Post on 18-Aug-2020
R&C LED Illuminate Technology Co.,Ltd Tel: +86-755-36627298 Email:info@ led-illuminate.com
Website:http://www.led-illuminate.com
Product Catalog
LED Downlight Series
LED Bulb Series
LED Light Ball Series
LED Tube Light Series
LED Grid Lamp Series
LED Shading Lamp Series
LED Flood Light Series
LED Wall Washer Light Series
LED Jewelry Counter Light Series
LED High Bay Light Series
LED Automotive Bulb
G4 led series
LED automotive lighting
LED Strip
LED Flexible Strip
LED Rigid Strip
LED Strip Power Supply
LED Strip Controller
Product Advantages:
1. Adopt American original encapsulated CREE light source with high brightness and color
rendering index, consistent color temperature, low brightness degradation and long life time over
100,000 hours;
2. Adopt imported high quality optical lens with excellent integrated design, strong light
penetration and even light distribution;
3. Unique patent technology for heat dispersion and global advanced heat dispersion material-
aviation magnesium and aluminium alloy with higher heat dispersion quotiety ;
4. Dimmable LED lamps are applied widely: they are appicable to traditional dimmer, thus can
save you more cost;
5. Adopt imported first class IC-Fairchild and TI as LED constant-current driver which can
guarantee the quality and make our LED lamp to have long life time
6. Epoxy resin is used in the driver Avoid loosing of parts inside the lamp itself, thus the driver is
shock resisted, maintenance-free and hardly damaged;
7. It is the is the main trend of the current international green light source that
LED cool light source with super-energy-saving ability and agreeable amenity but no stroboflash,
no ultraviolet radiation, no heat radiation
8. Quality assurance: R&C LED lighting products are warranted for 3 years from the original date
of purchase, aimed at the defects in material or workmanship
* This warranty is in lieu of all other warranties expressed or implied. This limited warranty
covers all defects encountered in the normal use of the product and does not cover acts of nature
such as lightning damage, nor does it cover damages caused through mishandling, alteration,
abuse, improper installation, surges in electric current, or acts of third parties. Warranty is void if
product is not used for the purpose for which this product is manufactured or for failure to follow
instructions provided by the seller in writing. This warranty does not cover costs of removing and
re-installing the product or fixture. If the Lighting Product fails for any reason covered by this
warranty, simply return it with a copy of the original sales invoice, at its option, repair the product
or, replace the product or refund the purchase price.
* The selected power source must be approved or purchased from Shenzhen R&C LED lightings
products for products to be eligible for this warranty program
Product Code Rule:
DS——LED Downlight
GS——LED Grid Lamp
LB——LED Light Ball
CL——LED Candle Light
WL——LED Wall Washer Light
FL——LED Flood Light
SD——LED Shading Lamp
BL——LED Aluminum Strip Light
JS——LED jewelry counter light
JDR——E26/E27 LED Bulb
LED type:
C——American original encapsulated CREE light source
E——Taiwan Edison LED chips
Y——Taiwan Everlight LED chips
J——Taiwan Epistar LED chips
Color Temperature:
CW——Cool white
WW——Warm white
NW——Neutral white
PW——Pure white
Input voltage:
V0——90-260V Input voltage
V1——110V Input voltage
V2——220V Input voltage
VL——12-30V Input voltage
Dimmable LED Lamp Series:
D1——110V Dimmable LED Lamp
D2——220V Dimmable LED Lamp
Color:
1——Silver
2——Black
3——Golden or Champagne
4——White
Housing Material:
A——Aluminium alloy milled pieces/Aluminium alloy bar
B——Die-casting
C——Other specifications
M——Magnesium Alloy
LED Downlight
IP Code: IP50/ClassⅡ
Color Temperature: Warm white(2700-3500K); Neutral white(3800-4800K); Cool white
(5500-6500K)
Beam Angle: 15°~120°to choose from
Color Rendering Index: Ra≥80
Connection: Terminal Connection(Install With Power Off)
Mounted places: Indoor
Applications: Automobile show room, jewelry shop, villa, shopping mall, office building, ideal
replacement for traditional fluorescent lamp and halogen lamp
Installation methods: Mounted the lamp into the ceiling or other reserved space
Warranty: 3 years
Product Characteristics:
1. American original encapsulated CREE light source,and Aluminium Alloy material;
2. high light-efficiency and long life time;
3.Brightness degradation is less than 3‰ per 1000 hour;
4. LED life time over 100,000 hours;
5. Low power consumption and high brightness;
6.Safe and environment friendly;
7. delicacy and top designed appearance;
8.Specially used for commercial indoor lighting;
9.Complied with CE, RoHS standard.
-LED Downlight(Case:DS-01A)Number Description:
Item No.:V0DS-01A1-C3W-CW
Number
Description V0 DS 01 A 1 C 3W CW
Representative
of the
meaning
Input voltage:
AC90~260V Downlight 1pc LED
Milled
pieces Silver
Cree
Chips Power :3W
Cool
white
LED Downlight
Model: DS-R09A1
LED Qty/Type: 9pcs/CREE
Power: 9W / 23W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 1620lm; Warm white 1215lm
Beam Angle: 15°~120°to choose from
Innovative design: Internal lamp can be rotated from 0~35 Degree
External dimensions: Φ135*72mm
Cut-out: Φ115mm
Housing Material: Aluminium alloy
Retrofit Instruction for Downlight
1. Fix the spring to the spring holder of the lamp. Please refer to the being assembled picture in
drawing3.Fix the spring holder( shown in drawing1) to the spring holder at the position of the
lamp(shown in drawing 2)
drawing 1 drawing 2 Drawing 3
Attention: please distinguish the two branches of the spring holder and do not install them in
reverse
2. Put the lamp with spring holder inside the hole of the ceiling and stuck the spring holder. Please
refer to drawing 4 and drawing 5.
drawing 4 drawing 5
3. Connect the wires from the lamp itself and the wires from the Driver correctly. Insulated lead is
protected by wire tube or metal hose. There shouldn’t be any nudity of the external wire with Input
Voltage 90-260V AC
4. Check the position of the spring holder and the connection part before connecting 90-260V AC.
Then the lamp can operate normally.
Attention: Do not operate the wires of the driver when power on.
5. If the weight of down light is 3KG or more, suspender must be used to fix it.
Note: Do not install or maintain when power on; Do not change its application or dismantle
without any guidance; Do not operate in humid environment; Man-made sabotage is not included
in our guarantee range.
The user manual of Downlight
Thanks for purchasing & using our LED down lights,Before installing & operating our products
please carefully read the user’s instruction, then you can enjoy the new and comfort high tech
lighting products. We attach great importance to the quality. If you have any suggestion or opinion,
please do not hesitate to contact us, or browse our website:http://www.np-led.com
LED Down Light series of “LED illumination” adopt aluminum alloy housing materialm and
American original encapsulated Cree with high light efficiency, long life span and less than
3‰brightness degradation per 1000 hours; LED lifetime is more than 100,000hours; low power
consumption, high brightness, safe to use, environment-friendly; nice appearance, specially used
in commercial indoor illumination. Compliant with CE, Rohs standard,also already obtained
appearance and function design patent.
Technical Parameters:
Input voltage: AC90-260v
IP Code: IP50/ClassⅡ (operate in Indoor, non-humid environment )
Color Temperature: Warm white(2700-3500K); Neutral white(3800-4800K); Cool
white(5500-6500K),it can be made according to customer’s requirements, it is selectable when
used in Jewelry light.
Beam Angle: 15°~120°to choose from
Connection: Terminal Connection (Install with Power Off)
Application: Jewelry showroom, shopping mall, apartment, wine shop, office building etc
Installation method: Embedded into the ceiling, or other reserved places.
Warranty: 3 years
Product Characteristics
Superior light source :Adopt original encapsulated Cree,① which have high light efficiency, low
brightness degradation, pure color
Excellent color rendering index: Adopt imported optic lens with high light transmittance, even ②
brightness, no flickering
Col③ or temperature is selectable according to customer’s requirements, wide application
High luminous flux: Comply with commercial illumination requirement; energy saving ④
capability is above 80%
Long life span: Brightness degradation is less than ⑤ 3‰ per 1000hours; LED life is more
than100, 000hours
Warm tips: The light of high power LED products is very strong; in order not to damage your
eyes. Please do not stare at the lamp for a long time.
