Post on 24-May-2019
Rail Type Terminal Block
TXJ series
Small rail type for equipmentTR series
C rail type
TTG, TTJ and TT serie s
2-stage typeTN series
Quick joint rail type
TXW series
Multi-rail Stud typeTFP and TTFP series
Finger protection type
TX series
Multi-rail Standard typeTXU series
Multi-rail Raised type
C_04-工業用端子台.p65 06.7.26, 2:32 pmPage 133 Adobe PageMaker 6.5J/PPC
134
Terminal Blocks
Termin
al Blo
cks
Application
Terminal unit600V 1.25mm2 [15A] M3 x 6 ± screw type
2mm2 [20A] M3 x 8 ± screw typeM3.5 x 8 ± screw typeM3.5 x 8 ± screw type
5.5mm2 [40A] M4 x 10 ± screw type8mm2 [50A] M5 x 12 ± screw type14mm2 [80A] M5 x 12 ± screw type22mm2 [90A] M6 x 12 ±with round washer38mm2 [130A] M8 x 14 +hexagonal bolt60mm2 [175A] M8 x 16 +hexagonal bolt100mm2 [240A] M10 x 12 +hexagonal bolt150mm2 [310A] M10 x 20 +hexagonal bolt200mm2 [400A] M12 x 25 hexagonal bolt150mm 2× 2 [500A]200mm2 [400A] M16 x 40 stud250mm2 [500A]325mm2 [600A]
End plateFor TX7 to TX20For TX30For TX50For TX60For TX100For TX150Insulation barrierFor TX600 (Dimension A 240 mm in setting)
Type name
TX 7TX 10 SM3TX 10 STX 10TX 20TX 30TX 50TX 60TX 100TX 150TX 200TX 300TX 400
TX 600
TXA 1TXA 3TXA 5TXA 6TXA 10TXA 15
TXH 60
External dimensions (mm)A
38
46
5472768286120
384649547276
-
Multi-rail terminal block
Standard type
TX, TXU and TXW Series
B
29
343738455157.562.573.5
86.5
293437384551
-
C
7.38
9.51214.51519.52728394662
64
D
66.7
89.712.5
1724253137.552
Thickness 3
Thickness 3.5Thickness 4
-
TX7 TX30 TX200
TX series
Cover
End plate
Stopper
Removal tool
Short bar
Name sticker
C_04-工業用端子台.p65 06.7.26, 2:32 pmPage 134 Adobe PageMaker 6.5J/PPC
135
Terminal BlocksTerm
inal B
locks
Application
Terminal unit600V 1.25mm2 [15A] M3 x 8 ± raised type
2mm2 [20A] M3 x 8 ± raised typeM3.5 x 8 ± raised typeM3.5 x 8 ± raised type
5.5mm2 [40A] M4 x 8.5 ± raised type8mm2 [50A] M5 x 12 ± raised type14mm2 [80A] M5 x 12 ± raised type22mm2 [90A] M6 x 12 ± raised type38mm2 [130A] M8 x 15 +hexagonal bolt raised type
End plateFor TXU7 to 20For TXU30For TXU50For TXU60For TXU100
Type name
TXU 7TXU 10 SM3TXU 10 STXU 10TXU 20TXU 30TXU 50TXU 60TXU 100
TXUA 1TXUA 3TXUA 5TXUA 6TXUA 10
External dimensions (mm)A
38
46
5472
3846495472
Multi-rail terminal block
Raised type
TX, TXU and TXW Series
B
32.5
40424457
32.540424457
C
7.38
9.511.514.51519.527
D
66.7
89.712.5
1724
Thickness 3
Thickness 3.5Thickness 4
TXU10 TXU30
NotesThe table above is based on connection to the copper bare wire and the crimp terminal. The applicable wires with * indicates connection to the crimpterminalonly. Use UL standard parts and CSA standard parts for crimp terminal. Be careful for the following points:・Connection to crimp terminal: Use the crimp terminal with insulated coating or insulate the bare crimp terminal with sleeve, tube or tape.・Connection to two bare wires: Connect the wire with the same size and type (single wire or stranded). Do not connect the wires with different sizes andtypes.
