Post on 07-Aug-2015
Sustaina-Cool A/C Unit: Project Devlopment Overview
This was the start of sustainable DIY technology that has manifested into the Sustaina-cool A/C Unit. This image and the following three was for a project that would refurbish street lightpoles in Detroit,MI USA where I live.
Sustaina-Cool A/C Unit: Project Devlopment Overview
Sustaina-Cool A/C Unit: Project Devlopment Overview
Sustaina-Cool A/C Unit: Project Devlopment Overview
Sustaina-Cool A/C Unit: Project Devlopment Overview
These are the most recent plans for a sustainable DIY technology based on the same
fundaments of the retro-fitting street lights: upcycling and repurposing to make the Sustaina-Cool A/C Unit. The picture below show a recycling of air in a blowing and suction process
Sustaina-Cool A/C Unit: Project Devlopment Overview
within the unit. The section in the middle is cool center that take the cool air ( suction) to blowoutwardly. The two spaces on the sides blow ( blowing) air in from the opposite side of the fanto create a cycling process to make the most efficient use of the cooling unit.
Sustaina-Cool A/C Unit: Project Devlopment Overview
The image above shows using small electric motors ( harvested from used elctronics) to usedas generators in a series formation with a mini transformer. This layout would be used to power the unit to be mobile. The electric motors can be placed to be in the output pathway of the cool air or on top of the fan system to generate and store energy.
Sustaina-Cool A/C Unit: Project Devlopment Overview
This image and the next images show the building of the unit.
Sustaina-Cool A/C Unit: Project Devlopment Overview
Sustaina-Cool A/C Unit: Project Devlopment Overview
Sustaina-Cool A/C Unit: Project Devlopment Overview
Sustaina-Cool A/C Unit: Project Devlopment Overview
Sustaina-Cool A/C Unit: Project Devlopment Overview