Post on 14-Apr-2016
description
Product Quality Inspections
Intertek's Product Quality Inspections will help to protect your brand and your company’s reputation by minimizing defective merchandise, customer complaints, non-compliant products, and late shipments.
It is imperative that manufacturers verify that the products manufactured, shipped and distributed under their brand
name meet industry, government regulations or their own specific requirements. As an independent, third party
inspection and testing company, Intertek can conduct a variety of on-site inspections to ensure that your brand,
reputation and consumers are protected. Quality Inspections can help manufacturers:
Ensure product safety prior to shipping
Minimize the amount of defective merchandise
Reduce customer complaints due to inferior products
Detect merchandise containing non-standard or non-compliant components
Eliminate late shipments
Based on your specific needs throughout the manufacturing process, Intertek offers a wide variety of quality
inspection services.
Pre-Production InspectionsIntertek will inspect raw materials and components before production begins. After product samples are provided, we
will verify that the factory has ordered the correct materials, components, and accessories. We will also randomly
select and inspect a sample of partially produced products for potential defects, then report our findings to you. If
necessary, we can provide the factory with the technical advice necessary to improve product quality and to minimize
the chance of defects during production.
During Production InspectionsDuring Production Inspections are ideal for shipments of substantial quantities; product lines with continuous
production; strict requirements for on-time shipments; and as a follow-up if poor results were found during Pre-
Production Inspection. Normally, During Production Inspections are carried out when 10-15% of the merchandise is
completed. Intertek will inspect the production batch and examine products in the line for possible defects.
At this point we will identify deviations, if any, and offer advice on corrective measures that will ensure uniformity of
product and quality. We will also re-check any defects discovered during Pre-Production Inspection and confirm that
they have been rectified.
Final Random InspectionsFinal Random Inspections can begin only after production has been completed and all merchandise is ready and
packed for shipment. Through a statistical method set by industry standards, we will sample products to verify
product safety, quantity, workmanship, function, color, size, packing, and more. This ensures that your product is
consistent and compliant with all country, industry, or otherwise-specified requirements and that no critical major or
minor defects appear.
Loading SupervisionDuring Loading Supervision, an Intertek representative will closely monitor the loading process, verify product
quantity, and ensure proper handling of the cargo. Upon completion, the container(s) will be sealed with Intertek tape
as proof of compliance. This service significantly reduces the risk associated with importing cargo.
On-Site CheckingOn-Site Checking can vary depending on a product’s nature and function. The following examinations, however, can
be performed on-site during Pre-Production, During Production, and Final Random Inspections:
Bar Code Check
Earth Continuity Check
Hi-Pot Check
Power Consumption Check
Power On Check
Rub Check by Water
Tape Check by 3M Tape
Transportation Drop Check
Intertek can monitor your entire manufacturing process – from sourcing the right supplier through final delivery of
finished product. With auditors located around the world, with particular concentration in Asia, we’re able to provide
extensive coverage in China, Korea, Malaysia, Thailand, Taiwan, and Vietnam. Our global locations and
accreditations provide you with peace of mind and assurance that your products are the quality you expect and
demand.