Post on 10-Aug-2015
Parts of the lathe
machine
Rafael Castañeda
Cristian Camilo Romero
Members:
Parts of the lathe machine
Bed
It allows sliding of the tool holder.
Ways
precione glide tool holder
Spindle
This element holds the piece to work well according to what we need jira.
Tailstock, Tailstock Quill
Precione holds and exercises in working member.
He is extending the amount sierta
Carriage
Moves on the outer ways. Used for mounting and moving most the cutting tools.
• Split Nut:
It is used for cutting threads, the carriage is driven directly without using a clutch.
Is to mount the tool in the cutting bits are set
Tool post
Compound Rest:
This Mounted to the cross slide, it pivots around the tool post.
Apron:
Attached to the front of the carriage, it has controls for moving the cross slide.
Has a keyway, with two reversing pinion gears, either of which can be meshed with the mating bevel gear
Feed Rod
Lead Screw
It used to drive the clamping elements such as clamps or jaws, as well as to produce the linear displacement.
• Split Nut:
It is used for cutting threads, the carriage is driven directly without using a clutch.
Thanks