B
A D
C
Rating when the product is used as UL/CSA certified part or EN/IEC standard certified part(TÜV certification CE)
Basic type name
Standard typeTX 7TX 10 SM3TX 10 STX 10TX 20TX 30
TX 50
TX 60TX 100TX 150TX 200TX 300TX 400
Raised typeTXU 7TXU 10 SM3TXU 10 STXU 10TXU 20TXU 30
TXU 50
TXU 60TXU 100----
Ratedvoltage(V)
600600600600600600
600
600600600600600600
EN/IEC standardRatedcurrent(A)
152020254060
6080110140190300350540
Applicable wire(AWG/MCM) Note
Single wire20 to 1620 to 1420 to 1420 to 1418 to 1016 to 10
16 to 8-
*14 to 10-----
Stranded wire20 to 1620 to 1420 to 1420 to 1418 to 1016 to 8
16 to 8*6*14 to 4*8 to 2*4 to JIS60mm2
*2 to JIS100mm2
*2 to JIS150mm2
*JIS100 to 250mm2
UL standardRatedcurrent(A)
101515203050
306580115175230310380
Applicable wire(AWG/MCM) Note
Single wire20 to 1620 to 1420 to 1420 to 1418 to 1016 to 12
16 to 10-
*14 to 10-----
Stranded wire20 to 1620 to 1420 to 1420 to 1418 to 1016 to 10*816 to 10*6*14 to 4*8 to 2*6 to 2/0*4 to 4/0*4 to 350*1/0 to 500
CSA standardRatedcurrent(A)
101515203045
-
80115175230310380
Applicable wire(AWG/MCM)Note
20 to 1620 to 1420 to 1420 to 1418 to 1016 to 8
-
*14 to 4*8 to 2*6 to 2/0*4 to 4/0*4 to 350*1/0 to 500
C_04-工業用端子台.p65 06.7.26, 2:33 pmPage 135 Adobe PageMaker 6.5J/PPC
136
Terminal Blocks
Termin
al Blo
cks
Application
Terminal unit600V 38mm2 [130A] M8 x 25 stud
60mm2 [175A] M8 x 20 stud100mm2 [240A] M10 x 30 stud200mm2 [400A] M12 x 35 stud150mm 2× 2 [500A]
End plateFor TXW100 and TXW100DFor TXW150For TXW200 and TXW200DFor TXW400
Type name
TXW 100TXW 150TXW 200TXW 400
TXWA 10TXA 15TXWA 20TXWA 40
External dimensions (mm)A
76
88116
76
88116
Multi-rail terminal block
Stud type
TX, TXU and TXW Series
B
56.5516173.5
56.5516173.5
C
30283562
D
27253152
Thickness 4
Thickness 5
TXW100
A C
B
D
Application
Terminal unitStandard 1.25mm2 [15A] M3 x 8 ± raised typetype 600V 2mm2 [20A] M3.5 x 8 ± raised type
5.5mm2 [40A] M4 x 8.5 ± raised type14mm2 [80A] M5 x 10 ± raised type
2-stage 2mm2 [20A] M3 x 8 ± raised typetype 600V M3.5 x 8 ± raised typeFor grounding 2mm2 M3.5 x 8 ± raised type600V 5.5mm2 M4 x 8.5 ± raised typeEnd plateFor TFP15 and TFP20For TFP40For TFP80For TTFP203 and TTFP2035
Type name
TFP 15 □TFP 20 □TFP 40 □TFP 80 □TTFP 203 □TTFP 2035□TFE 20TFE 40
TFPA 20 □TFPA 40 □TFPA 80 □TTFPA 20 □
External dimensions (mm)A
42424765696951.553.5
42476569
Finger protection terminal block TFP and TTFP Series
B
36.536.538.547.560.560.539.541
36.538.547.560.5
C
781114889.512.5
D
66.79.712.56.76.76.79.7
Thickness 3Thickness 3Thickness 3Thickness 8
TFP20
Note□ of the type name indicates the body color designated symbol. Except for gray - standard color, the color designated product is built to order.No symbol: Gray, R: Red, Y: Yellow, K: Black, B: Blue, W: White, G: Green
TFE20 TTFP203
A
B
C
D
C_04-工業用端子台.p65 06.7.26, 2:33 pmPage 136 Adobe PageMaker 6.5J/PPC
137
Terminal BlocksTerm
inal B
locks
Rating when the product is used as UL.c-UL-us certified part or EN/IEC standard certified part(TÜV certification CE)
Typename Note 3
TFP 15
TFP 20
TFP 20+TFP 40
TFP 40+TFP 80
TFP 80+TTFP 203
TTFP2035TFE 20
TFE 20+TFE 40
TFE 40+
Ratedvoltage(V)
600
600
600600
600600
600600
600
600
600600
600
EN/IEC standardRatedcurrent(A)15
20
-40
-60
80
-20
20
-
--
-
Applicable wire(AWG/MCM) Note 1
Single wire20 to 16(0.5 to 1.5mm2)20 to 14(0.5 to 2.5mm2)
-18 to 10(0.75 to 6mm2)
-16 to 8(1.5 to 10mm2)
-20 to 14(0.5 to 2.5mm2)20 to 14(0.5 to 2.5mm2)20 to 14(0.5 to 2.5mm2)
-18 to 10(0.75 to 6mm2)
-
Stranded wire20 to 16(0.5 to 1.5mm2)20 to 14(0.5 to 2.5mm2)
-18 to 10(0.75 to 6mm2)
-16 to 8(1.5 to 10mm2)6 (16 mm2) crimpterminal
-20 to 14(0.5 to 2.5mm2)20 to 14(0.5 to 2.5mm2)20 to 14(0.5 to 2.5mm2)
-18 to 10(0.75 to 6mm2)
-
UL standardRatedcurrent(A)10
20
1530
2565
3015
15
-
--
-
Applicable wire(AWG/MCM) Note 1
Single wire20 to 16
20 to 14
18 to 10
18 to 1216 to 10
14 to 1220 to 14
20 to 14
20 to 14
20 to 1618 to 10
16 to 12
Stranded wire20 to 16
20 to 14
18 to 10
18 to 1216 to *6
-20 to 14
20 to 14
20 to 14
18 to 1418 to 10
16
c-UL-us standardRatedcurrent(A)10
20
-30
-65
-15
15
-
--
-
Applicable wire(AWG/MCM)Note 1
20 to 16
20 to *14
-18 to *10
-16 to *6
-20 to 14
20 to 14
20 to *14
-18 to *10
-Notes1. The table above is based on connection to the copper bare wire and the crimp terminal. The applicable wires with * indicates connection to the crimpterminal only. Use UL standard parts and c-UL-us standard parts for crimp terminal. Be careful for the following points:・Connection to crimp terminal: Use the crimp terminal with insulated coating or insulate the bare crimp terminal with sleeve, tube or tape.・Connection to two bare wires: Connect the wire with the same size and type (single wire or stranded). Do not connect the wires with different sizesand types.