LED Downlight
Model: DS-01A
LED Qty/Type: 1pcs/CREE
Power: 1W / 3W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 180lm; Warm white 135lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ60*25mm
Cut-out: Φ45mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-01B
LED Qty/Type: 1pcs/CREE
Power: 1W / 3W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 180lm; Warm white 135lm
Beam Angle: 15°~120°for options
External dimensions: Φ70*76mm
Cut-out: Φ60mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-03B
LED Qty/Type: 3pcs/CREE
Power: 3W / 8W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 540lm; Warm white 405lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ86*71mm
Cut-out: Φ75mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-03C
LED Qty/Type: 3pcs/CREE
Power: 3W / 8W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 540lm; Warm white 405lm
Beam Angle: 15°~120°to choose from s
External dimensions: Φ113*75mm
Cut-out: Φ105mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-05A
LED Qty/Type: 5pcs/CREE
Power: 5W / 13W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 900lm; Warm white 675lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ94*72mm
Cut-out: Φ85mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-06A
LED Qty/Type: 6pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ113*75mm
Cut-out: Φ98mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-06B
LED Qty/Type: 6pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ97*75mm
Cut-out: Φ85mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-07A
LED Qty/Type: 7pcs/CREE
Power: 7W / 18W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 1260lm; Warm white 945lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ114*62.1mm
Cut-out: Φ105mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-09A
LED Qty/Type: 9pcs/CREE
Power: 9W / 23W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 1620lm; Warm white 1215lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ130*75mm
Cut-out: Φ115mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-09C
LED Qty/Type: 9pcs/CREE
Power: 9W / 23W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 1620lm; Warm white 1215lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ130*75mm
Cut-out: Φ115mm
Housing Material: Aluminium alloy & frosted PC cover
LED Downlight
Model: DS-09A2
LED Qty/Type: 9pcs/CREE
Power: 9W / 23W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 1620lm; Warm white 1215lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ130*75mm
Cut-out: Φ115mm
Housing Material: Aluminium alloy (Black)
LED Downlight
Model: DS-12A
LED Qty/Type: 12pcs/CREE
Power: 12W / 30W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 2160lm; Warm white 1620lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ160*75mm
Cut-out: Φ150mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-15A
LED Qty/Type: 15pcs/CREE
Power: 15W / 38W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 2700lm; Warm white 2025lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ160*75mm
Cut-out: Φ150mm
Housing Material: Aluminium alloy
LED Downlight
Model: DS-15C
LED Qty/Type: 15pcs/CREE
Power: 15W / 38W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 2700lm; Warm white 2025lm
Beam Angle: 90°~120°
External dimensions: Φ160*75mm
Cut-out: Φ150mm
Housing Material: Aluminium alloy & Frosted PC cover
LED Downlight Model: DS-R03D1
LED Qty/Type: 3pcs/CREE
Power: 3W / 8W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 540lm; Warm white 405lm
Beam Angle: 15°~120°to choose from
Innovative design: Internal lamp can be rotative from 0~35 Degree
External dimensions: Φ86*56mm
Cut-out: Φ70
Housing Material: Aluminium alloy
LED Downlight Model: DS-R06A4
LED Qty/Type: 6pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
Innovative design: Internal lamp can be rotative from 0~35 Degree
External dimensions: Φ110*72mm
Cut-out: Φ98mm
Housing Material: Aluminium alloy (White)
LED Downlight Model: DS-R07A4
LED Qty/Type: 7pcs/CREE
Power: 7W / 18W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 1260lm; Warm white 945lm
Beam Angle: 15°~120°to choose from
Innovative design: Internal lamp can be rotative from 0~35 Degree
External dimensions: Φ125*60mm
Cut-out: Φ105mm
Housing Material: Aluminium alloy (White)
LED Downlight Model: DS-R09A4
LED Qty/Type: 9pcs/CREE
Power: 9W / 23W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 1620lm; Warm white 1215lm
Beam Angle: 15°~120°to choose from
Innovative design: Internal lamp can be rotative from 0~35 Degree
External dimensions: Φ135*72mm
Cut-out: Φ120mm
Housing Material: Aluminium alloy (White)
LED Downlight
Model: DS-R12A4
LED Qty/Type: 12pcs/CREE
Power: 12W / 30W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 2160lm; Warm white 1620lm
Beam Angle: 15°~120°to choose from
Innovative design: Internal lamp can be rotative from 0~35 Degree
External dimensions: Φ180*73.1mm
Cut-out: Φ150mm
Housing Material: Aluminium alloy (White)
LED Downlight Model: DS-R15A4
LED Qty/Type: 15pcs/CREE Power: 15W / 38W
Input voltage: AC90~260V (Install with Power Off)
Luminous Flux: Cool white 2700lm; Warm white 2025lm
Beam Angle: 15°~120°to choose from
Innovative design: Internal lamp can be rotative from 0~35 Degree
External dimensions: Φ158*72mm
Cut-out: Φ140mm
Housing Material: Aluminium alloy (White)
LED Bulb/Spot Light
LED Bulb series UL File Number:E335951
Material & Technics: Adopt the better heat –conduction magnesium alloy and aluminium alloy
material, and obtained the patent of appearance and structure designing.
Light Sources adopted: American original encapsulated CREE light source can bring high energy
efficiency and long lasting life span.
Mounted places: Indoor
Color Temperature: Warm white (2700-3500K); Neutral white (3800-4800K); Cool white
(5500-6500K)
Beam Angle: 15°~120°to choose from
Color Rendering Index: Ra≥80
Base Type: JDR、E11、E14、E17、E26、E27、GU10、MR11、GU5.3 bases to choose from
Applications: Shopping mall,jewlry shops meeting room, exhibition, residential lighting,
entertainment place, landscape, and engineering projects
Installation methods: Mounted the lamp into the ceiling; added holders or tracks can be used as
shading lamps; added suspender and steel cable can be used as pendant lamp
Warranty: 3 years
Product Characteristics:
1. Energy Efficient –consuming less energy and reducing lighting costs.
2. Energy Efficient –consuming less energy and operating at significantly lower running costs
3. Improved Comfort – Less heat translates into a colder, more comfortable retail environment for
your customers.
4. Low heat-Cold light source, no UV, no heat radiation;
5. Environmentally Responsible –consuming less energy than standard incandescent and
fluorescent bulbs and producing less fewer CO2 emissions. Also no hazardous substances lead and
mercury.
6. Aviation Magnesium Alloy and Aluminium Alloy--Harder texture, lighter weight, and better
heat dispersion;
7. Dimmability- LEDs can very easily be dimmed either by Pulse-width modulation or lowering
the forward current.
8. Novel appearance design; Safe and easy to install.
NPL-LED Bulb/Spot Light(Case:GU10-M3B1) Number Description:
Item No.: D1GU10-M3B1-C3W-WW
Number
Description D 1 GU10 M 3 B 1 C 3W WW
Representative
of the
meaning
Dimmable 110V Base Magnesium
Alloy
3pcs
LED Die-casting Silver
CREE
Chips Power:3W
Warm
white
GU10 Bulb/Spot Light
Model: GU10-M1B1
LED Qty/Type: 1pc/CREE
Power: 1W / 3W
Input voltage: AC90~260V
Luminous Flux: Cool white 160lm; Warm white 130lm
External dimensions: Φ50*60.1mm
Housing Material: Magnesium Alloy
Base Type: GU10
GU10 Bulb/Spot Light
Model: GU10-M1C1
LED Qty/Type: 1pc/CREE
Power: 1W / 3W
Input voltage: AC90~260V
Luminous Flux: Cool white 160lm; Warm white 130lm
External dimensions: Φ50*60.1mm
Housing Material: Magnesium Alloy
Base Type: GU10
GU10 Bulb/Spot Light
Model: GU10-H3A1
LED Qty/Type: 3pcs/CREE
Power: 8W
Input voltage: AC90~260V
Luminous Flux: Cool white 370lm; Warm white 300lm
External dimensions: Φ49.5*90mm
Housing Material: Aluminium alloy
Base Type: GU10
UL Certification No.: E335951
GU10 Bulb/Spot Light
Model: GU10-M3B1
LED Qty/Type: 3pcs/CREE
Power: 3W / 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 370lm; Warm white 300lm
External dimensions: Φ50*60.1mm
Housing Material: Magnesium Alloy
Base Type: GU10
UL Certification No.: E335951
GU10 Bulb/Spot Light
Model: GU10-M3B2
LED Qty/Type: 3pcs/CREE
Power: 3W / 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 370lm; Warm white 300lm
External dimensions: Φ50*60.1mm
Housing Material: Magnesium Alloy (Black)
Base Type: GU10
UL Certification No.: E335951
E27 Bulb/Spot Light
Model: JDR-M1B2
LED Qty/Type: 1pc/CREE
Power: 1W / 3W
Input voltage: AC90~260V
Luminous Flux: Cool white 160lm; Warm white 130lm
External dimensions: Φ50*77.1mm
Housing Material: Magnesium Alloy
Base Type: E26/E27 (Black)
E27 Bulb/Spot Light
Model: JDR-M1C1
LED Qty/Type: 1pc/CREE
Power: 1W / 3W
Input voltage: AC90~260V
Luminous Flux: Cool white 160lm; Warm white 130lm
External dimensions: Φ50*77.1mm
Housing Material: Magnesium Alloy
