallets - Type Creinforced housing for no. 98101
98102
wixroyd.com
Material
Reinforced housing (2 parts,
malleable cast iron).
Order No.For mallet head
d1
d1
98102.W0131 30 30
98102.W0141 40 40
98102.W0151 50 50
98102.W0161 60 60
98102.W0181 80 80
Simplex Mallets - Type Cfibre glass handle for no. 98101
98103
wixroyd.com
Material
Fibre glass handle.
Order No.For mallet head
d1
l1
98103.W0231 30 260
98103.W0241 40 267
98103.W0251 50 267
98103.W0261 60 340
98103.W0281 80 400
98103.W0282 80 700
Simplex Sledge Hammerswith malleable cast iron housing and wooden handle
98201
wixroyd.com
Tips
Inserts, housings and handles can
be bought separately creating a
flexible easy to use modular mallet
system. For full range of inserts see
part 98204.Order No. d
1Inserts w
1l1
Xg
98201.W0081 80 Super Plastic - White 175 800 3240
98201.W0100 100 Super Plastic - White 200 1000 5300
98201.W0125 125 Super Plastic - White 215 1040 6700
98201.W0140 140 Super Plastic - White 215 1045 7300
98201.W0181 80 Composite Rubber - Black 175 800 3250
98201.W0281 80 Composite Rubber - Black/Super Plastic White 175 800 3200
Simplex Sledge Hammershandles for no. 98201
98202
wixroyd.com
Material
Handle: wood.
Order No.For mallet head
d1
l1
98202.W0208 80 700
98202.W0210 100 900
98202.W0215 125 900
98202.W0240 140 900
Simplex Sledge Hammershousing for no. 98201
98203
wixroyd.com
Material
Cast iron housing (2 parts).
Order No.For mallet head
d1
d1
98203.W0300 80 80
98203.W0310 100 100
98203.W0325 125 125
98203.W0340 140 140
Simplex Sledge Hammersinserts for no. 98201
98204
wixroyd.com
Material
Composite rubber: black.
Superplastic: white.
Order No. InsertsFor mallet head
d1
98204.W0288 Composite Rubber - Black 80
98204.W0588 Super Plastic - White 80
98204.W0590 Super Plastic - White 100
98204.W0592 Super Plastic - White 125
98204.W0594 Super Plastic - White 140
Simplex Sledge Hammers - Type C - Blackwith reinforced housing, fibre glass handle & aluminium insert
98221
wixroyd.com
Material
Insert: aluminium.
Tips
For full range of inserts see part
98224.
Order No. d1
w1
l1
Xg
98221.W0081 80 175 800 4410
Simplex Sledge Hammers - Type Creinforced housing, for 98221
98222
wixroyd.com
Material
Reinforced housing (2 parts,
malleable cast iron).
Order No.For mallet head
d1
98222.W0181 80
Simplex Sledge Hammers - Type Chandle for 98221
98223
wixroyd.com
Material
Fibre glass handle.
Important Notes
Fibre glass handles must only be
mounted on reinforced malleable
cast iron housing - black
98222.W0181.
Order No.For mallet head
d1
l1
98223.W0208 80 700
Simplex Sledge Hammers - Type Cinsert for 98221
98224
wixroyd.com
Material
Aluminium.
Order No. TypeFor mallet head
d1
98224.W0788 Aluminium 80
Supercraft Non-Rebound Malletsnylon insert
98301
wixroyd.com
Material
Housing: steel, shot filled.
Inserts: nylon, made from extruded
tube material.
Handle: wood, fibre glass or steel.
Steel and fibre glass handles
include rubber grip.
Technical Notes
Shot filled housing results in a
non-rebound action and assists in
full transmission of impact force.
Inserts are replaceable.
Order No. Handle type w1
l1
Xg
98301.W0020 Wood 20 105 300 230
98301.W0025 Wood 25 105 305 300
98301.W0030 Wood 30 110 330 430
98301.W0035 Wood 35 110 335 550
98301.W0040 Wood 40 115 360 750
98301.W0045 Wood 45 120 365 850
98301.W0050 Wood 50 120 370 1000
98301.W0060 Wood 60 145 370 1700
98301.W0070 Wood 70 150 370 2300
98301.W0080 Wood 80 168 380 3300
98301.W0125 Steel 25 105 270 370
98301.W0130 Steel 30 110 290 580
98301.W0135 Steel 35 110 295 700
98301.W0140 Steel 40 115 300 850
98301.W0145 Steel 45 120 305 900
98301.W0150 Steel 50 120 310 1200
98301.W0160 Steel 60 145 325 1780
98301.W0170 Steel 70 150 335 2400
98301.W0240 Fibre Glass 40 116 370 780
98301.W0250 Fibre Glass 50 120 380 1090
98301.W0260 Fibre Glass 60 145 390 1660
Supercraft Non-Rebound Malletsnylon insert
98301
wixroyd.com
Material
Housing: steel, shot filled.
Inserts: nylon, made from extruded
tube material.
Handle: wood, fibre glass or steel.
