Huawei GENEX SeriesHuawei GENEX Series

System Structure of GENEX Nastar GSM

Module Description

TransData （ An import

module）

This module is used to import data and it has the following

functions:•Browsing the results of the traffic statistic register•Displaying the information of the current database•Backdating the information of the current traffic statistic task

Nastar (The main module) This module is the access end of Nastar and it has the

following functions:•Querying the customized traffic statistic tasks•Displaying the traffic statistic query results directly•Analyzing the RNO topics

NaConvert (An collection

module）With this module, you can obtain the traffic statistic data from

BAM and upload the data to the server of Nastar.

The structure of GENEX Nastar GSM

Local network mode: Offline mode:

In this mode, it is not required to install a database. In this mode, you can only analyze neighbors and frequencies, but you cannot analyze the traffic statistic.

Online mode:In this mode, it is not required to install a database. In this mode, you can analyze the traffic statistic, neighbors, and frequencies. This mode, however, cannot provide such functions as intelligent reports and performance alarms in the version of server. In addition, it can only analyze the networks in a restricted size.

Customer/Server mode

Installation of the Data Collection Module

Installation of IISControl Panel —— Add/Delete a Component —— Install IIS (Install FTP Service)

Set FTP

Install Naconvert

Install IIS

Installation of the Data Collection Module

FTP SettingControl Panel － Management Tools － Information Service － FTP Site Creation

Installation of the Data Collection Module

FTP User SettingMy Computer — Computer Management — Local Users and Groups —Users

Installation of the Data Collection Module Installation of NaconvertCopy Naconvert.exe and five DLLs (ziparch.dll, SHLWAPI.dll, MFC42.DLL, MSVCRT.DLL, and MSVCIRT.DLL) to \\OMC\BSC\BAM

Copy Naconvert.ini to \\OMC\BSC\public\initfile

Setting of the configuration files

°ü

Installation of Nastar GSM Installation of Nastar Client

Installation of Nastar GSM Installation of GENEX Shared

Installation of SQL Server

The required version: SQL Server Standard+sp3

Setting of SQL ServerStep1: Set the services

Step2: Set Autostart

Step3: Set the connection property

Introduction to the data source

Project parametersThese parameters must contain the parameters: Cell Name, BTS Longitude, BTS

Altitude, LAC, CI, and Directional Angle

Configuration parametersThese parameters must contain the configuration data of the cell. They are saved

in BAM and the path is: \BSC\BAM\dbf

Traffic statistic dataThese parameters are the basis of the performance analysis. They are saved in

BAM and the path is: \BSC\BAM\appsvr\stats\data

Project Par.

Introduction to the Software Interface

Site adding

Site information edition

Site deletion Cell deletion

Cell query

Co-BCCH Co-BSIC check

Idle frequency point check

Spectrum utilization analysis

Frequency point check – according to the frequency

point

Frequency point check – according to the cell

Neighbor analysis

Site view window

Attribute view window

Working area

Step5:Set Project configuration information

Project Management

Create a project

Step4:Add Project Name

Step3 ： Click Add

Step1: Star Nastar Step2:Click Setting

Project Management Open a project

Step2: Choose the new project

Step3: Click OK

Step1: Choose Project->Open Project

Project Management

Set a project

Delete the project

Set the map

Project setting

Step4:Authority setting

Step3:Right click User -> Authority Setting

Step2:Right Click -> Add a User

User Management User authority management

Step1:Project->User Management

Step4 ： Import configuration data

Step5 ： Import traffic statistic data

Step3 ： Import data dynamically

Step2 ： Create a BSC

Data ManagementData import — import of configuration

parameters and traffic statistic data

Step1 ： Create a network

Data Management Data import — Project parameter import

The following parameters must match each other:

Cell Name, LAC, CI, BTS Longitude, BTS Altitude, and Antenna Directional Angel

Data Management Data Export

Select the data sources to be exported

Select the parameters to be exported

RNO AnalysisSt

art N

asta

r

Crea

te P

roje

ct

Impo

rt P

roje

ct D

ata

Import Configuration Data

Import Statistic Data

Import Project Parameter

Net

wor

k O

ptim

ize

Anal

ysis

Configuration Par. Check

Neighbors Analysis

Network Trend Analysis

Frequency Analysis

Network Monitor

Trouble Shooting

Anal

ysis

Rep

ort

The analysis flow of Nastar GSM RNO

Step3:Select the check parameters

Check of Configuration Parameters

Step2:Select the check objects

Step1:Analysis->RNP Check

Step3:Select the cells

Frequency AnalysisCo-channel and adjacent channel check –

check according to the cell

Step1:Frequency Analysis->Co-fre. Adj-fre. Check

Step2:Select the check options

Step3 ： Set the frequency points to be checked

Frequency AnalysisCo-channel and adjacent channel check –

check according to the frequency pointStep1:Frequency Analysis->Co-fre. Adj-fre. Check