Base Type: E26/E27
E27 Bulb/Spot Light
Model: JDR-M3B1
LED Qty/Type: 3pcs/CREE
Power: 3W / 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 370lm; Warm white 300lm
External dimensions: Φ50*77.1mm
Housing Material: Magnesium Alloy
Base Type: E26/E27
E14 Bulb/Spot Light
Model: E14-M3B1
LED Qty/Type: 3pcs/CREE
Power: 3W / 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 370lm; Warm white 300lm
External dimensions: Φ50*77.1mm
Housing Material: Magnesium Alloy
Base Type: E14
MR11 Bulb/Spot Light
Model: MR11-1A
LED Qty/Type: 1pc/CREE
Power: 1W / 3W
Input voltage: AC/DC12V
Warning: Do not use the high-frequency transformer which designs for the halogen lamp
Luminous Flux: Cool white 135lm; Warm white 110lm
External dimensions: Φ35*49.3mm
Housing Material: Aluminium alloy
Base Type: MR11
MR11 lamp cup/ spotlight Model: MR11-1A1-C3W LED type: 1 pcs/ CREE XP-E original packed optical source Input Power:3W Input Volt: AC/DC 12V Luminous Flux:CW 100lm; WW 70lm Color Rendering Index:Ra≥80 Beam Angle: 10°,25°,40°,60° operating temperature:-10°~45° Overall dimension: Φ34.5*45mm
MR16 Bulb/Spot Light
Model: MR16-M1B1
LED Qty/Type: 1pc/CREE
Power: 1W / 3W
Input voltage: AC/DC12V
Warning: Do not use the high-frequency transformer which designs for the halogen lamp
Luminous Flux: Cool white 135lm; Warm white 110lm
External dimensions: Φ50*50mm
Housing Material: Magnesium Alloy
Base Type: GU5.3
MR16 Bulb/Spot Light
Model: MR16-M1C1
LED Qty/Type: 1pc/CREE
Power: 1W / 3W
Input voltage: AC/DC12V
Warning: Do not use the high-frequency transformer which designs for the halogen lamp
Luminous Flux: Cool white 135lm; Warm white 110lm
External dimensions: Φ50*50mm
Housing Material: Magnesium Alloy
Base Type: GU5.3
MR16 Bulb/Spot Light
Model: MR16-M3B1
LED Qty/Type: 3pcs/CREE
Power: 3W / 5W
Input voltage: AC/DC12V
Warning: Do not use the high-frequency transformer which designs for the halogen lamp
Luminous Flux: Cool white 370lm; Warm white 300lm
External dimensions: Φ50*50mm
Housing Material: Magnesium Alloy
Base Type: GU5.3
MR16 Bulb/Spot Light
Model: MR16-M3B2
LED Qty/Type: 3pcs/CREE
Power: 3W / 5W
Input voltage: AC/DC12V
Warning: Do not use the high-frequency transformer which designs for the halogen lamp
Luminous Flux: Cool white 370lm; Warm white 300lm
External dimensions: Φ50*50mm
Housing Material: Magnesium Alloy (Black)
Base Type: GU5.3
MR16 lamp cup/spotlight(section bar) Model: MR16-3A1-C3W/5W LED type: 3 pcs/ CREE XPE original packed optical source Input power: 3W/5W Input volt: AC/DC 12V Luminous Flux:CW 240lm; WW 200lm(3W parameter values)
CW 330 lm WW 260lm( 5W parameter values)) Beam Angle: 25°、40°、60° Overall dimension: Φ50*48.5mm
Lamp body material: aluminum alloy extrusions Adaptive Connector: GU5.3
GU10 lamp cup/ spotlight(section bar) Model: GU10-3A1-C3W/5W LED Type:3 pcs/ CREE XPE original packed optical source Input power: 3W/5W
Input Volt: AC90-260V
Luminous Flux:CW 240lm; WW 200lm(3W parameter values) CW 330 lm WW 260lm( 5W parameter values))
Beam Angle: 25°、40°、60° Overall dimension: Φ50*58mm Lamp body material: aluminum alloy extrusions Adaptive Connector: GU10
JDR lamp cup/ spotlight(section bar) Model: GU10-3A1-C3W/5W LED type: 3 pcs/ CREE XPE original packed optical source Input power: 3W/5W
Input Volt: AC90-260V
Luminous Flux:CW 240lm; WW 200lm(3W parameter values) CW 330 lm WW:269lm(5W parameter values)
Beam Angle: 25°、40°、60° Overall dimension: Φ50*61.5mm/64.5mm/70.5mm/72.5mm Lamp body material: aluminum alloy extrusions Adaptive Connector: E11/E12/E14/E17
MR16 lamp cup/ spotlight(section bar) Model: MR16-1A1-C3W LED type: 1 pcs/ CREE XPE original packed optical source Input Power:3W Input Volt: AC/DC 12V Luminous Flux: CW 150lm; WW 130lm Beam Angle: 30° Overall dimension: Φ50*53mm Lamp body material: aluminum alloy extrusions Adaptive Connector: GU5.3
GU10 lamp cup/ spotlight(section bar) Model: GU10-1A1-C3W LED type: 1 pcs/ CREE XPE original packed optical source Input Power:3W Input Volt: AC90-260V
Luminous Flux:CW 150lm; WW 130lm Beam Angle: 30° Overall dimension: Φ50*63mm
Lamp body material: aluminum alloy extrusions Adaptive Connector: GU10
JDR lamp cup/ spotlight(section bar) Model: JDR-1A1-C3W LED type: 1 pcs/ CREE XPE original packed optical source Input Power:3W
Input Volt: AC90-260V
Luminous Flux:CW 150lm; WW 130lm Beam Angle: 30° Overall dimension: Φ50*67mm/70mm/75.5mm/77.5mm
Lamp body material: aluminum alloy extrusions Adaptive Connector: E11/E12/E14/E17
PAR20 Bulb/Spot Light
Model: PAR20-3B1
LED Qty/Type: 3pcs/CREE
Power: 3W / 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 385lm; Warm white 310lm
External dimensions: Φ61.5*88mm
Housing Material: Aluminium alloy
Base Type: E26/E27
PAR20 Bulb/Spot Light
Model: PAR20-3B2
LED Qty/Type: 3pcs/CREE
Power: 3W / 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 385lm; Warm white 310lm
External dimensions: Φ61.5*88mm
Housing Material: Aluminium alloy (Black)
Base Type: E26/E27
PAR30 Bulb/Spot Light
Model: PAR30-5A1
LED Qty/Type: 5pcs/CREE
Power: 5W / 8W
Input voltage: AC90~260V
Luminous Flux: Cool white 615lm; Warm white 500lm
External dimensions: Φ95*95mm
Housing Material: Aluminium alloy
Base Type: E26/E27
UL Certification No.: E335951
PAR30 Bulb/Spot Light
Model: PAR30-5B1
LED Qty/Type: 5pcs/CREE
Power: 5W / 8W
Input voltage: AC90~260V
Luminous Flux: Cool white 615lm; Warm white 500lm
External dimensions: Φ94*95.7mm
Housing Material: Aluminium alloy
Base Type: E26/E27
PAR30 Bulb/Spot Light
Model: PAR30-5C1
LED Qty/Type: 5pcs/CREE
Power: 5W / 7W
Input voltage: AC90~260V
Luminous Flux: Cool white 615lm; Warm white 500lm
External dimensions: Φ95*85mm
Housing Material: Aluminium alloy
Base Type: E26/E27
PAR30 Bulb/Spot Light
Model: PAR30-7A1
LED Qty/Type: 7pcs/CREE
Power: 7W / 11W
Input voltage: AC90~260V
Luminous Flux: Cool white 860lm; Warm white 700lm
External dimensions: Φ95*95mm
Housing Material: Aluminium alloy
Base Type: E26/E27
UL Certification No.: E335951
PAR30 Bulb/Spot Light
Model: PAR30-7B1
LED Qty/Type: 7pcs/CREE
Power: 7W / 11W
Input voltage: AC90~260V
Luminous Flux: Cool white 860lm; Warm white 700lm
External dimensions: Φ94*95.7mm
Housing Material: Aluminium alloy
Base Type: E26/E27
PAR30 Bulb/Spot Light
Model: PAR30-7C1
LED Qty/Type: 7pcs/CREE
Power: 7W / 11W
Input voltage: AC90~260V
Luminous Flux: Cool white 860lm; Warm white 700lm
External dimensions: Φ95*85mm
Housing Material: Aluminium alloy
Base Type: E26/E27
PAR38 Bulb/Spot Light
Model: PAR30-8A1F
LED Qty/Type: 8pcs/CREE
Power: 8W / 12W
Input voltage: AC90~260V
Luminous Flux: Cool white 1000lm; Warm white 760lm
External dimensions: Φ122*129.6mm
Housing Material: Aluminium alloy
Base Type: E26/E27
UL Certification No.: E335951
PAR38 Bulb/Spot Light
Model: PAR38-9A1
LED Qty/Type: 9pcs/CREE
Power: 9W / 14W
Input voltage: AC90~260V
Luminous Flux: Cool white 1100lm; Warm white 900lm
External dimensions: Φ122*129.6mm
Housing Material: Aluminium alloy
Base Type: E26/E27
UL Certification No.: E335951
PAR38 Bulb/Spot Light
Model: PAR38-9B1
LED Qty/Type: 9pcs/CREE
Power: 9W / 14W
Input voltage: AC90~260V
Luminous Flux: Cool white 1100lm; Warm white 900lm
External dimensions: Φ122*120.5mm
Housing Material: Aluminium alloy
Base Type: E26/E27
UL Certification No.: E335951
PAR38 Bulb/Spot Light
Model: PAR38-12A1
LED Qty/Type: 12pcs/CREE
Power: 12W / 18W
Input voltage: AC90~260V
Luminous Flux: Cool white 1480lm; Warm white 1200lm
External dimensions: Φ122*129.6mm
Housing Material: Aluminium alloy
Base Type: E26/E27
UL Certification No.: E335951
PAR38 Bulb/Spot Light
Model: PAR38-12B1
LED Qty/Type: 12pcs/CREE
Power: 12W / 18W
Input voltage: AC90~260V
Luminous Flux: Cool white 1480lm; Warm white 1200lm
External dimensions: Φ122*129.5mm
Housing Material: Aluminium alloy
Base Type: E26/E27
UL Certification No.: E335951
PAR38 Bulb/Spot Light
Model: PAR38-12B2
LED Qty/Type: 12pcs/CREE
Power: 12W / 18W
Input voltage: AC90~260V
Luminous Flux: Cool white 1480lm; Warm white 1200lm
External dimensions: Φ122*129.5mm
Housing Material: Aluminium alloy (Black)
Base Type: E26/E27
UL Certification No.: E335951
PAR38 Bulb/Spot Light
Model: PAR38-12B4
LED Qty/Type: 12pcs/CREE
Power: 12W / 18W
Input voltage: AC90~260V
Luminous Flux: Cool white 1480lm; Warm white 1200lm
External dimensions: Φ122*129.5mm
Housing Material: Aluminium alloy (White)
Base Type: E26/E27
PAR38 Bulb/Spot Light
Model: PAR38-12B4F
LED Qty/Type: 12pcs/CREE
Power: 12W / 18W
Input voltage: AC90~260V
Luminous Flux: Cool white 1480lm; Warm white 1200lm
External dimensions: Φ122*120.5mm
Housing Material: Aluminium alloy (White)
Base Type: E26/E27
LED Grid Lamp
LED Grid Lamps adopt hard texture Aluminium Alloy. Its appearance and heat dispersion design
are better than other similar products in the market. It is not easy to be bended, and solid enough to
use. Circuit design is stable and reliable. Appearance of the output opening and end plug of the
lamp have been processed specially so that it can be used in a more complicated environment and
also it can creat many lighting effects according to customers’ actual situation.
