Post on 04-Apr-2022
Performance Rubber & Additives
Portfolio Germany
Accelerators AntioxidantsBatch-Off-Release Agents Blowing AgentsCarbon BlacksCo-AgentsPolybutenesPolymerbound AcceleratorsPolymersProcessing AidsSilicone Rubber Stearic Acid
2
Content
Polymers 5
EP(D)M – Ethylene-Propylene Rubber 5 IIR – Isobutene-Isopropene Rubber 5NBR - Acrylonitrile-Butadiene Rubber 6 HNBR – Hydrogenated Butadiene Acrylonitrile Co-Polymer 8 BR – Butadiene Rubber 9 SBR – Styrene Butadiene Rubber 9 CPE – Chlorinated Polyethylene 9CSM – Chlorosulfonated Polyethylene 10FKM – Fluorocarbon Rubber 10
Carbon Blacks 12
Reinforcing Grades 12Semi Reinforcing Grades 13Conductive Grades 13 Class A Grades 13 Low PAH Grades 13Endure Series 14
Blowing Agents 14
Processing Aids 15
Flow Improver 15 Lubricants 15
Polybutenes 16
Polymerbound Accelerators 16
Sulfenamides 16Thiazoles 16 Dithiocarbamates 16 Guanidines 16 Thiurams 16 Thioureas 17 Special Accelerators 17 Vulcanizing Agents 17 Metal Oxide 17 Scorching Retarders 17
3
Stearic Acid 17
Batch-Off-Release Agents 18
Liquids 18 Dispersions 18 Powders 18
Antioxidants 18
Accelerators / Pure substances 19
Co-Agents 20
Biesterfeld TAC 20
Silicone Rubber 20
HCR Bases 20 HCR Compounds and FSR Compounds 21 LSR 21 FSR Bases 22 F-LSR 23 RTV 23
Silicone Rubber Additives 24
Flame Retardants, Heat Stabilizer, Processing Aids 24Silicone Rubber Color Masterbatches 24
4
Our Partners ...
5
Polymers
EP(D)M – Ethylene-Propylene Rubber
Copolymers EPM
EPDM
EPDM (Bimodal)
EPDM (Metallocene)
Cure rateProduct Application informationEthylen Content
Diene Content
MWDMooney Viscosity
Vistalon 404Vistalon 703Vistalon 706Vistalon 722Vistalon 785Vistalon 805Vistalon 1703 PVistalon 2504 NVistalon 3666Vistalon 7500Vistalon 7700Vistalon 8600Vistalon 9600Vistalon 8700Vistalon 8800Vistalon 8800 DVistalon 5601Vistalon 7001Vistalon 9301
high temperature applicationhigh green strengthhigh flex crack resistanceelectric properties, green strengthhoses, beltsvery high green strengthgreen strength, surfaceelectric properties, brake padssoft parts, blendsfast curing, good CSfast curing, good CS, high loadingvery fast curing, Spongevery fast curing, Spongevery fast curing, excellent CSvery fast curing, Spongevery fast curing, Spongegreen strength, high perform.rapid extrusion, inj.-mouldingroofing and sheeting
44,5 %72,5 %65,0 %72,0 %49,0 %78,0 %76,8 %55,5 %64,0 %55,5 %55,5 %57,5 %57,5 %63,0 %53,5 %54,0 %68,5 %73,0 %69,0 %
------
0,9 % *3,8 %4,5 %5,7 %7,0 %8,9 %9,0 %8,0 %10,0 %10,0 %5,0 %5,0 %2,8 %
very widenarrowbimodalnarrownarrownarrow
very widewide
mediumbimodalbimodalbimodalbimodalbimodalbimodalbimodaltailoredtailorednarrow
28 ML(1+4)125°C21 ML(1+4)125°C42 ML(1+4)125°C17 ML(1+4)125°C30 ML(1+4)125°C33 ML(1+4)125°C25 ML(1+4)125°C25 ML(1+4)125°C
52 ML(1+4)125°C (x)82 ML(1+4)125°C83 ML(1+8)150°C81 ML(1+4)125°C93 ML(1+8)150°C78 ML(1+4)125°C
73 ML(1+4)125°C (x)105 ML(1+8)125°C72 ML(1+4)125°C60 ML(1+4)125°C67 ML(1+4)125°C
IIR – Isobutene-Isopropene Rubber
Exxon Chlorobutyl CIIR
Exxon Bromobutyl BIIR
Exxpro
Butyl
Density (g/cm3)
Grade
Mooney Viscosity, ML (1+8) 125°C
Antioxydant Content Functional Content
10662211222222442255303534333745065S268S365S
0,920,930,930,930,930,930,930,930,920,920,92
38 ± 432 ± 432 ± 446 ± 546 ± 545 ± 535 ± 545 ± 529 - 3546 - 5630 - 36
0,02 %0,02 %0,02 %0,02 %0,02 %
---
0,03 %0,03 %0,03 %
non stainingnon stainingnon stainingnon stainingnon staining
---
non stainingnon stainingnon staining
1,26±0,081,08±0,151,03±0,301,08±0,151,03±0,300,47±0,050,75±0,071,10±0,100,85 - 1,251,50 - 1,902,00 - 2,60
w-% Chlorinemol-% Brominemol-% Brominemol-% Brominemol-% Brominemol-% Brominemol-% Brominemol-% Brominemol-% Unsaturationmol-% Unsaturationmol-% Unsaturation
(x) - contains process oil: Vistalon 8800: 15phr / Vistalon 3666: 75phr * - VNB
Product
6
NBR – Acrylonitrile-Butadiene Rubber
Standard Grades
Low acrylonitrile content
Medium acrylonitrile content
Medium high acrylonitrile content
NBR 1845
NBR 1855
NBR 1865
NBR 2645
NBR 2655
NBR 2665
NBR 2675
NBR 3335
NBR 3345
NBR 3365
NBR 3385
45±355±365±3
45±355±365±375±3
35±345±365±385±10
0,80,80,8
0,80,80,80,8
0,80,80,80,8
0,50,50,5
0,50,50,50,5
0,50,50,50,5
17-2017-2017-20
27-3027-3027-3027-30
31-3531-3531-3531-35
17,617,617,6
22,523,523,523,5
22,522,523,524
450450450
450450450450
45045045045
Automotive transmission belts, hoses, O rings, gaskets, seals, packers
Fuel and oil hoses, gaskets, oil seals, packers, conveyor belts
Cables, hoses, conveyor and driving belts, gaskets, oil seals, shoe products, industrial and automotive molded parts
Mooney viscosity ML 1+4 (100 °C)
Mooney viscosity ML 1+4 (100 °C)
Mooney viscosity ML 1+4 (100 °C)
Volatile matter content, %, max
Volatile matter content, %, max
Volatile matter content, %, max
Ash content, %, max
Ash content, %, max
Ash content, %, max
Acrylonitrile content, %
Acrylonitrile content, %
Acrylonitrile content, %
Tensile strength at stretching, MPa, min
Tensile strength at stretching, MPa, min
Tensile strength at stretching, MPa, min
Relative elongation at break, %, min
Relative elongation at break, %, min
Relative elongation at break, %, min
Application
Application
Application
