Soft Face Mallets and Hammers - Hillcliff · PDF filea division of Wixroyd 797 HAND TOOLS...

Hexagon Keys (Long)in clip set, blackened or nickel plated - DIN 911L

90180

wixroyd.com

Material

Keys: chrome vanadium, hardened.

Blackened or nickel plated.

Clip: plastic polyamide, red.

Technical Notes

Parts to DIN 911 LC/LD and ISO

2936 LC/LD.

Tips

Other sizes and sets available on

request. For a/f of hex. keys and

screw sizes please refer to Appendix

8.

Order No. Finish Pieces

Contents

a/f

mm/inch

Xg

90180.W0007 Nickel Plated 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 415

90180.W0009 Blackened 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 415

90180.W0908 Nickel Plated 9 5/64, 3/32, 1/8, 5/32,

3/16, 7/32, 1/4, 5/32

395

Hexagon Keys (Metric, Long)in plastic box, nickel plated - DIN 911L

90210

wixroyd.com

Material


Nickel plated.

Box: impact resistant plastic.

Technical Notes

Parts to DIN 911 LD and ISO 2936

LD.

Tips

Other set combinations available on

request. For a/f of hex. keys and

screw sizes please refer to Appendix

8.


Contents

a/f

mm

l x w x h Xg

90210.W0008 Nickel Plated 8 2, 2.5, 3, 4, 5, 6, 8, 10 265x88x17 535

Hexagon Keys, T-Handlednickel plated

90300

wixroyd.com

Material

Blade: chrome vanadium, hardened.

Nickel plated.

Handle: resistant plastic (cadmium

free), with black plastic grip.

Technical Notes

Items marked with an * stamped

with both metric and imperial sizes.

Grip shape optimised for

comfortable use.

Features hang-up hole for a tidy

workplace.

Tips

Other sizes and blade lengths

available on request. Please request

quotation for your company logo to

be printed on handle. For a/f of hex.

keys and screw sizes please refer to

Appendix 8.

Order No. Finisha/f

mm

a/f

inchesl1

l2

b Xg

90300.W0020 Nickel Plated 2,0 5/64 100 125 80 18

90300.W0025 Nickel Plated 2,5 - 100 125 80 24

90300.W0026 Nickel Plated 2,5 - 200 225 80 30

90300.W0030 Nickel Plated 3,0 - 100 125 80 24

90300.W0031 Nickel Plated 3,0 - 150 175 80 30

90300.W0032 Nickel Plated 3,0 - 200 225 80 40

90300.W0040 Nickel Plated 4,0 5/32 100 125 80 31

90300.W0041 Nickel Plated 4,0 5/32 150 175 80 36

90300.W0042 Nickel Plated 4,0 5/32 200 225 80 41

90300.W0043 Nickel Plated 4,0 5/32 300 325 80 50

90300.W0050 Nickel Plated 5,0 - 100 131 100 51

90300.W0051 Nickel Plated 5,0 - 150 181 100 60

90300.W0052 Nickel Plated 5,0 - 200 231 100 68

90300.W0053 Nickel Plated 5,0 - 350 381 100 100

90300.W0060 Nickel Plated 6,0 - 100 131 100 58

90300.W0061 Nickel Plated 6,0 - 150 181 100 77

90300.W0062 Nickel Plated 6,0 - 200 231 100 84

90300.W0063 Nickel Plated 6,0 - 350 381 100 130

90300.W0080 Nickel Plated 8,0 5/16 100 131 100 85

90300.W0081 Nickel Plated 8,0 5/16 150 181 100 105

90300.W0082 Nickel Plated 8,0 5/16 200 231 100 125

90300.W0083 Nickel Plated 8,0 5/16 350 381 100 200

90300.W0100 Nickel Plated 10,0 - 100 138 100 165

90300.W0102 Nickel Plated 10,0 - 350 338 100 350

Hexagon Keys, T-Handledwith screw retaining ring, on workstand

90310

wixroyd.com

Material


Nickel plated.

Handle: shock resistant red plastic

(cadmium free), with black plastic

grip.

Stand: single-grade, shock resistant

plastic (cadium free).

Technical Notes

For a/f of hex. keys and screw sizes

please refer to Appendix 8.

Tips

Stand features clips for connecting

additional workshop stands.

Order No. Finish Piecesa/f

2 x L

a/f

2,5 x L

a/f

3 x L

a/f

4 x L

a/f

5 x L

a/f

6 x L

a/f

8 x LX

g

90310.W0022 Nickel Plated 7 100 100 150 150 150 200 200 650

Hexagon Keys (Metric)with pilot pin, in plastic box

90490

wixroyd.com

Material

Chrome vanadium, hardened. Nickel

plated.

Box: shock resistant plastic.

Technical Notes

Used with socket head cap screws

DIN 6912, these hexagon keys, with

pilot pin provide added security to

components in a variety of

applications. Sizes 2 and 2,5 mm

are standard hex. keys.

Tips

Other sizes available on request.


Contents

a/f

mm

Xg

90490.W0007 Nickel Plated 7 2, 2.5, 3, 4, 5, 6, 8 175

Hex. Keys, Ball Ended, Straight Handlenickel plated

90510

wixroyd.com

Material


Nickel plated.



grip.

Tips



Order No. Finisha/f

mml1

l2

w Xg

90510.W0002 Nickel Plated 2,5 100 190 19 35

90510.W0003 Nickel Plated 3,0 100 190 19 35

90510.W0004 Nickel Plated 4,0 100 200 21 50

90510.W0005 Nickel Plated 5,0 100 200 21 75

Hex. Keys, Ball Ended, T-Handlednickel plated

90520

wixroyd.com

Material


Nickel plated.



grip.

Tips



Order No.a/f

mml1

l2

b Xg

90520.W0004 4 150 175 80 40

90520.W0005 5 150 181 100 65

90520.W0006 6 150 181 100 80

90520.W0008 8 200 231 100 130

Hexagon Keys, Ball Ended (Metric, Long)in clip set, blackened or Nickel plated

90530

wixroyd.com

Material


Blackened or chrome plated.

Clip: plastic polyamide.

Tips




Contents

a/f

mm

Xg

90530.W0009 Blackened 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 440

90530.W0109 Nickel Plated 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 440

Torx Keys, T-Handledchrome plated

90620

wixroyd.com

Material


Handle: shock resistant green

plastic (cadmium free).

Technical Notes

Torx is a registered trademark of

Camcar/Textron Inc.

Tips

Other sizes and lengths available on

request. Please request quotation

for your company logo to be printed

on handle.

Order No. FinishTorx

sizea l

1l2

b Xg

90620.W0009 Chrome Plated T 9 2,50 100 125 80 35

90620.W0010 Chrome Plated T10 2,74 100 125 80 35

90620.W0015 Chrome Plated T15 3,27 100 125 80 36

90620.W0020 Chrome Plated T20 3,86 100 125 100 60

90620.W0025 Chrome Plated T25 4,43 100 125 100 60

90620.W0027 Chrome Plated T27 4,99 100 131 100 70

90620.W0030 Chrome Plated T30 5,52 100 131 100 75

90620.W0040 Chrome Plated T40 6,65 100 131 100 80

90620.W0050 Chrome Plated T50 8,83 150 188 120 160

Torx Keys, T-Handledon workshop stand, chrome plated

90630

wixroyd.com

Material


Chrome plated, with black tip.



Workstand: shock resistant red

plastic.

Technical Notes

With T-Handled Torx Keys part

number 90620.

Tips

Stand features clips for connecting

additional workshop stands.

Order No.Torx

T10 x l1

Torx

T15 x l1

Torx

T20 x l1

Torx

T25 x l1

Torx

T30 x l1

Torx

T40 x l1

Torx

T50 x l1

Xg

90630.W0001 100 100 100 100 100 100 150 660

Torx Keys, Ball-endedin clip set, 8 piece set

90640

wixroyd.com

Material

Keys: chrome vanadium, hardened,

steel grey.

Clip: plastic polyamide, green.

Order No. Finish PiecesContents

a/fX

g

90640.W0008 Chrome Vanadium 8 T9, T10, T15, T20, T25, T27, T30, T40 165

Torx Keys, Straight Handledblackened

90650

wixroyd.com

Material


Blackened. Chrome plated.


plastic (cadmium free), with black

plastic grip.

Tips

Other sizes available on request. For

a/f of hex. Keys and screw sizes


Order No. Finish Torx a l1

l2

Xg

90650.W0008 Blackened T 8 2,31 60 140 37

90650.W0009 Blackened T 9 2,50 60 140 37

90650.W0010 Blackened T10 2,74 80 160 39

90650.W0015 Blackened T15 3,27 80 170 41

90650.W0020 Blackened T20 3,86 100 190 56

90650.W0025 Blackened T25 4,43 100 200 60

Torx Keys, Flag Typeblackened

90670

wixroyd.com

Material


Blackened.