IP Code: IP50/ClassⅡ
Color Temperature: Warm white(2700-3500K); Neutral white(3800-4800K); Cool
white(5500-6500K)
Beam Angle: 15°~120°to choose from
Color Rendering Index: Ra≥80
Connection: Terminal Connection
Mounted places: Indoor
Color: Silver Frame & Silver Ring, White Frame&White Ring, Silver Frame & Black Ring, White
Frame & Black Ring
Installation methods: Mounted the lamp into the ceiling or other reserved space; also can be fixed
directly by holder; easy and flexible to install
Applications: Automobile show room, watches and clock shop, top grade cloth shops, hotels,
office building, ideal replacement for traditional iodine-tungsten lamps and halogen lamps
Warranty: 3 years
NPL-LED Grid Lamp(Case:GS-1P03B) Number Description:
Item No.: V0 GS-1P06A12-C6W-WW
Number
Description
V0 GS 1P 06 A 12 C 6W WW
Representative
of the
meaning
Input
voltage:
AC90~260V Grid
Lamp
1pc Grid
Lamp
6pcs
LED
Milled
pieces
Silver
Frame
&
Black
Ring
CREE
Chips Power:6W
Warm
white
LED Grid Lamp
Model: GS-2P18A
LED Qty/Type: 18pcs/CREE
Power: 18W / 45W
Input voltage: AC90~260V
Luminous Flux: Cool white 2520lm; Warm white 1890lm
Beam Angle: 15°~120°to choose from
External dimensions: 333*185*125.6mm
Cut-out: 305*155 mm
Housing Material: Aluminium alloy (White Frame & Black Ring)
Retrofit Instruction for LED Grid lamp
Fix the spring holder to the spring holder of the lamp. Please refer to the being assembled picture
in drawing3.Fix the spring (shown in drawing1) to the spring holder at the position of the lamp
(shown in drawing 2)
drawing 1 drawing 2 drawing 3
Attention: please distinguish the two branches of the spring holder and do not install them in
reverse.
1. Put the lamp with spring holder inside the hole of the ceiling and stuck the spring holder.
Please refer to drawing 4 &5.
drawing 4 drawing 5
3. Connect the wires from the lamp itself and the wires from the Driver correctly. Insulated lead
is protected by wire tube or metal hose. There shouldn’t be any nudity of the external wire with
Input Voltage 90-260V AC
4. Check the position of the spring holder and the connection part before connecting 90-260V AC.
Then the lamp can operate normally.
Attention: Do not operate the wires of the driver when power on.
5 If the weight of down light is 3KG or more, suspender must be used to fix it
Note: Do not install or maintain when power on; do not change its application or dismantle
without any guidance; do not operate in humid environment; man-made sabotage is not included
in our guarantee range.
The user manual of Grid lamp
Thanks for purchasing & using our LED Grid lamp. Before installing & operating our
products please carefully read the user’s instruction, then you can enjoy the comfort which comes
from the new lighting and high tech products. We attach great importance to the quality. If you
have any suggestion or opinion, please do not hesitate to contact us, or browse our
website:http://www.np-led.com
LED Grid lamps series of LED illumination” adopt the high-strength aluminum alloy material.
Its appearance and structure are scientifically and reasonably designed, installation is simple,
sturdy and durable to use; it is suitable for complex environment and the illumination effect can be
customized according to the customer’s request. The products, complied with CE, ROHS and
other international quality and environmental certification standards, also have the function and
appearance design patents.
Technical Parameters:
Input voltage: AC90-260v
IP Code: IP50/ClassⅡ (operate in Indoor, non-humid environment )
Color Temperature: Warm white(2700-3500K); Neutral white(3800-4800K); Cool
white(5500-6500K),can be made according to customer’s requirements, it is selectable when used
in Jewelry light.
Beam Angle: 15°~120°to choose from
Connection: Terminal Connection (Install with Power Off)
Application: Jewelry showroom, shopping mall, apartment, wine shop, office building etc
Installation method: Embedded into the ceiling, or other reserved places.
Warranty: 3 years
Product Characteristics
①Superior light source :Adopt original encapsulated Cree, high light efficiency, low brightness
degradation, pure color
②Excellent color rendering index: Adopt imported optic lens with high light transmittance, even
brightness and no flickering
③Color temperature is selectable according to customer’s requirements, wide application
④High luminous flux: Comply with commercial illumination requirement; energy saving
capability is above 80%
⑤Long life span: Brightness degradation is less than 3‰ per 1000hours; LED life is more
than100, 000hours
Warm tips: The light of high power LED products is very strong; in order not to damage your eyes.
Please do not stare at the lamp for a long time
LED Grid Lamp
Model: GS-1P03B
LED Qty/Type: 3pcs/CREE
Power: 3W / 8W
Input voltage: AC90~260V
Luminous Flux: Cool white 540lm; Warm white 405lm
Beam Angle: 15°~120°to choose from
External dimensions: 185*185*126mm
Cut-out: 155*155mm
Housing Material: Aluminium alloy
LED Grid Lamp
Model: GS-1P06A
LED Qty/Type: 6pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
External dimensions: 185*185*126mm
Cut-out: 155*155 mm
Housing Material: Aluminium alloy
LED Grid Lamp
Model: GS-1P07A
LED Qty/Type: 7pcs/CREE
Power: 7W / 18W
Input voltage: AC90~260V
Luminous Flux: Cool white 1260lm; Warm white 945lm
Beam Angle: 15°~120°to choose from
External dimensions: 185*185*126mm
Cut-out: 155*155 mm
Housing Material: Aluminium alloy
LED Grid Lamp
Model: GS-2P06B
LED Qty/Type: 6pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
External dimensions: 333*185*125.6mm
Cut-out: 305*155 mm
Housing Material: Aluminium alloy
LED Grid Lamp
Model: GS-2P12A
LED Qty/Type: 6pcs/CREE
Power: 12W / 30W
Input voltage: AC90~260V
Luminous Flux: Cool white 2160lm; Warm white 1620lm
Beam Angle: 15°~120°to choose from
External dimensions: 333*185*125.6mm
Cut-out: 305*155 mm
Housing Material: Aluminium alloy
LED Grid Lamp
Model: GS-2P14A
LED Qty/Type: 14pcs/CREE
Power: 14W / 35W
Input voltage: AC90~260V
Luminous Flux: Cool white 2520lm; Warm white 1890lm
Beam Angle: 15°~120°to choose from
External dimensions: 333*185*125.6mm
Cut-out: 305*155 mm
Housing Material: Aluminium alloy
LED Grid Lamp
Model: GS-3P09B
LED Qty/Type: 9pcs/CREE
Power: 9W / 23W
Input voltage: AC90~260V
Luminous Flux: Cool white 1620lm; Warm white 1215lm
Beam Angle: 15°~120°to choose from
External dimensions: 484*185*125.6mm
Cut-out: 450*155mm
Housing Material: Aluminium alloy
LED Grid Lamp
Model: GS-3P18A
LED Qty/Type: 18pcs/CREE
Power: 18W / 45W
Input voltage: AC90~260V
Luminous Flux: Cool white 3240lm; Warm white 2430lm
Beam Angle: 15°~120°to choose from
External dimensions: 484*185*125.6mm
Cut-out: 450*155mm
Housing Material: Aluminium alloy
LED Light Ball
Light Sources adopted: American original encapsulated CREE light source can bring high energy
efficiency and long lasting life span.
IP Code: IP50/ClassⅡ
Mounted places: Indoor
Color Temperature: Warm white (2700-3500K); Neutral white (3800-4800K); Cool white
(5500-6500K)
Beam Angle: 15°~120°to choose from
Color Rendering Index: Ra≥80
Base Type: E11、E14、E17、E26、E27 bases for option
Applications: Shopping mall,jewlry shops meeting room, exhibition, residential lighting,
entertainment place, landscape, and engineering projects
Installation methods: Mounted the lamp into the ceiling; added holders or tracks can be used as
shading lamps; added suspender and steel cable can be used as pendant lamp
Warranty: 3 years
Product Characteristics:
1. LED light distribution technology changes the spot lamp-house into surface lamp-house which
can enlarge the light-emitting surface, eliminate glare, improve visual effects, and eliminate visual
fatigue.
2. Systematic design of lens and lamp cover. The protective and concentration lens can avoid light
losing to makes the lamp more concise and beautiful.
3. guarantee The ball light has good heat dissipation and long and life time just because of
High-power LED flat cluster package, systematic design of radiator and lamp holder, meanwhite it
meet any design of the structure and shape fundamentally .
4. significant energy saving. Super and bright LED light source with high power, high efficiency
power supply can save energy more than 80% compared with traditional incandescent lamp. It is
10 times as bright as the same power incandescent lamps.
5. Superior & Reliable USA original Cree as light source, LED life time is above
300,000hrs,which is 10 times more than traditional incandescent light, energy-saving as high as
80%.
6. No twinkle, soft & pure light, which eliminate eyes-discomfort caused by traditional light
source, and is the protection of human eyesight and physical health. No ultraviolet (UV) and
infrared (IR) radiation. not lead, mercury and other pollution elements, is environment-friendly
semiconductor light source.
