Post on 11-Jan-2016
description
1
2
David A. Palmer, Ph.D.Technical Support, Bio-Rad LaboratoriesAdjunct Professor, Contra Costa College
Real-Time PCR
3
Objectives Today we’ll talk about Real-Time PCR:
1. What is real-time PCR used for?
2. How does real-time PCR work?
3. What chemicals and instruments are used to detect DNA?
4. What does real-time data look like?
5. How can we demonstrate real-time PCR in the classroom?
4
Part 1: What is Real-Time PCR and what is it used for?
5
What is Real-Time PCR?
PCR, or the Polymerase Chain Reaction, is a process for the amplification of specific fragments of DNA.
Real-Time PCR a specialized technique that allows a PCR reaction to be visualized “in real time” as the reaction progresses.
As we will see, Real-Time PCR allows us to measure minute amounts of DNA sequences in a sample!
6
What is Real-Time PCR? Conventional PCR
tells us “what”.
Real-Time PCR
tells us “how much”.
7
What is Real-Time PCR used for?
Real-Time PCR has become a cornerstone of molecular biology. Just some of the uses include:
• Gene expression analysis–Cancer and Drug research
• Disease diagnosis and management–Viral quantification
• Food testing–Percent GMO food
• Animal and plant breeding–Gene copy number
• Forensics–Sample identification and quantification
8
Real-Time PCR in Gene Expression Analysis
Example: BRCA1 Expression Profiling
BRCA1 is a gene involved in tumor suppression.
BRCA1 controls the expression of other genes.
In order to monitor level of expression of BRCA1, real-time PCR is used.
DNA
mRNA
Protein
BRCA1Real-T
ime P
CR
Determine gene expression and publish scientific paper!
9
Real-Time PCR in Disease Management
Example: HIV Treatment
Drug treatment for HIV infection often depends on monitoring the “viral load”.
Real-Time PCR allows for direct measurement of the amount of the virus RNA in the patient.
Viral RNAMeasure amount of virus, adjust prescriptions.
Real-Time PCR
10
Real-Time PCR in Food Testing
Example: Determining percentage of GMO food content
Determination of percent GMO food content important for import / export regulations.
Labs use Real-Time PCR to measure amount of transgenic versus wild-type DNA.
wt DNAGMO DNA
Real-Time PCR
International shipments depend on results!
11
Real-Time PCR in Forensics
Example: Real-Time PCR in Forensic Analysis!
Stain Identification:New Real-Time methods can be directly used to identify the composition of unknown stains, with much better accuracy than traditional “color-change” tests.
DNA Quantification:Since standard forensic STR Genotyping requires defined amounts of DNA, Real-Time PCR can be used to accurately quantify the amount of DNA in an unknown sample!
What is it ??
Enough DNA to ID ??
12
Part 2: How does Real-Time PCR work?
13
How does real-time PCR work?
To best understand what real-time PCR is, let’s review how regular PCR works...
14
The Polymerase Chain Reaction
How does PCR work??
5’
5’
3’
3’
d.NTPs
Thermal Stable DNA Polymerase
Primers5’
3’5’
3’
5’
3’
5’
3’
5’
3’
5’
3’
5’
3’5’
3’
Denaturation
5’
3’
5’
3’
5’
3’
5’
3’
5’
3’5’
3’
Annealing
Add to Reaction Tube
15
The Polymerase Chain Reaction
How does PCR work??
Extension
5’ 3’
5’3’5’ 3’
5’3’
Extension Continued
5’ 3’
5’3’5’
5’
Taq
Taq
3’
5’3’
Taq
Taq5’
5’
Repeat
16
The Polymerase Chain Reaction
How does PCR work??
5’3’5’ 3’
5’3’5’
3’
5’5’3’
3’
5’3’5’ 3’
Cycle 2
4 Copies
Cycle 3
8 Copies
5’3’5’
3’
5’3’5’ 3’
5’3’5’ 3’
5’3’5’ 3’
5’3’5’ 3’
5’3’3’5’
5’3’5’ 3’
5’3’5’ 3’
17
How does Real-Time PCR work?