Copolymer of acrylonitrile (17-20 %) and 1,3-butadiene obtained by emulsion polymerization method with the use of phyto-genous fatty acid soaps as emulsifier in accordance with the ecologically clean technology, contains non-staining antioxidant. Medium oil and fuel resistance, medium gas impermeability. Operating temperature range from - 60° C to + 100 °C
Copolymer of acrylonitrile (27-30 %) and 1,3-butadiene obtained by emulsion polymerization method with the use of phyto-genous fatty acid soaps as emulsifier in accordance with the ecologically clean technology, contains non-staining antioxidant. High oil and fuel resistance, heat resistance. Operating temperature range from - 30° C to + 120 °C
Copolymer of acrylonitrile (31-35 %) and 1,3-butadiene obtained by emulsion polymerization method, with the use of phy-togenous fatty acid soaps as emulsifier in accordance with the environmentally friendly technology, contains non-staining antioxidant. High oil and fuel, abrasion, heat resistance, medium gas impermeability. Operating temperature range from -20° C to +120 °C
Product
Product
Product
7
High acrylonitrile content
Special Grades
NBR 4045
NBR 4055
NBR 4065
NBR 2675 FC
NBR 3335 FC
NBR 3345 FC
grade 1
grade 2
45±355±365±3
75±3
35±3
45±3
50-6566-80
0,80,80,8
≤0,8
≤0,8
≤0,8
0,80,8
0,50,50,5
≤0,5
≤0,5
≤0,5
11
36-4036-4036-40
27-30
31-35
31-35
28-3228-32
42525
2,1±0,8
1,1±0,5
1,3±0,5
2525
425425425
18,6±2,3
16,3±0,5
17,6±2,2
2,9±1,2
3,1±1,2
3,1±1,2
4,3±1,3
5,2±1,6
4,8±1,4
9,0±2,4
13,5±3,3
12,2±3,0
450450
Oil and fuel hoses, gaskets, seals, reinforced hoses for transfer oil, petroleum products
NBR FC are the special products which designed for injection moulding application.During the process of high-temperature moul-ding and vulcanization of rubber goods these grades significantly reduce tendency to residue formation on the curing surface of rubber moulds and allow cycle time reduction
Cables, reinforced hoses, wires, gaskets, shoes, belts
Mooney viscosity ML 1+4 (100 °C)
Mooney viscosity ML 1+4 (100 °C)
Mooney viscosity ML 1+4 (100 °C)
NBR 26
PVC 30
Volatile matter content, %, max
Volatile matter content, %, max
Volatile matter content, %, max
Ash content, %, max
Ash content, %, max
Ash content, %, max
Acrylonitrile content, %
Acrylo-nitrile content, %
Acrylonitrile content, %
Tensile strength at stretching, MPa, min
Tensile strength at stretching, MPa, min
Relative elongation at break, %, min
Relative elongation at break, %, min
Application
Cure characteristics (MDR 2000 Rheometer of Alpha Technologies, 160 º C - 30min)
Minimal torque (ML), dNm
Maximum torque (MH), dNm
Scor-ching time (ts1), min
50% curing time (t50), min
90% curing time (t90), min
Application
Application
Copolymer of acrylonitrile (36-40 %) and 1,3-butadiene obtained by emulsion polymerization method, with the use of phy-togenous fatty acid soaps as emulsifier in accordance with the environmentally friendly technology, contains non-staining antioxidant. Very high oil resistance, heat resistance, medium gas impermeability. Suitable for injection moulding, mould pressing and extrusion. Operating temperature range from - 10° C to + 120 °C
NBR/PVC
The NBR-PVC compound is a homogeneous of an acrylonitrile butadiene copolymer with PVC. The rubber is obtained as a result of joint coagulation of butadiene-acrylonitrile latex with polyvinylchloride latex. Contains non-staining antioxidant. The main advantage in relation to traditional nitrile rubbers is its exceptional resistance to ozone. Operating temperature range from - 30° C to + 120 °C
NBR FC
Fast curing, low mold fouling and easy processing
Product
Product
8
HNBR – Hydrogenated Butadiene Acrylonitrile Co-Polymer
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
Zhanber
ACN content (%)
Mooney Viscosity, ML (1+4) 100°C
Hydrogenation Degree (%)
Iodine value (mg/100mg)
ZN28255ZN35053ZN35056ZN35058ZN350512ZN35153ZN35156ZN35158ZN35253ZN35256ZN35258ZN35355ZN39057ZN43056ZN43058ZN43156ZN43259
2836363636363636343434353942424242
50356585
>110356080356080507065856590
9099999999959595909090859999999590
23-314-104-104-104-1011-1711-1711-1723-3123-3123-3152-604-104-104-1011-1718-26
Powder and pre-crosslinked NBR
NBR 33CL
PNBR 33CL
PNBR 3355
PNBR 3365
35-85
49-61
50-60
61-70
0,5
0,8
0,8
0,8
0,5
/
/
/
31-35
31-35
31-35
31-35
23,5
/
/
/
450
/
/
/
/
6 to 12
6 to 10
6 to 10
/
99
99
99
SIBUR can produce cross linked grades on request in two forms: bales or powder
Mooney viscosity ML 1+4 (100 °C)
Volatile matter content, %, max
Ash content, %, max
Acryloni-trile con-tent, %
Tensile strength at stretching, MPa, min
Relative elongation at break, %, min
Anti-agglo-merator (PVC)*, %
The size of particles is less than 1,00 mm*, %, not less
Application
Copolymer of acrylonitrile (36-40 %) and 1,3-butadiene obtained by emulsion polymerization method, with the use of phy-togenous fatty acid soaps as emulsifier in accordance with the environmentally friendly technology, contains non-staining antioxidant. Very high oil resistance, heat resistance, medium gas impermeability. Suitable for injection moulding, mould pressing and extrusion. Operating temperature range from - 10° C to + 120 °C
NBR NT Typen
NBR-2645 NT
NBR-3335 NT
NBR-3345 NT
NBR-3375 NT
27-3031-3531-3531-35
42-4832-3842-4872-78
Colored compounds for injections moulding, carbon black compounds, automotive moulded parts, sealings, conveyor belts, industrial and hydraulic hoses, shoe soles, etc.