7. luminous efficiency is up to 160 lm / 350mA, various color temperature are available , high
color rendering index and color rendering are good .
8. Strong resistances, resistance to lighting interference, no filament and glass case, there is no
fragmentation of the traditional lamp problem, so no human body accident will happen.
9. Wide voltage, it can be commonly-used in the world,90V ~ 260V AC full voltage range
constant current, which ensure the life and protect brightness from voltage fluctuations.
10. independent development and production of permanent current drive, high efficiency, low
calorie, high precision of permanent current.
11. reducing the loss of the wiring , pollution-free power grid. Power factor ≥ 0.9, THD ≤ 20%,
EMI meet global standard to reduce the power supply line power loss and to avoid pollution of the
high frequency interference.
12. Common standard lamp base can replace existing halogen, incandescent, fluorescent lamp
directly.
LED Candle Light
Model: CL-03A-E14
LED Qty/Type: 3pcs/CREE
Power: 3W
Input voltage: AC90~260V
Luminous Flux: Cool white 270lm; Warm white 220lm
External dimensions: Φ43*134mm
Housing Material: Aluminium alloy & Frosted PC cover
LED Light Ball
Model: LB-Q5C
LED Qty/Type: 5pcs/CREE
Power: 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 450lm; Warm white 360lm
External dimensions: Φ60*105.5mm
Housing Material: Aluminium alloy & Frosted PC cover
LED Light Ball
Model: LB-Q5B
LED Qty/Type: 5pcs/CREE
Power: 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 665lm; Warm white 540lm
External dimensions: Φ64.6*102.1mm
Housing Material: Aluminium alloy & Frosted PC cover
LED Light Ball
Model: LB-Q3F
LED Qty/Type: 3pcs/CREE
Power: 4W
Input voltage: AC90~260V
Luminous Flux: Cool white 285lm; Warm white 239lm
External dimensions: Φ60*109mm
Housing Material: Aluminium alloy & Frosted PC cover
LED Light Ball
Model: LB-Q4F
LED Qty/Type: 4pcs/CREE
Power: 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 380lm; Warm white 310lm
External dimensions: Φ60*109mm
Housing Material: Aluminium alloy & Frosted PC cover
LED Light Ball
Model: LB-Q5F
LED Qty/Type: 5pcs/CREE
Power: 6W
Input voltage: AC90~260V
Luminous Flux: Cool white 475lm; Warm white 385lm
External dimensions: Φ60*114mm
Housing Material: Aluminium alloy & Frosted PC cover
LED Light Ball
Model: LB-Q6F
LED Qty/Type: 6pcs/CREE
Power: 7W
Input voltage: AC90~260V
Luminous Flux: Cool white 570lm; Warm white 460lm
External dimensions: Φ60*114mm
Housing Material: Aluminium alloy & Frosted PC cover
LED Light Ball
Model: LB-Q7F
LED Qty/Type: 7pcs/CREE
Power: 8W
Input voltage: AC90~260V
Luminous Flux: Cool white 665lm; Warm white 535lm
External dimensions: Φ60*124mm
Housing Material: Aluminium alloy & Frosted PC cover
(因散热问题,去掉此款,改上 H款)
LED Light Ball
Model: LB-Q8F
LED Qty/Type: 8pcs/CREE
Power: 9W
Input voltage: AC90~260V
Luminous Flux: Cool white 760lm; Warm white 610lm
External dimensions: Φ60*124mm
Housing Material: Aluminium alloy & Frosted PC cover
(因散热问题,去掉此款,改上 H款)
LED Light Ball
Model: LB-Q3D
LED Qty/Type: 3pcs/CREE
Power: 3W / 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 360lm; Warm white 300lm
External dimensions: Φ60*124mm
Housing Material: Aluminium alloy & Frosted PC cover
LED Light Ball
Model: LB-Q4D
LED Qty/Type: 4pcs/CREE
Power: 5W
Input voltage: AC90~260V
Luminous Flux: Cool white 475lm; Warm white 385lm
External dimensions: Φ64.6*102.1mm
Housing Material: Aluminium alloy & Frosted PC cover
LED Bulb
Model:LB-Q10K-12W
LED type: 10 pcs/ CREE MX6 original packed optical source Input Power:12W Input Volt: AC90-260V Luminous Flux:CW 522lm; WW 480lm Beam Angle: 140° Overall dimension: Φ70*158mm Lamp body material: aluminum alloy &frosted& pc cover Adaptive Connector: E26/E27
LED type: 6 pcs/ CREE MXL original packed optical source Input Power:6W Input Volt: AC90-260V Luminous Flux:CW 330lm; WW 260lm Beam Angle: 140° Overall dimension: Φ60.5*111mm Lamp body material: aluminum alloy & frosted & pc cover Adaptive Connector: E26/E27
LED Tube Light
T8 tube light series UL File Number: E337911
Material & Technics: Adopting high quality Aluminium Alloy and Aluminium Substrate as heat
dispersion material to guarantee the stability, high efficiency of LED and effective reducing its
brightness degradation in the process of application.
Light Sources adopted: Everlight 3528 LED as light source can make sure that they are energy
efficient, sustainable, long lasting life time.
IP Code: IP50/ClassⅡ
Mounted places: Indoor
Color Temperature: Warm white(2800-3200K); Neutral white(3800-4200K); Pure
white(5000~5500K); Cool white(6000-6500K)
Color Rendering Index: Ra≥80
Light distribution types: Aluminiun Alloy & PC Cover
Applications: Residential house, school, office building, shopping mall, subway and factory
Four wires input: Connect any two of the four terminals in the tube socket into 90~290V AC
circuit and install the LED tube, then it can operate normally.
Installation methods: It is much easier to install, remove and maintain by adopting new pattern
plastic connectors. Remove the starter and ballast and replace the fluorescent lamp with LED tube
light. 90~290V AC voltages can be connected to the two terminals of the tube directly.
Base Type: Special rotative plug (adjustable connector at both side can be circumvolved from 0 to
180 degrees)/ Conventional fixed plug for options
Warranty: 3 years
Product Characteristics:
• Cuts Energy Consumption Significantly
• Reduces Maintenance Costs
• Lights More Evenly
• No Cold Startup
Benefits:
• Significant Energy and Maintenance cost savings.
• Improved illumination of products
• Reduced Heat
• No glass breakage
• No UV light
• Environmentally friendly - No Mercury!
LED Tube Light(Case:T8-L06A1F) Number Description:
Item No.: V0T8-L06A1F-Y8W-PW
Number
Description V0 T8 L 06 A 1 F Y 8W PW
Representative
of the
meaning
Input
voltage:
AC90~260V
Tube
Light
model
Length 0.6m Milled
pieces Silver
Frosted
PC
cover
Everlight
LED
chips
Power:8W Pure
white
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
“THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.”
- Risk of fire or electric shock. The electrical rating of these products are 90-290 Vac, the installer
must determine whether they have 90-290V at the luminaire before installation.
- Risk of fire or electric shock. Reflector kit installation requires knowledge of fluorescent lighting
luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified
electrician.
- Risk of fire or electric shock. Install this kit only in the luminaires that has the construction
features and dimensions shown in the photographs and/or drawings.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other
sharp objects.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit
installation.
THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A FLUORESCENT
RECESSED LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE
DETERMINED BY CSA OR AUTHORITIES HAVING JURISDICTION.
For use only with UL and C-UL Listed Surface or type IC or Non-IC Recessed Mount Fluorescent
Luminaires with or without Diffuser.
The end retrofit luminaries have been modified and can no longer operate the originally intended
lamp.
Suitable for dry and damp locations.
Has been evaluated for use with ceiling fixtures and suitable for use in totally enclosed recessed
fixture.
Do not use with dimmers.
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
LED Tube retrofit Installation Instruction
The product should contain: LED Tube (1pc), Label (1pc), and installation instruction (1pc).
Electrical Rating: 90-290 V, 50/60 Hz
Before retrofit please confirm the existed fluorescent luminarie size is larger than defined
dimension as below.
Model
Minimum Luminaire dimension: Length X Width (mm) Input
Wattage
(W)
No.
of
LED
Tube
Length
(mm) Fit one lamp
Fit two
lamps
Fit three
lamps
Fit four
lamps
NPL-V3L06 622x145 622x280 622x420 622x550 8.5 144 600
NPL-V3L12 1222x145 1222x280 1222x420 1222x550 13-18 288 1200
1. DANGER - RISK OF SHOCK-DISCONNECT POWER BEFORE INSTALLATION.
2. To replace fluorescent light tube with LED light tube, the wiring must be retrofit according
to instruction.
3. To ensure a complete and safe installation of LED light tube, please strictly follows following
installation guideline.
Inductive ballast type
Electronic ballast type
For more than one tube
a: Turn off the power to the light fixture at the breaker panel before installation.
b: Open the diffuser from the light fixture.
c: Remove the fluorescent tubes. Please dispose of these items properly as they contain
mercury.
d: Open the wiring cover to expose the fluorescent ballast.
e: Cut the wires shown as the diagram below. Don’t remove Starter and Ballast, they must be
retained in place.
Inductive ballast type
Electronic ballast type
For more than one tube
f: Make the new wire connect to branch circuit shown as the diagram below.
LED lamp pins are at one end, and the other end is not connected to any electrical power and it
serves as means of mechanical support only.
Inductive ballast type
Electronic ballast type
For more than one tube
g: Replace the cover over the wiring channel.
h: IMPORTANT: Install the label provided that states " Notice: This luminaire has been
modified and no longer operates Fluorescent Lamps. Use Models NPL-V3L06 / NPL-V3L12
LED self-ballasted lamps for lamp replacement. ", inside the fixture in an easily visible
location to anyone changing lamps, possibly on the cover over the wiring channel.
i: Install the LED tubes, close the diffuser.
j: After all LED Tube retrofit is completed, restore the power at the circuit breaker and turn the
lights on.