…So that’s how traditional PCR is usually presented.
In order to understand real-time PCR, let’s use a “thought experiment”, and save all of the calculations and formulas until later…
18
Imagining Real-Time PCR
To understand real-time PCR, let’s imagine ourselves in a PCR reaction tube at cycle number 25…
19
Imagining Real-Time PCR
What’s in our tube, at cycle number 25?
A soup of nucleotides, primers, template, amplicons (the amplified DNA product), enzyme, etc.
1,000,000 copies of the amplicon right now.
20
Imagining Real-Time PCR
How did we get here?
What was it like last cycle, 24?
Almost exactly the same, except there were only 500,000 copies of the amplicon.
And the cycle before that, 23?
Almost the same, but only 250,000 copies of the amplicon.
And what about cycle 22?
Not a whole lot different. 125,000 copies of the amplicon.
21
Imagining Real-Time PCR
How did we get here?
If we were to graph the amount of DNA in our tube, from the start until right now, at cycle 25, the graph would look like this:
0
200000
400000
600000
800000
1000000
1200000
1400000
1600000
1800000
2000000
0 5 10 15 20 25 30 35 40
22
Imagining Real-Time PCR
How did we get here?
0
200000
400000
600000
800000
1000000
1200000
1400000
1600000
1800000
2000000
0 5 10 15 20 25 30 35 40
So, right now we’re at cycle 25 in a soup with 1,000,000 copies of the target.
What’s it going to be like after the next cycle, in cycle 26?
?
23
Imagining Real-Time PCR
So where are we going?
0
200000
400000
600000
800000
1000000
1200000
1400000
1600000
1800000
2000000
0 5 10 15 20 25 30 35 40
What’s it going to be like after the next cycle, in cycle 26?
Probably there will be 2,000,000 amplicons.
And cycle 27?
Maybe 4,000,000 amplicons.
24
Imagining Real-Time PCR
So where are we going?
What’s it going to be like after the next cycle, in cycle 26?
Probably there will be 2,000,000 amplicons.
And cycle 27?
Maybe 4,000,000 amplicons.
And at cycle 200?
In theory, there would be 1,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000 amplicons…
Or 10^35 tons of DNA…
To put this in perspective, that would be equivalent to the weight of ten billion planets the size of Earth!!!!
25
Imagining Real-Time PCR
So where are we going?
A clump of DNA the size of ten billion planets won’t quite fit in our PCR tube anymore!!!
Realistically, at the chain reaction progresses, it gets exponentially harder to find primers, and nucleotides. And the polymerase is wearing out.
So exponential growth does not go on forever!
26
Imagining Real-Time PCR
So where are we going?
If we plot the amount of DNA in our tube going forward from cycle 25, we see that it actually looks like this:
0
500000
1000000
1500000
2000000
2500000
3000000
3500000
4000000
4500000
5000000
0 5 10 15 20 25 30 35 40
27
Imagining Real-Time PCR
MeasuringQuantities
How can all this be used to measure DNA quantities??
0
500000
1000000
1500000
2000000
2500000
3000000
3500000
4000000
4500000
5000000
0 5 10 15 20 25 30 35 40
28
Imagining Real-Time PCR
MeasuringQuantities
Let’s imagine that you start with four times as much DNA as I do.
Picture our two tubes at cycle 25 and work backwards a few cycles.
Cycle Me You
25 1,000,000 4,000,000
24 500,000 2,000,000
23 250,000 1,000,000
Cycle 25
29
Imagining Real-Time PCR
MeasuringQuantities
So, if YOU started with FOUR times as much DNA template as I did…
…Then you’d reach 1,000,000 copies exactly TWO cycles earlier than I would!
0
500000
1000000
1500000
2000000
2500000
3000000
3500000
4000000
4500000
5000000
0 5 10 15 20 25 30 35 40
30
Imagining Real-Time PCR
MeasuringQuantities
What if YOU started with EIGHT times LESS DNA template than I did?