Steel and fibre glass handles
include rubber grip.
Technical Notes
Shot filled housing results in a
non-rebound action and assists in
full transmission of impact force.
Inserts are replaceable.
Supercraft Malletshickory handle for no. 98301
98302
wixroyd.com
Material
Handle: hickory wood.
Order No.For mallet head
d1
l1
98302.W0320 20 280
98302.W0325 25 280
98302.W0330 30 300
98302.W0330 35 300
98302.W0340 40 315
98302.W0340 45 315
98302.W0340 50 315
98302.W0360 60 300
98302.W0360 70 300
98302.W0360 80 300
Supercraft Malletsnylon insert for no. 98301
98303
wixroyd.com
Material
Insert: nylon white.
Order No. TypeFor mallet head
d1
98303.W0420 Nylon - White 20
98303.W0425 Nylon - White 25
98303.W0430 Nylon - White 30
98303.W0435 Nylon - White 35
98303.W0440 Nylon - White 40
98303.W0445 Nylon - White 45
98303.W0450 Nylon - White 50
98303.W0460 Nylon - White 60
98303.W0470 Nylon - White 70
98303.W0480 Nylon - White 80
Black Craft Non-Rebound Malletswith steel head and rubber grip handle
98310
wixroyd.com
Material
Housing: steel, polyurethane
coating.
Handle: steel, ergonomic rubber
grip.
Technical Notes
Shot filled housing results in a
non-rebound action and assists in
full transmission of impact force.
Tips
Automobile assembly and repair
work, positioning of work pieces in
the vice, sheet-metal working, dent
removal.
Order No. d1
w1
l1
Xg
98310.W0040 40 110 300 700
98310.W0050 50 115 310 1000
98310.W0060 60 120 315 1300
Black Craft Non-Rebound Malletswith steel head and rubber grip handle
98310
wixroyd.com
Material
Housing: steel, polyurethane
coating.
Handle: steel, ergonomic rubber
grip.
Technical Notes
Shot filled housing results in a
non-rebound action and assists in
full transmission of impact force.
Tips
Automobile assembly and repair
work, positioning of work pieces in
the vice, sheet-metal working, dent
removal.
Secural Non-Rebound Malletshead from cut steel plate with rubber grip handle
98321
wixroyd.com
Material
Housing: from cut steel plate.
Handle: sheet metal, ergonomic
rubber grip.
Inserts: polyurethane, yellow.
Medium hard.
Technical Notes
Shot filled housing results in a
non-rebound action and assists in
full transmission of impact force.
Inserts are replaceable.
Tips
Automobile assembly and repair
work, positioning of work pieces in
the vice, furniture assembly,
window and door construction,
joiner's work.
Order No. d1
w1
l1
Xg
98321.W0040 30x40 117 300 700
Secural Non-Rebound Malletshead from cut steel plate with rubber grip handle
98321
wixroyd.com
Material
Housing: from cut steel plate.
Handle: sheet metal, ergonomic
rubber grip.
Inserts: polyurethane, yellow.
Medium hard.
Technical Notes
Shot filled housing results in a
non-rebound action and assists in
full transmission of impact force.
Inserts are replaceable.
Tips
Automobile assembly and repair
work, positioning of work pieces in
the vice, furniture assembly,
window and door construction,
joiner's work.
Secural Malletspolyurethane insert for 98321
98322
wixroyd.com
Material
Insert: polyurethane, yellow.
Technical Notes
Replacement inserts for secural
mallet no. 98321.
Order No.For mallet size
d1
x w1
98322.W0141 30x40
Ferroplex-Combination Tool 98330
wixroyd.com
Material
Head: steel.
Handle: steel tube, with rubber
grip.
Hammer faces: 1 x heat treated
steel induction hardened. 1 x nylon
- white.
Technical Notes
Nylon insert can be replaced, see
replacement part 98363.W0480 and
98363.W0482.
Tips
For use in assembly work,
automotive industry as well as
general maintenance and service
applications.
Order No. d1
w1
l1
Xg
98330.W0030 30 104 290 600
98330.W0035 35 104 295 800
Ferroplex-Combination Tool 98330
wixroyd.com
Material
Head: steel.
Handle: steel tube, with rubber
grip.
Hammer faces: 1 x heat treated
steel induction hardened. 1 x nylon
- white.
Technical Notes
Nylon insert can be replaced, see
replacement part 98363.W0480 and
98363.W0482.
Tips
For use in assembly work,
automotive industry as well as
general maintenance and service
applications.
Supercraft Non-Rebound Sledge Hammersnylon insert
98361
wixroyd.com
Material
Housing: steel, shot filled.
Inserts: nylon, made from extruded
tube material.
Handle: wood.
Technical Notes
Shot filled housing results in a
non-rebound action and assists in
full transmission of impact force.
Inserts are replaceable see part
98363.
Order No. d1
w1
l1
Xg
98361.W0080 80 200 880 4000
98361.W0100 100 210 1000 7000
Supercraft Non-Rebound Sledge Hammersnylon insert
98361
wixroyd.com
Material
Housing: steel, shot filled.