Tips



Order No. Finish Torx a b l1

l2

Xg

90670.W0006 Blackened T 6 1,70 38 35 70 14

90670.W0007 Blackened T 7 1,99 38 35 70 14

90670.W0008 Blackened T 8 2,31 38 40 75 14

90670.W0009 Blackened T 9 2,50 38 40 75 15

90670.W0010 Blackened T10 2,74 38 40 75 15

Torx Keys, Mini Grip Typeblackened

90680

wixroyd.com

Material


Blackened.



Tips



Order No. Finish Torx a l1

l2

b Xg

90680.W0005 Blackened T 5 1,42 35 69 22 3,5

90680.W0006 Blackened T 6 1,70 35 69 22 3,6

90680.W0007 Blackened T 7 1,99 35 69 22 3,7

90680.W0008 Blackened T 8 2,31 40 74 22 5,8

90680.W0009 Blackened T 9 2,50 40 74 22 6,3

90680.W0010 Blackened T10 2,74 40 74 22 6,8

90680.W0015 Blackened T15 3,27 45 79 22 7,5

90680.W0020 Blackened T20 3,86 45 79 22 8,0

60° and 90° 60°, 82°, 90°

and 120° • Concentric chamfers.

• Excellent surface finish.

• Reduces risk of cutting into the work piece.

• Controlled machining torque.

1 When the chamfer tool’s spindle

is lowered, it’s pilot cone firstly

centres the workpiece then

retracts to allow the blade to

come into contact with the

material and start cutting of the

chamfer.

2 Adjusting the output of the blade

controls the thickness of the

chip count NOT the value or

angle of the chamfer e.g. with

a blade output of 0,4mm the

chamfering tool requires 10

revolutions to cut 1mm of the

chamfer.

3 Concentric chamfer achieved.

Chamfering tools consist

of three main elements.

Attachment spindle, pilot cone,

cutting blade.

A variety of spindle

attachments are available

from CM1, CM2 and CM3.

Our chamfer tools act in a

similar fashion to a carpenter’s

plane.

external chamfers

internal chamfers

Wixroyd chamfering tools, which are mainly used on drills, create high quality consistent inner or outer chamfers between 60° to 120° inclusive angle, on a wide range of metals.

Construction

wixroyd.com

Chamfering Tools

Recommendedcutting speed

Typical rpm for varying

chamfer diameters,

when using cutting speed of

between 10 and 20 m/min.

We do however recommend you use the following formula to check the most suitable rpm used.

Rpm = (cutting speed x 1000) / (diameter x 3.14)

We recommend a cutting speed of between 10 and 20m/min. Hence typical value for chamfers of varying diameter are as follows.

Important Note: We recommend chamfering tool is lubricated with cutting fluid or soluble oil to

ensure long life of cutting blade edge, and to reduce wear of the pilot cone.

We offer blades with a variety of cutting angles to best suit the material in which a chamfer

is required.

Typically a bald cutting angle of 14° suits most applications, please refer to table below.

Diameter RPM range

10Ø mm 320 to 640 rpm

15Ø mm 210 to 420 rpm

20Ø mm 160 to 320 rpm

30Ø mm 110 to 220 rpm

40Ø mm 80 to 160 rpm

50Ø mm 55 to 110 rpm

Blade cutting angle 0° 14° 20° 25°

Suitable for material

Brass, bronze,

cast iron,

stainless steel

Steel,

special bronze,

perspex

Soft steel, copper,

AU 4G, plastic,

stainless steel

Aluminium,

soft iron,

sheet metal

0845 26 66 577 [email protected]

Chamfering Tools

Inner Chamfering Toolsfor drill attachment

91000

wixroyd.com

Technical Notes

Consists of four main elements;

1. Body and drill attachment

spindle.

2. Pilot cone - unique to the desired

chamfer, provides full support

during cutting and ensures

concentric chamfer.

3. Blades - 1 x HSS blade at 14

cutting angle supplied.

4. Blade adjustment lock nut.

Tips

Achieve high quality concentric

chamfering quickly and easily,

without risk of damage/cutting into

workpiece.

Recommended cutting speed; 10 to

20 m/min. For hand drill chamfering

tool we recommend a cutting speed

of 3 - 40 rpm.

Available with attachment spindles

to suit most pillar drills, CNCs or

hand drills.

Chamfer angle quoted is "inclusive

angle".

Important Notes

To extend life of blade and pilot

cone we recommend lubrication

with cutting fluid or soluble oil.

On initial set-up make minor height

adjustment of pilot cone via blade

adjustment lock nut, to ensure best

possible positioning.

Referral

For replacement or alternative

blades to suit different material

types, see part no. 91002.

Also available in 82 and 120

inclusive chamfer angle models,

subject to minimum qty.

Order No.Chamfer dia.

min. - max.

Inc. chamfer

angle

Attachment

spindled

1d

2l1

91000.W1860-

1

2-17 60 18 26 64

91000.W1890-

1

2-17 90 18 26 55

91000.W4260-

1

3-41 60 42 65 108

91000.W4290-

1

3-41 90 42 65 85

91000.W4260-

2

3-41 60 CM2 42 65 108

91000.W4290-

2

3-41 90 CM2 42 65 85

91000.W6060-

2

21-59 60 CM2 60 70 106

91000.W6090-

2

21-59 90 CM2 60 70 94

91000.W8060-

2

40-77 60 CM2 80 90 114

91000.W8090-

2

40-77 90 CM2 80 90 100

Inner Chamfering Toolsfor drill attachment

91000

wixroyd.com

Technical Notes



spindle.




concentric chamfer.



4. Blade adjustment lock nut.

Tips

Achieve high quality concentric



workpiece.


20 m/min. For hand drill chamfering

tool we recommend a cutting speed

of 3 - 40 rpm.



hand drills.


angle".

Important Notes








Referral

For replacement or alternative

blades to suit different material

types, see part no. 91002.

Also available in 82 and 120

inclusive chamfer angle models,

subject to minimum qty.

Blades for Inner Chamfering Toolsfor use with 91000

91002

wixroyd.com

Material

High speed steel.

Technical Notes

Blade with a 14 cutting angle is

most commonly used as it covers

the widest range of standard

materials, please see material

suitability table below.

Important Notes


20m/min.




Order No. MaterialFor chamfer dia.

min. - max.

Inc. chamfer

angle

Cutting

angle

a

No. of

cutting

edges

w1

l1

91002.W1860-

00

HSS 2-17 60 0 1 8,7 38,5

91002.W1860-

14

HSS 2-17 60 14 1 8,7 38,5

91002.W1860-

20

HSS 2-17 60 20 1 8,7 38,5

91002.W1860-

25

HSS 2-17 60 25 1 8,7 38,5

91002.W4260-

00

HSS 3-41 60 0 2 20,0 90,0

91002.W4260-

14

HSS 3-41 60 14 2 20,0 90,0

91002.W4260-

20

HSS 3-41 60 20 2 20,0 90,0

91002.W4260-

25

HSS 3-41 60 25 2 20,0 90,0

91002.W6060-

00

HSS 21-59/40-77 60 0 2 20,0 90,0

91002.W6060-

14

HSS 21-59/40-77 60 14 2 20,0 90,0

91002.W6060-

20

HSS 21-59/40-77 60 20 2 20,0 90,0

91002.W6060-

25

HSS 21-59/40-77 60 25 2 20,0 90,0

91002.W1890-

00

HSS 2-17 90 0 1 8,7 30,0

91002.W1890-

14

HSS 2-17 90 14 1 8,7 30,0

91002.W1890-

20

HSS 2-17 90 20 1 8,7 30,0

91002.W1890-

25

HSS 2-17 90 25 1 8,7 30,0

91002.W4290-

00

HSS 3-41 90 0 2 20,0 73,0

91002.W4290-

14

HSS 3-41 90 14 2 20,0 73,0

Blades for Inner Chamfering Toolsfor use with 91000

91002

wixroyd.com

Material

High speed steel.

Technical Notes






Important Notes


20m/min.




Order No. MaterialFor chamfer dia.

min. - max.