Cycle Me You
25 1,000,000 125,000
26 2,000,000 250,000
27 4,000,000 500,000
28 8,000,000 1,000,000
Cycle 25
31
Imagining Real-Time PCR
MeasuringQuantities
What if YOU started with EIGHT times LESS DNA template than I did?
You’d only have 125,000 copies right now at cycle 25…
And you’d reach 1,000,000 copies exactly THREE cycles later than I would!
0
500000
1000000
1500000
2000000
2500000
3000000
3500000
4000000
4500000
5000000
0 5 10 15 20 25 30 35 40
32
Imagining Real-Time PCR
MeasuringQuantities
We can easily see that the left-right shift in the curves is related to the starting quantity of DNA!
Cq (“Cycle Quantity) values identify the curve positions, based on where they cross a threshold.
DNA Quantity and Cq value are related as:
Quantity ~ 2Cq
0
500000
1000000
1500000
2000000
2500000
3000000
3500000
4000000
4500000
5000000
0 5 10 15 20 25 30 35 40
23 25 28
33
Imagining Real-Time PCR
MeasuringQuantities
We can plot the Cq value versus the Log Quantity on a graph…
20
21
22
23
24
25
26
27
28
29
30
0.1 1 10
Log Quantity
Ct
4 unitsCq=23
1 unitCq=25
0.125 unitCq=28
… and calculate the quantity of any ‘unknown’ right off of the line!!
34
Real-Time PCR
Sensitivity
How sensitive is Real-Time PCR?
Ultimately, even a single copy can be measured! In reality, typically about 100 copies is around the minimum amount.
One hundred copies of a 200-bp gene is:
• twenty attograms (2 x 10-17 g) of DNA!
• this is just 2/100ths of a microliter of blood!
Copy Number vs. Ct - Standard Curve
y = -3.3192x + 39.772
R2 = 0.9967
0
5
10
15
20
25
30
35
40
0 1 2 3 4 5 6 7 8 9 10 11
Log of copy number (10n)
Ct
35
Part 3: How do we detect and measure DNA?
36
How do We Measure DNA in a PCR Reaction?
We use reagents that fluoresce in the presence of amplified DNA!
5’3’
5’
37
Measuring DNA: Ethidium Bromide
Ethidium Bromide+ = common and well known
- = toxic, not very bright
http://www.web.virginia.edu/Heidi/chapter12/chp12.htm
38
Measuring DNA: SYBR Green I
SYBR Green I+ = Bright fluorescence!
+ = Low toxicity!
Ames test results from Molecular ProbesSinger et al., Mutat. Res. 1999, 439: 37- 47
39
Fluorescent Dyes in PCR
Intercalating Dyes
PCR makes more double-stranded DNA
SYBR Green dyebinds to dsDNA
When illuminated with light at 490nm, the SYBR+DNA complex fluoresces at 520nm.
5’ 3’
5’3’5’ 3’
5’3’
5’ 3’
5’3’5’
5’
Taq
Taq
3’
5’3’
Taq
Taq5’
5’
SYBR Green in Action!
40
Fluorescent Dyes in PCR
Other Options
Even more ways to detect PCR products:
•Other Intercalating Dyes- Eva Green
•Probes- TaqMan Probes
•Primer/Probe Combinations- Scorpions- LUX Primers
41
What Type of Instruments are used with Real-Time PCR?
What about the Instruments?
Real-time PCR systems consist of THREE main components:
1. Thermal Cycler (PCR machine), linked to a…
2. Optical Module (to detect fluorescence in the tubes during the run), linked to a…
3. Computer (to translate the fluorescence data into meaningful results).
42
What Type of Instruments are used with Real-Time PCR?
A good example is the MiniOpticon real-time instrument.
Optical ModuleThermal Cycler Base
43
What Type of Instruments are used with Real-Time PCR?
The CFX module scans the PCR plate with LEDs and records fluorescence in each well at each PCR cycle.
One more example is the Bio-Rad CFX-Touch real-time PCR instrument.
Optical ModuleThermal Cycler Base
44
What Type of Software is used with Real-Time PCR?
The computer, running real-time software, converts the fluorescent signals in each well to meaningful data.