2. FW1: Factory wiring, FW2: Factory wiring and field wiring3. When FW2 is used in TFP20, TFP40, TFP80, TFE20 and TFE40, use the rating with (+) at the end of the type name.
FWNote 2
2
1
21
21
22
2
1
21
2
C_04-工業用端子台.p65 06.7.26, 2:33 pmPage 137 Adobe PageMaker 6.5J/PPC
138
Terminal Blocks
Termin
al Blo
cks
Application
Terminal unitTTG series 2mm2 [20A] M3 x 8 ± screw type600V M3 x 8 ± raised type
M3.5 x 8 ± screw typeM3.5 x 8 ± raised type
5.5mm2 [40A] M4 x 10 ± screw typeM4 x 8.5 ± raised type
TT series 1.25mm2 [15A] M3 x 8 ± screw type600V M3 x 8 ± raised type
2mm2 [20A] M3.5 x 8 ± screw typeM3.5 x 8 ± raised type
3.5mm2 [30A] M4 x 10 ± screw typeM4 x 10 ± raised type
TTJ 2mm2 [20A] M3.5 x 8 ± screw type600V M3.5 x 8 ± raised typeEnd plateFor TTG203, TTG20U3, TTG2035 and TTG20U35For TTG40 and TTG40UFor TT10For TT20For TTJ8
Type name
TTG 20 3TTG 20 U3TTG 20 35TTG 20 U35TTG 40TTG 40 UTT 10 SKTT 10 SUKTT 10 SKM3.5TT 10 SUKM3.5TT 20 KTT 20 UKTTJ 8TTJ 8U
TTGA 20TTGA 40TTA1SKTTA2KTTJA8
External dimensions (mm)A
62
67
62
67
48.5
6267626749
2-stage type terminal block TTG, TT and TTJ Series
B
57
62
50.5
58
49
58.162.650.55949
C
8
11
8
11.5
8
D
6.7
9.7
6.7
9.7
6.7
Thickness 8Thickness 10.5Thickness 8Thickness 8Thickness 8
TTG20 TT20K
NotesThe table above is based on connection to the copper bare wire and the crimp terminal. The applicable wires with * indicates connection to the crimpterminal only. Use UL standard parts and c-UL-us standard parts for crimp terminal. Be careful for the following points:・Connection to crimp terminal: Use the crimp terminal with insulated coating or insulate the bare crimp terminal with sleeve, tube or tape.・Connection to two bare wires: Connect the wire with the same size and type (single wire or stranded). Do not connect the wires with different sizesand types.
TTJ8
Rating when the product is used as c-UL-us certified part or EN/IEC standard certified part(TÜV certification CE)
Type name
Screw typeTTJ 8
TTG 203
TTG 2035
TTG 40
Raised typeTTJ 8U
TTG 20U3
TTG20U35TTG 40U
Ratedvoltage(V)
500
600
600
600
EN/IEC standardRatedcurrent(A)
20
20
20
40
Applicable wire(AWG/MCM) Note
Single wire20 to 14(0.5 to 2.5mm2)20 to 14(0.5 to 2.5mm2)20 to 14(0.5 to 2.5mm2)18 to 10(0.75 to 6mm2)
Stranded wire20 to 14(0.5 to 2.5mm2)20 to 14(0.5 to 2.5mm2)20 to 14(0.5 to 2.5mm2)18 to 10(0.75 to 6mm2)
UL standardRatedcurrent(A)-
15
15
3025
Applicable wire(AWG/MCM) Note
Single wire-
20 to 14
20 to 14
18 to *1018 to 12
Stranded wire-
20 to 14
20 to 14
18 to *1018 to 12
CSA standardRatedcurrent(A)-
15
15
30
Applicable wire(AWG/MCM)
Note
-
20 to 14
20 to 14
18 to *10
C_04-工業用端子台.p65 06.7.26, 2:33 pmPage 138 Adobe PageMaker 6.5J/PPC
139
Terminal BlocksTerm
inal B
locks
Application
Terminal unit600V 1.25mm2 [15A] M3 3P integrated structure
2mm2 [20A] M3.5 3P integrated structure2mm2 [20A] M3.5 2P integrated structure
3P integrated structure5.5mm2 [40A] M4 3P integrated structure8mm2 [50A] M5 3P integrated structure22mm2 [90A] M6 1P38mm2 [130A] M8 1P100mm2 [240A] M10 1P200mm2 [400A] M12 1P150mm2×2 [500A]
Type name
TN 13 SBKM3TN 13 SBKM3.5TN 12 BKTN 13 BKTN 20 BKTN 30 BKTN 60 BKTN 100KTN 200KTN 400K
External dimensions (mm)A
404040404045567486125
Quick joint rail type terminal block TN Series
B
30303030303438435773
C
252520.530354322323962
D
6.76.7889.712.217243152
TN12BK TN13BK TN200K
A
B
D
C
Application
Terminal unit250V 1.25mm2 [10A] M3 x 6 ±with round washer
M3 x 6 ± screw type500V 2mm2 [20A] M3.5 x 6 ± with round washer
M3.5 x 6 ± screw typeEnd plateFor TXJ7 and TXJ 7ZFor TXJ8 and TXJ 8Z
Type name
TXJ 7TXJ 7ZTXJ 8TXJ 8Z
TXJA7TXJA8
External dimensions (mm)A
23232828
2328
Small rail type terminal block for equipment TXJ Series