Inc. chamfer

angle

Cutting

angle

a

No. of

cutting

edges

w1

l1

91002.W4290-

20

HSS 3-41 90 20 2 20,0 73,0

91002.W4290-

25

HSS 3-41 90 25 2 20,0 73,0

91002.W6090-

00

HSS 21-59/40-77 90 0 2 20,0 73,0

91002.W6090-

14

HSS 21-59/40-77 90 14 2 20,0 73,0

91002.W6090-

20

HSS 21-59/40-77 90 20 2 20,0 73,0

91002.W6090-

25

HSS 21-59/40-77 90 25 2 20,0 73,0

91002.W4282-

00

HSS 3-41 82 0 2 20,0 73,0

91002.W4282-

14

HSS 3-41 82 14 2 20,0 73,0

91002.W4282-

20

HSS 3-41 82 20 2 20,0 73,0

91002.W4282-

25

HSS 3-41 82 25 2 20,0 73,0

91002.W8120-

00

HSS 2-17 120 0 1 20,0 73,0

91002.W8120-

14

HSS 2-17 120 14 1 20,0 73,0

91002.W8120-

20

HSS 2-17 120 20 1 20,0 73,0

91002.W8120-

25

HSS 2-17 120 25 1 20,0 73,0

91002.W4242-

00

HSS 3-41 120 0 2 20,0 60,0

91002.W4242-

14

HSS 3-41 120 14 2 20,0 60,0

91002.W4242-

20

HSS 3-41 120 20 2 20,0 60,0

91002.W4242-

25

HSS 3-41 120 25 2 20,0 60,0

Outer Chamfering Toolsfor drill attachment

91020

wixroyd.com

Technical Notes



spindle.




concentric chamfer.



4. Blades adj. lock nut.


20 m/min.

Acheive high quality concentric



the work piece. Specially designed

pilot cone provides full support of

blade throughout cutting and

ensures concentric chamfer.



hand drills.


angle".

To ensure a longer life to the cutting

edge of the blades and to prevent

damage to the pilot cone we firmly

recommend lubricating with cutting

compound or soluble oil.

Important Notes


20 m/min.








Referral

For replacement blades see part no.

91022.

Order No.Chamfer dia.

min. - max.

Inc. chamfer

angle

Attachment

spindled

1d

2l1

91020.W1860-

1

2-17 60 18 26 54

91020.W1890-

1

2-17 90 18 26 54

91020.W3660-

1

4-37 60 42 65 105

91020.W3690-

1

4-37 90 42 65 85

91020.W3660-

2

4-37 60 CM2 42 65 105

91020.W3690-

2

4-37 90 CM2 42 65 85

91020.W4660-

2

9-45 60 CM2 48 65 109

91020.W4690-

2

9-45 90 CM2 48 65 85

91020.W6060-

2

21-57 60 CM2 60 70 109

91020.W6090-

2

21-57 90 CM2 60 70 85

91020.W8060-

2

40-77 60 CM2 80 90 118

91020.W8090-

2

40-77 90 CM2 80 90 95

Outer Chamfering Toolsfor drill attachment

91020

wixroyd.com

Technical Notes



spindle.




concentric chamfer.



4. Blades adj. lock nut.


20 m/min.

Acheive high quality concentric



the work piece. Specially designed

pilot cone provides full support of

blade throughout cutting and

ensures concentric chamfer.



hand drills.


angle".






Important Notes


20 m/min.








Referral

For replacement blades see part no.

91022.

Blades for Outer Chamfering Toolsfor use with 91020

91022

wixroyd.com

Material

High speed steel.

Technical Notes











Tips


20 m/min.

Order No. MaterialChamfer dia.

min. - max.

Inc.

chamfer

angle

Cutting

angle

a

No. of

cutting

edges

w1

l1

91022.W1860-

00

HSS 2-17 60 0 1 8,7 30

91022.W1860-

14

HSS 2-17 60 14 1 8,7 30

91022.W1860-

20

HSS 2-17 60 20 1 8,7 30

91022.W1860-

25

HSS 2-17 60 25 1 8,7 30

91022.W3660-

00

HSS 4-37/9-45/21-57/40-77 60 0 2 20,0 88

91022.W3660-

14

HSS 4-37/9-45/21-57/40-77 60 14 2 20,0 88

91022.W3660-

20

HSS 4-37/9-45/21-57/40-77 60 20 2 20,0 88

91022.W3660-

25

HSS 4-37/9-45/21-57/40-77 60 25 2 20,0 88

91022.W1890-

00

HSS 2-17 90 0 1 8,7 30

91022.W1890-

14

HSS 2-17 90 14 1 8,7 30

91022.W1890-

20

HSS 2-17 90 20 1 8,7 30

91022.W1890-

25

HSS 2-17 90 25 1 8,7 30

91022.W3690-

00

HSS 4-37/9-45/21-57/40-77 90 0 2 20,0 69

91022.W3690-

14

HSS 4-37/9-45/21-57/40-77 90 14 2 20,0 69

91022.W3690-

20

HSS 4-37/9-45/21-57/40-77 90 20 2 20,0 69

91022.W3690-

25

HSS 4-37/9-45/21-57/40-77 90 25 2 20,0 69

Collet Wrenches 91080

wixroyd.com

Material

Steel head and fins.

Technical Notes

Simplifies insertion and removal of

collets in the spindle nose on CNC

lathes.

Important Notes

All dimensions in imperial.

Order No.Collet

sizeFins l

1d

1l2

l3

w1

d2

91080.W0005 5C 3 4,25 1,25 0,5 0,25 0,28 1,13

91080.W0010 16C 3 4,25 1,75 0,5 0,25 0,50 1,13

91080.W0015 3J 4 4,25 1,75 0,5 0,25 0,50 1,13

Collet Stops 91082

wixroyd.com

Material

Collet stop for 5C.

Technical Notes

This front loading collet stop is

extremely easy to use.

Once seated the collet need not be

removed for adjustment.

Self-centering and reusable.

Order No. l1

91082.W0020 610

T-Wrench, Triangularfemale - DIN 22417A

91990

wixroyd.com

Material

Steel, zinc plated.

Technical Notes

For use with triangular screw to DIN

22424, and triangular nuts to DIN

22425.

Order No. Screw thread l1

d1

a1

w2

d2

s1

Xg

91990.W0004 M 4 90 10 7,7 50 6 6,80 20

91990.W0005 M 5 100 12 9,4 65 6 8,30 30

91990.W0006 M 6 115 14 11,4 80 6 10,05 60

91990.W0008 M 8 125 16 13,7 100 6 12,05 80

91990.W0010 M10 140 20 17,1 125 8 15,05 160

91990.W0012 M12 160 22 18,9 160 10 16,55 240

91990.W0016 M16 180 25 23,5 200 12 20,55 400

T-Wrench, Square Drive (Standard)female - DIN 904

92000

wixroyd.com

Material

Steel C35/C45.

Body and socket: hardened and

brown finish tempered.

Technical Notes

( ) not to DIN Standard. Items

marked *, body not recessed as

required by DIN standard.

Order No. a/f d1

d2

l1

l2

l4

Xg

92000.W0004 4 12,0 6,0 60 160 11 85

92000.W0005 5 12,0 6,0 60 160 11 85

92000.W0006 6 12,0 6,0 80 160 12 100

92000.W0007 7 14,6 6,0 80 160 15 180

92000.W0008 8 16,0 9,0 80 180 15 180

92000.W0009 9 18,0 9,0 100 180 18 245

92000.W0010 10 20,0 11,0 100 200 18 340

92000.W0012 12 24,0 12,0 100 250 21 520

92000.W0013 13 24,0 12,0 100 250 22 520

92000.W0014 14 28,0 14,6 120 320 24 875

92000.W0017 17 34,0 16,0 160 400 28 1625

92000.W0019 19 36,0 16,0 200 400 30 2035

92000.W0022 22 42,0 18,0 200 500 34 2900

92000.W0024 24* 45,0 20,0 250 630 36 4270

T-Wrench, Square Drive (Long)female - DIN 904L

92010

wixroyd.com

Material

Steel C35/C45.

Body and socket: hardened brown

finish tempered.

Technical Notes

( ) not to DIN standard. Items

marked *, body not recessed as

required by DIN standard.

Order No. a/f d1

d2

l1

l2

l4

Xg

92010.W0005 5 12 6,0 120 160 11 100

92010.W0006 6 12 6,0 160 160 12 110

92010.W0008 8 16 9,0 160 180 15 210

92010.W0009 9 18 9,0 200 200 18 390

92010.W0010 10 20 11,0 200 200 18 390

92010.W0012 12 24 12,0 200 250 21 600

92010.W0013 13 24 12,0 200 250 22 600

92010.W0014 14 28 14,6 200 320 24 795

92010.W0017 17* 34 16,0 250 400 28 1500

92010.W0019 19* 36 16,0 320 400 30 1700

T-Wrench, Square Socketmale - DIN 905

92050

wixroyd.com

Material

Steel C35/C45.



Technical Notes

( ) not to DIN standard.