Workflow:
1. Set up PCR protocol.
2. Set up plate layout.
3. Collect data.
4. Analyze data.
1 2 3,4
45
Part 4: What does actual real-time data look like, and what are melt curves?
46
Real-Time PCR
Actual Data
• This is some actual data from a recent real-time PCR run.
• Data like this can easily be generated by preparing a dilution series of DNA.
c366939
47
Real-Time PCR
Final Product
• The final product of real-time PCR is a table of Ct values, from which amounts of DNA can be determined.
Well Fluor ContentCycle
Quantity ( Cq )
A03 SYBR Std-1 8.90
A04 SYBR Std-2 12.20
A05 SYBR Std-3 15.34
A06 SYBR Std-4 18.77
A07 SYBR Std-5 21.84
A08 SYBR Std-6 25.24
A09 SYBR Std-7 28.82
B03 SYBR Std-1 8.85
B04 SYBR Std-2 12.12
B05 SYBR Std-3 15.31
B06 SYBR Std-4 18.69
B07 SYBR Std-5 21.76
B08 SYBR Std-6 25.24
48
Real-Time PCR
Melt Curves
• The fluorescence data collected during PCR tells us “how much” …
…. but there is another type of analysis we can do that tells us “what”!
c366939
49
Melt Curves
Basics
Melt curves can tell us what products are in a reaction.
• The principle of melt curves is that as DNA melts (becomes single stranded), DNA-binding dyes will no longer bind and fluoresce.
5’5’3’
3’ ID IDID
CO
LD
5’
5’
3’
3’ ID
ME
DIU
M
5’
5’
3’
3’
HO
T
50
Melt Curves
Basics
RFU vs Temp
5’ 5’3’3’
5’5’3’
3’
ID IDID
5’5’
3’3’ ID
• Melt curves can tell us what products are in a reaction.
• PCR products that are shorter or lower G+C will melt at lower temperatures.
• Different PCR products will therefore have different shaped curves.
51
Melt Curves
Typical Data
• For convenience, we typically view the derivative (slope) of the actual melt curve data.
• The resulting graph looks like a chromatogram, with peaks that represent different PCR products.
dRFU/dT
Slope vs. Temp
Teaching Tip:Use Melt Curves to bring up a good discussion of why different DNA sequences will “melt” at different temperatures! Talk about base-pairing, secondary structure, energy levels, etc!
52
Melt Curves
High-ResolutionAnalysis
• The new field of Precision Melt Analysis even allows differentiation between PCR products based on a single-base pair mismatch!
• PMA/HRM is now used in mutation screening, detection of biological diversity, and genetic analysis.
PCR melt data from different organisms is first collected….
Then normalized….
Then the organisms are compared against each other.
53
Part 5: How can we demonstrate real-time PCR in the classroom?
54
CSI: MATERIALS REQUIRED
• To run the CSI Kit in real-time, only a few additional items are needed…
• iQ SYBR Green Supermix and appropriate tubes/caps
• A real-time PCR instrument
Crime Scene Investigator Kitin Real-Time
55
Crime Scene Investigator Kitin Real-Time
CSI: INSTRUCTIONS
• An Application Note and a Starter Kit are available (166-2660EDU):
• The PCR reactions in the CSI kit can be run in real-time as an add-on to the regular kit.
56
Crime Scene Investigator Kitin Real-Time
CSI: FINAL RESULTS
• The Crime Scene Real-Time Extension is great for first-time users!!
• Teach PCR, Real-Time, Melt Curves, etc!
57
GMO: MATERIALS REQUIRED
• To run the GMO Kit in real-time, only two additional items are needed…
• iQ SYBR Green Supermix and appropriate tubes/caps
• A real-time PCR instrument
GMO Investigator Kitin Real-Time
58
GMO Investigator Kitin Real-Time
GMO: INSTRUCTIONS
• An Application Note and Starter Kit (166-2560EDU) are available:
• Basically, run GMO kit with real-time reagents on a real-time instrument.