B
19.519.52222
19.522
C
7788
D
666.76.7
Thickness 2.5Thickness 2.5
TXJ7 TXJ8
C_04-工業用端子台.p65 06.7.26, 2:33 pmPage 139 Adobe PageMaker 6.5J/PPC
140
Terminal Blocks
Termin
al Blo
cks
Application
Terminal unit600V 1.25mm2 [15A] M3 x 8 ± screw type
2mm2 [20A] M3.5 x 8 ± screw type5.5mm2 [40A] M4 x 10 ± screw type8mm2 [50A] M5 x 12 ± screw type22mm2 [90A] M6 x 12 ± with round washer38mm2 [130A] M8 x 14 + hexagonal bolt100mm2 [240A] M10 x 20 + hexagonal bolt200mm2 [400A] M12 x 25 hexagonal bolt150mm2×2 [500A]
End plateFor TR10SK and TR10KFor TR20KFor TR30KFor TR60KFor TR100K
Type name
TR 10 SKTR 10 KTR 20 KTR 30 KTR 60 KTR 100 KTR 200 KTR 400 K
TRA 1 □KTRA 2 □KTRA 3 □KTRA 6 □KTRA 10 □K
External dimensions (mm)A
32.53236.545.5537183.5120
3337465371
C-shaped rail type terminal block TR Series
B
28.528.530.534374557.573.5
28.530.53437.545
C
89.51114.519.5273962
D
6.789.212.517243152
Thickness 2.5Thickness 2.5Thickness 3.2Thickness 3.3Thickness 4
TR20K TR100K
Remarks1. □ of the end plate type name indicates the designated symbol for presence of seal groove. No symbol (With seal groove), N (No seal groove)2. The type without seal groove also functions as seal stopper. Two are used at both ends.
C_04-工業用端子台.p65 06.7.26, 2:34 pmPage 140 Adobe PageMaker 6.5J/PPC
141
Terminal BlocksTerm
inal B
locks
Terminal unit End plate Cover Name sticker Rail Stopper Short bar Assembly part
TXA1 TXB2, TXB2L TXC07 TRC21 (DIN rail) (for DIN rail) TJ762, TJ7202TXC073 TRC22 TXDA2, TXDA2M TXE1TXC1 TRC23 TNDS2, JXDB TXE2 TJ164, TJ1204TXC13 JTXE3
(Kasuga C type TJ162, TJ1202TXC2 rail) TJ262
TXA3 TRB3, TRB3L TXC23 TRD2, TRD2M (for Kasuga C JTJ302BTXA5 TRC21 type) JTJ802BTXA6 TRB6 TRC22 (DIN / C type TRE1 ーTXA10 TRB10N, TRB10N03 TRC23 dual purpose)TXA15 TRB10N TRDA2, TRDA2MNot TRB20N, TRB20N03 Includednecessary TRB20N, TRB20N03 (TRC21, TRC22,
TRB40N, TRB40N03 TRC23 can beTRB40N, TRB60N03 used)
TXUA1 TXB2, TXB2L TRC21 TJ762, TJ7202TRC22 TJ164, TJ1204TRC23
TJ162, TJ1202TJ262
TXUA3 TRB3, TRB3L JTJ302BTXUA5 JTJ802BTXUA6 TRB6 -TXUA10 TRB10N, TRB10N03TXWA10 TRB10NTXA15 TXWA20 TRB20NTXWA40 TRB40NTFPA20 (TFPB20) TRC21 (DIN rail) TXE1 TJ7203B
TRC22 TXDA2, TXDA2M TXE2 TJ164B, TJ1204BTFPA40 (TFPB40) TRC23 TNDS2, JXDB JTXE3 TJ264BTFPA80 (TFPB80) JTJ802BTTFPA20 (TTFPB20) (DIN / C type dual purpose) Set use of TXE2 and TJ164B TTS1S (conjunction screw)
TRDA2, TRDA2M TXE2C is recommended TJ1204B TTFPM1S (attachment tool)- - Included TNDS2 TXE2, - -
(PE symbol sticker) JTXE3TTGA20 TTB3 (upper stage) TRC21 (DIN rail) Set use of TXE2 and TJ164B TTS1S (conjunction screw)
TTB2 (lower stage) TRC22 TXDA2, TXDA2M TXE2C is recommended TJ1204B TTFPM1S (attachment tool)TRC23 TNDS2, JXDB
TTGA40 TXB2 (upper stage) (DIN / C type dual purpose) JTJ264B TTS2 (conjunction screw)TTB2 (lower stage) TRDA2, TRDA2M TTFPM1S (attachment tool)
TTA1SK TTB1S TRC21 (DIN rail) Set use of TXE2 and TJ161 TTS1S (conjunction screw)TTB1SL TRC22 TXDA2, TXDA2M TXE2C is recommended TJ1201 TTM1S (attachment tool)
TRC23 TNDS2, JXDB(Kasuga C type rail)
TTA2K TXB2 (upper stage) TRDA2, TRDA2M TJ262 TTS2 (conjunction screw)TTB2 (lower stage) (DIN / C type dual purpose) TTM1S (attachment tool)
TRD2, TRD2MTTJA8 TXJB8 (upper stage) TRC11 TXJD15A Note TTJE1 TJ161 TTS8 (conjunction screw)
TTJB8 (lower stage) TRC12 TJ1201 TTM1S (attachment tool)TRC13
Name sticker
Cover
End plate
Stopper
Removal tool
Short bar
TX Series
Rail
Stopper
TFP Series
Assembly part(attachment tool)
Assembly part(conjunction screw)
TT Series
Select the accessory that is applicable to terminal unit. Furthermore, the accessories (rail support, removaltool etc.) that enable the use of terminal block more conveniently are also prepared.