LED Tube Light
Model: T8-L06A1F-Y8W
LED Qty/Type: 144pcs/Everlight 3528LED
Power: 8W
Input voltage: AC90~290V
Luminous Flux: Neutral white 865lm
External dimensions: Φ30 *588mm
Housing Material: Aluminium alloy & Frosted PC cover
UL Certification No.: E337911 E335951
LED Tube Light
Model: T8-L09A1F-Y12W
LED Qty/Type: 216pcs/Everlight 3528LED
Power: 12W
Input voltage: AC90~290V
Luminous Flux: Neutral white 1290lm
External dimensions: Φ30 *898mm
Housing Material: Aluminium alloy & Frosted PC cover
UL Certification No.: E337911 E335951
LED Tube Light
Model: T8-L12A1F-Y18W
LED Qty/Type: 288pcs/Everlight 3528LED
Power: 18W
Input voltage: AC90~260V
Luminous Flux: Neutral white 1720lm
External dimensions: Φ30 *1198mm
Housing Material: Aluminium alloy & Frosted PC cover
UL Certification No.: E337911 E335951
LED Tube Light
Model: T8-L12A1F-Y23W
LED Qty/Type: 348pcs/Everlight 3528LED
Power: 18W
Input voltage: AC90~260V
Luminous Flux: Neutral white 2100lm
External dimensions: Φ30 *1198mm
Housing Material: Aluminium alloy & Frosted PC cover
UL Certification No.: E337911 E335951
LED Tube Light
Model: T8-L15A1F-Y24W
LED Qty/Type: 360pcs/Everlight 3528LED
Power: 24W
Input voltage: AC90~290V
Luminous Flux: Neutral white 2160lm
External dimensions: Φ30 *1498mm
Housing Material: Aluminium alloy & Frosted PC cover
UL Certification No.: E337911 E335951
LED Tube Light
Model: T8-L18A1F-Y28W
LED Qty/Type: 432pcs/Everlight 3528LED
Power: 28W
Input voltage: AC90~290V
Luminous Flux: Neutral white 2590lm
External dimensions: Φ30 *1764mm
Housing Material: Aluminium alloy & Frosted PC cover
UL Certification No.: E337911 E335951
LED Tube Light
Model: T8-L24A1F-Y36W
LED Qty/Type: 576pcs/Everlight 3528LED
Power: 36W
Input voltage: AC90~260V
Luminous Flux: Neutral white 3450lm
External dimensions: Φ30 *2367mm
Housing Material: Aluminium alloy & Frosted PC cover
UL Certification No.: E337911 E335951
LED Shading Lamp
Material & Technics: Aluminium Alloy Material, long life time and low power consumption
IP Code: IP50/ClassⅡ
Color Temperature: Warm white(2700-3500K); Neutral white(3800-4800K); Cool
white(5500-6500K)
Beam Angle: 15°~120°bases to choose from
Color Rendering Index: Ra≥80
Connection: Round/ 2 wires/3 wires/4 wires base for options
Applications: Landscape lighting, stage lighting, building lighting, billboard, exhibition lighting,
automobile show room, jewelry shop, showing case; Ideal replacement for halogen lamps and
traditional CFL
Installation methods: Fixed installing parts, adopt adjustable device. It can be adjusted to achieve
the best results according to the required angle and position.
Product Characteristics:
Excellent Light Source: Adopting American original encapsulated CREE light source, which is
high light efficiency, low brightness degradation and pure light.
Good Color Rendering Index: Adopting imported high quality optical lens which is low brightness
degradation, even light distribution and no stroboflash.
Color temperature with wide range can be made flexibly according to customers’ requirement.
High Illuminance: According with the illuminance requirements of commercial lighting,
energy-saving up to 80%.
Long Life Time: Brightness degradation is less than 3‰ per 1000hs and LED life time is over
100,000 hours.
NPL-LED Shading Lamp(Case:SD-L1D3A1) Number Description:
Item No.: V0SD-L1D3A1-C3W-CW
Number
Description V0 SD L 1 D
3 A 1 C 3W CW
Representative
of the
meaning
Input
voltage:
AC90~260V
Shading
Lamp
Low
light Round Direct
3pcs
LED Milled
pieces Silver
CREE
Chips Power:3W
Cool
white
注:L: Low Lamp M: Medium Lamp H: High Lamp
F: Reflection D: Direct (No Reflection)
1: Ceiling ring 2: Two wires base 3:Three wires base 4:Four wires base
LED Shading Lamp
Model: SD-L1D9A1
LED Qty/Type: 9pcs/CREE
Power: 9W / 23W
Input voltage: AC90~260V
Luminous Flux: Cool white 1620lm; Warm white 1215lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ125*130*217.4mm
Housing Material: Aluminium alloy
Retrofit Instruction for LED Shading Lamp
2. Step 1: Please adjust the on -off switch(Snap switch) and the slide wheel of the shading lamp
to the “off” position.(shown in drawing 1 &3)
drawing 1 drawing 2
Step 2: Put the shading lamp in the track (shown in drawing 2) and adjust the on -off switch and
the slide wheel to the “on ”position (shown in drawing 4).
Note: The purpose of adjusting the on -off switch is to stuck the switch in the track and the
purpose of adjusting the slide wheel is to stuck the lamp in the track.
drawing 3 drawing 4 drawing 5
3. Please refer to the being assembled lamp in drawing 5, Input Voltage: AC:90-260V
3. Check the position of the spring holder and the connection part before connecting 90-260V AC.
Then the lamp can operate normally.
Attention: Do not operate the wires of the driver when power on.
Note: Do not install or maintain when power on; do not change its application or dismantle
without any guidance; do not operate in humid environment; man-made sabotage is not included
in our guarantee range.
The user manual of LED Shading Lamp
Thanks for purchasing & using our LED Shading lamps which is manufactured by R&C
technology Co., Ltd .Before installing & operating our products, please carefully read the user’s
instruction, then you can enjoy the comfort the new lighting and high tech led lighting products.
We attach great importance to the quality. If you have any suggestion or opinion, please do not
hesitate to contact us, or browse our website:http://www.np-led.com
LED Grid lamps series of “R&C LED illumination” adopt the high-strength aluminum alloy
material. Its appearance and structure are scientifically and reasonably designed, it is easy to install
and sturdy, durable to us and suitable for complex environment and the illumination effect but
meanwhile it can be customized according to the customer’s request. Finlly, it complied with CE,
ROHS and other international quality and environmental certification standards, also have the
function and appearance design patents.
Technical Parameters:
Input voltage: AC90-260v
IP Code: IP50/ClassⅡ (operate in Indoor, non-humid environment )
Color Temperature: Warm white(2700-3500K); Neutral white(3800-4800K); Cool
white(5500-6500K),can be made according to customer’s requirements, it is selectable when used
in Jewelry light.
Beam Angle: 15°~120°to choose from
Connection: Round/ 3 wires/4 wires base for options
Applications: Landscape lighting, stage lighting, building lighting, billboard, exhibition lighting,
automobile showroom, jewelry shop, showing case.
Installation methods: Fixed installing parts, adopted adjustable device. It can be adjusted to
achieve the best results according to the required angle and position.
Guarantee: 3 years
Product Characteristics
Excellent Light Source: Adopting American original encapsulated CREE light source which is
high light efficiency, low brightness degradation, pure light.
Good Color Rendering Index: Adopting imported high quality optical lens with low brightness
degradation, even light distribution and no stroboflash.
Color temperature: with wide range can be made flexibly according to customers’ requirement.
High Illuminance: According with the illuminance requirements of commercial lighting,
energy-saving as high as 80%.
Long Life Time: Brightness degradation is less than 3‰ per 1000hs; LED life time is over
100,000 hrs.