Order No. a/f d1

d2

d3

l1

l2

l3

l4

Xg

92050.W0004 (4) 12,0 6,0 6 60 160 20 9 70

92050.W0005 5 12,0 6,0 8 60 160 20 11 70

92050.W0006 6 12,0 6,0 10 80 160 22 12 80

92050.W0007 (7) 14,6 6,0 12 80 160 26 15 115

92050.W0008 8 16,0 9,0 14 80 180 26 15 180

92050.W0009 9 16,0 9,0 14 80 180 26 17 180

92050.W0010 10 20,0 11,0 18 100 200 30 18 320

92050.W0011 11 20,0 11,0 18 100 200 30 20 320

92050.W0012 12 24,0 12,0 20 100 250 38 21 450

92050.W0013 13 24,0 12,0 20 100 250 38 22 450

92050.W0014 14 28,0 14,6 22 120 320 38 24 780

92050.W0017 17 34,0 16,0 25 160 400 50 28 1500

92050.W0019 19 36,0 16,0 28 200 400 50 30 1850

92050.W0022 22 42,0 20,0 32 200 630 65 34 3100

Square Socket Wrenchfemale - DIN 248

92060

wixroyd.com

Material

Steel C35/C45.



Order No. Finish a/f d1

h1

l1

Xg

92060.W0008 Brown 8 17 22,0 160 85

92060.W0010 Brown 10 21 22,5 195 165

92060.W0012 Brown 12 24 26,5 235 275

92060.W0013 Brown 13 26 27,5 250 300

92060.W0014 Brown 14 27 30,5 270 420

92060.W0017 Brown 17 31 37,0 315 530

92060.W0019 Brown 19 35 41,0 345 715

92060.W0022 Brown 22 39 46,0 385 900

92060.W0024 Brown 24 43 49,0 415 975

Square Wrench, T-Handledfemale, nickel plated

92070

wixroyd.com

Material


Nickel plated.

Handle: shock resistant black plastic

(cadmium free).

Order No. a/f l1

l2

b d Xg

92070.W0008 8 125 151 100 14 122

92070.W0010 10 125 151 100 17 150

Spanner For Shell and Mill Arbors - DIN 6368for cutter retaining screws DIN 6367

92100

wixroyd.com

Material

Steel C35/C45.



Technical Notes

* Nominal size refers to diameter of

mandrel on milling arbor.

Order No. SizeFor nut to

DIN 6367b

1d

1h

1l1

Xg

92100.W0013 13 M 6 6,1 18 16 160 75

92100.W0016 16 M 8 8,1 22 20 180 110

92100.W0022 22 M10 10,1 28 25 200 200

92100.W0027 27 M12 12,1 35 32 225 400

92100.W0032 32 M16 16,1 42 36 250 570

92100.W0040 40 M20 20,2 52 40 280 800

92100.W0050 50 M24 24,2 63 45 315 1100

92100.W0060 60 M30 28,2 76 50 355 1750

Collet Spannersfor nuts to DIN 6499

92120

wixroyd.com

Material

Steel C35/C45, hardened and zinc

plated.

Technical Notes

For use on clamping nuts to DIN

6499.

Order No. SizeFor nut to

DIN 6499Dd

1l1

b1

Xg

92120.W0016 16 16 32 163 4 180

92120.W0020 20 20 35 183 5 190

92120.W0025 25 25 42 203 6 255

92120.W0032 32 32 50 253 6 359

92120.W0040 40 40 63 285 6 550

92120.W0050 50 - 78 350 7 580

Drill Drifts - DIN 317for machine tapers DIN 228

92200

wixroyd.com

Material

Steel C35/C45, hardened and brown

finish tempered.

Order No. Size Morse taper Metric taper l1

b1

w1

Xg

92200.W0000 0 0 4 & 6 90 12 3 14

92200.W0001 1 1 & 2 - 140 20 5 70

92200.W0003 3 3 - 190 25 7 150

92200.W0004 4 4 - 225 30 10 310

92200.W0005 5 5 & 6 - 265 35 15 650

Drill Driftssemi-automatic

92220

wixroyd.com

Material

Steel C35/C45, hardened.

Blackened.

Tips

This semi-automatic drill-drift

simplifies the removal of machine

tapers (to DIN 228).

Order No. Size Morse taper l1

Xg

92220.W0003 1-3 1-3 330 370

92220.W0006 4-6 4-6 380 530

Adjustable Pin Face Spannerswith welded pins

94000

wixroyd.com

Material

Steel C35/C45, blue finish

tempered.

Technical Notes

X is preferred size, with improved

stack holding.

Size 7-40 width riveted pins, from

size 11-60 with pins electrically

welded.

Order No.

d1

For nut dia.

min. - max.

d2

-0,1

h12

l2

l1

b1

Xg

94000.W0041 7-40 1,5 2,0 115 3 40

94000.W0042 7-40 2,0 x 2,5 115 3 40

94000.W0043 7-40 2,5 3,0 115 3 40

94000.W0061 11-60 3,0 4,0 160 4 140

94000.W0062 11-60 4,0 x 5,0 160 4 140

94000.W0063 11-60 5,0 6,0 160 4 140

94000.W0101 14-100 5,0 6,0 215 6 300

94000.W0102 14-100 6,0 x 7,0 215 6 300

94000.W0103 14-100 8,0 8,0 215 6 300

94000.W0125 22-125 8,0 x 8,0 260 6 500

94000.W0126 22-125 10,0 10,0 260 6 500

94000.W0127 22-125 12,0 12,0 260 6 500

Hook Spanners, With Hook Nose - Traditionalhinge type

95100

wixroyd.com

Material

Steel C35/C45, edgewise ground,

hardened, blackened.

Stainless steel type from rust free

stainless steel.

Technical Notes

Spanners for adjustment of nuts to

DIN 1804, DIN 981 and DIN 11851.

Order No. Finish

d1

Nut dia.

min. - max.

Thread

size of nut

DIN 1804 M

Thread

size of nut

DIN 981

M

DIN

11851-F DNl1

b1

b2

Xg

95100.W0035 Blackened 20-35 8-18 1-4 - 135 3 8 40

95100.W0060 Blackened 35-60 20-38 5-8 - 175 4 11 85

95100.W0090 Blackened 60-90 40-60 9-13 - 240 6 13 250

95100.W0155 Blackened 90-155 58-110 14-24 - 300 7 15 425

95100.W0230 Blackened 155-230 105-170 24-36 - 420 8 18 1015

95100.W0901 Stainless Steel 20-35 8-18 1-4 - 135 3 8 35

95100.W0902 Stainless Steel 35-60 20-38 5-8 10-20 175 4 11 75




Hook Spanners, With Hook Nose - Longhinge type

95110

wixroyd.com

Material


hardened. Blackened or zinc plated.

Stainless steel type from rust free

stainless steel.

Technical Notes

Spanners for adjustment of nuts to

DIN 1804, DIN 981 and DIN 11851.

Extended hook and shank,

strengthened rivet, spring water.

Rounded edges for better handling.

Order No. Finish

d1

Nut dia.

min.- max.

Thread

size of nut

DIN 1804 M

Thread

size of nut

DIN 981

M

DIN

11851-F DNl1

b1

b2

Xg

95110.W0035 Blackened 20-35 8-18 1-4 - 165 4 10,5 85

95110.W0060 Blackened 35-60 20-38 5-8 - 210 5 12,5 170

95110.W0090 Blackened 60-90 40-60 9-13 - 280 6 14,5 360

95110.W0155 Blackened 90-155 58-110 14-24 - 335 7 17,5 610

95110.W0230 Blackened 155-230 105-170 24-36 - 460 8 17,5 1200

95110.W0535 Nickel Plated 20-35 8-18 1-4 - 165 4 10,5 85

95110.W0560 Nickel Plated 35-60 20-38 5-8 - 210 5 12,5 170

95110.W0590 Nickel Plated 60-90 40-60 9-13 - 280 6 14,5 360

95110.W0655 Nickel Plated 90-155 58-110 14-24 - 335 7 17,5 610

95110.W0730 Nickel Plated 155-230 105-170 24-36 - 460 8 17,5 1200

95110.W0901 Stainless Steel 20-35 8-18 1-4 - 165 4 10,5 85

95110.W0902 Stainless Steel 35-60 20-38 5-8 10-20 210 5 12,5 170




Hook Spanners, With Pin Nose - Traditionalhinge type

95151

wixroyd.com

Material


hardened and brown finish

tempered.

Technical Notes

For round nuts with set pin holes

inside to DIN 1816.


stock holding.