Step2 ： Set of the frequency arrange

Step3:Display the check results

Frequency Analysis Co-BCCH Co-BSIC check

Step1 ： Frequency Analysis->Co-BCCH Co-BSIC Check

Step2:Set the check conditions

Step4:Display the analysis results

Step3:Set the analysis conditions

Frequency Analysis Idle frequency point check

Step1:Frequency analysis->Idle ARFCNs

Step2: Select the analysis area

Step3:Display the analysis results

Frequency Analysis Spectrum utilization analysis

Step1:Frequency analysis->Spectrum Utilization

Step2:Set the analysis conditions

Step3:Select the analysis objects

Frequency Analysis Frequency optimization

Step1:Frequency analysis->Check Frequency Optimization

Step2:Set the analysis conditions

Neighbor Analysis Neighbor query

Neighbor maintenance

Step1:Neighbor analysis-> Neighbors

Step2:Select the original cells to be queried

Step1:Display the neighbors

Step2:Modify the neighbors

Step3:Save the modified results

Step3:Display the check results

Neighbor Analysis Neighbor checkCheck unidirectional neighbors and cells with fewer neighbors in the whole network

Step1:Neighbors Analysis->Check Unidirectional Neighbors

Step2:Display the query results in a list

Step3:Display the query results geographical

Step1:Neighbors Analysis->Check cells with fewer neighbors

Step2:Set the number of the neighbors

Step5:Export the planning results

Neighbor Analysis Automatic neighbor planning

Step4:Set the attribute

Step2:Set the antenna information

Step3:Set the geographical type of the planning area

Step1:Neighbors Analysis-> Neighbor Autoplaning

Step5:Select the monitor indicators

Step6:Edit the monitor conditions

Step2:Set the monitor time

Step3:Select the monitor objects

Step4:Set the alarm conditions

Network Performance Monitoring Performance indicator alarm

Step1:Right click to select the alarm indicators

Step5:Set the monitor objects

Step3:Set the monitor conditions

Step4:Select the monitor objects

Step2: Select the template

Network Performance Monitoring

Custom performance monitor indicators

Step1:Custom Alarm->New Alarm Task

Network Performance Monitoring

Introduction to performance monitoring reports Network performance monitoring report - TL

Count the network performance indicators and analyze the trend of the network performance within a week

Network monitoring report - EngineerCount the TOP 10 cells in the network KPI indicator, accessability, mobility, retainability, and network resource utilization and analyze the traffic statistic in detail, thus realizing a deep location of the network problems

Network performance monitoring report – Compare Report

Compare and analyze the network KPI indicators of two weeks, thus realizing the performance indicator monitoring after the network optimization

Network Performance MonitoringPerformance monitoring reports

Step1:Select the analysis objects

Step2:Select the report type

Step3:Set the analysis time segment

Step5:Set the query time

Step4: Define the VIC area

Step7:Count and set the worst cells

Step6:Set the drawing indicators

Step5:Set the indicator thresholds

Step4:Set the TOPN capacity indicators

Network Performance Monitoring Customized monitoring reports

Step3:Count and set the capacity indicators

Step2:Set the report type

Step1:Peformance Analysis->Report wizard

Deep Location of Network Problems

Topics of the deep location of

network problems Analysis of the performance KPI

indicators

Query cell/BSC–level KPI indicators,

analyze the trend of KPI indicators,

analyze the TOPN cells, and filter the

cells

Analysis of the access performance

Deep location of access performance

problems

Analysis of the retainability

performance

Analyze SDCCH/TCH call drops

Analysis of the mobility performance

Deep location of handover problems

Analysis of the TRX performance

Analysis of TRX measurement reports

Step3:Set the analysis objects

Step2:Set the statistic time segment

Step1:Double click Task

Deep Location of Network Problems

Implementation of the topic tasks

Step2:Set the report name

Step3:Set the statistic time and type

Step4:Set the busy hour and statistic type

Step5:Set the statistic objects

Step6:Set the statistic indicators

Analysis of the Traffic Statistic Enhanced traffic statistic

Step1:Performance Analysis->Traffic Statistic

Step2:Set the analysis arrange

Step3:Select the statistic objects

Analysis of the Network Resources Statistic of the network resources

Step1:Project->Resource Stat.

Step3:Set the analysis objects

Step2:Set the parameters

Analysis of the Network Resources

Optimization of the network resources

Step1:Performance Analysis->WRO Report