Completed product ofassembled terminalblock is available.
Completed product ofassembled terminal blockis available.
Completed product ofassembled terminal blockis available.
TX 7
TX 10 S M3TX 10 STX 10TX 20TX 30TX 50TX 60TX 100TX 150TX 200TX 300TX 400TX 600TXU 7TXU 10 S M3TXU 10 STXU 10TXU 20TXU 30TXU 50TXU 60TXU 100TXW100TXW150TXW200TXW400TFP 15TFP 20TFP 40TFP 80TTFP 203TTFP 2035TFE 20TFE 40TTG 203TTG 20U3TTG 2035TTG 20U35TTG 40TTG 40 UTT 10 SKTT 10 SUKTT 10 SK M3.5TT 10 SUK M3.5TT 20 KTT 20 UK
TTJ 8TTJ 8 U
Rail Type Terminal Block Accessory
Note TTJ8 and TTJ8U can use TXDA and TNDS rails (stopper is TXE2) other than TXJD15A rail.
List of applicable accessories (TX, TXU, TXW, TFP, TTG, TTJ, TT Series)
C_04-工業用端子台.p65 06.7.26, 2:34 pmPage 141 Adobe PageMaker 6.5J/PPC
142
Terminal Blocks
Termin
al Blo
cks
Cover
Rail
Stopper
TN SeriesCover
Stopper
Rail
Name sticker
TR Series
Cover
Name sticker
Rail
Stopper
TXJ Series
Terminal unit End plate Cover Name sticker Rail Stopper Short bar Assembly part
Not TXB1 Included (DIN rail) (for DIN rail) - -necessary TXB1L (TRC21, TRC22, TXDA2, TXDA2M TXE1
TRC23 can be TNDS2 TXE2used) JTXE3
(DIN / C typeTRB3, TRB3L dual purpose)TRB6 TRDA2, TRDA2M (for C type)TRB10N TRE1TRB20N,TRB20N03TRB40N,TRB40N03
TRA1K TRB1 TRC11 (Kasuga C type (for Kasuga C TJ161, TJ1201 -TRA1NK TRB1L TRC12 rail) type) TJ162, TJ1202TRA2K TRB2 TRD2, TRD2M TRE1 TJ262TRA2NK TRB2LTRA3K TRB3 TRC21 (DIN / C type (for DIN rail) -TRA3NK TRB 3L TRC22 dual purpose) TXE1, TXE2TRA6K TRB6 TRDA2, TRDA2MTRA6NKTRA10K TRB10NTRA10NK TRB10N03- TRB20N
TRB20N03 TRB40N
TRB40N03TXJA7 TXJB7 TXJC51 (DIN15mm rail) TXJE1 TJ7201 -
TXJB7L TXJC52 TXJD15ATXJA8 TXJB8 TRC11 TJ161, TJ1201
TXJB8L TRC12
TN 13 SBKM3TN 13 SBK M3.5TN 12 BKTN 13 BKTN 20 BKTN 30 BKTN 60 BKTN 100 KTN 200 K
TN 400 K
TR 10 SKTR 10 KTR 20 K
TR 30 K
TR 60 K
TR 100 K
TR 200 K
TR 400 K
TXJ 7
TXJ 8
Terminal unit End plate Cover Name sticker Rail Stopper Short bar Assembly part
TXLUA1 TXB2 TRC21 (DIN rail) (for DIN rail) TJ164B, -TXB2L TRC22 TXDA2, TXDA2M TXE1 TJ1204B
TRC23 TNDS2, JXDB TXE2JTXE3 TJ262B
TXFA1 - Included (DIN / C type dual - -purpose)
TXFA1 TXB1, TXB1L TRC21 (for Kasuga C - -TXWA10 TRB10N TRC22 (Kasuga C type type) - -TXWA20 TRB20N TRC23 rail) TRE1
TRD2, TRD2M
This is the list of applicable accessories for special purpose terminal block rail type.
TXLU 10 S
TXLU 20TXF 10TXF 10 NTXS 20TXW100DTXW200D
List of applicable accessories (TN, TR, TXJ Series)
List of applicable accessories (TXLU, TXF, TXS,TXW-D Series)
C_04-工業用端子台.p65 06.7.26, 2:34 pmPage 142 Adobe PageMaker 6.5J/PPC
143
Terminal BlocksTerm
inal B
locks
This is used for terminal of assembled terminal unit.When two sheets are used for both ends, they alsowork as stopper of sticker. Furthermore, it is also pos-sible to use one sheet for one side by bending andremoving the lug for pressing sticker.
(for TR Series)Use one sheet for the terminal of assembled terminalunit. However, it is not necessary for TR200 andTR400. As the N type has no groove for leading namesticker, it is possible to use two sheets for both endsto use them as stopper of sticker too.