ACN content, wt % ML1+4 100°C Application
Copolymer of acrylonitrile (31-35 %) and 1,3-butadiene obtained by emulsion polymerization method, with the use of phy-togenous fatty acid soaps as emulsifier in accordance with the environmentally friendly technology, contains non-staining antioxidant. High oil and fuel, abrasion, heat resistance, medium gas impermeability. Operating temperature range from -20° C to +120 °C
Product
Product
Product Type
9
BR – Butadiene Rubber
CHIMEI Kibipol
CHIMEI Kibipol
CHIMEI Kibipol
CHIMEI Kibipol
PR-255PR-040PR-040SPR-060
low cis BR (<35 %)high cis BR (>97 %)high cis BR (>97 %)high cis BR (>97 %)
MV 1+4: 54MV 1+4: 45MV 1+4: 45MV 1+4: 63
Li-catalyzedNd-catalyzedNd-catalyzedNd-catalyzed
Colorless, odorlessWhite, modern tyre quality White, shoe soles, modern tyre qualityWhite, modern tyre quality
Cis content
Mooney Viscosity, ML (1+4) 100°C
Catalyst Properties
SBR – Styrene Butadiene Rubber
ESBR
CHIMEI Kibipol SSBR
Mooney Viscosity, ML (1+8) 125°C
Styrene content Functional Content
1500 stabilized1502 stabilized1778 oil extendedPR-1205 Li catalyzedPR-6256 oil extendedPR-6345 oil extendedPR-6404PR-3216PR-3285
5252
41-51474770
6265
23,5 %23,5 %23,5 %18,0 %25,0 %34,0 %
21,0 %28,0 %
stainingnon stainingnon stainingnon stainingnon staining
non staining
Dark brown, tyre qualityPale, industrial qualityPale, industrial purposeWhite (for EC label tyres)TyresTyresTyresTyresTyres
CPE – Chlorinated Polyethylene
CM 3660 T
CM 3690
CM 3685
CM 3675
CM 3665
CM 3660
CM 3655
CM 3650
CM 4085
CM 3055
CPE 135A
CPE 135A-PS
MF 1032
35 - 3735 - 3735 - 3735 - 3735 - 3735 - 3735 - 3735 - 3739 - 4129 - 3135 - 3735 - 3731 - 33
60 - 75 85 - 95 80 - 90 70 - 80 60 - 70 55 - 65 50 - 60 45 - 55 80 - 100 50 - 60 80 - 100 80 - 100 50 - 60
≤ 60≤ 60≤ 60≤ 55≤ 55≤ 55≤ 55≤ 55≤ 55≤ 65≤ 60≤ 60≤ 65
Wire and cable, hoses Rubber compounding Rubber compounding Wire and cable, hoses Wire and cable, hoses, clean surface, high extruding speedWire and cable, hoses, clean surface, high extruding speed Cable jacketingCable jacketingHigh level flame and oil resistanceSuitable for magnetic materialsPVC impact modifierPVC impact modifier, higher plastification speed Impact modifier for ABS and PU
Mooney Viscosity ML (1+4) 125°C
Chlorine Content (%)
Shore A Typical application
Grade
Grade
Product
Product
Product
10
CSM – Chlorosulfonated Polyethylene
CSM 20
CSM 30
CSM 40
CSM 40
CSM 4085
CSM 45
CSM 6525
33043305
22-31
35-4541-5051-60
85-95
32-4283-97
29 ± 2%
43 ± 2%35 ± 2%35 ± 2%
36 ± 2%
23,5 ± 1,5%27 ± 2%
Adhesives, tapes, soft coatings, natural rubber modification
Adhesives, hard coatings, pipelines, anticorrosion liningAutomotive hoses, rubber seals, wire and cable Automotive hoses, rubber seals, wire and cable rubber compounds, rubber rollers
High perform. automot. hoses, oil seal products, special tapes
Magnetic rubber, radiation shield, high rigidity products Automobile accesories, drive belts, pump & hidraulic hoses
Mooney Viscosity ML (1+4) 100°C
Type Chlorine content
Typical application
Bisphenol-Curable Dipolymers
Tecnoflon® N 215/U
Tecnoflon® N 535
Tecnoflon® N 935
Tecnoflon® NH
Tecnoflon® FOR 210
Tecnoflon® FOR 421/U
Tecnoflon® FOR 432
Tecnoflon® FOR 4353
Tecnoflon® FOR 531
Tecnoflon® FOR 5312K
Tecnoflon® FOR 532
Tecnoflon® FOR 5351
Tecnoflon® FOR 5351/U
Tecnoflon® FOR 539
Tecnoflon® FOR 60K/U
Tecnoflon® FOR 610
Tecnoflon® FOR 65BI
Tecnoflon® FOR 7353
Fluorine
Content (%)
Mooney
Viscosity, ML (1+10) 121°C
TR10 (°C) Description
666666666666666666666666666666666666
1027621241024192046424524242131
3738
-17-17-17-17-17-17-17-17-17-17-17-17-17-17-17-17-17-17
