Post on 06-Jun-2020
1
Scrapbooking Workshops Your Way‰
Grateful Heart | 3 layouts & 8 optional cards
3 µ 3 3 µ 4 (P) 3 µ 4 (L) 4 µ 4 4 µ 6 (P) 4 µ 6 (L) 5 µ 7 (P)
Project 1 4 - - - - - 1
Project 2 - - 1 - 1 2 -
Project 3 - 4 - 2 1 - -
(P) = portrait (L) = landscapeGather photos (16 total)
Getting Started:
• Gather all additional materials needed.• Trim all zip strips and set aside. The zip strip is the ½" accent paper along the top of each sheet.• Trim all pocket cards and set aside.• Check the cut orientation below each cutting guide image. This will show you how to cut the paper, keeping the patterns on your project
pieces facing the right direction.• Light grey pieces on your cutting guide are project pieces. Dark grey pieces are optional project pieces. White pieces are left over paper.• As you cut the paper, sort the pieces as indicated in the cutting guide, creating a stack for each project.
© 2018 CTMH CO. UC
2© 2018 CTMH CO. UC
Key:
= first cut | * = use back of paper = suggested stamp arrangement | = suggested Thin Cuts arrangement | = suggested Cricut® cut arrangement
(See project instructions for ink color and other details)
Cutting Diagrams:
zip strips
3B: 12 µ ½
1E: 8 µ ½ Project 1 Accent: 3 µ ½
7B: 5 µ ½ (cut 2)
1G: 7½ µ ½ 3I: 4 µ ½
3E: 3 µ ½ 3J: 3 µ ½
3G: 12 µ ½
2F: 10½ µ ½
7C: 4¼ µ ½ (cut 2)
pocket cards
3D: 4 µ 6 journaling 1 µ 3 accent
Project 2 Accent:
Project 3 Accent: (Pocket Plus™)
Project 1 Accent:
3
2H: 3 µ 4 journaling
3 µ 4 journaling
2B4¼ µ 12
2E7¾ µ 10½
1B* 7½ µ ¾1C 7 µ ¾
3F*2 µ 12
3A*1½ µ 12
6A3¼ µ 4½
6A3¼ µ 4½
1H3 µ 3
1J*3 µ 3
6C* 3 µ ¾6C* 3 µ ¾
Project 3 Accent2 µ ½
front *back
cut orientation
front *back
cut orientation
1K: 3 µ 2¾
© 2018 CTMH CO. UC
4© 2018 CTMH CO. UC
cut diagonal = angle in trimmer
3E1 µ 8
3C & 3H½ µ 12
5D2¾ µ 4
5D2¾ µ 4
1A4½ µ 12
5B*¼ µ 5½(cut 2)
1L3 µ 3
Project 1 Accent*3 µ ¼
5A1¾ µ 4¼(cut 2)
6E1 µ 3½(cut 2)
5E2 µ 3¼
5E2 µ 3¼
Project 33 µ 4
(Pocket Plus™)
White Daisy cardstock
2G¼ µ 6
1D1½ µ 9
6D¾ µ 3½(cut 2)
4A*½ µ 4¼(cut 2)
1I3 µ 3
2C & 2D¼ µ 4
2A5 µ 12
7A*1 µ 5½(cut 2)
1F*1½ µ 9
6B*1 µ 2½(cut 2)
5C1¼ µ 5½(cut 2)
front *back
cut orientation
front *back
cut orientation
light * dark
Mink cardstock
5
Project 1
© 2018 CTMH CO. UC
Photo3 × 3
Photo3 × 3
Photo3 × 3
Photo3 × 3
¼1¼
1¼
¼
1H
1I 1K
1J 1L
Journaling 1
1. Use Sapphire cross-hatch paper for base page2. Embellish 1A with ribbon
Tip: Wrap ribbon around, 1½" from top, and secure on back. Attach a separate bow with a glue dot.
3. Attach 1A 4. Attach 1B, 1C, 1D, 1E, 1F, and 1G5. Attach photo
Tip: Center on 1A.6. Embellish with Complements
Tip: Attach a few Complements with thin 3-D foam tape for added dimension.
Assemble left page:
3¾
2½2
Photo5 × 7 (P)
1A
1B
1C
1D
1E
1F
1G
2¼
Title 1
1. Use Sapphire cross-hatch paper for base page2. Attach 1H and top row photos3. Attach 1I, 1K, and second row photo4. Attach 1J, 1L, and bottom row photo5. Attach accent pieces as shown6. Embellish with Complements, ribbon, and cork shape as shown
Tip: Attach a few Complements with thin 3-D foam tape for added dimension.
7. Add journaling
Assemble right page:
6
Project 2
© 2018 CTMH CO. UC
½
1¾
2
¼
Photo4 × 6 (L)
Photo4 × 6 (L)
2A 2B
2C
2D
¾
¾
2¾
¾
3¼
½
¼Photo4 × 6 (P)
Photo3 × 4 (L)
2E
2H
2F
2G
Title 2
Journaling 2
1. Use Mink crosses paper for base page2. Attach 2A 3. Attach 2B4. Attach 2C, 2D, and photos 5. Attach accent with thin 3-D foam tape6. Embellish with Complements and cork shape
Tip: Attach a few Complements with thin 3-D foam tape for added dimension.
Assemble left page:
1. Use Mink crosses paper for base page2. Attach 2E and 2F3. Attach 2G and photos4. Attach 2H5. Embellish with Complements and cork shapes
Tip: Attach a few Complements with thin 3-D foam tape for added dimension.
