Post on 18-Jul-2020
PROJECTS
Toll-free: 1-800-828-7159 www.SunshineGlass.comI-1
4/2/2018
CAST METAL BODIESMonster MetalsIntricate designs and an attention to detail separate these castings from the rest. Some assembly required using either solder or glue (see Adhesives on p. J-6). All include patterns and instructions. Sizes listed are approximate finished size, unless noted otherwise.
#FA01 Jasmine
3½ H x 2”W(scepter not included)
#FA02 April
2 W x 3”H w/out wings
#FA05 Sarah
1¼ H x 4”L w/out wings
Creative CastingsImaginative and graceful cast bodies for nymphs, dragons, angels and butterflies await your addition of wings to come alive! All include patterns and instructions. Creative Castings is the Creative choice for quality castings. Sizes listed are approximate casting size.
All Monster Metals and Creative Castings are now made from a special lead-free alloy. This new alloy is lighter, stronger and has a shinier finish, while being more healthy and environmental sensible. Lead-Free!
#10200 Flying Dragon
4½”
#10201 Butterfly Body
3½”
#10203 Hummingbird
2½”
#10208 Nativity Scene
4”(includes star w/ amber
jewel and staff)
#10209 Pig2”
#10210 Gargoyle
1½”
#10230 Bejewelled Dragon
5”
#10231 Woodland Nymph
2”
#10233 Butterfly Lady
4”
#10240 Butterfly Lady w/ Scarf
5¾”
#10241 Butterfly Princess
4”
METAL CASTINGSSection I
PROJECTS
Call Toll-Free 1-800-828-7159
PROJECTS
Toll-free: 1-800-828-7159 www.SunshineGlass.comI-2
4/2/
2018
Toll-free: 1-800-828-7159 www.SunshineGlass.com
METAL CASTINGS
Flight Into FantasyKits come with cast body, plus wire for details and full size patterns for cutting wings etc. Because of their popularity, the kits are now available in many new styles, including the mini hovering hummingbird sold singularly, or in sets of two. Sizes listed are approximate casting size.
#10851 Soaring Eagle
3¾”
#10860 Flying Dragon
4-3/8”
#10861 Sitting Dragon
3¾”
#1090 Hummingbird Body
3½”
#1091 Fairy Lady
4¾”
#10911 Victoria
5¼”
#10912 Sunshine
4½”
#1092 Small Butterfly
2¼”
#1093 Large Butterfly
3½”
#10962 (pack of 2) Small Hovering Hummer
2¼”
#10963 (pack of 2) Small Flying Hummer
2”
#1097 Ultimate Hummingbird
3”
#1099 Angel of Happiness
4-3/8”
#10992 (pack of 2)Small Choiring Angel
3-1/8”
CRYSTAL EMBELLISHMENTS give your lead bodies life with sparkling crystal eyes you can glue on. These faceted, flat back crystals add the detail that makes a difference! The 2mm black dot shown at right is actual size, while the illustration of facets is enlarged. Available in packs of 12, or an assorted pack containing two of each color.
Actual Size
CRYSTAL EMBELLISHMENTSCAT # DESCRIPTION9030 Assorted9031 Capri Blue9032 Aurora Borealis9033 Emerald9034 Topaz9035 Ruby9036 Amethyst
Explore the Fantastical World of Jillian Sawyer
Dragons, faeries, mermaids and more await you in this outstanding collection of patterns from Jillian Sawyer.
Sawyer’s remarkable use of color texture and fanciful designs make these images seem to come alive ... even though they are only creations of the artist’s imagination.
DISCONTINUED
LIMITED STOCK AVAILABLE
DISCONTINUED
LIMITED STOCK AVAILABLE
Section I
PROJECTS
Visit Us On The Internet: www.sunshineglass.com
Toll-free: 1-800-828-7159 www.SunshineGlass.com
PROJECTS
Toll-free: 1-800-828-7159 www.SunshineGlass.comI-3
4/2/2018FILIGREES: ANGELS
ANGEL ACCESSORIESWings, Halos, Trinkets, ... and more continue the angels theme that are so very popular in the stained glass craft. To find lots of 3-dimensional angel patterns that work well with all the goodies found below see Dimensions of Christmas (#1208).