When one sheet is usedfor one side
When two sheets areused for both sides
Applicable unit Thickness General(mm) weight
TX7 to TX20 3 2.5gTX30 3 4gTX50 3 4gTX60 3.5 5.5gTX100 4 11gTX150, TXW150 4 14gTXU7 to TXU20 3 2.5gTXU30 3 4.5gTXU50 3 4.5gTXU60 3.5 6gTXU100 4 14gTXF10, TXF10N, TXS20 3.5 10gTXW100, TXW100D 4 14gTXW200, TXW200D 4 17gTXW400 5 30gTT10SK, TT10SUK 8 with two sheets 12.7gTT20K, TT20UK 11 with two sheets 22gTTJ8, TTJ8U 8 with two sheets 11gTXJ7 2.5 1.5gTXJ8 2.5 2gTFP15, TFP20 3 2.5gTFP40 3 5gTFP80 3 7gTTFP203, TTFP2035 8 with two sheets 13gTTG203, TTG2035, 8 with two sheets 13gTTG20U3, TTG20U35TTG40, TTG40U 10.5 with two sheets 22gTXLU10S, TXLU20 3.5 3g
Type name
TXA 1TXA 3TXA 5TXA 6TXA 10TXA 15TXUA 1TXUA 3TXUA 5TXUA 6TXUA 10TXFA 1TXWA 10TXWA 20TXWA 40TTA 1 SKTTA 2 KTTJA 8TXJA 7TXJA 8TFPA 20TFPA 40TFPA 80TTFPA 20TTGA 20
TTGA 40TXLUA 1
Type name Applicable unit Thickness GeneralThere is a groove There is no groove (mm) weightfor sticker for sticker
TR10K, TR10SK 2 2gTR20K 2 2gTR30K 3 2.5gTR60K 3 5gTR100K 3.5 10g
End plate
TRA 1 K TRA 1 NKTRA 2 K TRA 2 NKTRA 3 K TRA 3 NKTRA 6 K TRA 6 NKTRA 10 K TRA 10 NK
C_04-工業用端子台.p65 06.7.26, 2:34 pmPage 143 Adobe PageMaker 6.5J/PPC
144
Terminal Blocks
Termin
al Blo
cks
This cover is made from transpar-ent polycarbonate, and set-in type.For TX100 or greater models, 3Pdedicated products are also avail-able. TT10SK type can be at-tached to upper stage only, TT20Kand TTJ8 types can be attachedto both of upper stage and lowerstage.
Type name Applicable unit Width x length(mm)
TXS20, TN13SBK, TN12BK, TN13BK, 37× 500TN20BK 37× 1000TX7, TX10S, TX10, TX20, TXU7, TXU10S, 38× 500TXU10, TXU20, For 2-stage terminal bolck upper stage 38× 1000(TT20K, TT20UK, TTG40, TTG40U), TXLU10S, TXLU2TR10K 35.5× 500
35.5× 1000TR20K 40× 500
40× 1000TX30, TX50, TXU30, TXU50, TN30BK, 49× 500TR30K 49× 1000TX60, TXU60, TN60BK, TR60K 56× 500TX100, TX150, TXU100, TXW100, 75× 500TXW150, TN100K, TR100KTX200, TX300, TXW200, TN200K, TR200K 87× 500TX400, TXW400, TX600, TN400K, TR400K 124× 500TX100, TXU100 (dedicated to 3P), TR100K (dedicated to 3P) 75× 85TX200 (dedicated to 3P), TR200K (dedicated to 3P) 87× 117TX300 (dedicated to 3P) 87× 138TX400 (dedicated to 3P), TR400K (dedicated to 3P) 124× 186TX600 (dedicated to 3P) 124× 192TT10SK, TT10SUK 31.5× 500TT20K, TT20UK, TTG20, TTG20U, 10.4× 500TTG40, TTG40U for lower stageTTG203, TTG2035, TTG20U3, TTG20U35 34× 500TXJ8, TTJ8, TTJ8U for upper stage 29.5× 500
29.5× 1000TTJ8, TTJ8U for lower stage 14× 500TXJ7 24.5× 500
24.5× 1000
TXB 1TXB 1 LTXB 2TXB 2 L
TRB 1TRB 1 LTRB 2TRB 2 LTRB 3TRB 3 LTRB 6TRB 10 N
TRB 20 NTRB 40 NTRB 10 N 03TRB 20 N 03TRB 30 N 03TRB 40 N 03TRB 60 N 03TTB 1 STTB 2
TTB 3TXJB 8TXJB 8LTTJB 8TXJB 7TXJB 7L
Cover
C_04-工業用端子台.p65 06.7.26, 2:34 pmPage 144 Adobe PageMaker 6.5J/PPC
145
Terminal BlocksTerm
inal B
locks
It is possible to set the terminal No. etc. on it. As the partitioningline is printed for TXC type, it is possible to attach it to terminalunit after setting a seal on it, and it is very convenient. TXC
TRC
Type name Dimensions (mm) Applicable unit Material LWidth Width of TX / TT Other series (length)A partitioning line W Series9.5 Front 7.3 TX 7 - Polyvinyl chloride 5m
Back 8 TX 10S (Thickness 0.5mm)9.5 Front 7.3 TX 7 Polypropylene 5m
Back 8 TX 10S (Thickness 0.5mm)9.5 Front 8 TX 10S Polyvinyl chloride 5m
Back 9.5 TX 10 (Thickness 0.5mm)9.5 Front 8 TX 10S Polypropylene 5m
Back 9.5 TX 10 (Thickness 0.5mm)9.5 Front 11.5 TX 20 Polyvinyl chloride 5m
Back 14.5 TX 30 (Thickness 0.5mm)9.5 Front 11.5 TX 20 Polypropylene 5m
Back 14.5 TX 30 (Thickness 0.5mm)9.5 Plain TX / TT TFP Fiber 5m
Series TTG (Thickness 0.5mm) 230mEvery model TR Polyvinyl chloride 5m(other than Series (Thickness 0.5mm) 100mTTJ8) (TR30 or Polypropylene 5m
greater) (Thickness 0.5mm) 100m6.5 Plain TTJ8 TR10SK Fiber 5m
TTJ8U TR10K (Thickness 0.5mm) 230mTR20K Polyvinyl chloride 5m
(Thickness 0.5mm) 100mPolypropylene 5m
(Thickness 0.5mm) 100m5.5 Plain TXJ7, TXJ7Z Fiber 5m
(Thickness 0.5mm)Polyvinyl chloride 5m(Thickness 0.5mm)Polypropylene 5m
(Thickness 0.5mm) 100m
TXC 07
TXC 073
TXC 1
TXC 13
TXC 2
TXC 23
TRC 21TRC 21 L230TRC 22TRC 22 L100TRC 23TRC 23 L100TRC 11TRC 11 L230TRC 12TRC 12 L100TRC 13TRC 13 L100TXJC 51
TXJC 52
TXJC 53TXJC 53 L100
For multi-rail type terminal block, it is possible to at-tach it to four types of rails (DIN35mm width madefrom aluminum, made from steel, C type, DIN / Ctype dual purpose).