Base polymerBase polymer, FDA compliantBase polymer, FDA compliantBase polymer, FDA compliantCure incorporatedCure incorporatedCure incorporatedCure incorporated, FDA compliantCure incorporatedCure incorporated, metal adhesionCure incorporatedCure incorporatedCure incorporatedCure incorporatedCure incorporatedCure incorporatedCure incorporatedCure incorporated, FDA compliant
FKM – Fluorocarbon Rubber
Product
Product
11
Bisphenol-Curable Dipolymers, HS Grades
Bisphenol-Curable Low-Temperature Terpolymers
Bisphenol-Curable Terpolymers
Peroxide-Curable
Tecnoflon® N 90HS
Tecnoflon® FOR 501HS
Tecnoflon® FOR 50HS
Tecnoflon® FOR 801HS
Tecnoflon® FOR 80HS
Tecnoflon® T 636/L
Tecnoflon® FOR 5361
Tecnoflon® FOR 6363A
Tecnoflon® FOR TF636
Tecnoflon® TN 50A
Tecnoflon® TN
Tecnoflon® FOR 4391
Tecnoflon® FOR 5381
Tecnoflon® FOR 7380K
Tecnoflon® FOR 9381
Tecnoflon® P 457
Tecnoflon® P 757
Tecnoflon® P 459
Tecnoflon® P 959
Fluorine
Content (%)
Fluorine
Content (%)
Fluorine
Content (%)
Fluorine
Content (%)
Mooney
Viscosity, ML (1+10) 121°C
Mooney
Viscosity, ML (1+10) 121°C
Mooney
Viscosity, ML (1+10) 121°C
Mooney
Viscosity, ML (1+10) 121°C
TR10 (°C)
TR10 (°C)
TR10 (°C)
TR10 (°C)
Description
Description
Description
Description
6666666666
6666
65,566
686870
68,568
68,5
67677070
4523234038
22213031
236749213250
21452448
-17-17-17-17-17
-19-19-19-19
-14-14-7-13-14-13
-15-15-5-5
Base polymer, FDA compliantCure incorporatedCure incorporatedCure incorporatedCure incorporated
Base polymerCure incorporatedCure incorporatedCure incorporated
Base polymerBase polymer, FDA compliantCure incorporatedCure incorporatedCure incorporated, metal adhesionCure incorporated
FDA compliantFDA compliantFDA compliantFDA compliant
Based on an innovative polymerization technology that allows curing without Ca(OH)2. Benefits include enhanched scorch safety, improved mechanical properties, lower compression set and shorter post-cure time.
Due to the specific monomer composition, these grades show improved cold-temperature flexibility compared to bisphenol terpolymers and dipolymers
Product
Product
Product
Product
12
Peroxide-Curable Low-Temperature
Peroxide-Curable Extreme Low-Temperature
Specialty Grades
Tecnoflon® PL 458
Tecnoflon® PL 958
Tecnoflon® PL 557
Tecnoflon® PL 455
Tecnoflon® PL 855
Tecnoflon® VPL 55540
Tecnoflon® VPL 85540
Tecnoflon® TN Latex
Tecnoflon® NM Powder
Tecnoflon® FPA1
Tecnoflon® M1
Tecnoflon® M2
Fluorine
Content (%)
Fluorine
Content (%)
Mooney
Viscosity, ML (1+10) 121°C
Mooney
Viscosity, ML (1+10) 121°C
TR10 (°C)
TR10 (°C)
Description
6666
65,56464
6565
2953351954
2545
-24-24-29-30-30
-40-40
Water-based FKM Terpolymer emulsion (70 % solids), alternative to solvent-based fluoro-elastomer coatingsFKM Copolymer used as processing aid for polyolefinsFluorinated processing aid for rubber, improves flowabilityCurative (Bisphenol AF crosslinker)Curative (Phospohonium salt accelerator)
Carbon Blacks
Reinforcing Grades
VULCAN 10HD
VULCAN 9
VULCAN 9H
VULCAN 6
VULCAN 7H
REGAL 300
VULCAN 3
VULCAN M
VULCAN 3H
VULCAN J
VULCAN 1345
VULCAN 1391
STSA (m²/mg)
Type Iodine
(mg/g)
Specific Surface Structure
N134N115/SAFN121N220/SAFN234N326/HAF-LSN330/HAFN339N347/HAF-HSN375n.a.n.a.
1291231141041137876878291122157
1421601211211208282909090124202
979611198101688810097969499
10111313211412572102120124114110134
132123119115124111104110104115128145
crushed OAN (ml/100g)
OAN
(ml/100g)
Tint strength % ITRB
Product
Product
Product
Product
13
Semi Reinforcing Grades
STERLING SO-1
STERLING SO
STERLING V
STERLING 105
STERLING VH
REGAL SRF
SPHERON 4000
STSA
(m²/mg)
Type ASTM-D1765
Iodine (mg/g)
Specific Surface Structure
N539/FEF-LSN550/FEFN660/GPFN683/APFN650/GPF-HSN772/SRF-LM-NS
39403636353129
43433635363032
82847387825748
111121901331226552
58596055565754
crushed OAN (ml/100g)
OAN (ml/100g)
Tint strength % ITRB
Conductive Grades
VULCAN P
VULCAN XC-72
BLACK PEARLS 2000
STSA
(m²/mg)
Type ASTM-D1765
Iodine (mg/g)
Specific Surface Structure
N294/SCFN472/ECFn.a.