Angel Wings & AccessoriesThese heavy gauge brass angel wings and accessories compliment any standing or flying angels. Use as is, or tin (coat with solder) and attach to stained glass wings for a great filigree look. Accessories for your angels follow, including halos, skirt and sleeve borders, instruments and trinkets. Full size patterns for angels are included with angel wings.
WINGS - sold by the pair. Shown approximately 2/3 actual size
#1061 #1065
HAND CAST INSTRUMENTS give you a choice of five lead cast instruments for your angels to “play.” Illustrations shown are approximate actual size.
#10610 Long Horn
4”
ETCHED BRASS DRAGONFLY FILIGREES (#4200) cleanly etched on heavy brass sheets are available for your projects and lamps. Illustrations are approximately 1/3 actual size.
Nite Lite BasesNite lites are fun little projects that go together quickly and make great home accents. All nite lite bases INCLUDE a bulb.NITE LITE BASES are UL listed bases with polarized prongs and a 4 watt bulb. Available in:• Ivory (#0977-IV)• White (#0977-WT)
#0977-IV Ivory
#0977-WT White
NITE LITE CLAMPS are the best! These solid brass clamps have a small nut and screw to hold the shade securely to the base.• Each (#3060)• Pack of 10 (#3061)• Pack of 25 (#3062)• Pack of 50 (#3063)• Pack of 100 (#3064)
MOSAICART™ GROUT is specially formulated for glass mosaics for greater bond and compressive strength. This sanded grout is packaged in convenient 2 lb resealable plastic tubs. Use the White and the Mosaic Stone Colorants to create your own custom colors. Instructions are included.
#MS 0580 WHITE
#MS 0581 BLACK
#MS 0582 BONE
#MS 0583 SILVER
#MS 0584 TERRACOTTA
COLORANT and GROUT PIGMENT can be used to color cement, concrete or grout. Includes instructions on varying the color intensity (High, Medium or Low).• 3 oz packets color 90 cups of ‘Crete at medium color
intensity. • One lb package will color approximately 480 cups of
cement at medium color intensity. Order from chart below.
MOSAIC STONE COLORANTSCOLOR 3oz CAT# 1lb CAT#
Charcoal MS 0275 MS 0276ORDERING INFORMATION: Please be sure to use the correct Catalog Number for the size packet you are looking for.
DISCONTINUED
LIMITED STOCK AVAILABLE
DISCONTINUED
LIMITED STOCK AVAILABLE
Section I
PROJECTS
Call Toll-Free 1-800-828-7159
PROJECTS
Toll-free: 1-800-828-7159 www.SunshineGlass.comI-4
1/25
/201
9
Toll-free: 1-800-828-7159 www.SunshineGlass.com
FAN BASES
FAN AND DISPLAY BASESFAN LAMPS make attractive accent lights and night lights. The Book of Fans (#1393) has plenty of design ideas. All fan and project bases have complete cord/switch/socket assembly included. You may use either 40 watt candelabra bulbs (#6498) or 4 watt Nite Lite bulbs (#6497). Bulbs are NOT included with Fan Lamp Bases. Find bulbs page H-8 of the Lamp Hardware section.
ANTIQUE BRASS FAN BASE (#4195) is your basic fan base. Simple and elegant cast metal with antique brass finish.
FAN BASE CORD SET (#4187) is handy for those who make their own fan bases, or as a replacement cord should the cat chew up the original. Fully wired with plug, switch, socket and clip to hold socket on base.
ART DECO FAN BASES need only a striking piece of glass behind the figures to create a dramatic lighting fixture. These bases are finished in antique brass and are slotted to hold your glass panel. Order using the catalog numbers below each illustration.
#41860 Nude Art Deco
10” H
#41861 Flapper8½” H
#41863 Woman on Wave
8” H
#41864 Two Dancers
8” H
TABLE LANTERN KIT (#4188) contains the electrical parts needed to make up your Table Lantern as described in the Aanraku book series: Table Lanterns 1 (#14135), Table Lanterns 2 (#14137) and Table Lanterns 3 (#14138). Each kit includes a 3 way spider, 3 rods, socket, threaded rod, locknut, cord, plug and inline switch.
Wooden base not included.
HELPFUL HINT: We recommend that you purchase your frame BEFORE you make your panel to assure proper fit. Installing your work will be easier if you border your panel with 3/8” or 1/4” flat “H” lead came which can be easily trimmed if necessary.