59
GMO Investigator Kitin Real-Time
GMO: FINAL PRODUCT
• Ultimately, you can even calculate the percentage GMO content in actual food samples!
• The GMO Real-Time extension is perfect for more advanced users!
Food Plant Cq
GMO Cq
DeltaCq
Plant
DeltaCq
GMO
GMOPlant ddCq
Ratio2ddCt
Ratio%
100% GMO 23 27 0 0 0 1 100
Non-GMO 24 39 -1 -12 -11 0.0004 0.04
Product A 22 30 1 -3 -4 .0625 6.3
Product B 25 29 -2 -2 0 1 100
60
Getting started with teaching Real-Time PCR in the classroom is easy !
1. Use the Crime Scene Real-Time starter kit.2. Use the GMO Investigator Real-Time kit.3. Use your own PCR primers and templates
with SYBR Green Supermix.
It’s nothing more complicated than using a slightly different polymerase supermix, correct plastics, and running on a real-time instrument !
Real-Time in the ClassroomGetting Started
61
Why Real-Time in the Classroom is Cool!
Real-Time PCR in the classroom is “cool” for a number of reasons!
• Instant Results! You can see amplification within minutes of starting the PCR run. No waiting until next lab period and waiting for gels to run.
• What-Will-Happen-Next Factor! Because samples amplify at different times, many students will want to wait for “their” sample to amplify so they can see what happens!
• Demystifying the Black Box! Now students can see what happens inside the PCR machine!
• Finally a way to connect Computers and Biology! Many “computery” students get really excited to see the computer control of the instrument and data collection / analysis!
62
Conclusions We’ve covered the following topics today:
1. What is real-time PCR used for?
2. How does real-time PCR work?
3. What chemicals and instruments are used to detect DNA?
4. What does real-time data look like?
5. How can we demonstrate real-time PCR in the classroom?
63
Resources and References
• David PalmerDavid_Palmer@bio-rad.com
• Bio-Rad Technical Support1(800)4BIORADconsult.bio-rad.com
• Bio-Rad Explorer website: www.explorer.bio-rad.com
• Bio-Rad Explorer email: biotechnology_explorer@bio-rad.com
• Crime Scene Investigator PCR Basics Kit Real-Time PCR Application NoteBulletin 166-2505
• GMO Investigator Kit Real-Time PCR Application NoteBulletin 166-2605
• Real-Time PCR Applications GuideBulletin 5279
64
Real-Time PCRPractical Exercise!
65
• Today we’ll use the DNA in the Crime Scene Kit to make some dilutions for our real-time experiment!
• Each workgroup will have DNA from the Crime Scene kit that has been diluted 1:10, 1:100, 1:1000, 1:10000, or undiluted. This is your “Unknown” DNA.
• Each workgroup will prepare four real-time PCR reactions:– Unknown DNA (replicate 1)
– Unknown DNA (replicate 2)
– Unknown DNA diluted 1:100 (replicate 1)
– Unknown DNA diluted 1:100 (replicate 2)
• If all goes well, you’ll be able to tell from the Cq values:– Which unknown DNA you started with,
– How accurate your pipetting is,
– Whether your mini-dilution series demonstrates high-efficiency PCR.
Today’s Experiment:An Overview
66
• Step 1: DNA Dilutions– Dilute your “Unknown” DNA 1:100. – Mix 1 ul of your DNA (screw-cap tube labelled 1-5)
into 99 ul of water (screw-cap tube labelled “W”).• Step 2: Prepare your PCR Tubes
– Add 20 ul of the spiked SYBR Green Supermix (from the screw-cap) tube labelled SMX to four PCR tubes.
• Step 3: Add DNA to your PCR Tubes– Add 20 ul of your DNA samples to each PCR tube:
• Unknown Replicate A• Unknown Replicate B• Unknown 1:100 Replicate A• Unknown 1:100 Replicate B
– Mix gently, avoiding bubbles!– Label appropriately.
• Step 4: Cap and Load the PCR Tubes – Place the optically-clear flat caps on the tubes.– Place your reactions in the real-time PCR machine.