Order No. Finish

d1

Nut dia.

min. - max.

d2

l1

b1

b2

Xg

95151.W0035 Blackened 20-35 2,5 x 135 3 8 40

95151.W0036 Blackened 20-35 3,0 135 3 8 40

95151.W0037 Blackened 20-35 4,0 135 3 8 40

95151.W0060 Blackened 35-60 4,0 x 175 4 11 85

95151.W0061 Blackened 35-60 5,0 175 4 11 85

95151.W0090 Blackened 60-90 5,0 x 245 6 13 250

95151.W0091 Blackened 60-90 6,0 245 6 13 250

95151.W0155 Blackened 90-155 6,0 x 300 7 15 425

95151.W0156 Blackened 90-155 8,0 300 7 15 425

95151.W0230 Blackened 155-230 8,0 420 8 18 1015

Hook Spanners, With Pin Nose - Long Versionhinge type

95152

wixroyd.com

Material


hardened and blue finish tempered.

Technical Notes

For round nuts with set pin holes

inside to DIN 1816.

'x' is preferred size, with improved

stock holding.

Rounded edges for better handling.

Sizes 16 - 22 without retaining ring.

Tips

Longer shaft permits higher torque.

Order No. Finish

d1

Nut dia.

min. - max.

d2

l1

b1

b2

Xg

95152.W0122 Blackened 16-22 2,5 135 3 7,5 50

95152.W0135 Blackened 22-35 3,0 165 4 10,5 85

95152.W0160 Blackened 35-60 4,0 205 5 12,5 170

95152.W0190 Blackened 60-90 5,0 x 280 6 14,5 380

95152.W0191 Blackened 60-90 6,0 280 6 14,5 380

95152.W0255 Blackened 95-155 6,0 x 335 7 17,5 610

95152.W0256 Blackened 95-155 8,0 335 7 17,5 610

95152.W0330 Blackened 165-230 8,0 460 8 17,5 1200

95152.W0331 Blackened 165-230 10,0 x 460 8 17,5 1200

95152.W0622 Nickel Plated 16-22 2,5 135 3 7,5 50

95152.W0635 Nickel Plated 22-35 3,0 165 4 10,5 85

95152.W0660 Nickel Plated 35-60 4,0 205 5 12,5 170

95152.W0690 Nickel Plated 60-90 6,0 280 6 14,5 380

95152.W0755 Nickel Plated 95-155 6,0 335 7 17,5 610

95152.W0830 Nickel Plated 165-230 10,0 460 8 17,5 1200

Face Spanners, With Pinsfixed - DIN 3116A

95340

wixroyd.com

Material


tempered.

Technical Notes

Pins spot welded.

Tips

( ) not to DIN Standard.

** Standard size for typical angle

grinders.

Order No.d

1For nut dia.

d2

-0,1

h12

l2

l1

b1

Xg

95340.W0013 13 2,5 3,0 90 3 27

95340.W0015 15 3,0 4,0 90 3 27

95340.W0020 20 (3,0) 4,0 122 4 50

95340.W0021 20 4,0 5,0 122 4 50

95340.W0025 25 3,0 4,0 137 4 65

95340.W0026 25 4,0 5,0 137 4 65

95340.W0030 30 4,0 5,0 164 5 105

95340.W0035 35 5,0 6,0 180 5 130

95340.W0036 35 (4,0) 5,0 180 5 120

95340.W0040 40 4,0 5,0 167 5 120

95340.W0045 45 4,0 5,0 187 5 145

95340.W0050 50 5,0 6,0 198 5 175

95340.W0060 60 5,0 6,0 213 6 220

95340.W0075 75 6,0 7,0 243 6 330

95340.W0090 90 7,0 7,5 270 8 410

Face Spanners, With Pinsadjustable

95350

wixroyd.com

Material


tempered.

Technical Notes

Fixed pin spot welded. For

replacement pins see part no.

95360.

Tips


stock holding.

Order No. Type

d1

Nut dia.

min. - max.

d2

-0,1

h12

l2

l1

b1

Xg

95350.W0041 Fixed Pin 18-40 3,0x 4,0 150 5 100

95350.W0042 Fixed Pin 18-40 4,0 5,0 150 5 100

95350.W0081 Fixed Pin 40-80 4,0x 5,0 220 6 265

95350.W0082 Fixed Pin 40-80 5,0 6,0 220 6 265

95350.W0083 Fixed Pin 40-80 6,0 7,0 220 6 265

95350.W0125 Fixed Pin 80-125 6,0x 7,0 295 8 650

95350.W0126 Fixed Pin 80-125 7,0 7,5 295 8 650

95350.W0127 Fixed Pin 80-125 8,0 8,0 295 8 650

95350.W0201 Fixed Pin 125-200 8,0x 8,0 405 10 1590

95350.W0202 Fixed Pin 125-200 10,0 10,0 405 10 1590

95350.W0541 Replaceable Pin 18-40 3,0 4,0 150 5 100










Replacement Pinsfor face spanners 95350

95360

wixroyd.com

Material

Steel C35/C45, hardened and blue

finish tempered.

Order No.

d2

Pin dia.

-0,1

h12

d1

l mFor use with 95350 with

d1

nut dia. ofX

g

95360.W0002 3 5,5 4,0 M 4 18-40 2

95360.W0003 4 7,0 5,0 M 4 18-40 2

95360.W0007 4 7,0 4,5 M 5 40-80 3

95360.W0008 5 8,5 5,5 M 5 40-80 4

95360.W0009 6 10,0 6,5 M 6 40-80 5

95360.W0010 4 8,5 4,5 M 6 40-80/80-125 3

95360.W0011 5 8,5 5,5 M 6 40-80/80-125 5

95360.W0012 6 10,0 6,5 M 6 40-80/80-125 7

95360.W0013 7 11,0 7,0 M 6 40-80/80-125 8

95360.W0014 8 12,0 7,5 M 6 40-80/80-125 9

95360.W0017 8 12,0 7,5 M 8 125-200 14

95360.W0019 10 15,0 9,5 M 8 125-200 19

Hook Spanners, With Hook Nosefixed - DIN 1810A

95400

wixroyd.com

Material


Blackened. Edgewise ground.

Technical Notes

Specials available on request,

subject to minimum quantities.

Tips

Items marked *, thickness varies

from DIN Standard. For slotted nuts

to DIN 1804 and DIN 981.

Order No.

d1

Nut dia.

min. - max.

Thread size of

nut DIN 1804 M

Thread size of

nut DIN 981 Ml1

b1

Xg

95400.W0014 12-14 - - 110 3 25

95400.W0020 16-20 6-8 10 110 3 25

95400.W0028 25-28 10-12 15-17 136 4 45

95400.W0032 30-32 14-16 20 136 4 50

95400.W0036 34-36 18-20 - 170 5 90

95400.W0042 40-42 22-24 - 170 5 90

95400.W0050 45-50 26-30 30 206 6 155

95400.W0055 52-55 32-35 25 206 6 160

95400.W0062 58-62 38-42 40 240 7 260

95400.W0075 68-75 45-50 55 240 7 255

95400.W0090 80-90 52-60 60 280 8 410

95400.W0100 95-100 62-70 - 280 8 405

95400.W0115 110-115 72-80 85 335 10 745

95400.W0130 120-130 85-90 90-100 335 10 720

95400.W0146 135-145 95-100 110 385 10* 1000

95400.W0166 155-165 105-120 120-130 385 10* 965

95400.W0196 180-195 125-140 140-150 470 10* 1500

95400.W0221 205-220 150-160 170 470 10* 1580

95400.W0246 230-245 170-180 180 568 10* 2250

95400.W0271 260-270 190-200 - 568 10* 2250

95400.W0300 280-300 - - 680 15 5150

95400.W0320 300-320 - - 695 15 5100

95400.W0345 320-345 - - 695 15 5200

95400.W0375 350-375 - - 735 15 5200

95400.W0400 380-400 - - 770 15 6700

95400.W0500 480-500 - - 988 20 13000

Hook Spanners, With Hook Nosefixed - DIN 1810A

95400

wixroyd.com

Material


Blackened. Edgewise ground.

Technical Notes



Tips


from DIN Standard. For slotted nuts

to DIN 1804 and DIN 981.

Hook Spanners, With Hook Nosespring loaded, adjustable

95420

wixroyd.com

Material


Blackened.

Tips

For slotted nuts DIN 1804 and DIN

981.

Order No.

d1

Nut dia.

min. - max.

l1

b1

Xg

95420.W0002 20-42 180 4,0 100

95420.W0005 45-90 240 6,0 250

95420.W0009 95-165 335 10,0 710

Hook Spanners, With Pin Nosefixed - DIN 1816

95450

wixroyd.com

Material

Steel C35/C45, hardened and

blackened. Edgewise ground.

Technical Notes


including stainless steel models -


Tips


from DIN Standard. For round nuts

with set pin holes to DIN 1816.