Warm tips: The light of high power LED products is very strong; in order not to damage your
eyes. Please do not stare at the lamp for a long time
LED Shading Lamp
Model: SD-H3D6A1
LED Qty/Type: 6pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ125*282*217.4mm
Housing Material: Aluminium alloy
LED Shading Lamp
Model: SD-H1D7A1
LED Qty/Type: 7pcs/CREE
Power: 7W / 18W
Input voltage: AC90~260V
Luminous Flux: Cool white 1260lm; Warm white 950lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ125*282*217.4mm
Housing Material: Aluminium alloy
LED Shading Lamp
Model: SD-L3D3B1
LED Qty/Type: 3pcs/CREE
Power: 3W / 8W
Input voltage: AC90~260V
Luminous Flux: Cool white 540lm; Warm white 405lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ125*165*217mm
Housing Material: Aluminium alloy
LED Shading Lamp
Model: SD-L3D6A1
LED Qty/Type: 6pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ125*130*217.4mm
Housing Material: Aluminium alloy
LED Shading Lamp
Model: SD-L3D6A2
LED Qty/Type: 6pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ125*130*217.4mm
Housing Material: Aluminium alloy (Black)
LED Shading Lamp
Model: SD-H1F5A1
LED Qty/Type: 5pcs/CREE
Power: 5W / 13W
Input voltage: AC90~260V
Luminous Flux: Cool white 900lm; Warm white 675lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ121*242*208.4mm
Housing Material: Aluminium alloy
LED Shading Lamp
Model: SD-H1F6B1
LED Qty/Type: 5pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ121*242*208.4mm
Housing Material: Aluminium alloy
LED Shading Lamp
Model: SD-H1F6B1C
LED Qty/Type: 6pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ125*282*217.4mm
Housing Material: Aluminium alloy
LED Shading Lamp
Model: SD-H1F6B1C
LED Qty/Type: 6pcs/CREE
Power: 6W / 15W
Input voltage: AC90~260V
Luminous Flux: Cool white 1080lm; Warm white 810lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ125*282*217.4mm
Housing Material: Aluminium alloy (Black)
LED Shading Lamp
Model: SD-L1D3A1
LED Qty/Type: 3pcs/CREE
Power: 3W / 8W
Input voltage: AC90~260V
Luminous Flux: Cool white 540lm; Warm white 405lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ121*195*208.4mm
Housing Material: Aluminium alloy
LED Shading Lamp
Model: SD-L1D3A1
LED Qty/Type: 3pcs/CREE
Power: 3W / 8W
Input voltage: AC90~260V
Luminous Flux: Cool white 540lm; Warm white 405lm
Beam Angle: 15°~120°to choose from
External dimensions: Φ122*265*208.4mm
Housing Material: Aluminium alloy
LED shading lamp Model: SD-F3D7A4 LED type: 7 pcs/ CREE original packed optical source Input Power:7W/18W Input Volt: AC90-260V Luminous Flux:CW 1260lm; WW 950lm Beam Angle: 15°、25°、40°、60°、80° Overall dimension: Φ118*153*180mm Lamp body material: aluminum alloy (white)
LED shading lamp Model: SD-F3D9A4 LED type: 9 pcs/ CREE original packed optical source Input Power:9W/23W Wide Input Volt: AC90-260V Luminous Flux:CW 1620lm; WW 1215lm Beam Angle: 15°、25°、40°、60°、80° Overall dimension: Φ118*153*180mm Lamp body material: aluminum alloy (white)
LED Flood Light
Material & Technics: Single mode design integrated with many pieces of LEDs which connected
with the lamp shell directly; Aluminium Alloy Material and efficient heat dispersion ensured the
life time of LEDs.
Light Sources adopted: American original encapsulated high power CREE LED as light source;
which is low brightness degradation, pure light, no shadow, long life time, energy saving, high
efficiency and environment friendly.
IP Code: IP65/ClassⅡ
Color Temperature: Warm white(2700-3500K); Neutral white(3800-4800K); Cool white
(5500-6500K). Controllable R/G/B
Color Rendering Index: Ra≥80
Beam Angle: 10°~120°to choose from
Applications: Billboard, outside wall of buildings, tennis court, parking lot, bar, marketplace,
theater, stadium and port
Installation methods: The lamp itself integrated with the appliance; light weight and beautiful
appearance; easy to fix and maintain; angle adjusted device which can be fixed when the angle is
agreeable. It has very wide applications.
Product Characteristics:
1. The average life time of LED is over 100,000 hours. If it is lit up 24 hours everyday, it can be
used for 6~8 years; super energy saving
2. High strength armoured glass, Die Cast Aluminum housing; anti-aging silicone rubber as
sealing tape; IP code: IP65
3. Intelligent controlling technology and automatic light controlling improved the homogeneity
and coefficient of light utilization.
4. homogeneous light distribution and good controlling of dazzle; more real and brilliant color
rendering, many colors for options, all of these can be satisfied to many requirements, eliminating
depressed mood caused by low color temperature of sodium lamp and high color temperature of
halide and making people feel comfortable
5. It can be adapted to solar energy photovoltaic panel , make full use of such advantages of LED
as direct current, low voltage,and environment friendly and can also offer our customers
excellent quality, reliability and best price
LED Flood Light(Case:FL-12B1) Number Description:
Item No.: V0FL-12B1-C12W- R/G/B
Number
Description V0 FL 12 B 1 C C 12W R/G/B
Representative
of the
meaning
Input
voltage:
AC90~260V
Flood
Light
12pcs
LED Die-casting Silver Controllable
CREE
Chips Power:12W
Red,Green,
Blue. IPL
LED Flood Light
Model: FL-36E2
LED Qty/Type: 36pcs/CREE
Power: 36W / 90W
Input voltage: AC90~260V
Luminous Flux: Cool white 6480lm; Warm white 4860lm
Beam Angle: 10°~120°to choose from
External dimensions: 285*235*157mm
Housing Material: Aluminium alloy (Black)
LED Flood Light
Model: FL-12B
LED Qty/Type: 12pcs/CREE
Power: 12W / 30W
Input voltage: AC90~260V
Luminous Flux: Cool white 2160lm; Warm white 1620lm
Beam Angle: 10°~120°for options
External dimensions: 225*185*134mm
Housing Material: Aluminium alloy
LED Flood Light
Model: FL-12C
LED Qty/Type: 12pcs/CREE
Power: 12W / 30W
Input voltage: AC90~260V
Luminous Flux: Cool white 2160lm; Warm white 1620lm
Beam Angle: 10 ° ~ 120 ° to choose from
External dimensions: 206*192*146mm
Housing Material: Aluminium alloy
LED Flood Light
Model: FL-18C
LED Qty/Type: 18pcs/CREE
Power: 18W / 45W
Input voltage: AC90~260V
Luminous Flux: Cool white 3240lm; Warm white 2430lm
Beam Angle: 10 ° ~ 120 ° to choose from
External dimensions: 206*192*146mm
Housing Material: Aluminium alloy
LED Flood Light
Model: FL-18C2
LED Qty/Type: 18pcs/CREE
Power: 18W / 45W
Input voltage: AC90~260V
Luminous Flux: Cool white 3240lm; Warm white 2430lm
Beam Angle: 10 ° ~ 120 ° to choose from
External dimensions: 206*192*146mm
Housing Material: Aluminium alloy
LED Flood Light
Model: FL-24D
LED Qty/Type: 24pcs/CREE
Power: 24W / 60W
Input voltage: AC90~260V
Luminous Flux: Cool white 4320lm; Warm white 3240lm
Beam Angle: 10 ° ~ 120 ° to choose from
External dimensions: 312*166*146mm
Housing Material: Aluminium alloy
LED Flood Light
Model: FL-36D2
LED Qty/Type: 36pcs/CREE
Power: 36W / 60W
Input voltage: AC90~260V
Luminous Flux: Cool white 3840lm; Warm white 3120lm
Beam Angle: 10 ° ~ 120 ° to choose from
External dimensions: 312*166*146mm
Housing Material: Aluminium alloy (Black)
LED Flood Light
Model: FL-24E2
LED Qty/Type: 24pcs/CREE
Power: 24W / 60W
Input voltage: AC90~260V
Luminous Flux: Cool white 4320lm; Warm white 3240lm
Beam Angle: 10 ° ~ 120 ° to choose from
External dimensions: 285*235*157mm
Housing Material: Aluminium alloy (Black)
LED Wall Washer Light
Material & Technics: Aluminium Alloy, good shock resistance and surface oxidation,5mm
armoured glass,high light penetration , high temperature resistence silicone rubber sealing tape,
reliable sealing, safe, shock resistance, waterproof, sturdy and durable.
Light Sources adopted: American original encapsulated high power CREE LED as light source; 15
meters lighting distance
IP Code: IP65/ClassⅡ
Color Temperature: Warm white(2700-3500K); Neutral white(3800-4800K); Cool
white(5500-6500K); Controllable R/G/B
Beam Angle: 15°~120°for options
Applications: Varies buildings, outdoor partial lighting, landscape spot lighting, stage, billboard,
parking lot, stadium, port, square, district, public places, park, grassland, bar decoration, etc.
Installation methods: Special hole under the base for fixation; equipped with rotative wedge at the
two sides of the lamp; lighting angle can be adjusted freely.
Product Characteristics:
1.Pure and brilliant light, good homochromy, soft light, high light efficiency; each color can be
divided into 256 gray scales ; three basic colors can creat 167,700,000 kinds of colors; richful
colors.
2. Aluminium Alloy material as base, hard and solid, aging-resistance, long life time, adapt to any
outdoor temperature.
3. Normal operation under -40℃~+65℃, without heat starting time , speedy lighting time, is 10
times faster than as common bulb.
4. Cool Light source, without thermal radiation, with no harmful metal Hg, environment friendly,
can protect the lighting objects.
5. Life time over 50,000 hours; 80% power consumption lower than incandescent lamp;
remarkable economic effectiveness for long term use.
6. Running color changements reflect out colorful walls and break through the previous single and
rigid clolor wall pattern. End to end connection can realize even color brush of the wall.
LED Wall Washer Light(Case:WL-18A) Number Description:
Item No.: V0WL-18A1C-C18W-RGB
Number
Description V0 WL 18 A 1 C C 18W R/G/B
Representative
of the
meaning
Input
voltage:
AC90~260V
Wall
Washer
Light
18pcs
LED
Milled
pieces Silver Controllable
CREE
Chips Power:18W
Red,Green,
Blue. IPL
LED Wall Washer Light
Model: WL-18A
LED Qty/Type: 18pcs/CREE
Power: 18W
Input voltage: AC90~260V
Luminous Flux: Cool white 1620lm; Warm white 1205lm
Beam Angle: 15°~120°for options
External dimensions: 1000*75*75mm
Housing Material: Aluminium alloy
LED Wall Washer Light
Model: WL-27A
LED Qty/Type: 27pcs/CREE
Power: 27W
Input voltage: AC90~260V
Luminous Flux: Cool white 2430lm; Warm white 1810lm
Beam Angle: 15°~120°for options
External dimensions: 1000*75*75mm
Housing Material: Aluminium alloy
LED jewelry counter Strip Light
Material & Technics: The adoption of high quality Aluminium Alloy and Aluminium Substrate as
heat dispersion material guarantee the stability and high efficiency of LED,and effectively reduce
its brightness degradation in the process of application.