Type name Type Material Height Length General(mm) (mm) weight
(x1)DIN35mm Aluminum 7.5 1005 175gwidth rail 2010 350g
Steel 10 1005 365gAluminum 7.5 990 177g
C type rail Steel 10 1005 455g 2010 910g
Rail for DIN / Aluminum 10 1005 215gC type dual 2010 430gpurpose Aluminum black 10 1005 215g
AlumiteDIN15mm Aluminum 5 1005 64gwidth rail
TXDA
TNDS
TRDA
JXDB
TRD Remarks1. Use the steel rail after applying rust resisting coating material to cutsurface.
2. When you use the rail leaving long, the intensity increases adequatelyby securing a few points not only both ends.
TXJD15A
TXDA 2TXDA 2 MTNDS 2JXDBTRD 2TRD 2 MTRDA 2TRDA 2 MTRDA 2 K
TXJD 15 A
Name stickerDashed line
Rail
Remarks1. The name sticker made from polyvinylchloride is planned to be integrated into theone made from polypropylene.
2. If you print with Kasuga Markie on TXJ53,TRC13, TRC23, use the ink ribbon MK-880HRB. With this ribbon, it is possible toprint on mark tube.
CAUTIONS1. When you use the one made from fiber(TRC21, TRC11), it is not possible to printwith auto printer. Stamp with rubber stampand apply it with tape.
2. When the number of pins increases, as theTXC type may generate gap because thetolerance is counted, please use itreferencing the table below.
Acceptable maximum number ofunits of sticker with partitioning lineTerminal unit Number of units
TX 7, TX10S 60TX10 50TX20 40TX30 30
C_04-工業用端子台.p65 06.7.26, 2:34 pmPage 145 Adobe PageMaker 6.5J/PPC
146
Terminal Blocks
Termin
al Blo
cks
Attach this to both ends of assembled terminal unitto fix the unit to rail firmly. It is also possible to at-tach or remove from surface of rail.
TXE1 TXE2 TXE4
TXE2C TRE1 TXJE1 TWE1
Assembly part(attachment tool)
Assembly part(conjunction screw)
TT Series
Type Application General weightname per one piece
DIN35mm width rail Slim type 10.5g(TXDA, TNDS, JXDB, Standard 20gTRDA) supported Large type 21g
2 points fixing 12g(accessory plate for TXE2) 8gC type rail supported 12g(TRD, TRDA)DIN15mm width rail 4g(TXJD15A) supported
TWE 1TXE 1TXE 2TXE 4TXE 2 CTRE 1
TXJE 1
Product name Type name ApplicationConjunction For TT10S 3 to 5 units (length 54mm)screw TTG203 6 to 10 units (length 94mm)
TTG20U3 11 to 15 units (length 134mm)TTG2035 16 to 20 units (length 174mm)TTG20U35 21 to 25 units (length 214mm)TTFP203 26 to 30 units (length 254mm)TTFP2035For TT20 3 to 5 units (length 76mm)
6 to 10 units (length 134mm)11 to 15 units (length 192mm)16 to 20 units (length 250mm)21 to 25 units (length 307mm)26 to 30 units (length 365mm)
TTG40 3 to 5 units (length 75.5mm)TTG40U 6 to 10 units (length 135.5mm)
11 to 15 units (length 184mm)16 to 20 units (length 244mm)21 to 25 units (length 306mm)26 to 30 units (length 350mm)
For TTJ8 3 to 5 units (length 56mm) 6 to 10 units (length 97mm)
11 to 15 units (length 136mm)16 to 20 units (length 176mm)21 to 25 units (length 216mm)26 to 30 units (length 256mm)
Attachment TT10SK One piece is used for both sidesbracket TT20K
For TTFP, One piece is used for both sidesFor TTG
TTS 1 S 05TTS 1 S 10TTS 1 S 15TTS 1 S 20TTS 1 S 25TTS 1 S 30
TTS 2 05TTS 2 10TTS 2 15TTS 2 20TTS 2 25TTS 2 30TTS 4 05TTS 4 10TTS 4 15TTS 4 20TTS 4 25TTS 4 30TTS 8 05TTS 8 10TTS 8 15TTS 8 20TTS 8 25TTS 8 30TTM 1 S
TTFPM 1 S
Stopper
RemarkAs TXE2 has a unit-fixing bracket, it is possible to fix the terminal firmly.Especially, it is optimum for large type terminal block of TX30 orgreater. For TT Series (2-stage type terminal block), it is fixed morefirmly by attaching TXE2C (accessory plate) additionally.