Order No.

d1

Nut dia.

min. - max.

Thread size of

nut

DIN 1816M

d2

a11

l2

l1

b1

Xg

95450.W0014 12-14 - 2,0 2,0 110 3 25

95450.W0018 16-18 6 2,5 2,5 110 3 25

95450.W0022 20-22 8 2,5 2,5 110 3 25

95450.W0028 25-28 10-12 3,0 3,0 136 4 55

95450.W0032 30-32 14-16 4,0 3,0 136 4 55

95450.W0036 34-36 18-20 4,0 3,5 170 5 100

95450.W0042 40-42 22-24 4,0 3,5 170 5 100

95450.W0050 45-50 26-30 5,0 4,0 206 6 165

95450.W0055 52-55 32-35 5,0 4,0 206 6 165

95450.W0062 58-62 38-42 5,0 5,0 240 7 270

95450.W0075 68-75 45-50 6,0 5,0 240 7 270

95450.W0090 80-90 52-60 6,0 6,0 280 8 410

95450.W0100 95-100 62-70 8,0 6,0 280 8 410

95450.W0115 110-115 72-80 8,0 8,0 335 10 610

95450.W0130 120-130 85-90 8,0 8,0 335 10 610

95450.W0146 135-145 95-100 8,0 8,0 380 10* 790

95450.W0166 155-165 105-120 8,0 8,0 380 10* 790

95450.W0196 180-195 125-140 10,0 8,0 470 10* 1500

95450.W0221 205-220 150-160 10,0 8,0 470 10* 1580

95450.W0246 230-245 170-180 10,0 10,0 568 10* 2250

95450.W0271 260-270 190-200 10,0 10,0 568 10* 2250

Chip Hookswith flexible guard

97050

wixroyd.com

Material

Hook and guard: steel.

Handle: wood.

Technical Notes

Excellent for removing swarf or

chips from in and around work piece

- extended hook minimises risk to

operator.

Part number 97050.W2050 has rigid

fixing (brazed-soldered).

All other parts have flexible fixing

(rubber).

Important Notes

Take all necessary safety

precautions when using this

product in or around working

machinery - if in doubt shut down

machinery.

Order No. d1

l1

l2

l3

d2

97050.W2020 5 180 125 305 115

97050.W2030 6 300 130 410 130

97050.W2040 6 400 130 530 140

97050.W2050 6 400 130 530 140

Chip Hookswith hand guard

97052

wixroyd.com

Material

Hook: steel.

Guard: plastic.

Handle: wood.

Technical Notes




operator.

Important Notes





machinery.

Order No. d1

l1

l2

l3

d2

97052.W2060 6 400 180 570 180

97052.W2070 7 500 180 670 180

Chip Hooks - with Guardwith hand guard and extended handle

97053

wixroyd.com

Material

Hook: steel.

Guard: plastic.

Handle: wood.

Technical Notes




operator.

Important Notes





machinery.

Order No. d1

l1

l2

l3

d2

97053.W2080 7 500 320 820 180

97053.W2090 8 800 320 1120 180

97053.W2100 8 1000 320 1320 180

Chip Pincerswith hand guard

97060

wixroyd.com

Material

Handle and cutter: steel.

Guard: plastic or aluminium.

Important Notes





machinery.

Order No. Guard type l1

l2

l3

d1

97060.W1025 Aluminium 175 155 330 85

97060.W1035 Plastic 175 180 355 180

Chip Cutter and Hookwith hand guard

97061

wixroyd.com

Material

Handle and cutter: steel.

Guard: plastic or aluminium.

Technical Notes

Max. capacity of cutter is clip

section of 1.5mm sq e.g. 0,25 x

6mm

Tips

97061 has added benefit of hook as

well as cutter for improved removal

of difficult to reach swarf/chips.

Important Notes





machinery.

Order No. Guard type l1

l2

l3

d1

97061.W1050 Aluminium 165 155 320 85

97061.W1060 Plastic 165 180 345 180

Application selection chart

TPE-

soft

Soft

Com-

posite

rubber

Med

TPE-

mid

Med

Plastic

Hard

Super

plastic

Med

Nylon

Hard

Alu

Hard

Copper

Hard

98301

wood

98301

steel

98301

fibre

98310 98321 98401 98330

Range of inserts for Simplex Mallets 98001 to 98224

Construction applications

Paving • • •Floor tiling • •

Curbstone setting / Masonry work • •Concrete form set-up • •Scaffold construction • • • •

Tent and hall construction • • •Gardening and landscaping • •

Home construction • •

Metal-working industry applications

Automotive assembly and repair work • • • • • • • • • • • •Positioning of workpieces in a vice • • • • •

Straightening work • • • • •Joining of workpieces • • • • • • •

Repair and maintenance work • • • • • • • •Car body work • • • • • • • • •

Sheet metal working • • • • • • • • •Dent removal • • • • • • • •

Housing assembly • • • • • • • •Mould construction • • •

Assembly of sharp-edged workpieces • • • • • •

Wood-working applications

Furniture assembly • • • •Window and door construction • • • •

Prefabricated house construction •Joiner’s work • • • •

Carpenter’s work •Floor parqueting / laminating •

Agriculture and forestry applications

Fence construction • • •Wood splitting with wedge • •

Maintenance and repair work on

agricultural machinery• • •

Application selection chart

0845 26 66 577 [email protected]

Soft Face Mallets and Hammerso

v-98

00

1-9

85

02

-a - Up

dated

- 12

-01

-20

17

Simplex Malletswith cast iron housing and wooden handle

98001

wixroyd.com

Technical Notes

For full range of inserts see part

98004.

Tips

Inserts, housings and handles can

be bought separately creating a

flexible easy to use modular mallet

system.

Order No. Inserts w1

l1

Xg

98001.W0130 TPE Soft - Blue 30 90 300 345

98001.W0140 TPE Soft - Blue 40 110 330 620

98001.W0150 TPE Soft - Blue 50 135 350 1170

98001.W0160 TPE Soft - Blue 60 145 405 1530

98001.W0230 Composite Rubber - Black 30 90 300 340





98001.W0330 TPE - Mid Grey 30 90 300 335

98001.W0340 TPE - Mid Grey 40 110 330 610

98001.W0350 TPE - Mid Grey 50 135 350 1110

98001.W0360 TPE - Mid Grey 60 145 405 1480

98001.W0430 Plastic - Red 30 90 300 340

98001.W0440 Plastic - Red 40 110 330 620

98001.W0450 Plastic - Red 50 135 350 1130

98001.W0460 Plastic - Red 60 145 405 1490

98001.W0530 Super Plastic - White 30 90 300 330





98001.W0630 Nylon - White 30 90 300 335

98001.W0640 Nylon - White 40 110 330 610

98001.W0650 Nylon - White 50 135 350 1145

98001.W0660 Nylon - White 60 145 405 1510

98001.W0680 Nylon - White 80 175 490 3090

Simplex Malletswith cast iron housing and wooden handle

98001

wixroyd.com

Technical Notes


98004.

Tips




system.


l1

Xg

98001.W0730 Aluminium 30 90 300 390

98001.W0740 Aluminium 40 110 330 750

98001.W0750 Aluminium 50 135 350 1380

98001.W0760 Aluminium 60 145 405 1940

98001.W0780 Aluminium 80 175 490 3830

Simplex Malletshousing for no. 98001

98002

wixroyd.com

Material

Cast iron housing (2 parts).

Order No.For mallet head

d1

d1

98002.W0131 30 30

98002.W0141 40 40

98002.W0151 50 50

98002.W0161 60 60

98002.W0181 80 80

Simplex Malletshandle for no. 98001

98003

wixroyd.com

Material

Wooden handle.


d1

d1

l1

98003.W0231 30 30 260

98003.W0241 40 40 275

98003.W0251 50 50 310

98003.W0261 60 60 335

98003.W0281 80 80 395

Simplex Malletsinserts for no. 98001, 98103 & 98101

98004

wixroyd.com

Important Notes

Aluminium inserts

98004.W0733-W0788 not for use

in light alloy housings 98022.

Copper inserts 98004.W0833 and

W0844 only for use in reinforced

housing no. 98002.

Order No. TypeFor mallet head

d1

98004.W0133 TPE Soft - Blue 30




98004.W0233 Composite Rubber - Black 30





98004.W0333 TPE Mid - Grey 30

98004.W0344 TPE Mid - Grey 40

98004.W0355 TPE Mid - Grey 50

98004.W0366 TPE Mid - Grey 60

98004.W0433 Plastic - Red 30

98004.W0444 Plastic - Red 40

98004.W0455 Plastic - Red 50

98004.W0466 Plastic - Red 60

98004.W0533 Super Plastic - White 30





98004.W0633 Nylon - White 30

98004.W0644 Nylon - White 40

98004.W0655 Nylon - White 50

98004.W0666 Nylon - White 60

98004.W0688 Nylon - White 80

98004.W0733 Aluminium 30





98004.W0833 Copper - With Plastic Bush 30

98004.W0844 Copper - With Plastic Bush 40

Simplex Malletswith light alloy housing and wooden handle

98021

wixroyd.com

Technical Notes


98004.