96127
1500
172253n.a.
97120n.a.
116174330
10487
164
crushed DBP (ml/100g)
DBP (ml/100g)
Tint strength % ITRB
Class A Grades
Low PAH Grades
SPHERON 6400A
SPHERON 6000A
SPHERON 5000A
SPHERON SO-1A
SPHERON SOA
SPHERON SO-LP
SPHERON 4000-LP
VULCAN 6-LP
STSA
(m²/mg)
Benzo(a)- pyrene
(max value)
Type ASTM-D1765
Type ASTM-D1765
Iodine (mg/g)
Specific Surface Structure
PAH content* (ppm)
n.a.n.a.n.a.N539/FEF-LSN550/FEF
N550/FEFn.a.N220/SAF
1821273840
111
1620274343
7170808284
111
9592120111121
202020
3437455760
crushed DBP (ml/100g)
For each of 8 PAH included in EU list (max value)
DBP (ml/100g)
For sum of 18 PAH included in GS Mark list (max value)
Tint strength % ITRB
* Cabot internal test method requires 48 hours toluene extraction (Soxhlet)* STSA, Iodine and OAN is the same as for normal carbon black grades without low PAH
Product
Product
Product
Product
14
Endure Series
Benefits & ApplicationsGradeProduct
Enhanced balance in hysteresis and reinforcementFor applications & needs, calling for a lower hysteresis and heat built up e.g.:Low RR long haul conveyor belts, less energy consumptionRubber Tracks; reduce heat built up induced part life failures (‚blow outs‘)
Enhanced Abrasion, Tear and Chip, Cut & Chunk Resistance For applications, benefitting from better wear Resistance for longer part life e.g.: Mining Mill Liners Top Cover of High Wear Resistant Conveyor BeltsTread of Rubber Tracks
Endure E45 CBEndure E43 CBEndure E37 CBEndure E33 CBEndure E23 CBEndure D53 CB
Endure D63 CB
E Series CB
D Series CB
Blowing Agents
Cellcom
CAP/264
Cellcom H
Cellcom OBSH
Cellcom OBSH/ASA2
Cellcom EPOB/75
Cellcom AC 7000
Cellcom EP7F/75
Type Description Decomposition Temp.
Gas volume
Micro-Capsules
TSH
OBSH pwd
OBSH pwd dustfree
OBSH polymer-bound granules
ADC pwd
ADC polymer-bound granules
high pressurized gases (e.g. butene), enclosed in polymeric shells
p-Toluenesulfonylhydrazide
P,P‘-Oxybis Benzene Sulfonyl Hydrazide
P,P‘-Oxybis Benzene Sulfonyl Hydrazide
p,p‘-Oxybis (benzenesulfo-nylhydrazide) with EPDM
Azodicarbonamide
Azodicarbonamide with EPDM
115-185°C
148-154°C
158-164°C
158-164°C
158-164°C
196-205°C
198-205°C
120-130 ml/g
125-140 ml/g
125-140 ml/g
90-105 ml/g
240-300 ml/g
200-220 ml/g
Suitable for most polymers. Shell residue may suffer the pureness of the blown product
Elastomer foaming for high hygienic (medical) purposes: NR, SBR, IIR, CR, EPDM, EVA.
Fine foam structure, no odoir, no colouring. Applicable for food and medical products. PVC, EVA, EPDM, CR, NR, SBR, NBR, NBR/PVC, PE-LD, PU
Chemical blowing agent, available in various types. Any PVC, HD-PE, LD-PE, PP, PS, HI-PS, EVA, ABS, PPO, TPE and various elastomers basing on EPDM, CR
Application DetailsProduct
15
Flow Improver
Processing Aids
MA-F44
MA-F50
MA-F60
MA-F60T
MA-F70S
Pastille colour Extra benefits besides of major function
Reacted blend of fatty acid derivatives
Zinc soaps of unsatu-rated, high molecular weight fatty acids
Blend of zinc soaps of high molecular weight fatty acids
Structure of fatty acid soaps and amides
Blend of zinc soaps of unsaturated, high molecular weight fatty acids
pale yellow
beige
yellowish
beige
beige
For high mineral/silica filled NR and synthetic rubbers. Cell structure improver for EVA foams
Very effective for physical NR and synthetic rubber peptisation, enhan-ces carbon black dispersion
Dedicated for low temperature mixing, improves NR physical peptisation
Improves NR physical peptisation, enhances calandering and extrusion, provides smooth surface and higher tear strength
Very effective for white fillers, especially for high loaded Silica com-pounds, prevents blooming
Product Description
Lubricants
MA-L16
MA-L20
MA-L22
MA-L25
MA-L33
MA-L42
MA-L48
MA-L79
Pastille colour Extra benefits besides of major function
Structure of fatty acid soaps and amides
Fatty acid ester derivative
High molecular weight, aliphatic fatty acid ester
Fatty acid ester derivative
Structure of high mole-cular weight esters and fatty acid soaps
Blend of fatty acid derivative
Blend of esters and metal soaps of natural fatty acids
Fatty Acid Ester and Polymer
pale beige
white
white
white
beige
beige/white
beige/white
white
For practically all elastomers, reduces sticking on metal surfaces, enhan-ces injection moulding
General purpose, works with most fillers and cureatives. Enhances mould release
High temperature capable, very effective in polar polymers. Improves filler incorporation
General purpose, works with most fillers and cureatives. Improves mould filling
Prevents filler agglomeration in high filled compounds. Improves filler incorporation in open and closed mixing systems
Special recommendation for EPM and EPDM. Enhances mould flow
Highly effective for specialty Polymers. Particular suitable to improve flow and release of ECO compounds. It also workes very well to improve extrusion of NBR/PVC blend compounds