LED quantities: 60pcs/m
LED standard: SMD 5050 with 3 chips
Voltage: DC12V
Operating Temperature: -30℃~+70℃
Lighting effects: Scatter; soft light, beam angle can reach 120 degrees
Color Temperature: Warm white(2700-3500K); Cool white(7000-7500K)
Applications: Watches and jewelry shops,case for precise parts and indoor decoration
Installation methods: Aluminum bar as wedge, stainless steel holder and glass glue, can be cut and
connected freely.
Product Characteristics:
①Pure color: cool white and warm white and etc;
②Low power consumption, high brightness light source and stable performance;
③Unique circuit technology and high standard anti-static technology make sure the life time and
quality of the lamp;
④Unique Switch CCS technology make sure each cree LED work stably;
⑤Shock resistence and maintance free. Normal operation life over 50,000 hours.
LED counter Strip Light (Case:BL-1000CW) Number Description:
Item No.: VLBL-1000A1-J12W-CW
Number
Description VL BL 1000 A 1 J 12W CW
Representative
of the
meaning
DC 12V Strip
Light 1m
Milled
pieces Silver
Epistar
Chips Power:12W
Cool
white
LED counter aluminium Strip Light
Model: BL-WW1000 (Warm white )
LED Qty/Type: 66pcs/m/5050 Three-chip SMD
Power: 12W
Input voltage: DC 12V
Luminous Flux: Warm white 860lm
External dimensions: 1000*24.4mm
Housing Material: Aluminium alloy
LED counter aluminium Strip Light
Model: BL-CW1000(Cool white )
LED Qty/Type: 66pcs/m/5050 Three-chip SMD
Power: 12W
Input voltage: DC 12V
Luminous Flux: Cool white 900lm
External dimensions: 1000*24.4mm
Housing Material: Aluminium alloy
LED jewelry counter spotlight
Material and Craft: unique structural design of streamlined appearance, excellent thermal
conductor -- high-pressure aluminum as lamp body, spreading special painting on the surface.
IP Code: IP50/ClassⅡ
Mounted places: Indoor
Color Temperature: Warm white 2700-3500K;Neutral white 3800-4800K;Cool white 5500-6500K
Beam Angle: 15°~120°to choose from
Light source adopted: American original encapsulated CREE light source which can make sure the
lamp energy-saving, high efficient, environment friendly and the life time being longer
Applications: jewelry, diamond and crystal show case and counter in shipping mall for spot
lighting.
Installation method: Fix Stainless steel brackets on the reserved holes of counter, and tight the
bottom by screws, connect the power cord and then power can be used normally.
Products Characteristics: Novel design, easy installation, safe and reliable , long life time, high
efficiency and energy-saving.
LED counter spotlight
Model: JS-01A
LED Qty/Type: 3pcs/CREE
Power: 3W
Input voltage: AC/DC12V
Luminous Flux: Cool white 160lm; Warm white 130lm
External dimensions: Φ32*83mm
Housing Material: Aluminium alloy
LED counter spotlight
Model: JS-03A
LED Qty/Type: 3pcs/CREE
Power: 3W / 5W
Input voltage: AC/DC12V
Luminous Flux: Cool white 480lm; Warm white 390lm
External dimensions: Φ40*101.5mm
Housing Material: Aluminium alloy
AR111 BULB
AR111 lamp cup/ spotlight Model:AR111-9A1 LED type: 9 pcs/ CREE original packed optical source Input Power:9W Input Volt: AC/DC12V Luminous Flux:CW 990lm; WW 810lm Beam Angle: 15°, 25°,40°, 60°, 80° Overall dimension: Φ110*67.5mm Lamp body material: aluminum alloy (!!!!!!!此处照度值可套用 PAR38-9A1)
AR111 lamp cup/ spotlight Model:AR111-9C1F LED type: 9 pcs/ CREE original packed optical source Input Power:9W Input Volt: AC/DC12V Luminous Flux:CW 1000lm; WW 820lm Beam Angle: 40° Overall dimension: Φ110*65.5mm Lamp body material: aluminum alloy (!!!!!!!此处照度值可套用 PAR38-9C1F)
New products:
MR16 lamp cup/spotlight(section bar)
Model: HY-MR16-3A1-C3W/5W
LED type: 3 pcs/ CREE XPE original packed optical source
Input power: 3W/5W
Input volt: AC/DC 12V
Luminous Flux: cool white: 240lm ; warm white:200lm (3W parameter
values)
cool white: 330lm ; warm white:260lm (8W parameter values)
Beam Angle: 25°、40°、60°(compound lens-Five To One) Overall dimension: Φ50*48.5mm
Lamp body material: aluminum alloy extrusions
Adaptive Connector: GU5.3
MR16 lamp cup/spotlight(section bar)
Model: HY-MR16-5A1-C5W/8W
LED type: 3 pcs/ CREE XPE original packed optical source
Input power: 5W/8W
Input volt: AC/DC 12V
Luminous Flux:cool white: 650lm ; warm white:450lm (8W parameter values)
Beam Angle: 25°、40°、60°(compound lens-Five To One) Overall dimension: Φ50*48.5mm
Lamp body material: aluminum alloy extrusions
Adaptive Connector: GU5.3
GU10 lamp cup/ spotlight(section bar) Model: GU10-3A1-C3W/5W LED Type:3 pcs/ CREE XPE original packed optical source Input power: 3W/5W
Input Volt: AC90-260V
Luminous Flux:CW 240lm; WW 200lm(3W parameter values) CW 330 lm WW 260lm( 5W parameter values))
Beam Angle: 25°、40°、60° Overall dimension: Φ50*58mm Lamp body material: aluminum alloy extrusions Adaptive Connector: GU10
JDR lamp cup/ spotlight(section bar) Model: GU10-3A1-C3W/5W LED type: 3 pcs/ CREE XPE original packed optical source Input power: 3W/5W
Input Volt: AC90-260V
Luminous Flux:CW 240lm; WW 200lm(3W parameter values) CW 330 lm WW:269lm(5W parameter values)
Beam Angle: 25°、40°、60° Overall dimension: Φ50*61.5mm/64.5mm/70.5mm/72.5mm Lamp body material: aluminum alloy extrusions Adaptive Connector: E11/E12/E14/E17
MR16 lamp cup/ spotlight(section bar) Model: MR16-1A1-C3W LED type: 1 pcs/ CREE XPE original packed optical source Input Power:3W Input Volt: AC/DC 12V Luminous Flux: CW 150lm; WW 130lm Beam Angle: 30° Overall dimension: Φ50*53mm Lamp body material: aluminum alloy extrusions Adaptive Connector: GU5.3
GU10 lamp cup/ spotlight(section bar) Model: GU10-1A1-C3W LED type: 1 pcs/ CREE XPE original packed optical source Input Power:3W Input Volt: AC90-260V
Luminous Flux:CW 150lm; WW 130lm Beam Angle: 30° Overall dimension: Φ50*63mm
Lamp body material: aluminum alloy extrusions Adaptive Connector: GU10
JDR lamp cup/ spotlight(section bar) Model: JDR-1A1-C3W LED type: 1 pcs/ CREE XPE original packed optical source Input Power:3W
Input Volt: AC90-260V
Luminous Flux:CW 150lm; WW 130lm Beam Angle: 30° Overall dimension: Φ50*67mm/70mm/75.5mm/77.5mm
Lamp body material: aluminum alloy extrusions Adaptive Connector: E11/E12/E14/E17
MR16灯杯/射灯(型材)这款暂时不上 MR16 lamp cup/ spotlight(section bar) 型号:MR16-4A1-C4W Model:MR16-4A1-C4W LED类型:4pcs/CREE原装光源 LED type: 4 pcs/ CREE original packed optical source 输入功率:4W Input Power:4W 输入电压:AC/DC12V Input Volt: AC/DC12V 光通量:冷白 lm;暖白 lm Luminous Flux:CW ?lm; WW ?lm 投射角度:15°,25°, 40° Beam Angle: 15°, 25°,40° 外形尺寸:Φ50*56.7mm Overall dimension: Φ50*56.7mm
灯体材质:铝合金型材 Lamp body material: aluminum alloy extrusions 适配接口:GU5.3 Adaptive Connector: GU5.3
LED Bulb
Model:LB-Q10K-12W LED type: 10 pcs/ CREE MX6 original packed optical source Input Power:12W Input Volt: AC90-260V Luminous Flux:CW 522lm; WW 480lm Beam Angle: 140° Overall dimension: Φ70*158mm Lamp body material: aluminum alloy &frosted& pc cover Adaptive Connector: E26/E27
LED Bulb
Model:LB-R63-C6W LED type: 6 pcs/ CREE MXL original packed optical source Input Power:6W Input Volt: AC90-260V Luminous Flux:CW 330lm; WW 260lm Beam Angle: 140° Overall dimension: Φ60.5*111mm Lamp body material: aluminum alloy & frosted & pc cover Adaptive Connector: E26/E27
LED shading lamp Model: SD-F3D7A4 LED type: 7 pcs/ CREE original packed optical source Input Power:7W/18W Input Volt: AC90-260V Luminous Flux:CW 1260lm; WW 950lm Beam Angle: 15°、25°、40°、60°、80° Overall dimension: Φ118*153*180mm Lamp body material: aluminum alloy (white)
LED shading lamp Model: SD-F3D9A4 LED type: 9 pcs/ CREE original packed optical source Input Power:9W/23W Wide Input Volt: AC90-260V Luminous Flux:CW 1620lm; WW 1215lm Beam Angle: 15°、25°、40°、60°、80° Overall dimension: Φ118*153*180mm Lamp body material: aluminum alloy (white)