MTC-3 Series 3 In 1 Controller Timer + Counter + Tachometer · Panel Panel Type Type DIN Rail Type...
2
Panel Type Panel Type DIN Rail Type DIN Rail Type www.maxthermo.com MTC-3 Series 3 In 1 Controller Timer + Counter + Tachometer MTC-3 Series 3 In 1 Controller Timer + Counter + Tachometer Multi-Function LCD Digital Timer / Counter / Tachometer MAXIMUM ELECTRONIC CO., LTD MAXIMUM ELECTRONIC CO., LTD MAXTHERMO - GITTA GROUP CORPORATION MAXTHERMO - GITTA GROUP CORPORATION
Transcript of MTC-3 Series 3 In 1 Controller Timer + Counter + Tachometer · Panel Panel Type Type DIN Rail Type...
Panel TypePanel Type
DIN Rail TypeDIN Rail Type
www.maxthermo.com
MTC-3 Series 3 In 1 ControllerTimer + Counter + TachometerMTC-3 Series 3 In 1 ControllerTimer + Counter + TachometerMulti-Function LCD Digital Timer / Counter / Tachometer
MAXIMUM ELECTRONIC CO., LTDMAXIMUM ELECTRONIC CO., LTDMAXTHERMO - GITTA GROUP CORPORATIONMAXTHERMO - GITTA GROUP CORPORATION
2010/03MTC-3
MTC-3 Series Timer + Counter + Tachometer 3 In 1 ControllerMTC-3 Series Timer + Counter + Tachometer 3 In 1 Controller
Support RS-232/RS-485/RS-422communication Interface modeA variety of alternativecommunication format:Communication rate: 1200~57600bps,Date Bit: 7/8bit,Parity check: N/O/E,Stop bit: 1/2bit
Quick setting and real time monitoring
A.Maxtech：Timer / Conuter/ TachomerB.Functions3 - Timer / Conuter/ Tachomer all in 1C.Output type1 - Relay2 - Transistor
D.Communiction1 - None2 - RS-2323 - RS-4224 - RS-485E.Installation1 - DIN rail2 - Panel48x48mm
F.PowerA - AC100~240V, 50/60 HzD - DC24V / AC24VAccessories1 - MTCC–015232M (RS-232 Communiction cable)2 - MTCC–015422M (RS-422 Communiction cable)3 - MTCC–015485M (RS-485 Communiction cable)
MAXTHERMO - GITTA GROUP CORPORATIONMAXIMUM ELECTRONIC CO., LTD
Note 1.The mounting panel thickness should be 1.5mm.2.To allow easier operability, it is recommended
that adapters are mounted so that the gap between sides with hooks is at least 20mm.
3.It is possible to mount counters side by side, but only in the direction without the hooks.
Panel Type
Module TypeUnit mm
Dimensions with flush mounting adapter Use a standard 35mm DIN rail for installation
60.2553
55.5
110.598
12.57.25
48
53.6
90 44.18
11.8211.15
53.6
9.41 17.2 20.6 10.0
DIN rail 35mm
35.8
4
4
6 5 4 3 2 1
OUT1 OUT2
100 to 240 VAC50 / 60 Hz
COM
12V
GATE(CP1)RESET2
RESET1SIGNAL(CP2)
12 11 78910
1 2 3 4 5 6 7 8 9GATE
CP1CP2
RESET2RESET1
SIGNAL
101112131415161718OUT1
12V
OUT2
100 to 240 VAC50 / 60 Hz
2 3 4
567
8910111213
1
AB
K/P Range
MSH
MODE
RESET
RST1 RST2 OUT1 OUT2
135
24614
15
16
17
Reset IndicatorControl Output IndicatorPresent Value (character height: 9 mm)Display time unit (no display if choosing counter)Set Value (character height: 4mm)The first setting keyThe second setting keyThe third setting key
The fourth setting keyThe fifth setting keyThe sixth setting keyReset key(resets present value and output)Mode key (changes modes and setting items)Key Protection Indicator(the default value is OFF)Set value (Range) A,B display
2
3 45
6
7
8
9
10
11
12
13
1
14
15
16
17
MTC-3 Series
MODBUS ASCII
NoteAC100-240V/AC24V/DC24V, threeoptional power supply.
12VDC external supply power candrive the external optical sensors,such as encoder, infrared switches etc.
Up to 65mm
Up to 20mm
45mm
65mm
45mm
45mm
+ 0.6- 0
+ 0.6- 0
+ 0.6- 0