has excellent lubricating properties, which leads to reduction of injection pressure in the moulding process and prevents scorch
Product Description
16
Polymerbound Accelerators
Sulfenamides
Thiazoles
Dithiocarbamates
Actmix CBS-80GE F140
Actmix DCBS-80GE F140
Actmix TBBS-80GE F140
Actmix MBTS-75GE F140
Actmix ZMBT-80GE F140
Actmix ZBEC-70GE F100
Active Ingredient
Active Ingredient
Active Ingredient
Active Ingredient
Active Ingredient
Carrier
Carrier
Carrier
Carrier
Carrier
Content (% m/m)
Content (% m/m)
Content (% m/m)
Content (% m/m)
Content (% m/m)
N-cyclohexyl-2 benzothiazole sulphenamideN,N-Dicyclohexyl-2-benzothiazolesulphenamide N-tert butyl-2-benzothiazyl-sulphenamide
Dibenzothiazyldisulphide Zinc salt of 2-mercaptobenzothiazole
Zinc dibenzyldithiocarbamate
EPDM / EVAEPDM / EVAEPDM / EVA
EPDM / EVAEPDM / EVA
EPDM / EVA
808080
7580
70
GranulesGranulesGranules
GranulesGranules
Granules
Appearance
Appearance
Appearance
Appearance
Appearance
Thiurams
Guanidines
Actmix TBzTD-75GE F140
Actmix DPTT-75GE F140
Actmix DPG-80GE F140
Tetrabenzylthiuram disulphideDipentamethylene thiuram tetrasulphide
Diphenylguanidine
EPDM / EVAEPDM / EVA
EPDM / EVA
7575
80
GranulesGranules
Granules
Product
Product
Product
Product
Product
Product Description
Polybutenes
INDOPOL Clear and bright viscous liquid synthetic hydrocarbon polymer (molecular weights between 180 - 6000) made by polymerization of Isobutene + N-Butene
17
Actmix CTP-80GE F500
Actmix Retarder E-80GE F200
Cyclohexylthiophthalimide N-Phenyl-N-(trichloromethylsulfenyl)-benzene sulfonamide
EPDM / EVAEPDM / EVA
8080
GranulesGranules
Actmix S-80GE F120
Actmix S-80GS
Actmix S-80GN F140
Actmix IS60-75GE
Sulphur Sulphur Sulphur Insoluble Sulfur
EPDM / EVASBRNBREPDM / EVA
80808075
GranulesGranulesGranulesGranules
Active Ingredient
Active Ingredient
Active Ingredient
Active Ingredient
Active Ingredient
Carrier
Carrier
Carrier
Carrier
Carrier
Content (% m/m)
Content (% m/m)
Content (% m/m)
Content (% m/m)
Content (% m/m)
Appearance
Appearance
Appearance
Appearance
Appearance
Special accelerators
Thioureas
Actmix ZDTP-50GE F500
Actmix ZBPD-50GE F140
Actmix ETU-80GE F140
Zinc dialkyldithiophosphate Zinc o,o-dibutyl dithiophosphate
N-N‘-Ethylenethiourea
EPDM / EVAEPDM / EVA
EPDM / EVA
5050
70
GranulesGranules
Granules
Vulcanizing agents
Metal Oxide
Scorching retarders
Actmix MgO 75GE F140 Magnesium oxide EPDM / EVA75 Granules
Acid Value mgKOH/g
Saponification Value mgKOH/g
Lodine Value mgKOH/g
TITRE °C Properties
Stearic Acid
Palmera B1805 Flakes
200-210 202-212 5 Max 53-59 Rubber Grade
Product
Product
Product
Product
Product
Product
18
Liquids
Active
Batch-Off-Release Agents
Alkon 6460
Alkon 7310
Alkon 7315
26%28%
-
Easy dispersed in water Uniform coatings on rubber compoundsSupperior release propertiesCustomized formulations available
Dispersions
Powders
Active
Active
Polycoat RLS-40
Polycoat LCD
Alkon 9520
Alkon 9420
Alkon 9195L
Alkon 9310AA
31,5-35,3%
36,2%
100%
Is a stable high solids slurry for a wide range of synthetic rubber. It is environmentally friendly and contains no zinc, alpha quartz or SARA reportable compounds. Compatible with SASCO Automated Slurry System
Is an effective anti-tack coating on some of the toughest polymers and environmentally friendly
Easy dispersed in waterUniform coatings on rubber compoundsMinimum foaming or sedimentationExcellent release propertiesVery strong and rigid coating
Antioxidants
Active Ingredient Meltin Point, onset (°C) Appearance
IPPD
6PPD
TMQ
N-isopropyl-N‘-phenyl-p-phenylendiamineN-(1,3-dimethyl-butyl)-N‘- phenyl-p-phenylendiaminepolymeric 2,2,4-trimethyl-1,2-dihydrochinoline
755080
dark granulesdark granulesamber coloured granules
Description
Description
Description
Product
Product
Product
Product
19
Accelerators / Pure substancesSulfenamides
Active Ingredient Colour Appearance
CBS
TBBS
DCBS
TBSI
N-cyclohexyl-2 benzothiazole sulphenamideN-tert-butyl-2-benzothiazyl sulfenamideN,N-dicyclohexyl-2-benzothiazole sulphenamideN-t-butyl-di-(2-benzothiazole) sulfenimide
off-white/greyishoff-white/greyishlight browngrayish/white
granules/oil coated powdergranules/oil coated powdergranules/oil coated powderoil coated powder
Dithiocarbamates
Guanidines
Dithiophosphate
Thiazoles
Active Ingredient
Active Ingredient
Active Ingredient
Active Ingredient
Colour
Colour
Colour
Colour
Appearance
Appearance
Appearance
Appearance
ZBEC
ZDBC
ZDEC
TDEC
DPG
ZDTP
MBT
MBTS
ZMBT
Zinc dibenzyldithiocarbamateZinc dibutyl dithiocarbamateZinc diethyl dithiocarbamateTellurium diethyldithiocarbamate
Diphenylguanidine
Zinc dialkyl dithiophosphate
2-MercaptobenzothiazoleDibenzothiazyldisulphideZinc salt of 2-mercaptobenzothiazole
whitewhitewhiteorange and yellow
off-white / greyish
yellowish
light yellowyellowlight yellow
granules/oil coated powdergranules/oil coated powdergranules/oil coated powdergranules/oil coated powder
granules/oil coated powder