Important Notes

Soft metal inserts no.

98004.W0733-W0788 must not be

used in light alloy housing no.

98021 or 98022.

Order No. Insert type w1

l1

Xg

98021.W0130 TPE - Soft Blue 30 90 300 180

98021.W0140 TPE - Soft Blue 40 110 330 380

98021.W0150 TPE - Soft Blue 50 135 350 640

98021.W0160 TPE - Soft Blue 60 145 405 880

98021.W0230 TPE - Rubber 30 90 300 280

98021.W0240 TPE - Rubber 40 110 330 350

98021.W0250 TPE - Rubber 50 135 350 610

98021.W0260 TPE - Rubber 60 145 405 860

98021.W0330 TPE - Mid Grey 30 90 300 200

98021.W0340 TPE - Mid Grey 40 110 330 380

98021.W0350 TPE - Mid Grey 50 135 350 620

98021.W0360 TPE - Mid Grey 60 145 405 860

98021.W0430 Plastic - Red 30 90 300 190

98021.W0440 Plastic - Red 40 110 330 370

98021.W0450 Plastic - Red 50 135 350 620

98021.W0460 Plastic - Red 60 145 405 830





98021.W0630 Nylon - White 30 90 300 190

98021.W0640 Nylon - White 40 110 330 370

98021.W0650 Nylon - White 50 135 350 615

98021.W0660 Nylon - White 60 145 405 850

Simplex Malletswith light alloy housing and wooden handle

98021

wixroyd.com

Technical Notes


98004.

Important Notes

Soft metal inserts no.

98004.W0733-W0788 must not be

used in light alloy housing no.

98021 or 98022.

Simplex Malletslight alloy housing for no. 98021

98022

wixroyd.com

Material

Light alloy housing (2 parts).


d1

d1

98022.W0131 30 30

98022.W0141 40 40

98022.W0151 50 50

98022.W0161 60 60

Simplex Malletswooden handle for no. 98021

98023

wixroyd.com

Material

Wooden handle.


d1

l1

98023.W0231 30 260

98023.W0241 40 270

98023.W0251 50 310

98023.W0261 60 335

98023.W0281 80 395

Simplex Mallets - Type C - Blackwith cast iron housing and fibre glass handle

98101

wixroyd.com

Technical Notes


98004.

Tips


be bought separately to create a

flexible easy to use modular mallet.


l1

Xg

98101.W0130 TPE Soft - Blue 30 90 300 410

98101.W0140 TPE Soft - Blue 40 110 330 880

98101.W0150 TPE Soft - Blue 50 135 330 1180

98101.W0160 TPE Soft - Blue 60 145 410 1720






98101.W0330 TPE Mid - Grey 30 90 300 400

98101.W0340 TPE Mid - Grey 40 110 330 850

98101.W0350 TPE Mid - Grey 50 135 330 1180

98101.W0360 TPE Mid - Grey 60 145 410 1590

98101.W0430 Plastic - Red 30 90 300 400

98101.W0440 Plastic - Red 40 110 330 880

98101.W0450 Plastic - Red 50 135 330 1150

98101.W0460 Plastic - Red 60 145 410 1680






98101.W0630 Nylon - White 30 90 300 440

98101.W0640 Nylon - White 40 110 330 860

98101.W0650 Nylon - White 50 135 330 1240

98101.W0660 Nylon - White 60 145 410 1770

98101.W0680 Nylon - White 80 175 490 3390

Simplex Mallets - Type C - Blackwith cast iron housing and fibre glass handle

98101

wixroyd.com

Technical Notes


98004.

Tips


be bought separately to create a

flexible easy to use modular mallet.


l1

Xg

98101.W0730 Aluminium 30 90 300 490

98101.W0740 Aluminium 40 110 330 1000

98101.W0750 Aluminium 50 135 330 1480

98101.W0760 Aluminium 60 145 410 2190

98101.W0780 Aluminium 80 175 490 4130

98101.W0830 Copper - With Bush 30 90 300 680

98101.W0840 Copper - With Bush 40 110 330 1400

Simplex Mallets - Type Creinforced housing for no. 98101

98102

wixroyd.com

Material

Reinforced housing (2 parts,

malleable cast iron).


d1

d1

98102.W0131 30 30

98102.W0141 40 40

98102.W0151 50 50

98102.W0161 60 60

98102.W0181 80 80

Simplex Mallets - Type Cfibre glass handle for no. 98101

98103

wixroyd.com

Material

Fibre glass handle.


d1

l1

98103.W0231 30 260

98103.W0241 40 267

98103.W0251 50 267

98103.W0261 60 340

98103.W0281 80 400

98103.W0282 80 700

Simplex Sledge Hammerswith malleable cast iron housing and wooden handle

98201

wixroyd.com

Tips




system. For full range of inserts see

part 98204.Order No. d

1Inserts w

1l1

Xg

98201.W0081 80 Super Plastic - White 175 800 3240




98201.W0181 80 Composite Rubber - Black 175 800 3250

98201.W0281 80 Composite Rubber - Black/Super Plastic White 175 800 3200

Simplex Sledge Hammershandles for no. 98201

98202

wixroyd.com

Material

Handle: wood.


d1

l1

98202.W0208 80 700

98202.W0210 100 900

98202.W0215 125 900

98202.W0240 140 900

Simplex Sledge Hammershousing for no. 98201

98203

wixroyd.com

Material

Cast iron housing (2 parts).


d1

d1

98203.W0300 80 80

98203.W0310 100 100

98203.W0325 125 125

98203.W0340 140 140

Simplex Sledge Hammersinserts for no. 98201

98204

wixroyd.com

Material

Composite rubber: black.

Superplastic: white.

Order No. InsertsFor mallet head

d1






Simplex Sledge Hammers - Type C - Blackwith reinforced housing, fibre glass handle & aluminium insert

98221

wixroyd.com

Material

Insert: aluminium.

Tips


98224.

Order No. d1

w1

l1

Xg

98221.W0081 80 175 800 4410

Simplex Sledge Hammers - Type Creinforced housing, for 98221

98222

wixroyd.com

Material

Reinforced housing (2 parts,

malleable cast iron).


d1

98222.W0181 80

Simplex Sledge Hammers - Type Chandle for 98221

98223

wixroyd.com

Material

Fibre glass handle.

Important Notes

Fibre glass handles must only be

mounted on reinforced malleable

cast iron housing - black

98222.W0181.


d1

l1

98223.W0208 80 700

Simplex Sledge Hammers - Type Cinsert for 98221

98224

wixroyd.com

Material

Aluminium.


d1


Supercraft Non-Rebound Malletsnylon insert

98301

wixroyd.com

Material

Housing: steel, shot filled.

Inserts: nylon, made from extruded

tube material.

Handle: wood, fibre glass or steel.

Steel and fibre glass handles

include rubber grip.

Technical Notes

Shot filled housing results in a

non-rebound action and assists in

full transmission of impact force.

Inserts are replaceable.

Order No. Handle type w1

l1

Xg

98301.W0020 Wood 20 105 300 230

98301.W0025 Wood 25 105 305 300

98301.W0030 Wood 30 110 330 430

98301.W0035 Wood 35 110 335 550

98301.W0040 Wood 40 115 360 750

98301.W0045 Wood 45 120 365 850

98301.W0050 Wood 50 120 370 1000

98301.W0060 Wood 60 145 370 1700

98301.W0070 Wood 70 150 370 2300

98301.W0080 Wood 80 168 380 3300

98301.W0125 Steel 25 105 270 370

98301.W0130 Steel 30 110 290 580

98301.W0135 Steel 35 110 295 700

98301.W0140 Steel 40 115 300 850

98301.W0145 Steel 45 120 305 900

98301.W0150 Steel 50 120 310 1200

98301.W0160 Steel 60 145 325 1780

98301.W0170 Steel 70 150 335 2400

98301.W0240 Fibre Glass 40 116 370 780

98301.W0250 Fibre Glass 50 120 380 1090

98301.W0260 Fibre Glass 60 145 390 1660

Supercraft Non-Rebound Malletsnylon insert

98301

wixroyd.com

Material



tube material.

Handle: wood, fibre glass or steel.

Steel and fibre glass handles

include rubber grip.