6. Add journaling
Assemble right page:
7
Project 3
© 2018 CTMH CO. UC
¾
Title 3
1¾ 1½
½Photo3 × 4 (P)
Photo3 × 4 (P)
¼
3A
3D
3B 3C
Photo4 × 6 (P)
3E
¾
1½
½
Photo3 × 4 (P)
Photo3 × 4 (P)
Photo4 × 4
Photo4 × 4
¼
3J 3I
3H3G 3F
1. Use White Daisy cardstock for base page2. Attach 3A, 3B, 3C, and 3D3. Attach photos4. Attach 3E 5. Embellish with Complements and cork shape
Tip: Attach a few Complements with thin 3-D foam tape for added dimension.
Assemble left page:
1. Use White Daisy cardstock for base page2. Attach 3F, 3G, and 3H3. Attach photos4. Attach 3I and 3J5. Attach accent piece
Tip: Tear ends before attaching. 6. Embellish with Complements and cork shapes7. Expand this layout with 4-inch wide Pocket Plus™
Memory Protectors™
Assemble right page:
8© 2018 CTMH CO. UC
Pocket Plus™
Optional Pocket Plus™ Add-on | 4¬inch wide
front inside back
Project 3 Project 3
9
Optional Cardmaking Projects
© 2018 CTMH CO. UC
Project 4: Make 2 Project 5: Make 2
Project 6: Make 2 Project 7: Make 2
10
C1727 My Acrylix® Grateful Heart—Cardmaking Stamp SetZ2850 Fern Exclusive Inks™ Stamp PadZ2854 Pomegranate Exclusive Inks™ Stamp PadZ2851 Saffron Exclusive Inks™ Stamp PadZ2848 Sapphire Exclusive Inks™ Stamp PadZ2027 Mini StaplerZ341 Glue Dots® Mini DotsX254 White Cards & Envelopes Value Pack
Additional Materials Needed: Stamp Set:
© 2018 CTMH CO. UC
FOLD
4A
11© 2018 CTMH CO. UC
Project 4: Make 2 Prepare (2):
Assemble:
Paper: White DaisyInks: Pomegranate, Saffron, Sapphire Tips: First, stamp butterfly in Sap-phire. On top of Sapphire outline, stamp inside color using second-generation and rock & roll stamping with the back side of the stamp. Hand trim, as shown.Techniques: Ink back of stamp with Saffron, stamp on scratch paper, and then gently roll the rounded outer edges in Pomegranate. Stamp on prep piece.
1. Prepare piece shown above2. Attach 4A to card base3. Stamp sentiment and butterfly with Sapphire ink on card base4. Stamp outline leaves with Sapphire ink and shade with
Fern ink5. Stamp solid leaves with Saffron ink6. Stamp sprig with Fern ink7. Stamp berries with Pomegranate ink8. Attach butterfly wings over stamped image on card base
Tip: For added dimension, use one glue dot on the point (where the head was trimmed) and thin 3-D foam tape on the rounded outer edges.
9. Embellish with ribbon and cork shape10. Staple right edge of 4A
12
FOLD
1
1¾
¾
¾
5A
5D
5B5C
5E
© 2018 CTMH CO. UC
Project 5: Make 2 Prepare (2 each):
Assemble:
1. Prepare pieces shown above2. Attach 5A to card base3. Attach 5B and 5C4. Attach 5E to 5D 5. Embellish 5D with staples6. Attach 5D to card7. Embellish with ribbon and cork shape
5E:Paper: White DaisyInks: Fern, Saffron, SapphireTips: First, stamp top solid leaf us-ing rock & roll stamping. Then, use second-generation stamping for lower leaf. Last, stamp leaf outline with Sapphire ink.Techniques: Ink solid leaf stamp with Saffron, then gently roll the bottom of the stamp in Fern. Stamp on prep piece. For second-generation image, stamp second leaf without re-inking.
5A:Paper: White DaisyInk: Fern
13
FOLD
½
½
½
1
1¾6A
6D6E
6C 6B
© 2018 CTMH CO. UC
Project 6: Make 2 Prepare (2):
Assemble:
6E:Paper: White DaisyInk: Sapphire
1. Prepare piece shown above2. Attach 6A3. Dovetail 6B and 6C, and then attach4. Attach 6E to top of 6D and dovetail right end5. Embellish 6E with staples6. Attach 6E with thin 3-D foam tape7. Stamp arrow twice with Sapphire ink on 6A8. Embellish with cork shape
14
FOLD
¾1½1¼
7B7C
7A
© 2018 CTMH CO. UC
Project 7: Make 2 Prepare (2):
Assemble:
1. Prepare piece shown above2. Attach 7A3. Dovetail 7B and 7C and attach4. Stamp “hello” with Pomegranate ink on
card base5. Stamp “friend” with Sapphire ink on card base6. Stamp butterfly with Sapphire ink on
card base7. Stamp sprig twice above sentiment with
Saffron ink Tip: Use first and second-generation stamping. Technique: Stamp sprig, then stamp again without re-inking for second- generation image.
8. Attach butterfly wings over stamped image on card base Tip: For added dimension, use one glue dot on the point (where the head was trimmed) and thin 3-D foam tape on the rounded outer edges.
9. Embellish with staples and cork shape
Paper: White DaisyInks: Pomegranate, Saffron, SapphireTips: First, stamp butterfly in Sapphire. On top of Sapphire outline, stamp inside color using second-generation and rock & roll stamping with the back side of the stamp. Last, stamp the dots with Pomegranate ink. Hand trim, as shown.Techniques: Ink back of stamp with Saffron, stamp on scratch paper, and then gently roll the rounded outer edges in Saffron. Stamp on prep piece.