vicous liquid
granules/oil coated powdergranules/oil coated powdergranules/oil coated powder
Thioureas
Thiurams
Active Ingredient
Active Ingredient
Colour
Colour
Appearance
Appearance
ETU
TBzTD
TiBTD
TMTM
N-N‘-Ethylenethiourea
Tetrabenzylthiuram disulphideTetraisobutylthiuram disulphideTetramethylthiuram monosulphide
white
whitewhiteyellow
granules/oil coated powder
granules/oil coated powdergranules/oil coated powdergranules/oil coated powder
Product
Product
Product
Product
Product
Product
Product
20
Chemical composition Concentration Consistency
Co-Agents
Biesterfeld TAC 70E Triallylcyanurat 70 % Dry liquid
Silicone Rubber HCR Bases
Biesterfeld TAC
Silicone Rubber
ApplicationsMain featuresProduct
Product
XIAMETER®RBB 2100 serie
XIAMETER® 2008 serie
XIAMETER®RBB 2110 serie
XIAMETER®RBB 2120 serie
XIAMETER®RBB 2130 serie
XIAMETER®RBB 2140 serie
XIAMETER®RBB 2060 serie
XIAMETER®RBB 2150/70
Moulding, extrusion, calendering Any type of applications
Moulding, extrusion, calendering Any type of applications
Moulding, extrusion, calendering Any type of applications
Moulding, extrusion, calendering Any type of applications
Moulding, extrusion, calendering Any type of applicationsSealing, gasketing
Cables extrusion
Moulding, extrusion, calendering Any type of applicationsExtrusion, calendering Any type of applications
General Purpose Grades 20-80 Shore ATranslucent Food statusGeneral Purpose Grades 30 + 50 + 70 Shore ATranslucent Food status High Tear Resistance30-70 Shore ATranslucentFood statusVery High Tear Resistance55-70 Shore AFood statusNon Post Cure Grades 40-80 Shore ALow Compression SetFood statusWire and Cable Grades40-50 Shore ALow Temperature Grades 40-50 Shore AHigh Green Strength70 Shore A
21
Silicone Rubber HCR Compounds and FSR Compounds
ApplicationsMain featuresProduct
SEMSIL HCR
SEMSIL FSR
Moulding, extrusion, calendering Any type of applications“
Moulding, extrusion, calendering Any type of applications
Full customisation of the compounds according to customers needs:
mechanical properties food applicationsflame retardancycolorpreforming/packagingcuring system: peroxide or platinum
Full customisation of the compounds according to customers needs:
mechanical properties food applicationsflame retardancycolorpreforming/packagingcuring system: peroxide or platinum
Silicone Rubber LSR
ApplicationsMain featuresProduct
XIAMETER®RBL 9200 serie
XIAMETER®RBL 2004 serie
XIAMETER®RBL 920X serie
XIAMETER®RBL 9390 serie
DOWSIL®QP1 & QP2
DOWSIL®C6
XIAMETER®RBL 9252 serie
XIAMETER®RBL 1551-55 P
SILASTIC®590
XIAMETER®RBL 1523-30
NPC 9300-xx
MouldingAny type of applications
MouldingAny type of applicationsgasketing/sealing
Moulding weatherpack/connector seals
Moulding Engine gasketMouldingMedical applicationsMouldingMedical applications
Coating SleevingMouldingHigh Voltage InsulatorsMouldingSleevingMoulding Electrical applicationsFood and Infant Care Applications
General Purpose Grades20-70 Shore ATranslucent Food statusGeneral Purpose GradesLow compression set20-75 Shore ATranslucent Food statusOil Bleeding20-50 Shore A1 to 6 % oil contentOil Resistant50-70 Shore A20 -75 Shore AUSP Class VI30-70 Shore AUSP Class VISkin contactCoating/Sleeving Grade
High Voltage
Flame Resistance
Electrical Conductive Grade
Non Post Cure LSR
22
Silicone Rubber FSR Bases
ApplicationsMain featuresProduct
LS 2840
LS 2860
LS 5 2040
LS 5 2060
LS 5-8740
LS 5-8760
LS 5-8720
LS 4-9040
LS 4-9060
LS 4-9080
LS-2940
LS-2970
LS-4940
LS-4960
Moulding ,extrusion, calendering Oil and fuel resistance applications
Moulding ,extrusion, calendering Oil and fuel resistance applications
Moulding ,extrusion, calendering Oil and fuel resistance applications
Moulding ,extrusion, calendering Oil and fuel resistance applications
Moulding ,extrusion, calendering Oil and fuel resistance applications
Moulding ,extrusion, calendering Oil and fuel resistance applications
Moulding ,extrusion, calendering Oil and fuel resistance applications
Moulding ,extrusion, calendering Oil and fuel resistance applications
Moulding ,extrusion, calendering Oil and fuel resistance applications
Moulding ,extrusion, calendering Oil and fuel resistance applications
Moulding applications Orings, diaphragms
Moulding applications Orings, diaphragms
Designed for Turbocharger applications calendering and extrusion
Designed for Turbocharger applications calendering and extrusion
Standard Grade 40 Shore A
Standard Grade 60 Shore A
High mechanical properties 40 Shore A
High mechanical properties 60 Shore A
High mechanical properties 40 Shore A
High mechanical properties 60 Shore A
Low modulus 20 Shore A
Low compression set 40 Shore A
Low compression set 60 Shore A
Low compression set 80 Shore A
High Resilience/Rebound Very low compression set NPC Excellent Solvent / Fluid Resistance
High Resilience/Rebound Very low compression set NPC Excellent Solvent / Fluid Resistance