BOOKENDS - the simple style matches any decor and features a 6” high x 4½” wide groove to insert your stained glass art. Stable design (5¾ long x 3½ wide x 7-3/8” high) keeps books orderly for an enjoyable and functional display. Sold in sets of two. Artwork not included. Two finishes available:• MEDIUM CHERRY FINISH (#0960C) • NATURAL PINE FINISH (#0960N)
PUSH POINTS (box of approx. 100 points - #0844) are used for holding panes of glass in wooden sashes. Drive with putty knife or broad tipped screwdriver.
Shown approximate actual size
EASEL BACKS are constructed of sturdy 1/16” thick pressed board. Features two hanging tabs and an easel leg so that your stained glass picture frame can be placed or hung either in portrait or landscape fashion.The easel leg is extended to allow for the addition of stained glass borders to your frame of between 1 and 1½”.• 3½ x 5” (#9490)• 4 x 6” (#9491)• 5 x 7” (#9492)• 8 x 10” (#9493)
Section I
PROJECTS
Visit Us On The Internet: www.sunshineglass.com
Toll-free: 1-800-828-7159 www.SunshineGlass.com
PROJECTS
Toll-free: 1-800-828-7159 www.SunshineGlass.comI-5
4/2/2018FRAMING STOCK
FRAMING STOCKFor do-it-yourselfers try Northern Hardwood’s oak framing stock and specialized stained glass mounting hardware. All framing stock is Red Oak, specially selected for quality. The strength of oak and the clean lines of this framing stock will give your panel the support it needs without attracting attention away from your glass. This framing stock is made to be seen from either side, as there are no moulding strips to detract from appearances.
FRAMING STOCK has a groove 3/8” deep by 5/16” wide to accept your stained glass panel. The 5/16” width of the groove allows for a lead or zinc came border on your piece. The depth of the groove lets you use 1/4” zinc or lead U came without having the metal show. If you wish to have a metal “reveal” or inner border showing, use 1/2” or wider U came. See drawings for cross sections of framing stock and outside dimensions. Sold in six foot lengths.• NARROW (#1600) face width is 1”, for smaller panels• WIDE (#1605) face width is 1 3/8”, most popular• EXTRA WIDE (#1610) face width is 2”, for large panels
COPPER FOIL FRAMING STOCK for copper foil work is also made by Northern Hardwoods. Instead of a 5/16” wide groove for your glass, this special framing has a 3/16” groove. You no longer have to frame your copper foil panels with lead or zinc! This framing stock will also fit pieces of 3/16” plate glass for sandblasted panels.Sold in six foot lengths.• NARROW (#1615) face width is 1”• WIDE (#1616) face width is 1 3/8”
#1610 Extra Wide
#1605 Wide
#1600 Narrow
#1616 Wide
#1615 Narrow
CORNER BRACKETS (#1620) for use with Northern Hardwoods WIDE framing stock (#1605 or #1616) create a professional appearance to your framed panel without all the hard work of making perfect miter cuts. A set of 4 red oak corner brackets (all predrilled), 8 special screws and instructions eliminate the headaches.
FRAMING FOR LEAD OR ZINC CAME
FRAMING FOR COPPER FOIL
SIDE MOUNT CHAIN HOOKS are specially designed to take the stress off the single top piece of the frame and put it on the two side pieces. Brass plated steel, with matching mounting screws. Choose from:• Bent Hook (#1630 – top photo)
Package of 2 with 8 screws to do one frame
• Roll Hook (#1629 – bottom photo) Package of 2 with 8 screws to do one frame
BRASS PLATED FRAMING SCREWS (#1631 - pack of 4) have been specially designed for use with oak framing stock. Made of brass plated steel that is strong, durable and appealing.
WOOD BUTTONS are oak buttons for filling countersunk screw holes. Shown approximate actual size.• Pack of 4 (#1635)• Pack of 25 (#16351)
RETAINING BUTTONS are perfect for holding panels in place in cabinet doors.• Pack of 10 with Screws (#1632)• Pack of 100 with Screws (#16321)
DESIGNER CABINET GLASS CLIPS (#30997) are the best thing when installing glass panels in CABINET DOORS. Simply drill in with screws and paint to match woodwork or cover with molding, if desired. Sold in packs of 25.
MINI DESIGNER GLASS CLIPS are made of clear polycarbon that becomes nearly invisible when installed. Used when installing panels in front of existing windows.• Pack of 25 (#30995)
Section I
PROJECTS
Call Toll-Free 1-800-828-7159