Today’s Experiment:Step-By-Step
67
• Our PCR protocol will look like this:• 1. 95C for 3 min (activates Taq)
• 2. 95C for 10 sec (denatures)
• 3. 52C for 30 sec (extend / anneal)
• 4. Plate read (captures fluorescence data)
• 5. Goto Step 2 for 39 more times
Today’s Experiment:PCR Protocol
68
David A. Palmer, Ph.D.Technical Support, Bio-Rad LaboratoriesAdjunct Professor, Contra Costa College
Real-Time PCR
69
BONUS: How do we optimize Real-Time PCR and troubleshoot problems?
70
• Optimization of real-time PCR reactions is important:
– Since real-time PCR calculations are based on a doubling of product every cycle, if the reaction isn’t optimized, this doubling will not occur.
Optimization
Why?
71
• A well-optimized reaction will have evenly spaced standard curves with tight replicates:
• At 100% efficiency, 10-fold serial dilutions will be spaced 3.3 cycles apart from each other.
Optimization
Example
72
• Optimization is normally done as follows:
1. Design multiple primer sets.
2. Empirically test each primer set with a standard curve.
3. Select best primer set, then run a temperature gradient experiment to determine best annealing temperature.
4. Standard curves are ideal for assessing optimization.
Optimization
Basics
73
• Why is it important for teachers to be able to solve real-time PCR problems?
•Help students have better success with their projects!
•Preventing problems at the start can help avoid lost experiments and reagents!
•Being able to explain unusual results leads to great teaching opportunities!
Trouble-shooting Skills
Why?
Teaching Tip:Very often a student’s first real-time data isn’t perfect – this makes for a great chance to teach better pipetting skillls, experimental design, etc!
74
Trouble-Shooting
• A successful real-time PCR experiment will have the following characteristics:
Replicates are tightly clustered
Baselines are relatively flat
Dilution series has expected spacing
Plateau height doesn’t matter
Melt curve has one peak per product.
Curves are all S-shaped
Curves are smooth
75
Trouble-Shooting
Replicates
• If replicates aren’t tightly clustered, suspect:– Pipetting error– Poorly optimized PCR reactions– Sample evaporation– Unknowns outside of range of detection– Instrument calibration
Replicates are tightly clustered
Replicates are not tightly clustered
76
Trouble-Shooting
Baselines
• If baselines aren’t flat, suspect:– Sample evaporation– Bubbles– Reagents not thoroughly mixed– Baseline “window” not properly set
Baselines are relatively flat
Baseline not flat
77
Trouble-Shooting
Dilutions
Dilution series has expected spacing
1000100
101
Dilution series tightly compressed
Dilution series stretched out
• If the dilution series comes out “compressed” or “stretched”, suspect:– Pipetting– Too much DNA (for your assay)– PCR inhibitors– Too little DNA (for your assay)– Poor PCR efficiency
78
Trouble-Shooting
Curve Shape
• If curves are not S-shaped, suspect:– Curves are not actual PCR products!– Sample evaporation– Fluorescence drift in unamplified samples– Something seriously wrong with assay
Curves are all S-shaped
Curves are not S-shaped
79
Trouble-Shooting
Curve Shape
• If curves are not smooth, suspect:– Poor pipetting (bubbles)– Sample evaporation– Poor assay (low fluorescence reagents)– System malfunction (line noise)
Curves are smooth
Curves are not smooth
80
Trouble-Shooting
Melt Peaks
• If melt curves have more than one peak:– More than one product– Possible normal primer-dimers– Using too low an annealing temperature– Primers need to be redesigned
Melt curve has one peak per product.
Melt curves have multiple peaks.
81
Trouble-Shooting
Common themes in troubleshooting:
Care in pipetting.
Care in choice of plastics and sealing the plates.
Care in experimental design.
Use of Positive and Negative Controls.
?
Teaching Tip:Use Real-Time PCR to teach the importance of properly designed experiments !!
82
David A. Palmer, Ph.D.Technical Support, Bio-Rad LaboratoriesAdjunct Professor, Contra Costa College
Real-Time PCR