LED SOLAR LIGHT WALL LIGHT MODEL-03 - Lemar Lighting|LED ...
Transcript of LED SOLAR LIGHT WALL LIGHT MODEL-03 - Lemar Lighting|LED ...
Made in China
37020003
37020006
LMR-SOLAR-WL003-1.5W
DIMENTIONS
FEATURES & BENEFITS
APPLICATIONS
- Solar energy only. - Front & back Light shining, beautiful as a ‘butterfly’. - Scientific human induction design, wide angle detection way. - High performance lithium battery. - High quality mono-crystalline silicon solar panel. - Long lifespan. - Environmentally friendly.
ITEM NO.
ITEM NO.
37020003
37020006
1.5W
1.5W
1.5W
1.5W
RatedPower
RatedPower
Luminous Flux
Battery Solar Panel
Charging Time
220 lm
220 lm
5-6Hrs/Day
5-6Hrs/Day
Li-ion,1200mAH/3.7V
Li-ion,1200mAH/3.7V
Mono-crystalline silicon 0.7Wp
Mono-crystalline silicon 0.7Wp
90°Beam Angle
4000K
4000K
White
Black
Detection angle: 120°Detection area: ≤6mDetection angle: 120°Detection area: ≤6m
CCT
SPECIFICATIONS
96mm
96mm
79.0mm
79.0mm
144.5mm
144.5mm
Sensor
HeightWidthLength
°CWorking Temperature
IP Grade
Material
-15C°- 50C°
IP65
HousingColour
SMD 2835*14pcsChip Size
2 different lighting modes
2 different lighting modes
WorkingTime
W
L
H
ABS+PC, Anti-UV
WALL LIGHT MODEL-03LED SOLAR LIGHT
Made in China
WORKING MODES:
INSTALLATION INSTRUCTION:
Mode A:
Mode B:
Automatically turns on to full brightness (220lm) when motion is detected in the range ≤6Mtrs and then turns to weak brightness (front light on & back light on) in 10 seconds of no motion.
Automatically turns on to full brightness (220lm) when motion is detected in the range ≤6Mtrs and then turns to weak brightness (front light off & back light on) in 10 seconds of no motion.
1. Please use the card to measure hole position correctly and drill 2 holes.2. Fix 2 expansion plugs into the holes. 3. Fix a screw to the lower expansion plug with a spare space, insert the notch onto the screw. 4. Straighten the whole lamp and fasten the upper screw.5. Press the button to adjust to demanded working mode.
WALL LIGHT MODEL-03LED SOLAR LIGHT
Made in China
37020004
37020007
37020004
37020007
LMR-SOLAR-WL003-3.2W
DIMENTIONS
FEATURES & BENEFITS
APPLICATIONS
- Solar energy only. - Front & back Light shining, beautiful as a ‘butterfly’. - Scientific human induction design, wide angle detection way. - High performance lithium battery. - High quality mono-crystalline silicon solar panel. - Long lifespan. - Environmentally friendly.
ITEM NO.
ITEM NO.
37020004
3.2W
3.2W
3.2W
3.2W
RatedPower
RatedPower
Luminous Flux
Battery Solar Panel
Charging Time
400 lm
400 lm
5-6Hrs/Day
5-6Hrs/Day
4000K
4000K
Detection angle: 120°Detection area: ≤6mDetection angle: 120°Detection area: ≤6m
CCT
SPECIFICATIONS
140mm
140mm
109.2mm
109.2mm
212mm
212mm
Sensor
HeightWidthLength
°CWorking Temperature
IP Grade
Material
-15C°- 50C°
IP65
HousingColour
SMD2835*30pcsChip Size
3 different lighting modes
3 different lighting modes
WorkingTime
ABS+PC, Anti-UV
Mono-crystalline silicon 2.3Wp
Mono-crystalline silicon 2.3Wp
Li-ion,2000mAH/3.7V
Li-ion,2000mAH/3.7V
W
L
H
White
Black
WALL LIGHT MODEL-03LED SOLAR LIGHT
Made in China
WORKING MODES:
Mode A:
Mode B:
Mode C:
Automatically turns on at the dusk (<30 lux) and remains 20% bright, up to 5 hours after which it turns off.
Automatically turns on to full brightness (400lm) when motion is detected in the range ≤6 mtrs and then turns to 3% brightness in 20 seconds of no motion.
Automatically turns on to full brightness (400lm) when motion is detected in the range ≤6 mtrs and then turns off in 30 seconds of no motion.
1. Pls use the card to measure hole position correctly and drill 3 holes.2. Fix 3 expansion plugs into the holes. 3. Fix 3 screws into the expansion plugs with a spare space.. 4. Insert the notch to the lower screw and fasten the whole lamp well.5. Press the back button to adjust to the demanded working mode.
INSTALLATION INSTRUCTION:
WALL LIGHT MODEL-03LED SOLAR LIGHT
Made in China
37020005
37020008
37020005
37020008
LMR-SOLAR-WL003-6.8W
DIMENTIONS
FEATURES & BENEFITS
APPLICATIONS
- Solar energy only. - Front & back Light shining, beautiful as a ‘butterfly’. - Scientific human induction design, wide angle detection way. - High performance lithium battery. - High quality mono-crystalline silicon solar panel. - Long lifespan. - Environmentally friendly.
ITEM NO.
ITEM NO.
6.8W
6.8W
6.8W
6.8W
RatedPower
RatedPower
Luminous Flux
Battery Solar Panel
Charging Time
800 lm
800 lm
5-6Hrs/Day
5-6Hrs/Day
Li-ion,4000mAH/3.7V
Li-ion,4000mAH/3.7V
Mono-crystalline silicon 4.4Wp
Mono-crystalline silicon 4.4Wp
120°*60°Beam Angle
4000K
4000K
Detection angle: 120°Detection area: ≤6mDetection angle: 120°Detection area: ≤6m
CCT
SPECIFICATIONS
221mm
221mm
109.2mm
109.2mm
270mm
270mm
Sensor
HeightWidthLength
ABS+PC, Anti-UV
°CWorking Temperature
IP Grade
Material
-15C°- 50C°
IP65
SMD2835*60pcsChip Size
3 different lighting modes
3 different lighting modes
WorkingTime
HL
W
HousingColour
White
Black
WALL LIGHT MODEL-03LED SOLAR LIGHT
Made in China
WORKING MODES:
Installation Instruction
Mode A:
Mode B:
Mode C:
Automatically turns on at the dusk (<30 lux) and remains 20% bright, up to 5 hours after which it turns off.
Automatically turns on to full brightness (800lm) when motion is detected in the range ≤6 mtrs and then turns to 3% brightness in 20 seconds of no motion.
Automatically turns on to full brightness (800lm) when motion is detected in the range ≤6 mtrs and then turns off in 30 seconds of no motion.
1. Pls use the card to measure hole position correctly and drill 3 holes.2. Fix 3 expansion plugs into the holes. 3. Fix 3 screws into the expansion plugs with a spare space.. 4. Insert the notch to the lower screw and fasten the whole lamp well.5. Press the back button to adjust to the demanded work-ing mode.
WALL LIGHT MODEL-03LED SOLAR LIGHT