Inserts: nylon, made from extruded
tube material.
Handle: wood.
Technical Notes
Shot filled housing results in a
non-rebound action and assists in
full transmission of impact force.
Inserts are replaceable see part
98363.
Supercraft Sledge Hammershandle for 98361
98362
wixroyd.com
Material
Handle: wooden.
Order No.For mallet head
d1
l1
98362.W0381 80 800
98362.W0382 100 900
Supercraft Sledge Hammersinserts for no. 98361
98363
wixroyd.com
Material
Insert: nylon white.
Order No. TypeFor mallet head
d1
98363.W0480 Nylon - White 80
98363.W0482 Nylon - White 100
Splitting Maul Simplex Mallet 98381
wixroyd.com
Material
Housing: malleable Cast iron.
Handle: wood, hickory.
Inserts: superplastic, white. Medium
hard.
Splitting Maul: carbon steel,
drop-forged and hardened, with
turned nose.
Technical Notes
Two tools in one, both splitting
maul for wood harvesting and soft
face mallet for hammering stakes
and fencing posts.
Tips
Safety approved by VPA RewScheid.
Please follow general safetyinstructions and guidelines typicalfor use of powertools and cuttingequipment. Wear suitableprotective clothing and eyewear.
Important Notes
Do not strike steel with thesplitting insert - can result insplintering and injury. Use onlyoriginal Wixroyd Simplex Malletparts when replacing handle orinserts.
Order No. Inserts w1
l1
Xg
98381.W0065 Splitting Maul/Super Plastic 60 65 900 4100
Splitting Maul Simplex Malletcast iron housing for no. 98381
98382
wixroyd.com
Material
Malleable Cast Iron housing
Important Notes
Cast iron housing Part no.
98382.W0160 must only be used
with spare parts of the Simplex
Splitting Maul.
Order No.For mallet head
d1
d1
Xg
98382.W0160 160 160 1900
Splitting Maul Simplex Malletwooden handle for no. 98381
98383
wixroyd.com
Material
Hickory
Important Notes
Hickory handles part 98383.W0260
must only be mounted into cast iron
housing 98382.W0160.
Order No. Mallet size d1
l1
Xg
98383.W0260 160 160 850 750
Splitting Maul Simplex Malletinserts for no. 98381
98384
wixroyd.com
Material
Splitting Maul: carbon steel, drop
forged and tempered.
Plastic Insert: superplastic, white.
Order No. TypeFor mallet head
d1
d1
Xg
98384.W0360 Splitting Maul 160 160 1340
Rebound Punchesnylon insert
98401
wixroyd.com
Material
Insert: nylon, white.
Technical Notes
Inserts are replaceable see part
98402.
Order No. Type d1
l1
Xg
98401.W0010 Nylon - White 10 168 100
98401.W0012 Nylon - White 12 170 130
98401.W0015 Nylon - White 15 175 200
Rebound Punchesreplaceable nylon insert for 98421
98402
wixroyd.com
Material
Insert: nylon white.
Order No. TypeFor mallet head
d1
98402.W0110 Nylon - White 10
98402.W0112 Nylon - White 12
98402.W0115 Nylon - White 15
Non-Rebound Drop Malletsnylon insert
98421
wixroyd.com
Material
Housing: steel.
Insert: nylon - white.
Technical Notes
Shot filled housing results in a
non-rebound action and assists in
full transmission of impact force.
Inserts are replaceable. See part
98422.
Order No. d1
l1
Xg
98421.W0020 20 150 220
98421.W0025 25 150 330
98421.W0030 30 155 460
98421.W0035 35 155 650
98421.W0040 40 160 820
98421.W0045 45 160 1000
98421.W0050 50 165 1250
Non-Rebound Drop Malletsreplaceable nylon insert for 98421
98422
wixroyd.com
Material
Insert: nylon - white.
Order No. TypeFor mallet head
d1
98422.W0120 Nylon - White 20
98422.W0125 Nylon - White 25
98422.W0130 Nylon - White 30
98422.W0135 Nylon - White 35
98422.W0140 Nylon - White 40
98422.W0145 Nylon - White 45
98422.W0150 Nylon - White 50
MaxxCraft Locksmith's Hammer 98501
wixroyd.com
Material
Head: drop-forged, high quality
Steel. Face ground, chamfered
edge.
Handle: hickory, with protective
rubber sleeve to reduce rebound
and increase power of impact while
reducing shock and vibration in the
users arm.
Order No. l1
Xg
98501.W0030 300 300
98501.W0032 320 500
98501.W0035 350 800
98501.W0036 360 1000
MaxxCraft Handlereplacement handle for part 98501
98502
wixroyd.com
Material
Handle: hickory
Order No. For l1
Xg
98502.W0203 MaxxCraft 300 265 100
98502.W0205 MaxxCraft 500 280 120
98502.W0208 MaxxCraft 800 305 170
98502.W0210 MaxxCraft 1000 310 180