Technical Notes





Supercraft Malletshickory handle for no. 98301

98302

wixroyd.com

Material

Handle: hickory wood.


d1

l1

98302.W0320 20 280

98302.W0325 25 280

98302.W0330 30 300

98302.W0330 35 300

98302.W0340 40 315

98302.W0340 45 315

98302.W0340 50 315

98302.W0360 60 300

98302.W0360 70 300

98302.W0360 80 300

Supercraft Malletsnylon insert for no. 98301

98303

wixroyd.com

Material

Insert: nylon white.


d1

98303.W0420 Nylon - White 20

98303.W0425 Nylon - White 25

98303.W0430 Nylon - White 30

98303.W0435 Nylon - White 35

98303.W0440 Nylon - White 40

98303.W0445 Nylon - White 45

98303.W0450 Nylon - White 50

98303.W0460 Nylon - White 60

98303.W0470 Nylon - White 70

98303.W0480 Nylon - White 80

Black Craft Non-Rebound Malletswith steel head and rubber grip handle

98310

wixroyd.com

Material

Housing: steel, polyurethane

coating.

Handle: steel, ergonomic rubber

grip.

Technical Notes




Tips

Automobile assembly and repair

work, positioning of work pieces in

the vice, sheet-metal working, dent

removal.

Order No. d1

w1

l1

Xg

98310.W0040 40 110 300 700

98310.W0050 50 115 310 1000

98310.W0060 60 120 315 1300

Black Craft Non-Rebound Malletswith steel head and rubber grip handle

98310

wixroyd.com

Material

Housing: steel, polyurethane

coating.

Handle: steel, ergonomic rubber

grip.

Technical Notes




Tips



the vice, sheet-metal working, dent

removal.

Secural Non-Rebound Malletshead from cut steel plate with rubber grip handle

98321

wixroyd.com

Material

Housing: from cut steel plate.

Handle: sheet metal, ergonomic

rubber grip.

Inserts: polyurethane, yellow.

Medium hard.

Technical Notes





Tips



the vice, furniture assembly,

window and door construction,

joiner's work.

Order No. d1

w1

l1

Xg

98321.W0040 30x40 117 300 700

Secural Non-Rebound Malletshead from cut steel plate with rubber grip handle

98321

wixroyd.com

Material

Housing: from cut steel plate.

Handle: sheet metal, ergonomic

rubber grip.

Inserts: polyurethane, yellow.

Medium hard.

Technical Notes





Tips



the vice, furniture assembly,

window and door construction,

joiner's work.

Secural Malletspolyurethane insert for 98321

98322

wixroyd.com

Material

Insert: polyurethane, yellow.

Technical Notes

Replacement inserts for secural

mallet no. 98321.

Order No.For mallet size

d1

x w1

98322.W0141 30x40

Ferroplex-Combination Tool 98330

wixroyd.com

Material

Head: steel.

Handle: steel tube, with rubber

grip.

Hammer faces: 1 x heat treated

steel induction hardened. 1 x nylon

- white.

Technical Notes

Nylon insert can be replaced, see

replacement part 98363.W0480 and

98363.W0482.

Tips

For use in assembly work,

automotive industry as well as

general maintenance and service

applications.

Order No. d1

w1

l1

Xg

98330.W0030 30 104 290 600

98330.W0035 35 104 295 800

Ferroplex-Combination Tool 98330

wixroyd.com

Material

Head: steel.

Handle: steel tube, with rubber

grip.

Hammer faces: 1 x heat treated

steel induction hardened. 1 x nylon

- white.

Technical Notes

Nylon insert can be replaced, see

replacement part 98363.W0480 and

98363.W0482.

Tips

For use in assembly work,

automotive industry as well as

general maintenance and service

applications.

Supercraft Non-Rebound Sledge Hammersnylon insert

98361

wixroyd.com

Material



tube material.

Handle: wood.

Technical Notes




Inserts are replaceable see part

98363.

Order No. d1

w1

l1

Xg

98361.W0080 80 200 880 4000

98361.W0100 100 210 1000 7000

Supercraft Non-Rebound Sledge Hammersnylon insert

98361

wixroyd.com

Material



tube material.

Handle: wood.

Technical Notes





98363.

Supercraft Sledge Hammershandle for 98361

98362

wixroyd.com

Material

Handle: wooden.


d1

l1

98362.W0381 80 800

98362.W0382 100 900

Supercraft Sledge Hammersinserts for no. 98361

98363

wixroyd.com

Material



d1

98363.W0480 Nylon - White 80

98363.W0482 Nylon - White 100

Splitting Maul Simplex Mallet 98381

wixroyd.com

Material

Housing: malleable Cast iron.

Handle: wood, hickory.

Inserts: superplastic, white. Medium

hard.

Splitting Maul: carbon steel,

drop-forged and hardened, with

turned nose.

Technical Notes

Two tools in one, both splitting

maul for wood harvesting and soft

face mallet for hammering stakes

and fencing posts.

Tips

Safety approved by VPA RewScheid.

Please follow general safetyinstructions and guidelines typicalfor use of powertools and cuttingequipment. Wear suitableprotective clothing and eyewear.

Important Notes

Do not strike steel with thesplitting insert - can result insplintering and injury. Use onlyoriginal Wixroyd Simplex Malletparts when replacing handle orinserts.


l1

Xg

98381.W0065 Splitting Maul/Super Plastic 60 65 900 4100

Splitting Maul Simplex Malletcast iron housing for no. 98381

98382

wixroyd.com

Material

Malleable Cast Iron housing

Important Notes

Cast iron housing Part no.

98382.W0160 must only be used

with spare parts of the Simplex

Splitting Maul.


d1

d1

Xg

98382.W0160 160 160 1900

Splitting Maul Simplex Malletwooden handle for no. 98381

98383

wixroyd.com

Material

Hickory

Important Notes

Hickory handles part 98383.W0260

must only be mounted into cast iron

housing 98382.W0160.

Order No. Mallet size d1

l1

Xg

98383.W0260 160 160 850 750

Splitting Maul Simplex Malletinserts for no. 98381

98384

wixroyd.com

Material

Splitting Maul: carbon steel, drop

forged and tempered.

Plastic Insert: superplastic, white.


d1

d1

Xg

98384.W0360 Splitting Maul 160 160 1340

Rebound Punchesnylon insert

98401

wixroyd.com

Material

Insert: nylon, white.

Technical Notes


98402.

Order No. Type d1

l1

Xg

98401.W0010 Nylon - White 10 168 100

98401.W0012 Nylon - White 12 170 130

98401.W0015 Nylon - White 15 175 200

Rebound Punchesreplaceable nylon insert for 98421

98402

wixroyd.com

Material



d1

98402.W0110 Nylon - White 10

98402.W0112 Nylon - White 12

98402.W0115 Nylon - White 15

Non-Rebound Drop Malletsnylon insert

98421

wixroyd.com

Material

Housing: steel.

Insert: nylon - white.

Technical Notes




Inserts are replaceable. See part

98422.

Order No. d1

l1

Xg

98421.W0020 20 150 220

98421.W0025 25 150 330

98421.W0030 30 155 460

98421.W0035 35 155 650

98421.W0040 40 160 820

98421.W0045 45 160 1000

98421.W0050 50 165 1250

Non-Rebound Drop Malletsreplaceable nylon insert for 98421

98422

wixroyd.com

Material

Insert: nylon - white.


d1

98422.W0120 Nylon - White 20

98422.W0125 Nylon - White 25

98422.W0130 Nylon - White 30

98422.W0135 Nylon - White 35

98422.W0140 Nylon - White 40

98422.W0145 Nylon - White 45

98422.W0150 Nylon - White 50

MaxxCraft Locksmith's Hammer 98501

wixroyd.com

Material

Head: drop-forged, high quality

Steel. Face ground, chamfered

edge.

Handle: hickory, with protective

rubber sleeve to reduce rebound

and increase power of impact while

reducing shock and vibration in the

users arm.

Order No. l1

Xg

98501.W0030 300 300

98501.W0032 320 500

98501.W0035 350 800

98501.W0036 360 1000

MaxxCraft Handlereplacement handle for part 98501

98502

wixroyd.com

Material

Handle: hickory

Order No. For l1

Xg

98502.W0203 MaxxCraft 300 265 100

98502.W0205 MaxxCraft 500 280 120

98502.W0208 MaxxCraft 800 305 170

98502.W0210 MaxxCraft 1000 310 180

Soft Face Mallets and Hammers - Hillcliff · PDF filea division of Wixroyd 797 HAND TOOLS...

Documents

Transcript of Soft Face Mallets and Hammers - Hillcliff · PDF filea division of Wixroyd 797 HAND TOOLS...