Product Quality Inspections

Intertek's Product Quality Inspections will help to protect your brand and your company’s reputation by minimizing defective merchandise, customer complaints, non-compliant products, and late shipments.

It is imperative that manufacturers verify that the products manufactured, shipped and distributed under their brand

name meet industry, government regulations or their own specific requirements. As an independent, third party

inspection and testing company, Intertek can conduct a variety of on-site inspections to ensure that your brand,

reputation and consumers are protected. Quality Inspections can help manufacturers:

Ensure product safety prior to shipping

Minimize the amount of defective merchandise

Reduce customer complaints due to inferior products

Detect merchandise containing non-standard or non-compliant components

Eliminate late shipments

Based on your specific needs throughout the manufacturing process, Intertek offers a wide variety of quality

inspection services.

Pre-Production InspectionsIntertek will inspect raw materials and components before production begins. After product samples are provided, we

will verify that the factory has ordered the correct materials, components, and accessories. We will also randomly

select and inspect a sample of partially produced products for potential defects, then report our findings to you. If

necessary, we can provide the factory with the technical advice necessary to improve product quality and to minimize

the chance of defects during production.

During Production InspectionsDuring Production Inspections are ideal for shipments of substantial quantities; product lines with continuous

production; strict requirements for on-time shipments; and as a follow-up if poor results were found during Pre-

Production Inspection. Normally, During Production Inspections are carried out when 10-15% of the merchandise is

completed. Intertek will inspect the production batch and examine products in the line for possible defects.

At this point we will identify deviations, if any, and offer advice on corrective measures that will ensure uniformity of

product and quality. We will also re-check any defects discovered during Pre-Production Inspection and confirm that

they have been rectified.

Final Random InspectionsFinal Random Inspections can begin only after production has been completed and all merchandise is ready and

packed for shipment. Through a statistical method set by industry standards, we will sample products to verify

product safety, quantity, workmanship, function, color, size, packing, and more. This ensures that your product is

consistent and compliant with all country, industry, or otherwise-specified requirements and that no critical major or

minor defects appear.

Loading SupervisionDuring Loading Supervision, an Intertek representative will closely monitor the loading process, verify product

quantity, and ensure proper handling of the cargo. Upon completion, the container(s) will be sealed with Intertek tape

as proof of compliance. This service significantly reduces the risk associated with importing cargo.

On-Site CheckingOn-Site Checking can vary depending on a product’s nature and function. The following examinations, however, can

be performed on-site during Pre-Production, During Production, and Final Random Inspections:

Bar Code Check

Earth Continuity Check

Hi-Pot Check

Power Consumption Check

Power On Check

Rub Check by Water

Tape Check by 3M Tape

Transportation Drop Check

Intertek can monitor your entire manufacturing process – from sourcing the right supplier through final delivery of

finished product. With auditors located around the world, with particular concentration in Asia, we’re able to provide

extensive coverage in China, Korea, Malaysia, Thailand, Taiwan, and Vietnam. Our global locations and

accreditations provide you with peace of mind and assurance that your products are the quality you expect and

demand.