High heat stability up to 250ºC Good acid gas resistance High Tear strength Low compression set
High heat stability up to 250ºC Good acid gas resistance High Tear strength Low compression set
23
Silicone Rubber F-LSR
Silicone RTV
Applications
Applications
Main features
Main features
Product
Product
Silastic® FL 30-9201 LSR
Silastic® FL 40-9201 LSR
Silastic® FL 60-9201 LSR
Silastic® FL 70-9201 LSR
Silastic® FL 45-9001 F-LSR
Silastic® FL 65-9001 F-LSR
XIAMETER®RTV-3081 Curing Agent
XIAMETER®RTV-3081-R Curing Agent
XIAMETER®RTV-3081-F Curing Agent
XIAMETER®RTV-3081-VF Curing Agent
XIAMETER®RTV-3481 Base
XIAMETER®RTV-3483 Base
XIAMETER®RTV-3483 Curing Agent
XIAMETER®RTV-3487 Base
XIAMETER®RTV-3110 Base
XIAMETER®RTV-3496 Base
XIAMETER®RTV-3133 Base
XIAMETER®RTV-3497 Base
XIAMETER®RTV-3120 Base
XIAMETER®RTV-3112 Base
XIAMETER®RTV-4136-M kit
XIAMETER®RTV-4131-P1 kit
XIAMETER®RTV-4250-S kit
XIAMETER®RTV-4251-S2 kit
XIAMETER®RTV-4232-T2 kit
XIAMETER®RTV-4260-V kit
XIAMETER®RTV-4234-T4 kit
Moulding Oil and fuel resistance applications
Moulding Oil and fuel resistance applications
Moulding Oil and fuel resistance applications
Moulding Oil and fuel resistance applications
Moulding Oil and fuel resistance applications
Moulding Oil and fuel resistance applications
Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking Mouldmaking
30 Shore A Fully (100 %) fluorinated Excellent resistance to fuels and oils Retain elasticity at low temperatures (Tg ~ -68°C)
40 Shore A Fully (100 %) fluorinated Excellent resistance to fuels and oils Retain elasticity at low temperatures (Tg ~ -68°C)
60 Shore A Fully (100 %) fluorinated Excellent resistance to fuels and oils Retain elasticity at low temperatures (Tg ~ -68°C)
70 Shore A Fully (40 %) fluorinated Excellent resistance to fuels and oils Retain elasticity at low temperatures (Tg ~ -68°C)
45 Shore A Partialy (40 %) fluorinated Good resistance to fuels and oils
65 Shore A Partialy (40 %) fluorinated Good resistance to fuels and oils
Curing Agent condensation cureCuring Agent condensation cureCuring Agent condensation cureCuring Agent condensation cureBase condensation cureBase condensation cureCuring Agent condensation cureBase condensation cureBase condensation cureBase condensation cureBase condensation cureBase condensation cureBase condensation cureBase condensation cureKit addition cure Kit addition cure Kit addition cure Kit addition cure Kit addition cure Kit addition cure Kit addition cure
24
Flame Retardants, Heat Stabilizer, Processing Aids
Silicone Rubber Color Masterbatches
Main features Supplier
Main features
Product
Product
TEGOSIL® Heatban 100
TEGOSIL® Heatban 110
TEGOSIL® Heatban 200
TEGOSIL® Heatban 400
TEGOSIL® FR 1000
TEGOSIL® HT 2000
TEGOSIL® HT 2100
XIAMETER®RBM-9000
XIAMETER®RBM-9001
XIAMETER®RBM-9002
XIAMETER®RBM-9003
XIAMETER®RBM-9004
XIAMETER®RBM-9005
XIAMETER®RBM-9006
XIAMETER®RBM-9007
XIAMETER®RBM-9008
XIAMETER®RBM-9010
XIAMETER®RBM-2600
HCR
LSR
Increase heat stabilityIncrease heat stabilityIncrease heat stabilityIncrease heat stability LSR Flame retardantHeat transferHeat transferFlame retardantanticreping agentIncrease heat stabilityIncrease green strengthIncrease green strengthFlame retardantFlame retardantImprove filler loadingAcidic by products neutralizerMold releaseAnti blooming Agent
EVONIK
DOW
Pigments dispersion in silicone polymer for solid silicone, HTV-HCR Pigments dispersion in fluids and resins for liquid silicone, LSR-RTV
Silicone Rubber Additives
25
Imprint Published by: Biesterfeld Performance Rubber GmbH
HamburgFerdinandstraße 4120095 HamburgGermanyPhone: +49 40 32008-0Fax: +49 40 32008-442
www.biesterfeld.com
Registered Office: Hamburg, Commercial Register: Hamburg, HRB 8492, VAT ID DE811186167Managing Directors: Sascha Hennig, Carsten Harms
Our raw material information, data and graphics was obtained from the records of our raw material suppliers.Local availability of products might differ from country to country.
Disclaimer:We shall not be liable for the suitability of the goods for the purpose intended by Customer, unless the achievement of a certain outcome of the utilisation was expressly incorporated into the contract. Our advice, information or recommendations regarding application shall be provided to the best of our knowledge. As the actual application is beyond our scope of influence, and as the circumstances of such application are not completely foreseeable, written and verbal indications, suggestions etc. can only be provided on a non-binding basis. They shall in particular not release Customer from the obligation to examine our products and goods for their suitability with regard to the intended processes and purposes.
26
Notes
27
Notes
Biesterfeld Performance Rubber GmbH Ferdinandstrasse 41 20095 HamburgGermany Phone: +49 40 32008 784rubber@biesterfeld.comwww.biesterfeld-performancerubber.com S
epte
mbe
r 20
19