TRUETEMPER.COM INFO@TRUETEMPER.COM

TRIM GUIDE

PROJECT X

SPECIFICATIONS

PARALLEL IRONS

R+ (5.5) 0.370” 0.600” 41.0” 115

S (6.0) 0.370” 0.600” 41.0” 120

X (6.5) 0.370” 0.600” 41.0” 125

PROJECT X FLEX TIP DIAMETER BUTT DIAMETER LENGTH WEIGHT (g)

TAPERED IRONS

R (5.0) 0.355” 0.600” 41.5”-37.0” 110

R+ (5.5) 0.355” 0.600” 41.5”-37.0” 115

X (6.5) 0.355” 0.600” 41.5”-37.0” 125

S (6.0) 0.355” 0.600” 41.5”-37.0” 120

TRIMMING

Please remember the following are general rules for assembling your clubs:

• Taper tip shafts should never be tip trimmed because they are designed to discrete lenghts. Butt trim taper tip shafts to finished length.

• Butt trim shafts to finished length after tip trimming unless specified.

PROJECT X

Trim Guide

3-IRON

1.0”

2-IRON

0.5”

1-IRON

0”

4-IRON

1.5”

5-IRON

2.0”

6-IRON

2.5”

7-IRON

3.0”

8-IRON

3.5”

9-IRON

4.0”

PW

4.5”

Weight Tour

Trajectory Low

Spin Low

X+ (7.0) 0.355” 0.600” 41.5”-37.0” 130

Weight Tour

Trajectory Low

Spin Low