Conjunction screw and attachment bracket forassembling (assembled terminal block) 2-stagetype terminal block without rail.[conjunction screw (nut is included) x10, at-tachment bracket x10 included]
Assembly part
For external dimensions and cut dimensions ofconjunction screw, please refer to terminal blockaccessories.
C_04-工業用端子台.p65 06.7.26, 2:34 pmPage 146 Adobe PageMaker 6.5J/PPC
147
Terminal BlocksTerm
inal B
locks
This is a transfer bracket convenient for common wiring. There are threetypes (2-pin, 6-pin, and 20-pin), and each type can be cut for required num-ber of pins by wire cutter etc. The material is brass nickel plating.You can select the short bar from three types below.
・A type: type without coating・B type: type polyvinyl chloride is coated on A type・C type: type bending is processed for A type
Remarks1.Here provides accessories applicable to rail type terminal block. For the short bars that are notprovided here, please refer to “Terminal Block Accessory”.
2.Use the short bar so that the total current of every pin which short-circuits is conducting current or lessof short bar.
TJ161C (bending)
TJ161B (with coating)
TJ161A (standard)
Type name No. Type Applicable terminal block Conducting General
of pins Rail type terminal block Assembled terminal block current weight
TJ 161 A 6 Without coating TT10SK, T10SUK, TTJ8, TC10S, TC10SU, TEN8, TEU8 20ATJ 161 B 6 With coating TT10S, TT10SUKM3.5,TJ 161 C 6 Bending TTJ8U, TR10SK, TXJ8TJ 1201 A 20 Without coating
TJ 1201 B 20 With coating
TJ 162 A 6 Without coating TX10, TXU10, TR10K TXM10, TXUM10 20ATJ 162 B 6 With coating
TJ 162 C 6 Bending
TJ 1202 A 20 Without coating
TJ 1202 B 20 With coating
TJ 163 A 6 Without coating - T10, TL15 20ATJ 163 B 6 With coating
TJ 163 C 6 Bending
TJ 164 A 6 Without coating TX10S, TXU10S, TFP20, TXM10S, TXUM10S 20ATJ 164 B 6 With coating TTFP203, TTFP2035,TJ 164 C 6 Bending TTG203, TTG20U3,TJ 1204 A 20 Without coating TTG2035, TTG20U35,TJ 1204 B 20 With coating TXLU10TJ 261 A 6 Without coating TR20K TEN11, TEU11 30ATJ 261 B 6 With coating
TJ 261 C 6 Bending
TJ 262 A 6 Without coating TX20, TXU20, TT20K, TXLU20 TXM20, TXUM20 30ATJ 262 B 6 With coating
TJ 262 C 6 Bending
TJ 263 A 6 Without coating - T20, TL25 30ATJ 263 B 6 With coating
TJ 263 C 6 Bending
TJ 762 A 6 Without coating TX7, TXU7 TXM7, TXUM7 20ATJ 762 B 6 With coating
TJ 762 C 6 Bending
TJ 7202 A 20 Without coating
TJ 7202 B 20 With coating
TJ 7203 B 20 With coating TFP15 TFPM15 20AJTJ 264 B 6 With coating TFP40, TTG40, TTG40U TFPM40, TTGM40, TTGM40U 40AJTJ 802 B 2 With coating TFP80, TX50, TXU50 TFPM80, TXM50, TXUM50 80ATJ 7201 A 20 Without coating TXJ7 TEN7 20ATJ 7201 B 20 With coating
JTJ 302 B 2 With coating TX30, TXU30, TR30K TXM30, TXUM30, T30, 50ATL35, TEU14
JTJ 602 B 2 With coating TX60, TXU60, TR60K TXM60, TXUM60, TC60 90AJTJ 1002 B 2 With coating TX100, TXU100, TR100K TXM100, TXUM100 130A
--------------------------------------
--
Short bar
C_04-工業用端子台.p65 06.7.26, 2:35 pmPage 147 Adobe PageMaker 6.5J/PPC
148
Terminal Blocks
Termin
al Blo
cks
This is a tool that removes the unit attached to DIN rail (TXDA2, TNDS2).This can be used for TX7 to TX20 and TXU7 to TXU20.
Product name Type name Applicable unitUnit removal tool TX7 to 20, TXU7 to 20TXK
Application Type name General weightper one piece
type 45° Height 23mm 30gTrapezium Height 17mm 25g type Height 50mm 60g
Height 90mm 90gHeight 130mm 120g
type 30° Height 50mm 60gHeight 90mm 90gHeight 130mm 120g
TRGA TRGB
TRGC1 TRGC1A
TRGATRGBTRGC 1TRGC 2TRGC 3TRGC 1 ATRGC 2 ATRGC 3 A
Unit removal tool
This makes wiring easy by suspending the rail or changing the attachmentangle.With this, it is possible to attach the terminal block to corner of board ornarrow attachment space.
Rail support
Remarks1. TRGC1A, TRGC2A, and TRGC3A are the one that the railattachment parts of TRGC1, TRGC2, and TRGC3 are bent by30°.
2. As there is a hole of φ 4.3 (prepared hole of M5) is allocatedat the neck part of TRGC3 and TRGC3A, it can be used as anattachment hole of rail or other equipment.
C_04-工業用端子台.p65 06.7.26, 2:35 pmPage 148 Adobe PageMaker 6.5J/PPC